2007/2008 Sales and Technical Support Manual - Contacts

Transcription

2007/2008
Sales and
Technical Support
Manual
page
2007/2008 Sales and Tech Support Manual
This Sales and Technical Support Manual is published for the benefit of all DALBELLO bootsellers, technicians, rental operators, and other skiing
professionals. Here you find essential information to help you understand, sell, and service DALBELLO Ski Boots. We believe the more product information bootfitters and techn�
P�
If you have any comments you would like to share, please contact your DALBELLO representative, or visit us online: www.dalbello.it (international) or
www.dalbellosports.com (USA).
Additional information to help you service Dalbello ski boots may be accessed from our online technical service center:
www.dalbelloservice.com
At this website you will find Dalbello Owners Manual (PDF downloads)
the following information: Previous Year’s Technical Manuals (PDF downloads)
Spare Parts Information (PDF downloads)
Stance Geometry System Technical Information (PDF downloads)
Ski Boot Photo downloads (JPG downloads)
Corporate Logos & Advertising Materials (various formats)
Tech Manual Table of Contents
Dalbello Ski Boot Company................................................................................
3
Choosing Dalbello Ski Boots..............................................................................
Understanding Performance Group Positioning
4
Selling Dalbello Ski Boots..................................................................................
Understanding your customers ski boot needs
Advice from the professionals
Frequently Asked Questions
5
Dalbello Architecture and Technologies.............................................................
7
Dalbello Last Shape.........................................................................................
8
Trufit & Supercomfort Innerboot Technology.....................................................
Constructions & Specifications
TRUFIT Custom Fit System Procedure and Guidelines
9
I.D. THERMO Custom Fit Innerboots...............................................................
Constructions & Specifications
ID Thermo Custom Fit System Procedure and Guidelines
11
Dalbello ‘FIT FOR WOMEN” Construction & Technology................................
13
2007/2008 Dalbello Ski Boot Collection
Dalbello Freestyle for Men & Women...................................................................
14
Krypton Series for Men & Women...................................................................
16
Proton Series (Men) & Electra Series (Women).............................................
18
Reflex Series (Men) & Raya Series (Women).................................................
20
Aerro Series (Men) & Aspire Series (Women) ...............................................
22
Junior Boots ....................................................................................................
24
Rental Boots ....................................................................................................
New Vantage 4 Factor Rental System
26
2007/2008 Technical Specifications...................................................................
28
Flex Index Table and Sizing Table.....................................................................
30
Boot Sole Length Table......................................................................................
31
© Copyright 2007 Dalbello Sports.
All Rights Reserved.
page
Tanner Hall Giulio Guadalupi Seb Gardies Kent Kreitler Glen Plake Janus Hecht Shane Mc Conkey Jimmy Pacher Kim Reichhelm Mas Tsonokai
In 1974, we built the first pair of Dalbello ski boots in a small
ski boot factory in the foothills of the Italian Dolomites. Today,
as it was more than 30 years ago, our approach to addressing
the needs of skiers is exactly the same as it was at that time.
We are deeply committed to helping skiers to ski better and
have more fun. We strive to build the highest quality ski boots;
boots that look great and fit great and are loaded with authentic
performance features to make them ski great. This commitment
has made Dalbello one of the fastest growing ski boot brands in
the world.
page
Choosing Dalbello
PERFORMANCE GROUP POSITIONING
Dalbello builds skiboots for skiers of all performance and skill levels. Performance and fit characteristics are carefully enginereed into each Dalbello
skiboot, and are a function of design, architecture, last shape, and dynamic flexing characteristics. Refer to the chart below to select the Dalbello ski
boot performance group that is appropriate for your type of skiing.
FREESTYLE
TERRAIN
FLEX
LAST
MEN/ WOMEN
FLEX
98 +
millimeter
FR
FLEX
Vario
TOP PERFORMANCE
FLEX
FR
FLEX
TP
FR
TP
FLEX
98
FLEX
millimeter
FLEX
120
FLEX
HP
FLEX
SPORT COMFORT
ALLROUND
ALL MOUNTAIN
HIGH PERFORMANCE
FR
TP
HP
FR
AR
TP
HP
AR
TP
SC
HP
AR
SC
HP
FLEX
FLEX
FLEX
FLEX
101
FLEX
millimeter
FLEX
FLEX
100
FLEX
FLEX
FLEX
FLEX
FLEX
103
FLEX
millimeter
AR
80
FLEX
SC
FLEX
AR
SC
FLEX
105
millimeter
SC
65
4
page
©Scott DW Smith
Selling Skills
Understanding your customers skiboot needs
Selecting the appropriate ski boot for each customer is challenging. The more you know about your customers; their skill level, level of physical fitness, feet type,
physical attributes, prior boot fitting problems, general knowledge of ski equipment, commitment to the sport, future goals, etc., the easier, faster, and more
efficiently it will be for you to choose a suitable ski boot for them. Start by learning as much as you can about your customers:
Ask questions about their skiing skills:
1. How well do you ski?
2. Where do you ski and how many days per year do you ski?
3. Do you ski fast? Moderate speeds? Slow?
4. Which types of terrain do you prefer? Groomed, Powder, Hardpack, Moguls, Off Piste, Park & Pipe?
5. Do you, or will you, take ski lessons?
Ask questions about their ski equipment:
1. What kind of boots do you presently use? How old are they?
2. Why are you shopping for new ski boots?
3. What kind of skis do you presently use?
Probe for additional information:
1. Do you have problems with your feet?
2. Do you have problems buying other kinds of footwear?
3. Are you athletic? Do you participate in other sports?
4. How much money do you plan to spend on new ski boots?
5. Do you use orthotics or custom insoles?
Measure and observe your customer’s feet and lower legs to determine:
Foot length: Measure both feet
Foot width: narrow, average, or wide?
Instep height: High/Average/Low?
Arch: Average Height/Flat Foot?
Calf width? Thin, Average, Large, Extra Large?
Are there any protruding bones or bone spurs?
Advice from the professionals
Following are some simple tips to help you develop and improve your skills as a professional bootfitter/boot seller. Conducting yourself professionally in front of
your customers is a very positive reflection on you and your expertise, as well as on the quality and professionalism of your store. Skier’s prefer to do business
with professionals.
Know your inventory
Familiarize yourself every ski boot brand and model sold by your store. Try on evey ski boot you sell. Know which boot models are best suited for different skier
types and foot shapes. Before you recommend a particular ski boot model and size, be sure you know that it is in your store’s inventory.
Limit the number of ski boot models you recommend
Customers become confused when, in their selection process, they try on too many ski boots. You will most likely close the sale if you limit the number of ski boot
models you recommend to 2 or 3 MAXIMUM.
Make sure the size you have selected is correct
The most important service you ca�
estimated that 60% of all ski boots sold are between 1 - 3 sizes TOO BIG!!! Boots that are too big do not provide the proper support for responsiveness and control.
The innerboot materials have a tendency to break down (compress) very quickly due to the excess foot movement within the boot. Boots that are too big must be
buckled tighter than boots that fit correctly. Overtightening” produces uncomfortable, aching, cold feet.
Make sure your customer is wearing the appropriate ski sock
Ski socks should be light to medium weight, wrinkle free, and, ideally, a woven blend of synthetic and/or natural fibers. They are designed to wick moisture away
from the skin in order to keep the foot dry and warm. Socks should fit snugly and comfortably around the foot and over the leg calf. Most skiers find that ski boots
fit better and are warmer when they are warn with only one ski sock.
5
page
Selling Skills
Advice from the professional
Describe to your customer how a new ski boot should feel
You should prepare your customer for what he/she is about to feel BEFORE the ski boot is tried on. New ski boots should feel comfortable and snug. When the
knee is flexed forward, the heel should stay in the heel pocket of the boot. It is normal to feel the front of the boot when standing upright, but the toes will pull back
when the boot is buckled and the knee is flexed forward. The multi density foam fit materials in Dalbello boots are sensitive to body heat and pressure from the foot
contours. They will conform to the foot after the boot has been on the foot for 5 - 7 minutes. If a minor pressure point is initially felt, it will usually disappear within
that time. The foot should be held firmly without the need to tighten the buckles excessively. A good fit should originate from the shape of the boot matching the
shape of the foot. For TRUFIT model fitting, refer to page 10, “TRUFIT Custom Fit System Procedures”.
Explain how all features, adjustments, and mechanisms function
Make sure you take the time to fit both boots to your customer. Use the time you have to explain the buckle adjustments, and other personalization mechanisms
(forward lean, flex control, walk/ski, canting, etc.) Try to answer your customer’s questions with simple explanations.
Explain how ski boots should be cared for
Be sure to avoid walking excessively on hard or abrasive surfaces in ski boots. Otherwise, damage to the bootsole can occur over time. Ski Boots should be
cleaned ONLY with water and a mild detergent. Cleaning with other chemicals can damage the boot. Dry the boots after each use. If excessively wet inside, the
innerboots may be removed for faster drying. Avoid drying boots near radiators, fireplaces, microwave ovens, or any other sources of direct or excessive (above
45°C/110°F) heat.
Explain how ski boots should be stored at the end of the season
Make sure the entire ski boot is clean and dry....inside and out. Over a long period of time, moisture contained in the innerboots can become a breeding ground
for mold, mildew, and other kinds of bacteria. Remove the liner. Clean it and dry it. Put it back into the shell making sure that it is inserted correctly, and that the
tongue is not twisted. Buckle the boots up with buckles under loose tension. Close the Velcro powerstrap (loosely). This will keep the shell plastic in the proper
alignment to close around your foot and lower leg the next time you wear the boots. Store the boots in a cool, dry, and dark place. Do not leave them in a place
where small animals or insects may be able to nest in them.
FAQ’s (Frequently Asked Questions)
How can I verify that the ski boot size I have selected is correct ?
All Dalbello ski boots are built on the MONDOPOINT sizing scale. Mondopoint sizes can be converted to correspond closely to European, UK, and USA sizes.
Check the “SKIBOOT SIZING CONVERSION TABLE” on page 26 of the Technical Manual for more information. Size numbers are, unfortunately, only a starting
point for selecting the correct size. There is a commonly used method, or technique, in ski boot fitting to verify whether the ski boot size you have selected will
match the foot you are trying to fit. That method is referred to as ‘SHELL SIZING”. Most boot fitting professionals will check “SHELL SIZING” before fitting the ski
boot to the customer’s foot.
How can I avoid getting cold feet?
1) Make sure your boots are dry at the beginning of each ski day. Remove wet innerboots at night to dry them, but NEVER DRY INNERBOOTS ON A
RADIATOR, FIREPLACE, OR ANY OTHER SOURCE OF EXCESS HEAT. Consider using a boot drying appliance such as the Therm-IC® Boot Dryer.
2) Avoid wearing multiple pairs of socks. One pair of high performance, technical ski socks is sufficient.
3) If your foot perspires excessively, change into a dry pair of socks at midday.
4) To keep your feet warm and dry, always wear clean socks. The moisture wicking function of the socks is best when they are clean.
5) Have your boot fit checked by an expert. Too big? Too small? Pressure Points ? Is the blood circulation being restricted? Consider a custom footbed..
6) Install an electronic insole footwarmer, such as those available from Therm-IC®.
Dalbello’s “Fit for Women” program features ski models that have been specifically engineered for women.
How are Dalbello women’s ski boots different from Dalbello men’s ski boots?
All Dalbello boots “Fit For Women” feature the following women’s only characteristics:
1) All women’s model cuffs are injected with softer, more flexible plastics
2) Women’s Krypton, Electra, and Raya models feature unique cuff geometries that are lower in overall height than men’s cuffs in corresponding models.
3) All Dalbello women’s innerboots are lower in overall height than men’s innerboots.
4) All Dalbello women’s innerboots are lasted for women’s feet. They are narrower in the rearfoot, and have a more extreme taper angle from forefoot to
rearfoot.
5) All womens innerboots are constructed with more padding to reduce volume, accommodate lower volume feet, and add insulation.
6) Women’s models in Raya and Aspire series feature boot top circumference expansion adjustability.
6
page
UNDERSTANDING DALBELLO
SKI BOOT ARCHITECTURE & TECHNOLOGY
There are three basic ski boot construction architectures: Overlap (2 Piece), Cabrio (3 Piece) and Rear Entry. Different architectures are selected by ski boot
designers for the different performance characteristics, different fit and foothold characteristics, and different convenience characteristics they feature. Dalbello
produces ski boots that incorporate all three construction technologies.
CABRIO DESIGN 3 Piece Overlap
Cabrio Design - 3 Piece Overlap Construction
WHAT IS IT ?
Cabrio Design is a ski boot design architecture that that incorporates 3 structural elements - (1) lower shell, (2)
upper cuff and, (3) external shell tongue - in its structure. Developed for its fitting versatility, easy handling, and
dynamic performance advantages with modern ski shapes. Since 1995, Dalbello has been the industry’s leading
manufacturer of 3 Piece Cabrio Design technology ski boots.
WHAT DOES IT DO ?
Modern shaped skis are more responsive and easier to turn than old style long, “straight skis”. Modern skis
respond to very subtle and precise changes in angulation, edge pressure, and steering forces. Modern shaped skis
are more dynamic than old style skis, requiring a ski boot that has strong side-to-side stability along with smooth
and progressive flexibility in the forward direction. Modern skis, for most skiers, do not respond favorably to high
quantities of force and pressure that are typically characteristic of more traditional design ski boots. Cabrio Design
technology ski boots give skiers the optimal combination of support, stability, balanced stance, powerful edging
control, and dynamic response.
HOW DOES IT FUNCTION ?
Cabrio Design permits the use of stiffer and more rigid plastics in the lower shell. This strengthens the support around the foot and lower leg providing quick
response and precise transfer of power to the ski edges. This design also prevents the lower shell from distorting and bulging as the boot flexes, making the
boot more smooth and stable at high speeds and on irregular terrain. Smooth and progressive forward flex is precisely controlled using an external shell tongue.
Changing dynamic flex and performance is controlled by simply changing tongue material and geometry, or by limiting the forward movement of the boot cuff
with the flex adjustment mechan�
progressive flex. Cabrio Design technology also has a greater degree of fitting versatility than traditional ski boots . Cabrio Design is able to adapt to a wider
va�
CLASSIC DESIGN 2 Piece Overlap
Classic Design - 2 Piece Overlap Construction
WHAT IS IT ?
Classic 2 Piece Overlap design ski boots are the industry’s most common design construction. 2 Piece overlap
skiboots (sometimes referred to as “shellfit” boots) incorporate two structural elements - (1) a lower shell with
overlapping and underlapping flanges that “wrap” to adapt to different volume feet and feet shapes securing the
lower foot inside the ski boot, and (2) an upper cuff with over and underlapping flanges which, when closed, secure
the lower leg and ankle inside the ski boot.
WHAT DOES IT DO ?
Structurally, 2 piece overlap ski boots are simple constructions that are highly variable in volume. They are simple
to open and close and are designed to hold the skier’s foot and leg in a strong and balanced stance position,
permitting energy and leverage to be transferred from the skier’s feet and legs to the skis for performance and and
control.
HOW DOES IT WORK ?
The “overlapping” function of the 2 piece design allows the over and underlapping flanges of the shell and cuff to slide across one another when the buckles are
tightened, therby adapting the volume of the shell and cuff to the individual skier’s foot and lower leg.Dynamic function in these designs is regulated by changing
structural design elements (cuff and shell angle, cuff height, height of lower shell sidewalls, plastic stiffness, innerboot designs and constructions.
Dynalink - Rearfoot Retention System
WHAT IS IT ?
Dynalink is an independently functioning heel/instep closure band assembly that secures the skiers foot in the
middle and rearfoot sections of the ski boot.
KRYPTON
WHAT DOES IT DO ?
Dynalink holds the skiers foot securely toward the rear part of the ski boot. During boot flex, the Dyanlink band
does not permit the foot to slide forward or the heel to lift lifting inside the boot shell. The closure system prevents
the lower shell from bulging and distorting when the boot is flexed forward. Because the skier’s foot is held more
REFLEX & RAYA securely, high speed stability and control over the skis on irregular and difficult terrain are improved.
HOW DOES IT FUNCTION ?
Dynalink band (plastic closure strap) is fixed to the lower shell at, or near, the inside (medial) cuff hinge. The Dynalink closure buckle, on the lateral side, is attached
to the lower shell (instead of cuff). Both closure band and buckle are fixed in position on the lower shell when the Dynalink assembly is closed. Neither
component is permitted to move, either forward or up and down, with the boot cuff as the boot is flexed. The foot is, therefore, securely held in position and can
not lift of slide during skiing. This assembly also prevents the boot from bulging and distorting during skiing.
7
page
Dalbello offers a wide variety of last shapes and fitting volumes to suit skiers of all different performance levels.
Last shapes
Dalbello offers 4 different last shapes to accomodate different feet shapes with varying degrees of foot retention to perfectly match the performance and comfort
requirements of different skiers.
Last shape numbers refer to straight line measurement in millimeters inside the boot shell across the forefoot. In general, lower volume lasted boots (measurements 100 mm) fit very closely to the foot and use thinner innerboots. Their precise and sensitive fit provides very quick power transfer to the ski. Because the
fit is less forgiving, lower volume lasted boots require more time to fit than higher volume boots. Higher volume lasted boots ( 104 mm) have more space inside
the shell, permit the use of more cushioned innerboots, and are designed fot abundant cushioned comfort.
98 mm Last
101 mm Last
Lowest overall volume last in Dalbello collection. Precise and
accurate fit. Envelopes the anatomic contours of the foot and
lower leg for maximum foot retention with enhanced sensitivity
and responsiveness.
New last shape for serious performance oriented skiers.
Slightly more forefoot and ankle volume than Krypton (98mm)
provides a versatile and comfortable fit. Strong foothold with
balanced stance angle keeps the foot relaxed and stable at a
wide variety of speeds.
Proton/ Electra
Krypton
103 mm Last
105 mm Last
Extremely versatile fitting last combines an expanded volume forefoot and toe box area with a close fitting rearfoot and
ankle area. Comfortably accommodates a wide range of foot
shapes with max foothold and exceptional comfort.
Dalbello’s most accommodating fit last provides immediate
and enduring comfort. Extra shell-fit volume fits wide feet
comfortably and permits the use of softer cushioning and
insulating materials in the innerboot.
Reflex/ Raya
Aerro/ Aspire/ MX/ DX
DALBELLO 07/08 LAST SHAPE TABLE
2007/208
2007/2008
Shell Last Innerboot
Men’s Innerboot Last Shape/ Fit Volume
Women’s Innerboot Last Shape/ Fit Volume
Men’s Model Women’s Model
Width in
mm
Construction
Forefoot
Rearfoot
Calf
Forefoot
Rearfoot
Calf
Krypton Pro
98 mm
TRUFIT Comp
Medium/ Low
Tapered
Medium
Medium/ Low
Tapered
Medium
98 mm
ID Thermo Silver
Medium
Tapered
Medium
Krypton Kryzma
Krypton Il Moro
Krypton Cross
Krypton Storm
98 mm
TRUFIT Performer
Medium
Tapered
Medium
Medium
Tapered
Medium
Krypton Rampage
Krypton Lotus
98 mm
TRUFIT Sport
Medium
Medium/ Tapered
Medium
Medium
Tapered
Medium
Proton 14
101 mm
ID Thermo Gold
Medium
Tapered
Medium
Proton12
101 mm
TRUFIT Team Pro
Medium
Tapered
Medium
Proton 10
Electra 10
101 mm
TRUFIT Performer
Medium/ Wide
Medium/ Tapered
Medium
Medium
Medium/ Tapered
Medium
Proton 8
Electra 8
101 mm
TRUFIT Sport
Medium/ Wide
Medium/ Tapered
Medium/ Wide
Medium/ Wide
Medium/ Tapered
Medium
Rave
103 mm
Supercomfort
Medium/ Wide
Medium
Medium
Reflex 11
103 mm
TRUFIT Comp
Medium
Medium/ Tapered
Medium
Reflex 9
Raya 9
103 mm
TRUFIT Performer
Medium/ Wide
Medium
Medium/ Wide
Medium
Medium/ Tapered
Medium/ Wide
Reflex 7
Raya 7
103 mm
TRUFIT Sport
Medium/ Wide
Medium
Medium/ Wide
Medium
Medium/ Tapered
Medium/ Wide
Reflex 5
Raya 5
103 mm
Supercomfort
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
Aerro 90
Aspire 90
105 mm
TRUFIT Performer
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
Aerro 80
Aspire 80
105 mm
TRUFIT Performer
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
Aerro 70
Aspire 70
105 mm
TRUFIT Sport
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
Aerro 60
Aspire 60
105 mm
Supercomfort
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
Aerro 50
Aspire 50
105 mm
Supercomfort
Medium/ Wide
Medium
Medium/ Wide
Medium/ Wide
Medium
Medium/ Wide
8
page
UNDERSTANDING DALBELLO
INNERBOOT TECHNOLOGY
Adaptive Comfort “Stretch” toe box for
improved comfort and fit
Heat Moldable, microcellular ULTEVA
foam for comfortable custom fit
contouring, maximum warmth, and
resistance to packing out
Easy Slide In System to facilitate boot
entry and exit
Adaptable outer liner textiles for
improved liner to shell fit
EZ Slide in System
Easy Entry Tongue
Pull Strap
Men’s & lady’s
Cuff Profiles
TRUFIT Custom Fit
System featuring Heat
Moldable Ulteva Foam
Heat System
Ready
Construction
Adaptive Comfort
“Stretch” Toe Box
MODELS:
Proton 12 MS
MODELS:
Kr PRO
Reflex 11
Kr Kryzma LS
CUSTOM HEAT MOLDABLE
- Reduced Volume, High Performance Fit
- High Density ULTEVA (Heat Moldable) Foam
- A.C. Adaptive Comfort Toe Box
- Lycra/Mesh Easy Slide In System
- TRUFIT Performance Insole
- Heat System Ready
MODELS:
Kr Rampage
Aerro 70 MS
Reflex 7 MS
Proton 8
Kr Lotus LS
Aspire 70 LS
Raya 7 LS
Electra 8
Krypton Jakk JR
P 6 JR
- Performance/Comfort Fit
- Medium Density ULTEVA (Heat Moldable) Foam
- Faux Fur Quarter Lining & Tongue (Kryptons)
- Easy Slide In System (Others)
- TRUFIT Comfort Insole
- Heat System Ready
Microcell
Insulating Foam
footwrap
- Reduced Volume, High Performance Fit
- High Density ULTEVA (Heat Moldable) Foam
- Synthetic Leather Slide in Cuff & Tongue
- Velcro Closure
- Heat System Ready
MODELS:
Reflex 5 MS
Aerro 60/50 MS
Raya 5 LS
Aspire 60/ 50 LS
P4 SPORT JR
MENACE JR
ELLE JR
CX JR
SX 1.7 JR
- Comfort Fit
- High Cushioned Lining Textile
- Microfleece or Velvetec quarter lining (LS & JR)
- Multi Density Tec Lite Insulating Foam
- Easy Entry Tongue Pull Strap
- ThermoForm Insole
9
page
MODELS:
Kr Cross MS
Proton 10 MS
Reflex 9 MS
Aerro 90/ 80 MS
Kr Storm LS
Electra 10 LS
Raya 9 LS
Aspire 90/80 LS
- Tapered Volume, Performance Fit
- Medium Density ULTEVA (Heat Moldable) Foam
- Lycra/Mesh Easy Slide In System
- Heat System Ready
MODELS:
Mx Super MS
Dx Super MS
RX 3.8 MS
Mx Super LS
Dx Super LS
RX 3.8 LS
CXR JR
Rx 1.8 JR
- Comfort Fit
- High Cushioned Lining Textile
- Multi Density Tec Lite Insulating Foam
- Easy Entry Tongue Pull Strap
- ThermoForm Insole
- Waterproof Construction
- Anti-bacterial/ Anti- Microbial Lining Treatment
FIT SYSTEM
PROCEDURE & GUIDELINES
Before you start
For your own safety, before you use the Therm-IC® FITSYSTEM, make sure you thoroughly read and understand the instructions manual accompanying the TRUFIT boot
heating device and follow all the recommended procedures. To insure that heating temperatures and times are correct and consistent for TRUFIT Custom Fit boot models,
we recommend ONLY the Therm-IC FITSYSTEM heating device, or the INTEC LH-3 Heat Machine. DO NOT USE: OVENS, HEAT GUNS, HAIR DRYERS, or FORCED
HOT AIR SYSTEMS not designed for TRUFIT boots, as they may damage the innerboot materials. Dalbello assumes no responsibility for damage to TRUFIT innerboots
caused by improper heating, or heating with equipment not recommended by Dalbello. ANY HEATING PROCEDURES PERFORMED ON TRUFIT BOOTS WITH
HEATING EQUIPMENT OTHER THAN THAT RECOMMENDED BY DALBELLO IS PERFORMED AT THE SHOP’S OWN RISK.
WARNING about heating Junior P6 Comp with TRUFIT innerboots
Junior P6 Comp uses a unique TRUFIT innerboot construction that required less heat to mold than adult TRUFIT innerboots. Excessive heat will damage the innerboot.
DO NOT HEAT JUNIOR P6 COMP BOOTS WITH INTEC LH-3 Heat Machine.
HEAT JUNIOR P6 COMP ONLY WITH THE Therm-IC FITSYSTEM. USE HEAT SETTING 1 FOR 10 MINUTES. Follow all other fitting procedures below.
Overview of TRUFIT Heating Procedure
NOTE: HEATING PROCEDURE TEMPERATURE AND TIME ARE IDENTICAL FOR ALL TRUFIT MODELS
1. The TRUFIT Heating procedure will require approximately 20 minutes time from start to finish.
2. The Therm-IC® FITSYSTEM Heating Device warms the ULTEVA foam material (Ceramic and/or Classic) inside the innerboot to the appropriate temperature for custom
forming around the contours of the customer’s foot.
3. Though the boot feels hot to touch, there is no discomfort and no physical danger.
4. After the boots have finished their heating cycle, you have approximately 1 - 2 minutes to put the boots on the customer’s feet.
6. ULTEVA foam molds to the foot and then cools very quickly. After standing in the boots and flexing gently for 5 - 6 minutes, the TRUFIT fitting
procedure will be finished. TRUFIT boots are ready for skiing immediately after the procedure has been finished.
6. In case of a mistake or problem during heating or fitting, it is possible to repeat the heating procedure up to 3 times.
Therm-IC® Fitsystem Operation
The Therm-IC® FITSYSTEM features two conical air flow tubes that direct the warm air into the ski boot. The air flow tubes may be rotated
360° around the the main electrical casing unit and, the tubes are designed to stop at 90° intervals. Do not attempt to “spread open” the
air flow tubes. When rotating, make sure the tubes are parallel to the main electrical casing unit.
1. Plug in the power cord.
2. Place ski boots on a horizontal surface (NOTE: it is NOT necessary to remove the innerboots or the innersoles
from the innerboots for this procedure. Position the air flow tubes in the ski boots (as shown in photo)
so that the air flow tube cones are seated as deeply into the boot as possible. Gently close the buckles on the
boot cuff to hold the air flow tubes in place. Make sure that the air intake holes (visible hole on the top of the air
flow tube cone) are not blocked, covered, or in any other way obstructed.
3. Switch on the device (I = on, 0 = off)
4. Select HEAT SETTING 2 - The Therm-IC® FITSYSTEM features two programmed heat/time
cycles. HEAT SETTING 2 is a 15 minute “high heat” cycle used for TRUFIT models. This
setting is activated by pressing the RED button which illuminates a RED LIGHT during the cycle.
HEAT SETTING 1 is a 10 minute “warm/dry” cycle functioning at a lower temperature. It is
activated by pressing the YELLOW button which illuminates an ORANGE LIGHT during the
cycle. HEAT SETTING 1 will NOT activate the thermomolding properties of TRUFIT innerboots.
Dalbello assumes no responsibility for damage to ski boots caused by improper use of the
Therm-IC® FITSYSTEM.
5. Do not leave the Therm-IC® FITSYSTEM unsupervised during the heating procedure.
6. After the heating cycle ends a 10 second series of “beeps” will sound and the heat supply and
circulating fan will automatically shut off. Switch off the device and remove the tubes from the
boots. Be careful to avoid touching the tubes, as they may be hot.
7. DO NOT IMMEDIATELY REPEAT THE HEATING PROCEDURE ON THE SAME PAIR OF BOOTS.
Heating Skiboots with Custom Insoles/Orthotics
Dalbello innersoles need not be removed from the innerboots for the heating procedure. In the event a replacement custom insole or orthotic device will be used, the
standard equipment Dalbello insole should be removed before performing the heating procedure. In order to avoid heat damage to the replacement insoles or orthotic
devices, we recommend performing the TRUFIT heating procedure without the insoles inside the innerboots. You may insert the replacement insoles into the boots
immediately after the heating cycle has finished and before your customer puts on the boots. Dalbello assumes no responsibility for damage to insoles or orthotic
devices due to excessive heat or other consequences of the TRUFIT thermomolding procedure.
10
page
ID THERMO
CUSTOM FIT
LINERS
◘100% Custom Heat Moldable Ultralon® EVA foam
◘ Factory Pre-Formed for Try-On
◘ Extremely lightweight - 70% lighter than
conventional liners
◘ Easy Entry Wrap Design -- No Tongue!
◘ Highly insulated - extremely Warm
◘ Waterproof
◘ Quick to dry when wet
◘ Highly resistant to compression, or “packing out”
◘ Uniform in density - no hard spots
◘ Non absorbent - resistant to taking odor
◘ Easy to clean
◘ Re-Moldable up to 4 Times
◘ Aegis Microbe Shield - Anti Microbial Treatment
THERMO Custom Fit
GOLD
MODELS:
Kr PRO ID
THERMO Custom Fit
SILVER
& Il Moro
- Factory Pre-Formed for try-on
- Medium Density Ultralon Foam
- Microfleece Lining
- AEPE PowerWrap Reinforcement
- Krypton Insole
- Men’s/Unisex sizing 22 - 29.5
I.D. Thermo Custom Fit Liners are uniquely engineered to be the
lightest and warmest custom fit ski boot liners in the world. I.D. Thermo
Liners feature a unique “wrap” construction that uses Ultralon® EVA
foam as its principle structural material. Ultralon EVA foam is
extremely light weight and durable, and is one of the most stable and
compression resistant innerboot foam materials available.
I.D. Thermo Liners are factory heat-formed to fit precisely into each
pair of Dalbello shells. This heat molding process insures an
absolutely perfect liner-to-foot-to-shell fit. There is absolutely no
relative movement between foot, liner, and the boot shell.
The factory heat forming process enables the boots to be tried on in
the store.
For the optimum comfort and performance fit, custom heat molding to
the customers’ feet is recommended.
MODELS:
Kr Kryzma LS
THERMO Custom Fit
GOLD LADY
MODELS:
Kr IL MORO ID
Kr CROSS ID
MODELS:
Kr Storm ID
THERMO Custom Fit
SILVER LADY
- Women’s Last
- Medium Density Ultralon Foam
- Microfleece Lining
- Low Profile Cuff
- Krypton Insole
- Lady’s sizing 22 - 26.5
11
page
MODELS:
Proton 14 ID
THERMO Custom Fit
GOLD Proton
- High Density Ultralon® Foam
- QuickWick Nylon lining
- Extended Instep Wrap Panels
- Proton Insole
- Men’s/ Unisex Sizing 24 - 29.5
- Woman’s last
- TARTAN plaid lining
- Krypton Insole
- Lady’s Sizing 22 - 26.5
- QuickWick Nylon lining
- Krypton Insole
- Men’s/ Unisex Sizing 22 - 29.5
THERMO Custom Fit
HEAT MACHINE
ID Thermo Liners are factory heat formed inside the
boot shells. It is not necessary to remove liners from the
boot shells during the machine heating cycle.
CAUTION: DURING THE HEATING CYCLE THE HEAT MACHINE
COULD BECOME VERY HOT!
Please read all machine operation instructions carefully
before using
1
2
3
PANEL CONTROL
!
1 TEMPERATURE ARE PRE SET.
SHOULD NEVER EXCEED 119 C/ 240 F
2 TIME CONTROL: set for 15 Minutes. Automatic
Heat Shut Off when cycle finishes.
3 ON/ OFF CONTROL
THERMO Custom Fit
BEGIN HERE
CUSTOM FITTING DALBELLO KRYPTON
WITH ID THERMO LINERS
Make sure you have selected the correct boot size. Shell fitting is recommended. Organize all the fit materials and components you will need: Sox, Toe Caps,
Insoles or Custom Footbeds.
FITTING PREPARATION
REMOVE INSOLES FROM LINERS.
DO NOT heat liners with stock insoles inside.
PLACE SKI BOOTS ON HEAT MACHINE
SET TIME/ TEMPERATURE: 15 Minutes @ DEFAULT TEMPERATURE
Default on Thermo Machine= 1-HIGH
Default on Intuition Machine= 115° C
START MACHINE. Automatic shut off when time cycle has finished
PREPARE FEET...
Inspect Feet. Pad Bone Spurs/ Protursions/ areas of extreme sensitivity with
adhesive padding (optional). Toe Caps On. For extra toe room, use double toe caps.
Lightweight, Over-the-calf socks are recommended. Pull up tightly over the calf. No
Wrinkles!
PREPARE INSOLE/ CUSTOM FOOTBED/ORTHOTIC
If custom insole is used, make sure it is trimmed to fit. Make sure custom insole can
resist deforming under high heat.
FITTING PROCEDURE
WHEN HEATING CYCLE FINISHES, REMOVE FIRST BOOT FROM MACHINE
Immediately after heat machine “Bell Tone” or “Buzz” sounds.Re-Start the Heat
Machine leaving other boot on to heat some more while you are fitting the first boot.
RE-INSERT INSOLE INTO THE LINER
Remove the first boot from the machine and insert the CORRECT INSOLE into the
liner. Work quickly. The liner may feel HOTto handle with bare hands. Use lightweight
cotton gloves, if necessary.
FIT SKI BOOT TO CUSTOMER’S FOOT
With customer standing, guide foot into into the first boot. Instruct the customer to
bend knee forward. Pull up on rear of liner. Instruct customer to strike heel firmly
against the floor. Pull up on the rear of the liner one more time. Wrap the lower underlapping panel of the liner first. Make sure panel is smooth against instep and shin.
Wrap overlapping panel again around instep and shin. Make sure panel is smooth
(no wrinkles).
CLOSE SKI BOOT BUCKLES & VELCRO
Quickly place Krypton Tongue in correct closure position. Close Buckles. Close
Velcro Powerstrap. NOTE: During Thermo Molding - the looser the buckle closure
tension, the tighter the fit. The tighter the buckle closure tension, the looser the fit.
Skiers desiring a higher volume (more relaxed) fit, should select the .5 size in the
model and use tight buckle closure tension.
FLEX, STRIKE HEEL, STAND STILL
Instruct customer to flex aggressively 2 – 3 times and strike the foot diagonally against floor towards the heel and flat against bootsole. Instruct customer to keep weight
evenly distributed across the entire bootsole. Repeat steps 6 - 9 with the OTHER
BOOT. Fitting is complete and boots may be removed from feet in 6 - 10 minutes, or
when cool to the touch.
© Copyright 2007 Dalbello Sports. All Rights Reserved.
12
page
WOMEN’S SKI BOOTS
Dalbello’s women’s models share common constructions with the men’s
models, but are, in fact dedicated designs that feature unique dynamic
functionality specifically enginereed for the performance demands of
women skiers. Dalbello women’s boots feature lady’s only fit and function.
Dalbello women’s innerboots use unique textiles and insulating materials
that are relatively softer, warmer, and more cushioned than corresponding
men’s innerboots. In order to comfortably accomodate the specific anatomical
requirements of the women’s foot morphology, all Dalbello women’s
models feature tapered rearfoot lasting that fit women’s foot shapes, as
well as innerboot constructions that are narrower than men’s models and
feature luxurious fleece and “faux fur” lining textiles. All models in
Dalbello’s women’s collection also use structural materials that are loghter
and more flexible than those used in corresponding men’s models.
Lasy Last
High Tech Personalization
Dalbello builds its women’s boots on carefully crafted
shoe forms (lasts) that are enginereed to provide a
unique fit and size profile optimized for a women’s
unique foot characteristics. Dalbello’s “Lady Lasts” are
developed to comfortably fit the contours the foot and
to provide support and cushioning for all day comfort.
Compared with men’s last, they are narrower in the
heel, proportionally wider in the forefoot, and have a
higher instep.
All Dalbello women’s models feature a combination of
adjustments for fit and performance personalization:
forward flex control, forward lean control, boot height
adjustment, cuff volume circumference, walk/ski control, canting, fore/aft balance, heel lift, and heel hold.
Low Contour Profile Geometry
Heel Inclinator
Dalbello women’s model innerboot cuffs and rear
spoilers are .5 cm - 1.5 cm (depending on model)
lower that men’s cuffs. Low contour profile geometry
cuffs are engineered to close comfortably and easily
around a wide variety of women’s lower leg shapes
and sizes.
Select Dalbello Raya and Aspire models feature an
adjustable heel height mechanism. Raising or lowering
the heel inside the boot can improve rearfoot and
ankle comfort for some skiers. Changing foot angle
also changes fore/aft balance which can improve ski
response and turn initiation for some skiers.
Cuff Volume Expansion
X-Module
Soft, Warm Textiles
Circumference of rear cuff spoiler on RAYA models
9/7/5 may be increased to accommodate varying
lower leg volumes and/or shorter leg lengths.
All Dalbello women’s innerboots use structural
materials that are lighter and more flexible than
those used in corresponding men’s models. Women’s
innerboots feature luxurious fleece and “faux fur”
lining plus additional insulating materials fro greater
warmth, and comfortable cushioning.
Aspire models (90/80/70/60) feature a removable
cuff insert (X-Module Insert) that expands the boot
top opening circumference approximately 5 cm and
lowers the overall boot height by 1.5 cm.
13
page
ID Thermo
Custom Fit
Liners
4
Hyper Band
Closure Cuff
Flex Control
(inside boot
cuff)
3
4
Slap Ratchet
Cuff Buckle
5
Kinetic Responde
Interchangeable
Tongues
3
Dynalink
Rearfoot
Retention
System
Forward Lean
Control
2
6
7
Inverted
Forefoot
System
5
Cabrio Design
3 Piece
Tecnhology
1
Twin Axis
Canting (Shaft
Alignment)
8 “Landing Gear Footboard”
1
8
6 Modular Assembly
(Completely Disassemble)
Cabrio Design 3 Piece Technology
5
Slap Ratchet Closure
Dynalink
6
Modular Assembly
High performance shell/cuff/tongue architecture that
provides uniform foot and lower leg closure with total
support. Developed for comfortable, precise foothold with
smooth and progressive forward flex.
2
Low Cuff
Hinge
Exclusive Dalbello Technology: Independently functioning
heel/instep closure strap provides positive foothold and
rearfoot security. Dynalink effectively minimizes foot sliding,
heel lift, and boot shell distortion during flex.
To Close/Tighten: Feed the ratchet strap into the connector
assembly and tighten the strap by rotating the buckle lever
in a ratcheting manner. To Loosen/Release: pull the spring
loaded, dual pronged, connector tab vertically, and slide the
ratchet strap away from the buckle lever assembly using
one continuous motion.
(may be completely disassembled)
100% Quick Change Design. All buckles, cuffs, tongues,
spoilers, velcro, hinges, and adjustments hardware are
mounted with T-nut Bolt assembly. NO RIVETS! Boot may
be completely disassembled with allen wrenched/ hex tool
for easy customization and servicing.
Hyper Band Cuff Closure Assembly
UNIQUE DALBELLO DESIGN.Low friction, wide profile shin pad
3 closure securely wraps the upper part of the boot cuff with a high
7
Inverted Forefoot Buckle
8
“Landing Gear” Footboards
(Anti- shock)
leverage ratchet strap buckle assembly. EXTREMELY
VERSATILE FIT AND FUNCTION. The buckle may be adjusted
loosely for enhanced boot top articulation, or, snug it down
securely for more traditional all terrain performance.
I.D. Thermo Custom Fit Liners
4 I.D. Thermo “Silver” Liner with Medium Density Ultralon Foam
for comfort, warmth and shock absorption. Pre-formed to be
tried on right out-of-the-box. Or, they may be 100% custom heat
molded for a perfect custom boot fit. Ultralon® EVA foam layup is
extremely durable, and they are lightest and warmest innerboots
in the world. Easy to clean: mild detergent & water. Allow to air
dry. Avoid excessive exposure to heat. Refer to pages 11 & 12 for
more information.
Forefoot closure buckles (above instep) are inverted to close
on top of the bootshell, not on the side. The top closure positioning prevents buckle breakage and bending during rail slides,
grinds, falls, and transitions.
For enhanced shock absorption on big air landings or on hard
snow surfaces. Landing Gear footboard is a full lenght vibration
absorbing urethane innerboot platform that is positioned inside
the bootshell, under the foot. Closed cell construction will not
compress or lose its shock absorbing properties.
3
Kinetic Responde Tongues
6
Forward Lean Control
4
Flex Control
8
Twin Axis Canting
5
Low Cuff Hinge
All Refer to Krypton technology page 18
14
page
Il Moro/ Freestyle Sales and Technical Data
Freestyle Series skier profile
Developed for original and unique personalities who value individuality over conformity. Targeted for competitive advanced level freeride skiers, pros, park & pipe
specialists, and those aspiring to be. Close fitting. Quick. Responsive. Powerful. Featuring exclusive World Cup and X-Games Championship proven technology.
What are the 5 key features of Il Moro?
1. Exclusive Design - Expressly for Freestyle/Freeride
An original design - there is no other ski boot like IL Moro. More than three years in development by Glen Plake and Dalbello engineers, Il Moro has all the right
ingredients for top performance on and off piste, as well as in the park and pipe. Il Moro features 3 piece Cabrio Design architecture to cradle, stabilize, and protect
the foot while permitting a smooth and natural flex for balance and control. Highly versatile “HYPER BAND CUFF” allows the rider to easily and precisely control
boot top support and closure. Crank the slap ratchet buckle tightly for all the support and control needed for extreme big mountain riding. Lighter tension on the
buckle allows a greater range of flexing motion and leg articulation for park jibs and jumps.
2. Maximum Support, Shock-Absorption, Protection
Fundamentally developed for aggressive and competitive riders seeking to minimize the risk of injury and keep them in top riding form. Anatomically lasted shell
and innerboot forms are shaped to support and comfortably cradle the foot. Dalbello’s exclusive Dynalink System holds the foot securely and prevents it from
sliding forwards and backwards inside the shell giving the rider more stability, protection, and control. Closed cell urethane foot boards (Landing Gear) and Kinetic
Response shell tongue absorbs impacts and dissipate shocks to the foot and shin that may occur on big air landings.
3. Lightweight Construction
Cabrio design featuring lightweight and resilient Polyether (Transparent) shell, Polyurethane cuff, and Polyamide nylon tongue with super lightweight ID Thermo
Liners. Reduced weight design enhances responsiveness and sensitivity while reducing fatigue for.
4. Highly Versatile Performance and Personalization
Il Moro features the most sophisticated and versatile adjustability of any high performance ski boot on the market today. Riders may completely customize and
personalize performance. Forward flex control, forward lean control, dual axial canting, height adjustable rear cuff spoiler, interchangeable tongues, on the fly
slap ratchet cuff closure adjustability, modular arch support inserts. And... the entire ski boot may be completely and easily disassembled to permit custom boot
modifications, service, and repair.
5. I.D THERMO Custom Fit Systems
Featuring Dalbello’s 100% Custom Heat Moldable ID Thermo Custom Fit Liners. I.D. Thermo Liners feature a unique and patented “wrap” construction utilizing
anatomically heat formable Ultralon® EVA foam. I.D. Thermo Liners are precisely and accurately custom heat formed to fit every anatomic contour of the skier’s
foot and lower leg. Precise fitting cuftom fit innerboots enhance senditivity and responsiveness and provide superior shock absorption and protection.
Men’s Models
IL MORO (KR)
RAMPAGE (KR)
RAVE (RX)
UNI: 24.0 - 29.5
Transparent/ Black
UNI: 22.0 - 29.5
White/Chocolate/ Black
MS: 25.0 - 30.5
White/Chocolate/ Black
Construction
Cabrio Design, D-65 P.E. TRANSPARENT Shell
D-59 P.A.Tongue, Hyper Band Cuff Closure, Dynalink ,
F-90 Alu Buckles - 2 Micro, Slap Ratchet Cuff Buckle
Cabrio Design, D-65 P.U. Shell/Cuff, D-59 Polyamide
Tongue, Dynalink Heel Retention, F-90 Alu Buckles 3 Micro, Inverted Instep Buckle
Cabrio Design , Polytec Lite Shell/Cuff, P.U. Tongue
Dynalink System, F-90 Alu Buckles - 4 Micro Inverted
Instep Buckles, Vibram® Heels
Fit System
ID Thermo “Silver” Custom Fit Liner
TRUFIT Sport
Supercomfort Innerboot
Adjustments
Flex Control
Twin Axis Canting
Flex Control
Twin Axis Canting
Target skier
Last
Flex Index
Landing Gear Footboard
(Shock Absorbing)
Interchangeable Tongues (2)
98
(Shock Absorbing)
“Ride” Tongue - Medium Flex
98
FLEX
millimeter
VARIO
FR
FLEX
millimeter
80 - 110
FR
Women’s Models
Construction
FLEX
Fit System
Adjustments
Target skier
Last
Flex Index
FLEX
SC
TP
LS: 22.0 - 26.5
Eggplant/White
LS: 22.0 - 27.5
White/Lime Green/Black
FLEX
FLEX
Cabrio Design,
D-62 P.U. Shell/Cuff, D-59 Polyamide
HP
Tongue, Dynalink Heel Retention, F-90 Alu Buckles - 3
FLEX
Micro, Lady Profile Cuff
Cabrio Design - 3 Piece Technology, Polytec Lite Shell/Cuff,
HP
Dynalink
System, LADY CUFF, F-70 Alloy Mix Buckles - 3
Micro
FLEX
TRUFIT Sport Lady
Supercomfort Innerboot
AR
AR
VARIO
FR
FLEX
TP
HP
FLEX
RAYA 5
LOTUS(KR)
FLEX
103
millimeter
FLEX
FLEX
TP
Flex Control
Flex Control
Twin Axis Canting
FLEX
(Shock Absorbing)
98
SC
FLEX
SC
millimeter
75 - 100
FR
15
AR
Forward
Lean Control
Flex Control
103
FLEX
millimeter
65 - 85
FR
FLEX
FLEX
page
TP
FLEX
TP
Flex Control
(inside boot
cuff)
4
2
6
3
1
8
5
Low Cuff
Hinge
Cabrio Design 3 Piece Technology
Twin Axis
Canting (Shaft
Alignment)
5
High performance shell/cuff/tongue architecture that provides
uniform foot and lower leg closure with total support.
Developed for comfortable, precise foothold with smooth
and progressive forward flex.
FORWARD LEAN control wedges may inserted at boot rear
Dynalink
6 between lower shell and cuff to change forward inclination
Exclusive Dalbello Technology: Independently functioning
heel/instep closure strap provides positive foothold and
rearfoot security. Dynalink effectively minimizes foot sliding,
heel lift, and boot shell distortion during flex.
angle. There are two different FL inserts
Inclination Angles:
KR models with 4 mm insert = 15°
KR models with 8 mm insert = 13°
KR models WITHOUT insert = 11°
Interchangeable Footboards
Highly resilient polyamide (nylon), flex ribbed tongue design
stays in total contact with the leg throughout flex for improved
responsiveness and control. Interchangeable design.
Race Tongue HARD FLEX (Code “B”)
D 65 Polyamide (Tongue on Pro & Kryzma)
Ride Tongue MEDIUM FLEX (Code “C”)
D 59 P.A. (Cross, Il Moro, Rampage ,Lotus, option on Pro, Kryzma)
Soft Tongue SOFT FLEX (Code “D”)= D 52 P.A. (Storm)
7 Krypton Pro is equipped with TWO sets of footboards (located
Flex Control
8
To regulate forward flex stiffness and and range of flexing motion,
a modular FLEX CONTROL bridge inserts into rear lower shell
(behind achilles). Three flex settings:
SOFT: No Bridge Inserted
MEDIUM: Bridge inserted in LOW position.
STIFF: Bridge inserted in HIGH position.
To Adjust: pull tab forward and slide bridge up or down
inside bootshell under the liner).
POWERSOLE: High density (stiff) Urethane for power,
sensitivity, and maximum control. (Standard Footboard on
Pro, Kryzma)
LANDING GEAR: Elasticed (flexible) Urethane for
Cushions big air landings. (Standard Footboard on Il
Moro,Cross, Rampage, Lotus & Storm; optional footboard on
Pro, Kryzma)
Twin Axis Canting
Three different sizes of Cant Bushings may be interchanged
on inside and outside cuff hinges to align lateral cuff to the
skiers lower leg. For specific cant angle information, refer to
table below.
TO ALIGN CUFF TO SKIERS LOWER LEG
- 1.5°
- 3°
Cuff Hinge
16
page
C
USE # 8 FLEX CONTROL BRIDGE when:
8 mm Forward Lean Wedge is being used
Outside
C
Inside
8
B
B
B
C
Cuff Hinge
Krypton
Factory Inside Outside
Setting
B
A
A
C
C
C
Neutral
B
B
C
C
C
USE # 4 FLEX CONTROL BRIDGE when:
- NO Forward Lean Wedge is being used
- 4 mm Forward Lean Wedge is being used
8
B
4
C
4
Cuff Hinge
Inside Outside
C
When adjusting forward flex using the Flex Control Bridge system, be aware that there
are TWO DIFFERENT flex bridges. The different bridges are marked #4 and #8.
C
4
High leverage rear cuff hinges very low on the boot shell
to follow the natural anatomic movement of the leg during
dynamic flex. Skiers experience more power and more
control while expending less energy during skiing.
Kinetic Response Tongue
3
Low Cuff Hinge
B
2
7 Interchangeable Footboards
B
1
8
B
Cabrio Design
3 Piece
Tecnhology
Forward Lean
Control
B
Kinetic
Response
Tongue
B
Dynalink
Rearfoot
Retention
System
+ 1.5°
+ 3°
Krypton Series Sales and Technical Data
Krypton Series skier profile
Developed for top level�
Responsive. Powerful. Krypton is Dalbello’s top performance series featuring World Cup Racing proven technology.
tting. Quick.
What are the 5 key features of Krypton boots?
1. Cabrio Design - 3 Piece Overlap Construction
Cabrio Design derives it name from its assembly architecture, which is completely open above the instep and in front of the tibia (open top = cabrio). Cabrio Design combines a shell/cuff/tongue assembly to complete the ski boot structure. This configuration permits the use of stiffer and thicker materials for the lower shell
which amplify the skiers’ power, leverage, and energy to the ski permitting skiers to ski more powerfully and efficiently while expending less energy. The Krypton
Cabrio Design also permits the cuff & tongue of the boot to move smoothly and consistently with the leg during forward flex, while lateral & medial support remain
invariable (no shell bulge or distortion). The result: responsiveness, power, and stability with unmatched smoothness and shock absorption.
2. Dynalink Rearfoot Retention
An independently functioning heel/instep closure strap (Dynalink Band) is fixed to the inside of the boot at the hinge rivet. On the lateral side of the boot, the buckle
is mounted to the the lower boot shell instead of to the cuff, permitting the cuff to move independently of the buckle/band assembly. As the boot is flexed, foot
hold is secure and lower bootshell distortion is minimized. Dynalink provides superior foothold to skiers with lower volume feet, and/or for skiers who prefer softer
flexing boots that do not compromise positive foothold.
3. Kinetic Response Tongue
External shell tongue that is constructed from a very resilient and responsive polyamide nylon material. The KR Tongue features two molded-in “flex ribs” that
permit the tongue to close, adapt, and flex naturally with any instep height and/or leg calf circumference. Responsiveness and sensitivity are improved because
the highly resilient “KR Tongue” always stays in direct contact with the skier’s shin through flexing movement..
4. Highly Versatile Performance and Personalization
Krypton models feature the most performance adustability and personalization of any high performance ski boots available. Forward flex control, forward lean
control, dual axial canting, height adjustable rear cuff spoiler, interchangeable tongues, interchangeable footboards, modular arch support inserts. Krypton models
also feature a completely modular design - the entire ski boot may be completely and easily disassembled to permit custom boot modifications, service, and
repair.
5. TRUFIT & I.D THERMO Custom Fit Systems
All Krypton models for men and women feature TRUFIT Custom Fit Innerboots. Three different TRUFIT Constructions are featured. Different TRUFIT
constructions use different density Ulteva fitting foam for varying foothold and power transfer characteristics. All TRUFIT innerboots are designed to fit right out
of the box, or, they may be optionally custom heat molded. For 2007/2008, select Krypton models for men and women are available with Dalbello’s 100% Custom
Heat Moldable ID Thermo Custom Fit System. ID Thermo Liner Custom Fit System. I.D. Thermo Liners feature a unique and patented “wrap” construction utilizing
multiple densities of anatomically moldable Ultralon® EVA foam. I.D. Thermo Liners are precisely and accurately custom heat formed to fit every anatomic contour
of the skier’s foot and lower leg.
Men’s Models
Construction
Fit System
Adjustments
Target skier
Last
Flex Index
KRYPTON PRO
KRYPTON PRO I.D.
KRYPTON CROSS
KRYPTON CROSS I.D.
UNI: 22.0 - 29.5
Lime Green/ Black
MS: 24.0 - 29.5
Steel Grey/ Black, Red Transp./ Black
Cabrio Design, D-65 P.U. Shell/Cuff, D-65 & D-59 Polyamide Tongues (2)
Dynalink Heel Retention, F-100 Alu Buckles - 3 Micro
Cabrio Design, D-65 Polyether Shell/Cuff, D-59 Polyamide Tongues
Pro: TRUFIT Comp
Pro ID: ID Thermo “Gold”
Flex Control
FR
Twin Axis Canting
Cross: TRUFIT Performer
Cross ID: ID Thermo “Silver”
Flex Control
FR
Twin Axis Canting
98
millimeter
FLEX
Interchangeable Footboards (2)
FLEX
98
millimeter
100-140
TP
Fit System
Adjustments
Target skier
Last
Flex Index
FLEX
90-120
KRYPTON KRYZMA
KRYPTON KRYZMA I.D.
KRYPTON STORM
KRYPTON STORM I.D.
LS: 22.0 -26.5
Chocolate/ Black
LS: 22.0 -26.5
Storm Blue Transp./ White
FLEX
HP
HP
Construction
(Shock Absorbing)
TP
FLEX
Women’s Models
FLEX
FLEX
FLEX
Cabrio AR
Design, D-65 P.U. Shell/Cuff, D-65 & D-59 Polyamide Tongues (2)
Cabrio AR
Design, D-65 Polyether Shell/Cuff, D-59 Polyamide Tongues
Dynalink Heel Retention, F-100 Alu Buckles - 3 Micro, lady Profile Cuff
Pro: TRUFIT Comp
Pro ID: ID Thermo “Gold” Lady
SC
Forward
Lean Control
Flex Control
FR
Twin Axis Canting
FLEX
Cross: TRUFIT Performer Lady
Cross ID: ID Thermo “Silver” lady
SC
Forward
Lean Control
Flex Control
FR
Twin Axis Canting
98
millimeter
FLEX
FLEX
Interchangeable Footboards (2)
98
millimeter
80-120
TP
FLEX
FLEX
(Shock Absorbing)
FLEX
75-105
TP
FLEX
17
page
HP
FLEX
HP
A.S.P.
Adjustable
Spoiler Profile
3
Carbon Spoiler
Reinforcement
Twin Axis
Canting
(Shaft
Alignment)
4
5
Actiflexor Energy Booster (not
visible)
8
Classic Overlap Design (2
Piece Shellfit)
Locked Power
Cuff
1
2
6
Bi-Injected
Construction
7
Modular Heel
Cup
Proton 12 Carbon
1
Classic Overlap Design
2
Bi-Injected Construction
3
4
Adaptable to many feet shapes due to their variable volume
fitting versatility. Overlap designs hold the skier’s foot and
leg in a strong and balanced stance position, permitting
energy and leverage to be transferred from the skier’s feet
and legs to the skis for precise performance and control.
OUTSIDE
5
INSIDE
Two different density plastics fused into one structure: HARD
for control & support, SOFT for fit and comfort. Hi-tech,
bi-injected construction provides the optimum balance of
support, control, and shock absorption with flexible,
ergonomic, boot opening panels for easy-on/easy-off
convenience.
A.S.P. - Adjustable Spoiler Profile
Modular rear boot cuff spoiler adapts the boot cuff to a variety
of lower leg shapes. Spoiler Permits skiers to increase rear
cuff height, add rear support and change forward lean (1)
Remove Innerboot (2) Using 4 mm Hex Tool, remove Velcro
Strap Mounting Screw and T-Nut Assembly (3) Place the
spoiler at the desired height (LS=Low, MS=High)
4) Re-Attach Velcro & Mounting Hardware
Carbon Spoiler Reinforcement
6
Designed to add power and support to the rear cuff to improve control and responsiveness at higher speeds on hard
snow surfaces.Carbon Fiber Spoiler reinforcement is fused
into the cuff structureduring molding. A permanent bond is
formed creating total rear cuff rigidity.
18
page
Canting & Twin Axis Canting
Permits skiers to align the lateral inclination of the upper cuff
to the skier’s leg. Outside Hinge Cant: Using 5mm Hex Tool,
rotate the mechanism clockwise, or counterclockwise, to align
boot cuff to desired position (inwards/outwards)Inside Hinge
Cant :Use 4mm Hex Tool to loosen cant lock screw. (2) Rotate
adjuster to align boot cuff to desired position. Re-Tighten lock
screw.
Twin Canting only on p 12, p 10, e 10
Locked Power Cuff
(Proton 14/ 12 Carbon Only)
Upper cuff is securely fixed to the lower shell with a twin
T-Nut/Bolt assembly. The locked cuff feature boosts rear
support and minimizes rear cuff flex. Skiers find the boot is
for more responsive, more powerful, and more precise.
7
Modular Heel Cup
Insert heel cup in boot board (between shell & innerboot) to
accommodate narrow heels and to tighten rearfoot fit.
(in box)
8
(Proton 14/ 12 Carbon Only)
Electra 10 for Women
Actiflexor Energy Booster
The two lateral “actiflexors” (located behind achilles tendon
zone at rear of lower shell) store energy during boot flex and
create rebound when the boot straightens giving the skier
added power, sensitivity, and resposiveness.
Proton & Electra Series Sales and Technical Data
Proton and Electra Series skier profile
The Proton Series for Men and the Electra Series for Women were developed for accomplished and improving freeride skiers seeking a traditional 4 buckle,
classic overlap high performance ski boot that delivers firm foothold, powerful and immediate response, maximum sensitivity and unsurpassed snow feel.
What are the 5 key features of Proton boots?
1. Classic Overlap Design - Traditional 4 Buckle Shellfit
The most common ski boot construction architecture, Proton & Electra models feature a traditional 4 buckle closure overlap construction ski boot. Overlap Design
refers to the functionality of the boot’s lower shell and upper cuff. Both structural components incorporate overlapping flanges, or panels, that slide across one
another closing the boot around the foot when the boot buckles are tightened. Different feet shapes and volumes are comfortably accommodated by varying the
closure volume of the plastic shell and cuff around the foot and lower leg. Classic Overlap ski boots are efficient constructions that provide an accurate and precise
fit with exceptional power and control for the skier.
2. Bi-Injected Construction
All Proton and Electra models feature high tech, state of the art, bi-injection technology that integrates two different density materials into a single structure.
Flexible and resilient polyether plastic surrounds the foot. Its elastic wrapping properties provide shock absorption as well as uniform foot closure for a precise and
comfortable fit. A harder polyurethane plastic surrounds and reinforces the softer “under shell” in the critical support zones, providing power, rigidity, and support
for maximum performance and control. The result: a perfect blend of precise fitting power, comfort, and shock absorption.
3. Balanced Stance
All Proton and Electra models feature a “new tech” relaxed stance featuring a lower heel and more upright cuff angle than that typically found in conventional
high performance ski boots. This “new tech” balanced stance facilitates movement patterns that make skiing easier, less fatiguing, and more comfortable.
This is the NEW stance geometry that better skiers have discovered makes their new skis perform better.
4. High Performance 101mm Last. Fits Medium Volume Feet
Proton models for men feature Dalbello’s new 101 mm last; a modern last shape generous in forefoot volume for comfort, but featuring an extreme taper in the
rearfoot for superior foothold and support. The fit and foothold is very versatile. Electra models for women feature Dalbello’s new, WOMEN’S SPECIFIC, performance last that is slightly lower in overall volume and height to accommodate the morphological differences in women’s feet and lower leg anatomy.
5. TRUFIT Custom Fit Systems
All men’s and women’s Proton and Electra (except on Proton 14 I.D. Carbon) models feature TRUFIT Custom Fit Innerboots. TRUFIT is the industry’s most widely
imitated ski boot custom fit system.TRUFIT innerboots are engineered to fit the skier correctly and comfortably right out of the box. Or, the innerboots may be
custom heat formed with a quick and easy heat molding procedure performed in the ski shop. The new Proton 14 Carbon features Dalbello’s 100% Custom Heat
Moldable ID Thermo Custom Fit System. I.D. Thermo Liners feature a unique and patented wrap construction utilizing multiple densities of anatomically moldable
Ultralon® EVA foam. I.D. Thermo Liners are precisely and accurately custom heat custom heat formed to fit every anatomic contour of the skier’s foot and lower leg.
PROTON 14 CARBON ID
PROTON 12 CARBON
PROTON 10
MS: 24.0 - 29.5
Lime Green/ Black Transp
MS: 24.0 - 29.5
White/ Black Transp
MS: 24.0 - 29.5
Black/ Lime Green Transp.
White/ Orange Transp
Construction
Classic Overlap, Bi-Injected D-65 P.U. / D-62 Polyether,
Locked Cuff Carbon Spoiler, F-100 Alu Buckles - 4 Micro
Locked Cuff Carbon Spoiler, F-100 Alu Buckles - 4 Micro
F-100 Alu Buckles - 4 Micro
Fit System
ID Thermo “Gold” Custom Fit (High Density)
FLEX
Adjustments
Twin Axis Canting
A.S.P. -FR
Adjustable Spoiler Profile
Modular Heel Cup Inserts
Men’s Models
101
Target skier
Last
Flex Index
TRUFIT Team Pro Comp
(High Density/ Reduced Volume Fit)
Twin Axis Canting
A.S.P. -FR
101
FLEX
millimeter
130
TP
FR
TRUFIT Performer
FLEX
HP
FLEX
Women’s Models
FLEX
Classic Overlap, Bi-Injected D-59 P.U. AR
/ D-59 Polyether,
FR
TRUFIT Sport
FLEX
Canting (lateral)
TP
120
TP
101
millimeter
90
HP
100
HP
FLEX
FLEX
ELECTRA 8
HP
LS: 22.0
- 27.5
Black/ White
AR - 27.5
LS: 22.0
White/ Yellow transp.
Black/ Storm Blue transp.
FLEX
FLEX
FLEX
Classic
Overlap, Bi-Injected D-59 P.U. / D-59 Polyether,
SC
F-90 Alu Buckles - 4 Micro, Lady Profile Cuff
Fit System
TRUFIT Performer Lady
TRUFIT Sport Lady
Adjustments
SCCanting
Twin Axis
Flex adjusted for Women
A.S.P. -FR
FLEX
Target skier
Last
Flex Index
FLEX
95
101
millimeter
FLEX
85
HP
FLEX
FLEX
page
HP
FLEX
Canting (Lateral)
Flex adjusted for Women
TP
FLEX
TP
19
FR
FLEX
101
millimeter
FLEX
AR
FLEX
millimeter
ClassicAR
Overlap, Bi-Injected D-62 P.U. / D-62 Polyether,
F-100 Alu Buckles - 4 Micro, Lady Profile Cuff
Construction
SC
FLEX
101
FLEX
ELECTRA 10
MS: 24.0 - 29.5
Black/ Red Transp.
White/ Yellow Transp
FLEX
Twin Axis Canting
ModularTP
Heel Cup Inserts
millimeter
FLEX
PROTON 8
FLEX
AR
Reflex 11 for Men
1
Microadjustable
Flex Control
Easy Entry
Tongue
Pull Strap
8
Microadjustable Flex Control
Adjustment to control progressive forward flex. Use
the 4mm HEX TOOL to slide the adjustment spindle
UPWARD towards boot top (HARD), or DOWNWARD
(SOFT). When the desired forward flex has been
achieved, lock the spindle in place using the hex tool.
(REFLEX 11 ONLY)
Forward Lean Control - insert
2
2 Forward lean angle may be changed by placing FLC
insert between rear cuff and lower shell platform. Flex
Control Mechanism may need to be loosened before inserting FLC wedge. Range of Forward Lean:
Without Insert = 11
With 3mm insert = 14
Dynalink
Rearfoot
Control
Forward
Lean
Control
4
3 2 Position Flex + WALK Mechanism
Two position flex selectivity (HARD & SOFT) plus a
WALK/SKI feature. HARD mode is recommended for
more aggressive skiers, and is approx. 15% stiffer in
forward flex than the SOFT mode. The WALK setting
disengages the cuff lock function to allow the cuff to
hinge backwards for ease of entry and exit. DO NOT
SKI WITH BOOT IN WALK MODE. (REFLEX 9, 7, 5 & ALL
2
RAYA MODELS)
4
5
7
Canting
(Shaft
Alignment)
Ramp Angle
Inclinator
Raya 9 for Lady
5
Cuff Volume
Expansion
Adjustment
(Featuring Unique Lady’s Cuff Construction)
6
Easy Entry
Tongue
Pull Strap
8
2 Position
Flex Control
+ Walk/ Ski
Mechnism
4
Canting
(Shaft
Alignment)
7
Ramp Angle
Inclinator
20
page
Canting & Shaft Alignment
To align the boot cuff comfortably to the skiers leg.
Use the 5 mm Hex Tool to adjust. Rotate the mechanism clockwise to tilt the cuff towards the inside edge,
or counterclockwise to tilt the cuff towards the outside
edge.
7
Ramp Angle Inclinator
8
Easy Entry Tongue Pull Strap
+ 5
Heel/Instep closure assembly to control foothold and
stability. Heel closure band and buckle are fixed to lower
shell (instead of cuff) to hold the foot firmly and minimize
shell distortion during boot flex.
6
2
Dynalink
Rearfoot
Control
Dynalink
RAYA MODELS ONLY - Rear cuff spoiler may be adjusted to accommodate varying lower leg volumes and/or
shorter leg lengths. To Increase Cuff Volume Circumference: Remove both spoiler adjustment T-Nut screws.
Move spoiler to the “open” (wide) position. Replace tnuts/screws in the second set of corresponding holes.
Raising or lowering the ramp angle inclinator (heel lift) can
improve heel and ankle comfort for some skiers with boot
fit problems. It may be necessary to experiment with this
adjustment to find the proper position for optimum balance
and control. To adjust: Use the 4mm Hex Tool to turn
the adjustment screw on the lateral side of the bootsole.
CLOCKWISE to raise, COUNTERCLOCKWISE to lower.
High strength nylon web pull strap is integrated into the rim
of the innerboot tongue to help pull the boots on easily.
WARNING: DO NOT CARRY ski boots by the
Easy Entry Tongue Pull Strap.
Reflex and Raya Series Sales and Technical Data
Reflex & Raya Series skier profile
Developed for ambitious and athletic performance oriented freeskiers seeking versatile fit and balanced stance. Two unique performance architectures to
accommodate skiers of all skill levels: PERFORMANCE (Reflex 11) for powerful and precise energy transmission, and SPORT (Reflex 9/7/5 & all Raya
models for women) for all day comfort and control.
What are the 5 key features of Reflex & Raya boots?
1. Cabrio Design - 3 Piece Overlap Shellfit
Reflex for men and Raya for women models feature “Cabrio Design Architecture”. Cabrio Design features an open throat “cabrio” lower shell & tongue assembly
for more fitting versatility to�
laterally supportive lower shell f�
naturally balanced stance and greater comfort.
2. Two Performance Constructions
Select Reflex models for men (9/7/5) and all Raya models for women feature “SPORT CUFF” construction that provides fitting versatility for all leg shapes with
stability, support, and exceptional comfort. Reflex and Raya “Sport Cuff” models are among the easiest handling boots available with a wide opening design
that is easy to put on and take off. All “Sport Cuff” models feature two position flex control plus integrated WALK/SKI mechanism as standard equipment.
The Reflex 11 �ex 11
features a lower volume fit, more rearfoot support, micro adjustable forward flex control, forward lean control, and a shaft alignment (cuff cant) mechanism.
3. Dynalink Rearfoot Stabilizer
An independently functioning heel/instep closure strap (Dynalink Band) is fixed to the inside of the boot at the hinge rivet. On the lateral side of the boot, the buckle
is mounted to the the lower boot shell instead of to the cuff. permitting the cuff to move independently of the buckle/band assembly. As the boot is flexed, foot
hold is secure and lower bootshell distortion is minimized. Dynalink provides superior foothold to skiers with lower volume feet, and/or for skiers who prefer softer
flexing boots that do not compromise positive foothold.
4. Special Lady’s Only Fit & Function
All Raya models feature special “Lady’s Only” fit and function. (1) Special innerboot construction with soft, warm, and comfortable PlushLiner (faux fur) or
Microfleece linings, (2) Tapered innerboot geometry to accommodate lower volume foot shapes and narrower achilles tendons. (3) Special Women’s Only Cuff
that is 1.5 cm lower than the comparable men’s version and features a cuff volume expansion adjustment to easily and comfortably accommodate a wide variety
of womens lower leg sizes and shapes.
5. TRUFIT Custom Fit Systems
Reflex and Raya 11/ 9/ 7 models feature TRUFIT Custom Fit Innerboots. TRUFIT is the industry’s most widely imitated ski boot custom fit system. TRUFIT
innerboots are engineered to fit the skier correctly and comfortably right out of the box. Or, the innerboots may be custom heat formed with a quick and easy
heat molding procedure performed in the ski shop.
REFLEX 11
REFLEX 9
REFLEX 7
FLEX
MS: 25.0 - 30.5
Red Transp./ White
MS: 25.0 - 30.5
FR Red Transp.
Black/
Construction
FLEX
Cabrio Design - 3 Piece Technology,
D-62
Polyesther Shell/ Cuff, Dynalink System,
Fit System
TRUFIT Comp
FLEX
(High Density/ reduced Volume Fit)
FLEX
D-59
Polyurethane Shell/ Cuff, Dynalink System,
Men’s Models
FR
Adjustments
Target skier
Last
Flex Index
Flex Control
TP
Ramp
Angle Inclinator
103
TP
TRUFIT Performer
Canting
2 Position Flex Control
Walk/ Ski Mechanism
HP
FLEX
millimeter
100-115
HP
millimeter
80-100
AR
Women’s Models
Construction
Fit System
Adjustments
Target skier
Last
Flex Index
SC
FLEX
Polytec Lite Shell/ Cuff, Dynalink System,
F-70 Alloy Mix Buckles - 4 Micro
TP
FLEX
Walk/ Ski Mechanism
HP
FLEX
millimeter
75-95
AR
103
FLEX
LS: 23.0 - 27.5
FR
White/
Chocolate
75-95
AR
FLEX
RAYA 5
FLEX
SC
LS:
23.0 - 27.5
White/
Silver/ Storm Blue
FR
White/ Light Purple
FLEX
millimeter
FLEX
RAYA 7
SC
FLEX
Canting
FLEX
RAYA 9
FLEX
MS: 25.0 - 30.5
Steel Grey/ Orange
FR
Transp.
Supercomfort
FLEX
103
FLEX
FLEX
AR
TP
Walk/
Ski Mechanism
HP
Canting
103
FLEX
Polytec Lite Shell/ Cuff, Dynalink System,
TRUFIT Sport
FLEX
REFLEX 5
FLEX
MS: 25.0 - 30.5
Black/ Orange Transp.
FR
White/ Steel Grey
FLEX
SC
LS:
22.0 - 27.5
White/ Vino Rosso
FR
Black/ Storm Blue
FLEX
FLEX
FLEX
D-59
Polyurethane Shell/ Cuff, LADY CUFF,
Polytec Lite Shell/ Cuff, LADY CUFF,
Polytec Lite Shell/ Cuff, LADY CUFF,
Dynalink System, F-90 Alu Buckles - 4 Micro Dynalink
TP System, F-90 Alu Buckles - 4 Micro Dynalink
TP System, F-70 Alloy Mix Buckles - 4 Micro
TP
TRUFIT Sport Lady
FLEX
Supercomfort
FLEX
FLEX
Walk/ Ski Mechanism
HP
Canting
103
millimeter
Walk/
Ski Mechanism
HP
FLEX
75-95
AR
21
AR
Canting
103
millimeter
FLEX
65-85
Walk/
Ski Mechanism
HP
103
millimeter
FLEX
page
SC
SC
65-85
AR
FLEX
FLEX
FLEX
SC
1
Easy Entry
Tongue
Pull Strap
6
Macro
Adjustable Rack
Positioning
4
X-Module Cuff
Volume Expansion
Insert
Low Contour Profile
(on Aspire models)
1
2 Position Flex
+ Walk/ Ski
Mechanism
2
2
7
Bi-Injected
Contruction
5
3
Ramp Angle
Inclinator
Aspire 90 for Women
1
X-Module Cuff Volume
Expansion
Men’s
All Aerro and Aspire models feature a unique two
piece boot cuff construction that can accommodate
a wide variety of leg calf volumes or tibia lengths by
removing the insert module. Removing the X-MODULE expands the boot top opening circumference
by approximately 5 cm, and lowers the overall boot
height by approximately 2 cm. The X-MODULE Insert should be removed ONLY if more cuff volume
is required for fit or comfort, or if a lower boot cuff is
desired for better performance or fit.
2
3
+
-
2 Position Flex + WALK Mechanism
Two position flex selectivity (HARD & SOFT) plus a
WALK/SKI feature. HARD mode is recommended for
more aggressive skiers, and is approx. 15% stiffer in
forward flex than the SOFT mode. The WALK setting disengages the cuff lock function to allow the cuff to hinge
backwards for ease of entry and exit. DO NOT SKI WITH
BOOT IN WALK MODE.
Raising or lowering the ramp angle inclinator (heel lift) can
improve heel and ankle comfort for some skiers with boot
fit problems. It may be necessary to experiment with this
adjustment to find the proper position for optimum balance and control. To adjust: Use the 4mm Hex Tool to turn
the adjustment screw on the lateral side of the bootsole.
CLOCKWISE to raise, COUNTERCLOCKWISE to lower.
22
page
4
Lady’s
5
Low Contour Profile
(Aspire for Women)
Specifically designed innerboot rear cuff profile
geometry for Aspire Women’s boot models. LCP
model innerboots also features: narrower last shape,
soft “Faur Fur” or Microfleece cuff lining and extra
cushioning.
Bi injected Construction
Two different density plastics fused into one structure.
Hard for control & support. Soft for fit and comfort.
Hi-tech, bi-injected construction provides the optimum
balance of support and control with flexible, ergonomic,
boot opening panels for easy-on/easy-off convenience.
6
Easy Entry Tongue Pull Strap
7
Macroadjustable Rack
Repositioning
High strength nylon web pull strap is integrated into the
rim of the innerboot tongue to help pull the boots on
easily. WARNING: DO NOT CARRY ski boots by the
Easy Entry Tongue Pull Strap.
Three interchangeable rack slots enable buckle racks to
be easily repositioned to accommodate varying leg shapes
and circumferences. There is a 70 mm range of adjstment.
Use 3mm Hex Tool, to remove rack locking screw.
Aerro & Aspire Series Sales and Technical Data
Aerro and Aspire Series skier profile
Recreational and sport skiers looki�
take off, provides all day comfort and warmth, and features functional, easy to use adjustments.
What are the 5 key features of Aerro and Aspire boots?
1. Bi-Injected Construction - Easy Entry Overlap Shellfit
Aerro and Aspire models 90, 80, 70, 60 & 50 integrate state of the art, bi-injection technology that fuses two different density materials into a single structure. A
resilient, soft durometer plastic surrounds the foot. The flexible material permits the lower shell to open very wide permitting very easy boot entry, exit, and boot
cloure The flexible and elastic wrapping properties of the softer plastic material provide uniform foot closure for a precise and comfortable fit. A harder durometer
plastic material is injected over the softer material in the critical support zones providing power, rigidity, and support for maximum performance and control. The
result: a perfect blend of precise fitting power, comfort. Performance personalization and handling convenience is further enhanced by the ergonomic 2 Position
Flex Mechanism with Walk/Ski function.
2. X-Module Cuff Expansion
Aerro and Aspire cuffs are modularly constructed in 2 pieces to adapt to a wide range of lower leg sizes, shapes, and lengths. The X-MODULE (plastic cuff height
extension piece) insert, which is attached along the boot cuff perimeter, may be removed to expand the boot top opening circumference. When removed, opening
circumference is approximately 5 cm larger (wider), and boot height is approximately 2 cm lower. The X-MODULE Insert should be removed ONLY if more cuff
volume is required for fit or comfort, or if a lower boot cuff is desired for better performance or fit.
3. Aspire: Special “Fit for Women” Design
Aspire models for women are specifically engineered to accommodate womens unique leg and foot anatomies. All Aspire models feature: Low Contour Profile
(LCP) innerboot and shell cuff geometries which lower rear boot height to comfortably accommodate lower and/or wider leg shapes, softer flexing boot cuffs,
narrower innerboot last shapes, X-Module (see above) Cuff Volume Expansion, Microfleece or PlushLiner Faux Fur (on select models) lining textiles for warmth
and comfort, and microadjustable ramp angle inclinator mechanisms for more precise rearfoot fit and adjusting fore/aft balance for better skiing performance.
4. 105 mm Comfort Last - Fits Medium - Wide Volume Feet
Aerro and Aspire models feature Dalbello’s 105 mm “Relaxed Fit” comfort last shape. Targeted for comfort and convenience, the fit is medium to wide, and was
developed to comfortably accommodate feet with average to above average pronation.
5. TRUFIT Custom Fit System
Select Aerro and Aspire models feature TRUFIT Custom Fit Innerboots. TRUFIT innerboots incorporate anatomically heat moldable ULTEVA foam constructions.
TRUFIT innerboots are designed to fit right out of the box , or, they may be optionally custom heat molded. (see TRUFIT Fit System Procedure for more information
- Page 10).
FLEX
FLEX
AERRO 90 & 80
Men’s Models
Construction
Fit System
Adjustments
Target skier
Last
Flex Index
FLEX
FLEX
2 Position Flex Control Walk/Ski Mechanism
X-Module Cuff Volume Expansion
HP
105
millimeter
70-90
Women’s Models
Construction
Fit System
Adjustments
Target skier
Last
Flex Index
FLEX
FLEX
Classic Design - 2 Piece Overlap,
Bi-Injected P.E. D59/P.U. D 59 , Easy Entry,
90: F-100 Alu Buckles - 4 Micro
80:TP
FLEX
HP
105
millimeter
65-85
FLEX
MS:
TP25.0 - 31.5
Black/Silver
FLEX
FLEX
TRUFIT Sport
Supercomfort
Supercomfort
Steel grey/ black transp.
TP
Black/
white
FLEX
FLEX
2 Position Flex Control Walk/Ski Mechanism 2 Position Flex Control
Walk/Ski
X-Module
AR Mechanism
AR
105
millimeter
FLEX
105
millimeter
FLEX
SC
60-80
SC
AR
FLEX
FLEX
50-70
LS: 23.0 - 27.5
White Ice/ Oyster
Transp.
TP Silver/ light purple
Transp./ Black
FLEX
Bi-Injected Polytec Lite, Easy Entry
F-80
Alu Buckles - 4 Micro, Lady Profile
HP
TRUFIT Sport Lady
FLEX
X-Module
AR
55-75
SC
23
FLEX
SC
50
FLEX
Classic Design - 2 Piece Overlap, Easy
Entry, Bi-Injected Polytec Lite, F-60 Alu
Buckles
HP - 2 Micro/ 2 Macro, Lady Profile
LS: 23.0 - 27.5
White/
Storm Blue
TP
Black/ oyster
Classic Design - 2 Piece Overlap Auto
Instep, Easy Entry, F-60 Polycarbonate
Buckles
HP - 2 Micro/ 2 Macro, Lady Profile
FLEX
Supercomfort Lady
Supercomfort Lady
FLEX
LS: 23.0 - 27.5
Black/
Storm Blue
TP
White/ Gold
FLEX
FLEX
FLEX
Walk/Ski
Mechanism
AR
FLEX
105
millimeter
FLEX
ASPIRE 50
ASPIRE 60
FLEX
105
millimeter
FR
FR
page
SC
FLEX
Classic Design - 2 Piece Overlap Auto
Instep, Easy Entry, F-60 Polycarbonate
HP - 2 Micro/ 2 Macro
Buckles
FLEX
AR
FLEX
HP
F-60
Alu Buckles - 2 Micro/ 2 Macro
ASPIRE 70
LS:SC
23.0 - 27.5
90: Storm Blue Transp./ silver
FR
80: Silver/ Storm Blue
AERRO 50
MS: 25.0 - 31.5
FR
FLEX
ASPIRE 90 & 80
FLEX
White/ Black transp.
Silver/
TP Black transp.
Black/ White
FLEX
F-80
Alu Buckles - 4 Micro
HP
FLEX
AR
FR
AERRO 60
FLEX
MS: 25.0 - 31.5
FLEX
Bi-Injected P.E. D59/P.U. D 59 , Easy Entry,
90: F-100 Alu Buckles - 4 Micro
80:TP
TRUFIT Performer
FR
FR
AERRO 70
MS: 25.0 - 31.5
90: Lime Green Transp.
FR
80: Black/ Orange Transp.
FLEX
105
millimeter
SC
AR
105
millimeter
FLEX
45 - 65
SC
FLEX
45
Low Contour Profile Cuff
Geometry accomodated
shorter leg
TRUFIT Custom
Fit Innerboots
Classic High Performance Ovelap
Design (4 Buckle)
High tech
Bi-Injected
Polyurethane/Polyether
Construction
Convenient Soft
Entry System
Forward Lean
Control
High leverage,
Ergonomic
Microadjustable
Alumium Buckles
P 6 Comp
P4 SPORT/ MENACE/ ELLE
KRYPTON JAKK
P6 COMP
Models
JR: 22.0 - 27.5
White/ Chocolate
JR: 19.0 - 26.5
White/ Black Transp
Construction
Cabrio Design, D-59 P.U. Shell/ Cuff, D-52 Polyamide Tongue, Dynalink Heel Retention, F-100 Alu Buckles - 3 micro
Classic Overlap Design, Bi-Injected Construction,
Polyurethane/ Polyester Transparent, Easy Entry,
PJ4 Alu Buckles - 4 Micro
Fit System
TRUFIT Sport Junior
TRUFIT Sport Junior
FLEX
Adjustments
Flex Control
Twin Axis Canting
Shock Absorbing Footboard
Junior Adjusted Flex Tongue
FR
101
millimeter
Target skier
Flex Index
FLEX
70-100
TP
FLEX
JR: 23.0
TP - 26.5
CX 3: Black/ Silver
FR
CX 3 Gaia: White/ Storm Blue
Models
HP
Fit System
AR
Adjustments FR
Ratchet Top Cuff Closure Buckle (not in USA)
HP
FLEX
Target skier
Flex Index
SC
TP
30
AR
FLEX
SC
FLEX
HP
FR
Ratchet Top Cuff Closure Buckle
AR
FR
24
AR
CX 2
SC
HP
HP
FLEX
FLEX
FLEX
SC
Total Wrap Ratchet
AR
1 Buckle
Closure
FLEX
FLEX
TP
FLEX
20
SC
FLEX
HP
FLEX
FLEX
FLEX
Sizes:
22.0 - 26.5
40
FLEX
FLEX
HP
Polytec
Lite AR
SC
Rear Entry Design
FLEX
FLEX
FLEX
JR: AR
14.5 - 25.5
Black/TP
Silver
Silver/ Steel grey
CX 1
20
30
FLEX
Super Comfort RE Jr.FLEX
page
HP
SX 1.7
FLEX
Sizes:
19.0 21.5
TP
HP
FR
FLEX
FLEX
25
SC
TP
FLEX
FLEX
HP
SC
SC
FLEX
TP
FLEX
FLEX
FLEX
3 Piece
Cabrio
Design, Polytec Lite
AR
AR
Easy Entry , GTR Polycarbonate Buckles FLEX
FLEX
CX 2: 2HP
Buckle Closure
CX 1: 1 FLEX
Buckle Closure
Super Comfort Jr. FLEX
FLEX
FLEX
SC
FR
FR
FLEX
AR
FLEX
FLEX
FLEX
FLEX
TP
Sizes:
22.0 - 26.5
60TP
FLEX
FLEX
FLEX
CX 2 JR: 19.0 - 22.5
CXHP
1 JR:HP14.5 - 18.5
FLEX
FLEX
3 Piece Cabrio Design, Polytec Lite
HP
Easy Entry , Dynalink Rearfoot Retention
FLEX
GTR Polycarbonate
Buckles - 3 Buckle
Closure
TP
Super Comfort Jr. FLEX
FLEX
50
FLEX
CX 2 TP
& 1: Black/ Silver
CX 2 & 1 Gaia: White/ Storm Blue
FLEX
Construction
FLEX
Sizes:
19.0 21.5
TP
TP
FR
FLEX
CX 3
FR
FR
FR
FLEX
Classic Overlap Design, Bi-Injected Construction,
Polytec lite/ Polytec liteTransparent, Easy Entry,
PJ1 FR
Polycarbonate Buckles - 4 Micro
Super Comfort Junior
FLEX
FLEX
FLEX
FLEX
FLEX
FLEX
FR
JR: 19.0 - 26.5
Black/ Orange, White/ Chocolate
White/ Storm Blue Transp
RENTAL
Waterproof Innerboot
Construction
Bar Code Ready
Construction
Extra High Volume Cuff Design
comfortably accomodates hard
to fit leg shapes.
Easy Entry
Tongue Pull Strap
Walk/Ski
Mechanism
with 2 Position
Forward
Lean Control
Extra Long (140 mm)
Ratchet Strap
Buckle Closure
Durable Polycarbonate
Buckles with High
Hinging Covers
Mondo Sizing
22 - 33 (U.S. Size 15)
MX SUPER RENTAL
Heavy Duty
Replacement Heel & Toe
Inserts
RX 3.8
MX SUPER
DX SUPER
MS: 25.0 - 32.0
LS: 22.0 - 27.5
MS: Black, LS: Black
MS: 25.0 - 31.0
LS: 22.0 - 27.5
MS: Steel Grey, LS: Steel Grey
Construction
Classic Design 2 Piece Overlap, D-59 Polyurethane
Easy Entry, High Volume Cuff Geometry,
Axxo P.C./Steel Buckles, 140 mm Ratchet Band Buckles (2)
Vibram® Replacement Heels (USA & Canada Only)
BAR CODE READY
Classic Design 2 Piece Overlap, Easy Entry,
High Volume Cuff Geometry, D-59 Polyurethane Shell
/ Polytec Lite Cuff, Axxo P.C./Steel Buckles, 140 mm
Ratchet Band Buckles (2)Vibram® Replacement Heels
(USA & Canada Only), BAR CODE READY
Rear Entry Design
D-59 Polyurethane Shell / Cuff
Easy Entry, High Volume Cuff Geometry
Ratchet Buckle Closure - 1 Buckle
Fit System
Super Comfort Rental
Waterproof, Sanitized® Anti-Bacterial
Adjustments
Walk/Ski Mechanism
2 Position Forward Lean Control
Models
Models
Construction
Fit System
Adjustments
MS: 25.0 - 33.0
LS: 22.0 - 27.5
MS: Steel Grey, LS: Silver
Forefoot Volume Adjuster
CXR 3
CXR 2/ CXR 1
JR: 23.0 - 26.5
Silver/Red
JR: 19.0 - 22.5 (CXR 2)
JR: 14.5 - 18.5 (CXR 1)
Silver/Red
RX 1.8
JR: 14.5 - 25.5
Black
Cabrio Design, 3 Piece Easy Entry
D 59 Polyurethane Shell / Polytec Lite Cuff
Dynalink Heel Retention System
GTR Polycarbonate Buckles - 3 Buckle Closure
Ratchet Closure Buckle - Top Buckle, BAR CODE READY
Cabrio Design, 3 Piece Easy Entry
D 59 Polyurethane Shell / Polytec Lite Cuff
GTR Polycarbonate Buckles
Ratchet Closure Buckle - Top Buckle
BAR CODE READY
Rear Entry Design
D-59 Polyurethane Shell / Cuff
Easy Entry, Soft Flex
Ratchet Buckle Closure - 1 Buckle
CXR 2 - 2 Buckle Closure
CXR 1 - 1 Buckle Closure
25
page
RENTAL
The Vantage Rental boot has been uniquely engineered for outstanding comfort, ease of handling, warmth, and durability.Featuring Dalbello’s
new 4 FACTOR SYSTEM TECHNOLOGY. The 4 Factor System is a unique boot sole sizing system that has been developed to provide a new
level of speed and efficiency in rental equipment management and handling.
Waterproof Innerboot
Construction
Extra High Volume Cuff Design comfortably accomodates hard to fit leg shapes.
integrated
Bar Code
Easy Entry
Tongue Pull Strap
Ergonomic
Walk/Ski
Mechanism
Extra Long (140 mm)
Ratchet Strap
Buckle Closure
Low Cuff
Hinge for
Easy Entry &
Easy Flex
4 Factor System
Color Coded Buckle
Racks
Easy Open/ Close
Extended length
Buckle Levers
(Cuff Buckles)
Durable Polycarbonate
Buckles
Mondo Sizing
23 - 34.5 (U.S. Size 16)
Heavy Duty
Replacement Heel
& Toe Inserts
4 Factor System
Only 4 Boot Sole Lenght
Vantage Rental
High Visibility Color
Coded Sizing
Comfort Fit Innerboots
320 mm
Easy Handling
Mid Entry Design
370 mm
320 mm
370 mm
320 mm
370 mm
290 mm
350 mm
290 mm
350 mm
350 mm
290 mm
New - 4 Factor System
Vantage/ 4 Factor is available in 12
different shell sizes, but, uses ONLY
FOUR BOOTSOLE LENGTHS for the
entire series. Fewer boot sole lengths
mean faster adjustments and fewer
mistakes.
4 Factor System boot sole lengths are
easily identifiable using a color coding
system on the buckles, rear cuff, and
bootsole: Orange, Purple, Blue, and
Green.Color coded system coordinates with Elan and Tryolia SymPro
rental binding systems.
Extra wide opening, mid-entry
construction goes on fast and is easy
to close. Extra long, 140 mm ratchet
buckles on the cuff comfortably
accommodate legs of all sizes and
shapes. Extra long buckle levers on
cuff make buckle closure and opening
easy.
26
page
The best fit and warmest innerboots for rental featuring fast drying
WATERPROOF constructions and
anti-bacterial SANITIZED® lining
treatments.
RENTAL
Like unconventional rental skiboots, the Vantage is manufactured in 21 different sizes. Unique, however, is the 4 Factor System Technology. ONLY 4 BOOTSOLE LENGHTS are used for the entire series
of boots. The foot is centered on all bootsoles. And, althogh there are only 4 bootsole lenght intervals
for all sizes, the boots are perfectly balanced, both visually and functionally. Rental business is all
about providing fast and efficient service to your customers who are waiting to go skiing. The advantage to using Vantage/ 4 Factor System boots in rental operations is that fewer bootsole lenghts means
fewer binding adjustments need to be made. The result: rental shops work faster and more efficiency
with fewer adjustment errors. The average rental shop can service more customers in less time with
fewer employees.
Vantage/ 4 Factor System boots are available in Gunmetal Grey or Black/ white. 4 Factor Bootsole
lenghts are easily identifiable using a color coding i.d. system on the buckles, boot collars and boot
soles: Orange, Purple, Blue and Green. Boot sizes and sole lenghts (mm)are clearly marked with LARGE, highly visible, color coded graphics located on the cuff rear. In addition, the boots feature binding
adjustment letter graphics that coordinate with the adjustment coding system udes on Elan ESP and
Tyrolia Sympro rental system bindings.
320 mm
290 mm
320 mm
370 mm
38%
45%
11%
6%
100%
370 mm
Orange
Purple
Blue
Green
370 mm
290 mm
320 mm
350 mm
370 mm
% by sole lenght
350 mm
230 - 255=
260 - 285=
290 - 315=
325 - 345=
Unisex size Curve
Code
290 mm
Color
Bootsole lenght
350 mm
4 Factor System
290 mm
Boot size
350 mm
Vantage
320 mm
EXAMPLE OF VANTAGE/ 4 FACTOR RENTAL SHOP FLEET INVENTORY
VANTAGE/ 4 FACTOR BOOTS BY SIZE
Vantage 4 Factor Boots are available in men’s and women’s sizes. The table below illustrates a typical rental shop size curve for 100 pair men’s %
100 pair women’s boots based upon a statistical analysis of factory orders from 2006/07. This table is for illustration purposes only. Specific rental
shop boot sizing needs may be differnt and may vary by geographic region.
MEN’S SIZING CURVE
ORANGE
PURPLE
BLUE
GREEN
250/255 260/265 270/275 280/285 290/295 300/305 310/315
8
16
20
19
13
8
4
325
335
345
TOTAL
3
4
4
100
WOMEN’S SIZING CURVE
ORANGE
PURPLE
230/235 240/245 250/255 260/265 270/275
13
30
26
27
page
24
7
TOTAL
100
2007/2008 D ALBEL LO
RAMPAGE
KRYPTON LOTUS
KRYPTON
SERIES
PROTON 14 ID
RENTAL
SERIES
JUNIOR
SERIES
AERRO - ASPIRE
SERIES
REFLEX - RAYA
SERIES
PROTON - ELECTRA
SERIES
RAVE
KRYPTON PRO ID
KRYPTON PRO
24 -29.5 22 -26.5 N/A
98
N/A
103
25 -30.5 N/A
KRYPTON KRYZMA ID
22 -29.5 22-26.5 N/A
KRYPTON KRYZMA
KRYPTON CROSS ID KRYPTON STORM ID 24 -29.5 22-26.5 N/A
KRYPTON STORM
KRYPTON CROSS
24 -29.5
PROTON 12
*
D-65
80-110 75-100 D-62
24 -29.5
N/A
N/A
N/A
VARIO
98
90-120 75-105 D-65
101
130
N/A
N/A
101
120
N/A
*
D-62 ct ed
Bi-Inje
D-65
D-62 cted
Bi-Inje
nje
D-65
24 -29.5 23-27.5 N/A
103
100
95
D-62 I nje
D-62 cted
Bi-
PROTON 8
ELECTRA 8
24 -29.5 23-27.5 N/A
103
90
85
D-59 D-59
Bi-Inje
nje cted
N/A
103
100-115 N/A
N/A
FORWARD LEAN CONTROL
��
��
��
��
��
D-62
��
REFLEX 9
RAYA 9
25 -30.5 23- 27.5
N/A
103
80-100 75-95
REFLEX 7
RAYA 7
25 -30.5 23- 27.5
N/A
103
75-95 65-85
X
��
REFLEX 5
RAYA 5
25 -30.5 22- 27.5
N/A
103
75-95 65-85
X
��
AERRO 90
ASPIRE 90
25 -31.5 22- 27.5
N/A
105
70-90 65-85
D-62
Bi-Inje
nje
ctt ed
��
AERRO 80
ASPIRE 80
25 -31.5 22- 27.5 N/A
105
65-85 60-80
X
Bi-Inje
nje ctt ed
��
AERRO 70
ASPIRE 70
25 -31.5 22- 27.5
N/A
105
60-80 55-75
X
Bi-Inje
nje ctt ed
��
AERRO 60
ASPIRE 60
25 -31.5 22- 27.5
N/A
105
50-70 45-65
Bi-Inje
nje ctt ed
X
AERRO 50
ASPIRE 50
25 -31.5 22- 27.5
N/A
105
50
98
70-100
D-59
45
HEAVY DUTY REPLACEMENT HEELS
A.S.P. ADJUSTABLE SPOILER PROIFILE
ADJUSTABLE CUFF SPOILER
"LANDING GEAR"SHOCK ABSORBING FOOTBOARD
HIGH VOLUME CUFF GEOMETRY
"POWERSOLE" HIGH PERFORMANCE FOOTBOARD
LOW CUFF HINGE POINT
X-MODULE CUFF VOLUME EXPANSION INSERT
QUICK CHANGE MODULAR ASSEMBLY - 100% DISASSEMBLABLE
DYNALINK HEEL RETENTION SYSTEM
SPORT PROFILE CUFF DESIGN
ACTIFLEXOR - ENERGY BOOSTER
KINETIC RESPONSE TONGUE - "RIDE" D-59 P.A.
CARBON REINFORCED SPOILER
SOFT PANEL EASY ENTRY SYSTEM
KINETIC RESPONSE TONGUE - "RACE" D-65 P.A.
HYPER BAND WIDE PROFILE CUFF CLOSURE
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
D-65
ELECTRA 10
25 -30.5
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
PROTON 10
REFLEX 11
REAR ENTRY DESIGN
� � � � � � � � � � � � � � � � � � � � ��
X
100-140 80-120 D-65
TECHNOLOGY/FEATURES
��
D-65
N/A
98
CO-MOLDED Bi-INJECTION CONSTRUCTION
N/A
HYBRID DESIGN - CENTRAL ENTRY OVERLAP SHELLFIT
VARIO
POLYTEC LITE
98
H.E.M. POLYETHER TRANSPARENT
FLEX INDEX (WOMEN’S)
N/A
(1)
FLEX INDEX (MEN’S)
24 -29.5 N/A
POLYURETHANE
LAST WIDTH (MM)
IL MORO
JUNIOR SIZES
FIT FOR
WOMEN
MEN'S / UNISEX SIZES
MENS / UNISEX / JUNIOR
WOMEN'S SIZES
(2)
SPECIAL FEATURES
CONSTRUCTION
CLASSIC DESIGN - TWO PIECE OVERLAP SHELLFIT
MATERIAL
CABRIO DESIGN - THREE PIECE OVERLAPSHELLFIT
DETAILS
D-59
Bi-Inje
nje ctt ed
X
��
��
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
KRYPTON JAKK
N/A
N/A
22-27.5
P6 COMP
N/A
N/A
19-26.5
50/60
D-59 D-52
BiInje ct ed
P4/MENACE/ELLE
N/A
N/A
19-26.5
30/40
X
Bi-Inje
nje ctt ed
CX 3
N/A
N/A
23.0-26.5
30
X
��
CX 2
N/A
N/A
19.5-22.5
25/30
X
��
CX 1
N/A
N/A
14.5-18.5
20
X
��
SX 1.7
N/A
N/A
14.5-25.5
20
X
��
� � � � � � � � � � � ��
� � � � � � � � � � � ��
VANTAGE
25-34.5 23-27.5
N/A
D-59
��
MX SUPER
25-33 22-27.5
N/A
D-59
��
DX SUPER
25-32 22-27.5
N/A
D-59
��
RX 3.8
25-31
22-27
CXR 3
N/A
N/A
23-26.5
D-59
��
��
CXR 2
N/A
N/A
19.5-22.5
D-59
��
CXR 1
N/A
N/A
14.5-18.5
D-59
��
D-59
RX 1.8
D-59
N/A
N/A
14.5-25.5
N/A
N/A
14.5-25.5
��
28
page
TECHNICAL SPECIFICATIONS
FIT FOR WOMEN TECHNOLOGY
��
3 ��
��
3 ��




4


��
4 ��
��
��
4
��
4 ��
��
��
4
*
��
��
��
��
*
*
��
��
��
4 ��
��
��
4
��
��
4
��
2 2 ��
��
��
2 2
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �3
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
� � � � � � � � � � � � � � � � � � � � � � � � � � � � �4� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
� � � � � � � � � � � � � � � 4� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
� � � � � � � � � � � � �3� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
� � � � � � � � � � � � �2� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
� � � � � � � � � � � � �1� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
� � � ��
1
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
29
�
�
�
�
�
�
�
�
�
1
�
�
�
��
�
1
�
�
�
2
�
�
�
�
3
��
�
��
1
��
�
�
�
�
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
page
DALBELLO reserves the right to change specifications without notice in order to improve the product.
� � �� 4� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
Krypton Rampage MS is Polyurethane D-65 , Krypton Lotus LS is Polyurethane D-62
Krypton Cross MS Steel Grey is Polyurethane D-65, Krypton Cross MS Red is Polyether D-65 (Transparent) , Krypton Storm LS is Polyether D-65 (Transparent)
International Models Reflex 9/7/5 for Men and Raya 9/7 for Women feature 4 Buckle Closure. USA Raya Models 9/7 feature 3 Buckle Closure. All Raya 5 LS feature 3 Buckle Closure
Heat System Ready Design: Select TRUFIT innerboot constructions require no modification to install Heat System Insoles.
All ID Thermo Custom Fit Innerboots feature Aegis Microbe Shield Anti-Microbial Treatment, and are Waterproof
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �3� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��
FOOTNOTES:
��
2 1
(1)
(2)
(3)
(4)
(5)
MODULAR HEEL CUP
HEEL LIFT (INSERT)
MICROFLEECE INNERBOOT TEXTILES
PLUSHLINER “FAUX FUR” INNERBOOT TEXTILES
LOW ANATOMIC PROFILE SHELL CUFF/SPOILER
CUFF VOLUME CIRCUMFERENCE EXPANSION
ADDITIONAL CUSHIONING
LOW ANATOMIC PROFILE INNERBOOT CUFF
ADDITIONAL INSULATION
TAPERED REARFOOT FIT
REDUCED VOLUME LAST
FLEX ADJUSTED FOR WOMEN SKIERS
SOFTER DURMOETER PLASTIC IN CUFF
WATERPROOF LINING
SANATIZED ® ANTI-BACTERIAL LINING
(5)
FIT FOR
WOMEN
HEAT SYSTEM READY DESIGN (4)
HIGH DENSITY / REDUCED VOLUME PERFORMANCE FIT
TRUFIT "SPORT" CUSTOM FIT SYSTEM
SUPER COMFORT FIT SYSTEM
TRUFIT “TEAM PRO” CUSTOM FIT INNERBOOT
TRUFIT "PERFORMER" CUSTOM FIT SYSTEM
TRUFIT “COMP” CUSTOM FIT INNERBOOT
I.D. THERMO “SILVER” TOTAL CUSTOM FIT LINER
I.D. THERMO “SILVER” LADY TOTAL CUSTOM FIT LINER
I.D. THERMO “GOLD” TOTAL CUSTOM FIT LINER
TOP CUFF RATCHET BUCKLE CLOSURE
INNERBOOTS/FIT SYSTEMS
MACRO BUCKLE EXTENSION FEATURE
MACRO ADJUSTABLE BUCKLES
MICRO ADJUSTABLE BUCKLES (3)
RATCHET BUCKLES - POLYCARBONATE
AXXO POLYCARBONATE BUCKLES
GTR POLYCARBONATE BUCKLES
F-70 ALLOY MIX BUCKLES
F-60 POLYCARBONATE BUCKLES (WIDE PROFILE)
F-80 ALUMINUM BUCKLES
F-90 ALUMINUM BUCKLES
SLAP RATCHET CUFF BUCKLE
F-100 ALUMINIUM BUCKLES / F5J JUNIOR ALU
BUCKLES/CLOSURE SYSTEMS
RAMP ANGLE INCLINATOR (HEEL LIFT)
CANTING
TWIN AXIS CANTING (SHAFT ALIGNMENT)
FLEX CONTROL
WALK/SKI MECHANISM
MECHANISMS
FLEX INDEX TABLE
Over the past several years, our industry has attempted to standardize the system of flex indexing ski boots. Currently, however, no uniform system of flex measurement protocols has been adopted as “the standard” for all the different ski boot manufacturers. Flex index numbers within
a specific manufacturer’s collection are relative to other boots in that manufacturer’s line, but have similar, but no precise direct comparison
value to boots made by other manufacturers, even when they appear to use the same scale. The commonly used system of Flex Index values
has recently become more indicative of ski boot performance and price positioning combined with the dynamic characteristics of boot flex.
MEN’S
SOFT
WOMEN’S
HARD
Freestyle
80
Pro / Pro ID
Cross / Cross ID
100
90
100
85
80
75
120
105
Krypton
Proton
Kryzma/ Kryzma ID
Storm/Storm ID
130
120
p14 Carbon ID
p12 Carbon
p10
p8
Electra
130
120
100
90
Reflex
Reflex 11
Reflex 9
Reflex 7
Reflex 5
100
80
75
75
115
100
95
95
Aerro 90
Aerro 80
Aerro 70
Aerro 60
Aerro 50
70
65
60
50
90
85
80
70
50
Aerro
U.S. KIDS
75
65
Lotus (KR)
R5 (RY)
110
Krypton
EURO
HARD
Freestyle
Il Moro (KR)
Rampage (KR)
Rave (RX)
MONDO
SOFT
e10
e8
JUNIOR
Raya
75
65
65
95
85
85
Aspire 90
Aspire 80
Aspire 70
Aspire 60
Aspire 50
65
60
55
45
85
80
75
65
45
Aspire
HARD
70
100
50
60
30
40
30
40
30
40
30
25
20
20
Jakk (KR)
19.0-21.5
p6
22.0-26.5
p6
19.0-21.5
p4
22.0-26.5
p4
Menace 19.0-21.5
Menace 22.0-26.5
19.0-21.5
Elle
Elle
22.0-26.5
CX 3
CX 2
CX 1
SX 1.7
95
85
Raya 9
Raya 7
Raya 5
SOFT
USING FLEX INDEX TABLE
Recreational
< 60
Intermediate
60 - 75
Advanced
75 - 100
Expert/Pro
100 +
*
* Adult Skiers
14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 20.5 21.0 21.5 22.0 22.5 23.0 23.5 24.0 24.5 25.0 25.5 26.0 26.5
24
25
26
1
6
7
62
7
27
1
2
28
1
8
82
29
9
30
10
11
31
32
1
12 2
12
33
13
1
34
35
2
3
4
36
4
1
2
37
1
52
5
38
39
1
6
7
62
40
1
72
41
1
8
82
ENGLISH
3
32
1
4
4
1
2
5
52
1
6
62
1
7
72
1
8
82
1
9
92
10
10 2
1
11
11 2
1
12
12 2
1
13
13 2
U.S. MEN
4
4 12
5
5
1
2
6
62
1
7
72
1
8
82
1
9
92
1
10
10 12
11
11 2
1
12
12 2
1
13
13 2
1
14
14 2
U.S. WOMEN
42
5
52
6 12
7
72
8
82
9
92
EURO
34
MONDO
22.0
1
35
22.5
1
6
36
23.0
37
23.5
24.0
38
1
39
1
40
41
1
30
1
1
10
42
24.5 25.0 25.5 26.0 26.5 27.0 27.5
page
1
43
44
28.0 28.5
45
46
47
48
29.0 29.5 30.0 30.5 31.0
49
50
31.5 32.0 33.0
page
31
KRYPTON SERIES
BOOTSOLE LENGTH (mm)
BOOT SIZES
JUNIOR SX SERIES/RX 1.8
BOOT SIZES
JUNIOR CX SERIES/RENTAL CXR
BOOT SIZES
P6/ P 4 SPORT/ MENACE/ ELLE
BOOT SIZES
RX 3.8 RENTAL
BOOT SIZES
16/16.5
204
194
16.5/17.5
212
206
224
14.5/16.0
214
18/18.5
270
17/17.5
23.5/24
280
24/24.5
262
268
290
25/25.5
224
18/18.5
234
234
19/20
241
20/20.5
249
239
19/19.5
20/20.5
290
25.5/26
297
26/26.5
320
27/27.5
299
25/25.5
297
25/25.5
298
25/25.5
296
25/25.5
19/19.5
280
24.5/25
286
25/25.5
320
26/26.5
289
22.5/23
23/23.5
260
290
22/22.5
24/24.5
290
24/24.5
287
24/24.5
279
277
267
23/23.5
23/23.5
22/22.5
288
278
286
24/24.5
24/24.5
276
266
23/23.5
23/23.5
22/22.5
23/23.5
14.5/15.5
RENTAL MX SUPER/DX SUPER & DX MODELS
BOOT SIZES
RENTAL VANTAGE MODELS
BOOT SIZES
AERRO & ASPIRE SERIES (MODELS 90/80/70/60/50)
BOOT SIZES
REFLEX & RAYA SERIES
BOOT SIZES
PROTON & ELECTRA SERIES
BOOT SIZES
251
20.5/21.5
250
21/21.5
259
21/21.5
302
26.5/27
305
27/27.5
320
28/28.5
308
26/26.5
307
26/26.5
308
26/26.5
306
26/26.5
265
22/22.5
262
22/22.5
269
22/22.5
310
27.5/28
315
28/28.5
350
29/29.5
318
27/27.5
317
27/27.5
318
27/27.5
316
27/27.5
273
23/23.5
267
23/23.5
279
23/23.5
320
28.5/29
324
29/29.5
350
30/30.5
328
28/28.5
327
28/28.5
328
28/28.5
326
28/28.5
280
24/24.5
277
24/24.5
289
24/24.5
330
29.5/30
334
30/30.5
350
31.0/32.0
339
29/29.5
337
29/29.5
338
29/29.5
336
29/29.5
289
25/25.5
287
25/25.5
300
25/25.5
340
30.5/31
347
31.0/32.0
370
33.0/33.5
349
30/30.5
347
30/30.5
297
26/26.5
310
26/26.5
356
33.0
370
34.0
359
31/31.5
2007/2008 SKI BOOT SOLE LENGTHS
www.dalbello.it (international)
www.dalbellosports.com (usa)
Calzaturificio Dal Bello s.r.l.
Via Frattalunga 12
31010 Casella D’Asolo (TV) Italy
Tel: +39 0423 55641 Fax: +39 0423 529301
e-mail: [email protected]
page

2007/2008 Sales and Technical Support Manual - Contacts

Transcription

Similar documents

Deblocking Lenses Has Never Been So Easy!

no additional fuel or currency

User`s Manual

Gregor Maehle Poster

2003/2004 Sales and Technical Support Manual

Installing And Configuring Windows Deployment

Application of the Passy-Muir Tracheostomy and Ventilator

sliding scale

06-07 high performance rental skis

The Chalet Included services Chamois apartment 1 3 S S S 2 3