basysPrint UV-Setter Series 7

UV-Setter Series 7
basysPrint GmbH
Gülzer Straße 15
basysPrint Inc.
19258 Boizenburg, Germany
301 Kelly Dr., Suite 7
Tel. +49-38847-99-0
Peachtree City, Ga 30269, USA
Fax +49-38847-99-191
Tel. +1-7 70-4 87-26 67
[email protected]
Fax +1-7 70-4 87-26 70
[email protected]
www.basysprint.com
www.punchinternational.com
Basys Repro & Print Inc.
216 St. David Street, Lindsay
Ontario, Canada K9V 4Z4
Tel. +1-705-878-9281
Fax +1-705-878-7029
[email protected]
Certified to DIN EN ISO 9001
© basysPrint GmbH. Subject to change without prior notice. CTcP™ and UV-Setter are registered trademarks of basysPrint GmbH.
All product names are trade names or registered trademarks of the respective companies.
CIP4 and the CIP4 logo are trademarks of the CIP4 Organization.
100000248 0904
UV-Setter
UV-Setter
UV-Setter
UV-Setter
UV-Setter
UV-Setter
UV-Setter
731e
731
732
733
734
735
736
Just right for the best printing plates in the world
Are you still using a conventional process? Perfect! Because that means you
are ideally equipped for a cost-effective
and above all problem-free move into
the world of Computer-To-conventional-Plate.
The UV-Setters from basysPrint, namely,
expose your trusted and proven conventional printing plates. And that is more
than just innovative, because there is no
better printing plate you could use.
After all, you rightly expect the best:
a durable, inexpensive and perfectly
exposed plate – properties which are
regularly confirmed by independent
institutes. Your individually preferred
plate, too, can be exposed with the
UV-Setters from basysPrint, thanks to
their use of the UV technology. Combine
your know-how regarding plate properties, chemistry and process stability with
that of basysPrint when it comes to
exposure.
The UV-Setters of Series 7 have been
designed for the 3b format and can be
used equally in the commercial,
packaging and book-printing sectors.
They expose all plate formats up to a
maximum 940 x 1150 mm (37" x 45").
The outstandingly simple handling of the
platesetters, along with their top-class
processing quality, is praised and appreciated by users all over the world.
basysPrint UV-Setter Series 7
Research, development, manufacture: All under one roof
Many years of research experience, comprehensive technology investments and
several hundred equipment installations
have earned basysPrint an unbeatable
know-how lead in the digital processing
of conventional printing plates. All
production phases for our UV-Setters™
are united under one roof, from design
conception to final acceptance. And
what is more, the UV-Setters undergo
continuous, practice-oriented further
development in cooperation with
leading print companies.
You can always look forward to equipment tuned to your individual needs
from basysPrint, as it is one of our most
important company principles to place
the satisfaction of our customers at the
focus of all efforts.
basysPrint – made in Germany!
10 benefits of CTcP
1
2
3
4
5
6
7
8
9
10
Low cost of consumables
Universal availability of conventional printing plates
Manufacturer-independent choice of printing plates
Maximum productivity
Ultimate reproduction quality
Straightforward workflow integration
100 %
196 %
Practice-proven systems and printing plates
197 %
203 %
Work under daylight conditions
Work on a flatbed
Conventional printing plate
Photopolymer CTP plate
Thermal CTP plate
Silver halide CTP plate
And any format
in-between are possible
Typical cost comparison of exposure systems using
different plate technologies
The costs reflect the factors printing plate, processor,
chemistry, light source and disposal.
Conventional printing plate = 100 %
Imaging of most UV materials
Minimum format
Maximum format
Plate variety for greater
independence
Halftone proofs on
UV materials
The UV-Setter
cuts the cost of CTP
Work under
daylight conditions
Flexibility of
a flatbed system
The UV-Setters operate in the wavelength range 360 - 450 nm. You can
thus choose from practically the whole
range of conventional offset printing
plates. A further advantage: Conventional printing plates are in most cases
immediately available.
Thanks to its use of UV light, the UVSetter is able to expose a variety of halftone proofing materials. As the printing
plate and the halftone proof are produced from the same file, furthermore,
production reliability is enhanced in the
downstream digital workflow.
CTP is acclaimed for the fact that it eliminates numerous work stages – film
exposure, make-up and platemaking –
and thus the associated costs. With a
laser-based process, however, the
general financial benefits are quickly lost
to the higher material costs (printing
plate, chemicals and disposal).
All UV materials (printing plates and
proof materials) can be processed under
daylight conditions. This eliminates the
need for dedicated processing facilities,
such as a darkroom or specially darkened
working areas with yellow illumination,
as required by violet CTP systems, for
example.
The flatbed system of the UV-Setter
Series 7 permits exposure of a wide
variety of plate sizes, from small format
up a maximum 940 x 1150 mm (37" x 45").
When using smaller formats, e.g. DIN A3,
it is naturally also possible to process
several plates simultaneously.
Negative-process plates are imaged
especially quickly by the UV-Setters, as
only the printing elements of the plate
surface need to be exposed.
50 printing plates from 15 manufacturers have already been tested
on the UV-Setters, and this list is
growing constantly. We would be
pleased to provide information
as to whether your preferred
plate type has been tested
successfully, and if so,
which exposure
times were
achieved.
With CTcP™, this problem is overcome:
You continue to use your inexpensive
conventional plates and your existing
processor. Disposal costs will thus also
remain low in the future. And as a backup, you can even keep your existing
imagesetter and plate frame. After all,
they process absolutely identical plates.
The general operating costs for the UVSetter, moreover, are exceptionally favorable.
Unrivalled cost efficiency: basysPrint UV-Setter Series 7
A further advantage of the flatbed is the
facility to replace the mounting strips, so
as to be able to use different register systems. Upon request, the flatbed can also
be fitted with register pins or 3-pin plate
alignment.
Sharp as a knife, pixel for pixel
Digital Screen Imaging (DSI) from basysPrint
To directly expose data, basysPrint has
extremely accurate positioning system
quality and excellent printing, even in
developed the Digital Screen Imaging
puts the images together with a tole-
high production runs.
(DSI) process, based on Digital Light
rance of ± 2 µm (microns).
Laser technology creates round pixels
Processing™ (DLP™) from Texas
Instruments Inc.
UV lamp
Condenser
DMD
The core of the process is a micromirror
chip (Digital Micromirror Device™, DMD™).
cover the plate. The UV-Setter achieves
There are approx. 1.3 million single,
hitting the mirror surface during imaging
Because of the round laser spots, substantially more pixels are needed to
Reflector
Lens
digitally controllable micromirrors on
the approx. 2 cm² surface area. The light
that, for technical reasons, overlap.
high imaging quality even at low resolutions, leading to shorter RIP times and
less quantities of data.
Mirror 1
Mirror 2
is either projected onto the plate surface
Exposure area
through the lens or reflected away, resulting in a screen image on the plate.
Picture segments are projected by
the micromirrors during the exposure
process. The composite picture is then
formed from the picture segments in
a series of quick exposure steps. The
The heart of every basysPrint UV-Setter:
the micromirror chip from Texas Instruments.
The pixels created are square,
and depending on the resolution,
17 to 28 µm in size. The extremely sharp
edges ensure high imaging quality. The
clear transition from exposed to unexposed surfaces of the conventional
offset plate provides high reproduction
The individual mirrors can be seen
under the tip of a pin.
On the printing plate, each pixel has very sharp
edges, ensuring high image print quality.
Ensuring an optimum workflow
Typical existing workflow
Data
The Navigator RIP system,
developed by basysPrint
on the basis of Harlequin
Scriptworks, is known as
one of the fastest RIPs on
the market. It runs on both Windows
and Macintosh platforms. Thanks to
the integrated super-cell technology,
the desired gray levels (max. 4096) are
achieved even at low resolutions in
conjunction with high screen rulings.
The RIP supports, among others, PostScript levels 1-3, JPEG, DCS-2, EPS,
TIFF-6, PDF and optionally TIFF/IT-P.
The two software modules
Proof
AutoProof and AutoCIP
round off the workflow
configuration. AutoProof enables form
proof output without a separate RIP
process for the proofer. AutoCIP is used
to generate CIP3 data in PPF format. The
standardized PPF files can then be sent
to the control system of the printing
press, where they serve for internal
presetting of the ink metering functions.
RIP
In cooperation with Glunz
& Jensen, basysPrint supplies processors for all
plate formats. One of the key advantages
of these plate processors is their precise
transport system. The enclosed immersion bath reduces the consumption of
processing chemicals and prevents oxidation of the developer fluids. The Interplater is complemented by an automatic
cleaning system.
Every UV-Setter can be integrated
flexibly into existing prepress set-ups.
basysPrint offers you individual solutions
contributing to greater productivity and
efficiency.
The basysPrint service team is on hand
to assist you in establishing a successful
and effective workflow – with analyses
of relevant parameters, elaboration of
a system solution, and delivery of the
most suitable equipment.
PS
PS
Cyan
Magenta
Yellow
Black
Many factors influence decisions regarding investment in a new CTP system:
the existing equipment, the type of work
done, infrastructure, staff know-how
and, not least, customer demands.
Computer-to-Film
Platemaking
1-bit
TIFF
Processing
Print/Finishing
Processing
Print/Finishing
basysPrint
Interplater
Print/Finishing
Platemaking
CTF
Proof
Plate store
Integration of the UV Setter into the existing workflow
Data
Imposition
RIP
PS
PS
Cyan
Magenta
Yellow
Black
Cyan
Magenta
Yellow
Black
Daten
Imposition
Daten
Processor: basysPrint Interplater
Proof
Integration or complete solution for
your workflow
CIP3/PPF
UV-Setter
1-bit
TIFF
Proof
Plate store
Complete solution from basysPrint
Data
Imposition
PS
basysPrint Navigator
PS
Cyan
Magenta
Yellow
Black
Daten
Cyan
Magenta
Yellow
Black
AutoProof and AutoCIP
Cyan
Magenta
Yellow
Black
Proof
RIP: basysPrint Navigator
CIP3/PPF
basysPrint AutoCIP3/PPF
UV-Setter
1-bit
TIFF
basysPrint
Proof Autoproof
Plate store
Seamless for every infrastructure
1614 mm
1730 mm
UV-Setter 732
UV-Setter 736
2650 mm
4390 mm
UV-Setter 736: Full automation for 8-up exposure
With the automation of the
exposure flatbed, image the plate and
the automation, the rewards for investing
UV-Setter 736 basysPrint offers you all
then forward it to the online processor.
in the UV-Setter will be repaid even
the benefits of unattended operation.
With the automation you can have up to
faster, since operator intervention is kept
Once you have loaded the plates in
3 different plate sizes available online.
to a minimum and the system can run
one of the cassettes, the machine will
automatically remove the slip sheet,
punch the plate, transport it to the
Each cassette can hold between
unsupervised for several hours.
Technical data
Exposes UV-sensitive proof materials
0.15 mm. The cassette loading can be
Flatbed system with vacuum table
The full automation is available with 3
to 5 cassettes. You can start with 3 and
upgrade to 5 cassettes later on. And with
731
732
733
734
735
736
2890 kg
6400 pounds
2890 kg
2940 kg
2890 kg
2940 kg
4450 kg
4500 kg
6400 pounds
6500 pounds
6400 pounds
6500 pounds
9820 pounds
9920 pounds
2650 x
2040 x
1620 mm
2650 x
2040 x
1620 mm
2650 x
2040 x
1620 mm
2650 x
2040 x
1620 mm
2650 x
2040 x
1620 mm
4390 x
2040 x
1730 mm
4390 x
2040 x
1730 mm
(104" x 80" x 64")
(104" x 80" x 64")
(104" x 80" x 64")
(104" x 80" x 64")
(104" x 80" x 64")
(173" x 80" x 69")
(173" x 80" x 69")
6,0/7,5
5/6
4/5
5/6
5,5/6,5
6,5/7,5
Exposes conventional offset printing plates
100 plates at 0.3 mm and 150 plates at
done under normal daylight conditions.
731e*
Variable register system configuration
1 exposure head
2 exposure heads
Semi-automatic plate handling system
Fully automatic plate handling system
The cassette carriage with space
for 5 cassettes. Each cassette holds
between 100 and 150 plates depending
on plate thickness.
The transport carriage
removes the slip sheet and
transports the printing plate to the
exposure flatbed.
Maximum productivity from minimum space
Weight
Dimensions of exposure unit (W x D x H)
Connected load in kW
6,0/7,5
Resolutions
900, 1270, 1500 dpi
Material format
max. 940 mm x 1150mm (37" x 45")
Material thickness
max. thicknesses 0.15 mm–0,5 mm (0.006"–0.02")
Wavelength
360 nm–450 nm
Operating temperature
18°C–24°C (65–75°F)
Relative humidity
20%–80%, non condensing
Electrical connection
400 V, 3 Ph, N, PE, 50/60 Hz, 3 x 16 A
* Only Bacher Control 2000 pin bar, max. screen ruling 175 lpi,
only standard vacuum layout, setup for only one plate type.
We are here to help you:
24 hours a day, 365 days a year
Our technical service department
supports you whenever and wherever
you need our assistance, with immediate
response worldwide.