Tannoy
Transcription
Tannoy
Di8 DC Product Description Designed for a wide variety of sound reinforcement applications, the Tannoy Di8 DC is a high performance, ultra compact surface mount weather resistant loudspeaker. A full bandwidth loudspeaker designed for commercial, professional and residential applications where environment durability and high quality sonic performance are required. Indoor or outdoor, these speakers are ideally suited to stereo or monaural background or foreground music systems in such applications as diverse as theme parks, retail premises, restaurants and cafés, corporate audio visual, residential developments and houses of worship. Renowned for its extraordinary power handling, high sensitivity, extended frequency response and very low distortion, Tannoy’s Dual Concentric™ provides a wide and controlled dispersion ensuring optimum coverage. By placing the high frequency drive unit physically inside the low frequency driver, Tannoy engineers have created a true point source that exhibits constant directivity and unparalleled linearity. Perfect for this type of application, the driver system generates a spherical wave front unaffected by energy loss at the crossover frequency in either vertical or horizontal planes; allowing highly flexible speaker placement on the wall or ceiling with no compromise to performance and vocal intelligibility. The Dual Concentric™ driver in the Di8 DC uses a 200mm (8.00") complex multi fibre paper pulp mix for the mid bass cone to achieve optimum acoustic performance, while a comprehensive resin treatment process ensures the materials weather resistance. The concentrically positioned 25mm (1.00") HF unit has a ferrofluid cooled titanium dome, with a neodymium magnet system, equipped with dynamic high frequency protection. Available in textured black or white painted finish with matching rubber trims, the outstandingly durable and scuff resistant, high impact polystyrene (HIPS) Di enclosure is weather resistant, rated IP64 to EN60529 (IEC529); a construction fully optimised for consistent performance in adverse conditions indoors or out. Modification is possible by application of alternative colour trims. Two standard colour trim options are available from stock; enabling black or white product to be supplied factory pre-fitted with either red or blue trims. Other trim colours can also be created to suit specific requirements, but only as a special order customisation subject to minimum order quantities. Primarily aimed at corporate branding applications, this aesthetic flexibility will also enable colour coordination for larger installs. Transformer version - the Di8 DCt The Di8 DCt model option is equipped with an internally mounted low insertion loss line transformer for 70V or 100V distributed sound applications. Wattage taps are easily configurable to the following settings via an easily accessible rotary tapping switch, which is bottom panel mounted under the rubber trim. 70V: 60W / 30W / 15W / 7.5W / OFF & Low impedance operation 100V: 60W / 30W / 15W / OFF & Low impedance operation Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 Features • 200mm (8.00”) Dual Concentric™ transducer for high performance and durability • 90 degree controlled conical dispersion for optimum coverage and forward gain • Weather resistant rated IP64 to EN60529 (IEC529) • High power handling and extended bandwidth • Phase coherent design for superior vocal articulation and music reproduction • Yoke bracket supplied, optional accessories include pole mount adaptor and the unique K-Ball™ pre-wired, fully adjustable multi-angle bracket • Five year loudspeaker warranty Transformer version - the Di8 DCt • Low insertion loss 60W transformer for a more powerful and dynamic performance in distributed audio installations • Bottom mounted switch for line voltage settings Applications • Indoor or outdoor commercial, professional and residential installations • High level stereo or monaural background or foreground music and speech paging systems • Theme parks • Theme bars • Reception / waiting rooms • Airports, convention centres and hotels • Business music systems • Boardrooms and offices • Cruise ships • Retail outlets and shopping malls • Restaurants and cafes • Corporate audio visual • Residential developments • Houses of worship E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC TECHNICAL SPECIFICATIONS System Frequency Response (-3dB) Frequency Range (-10dB) (1) (1) Di8 DC /Di8 DCt Construction Enclosure 65Hz - 30kHz 53Hz - 35kHz Grille System Sensitivity (1W @1m) (2) 91dB (1W = 2.83V for 8 Ohms) Dispersion (-6dB) Driver Complement Low Frequency 1x 200mm (8.00") Dual Concentric constant directivity driver with multi fibre paper pulp cone 25mm (1.00") titanium dome with neodymium magnet system TM High Frequency Crossover Directivity Factor (Q) Rated Maximum SPL (2) Average Peak Power Handling Average Programme Peak 7 averaged 1kHz to 10kHz Dimensions 111dB 117dB NET Weight Nominal Impedance 8 Ohms Distortion 10% Full Power (8.5V) 250Hz 1kHz 10kHz 2nd Harmonic 1.55% 0.41% 1.2% PART NUMBER 8001 4120 8001 4121 8001 4130 8001 4131 Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France 1 x K-Ball™ Bracket Socket, 2 x M8 yoke bracket inserts Yoke bracket Pole mount adaptor, multi angle K-Ball™ pre-wired bracket 404.3 x 260 x 260.3mm (H x W x D) (15.92 x 10.24 x 10.25”)(H x W x D) 7.0kg (15.87lbs) Full independent verification of published specifications carried out by NWAA Labs, California can also be obtained from the downloads section of www.tannoy.com Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications. 3rd Harmonic 0.42% 0.63% 0.65% 3rd Harmonic 0.48% 0.47% 0.13% COLOUR MODEL NAME Di8 DC Di8 DC Di8 DCt Di8 DCt T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 Euroblock type removable locking connector with screw terminals with "loop through" facility A full range of measurements, performance data, CLF and Ease™ Data can be downloaded from www.tannoy.com Di8 DCt - Transformer Taps (bottom rotary switch) 70V 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation 100V 60W / 30W / 15W / OFF & Low Impedance operation 2nd Harmonic 0.43% 0.07% 0.55% Optional Accessories Textured Black or White paint (custom trim colours can be supplied pre-fitted to special order - minimum order quantity applies) Notes: (1) Average over stated bandwidth. Measured at 1 metre on axis. (2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber Recommended Amplifier Power 180W @ 8 Ohms Ordering Information Fittings Supplied Accessories 90W 180W 360W 1% Full Power (2.7V) 250Hz 1kHz 10kHz Connectors 1.5kHz - 2nd order LF, 2nd order HF (with dynamic HF protection) 5.5 averaged 1kHz to 10kHz Directivity Index (DI) Steel, with weather resistant coating Finish 90 degrees conical High Impact Polystyrene (HIPS) rated IP64 to EN60529 (IEC529) Black White Black White PACKED QUANTITY 2 2 2 2 PACKED WEIGHT 8.25kg (18.19lbs) 8.25kg (18.19lbs) 9.50kg (20.94lbs) 9.50kg (20.94lbs) E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC PERFORMANCE MEASUREMENTS 1m on-axis frequency q y response p 100 SPL, 1W/1m (dB) 90 80 70 60 50 ANECHOIC FREQUENCY RESPONSE 10 100 1000 10000 frequency (Hz) F 100000 1m on-axis frequency response 40 Impedance (ohms) 30 20 10 0 10 100 IMPEDANCE frequency (Hz) F 1000 10000 Horizontal Off-Axis Responses 100 90 Level (dB) 80 0 deg 10 deg 20deg 30deg 40deg 70 60 OFF AXIS RESPONSE Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France 50 10 T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 100 1000 F frequency (Hz) 10000 100000 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC PERFORMANCE MEASUREMENTS Beamwidth vs Frequency 360 330 300 270 Degrees Degrees 240 210 180 150 120 90 60 30 0 100 1000 Ffrequency (Hz) BEAMWIDTH DI vs Frequency y 100 Q 10 1 100 1000 F frequency (Hz) DIRECTIVITY INDEX Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France 10000 T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 10000 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100Hz 125Hz 160Hz 200Hz 0 330 30 0 330 -12 300 60 300 -36 -48 90 -48 270 630Hz 630 Hz 800Hz 800 Hz 1kHz 1 kHz 1.25kHz 1.25 kHz 0 30 0 330 60 300 90 1 0 0 -48 270 4kHz 5kHz 6.3kHz 8kHz 90 1 0 30 330 -12 0 10kHz 12.5kHz 16kHz 20kHz 30 -12 60 -24 300 -36 270 60 -36 -48 300 30 0 -24 -36 330 1.6kHz 1.6 kHz 2 2kHz kHz 2.5 2.5kHz kHz 3.15 3.15kHz kHz -12 -24 270 90 0 -12 300 60 -24 -36 330 30 0 -12 -24 270 250 Hz 315 Hz 400 Hz 500 Hz 0 -24 60 -36 -48 90 270 -48 90 1 Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) 100Hz 125Hz 160Hz 200Hz 0 330 30 0 330 -12 300 60 300 -36 -48 90 -48 270 630Hz 630 Hz 800Hz 800 Hz 1kHz 1 kHz 1.25kHz 1.25 kHz 0 30 0 330 60 300 90 1 0 0 -48 270 4kHz 5kHz 6.3kHz 8kHz 90 1 0 30 330 -12 0 10kHz 12.5kHz 16kHz 20kHz 30 -12 60 -24 300 -36 270 60 -36 -48 300 30 0 -24 -36 330 1.6kHz 1.6 kHz 2kHz 2 kHz 2.5kHz 2.5 kHz 3.15kHz 3.15 kHz -12 -24 270 90 0 -12 300 60 -24 -36 330 30 0 -12 -24 270 250Hz 315Hz 400Hz 500Hz 0 -24 60 -36 -48 90 270 -48 90 1 Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC DIMENSIONAL SKETCHES R400.0mm (R15.75”) 8° 191.0mm (7.52”) 260.3mm (10.25”) R550mm (R21.65”) 260.0mm (10.24”) 404.3mm (15.92”) 202.2mm (97.96”) SUPPLIED MOUNTING BRACKET Di8 DCt Yoke 406.0 406.0mm [15.98"] (15.98”) R15.0 R15.0mm [R0.59"] (R0.59”) 217.0mm 217.0 (8.54”) [8.54"] 165.0 165.0mm [6.50"] (6.50”) 170.0 170.0mm [6.69"] (6.69”) 35.0 35.0mm [1.38"] (1.38”) Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 R11.0 R11.0mm [R0.43"] (R0.43”) 70.0 70.0mm [2.76"] (2.76”) 6.0mm 6.0 (0.24”) [0.24"] E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC OPTIONAL ACCESSORIES K-Ball™ Bracket 47.7 47.7mm (1.88”) [1.88"] 93.2 93.0mm (3.67”) [3.67"] 137.9mm 137.9 (5.43”) [5.43"] 155.0mm 155.0 (6.10”) [6.10"] 65.0 65.0mm [2.56"] (2.56”) Pole Mount Adapter 240.0 240.0mm [9.45"] (9.45”) Ø22.0 Ø22.0mm [Ø0.87"] (Ø0.87”) 70.0 Ø70.0mm (Ø2.76”) [2.76"] Pole Mount Adapter with Yoke bracket Ø7.0 Ø7.0mm [Ø0.28"] (Ø0.28”) 40.0 40.0mm [1.57"] (1.57”) Ø152.4mm Ø152.4 (Ø6.00”) [Ø6.00"] Ø228.6 Ø226.6mm [Ø9.00"] (Ø9.00”) Ø76.2mm Ø76.2 (Ø3.00”) [Ø3.00"] Ordering Information PART NUMBER 8001 4190 8001 4191 8001 4600 8001 4601 Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France COLOUR MODEL NAME K-Ball™ Bracket K-Ball™ Bracket Pole Mount Adapter Pole Mount Adapter T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 Pole Mount Adapter with K-Ball™ bracket Black White Black White PACKED QUANTITY 1 1 1 1 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC Architectural specifications Di8 DC The weather resistant, full bandwidth surface mount speaker system shall consist of a 200mm (8.00") full range, point source Dual Concentric™ transducer mounted in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure rated IP64 to EN60529 (IEC529). The protective grille shall be constructed from steel with a weather resistant coating. Performance of the Di8 DC surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 90 degrees (-6dB). Frequency response measured on axis shall be 53Hz - 35kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at 1 metre in an anechoic chamber) with no equalisation. Sensitivity shall be 91dB (1W = 2.83V for 8 Ohms). Long term power handling capacity as defined in EIA-426B test shall be 90W, recommended amplifier power 180W. The nominal system impedance shall be 8 Ohms (in low impedance setting). A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by a tie back point. The dimensions shall not exceed 404.3 x 260 x 260.3mm (15.92 x 10.24 x 10.25”). The surface mount speaker system shall be the.....Di8 DC. Architectural specifications Di8 DCt The weather resistant, full bandwidth surface mount speaker system shall consist of a 200mm (8.00") full range, point source Dual Concentric™ transducer mounted in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure, rated IP64 to EN60529 (IEC529). The protective grille shall be constructed from steel with a weather resistant coating. Performance of the Di8 DCt surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 90 degrees (-6dB). Frequency response measured on axis shall be 53Hz - 35kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at 1 metre in an anechoic chamber) with no equalisation. Sensitivity shall be 91dB (1W = 2.83V for 8 Ohms). Long term power handling capacity as defined in EIA-426B test shall be 90W, recommended amplifier power 180W. The nominal system impedance shall be 8 Ohms (in low impedance setting). The Di8 DCt speaker system shall be equipped with a 60W high performance line transformer for use in 70.7 or 100 Volt distributed audio systems with 60W / 30W / 15W / 7.5W* Watt, OFF and Low Impedance taps available. An easily accessible rotary switch located under the rubber trim on the bottom of the cabinet shall be available for selecting transformer and low impedance settings. A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by a tie back point. The dimensions shall not exceed 404.3 x 260 x 260.3mm (15.92 x 10.24 x 10.25”). The surface mount speaker system shall be the.....Di8 DCt. *70 Volt only Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC NOTES Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC NOTES Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08 Di8 DC NOTES Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473 E: [email protected] E: [email protected] E: [email protected] E: [email protected] Tannoy adopts a policy of continuous improvement and product specification is subject to change Di8 DC data file // issue 1.06 // 15.01.08
Similar documents
Di5
environment durability and high quality sonic performance are required. Indoor or outdoor, these speakers are ideally suited to stereo or monaural background or foreground music systems in such app...
More information