SP-727 728 717 718系列后视系统说明书

Transcription

Car Rear View Security System
User Guide
Warning
Specifications and manual content are subject to
change without any notice.
Before using the products, please read the
manual and preserve it well.
KIT CHARACTERISTICS
★Seven inch high resolution color TFT LCD.
★Free power input: DC11V-32V.
★Three-channel CVBS input,one-channel video input.
Before you request for repair
Phenomena below are not necessary mean failure with Display.
Please check off per following methods before you request for repair.
Phenomena
Possible Causes
★Normal/mirror image setup.
Improper connection with
Automobile adapter. Use of
unauthorized power supply.
Power Switch is on OFF position.
★Automatic/manual selection,when sutomatic,monitor in sleeping mode.
★Compulsory signal switch:The images from CAM1 or CAM2 will be activated
automatically,when backing up the car or opening the door of car.Reversing image
priority.
No picture, no sound
★Power supply of camera:while CAM1/CAM2 is in operation,power of CAM2/CAM1
will be cut off automatically.Effectively prolong the life of the cameras and fulfill
the objective of saving car power.
No picture
Check whether AV line is plugged
well.
★Jacks of AV input and output.
No sound
Whether audio wire is connected
well, or the sound volume is turned
off or till minimum.
Dark picture
Whether bright and contrast adjust
correctly;Whether environment
temperature too low.
No color
Whether color is well-adjusted
Upside down or lateral
inverted picture
Maybe improperly adjusted
Horizonal,Vertical on the remote
controller.
No backing function
(i.e. Picture)
Whether the single blown/blue
AV wire connecting to the positive
power cord of reversing light is
loose or not. Whether the
connection head of red CAM
socket is of poor contact.
★Automatic induction of LED indicator.It will be activated automatically while the
environment is dark,so that the user still can see the key of the monitor clearly.
★Double PCB,effectively heighten the ability of shock resistance.(8G)
★Remote control or manual operation.
★Shell of the monitor is made from ABS resisting hight temperature and blast.
★Blue light indicates startup,and red light indicates sleeping mode.
1
18
SYSTEM CONNECTION
PRECAUTIONS
Ⅴ、Trailer backup camera system connection
LCD Color Monitor
★Before using our products,please read this manual first.
★Before connection to power,please check the connection of cables,if improper
connection occurs,it may damage the picture。
P
P
CAM1
To start reversing wire CAM1
To start reversing wire CAM2
Trailer connector
Auto cigarette lighter Input:DC11~32V
CAM2
Rear View Camera
Camera
Waterproof Joint Cable
★The monitor is not waterproof,please don not place the monitor outdoor.
To Camera 1
★In order to avoid damaging the components,please do not use the products,while
welding in your car.
To Camera 2
C
M
★Please make sure all the cables are connected tightly,or else the system will not work
well.
★Do not open the housing of the camera,otherwise the waterproof device and
chipset inside it will be demaged.
C
Field of View:115°
★Please do not put the cables together with high temperature and rotary objects.
Field of View:95°
★In order to evacuate the hight temperature inside the monitor,please do not jam
the holes in the shell.
priority of reverse camera
★High voltage inside the monitor,non-specialist do not open the back shell.。
Truck
★While driving,please do not watch DVD,etc.
Accessories
U-shape Mount
Remote control
★Please do not use caustic chemicals to wipe the camera and monitor.
Cigarette lighter
adaptor
Warning
There is not any reparable parts in the system, so please do not take apart the
CCD camera or the monitor. It is dangerous with the high voltage in the products.
Itmust be the special worker to repair and regulate the products.
Notice
switching cable
Trailer extension
4pin screw AV Cable
extension cable
Trailer connector
Trailer extension
17
This manual is just for reference. Any changes with the information, we will not
give notice to yu. Any wrongor un-detailed thing, the explaination right belongs to
the manufacturer.
2
MONITOR
SYSTEM CONNECTION
Ⅰ、Technical parameters
Ⅲ、System connection diagram 3
Display Device
Color TFT-LCD
Size
LCD Color Monitor
To start reversing wire(Brown)CAM1
7"W
To start reversing wire(Blue)CAM2
Rear view Camera
Power input
11 - 32V voltage input
FUSE
Interface
Digital TTL
Analog
CAM1
800×RGB×480
480×RGB×234
CAM3
Active Area (mm)
153.60×86.64
154.08×86.58
Luminance (nits)
200 / 300
300
500:1
150:1
Response Time (ms)
25
25
View Angle (LR/UD)
140 / 110
140 / 130
CAM2
Resolution
YELLOW VIDEO
connect follow the jack mark“ ”
Contrast Ratio
Audio output
≤1 W
Loudspeaker
φ4.0cm,16Ω/1W
Connect plug
9/13pinsS-VIDEO
Application Power
Supply
Camera
C
C
C
M
Field of View:115°
1.AC power supply-AC Adapter(DC11V-32V)
2.Automobile storage battery (12V/24V) Automobile adapter
Power Consumption
Outer Dimension
AV input
WHITE AUDIO
5W Max
W185mm×H123mm×T50mm
Weight
Ⅴ、System connection diagram 4
LCD Color Monitor
To start reversing wire(Brown)CAM1
To start reversing wire(Blue)CAM2
350g
Power input
11 - 32V voltage input
FUSE
Rear view Camera
CAM1
CAM2
CAM3
Camera
Camera
C
C
Special Notice
Bright spots or dark spots may appear on the screen. This is a normal phenomenon
associated with the active matrix display technology and is not a sign of malfunction. Do
not attempt to maintain. For any failures, please turn off the unit immediately and contact
us or local dealer. This device integrates a great deal of fine electronic components.
Disassembly or alternation may result in
damages or breaks.
C
M
Field of View:115°
3
16
MONITOR
SYSTEM CONNECTION
Ⅰ、System connection diagram 1
Ⅱ、Appearance and accessories
CAM2
To Camera 2
extension cable
Color TFT-LCD Monitor
Waterproof connector
Reversing signal cable CAM1(brown)
Reversing signal cable CAM2(blue)
LCD Color Monitor
Sunshade
yellow Video
CAM1
AV input
4pin screw AV cable
white (audio)
AV Out-put
Earphone
Rear View Camera
C
MENU
①
M
②
③
LOGO
④
⑤
Bracket
⑦
⑧
CDS indicator
Brightness inductive component is
embedded, please do not block the hole.
Field of View:115°
Ⅱ、System connection diagram 2
⑥
①Receiver of Remote Controller
②VoluneCAM2
extension cable
To Camera 2
Reversing signal cable CAM1(brown)
Reversing signal cable CAM2(blue)
LCD Color Monitor
CAM1
③Volune+
④Menu
⑤Up
⑥Down
extension cable
To Camera 1
⑦CAM Switch
Rear View Camera
⑧Open/power
Camera
C
C
M
Field of View:115°
15
4
MONITOR
CAMERA
Ⅲ、P recautions
CAMERA
Image Pick-up Device
Storage and Keeping
TV System
Keep this machine
away from too hot
or too cold places.
The storage
temperature of this
machine is-20~60 ,
the application
temperature of this
machine is 0~40 .
7〃
veise
Never use this
machine near
bathtub, wash
basin, kitchen, etc
places with water
or at damp
basement,
swimming pool or
similar places.
7〃
veise
Image Size
7〃
veise
Avoid t h i s
machine f r o m
dropping o r
impacting.
7〃
veise
PAL
1/3"B/W CCD
veise
7〃
veise
Minimum illumination
Lens furnished
330 TV Lines
5
veise
420 TV Lines
330 TV Lines
1.0Lux(F:2.0) / 0 Lux At Night ( IR LED ON)
Board lens 2.9~8mm/F2.0(optional)
1/50(1/60)-1/100,000(sec)
Gain control
Automatic
S/N Ratio
More than 48db
Sync system
Internal synchronization
White Balance
Automatic(2500K to 9500K)
0.45
Automatic
1.0Vp-p 75Ω
veise
7〃
510(H)×492(V)
Horizontal:15.625KHz Horizontal: 15.7343KHz Horizontal:15.625KHz Horizontal: 15.7343KHz
Vertical: 50Hz
Vertical: 60Hz
Vertical: 50Hz
Vertical: 60Hz
Video Out
Alcohol
500(H)×582(V)
Scanning Frequency
Horizontal Resolution
510(H)×492(V)
Maintenance
Please plug off all connection wires before you start cleaning this
machine.
Please wipe the
machine cover,
display screen
and buttons with
soft cloth dipped
with little soft
abluent.
4.9mm×3.7mm
5.78mm×4.19mm
Never extrude or
frictionize this
machine with
sharp objects.
7〃
EIA
500(H)×582(V)
Electronic Shutter Control
7〃
CCIR
NTSC
γcharacteris
Never put this
machine within
certain box at
your will or
place it at toooscillating
place and under
further severe
collision.
B/W CCD CAMERA
1/3"CMOS
Picture Elements
Electronic Shutter Time
Never make the
TV set under
affection of
moisture, dust or
oil smoke etc.
Environment.
COLOR CMOS CAMERA
Never wipe this
machine with
abrasion cloth,
abstergent powder,
alcohol and
benzene etc. various
propellants or
chemical cleaning
media.
14
380 TV Lines
MONITOR
CAMERA
Ⅳ、MENU OPERATION
Ⅳ、Technical Parameters
CAMERA
TV System
Press to display options as following：
COLOR CCD CAMERA
1/3"SHARP CCD
PAL
Image Size
1/4"SHARP CCD
PAL
NTSC
NTSC
3.6mm×2.7mm
4.9mm×3.7mm
510(H)×492(V)
500(H)×582(V)
Scanning Frequency
Vertical: 50Hz
Vertical: 60Hz
Vertical: 50Hz
Vertical: 60Hz
420 TV Lines
510(H)×492(V)
500(H)×582(V)
Picture Elements
420 TV Lines
380 TV Lines
BRIGHTNESS
CONTRAST
SATURATION
Automatic
S/N Ratio
50
50
50
More than 48db
Sync system
White Balance
γcharacteris
0.45
ADJUST
SELECT
Automatic
Video Out
1.0Vp-p 75Ω
Note: Only when displaying the picture of NTSC system,it will show
the character of TINT in the picture menu
COLOR CCD CAMERA
CAMERA
1/3"SONY CCD
PAL
1/4"SONY CCD
NTSC
PAL
4.9mm×3.7mm
NTSC
3.6mm×2.7mm
Picture Elements
500(H)×582(V)
Scanning Frequency
Vertical: 50Hz
Vertical: 60Hz
Vertical: 50Hz
Vertical: 60Hz
510(H)×492(V)
420 TV Lines
1、Picture
bright,Contrast,color and TINT displays on the screen as illustrated below
Press Down key to select bright,press Left or Right adjust the analog quantity of bright
from 0 to 100.
Press Up or down key in turn to select contract color and TINT and press Left or Right adjust
the analog quantity of contract, Color and TINT.
PICTURE
1/50(1/60)-1/100,000(sec)
Gain control
Lens furnished
SYS TEM
380 TV Lines
Image Size
CHANNEL OPTION
Lens furnished
TV System
PICTURE
500(H)×582(V)
380 TV Lines
420 TV Lines
2、channel choose
Cam1,Cam2,CH prioity,CH delay,Delay time display on the screen as
illustrated below:
CHANNEL OPTION
510(H)×492(V)
380 TV Lines
CAM1
CAM2
CH PRIOITY
CH DELAY
DELAY TIME
NORMAL
MIRROR
CAM1
CAM1
0S
1/50(1/60)-1/100,000(sec)
Gain control
Automatic
S/N Ratio
ADJUST
SELECT
More than 48db
Sync system
White Balance
γcharacteris
0.45
Automatic
1.0Vp-p 75Ω
Video Out
13
Press Up or down key to select Cam1 or Cam2, press Left or Right to change image Mirror to
Normal or normal to mirror.
Press Up or down key to select CH prioity,press Left or Right to change Cam1 to Cam2 or Cam2
to Cams.
Press Up or down key to select CH delay,press Left or Right to choose Cam1 or Cam2 or both
Came1 and Cam2 with delay function.
Press Down key to select delay time,press Left or Right to adjust the delay time from 0s
to 30s
6
MONITOR
Attention:CH prioity,CH delay and delay time only operate when backing the car.for
example,Cam1 for CH prioity,if both reversing signal cales with power in,the screen just
displays picture from Cam1,otherwise it displays picture of Cam2. it can select Cam1 or
Cam2 or both with delay function,if Cam1 for CH delay and the delay time is 10s,when
backing the car(reversing cable of Cam1 power input)the screen will displays picture of
Cam1,but when you stop backing car,the screen still displays the picture of Cam1,it will
back to orginal picture after 10s.
CAMERA APPEARANCE
CAMERA
CAMERA APPEARANCE
24 IR LED
IR LED
IR project distance
18 meters
Power supply
DC12V/150mA
Dimension(mm)
Φ120x70(H)
Weight
300g
2.Automatic clamshell rear view camera
12 IR LED
IR LED
3、SYSTEM
SYSTEM
LAGUAGE
BLUE SCREEN
IR project distance
15 meters
Power supply
DC12/24V/500/250mA
Dimension(mm)
89(W) x 53(H) x 48(D)
Weight
450g
ENGLISH
ON
ADJUST
SELECT
Press Up or down key to select language,press Left or Right to select language to Chinese
or English.
Press Up or down key to select blue screen,press Left or Right to select blue screen on
or off
7
12
MONITOR REMOTE CONTROL
CAMERA
Ⅲ 、camera appearance and dimension
Ⅰ、Remote control appearence
1、Car Backup Camera
IR LED
18 IR LED
IR LED
6 IR LED
IR project distance
15 meters
IR project distance
5 meters
Power supply
DC12V/250mA
Power supply
DC12V/150mA
Dimension(mm)
76mm×70mm×84mm
Dimension(mm)
60mm×55mm×60mm
Weight
350g
Weight
330g
IR LED
18 IR LED
IR LED
8 IR LED
IR project distance
15 meters
IR project distance
5 meters
Power supply
DC12V/250mA
Power supply
DC12V/120mA
Dimension(mm)
80mm×63mm×70mm
Dimension(mm)
48mm×45mm×54mm
Weight
350g
Weight
300g
IR LED
NC
IR LED
8 IR LED
IR project distance
NC
IR project distance
5 meters
Power supply
DC12V/60mA
Power supply
DC12V/120mA
Dimension(mm)
Φ24mm×78mm
Dimension(mm)
Φ35mm×74mm
Weight
180g
Weight
240g
IR LED
9 IR LED
IR LED
NC
IR project distance
5 meters
IR project distance
NC
Power supply
DC12V/120mA
Power supply
DC12V/50mA
Dimension(mm)
Φ28mm×42.5mm
Dimension(mm)
Φ25mm×41mm
Weight
88g
Weight
80g
IR LED
NC
IR LED
NC
IR project distance
NC
IR project distance
NC
Power supply
DC12V/50mA
Power supply
DC12V/50mA
Dimension(mm)
Φ26mm×31.5mm
Dimension(mm)
Φ14mm×42mm
Weight
65g
Weight
100g
IR LED
NC
IR LED
NC
IR project distance
NC
IR project distance
NC
Power supply
DC12V/50mA
Power supply
DC12V/50mA
Dimension(mm)
260mm×32mm
Dimension(mm)
190mm×28mm×23mm
Weight
75g
Weight
120g
IR LED
NC
IR LED
12 IR LED
IR project distance
NC
IR project distance
15 meters
Power supply
DC12V/50mA
Power supply
DC12V/150mA
Dimension(mm)
68.5mm×45mm×41mm
Dimension(mm)
62mm×95mm×100mm
Weight
80g
Weight
120g
11
Mute
Power switch
VOL+
Up
Menu
Down
vol-
Call
Picture Mode
Timer
Language
CAM1/CAM2 shift
Calendar
Flip horizontal
FLIP virtical
Ⅱ、Battery of the Remote Controller
Puller
Enter
Using the push button(CR2025)
8
MONITOR REMOTE CONTROL
Ⅲ、Remote Control operation
CAMERA
Ⅰ、Characteristics of Rear View Camera
MUTE :
Press this button, sound disappears, press it again or
VOL+/ VOL- is to resume normal sound.
POWER :
Press this button is to turn off the monitor, press it again is to
turn on the machine.
1
2
3
4
5
6
7
Alloy shell and 6.8G-force rated shock resistant.
High resolution and low power consumption.
Audio/Video signal outpur.
4pin aircraft grade weatherproof connector.
Wide angle and adjustable bracket.
Water resistance: IP66.
High intensity infrared night vision illuminator.
Ⅱ、Sketch Map for 4-Pin Connector of Camer
CH button(up/down)
press this button to select MENU mode.
VOL - / + (Volume adjust/analog quantity):
Press VOL -,the volume of Display -/analog quantity-.
Press VOL +,the volume of Display +/analog quantity+.
1
2
4
3
1
Power IN (RED)
2
Ground (BLACK)
3
Audio(Green)
4
Video (YELLOW)
Menu
Press this button to select MENU mode.
MODE:
Press this button, users can realize the five picture statuses of
Standard,Soft, Vivid and light .
CALL:
Press this button is to display AV character currently watching
TIMER
Time setup of sleep off, it is used to set the time off within 120
minutes.
Language:
Press this button can realize the switch of Chinese, English,
COLOR
AV1 / AV2 shift:
Press this button is to realize switch between Cam1 and Cam2
pictures.
Press this button is to flip the picture horizontally.
Press this button is to flip the picture vertically.
9
10

SP-727 728 717 718系列后视系统说明书

Transcription

Similar documents

COBRACAM PRO

fastvision - Advanced Imaging

ele ctronics - rv care online catalog

ximea mq022

r-cam 1000 xs downhole camera system

Remotec Andros TM F6

Instruction Manual - Harbor Freight Tools

HERE - CREC Schools

Remotec Andros HD TM

AidiS`"Solutions for Smart Cities ofAll Sizes