DeStoner DeStoner - Garratt Industries

D eS to ner
For Removal of stones and
debris from edible product
With externally mounted controls, shaker,
fan speed and all major operating
adjustments can be made on-the-go.
You can see how the equipment is
performing as you adjust.
The deck configuration is specifically
designed for use on edible product.
With only four bolts to remove to change
the complete deck , any edible product
can be ready to process in minutes.
Servicing the equipment and
troubleshooting requires little down time
with removable side panels that allow
easy access to the internal components.
The side panels also contain a dust filter
that keeps the components running cleaner
during operation.
Integral counterbalance is now standard
with all 2353 model Garratt Destoners.
DeStoner
Model
2353
For operations that require processing
edible product, Garratt Destoners can be
positioned before or after your Gravity
Table to effectively clean mud balls,
stones and debris from the material.
On-The-Go Adjustments. With all
Low HP Requirements. The Garratt
Interchangeable Deck. The Destoner
deck is easily converted to meet your
production demands. With a four bolt
attachment system you can remove and
replace the deck in a matter of minutes
to accommodate beans, peas, lentils or
most any edible product.
major controls on the outside, machine
settings can be made on-the-go. You
don’t have to shut down the equipment to
fine tune it.
Table
42” x 36”
HP Req’d
3 hp
Cap.bu/hr
250 bu/hr*
Weight
1,300 lbs
Destoner is powered by one 2 horsepower
and one 1 horsepower energy efficient
electric motors that run quiet and require
very little energy. It’s inexpensive to
operate and that helps keep your overall
expenses down.
Height
70”
Precise Controls. Unlike Destoners that
Heavy Frame Construction. The
Discharge
29.5”
feature air flow adjustments in increments,
Garratt Destoners feature an air flow
system that is adjusted by a spring loaded,
split sheave variable speed control.
The spring-loaded split sheave control
gives the operator the ability to make micro
adjustments and achieve precise results.
The deck shake is adjusted using a
variable frequency drive.
frame is constructed of 1/4” tubular steel.
This extra heavy frame design provides
greater stability during operation, reduces
vibration and adds longevity to the unit.
*Capacities are a guide line only.
Contact Dealer or Manufacturer for more
information.
Box 475, Milestone SK, Canada S0G-3L0
Phone 306-436-2178 Fax 306-436-4647
www.garrattindustries.com
Common Parts. Garratt Destoners use
common parts. No specialized bearings
are used, so when it comes to routine part
replacement, it usually can be conducted
by the operator with parts that are obtained
at local supply stores.
Printed in Canada