4X4 OFF ROAD Brochure
Transcription
4X4 OFF ROAD Brochure
Self Sealing Fittings Other Revotec Products An engineered solution to fitting an inlet/outlet into virtually any hose. This unique design forms a perfect seal and will even work on semi rigid plastic or metal. CNC machined in aluminium or stainless steel (where applicable). Supplied complete with seal and hole cutter. Available as either push on tail or threaded fitting Hose Joiners, Adapters & Take offs Hose Adapters CNC machined in aluminium for a number of different applications including water and air to allow the neat and simple installation of sensors and Hose Adaptor Take-offs into silicone or rubber hose. Outside diameters: 25, 28, 30, 32, 35, 38 & 45mm. Available with: M10, M12, M14, 1/8NPT, 5/8UNF & 3/8BSP thread. Hose Adapter Take Offs Engineered T-Connection solution for fitment to a Revotec Hose Adapter with a 3/8BSP thread. CNC billet machined aluminium. Ribbed for maximum sealing and grip. Supplied complete with a special sealing washer. 6 sizes available: 8, 10, 13, 16, 19 & 25mm. Hose Joiners CNC Produced, ribbed for maximum sealing and grip. 23 sizes available: 13, 16, 19, 22, 25, 28, 30, 32, 35, 38, 40, 45, 48, 50, 54, 57, 60, 63, 68, 70, 75, 80, 89mm OD. Flexible Brake Ducting/Air Intake Hose Black - single layer specially formulated neoprene. Operating temperature: -50°C +150°C. Red/Brown - single layer of silicone impregnated fabric. Operating temperature: -80°C +310°C. Aluminium Reducers A range of aluminium reducers for connecting air systems including ducting, filters and intercoolers. Suitable for welding, or can be used as they are. Each reducer has a wall thickness of approx 1.3mm and measures 80mm in length. Automotive Cooling Specialist Aluminium Air Inlets Spun Aluminium Inlets supplied with a pre-cut self adhesive pad. Die cut gauze inserts available separately. 5 sizes available: 51, 63, 76, 89 & 102mm in natural silver or anodised black. Air Outlets Simplify the installation of brake/intake ducting. Simply rivet to brake back plate, air boxes, bulkheads etc.Slip ducting over the outlet and secure with a clamp. Air Intake Ducts A range of Intake Ducts, NACA Ducts & Side Air scoops manufactured in black high density polyethylene. Engineered for maximum air flow. Joining Sleeves An engineered solution to the problem of joining intake hose to ducts. The Revotec heat shrink sleeves are adhesive lined producing a strong, neat, light and water/vibration proof joint. www.revotec.com 4X4 OFF ROAD Brochure www.revotec.com COMEX Cooling Fans Light weight, slim-line body Low noise Finger guard Multiple mounting options Balanced blades High output long-life design Rated to run continuously Waterproofed to IP68 Available as dedicated suckers or blowers, in 12 & 24 volt and as slim-line or high power applications. Sizes from 6.6” (167mm) to 15.2” (385mm) COMEX axial fans have been developed to deliver high performance and long life. Each motor is fitted with bearings and is water/dust proof (to IP68) making them ideal for working in Extreme conditions found in the 4x4 environment. FREE Fan Fitting Template Revotec are pleased to offer you a FREE Fan Fitting Template available at Revotec.com! Simply using a pair of scissors cut around the desired size and hold to your radiator for an accurate fitting guide. Air Conditioning Fans Reduced weight Reduced consumptions Reduced noise Very high mechanical resistance Balanced blades Very high temperature resistance Waterproofed to IP68 COMEX Air Conditioning Fans are an ideal replacement to the current fan on your 4x4. Either using standard fans with an identical foot print or engineered mounting brackets. Direct replacement kits currently available for the Land Rover Defender: 11” fan and Land Rover Discovery: 12” fan. Electronic Fan Controllers Land Rover Cooling Kits The professional solution to controlling retro-fit electronic fans The latest fan and controller technology used together for the ultimate cooling package Instant response No interruptions of radiator hose seals or damage to spout Simply installed in a radiator hose with no leaks! Fitted in minutes Variable temperature control range of 70°C - 120°C Incredibly easy to install, operate and overcomes all the problems associated with capillary action and clip on devices. Each system is supplied with all necessary fittings. Suitable for use with all electronic fans and is available in a range of fittings to suit most applications. Switch & Fan Fittings Override & Wading Switch Developed specifically for 4x4 applications such as wading. 3 Way rotary switch for use with a Revotec Fan Controller enabling the fan to be manually controlled either On, Off or Automatic. Supplied complete with: Black anodised mounting bracket Kit, Position decal, Sealed wiring loom and connection diagram. Universal Aluminium Brackets The Revotec universal aluminium brackets are designed to aid the installation of a cooling fan to your vehicle. These make installation simple for anyone wishing to upgrade to a COMEX cooling fan. Fan Pull Through Kit Used for mounting a cooling fan directly to the cores of a radiator. This simple flexible universal installation kit allows the simple fitting for any make or model of cooling fan. Defender/Discovery TDi Defender/Discovery TD5/TDCi Model Specific Engineered Brackets A Revotec Variable Temperature Land Rover Fan Controller A COMEX Bearinged, Balanced, Long Life & Waterproof Fan Supplied complete with all neccesary fittings and fixings to complete an electronic fan conversion on your Land Rover. Each Kit Contains: A Revotec Variable Temperature Land Rover controller. Variable from 70-120°C, with an instant response. A High Power COMEX Fan which is: Waterproof to IP68, Bearinged, Balanced and rated to operate 24hours. A set of Laser cut aluminium brackets and all necessary fittings for a professional installation. Upgrading to an electronic fan and removing the viscous/fixed fan increases fuel economy and performance, reduces engine warm up time and ensures sufficient engine cooling and protection in modern traffic conditions, with the additional benefit of a more effective heater. The electric fan can also be switched off before entering water (switch not included). Bespoke Cooling Kits available at present for the following Land Rovers Defender TDi TD5 TDCi Discovery TDi TD5 Revotec Ltd, Unit A, The Croft, Hithercroft Industrial Estate, Wallingford, Oxfordshire, OX10 9RG Tel: 0044 (0) 1491 824424 Fax: 0044 (0) 1491 833711 Email: [email protected] www.revotec.com