Di5
Transcription
Di5
Di5 Product Description Designed for a wide variety of sound reinforcement applications, the Tannoy Di5 is a high performance, ultra compact surface mount weather resistant loudspeaker. A full bandwidth loudspeaker designed for commercial, professional and residential applications where environment durability and high quality sonic performance are required. Indoor or outdoor, these speakers are ideally suited to stereo or monaural background or foreground music systems in such applications as diverse as theme parks, retail premises, restaurants and cafés, corporate audio visual, residential developments and houses of worship. Equipped with Tannoy’s unique and exclusive point source ICT™ 110mm (4.50") drive unit, the Di5 delivers an acoustic performance of outstanding clarity, definition and detail. The point source configuration of the Tannoy ICT™ driver’s mid-bass and tweeter sections ensures a wide and controlled dispersion for optimum coverage; this while avoiding the massive loss of energy in the vertical plane, at the crossover frequency, inherent in two-way discrete designs. The ICT™ (Inductive Coupling Technology) drive unit also addresses the two most common component failures experienced in background music and sound reinforcement systems, the tweeter and the crossover reliability. The use of a wireless electromagnetic tweeter means that no crossover is required in the design; this therefore ensures that an ICT™ unit is exceptionally reliable and therefore ideal for applications where constant heavy usage is the norm. This aluminium high frequency dome has a deep drawn skirt that sits on the inside of the low frequency voice coil in the same magnetic gap. The skirt is like a single shorted turn that is induced with high frequency information generated by the low frequency voice coil, which is fed a full bandwidth signal. The mineral loaded polypropylene cone material and nitrile rubber surround further enhance durability and long-term reliability. Available in textured black or white painted finish with matching rubber trims, the outstandingly durable and scuff resistant, high impact polystyrene (HIPS) Di enclosure is weather resistant,rated IP64 to EN60529 (IEC529); a construction fully optimised for consistent performance in adverse conditions indoors or out. Modification is possible by application of alternative colour trims. Two standard colour trim options are available from stock; enabling black or white product to be supplied factory pre-fitted with either red or blue trims. Other trim colours can also be created to suit specific requirements, but only as a special order customisation subject to minimum order quantities. Primarily aimed at corporate branding applications, this aesthetic flexibility will also enable colour coordination for larger installs. Transformer version - the Di5t The Di5t model option is equipped with an internally mounted low insertion loss line transformer for 70V or 100V distributed sound applications. Wattage taps are easily configurable to the following settings via an easily accessible rotary tapping switch, which is top panel mounted under the rubber trim. 70V: 30W / 15W / 7.5W / 3.75W / OFF & Low Impedance operation 100V: 30W / 15W / 7.5W / OFF & Low Impedance operation Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 Features • 110mm (4.50”) ICT™ transducer for high performance and durability • 90 degree controlled conical dispersion for optimum coverage and forward gain • Weather resistant rated IP64 to EN60529 (IEC529) • High power handling and extended bandwith • Phase coherent design for superior vocal articulation and music reproduction • No crossover required, ensuring better phase, impedance and sensitivity response and increased durability • Yoke bracket supplied, optional accessories include pole mount adaptor and the unique K-Ball™ pre-wired, fully adjustable multi-angle bracket • Five year loudspeaker warranty Transformer version - the Di5t • Low insertion loss 30W transformer for an more powerful and dynamic performance in distributed audio installations • Top mounted switch for line voltage settings Applications • Indoor or outdoor commercial, professional and residential installations • High level stereo or monaural background or foreground music and speech paging systems • Theme parks • Theme bars • Reception / waiting rooms • Airports, convention centres and hotels • Business music systems • Boardrooms and offices • Cruise ships • Retail outlets and shopping malls • Restaurants and cafes • Corporate audio visual • Residential developemnts • Houses of worship E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 TECHNICAL SPECIFICATIONS System Frequency Response (-3dB) (1) Frequency Range (-10dB) (1) Di5 / Di5t Construction Enclosure 90Hz - 25kHz 80Hz - 30kHz System Sensitivity (1W @1m) (2) 88dB (1W = 2.45V for 6 Ohms) Dispersion (-6dB) 90 degrees conical High Frequency 1 x 110mm (4.50”) Mineral loaded polypropylene 25mm (1.00”) ICT™ Directivity Factor (Q) 5.3 averaged 1kHz to 10kHz Driver Complement Low Frequency Crossover 7kHz Inductively coupled Directivity Index (DI) Rated Maximum SPL (2) Average Peak Power Handling Average Programme Peak 6.6 averaged 1kHz to 10kHz 105dB 111dB Distortion 10% Full Power (5.5V) 250Hz 1kHz 10kHz 8001 4010 8001 4011 8001 4020 8001 4021 Di5 Di5 Di5t Di5t Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France Yoke bracket Pole mount adaptor K-Ball™ pre-wired multi angle bracket 240.7 x 155 x 162mm (H x W x D) (9.47 x 6.1 x 6.38”) (H x W x D) Full independent verification of published specifications carried out by NWAA Labs, California can also be obtained from the downloads section of www.tannoy.com Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications. 3rd Harmonic 0.26% 0.19% 0.35% 3rd Harmonic 0.09% 0.11% 0.298% COLOUR Black White Black White T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 2.7kg (5.94lbs) Notes: (1) Average over stated bandwidth. Measured at 1 metre on axis. (2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber Ordering Information MODEL NAME Optional Accessories 1 x K-Ball™ bracket socket 2 x M8 yoke bracket inserts A full range of measurements, performance data, CLF and Ease™ Data can be downloaded from www.tannoy.com 2nd Harmonic 0.65% 0.144% 0.52% PART NUMBER Supplied Accessories Euroblock type removable locking connector with screw terminals with "loop through" facility 6 Ohms 2nd Harmonic 2.00% 0.53% 2.5% 1% Full Power (1.73V) 250Hz 1kHz 10kHz Fittings Textured black or white paint (custom trim colours can be supplied pre-fitted to special order - minimum order quantity applies) NET Weight 30W / 15W / 7.5W / 3.75W / OFF & low impedance operation 30W / 15W / 7.5W / OFF & low impedance operation 100V Connectors Steel, with weather resistant coating 50W 100W 200W Di5t - Transformer Taps (top rotary switch) 70V Finish Dimensions Recommended Amplifier Power 100W @ 6 Ohms Nominal Impedance Grille High Impact Polystyrene (HIPS) rated IP64 to EN60529 (IEC529) PACKED QUANTITY 2 2 2 2 PACKED WEIGHT 3.0 (6.61lb) 3.0 (6.61lb) 3.5kg (7.72lbs) 3.5kg (7.72lbs) E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 PERFORMANCE MEASUREMENTS 1m on-axis frequency response 100 SPL, 1W/1m (dB) 90 80 70 60 50 ANECHOIC FREQUENCY RESPONSE 10 100 1000 10000 frequency (Hz) 100000 1m on-axis frequency response 14 12 Impedance (ohms) 10 8 6 4 2 0 10 100 IMPEDANCE frequency (Hz) 1000 10000 HorizontalOff-Axis off-axis Responses response Horizontal 100 90 Level (dB) 80 0 deg 10 deg 20deg 30deg 40deg 70 60 OFF AXIS RESPONSE Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France 50 10 T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 100 1000 frequency (Hz) 10000 100000 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 PERFORMANCE MEASUREMENTS Beamwidth vs Frequency 360 330 300 270 Degrees g 240 210 180 150 120 90 60 30 0 100 1000 frequency (Hz) BEAMWIDTH DI vs Frequency 100 Q Q 10 1 100 1000 F frequency (Hz)( H ) DIRECTIVITY INDEX Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France 10000 T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 10000 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100 Hz 125 Hz 160 Hz 200 Hz 0 330 30 0 330 -12 300 60 300 -36 90 -48 1 0 30 0 270 630 Hz 800 Hz 1 kHz 1.25 kHz 330 60 300 90 1 0 0 270 4 kHz 5 kHz 6.3 kHz 8 kHz 30 330 1 0 10 kHz 12.5 kHz 16 kHz 20 kHz 30 -12 60 -24 300 -24 60 -36 90 -48 270 1 T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 90 0 -36 Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France 60 -48 -12 270 1.6 kHz 2 kHz 2.5 kHz 3.15 kHz -36 -48 300 30 0 -24 -36 330 1 0 -12 -24 270 90 -48 -12 300 60 -24 -36 330 30 0 -12 -24 270 250 Hz 315 Hz 400 Hz 500 Hz 0 90 -48 1 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100Hz 125Hz 160Hz 200Hz 0 330 30 0 330 -12 300 60 300 -36 90 -48 30 0 270 330 60 300 -36 90 -48 1 0 0 30 270 4kHz 5kHz 6.3kHz 8kHz 330 0 30 10 kHz 12.5 kHz 16 kHz 20 kHz -12 300 60 -24 -24 60 -36 90 -48 270 1 T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 1 0 -36 Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France 90 -48 -12 270 60 -24 -36 300 30 0 -12 -24 330 1.6kHz 1.6 kHz 2kHz 2 kHz 2.5kHz 2.5 kHz 3.15kHz 3.15 kHz 0 -12 270 90 -48 630Hz 630 Hz 800Hz 800 Hz 1kHz 1 kHz 1.25kHz 1.25 kHz 0 300 60 -24 -36 330 30 0 -12 -24 270 250Hz 315Hz 400Hz 500Hz 0 90 -48 1 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 DIMENSIONAL SKETCHES R165.0mm (R6.50”) 7° 102.0mm (4.02”) 162.0mm (6.38”) R300.0mm (R11.81”) 155.0mm (6.10”) 240.7mm (9.47”) 130.4mm (5.13”) SUPPLIED MOUNTING BRACKET Di5 Yoke 241.0 241.0mm [9.49"] (9.49”) R15.0mm [R0.59"] (0.59”) R15.0 123.0mm 123.0 (4.84”) [4.84"] 54.0 54.0mm [2.13"] (2.13”) 85.0mm [3.35"] 3.35” 90.0mm [3.54"] 3.54” 90.0 85.0 6.0 6.0mm [0.24"] (0.24”) Ø22.0mm ø (Ø0.87”) 35.0 35.0mm [1.38"] 1.38” Di5 YOKE Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 OPTIONAL ACCESSORIES K-Ball™ Bracket 47.7 47.7mm (1.88”) [1.88"] 93.2 93.0mm (3.67”) [3.67"] 137.9mm 137.9 (5.43”) 155.0mm 155.0 (6.10”) [6.10"] [5.43"] 65.0mm 65.0 (2.56”) [2.56"] Pole Mount Adapter 240.0 240.0mm [9.45"] (9.45”) Ø22.0 Ø22.0mm [Ø0.87"] (Ø0.87”) 70.0 Ø70.0mm (Ø2.76”) [2.76"] Pole Mount Adapter with Yoke bracket Ø7.0 Ø7.0mm [Ø0.28"] (Ø0.28”) 40.0 40.0mm [1.57"] (1.57”) Ø152.4mm Ø152.4 (Ø6.00”) [Ø6.00"] Ø228.6 Ø226.6mm [Ø9.00"] (Ø9.00”) Ø76.2mm Ø76.2 (Ø3.00”) [Ø3.00"] Ordering Information PART NUMBER 8001 4190 8001 4191 8001 4600 8001 4601 Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France COLOUR MODEL NAME K-Ball™ Bracket K-Ball™ Bracket Pole Mount Adapter Pole Mount Adapter T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 Pole Mount Adapter with K-Ball™ bracket Black White Black White PACKED QUANTITY 1 1 1 1 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 Architectural specifications Di5 The weather resistant, full bandwidth surface mount speaker system shall consist of a 110mm (4.50") full range, point source ICT™ transducer mounted in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure, rated IP64 to EN60529 (IEC529). The protective grille shall be constructed from steel with a weather resistant coating. Performance of the Di5 surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 90 degrees (-6dB). Frequency response measured on axis shall be 80Hz - 30kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at 1 metre in an anechoic chamber) with no equalisation. Sensitivity shall be 88dB (1W = 2.45V for 6 Ohms). Long term power handling capacity as defined in EIA-426B test shall be 50W, recommended amplifier power 100W. The nominal system impedance shall be 6 Ohms (in low impedance setting). A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by a tie back point. The dimensions shall not exceed 240.7 x 155 x 162mm (9.47 x 6.10 x 6.38”). The surface mount speaker system shall be the.....Di5. Architectural specifications Di5t The weather resistant, full bandwidth surface mount speaker system shall consist of a 110mm (4.50") full range, point source ICT™ transducer mounted in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure, rated IP64 to EN60529 (IEC529). The protective grille shall be constructed from steel with a weather resistant coating. Performance of the Di5t surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 90 degrees (-6dB). Frequency response measured on axis shall be 80Hz - 30kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at 1 metre in an anechoic chamber) with no equalisation. Sensitivity shall be 88dB (1W = 2.45V for 6 Ohms). Long term power handling capacity as defined in EIA-426B test shall be 50W, recommended amplifier power 100W. The nominal system impedance shall be 6 Ohms (in low impedance setting). The Di5t speaker system shall be equipped with a 30W high performance line transformer for use in 70.7 or 100 Volt distributed audio systems with 30 / 15 / 7.5 / 3.75* Watt, OFF and Low Impedance taps available. An easily accessible rotary switch located under the rubber trim on the top of the cabinet shall be available for selecting transformer and low impedance settings. A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by a tie back point. The dimensions shall not exceed 240.7 x 155 x 162mm (9.47 x 6.10 x 6.38”). The surface mount speaker system shall be the.....Di5t. *70 Volt only Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 NOTES Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 NOTES Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08 Di5 NOTES Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di5 data file // issue 1.06 // 14.01.08
Similar documents
Tannoy
The weather resistant, full bandwidth surface mount speaker system shall consist of a 200mm (8.00") full range, point source Dual Concentric™ transducer mounted in an optimally tuned vented, inject...
More information