THE BELSAW COMPANY

Transcription

THE BELSAW COMPANY

THE
BELSAW
COMPANY
Woodworking Machinery & Accessories
2156 Zanker Road , San Jose, CA 95131
1-800-468-4449 Fax 1-408-453-5515
www.belsaw.com
2004
Serving
the Woodworking Industry
since 1926!
s
e
c
i
r
P
e
Som hanged g
C
icin
e
r
p
v
t
Ha all for curren
ec
s
a
e
l
P
Introducing to the
Belsaw family:
Now also stocking
Planer/Molders from:
Woodworking
Machinery
© The Belsaw Company 2004. We reserve the right to correct any typographical and pictorial errors when ordering.
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
Belsaw Planer / Molder Accessories
Feedworks Chain
Replacement Kit
We stock all the
current accessories
for your 12” Belsaw,
Foley-Belsaw, and
Powermatic
Planer/Molders!
This kit contains the three drive
chains in the model 985 feedworks
system. Also included is the 20” V-Belt
that transfers power from the cutterhead to
the feedworks. Replacing all three chains at the
same time will ensure longer sprocket life and deliver consistent transfer of drive power to the feed rollers.
#BRK-1
#BRK-2
For model 985 . . . . . . . . . . . . . . . . . . . . . . . . $ 34.95
For models 910 & 912 . . . . . . . . . . . . . . . . . . $ 47.95
Complete Feedworks Rebuild Kit
“Tri-Sand” Abrasive Surfacing System
Completely rebuild your planers
feedworks system with this kit.
Includes all sprockets, chains,
bushings, link adjustment
assemblies, 20” V_Belt, and sprocket weldments to replace worn out feedworks systems. This kit will breathe new life
into your planer/molder, giving you many more
years of service. Will not fit on Belsaw planer/molder models 910/912. Please contact Customer Service
for other models.
Install this optional accessory on your
12” planer-molder to convert it into a
surface sanding machine! Very easy to
install on the cutterhead of your 12”
planer/molder. With this accessory, you
will be able to sand away any remaining
mill marks on your planed lumber and
save yourself time from tedious hand
sanding. This system comes complete with all required aluminum gibs,
pulley, a set of three (3) 100-grit abrasive pads, and a V-Belt.
#BRK-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.95
Drive Sprocket Replacement Kit
This kit contains all the sprockets found in your planer/molders feedworks
system. Kit fits only the current model 985 planer/molders.
#BRK-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 349.95
#4500540
#3703040
#3703041
#3703042
Tri-Sand Attachment . . . . . . . . . . . . . . .
80 Grit replacement sheets (3 per pack) .
100 Grit replacement sheets (3 per pack)
150 Grit replacement sheets (3 per pack)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. $ 96.50
. $ 8.25
. $ 8.25
. $ 8.25
T-Handle Hex Keys
Replacement Feed Rollers
#4509062
#4549008
12” Feed Roller . . . . . . . . . . . . . . . . . . . . . .$ 44.96
8” Feed Roller . . . . . . . . . . . . . . . . . . . . . . .$ 24/95
Feed Roller Rebuild Kits
Replace your planer/molder’s worn and grooved feed rollers to restore feed performance. This kit includes the front and rear feed rollers, feed roller bushings, and a complete set of feed roller tension springs. With this kit, any feeding problems you may have should be eliminated.
#BRK-4
#BRK-5
For model 985 . . . . . . . . . . . . . . . . . . . . . . . . $119.95
For models 910 & 912 . . . . . . . . . . . . . . . . . $119.95.
Drive Bushing Replacement Kits
This kit contains all the bronze oilite bushings found in your planers feedworks system. We suggest you replace all bushings at the same time.
#BRK-6
#BRK-10
For model 985 . . . . . . . . . . . . . . . . . . . . . . . . $ 22.95
For models 910 & 912 . . . . . . . . . . . . . . . . . . $ 21.95
Bed Elevation Repair Kit
Feed-Rate Increase Sprocket
Increase your 12” planer/molder’s feed rate by 60%!
With just the change of a sprocket, you can speed up
the feed rate of your Belsaw 12” planer up to 20 feet
per minute - a 60% increase over the standard 12 feet
per minute rate. Your owners manual leads you step
by step through installation. Ideal for owners who production-plane lumber.
#4500551
#4509583
For model 910/912 planers . . . . . . . . . . . . . . $ 49.95
For models manufactured after 1983 . . . . . . . $ 41.50
Planer Bed Wax
Extends the life of feed rollers, chains, bearings
and sprockets by reducing feed drag. Long lasting and very easy to apply. Does not contain silicone. Use on virtually any machine surface.
Protects against corrosion. 14 ounce can.
#PTCW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Renew the elevation system with this kit that contains the four corner
sprockets, bushings and roller chain. Works on models 985, 910 and 912.
#BRK-7
Fits any Belsaw 12” Planer-Molder as well as the
Sears 12” Planer-Molders. Set includes 4 threaded stem casters with a positive locking foot brake
for stability after being moved to the desired location and all mounting hardware.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 124.95
This set includes six 5-3/4” gibs, three 1” gibs, three 1” gib spacers and
all of the necessary socket set screws. Works on models 985, 910 and 912.
1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 79.95
$ 17.95
Locking Caster Kit
Aluminum Gib Replacement Kit
#BRK-9
For adjusting jack screws . . . . . . . . . . . . $ 2.99
For adjusting gib screws . . . . . . . . . . . . . $ 3.49
#51610
#51612
Replace your
worn feed
rollers with this genuine replacement. Manufactured to original specifications. Sold individually.
#4500526
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 62.50
Monday - Friday
Belsaw Planer / Molder Accessories
Dial Indicator Knife Setting Gauge
Belsaw Planer Knife Sets
Position knives to within thousands of an
inch. Once you set your knives using this
gauge, you will never use anything else again.
Large dial indicator face is easy to read.
Indicator has 1” travel with secondary dial.
Measures in increments of .001” Large indicator anvil and instructions are included.
Belsaw Replacement Planer Knives
Made from only the highest quality materials. We
also have specially priced
our sets with quantity
discounts so you can stock up with extra sets on hand. 12” knives are
sold three to a set, 8” are sold two to a set.
Part #
Size
Price / 1 ea
Price / 2 ea
12”
$ 48.50 ea
$ 41.25 ea
4501958
4540858
8”
$ 36.95 ea
$ 32.95 ea
Belsaw 12” Micro-Bevel
Premium Quality Planer Knives
These high speed steel knives feature a secondary
bevel ground at the tip that will allow you to get
much more life out of your knives before they
require sharpening. Further benefits such as a
smoother planed finish make Micro-Bevel knives
the choice of professionals! Sold three to a set.
#SC-001G
The “Sure-Set” Knife Setting Gauge
To use this gauge, you run it along the cutterhead
and the adjustable floating top pin will indicate knife
alignment. An economical alternative to more
expensive gauges.
#4501960
Standard
This simple gauge straddles the top of the cutterhead over the planer knives. Simply raise the knife
until it makes contact with the gauge. Instructions
are included.
Micro-Bevel
#MGA-B14D . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
Belsaw Solid Carbide Knives
#TN632SC
. . . . . . . . . . . . . . . . . . . . . . . $ 32.50
Economy Knife Setting Gauge
12” Micro-Bevel knives - one set . . . . . . . . . . $ 89.95 ea
...
.
#4501963
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 76.50
Visit the Belsaw website at:
Three to a set . . . . . . . . . . . . . . . . . . . . . . . . . $ 349.95
www.belsaw.com
Molding Guide System Kit
The molding guide system will save you time
when making the transition from planing
to molding operations. Allows for precise alignment and support for workpiece while molding. Includes all
hardware and guides needed to attach
to your shop-made bed board.
#4509501 . . . . . . . . . . . . . $ 69.95
Cutterhead
Edge Guide
Edge Molding Guides
Use the optional edge molding guides
when molding edge profiles such as tongue
and groove patterns. Made from heavy
gauge formed steel. Zinc plated to guard
against corrosion. Sold individually.
4 required.
Powermatic 15” Closed Stand
Planer / Molder
•
•
•
•
•
•
•
•
Model #PM15
3 knife cutterhead
5 HP, 1 phase, 230V motor
Feed rate - planing: 20 FPM
Feed rate - molding: 10 FPM
6-1/2” max planing thickness
8” min planing length
Weight: 550 lbs.
* See the following pages for
molding knife patterns
#4509492 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.25 ea
#1120003
Dust Collector Attachment
Connect your planer to a dust collector for better dust control in the shop. Includes dust port
for 4” hose and internal dust channel. Very
easy to install. Fits Belsaw model 985 and
similar models. Will not fit model 910/912
planers.
#4500592 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $89.95
$ 2,469.00
s
Index on
page 62
Monday - Friday
2
Belsaw Molding Knives Call for Prices
All of our wood molding pattern knives are expertly ground from 1/4” thick high
speed steel knife stock hardened to 65c on the Rockwell Scale. The profiles and
sizes shown are those that reflect the most current popular wood moldings. Our
molding knives come complete with all gibs and balance weights to match your
selected knife pattern. Please note that certain patterns (such as the crown) require
more than one knife to complete the pattern. When the word “Top” follows the pattern number, this knife will cut the decorative edge and the bottom knife will product
the back angles. These patterns will work in any Foley-Belsaw, Foley-United,
Belsaw, Sears, or Powermatic Planer / Molders and 13” Woodmaster, RB Industries
& Grizzly Planer/Molders.
If you need a profile that is not pictured here, or wish to have a
pattern custom ground to your specifications, please call or fax
Belsaw Customer Service at:
1-800-468-4449 (Fax 1-408-441-1222)
Standard Crown Moldings
50
51
52
53
54
Wide Crown Moldings
Many homes
around the turn
4570460
of the century
used very wide
4570450
crown moldings
to bridge the gap
4570440
between the walls
and ceiling. A common practice was to create a “build-up” molding with a variety
of patterns to give the illusion that the crown molding was extremely wide. With
nine and ten foot ceilings, a large crown will give a balanced feel to the room.
Please note that the top knife is used to cut the decorative face and the bottom
knife cuts the back angles.
Order #
4570460
4570461
4570450
4570451
4570440
4570441
Profile
5”
5”
5-1/4”
5-1/4”
5-1/2”
5-1/2”
Price
$ 106.95
$ 106.95
$ 108.95
$ 108.95
$ 110.95
$ 110.95
Top
Bottom
Top
Bottom
Top
Bottom
49
66
48
Standard Bed Moldings
47
67
68
57
58
59
70
71
72
74
75
76
60
Similar to Crown moldings but used to bridge smaller areas. crowns are always
“sprung” while beds are either sprung or plain. A sprung molding has the interior
corner beveled off to better fit a right angle joint.
Order #
4570470
4570471
4570480
4570481
4570490
4570491
4570500
4570501
4570510
4570511
4570520
4570521
4570530
4570531
4570540
4570541
4570570
4570571
4570580
4570581
4570590
4570591
4570600
4570601
4570660
4570661
4570670
4570671
4570680
4570681
3
Profile #
WP47
WP47
WP48
WP48
WP49
WP49
WP50
WP50
WP51
WP51
WP52
WP52
WP53
WP53
WP54
WP54
WP57
WP57
WP58
WP58
WP59
WP59
WP60
WP60
WP66
WP66
WP67
WP67
WP68
WP68
Size
11/16” x 4-5/8”
11/16” x 4-5/8”
11/16” x 4-1/4”
11/16” x 4-1/4”
11/16” x 3-5/8”
11/16” x 3-5/8”
11/16” x 3-1/2”
11/16” x 3-1/2”
11/16” x 3-1/4”
11/16” x 3-1/4”
11/16” x 2-3/4”
11/16” x 2-3/4”
11/16” x 2-5/8”
11/16” x 2-5/8”
11/16” x 2-1/4”
11/16” x 2-1/4”
11/16” x 3-1/4”
11/16” x 3-1/4”
11/16” x 2-3/4”
11/16” x 2-3/4”
11/16” x 2-1/4”
11/16” x 2-1/4”
11/16” x 1-3/4”
11/16” x 1-3/4”
11/16” x 3-1/4”
11/16” x 3-1/4”
11/16” x 2-1/4”
11/16” x 2-1/4”
11/16” x 1-5/8”
11/16” x 1-5/8”
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Price
$ 105.95
$ 105.95
$ 104.95
$ 104.95
$ 99.95
$ 99.95
$ 98.95
$ 98.95
$ 96.95
$ 96.95
$ 92.95
$ 92.95
$ 89.95
$ 89.95
$ 87.95
$ 87.95
$ 106.95
$ 106.95
$ 97.95
$ 97.95
$ 92.95
$ 92.95
$ 87.95
$ 87.95
$ 102.95
$ 102.95
$ 92.95
$ 92.95
$ 85.95
$ 85.95
Order #
4570700
4570701
4570710
4570711
4570720
4570721
4570740
4570741
4570750
4570751
4570760
4570761
Profile #
WP70
WP70
WP71
WP71
WP72
WP72
WP74
WP74
WP75
WP75
WP76
WP76
Size
11/16” x 2-3/4”
11/16” x 2-3/4”
11/16” x 2-5/8”
11/16” x 2-5/8”
11/16” x 2-1/4”
11/16” x 2-1/4”
11/16” x 1-3/4”
11/16” x 1-3/4”
11/16” x 1-5/8”
11/16” x 1-5/8”
11/16” x 1-1/2”
11/16” x 1-1/2”
Variable Width
Bottom Knife Sets
Can be set up and used with any of the
above top knife sets. Simply adjust to
desired width of bottom cut. Includes
right and left cutters.
4575450
4575238
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Price
$ 97.95
$ 97.95
$ 96.95
$ 96.95
$ 92.95
$ 92.95
$ 87.95
$ 87.95
$ 85.95
$ 85.95
$ 84.95
$ 84.95
Molding
L
R
45° Variable width knife set . . . . . . . . . . . . . . .$ 99.95
37° / 53° Variable width knife set . . . . . . . . . .$ 109.95
Please Note:
Profiles shown are NOT to scale
Monday - Friday
Call for Prices Belsaw Molding Knives
Standard Cove Moldings
81
83
Profile #
WP81
WP81
WP82
WP82
WP83
WP83
WP84
WP84
WP85
WP85
WP86
WP86
WP90
WP92
WP93
WP96
WP101
Size
11/16” x 3-1/4”
11/16” x 3-1/4”
11/16” x 2-3/4”
11/16” x 2-3/4”
11/16” x 2-5/8”
11/16” x 2-5/8”
11/16” x 2-1/4”
11/16” x 2-1/4”
11/16” x 1-3/4”
11/16” x 1-3/4”
11/16” x 1-5/8”
11/16” x 1-5/8”
3/4” x 1-1/8”
3/4” x 7/8”
3/4” x 3/4”
5/8” x 3/4”
1/2” x 1/2”
84
85
92
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Top
Bottom
Single Cut
Single Cut
Single Cut
Single Cut
Single Cut
86
93 101
93
Price
$ 100.95
$ 100.95
$ 97.95
$ 97.95
$ 95.95
$ 95.95
$ 92.95
$ 92.95
$ 87.95
$ 87.95
$ 85.95
$ 85.95
$ 83.95
$ 79.95
$ 79.95
$ 76.95
$ 66.95
Notched Cove Molding
Size
3/4” x 3-1/2”
3/4” x 3-1/2”
Profile #
WP806
WP836
WP866
WP896
WP926
Size
x 1-3/8”
x 1-3/8”
x 1-3/8”
x 1-3/8”
x 1-3/8”
WP926
WP866
1/2”
1/2”
1/2”
1/2”
1/2”
Price
$ 55.95
$ 55.95
$ 55.95
$ 55.95
$ 55.95
Standard Base Shoe &
1/4 Round Moldings
Use these profiles to cover the joint
between the base mold and the finish flooring to seal against moisture
and dirt.
105
106
108
Order #
4571050
4570106
4570107
4570108
4571260
4571310
Profile #
WP105
WP106
WP107
WP108
WP126
WP131
107
126
131
Size
3/4” x 3/4”
11/16” x 11/16”
5/8” x 5/8”
1/2” x 1/2”
1/2” x 3/4”
1/2” x 3/4”
Price
$ 55.95
$ 69.95
$ 68.95
$ 68.95
$ 51.95
$ 53.95
Standard Base Cap Moldings
Very similar to the standard cove moldings we offer but modified with a notch both at
the top and bottom of the pattern. Ideal when used in combination with other moldings for a “built-up” look. Finished size is 3/4” x 3-1/2”.
Order #
4579515-T
4579515-B
Order #
4578060
4578360
4578660
4578960
4579260
WP836
WP806
82
90
Order #
4570810
4570811
4570820
4570821
4570830
4570831
4570840
4570841
4570850
4570851
4570860
4570861
4570900
4570920
4570930
4570960
4571010
In window frame applications, use these moldings
to hold the sashes in
place. On doors, they
stop the door in the
closed position. These
five profiles have proven to be the most popular.
WP896
Standard Stop
Moldings
Designed for use in a corner as a graceful blend
between two right angle surfaces, as at floor or
ceiling. Smaller sizes are often used to clean
up corners in paneling or to give a finished
look beneath the overhang of a desk top.
Price
$ 94.95
$ 94.95
Please Note:
Designed for use on the top
edge of a standard flat
baseboard to give it a more
ornate look. It will also
close the gap between an
uneven wall and baseboard.
They will also provide a
neat looking trim where
brick or stucco meet wood
on exterior walls.
Order #
4571630
4571650
4571660
4571670
4571720
4572610
For additional knives,parts or technical service on
current or older style Belsaw Planer/Molders...
Visit the Belsaw Website at:
www.belsaw.com
163
Profile #
WP163
WP165
WP166
WP167
WP172
WP261
165
166
167
Size
11/16” x 1-3/8”
11/16” x 1-3/8”
11/16” x 1-1/4”
11/16” x 1-1/8”
5/8” x 3/4”
5/8” x 7/8”
172
261
Price
$ 66.95
$ 66.95
$ 66.95
$ 63.95
$ 58.95
$ 60.95
See our selection
of Rosette Knives
on page 33
Monday - Friday
4
Belsaw Molding Knives Call for Prices
Standard Panel Moldings
Wainscot Cap Moldings
Commonly used to top off baseboard and panel
wainscot. Mitered and snugged into the corners
formed when a flat panel is recessed within a frame,
this molding gives the appearance of richly carved
paneling.
Order #
4579503
4579523
Originally used on the rake of a building or around exterior window frames. Also
commonly used to top off baseboard and panel wainscot. Mitered and snugged into
the corners formed when a flat panel is recessed within a frame, this molding gives
the appearance of richly carved paneling.
4579503
Size
3/4” x 1-1/2”
3/4” x 1-3/4”
216
4579523
Price
$ 88.95
$ 94.95
210
210
213
214
217
218
220
220
Wainscot Cap Moldings
209
Battens are symmetrical patterns that are often used to conceal the line where two
parallel boards or
panels meet.
224
Similar to panel
strip/mullion casing moldings that
229
are applied over
window treatments.
228
Order #
4572240
4572280
4572290
Profile #
WP224
WP228
WP229
Size
9/16” x 2-1/4”
11/16” x 2-1/8”
11/16” x 1-5/8”
Price
$ 76.95
$ 76.95
$ 72.95
Wainscot Molding
Wainscot molding is very popular in remodeling projects or new construction because
of the warmth it imparts to a room. After installation, cap off you new wainscot with
your choice of cap moldings. Available in two different sizes to suit your needs.
4579509
4579526
Order #
4579509
4579526
Size
1/2” x 3-3/8”
3/4” x 3-3/4”
Price
$ 110.95
$ 114.95
Standard Shelf Edge / Screen Moldings
When used as a Shelf Edge, it gives a
highly decorative edge to wooden shelves
or does a fine job of covering the exposed
edges of plywood. Used as Screen
Molding, it is intended to cover the tacks
or staples that hold in the screen material.
Note that #4579531 can be easily
trimmed down to reduce the thickness.
Order #
4579531
4571400
4571420
4571440
Profile #
WP140
WP142
WP144
140
207
Order #
4572070
4572080
4572090
4572100
4572120
4572130
4572140
4572160
4572170
4572180
4572200
4572220
Profile #
WP207
WP208
WP209
WP210
WP212
WP213
WP214
WP216
WP217
WP218
WP220
WP222
Size
11/16” x 2-1/2”
11/16” x 2-1/4”
11/16” x 2”
11/16” x 1-5/8”
11/16” x 2-1/2”
9/16” x 2”
3/8” x 1”
9/32” x 1-3/8”
11/16” x 1-3/4”
11/16” x 1-1/2”
11/16” x 1-3/4”
11/16” x 1-1/2”
Wainscot & Plycap
Moldings
290
291
Price
$ 83.95
$ 79.95
$ 76.95
$ 73.95
$ 83.95
$ 76.95
$ 66.95
$ 78.95
$ 76.95
$ 74.95
$ 76.95
$ 72.95
292
294
These multipurpose moldings can
be used in numerous ways. You
can use them to trim the upper
edge or top of a wainscot or to
cover the unsightly edges of plywood. When attached to the edge
of plywood, you can easily make
beautiful shelving.
Order #
4572900
4572910
4572920
4572940
Profile #
WP290
WP291
WP292
WP294
Size
11/16” x 1-3/8”
9/16” x 1-3/8”
9/16” x 1-3/8”
11/16” x 1-3/8”
Price
$ 56.95
$ 56.95
$ 56.95
$ 56.95
142
4579531
See our selection
of Rosette Knives
on page 33
144
Size
3/4” x 3/4”
1/4” x 3/4”
1/4” x 3/4”
1/4” x 3/4”
Please Note:
5
208
Price
$ 66.95
$ 49.95
$ 49.95
$ 49.95
Please Note:
Monday - Friday
Size
11/16” x 3-1/2”
11/16” x 3-1/2”
11/16” x 3-1/2”
11/16” x 3-1/2”
11/16” x 3-1/2”
11/16” x 3-1/2”
5/8” x 3-1/2”
Price
$ 72.95
$ 88.95
$ 77.95
$ 77.95
$ 77.95
$ 77.95
$ 77.95
Standard & Antique Chair Rail Moldings
4579501
4579524
4579528
304
303
298
390
297
Chair rail moldings have become extremely popular over the years for use in new
construction or renovation. These are usually applied one third the distance
between the floor and a ceiling of a room and encircle the perimeter. These moldings provide a beautiful accent for nearly any room.
Order #
4573010
4573060
4573150
4573160
4573210
4573240
4573260
4573270
4573310
4573320
4573410
4573460
4573510
4573560
4573610
4573660
4573710
4573760
4573810
4573860
4573900
Profile #
WP301
WP306
WP315
WP316
WP321
WP324
WP326
WP327
WP331
WP332
WP341
WP346
WP351
WP356
WP361
WP366
WP371
WP376
WP381
WP386
WP390
Size
11/16” x 2-1/2”
11/16” x 2-1/4”
11/16” x 2-1/2”
11/16” x 2-1/4”
11/16” x 2-1/4”
11/16” x 2-1/4”
11/16” x 2-1/4”
11/16” x 2-1/4”
11/16” x 2-1/2”
11/16” x 2-1/4”
5/8” x 2-1/2”
5/8” x 2-1/4”
11/16” x 2-1/2”
11/16” x 2-1/4”
11/16” x 2-1/2”
11/16” x 2-1/4”
11/16” x 2-1/2”
11/16” x 2-1/4”
11/16” x 2-1/2”
11/16” x 2-1/4”
11/16” x 2-5/8”
WP390
WP371/376
Profile #
WP412
WP444
WP448
WP602
WP642
WP672
WP702
WP381/386
Order #
4574120
4574440
4574480
4576020
4576420
4576720
4577020
WP361/366
602
WP351/356
702
WP341/346
448
WP331/332
672
WP327
444
WP326
642
WP324
412
WP321
Very similar in shape to standard casing profiles, however these moldings are normally larger. These designs serve either as trim for doors and windows or as baseboard
where walls and floors meet. Of all of the molding knives we manufacture, these are
by far the most popular.
WP315/316
Casing Knives
These profiles provide a decorative trim around a doorway, window or other opening.
Suitable for use both indoors and as an outside trim molding. Back relief knife recommended (See Below).
WP301/306
Standard Base Moldings
Price
$ 84.95
$ 80.95
$ 83.95
$ 80.95
$ 80.95
$ 80.95
$ 80.95
$ 80.95
$ 87.95
$ 85.95
$ 87.95
$ 85.95
$ 87.95
$ 85.95
$ 87.95
$ 85.95
$ 87.95
$ 85.95
$ 87.95
$ 85.95
$ 87.95
Back Relief Knife Sets
Order #
4570297
4570298
4570303
4570304
4573900
4579528
4579524
4579501
Profile
WP297
WP298
WP303
WP304
WP390
Size
11/16” x 3”
11/16” x 2-1/2”
9/16” x 2-1/2”
1/2” x 2-1/4”
11/16” x 2-5/8”
3/4” x 3”
3/4” x 2-5/8”
3/4” x 2-1/2”
Price
$ 88.95
$ 88.95
$ 88.95
$ 88.95
$ 87.95
$ 99.95
$ 104.95
$ 104.95
Custom Knife Information
At The Belsaw Company, we can custom grind knives to your specifications allowing you to design your own unique profiles or to match an
existing pattern. Simply forward your wood sample (if available) or a
sketch of your desired pattern and we will promptly furnish a quotation
to complete the pattern. There is no charge for this service. After
your order has been accepted, delivery time takes about 2-3 weeks.
You will receive the pattern ground to your specifications, all steel and
aluminum gibs, counterweights and installation instructions.
By putting a back relief on a molding pattern such
as a base molding, you will limit the contact that
the pattern makes against a wall providing a better fit. Almost a necessity when butting moldings
up against lath and plaster walls. Packaged in
sets of 3 knives that are used with the standard planer knife gibs.
#4575100
#4575125
#4575150
#4575175
#4575200
#4575225
#4575250
#4575275
#4575300
1” width . . .
1-1/4” width
1-1/2” width
1-3/4” width
2” width . . .
2-1/4” width
2-1/2” width
2-3/4” width
3” width . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 17.95
$ 18.95
$ 19.95
$ 21.95
$ 24.95
$ 27.95
$ 31.95
$ 33.95
$ 35.95
Please Note:
Monday - Friday
6
Antique Base Moldings
4579405
4579416
#4579416
11/16” x 4-1/2”, Base molding . . . . . . . . . . . . . $ 97.95
#4579405
3/4” x 3”, Casing molding . . . . . . . . . . . . . . . . $ 84.95
Antique Base Moldings - Variable Width
4579411
These patterns will cut a decorative channel in your material. Therefore, you can
make your molding as wide as you want.
3-3/8”
#4579411
11/16” x 4”, Casing molding . . . . . . . . . . . . . . $ 94.95
4579414
#457ANT-3
3/4” x Variable Width . . . . . . . . . . . . . . . . . . . $ 110.95
2-5/16”
#4579414
5/8” x 4”, Base molding . . . . . . . . . . . . . . . . . . $ 94.95
#457ANT-4
3/4” x Variable Width . . . . . . . . . . . . . . . . . . . . $ 99.95
4579409
2-1/8”
#4579409
5/8” x 3-1/2”, Base molding . . . . . . . . . . . . . . . $ 88.95
#457ANT-1
3/4” x Variable Width . . . . . . . . . . . . . . . . . . . . $ 99.95
4579412
3-3/4”
#4579412
3/4” x 3-1/2”, Casing molding . . . . . . . . . . . . . $ 88.95
#457ANT-2
3/4” x Variable Width . . . . . . . . . . . . . . . . . . . $ 110.95
4579410
2-5/16”
#4579410
5/8” x 3-1/2”, Base molding . . . . . . . . . . . . . . . $ 88.95
4579408
#4579506
3/4” x Variable Width . . . . . . . . . . . . . . . . . . . . $ 94.95
2-1/8”
#4579408
11/16” x 3-1/4”, Base molding . . . . . . . . . . . . . $ 77.95
4579417
#4579512
#4579417
3/4” x Variable Width . . . . . . . . . . . . . . . . . . . . $ 94.95
3/4” x 3”, Casing molding . . . . . . . . . . . . . . . . $ 84.95
2-1/2”
4579403
#4579403
7/16” x 3”, Base molding . . . . . . . . . . . . . . . . . $ 84.95
Please Note: Profiles shown are NOT to scale
7
#4579529
3/4” x Variable Width . . . . . . . . . . . . . . . . . . . . $ 99.95
Monday - Friday
Call for Prices
Belsaw Molding Knives
Modified Casing & Base Moldings
Antique Moldings - Variable Width Casing Patterns
Many of our customers have requested that we expand our casing and base molding
selection with larger and/or smaller versions of existing standard profiles. Generally
used as trim for doors, windows and baseboards. Many older homes used these
moldings around double hung windows, and to trim wood framed doorways between
homes.
This profile was designed to compliment the decorative plinth or rosette blocks
around doorways and windows. This pattern will cut a decorative channel in your
material. Therefore, you can make your molding as wide as you want.
Many of our customers have requested that we offer a line of antique profiles often
found in homes constructed in the latter half of the nineteenth century. All of the
profiles shown here were commonly used. We will continue to expand our selection
of antique patterns in the coming years as their popularity dictates.
3-5/8”
#457BS-2
3/4” x 5-1/4” . . . . . . . . . . . . . . . . . . . . . . . . . $ 108.95
4579516
#4579516
#4577040
3-5/8” x Variable width . . . . . . . . . . . . . . . . . . $ 107.95
3-3/8”
3/4” x 5” . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 96.95
4579517
#4579517
#457BS-4
3-3/8” x Variable width . . . . . . . . . . . . . . . . . . $ 104.95
5/8” x 4-1/4” . . . . . . . . . . . . . . . . . . . . . . . . . $ 95.95
3-7/8”
4579508
#457CS-1
11/16” x 2-1/2” . . . . . . . . . . . . . . . . . . . . . . . $ 73.95
#4579508
3-7/8” x Variable width . . . . . . . . . . . . . . . . . . $ 110.95
2-1/4”
457074C
#457BS-1
3/4” x 3” . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 83.95
#457074C
2-1/4” x Variable width . . . . . . . . . . . . . . . . . . . $ 94.95
2-1/2”
#457BS-3
3/4” x 3” . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 83.95
457076C
#457076C
#457BS-5
3/8” x 3-1/4” . . . . . . . . . . . . . . . . . . . . . . . . . $ 75.95
#4574450
3/4” x 3-1/4” . . . . . . . . . . . . . . . . . . . . . . . . . $ 88.95
2-1/2” x Variable width . . . . . . . . . . . . . . . . . . . $ 94.95
See our selection of
Rosette Knives
on page 33
Please Note:
Monday - Friday
8
Antique Batten & Panel Moldings
Many of our customers have requested that we offer a line of antique profiles often
found in homes constructed in the latter half of the nineteenth century. All of the
profiles shown here were commonly used. We will continue to expand our selection
of antique patterns in the coming years as their popularity dictates.
Batten and panel moldings are very versatile since they can be used in a number
of different applications. Use them as a decorative chair rail, as a cap for wainscot,
door and window trim, or to cover the seam on paneled walls.
4579413
#4579413
3/4” x 3-1/2” Beaded casing molding . . . . . . . . $ 88.95
4579527
#4579527
4579525
3/4” x 5”, Antique casing molding . . . . . . . . . $ 122.95
#4579525
3/4” x 3-1/4”, Antique Batten molding . . . . . . $ 104.95
4570BAT-3
4579502
#4570BAT-3
3/4” x 4-3/8”, Batten molding . . . . . . . . . . . . $ 102.95
#4579502
3/4” x 3-1/4”, Panel molding . . . . . . . . . . . . . $ 102.95
4570BAT-2
4579513
#4570BAT-2
3/4” x 4”, 5-Flute molding . . . . . . . . . . . . . . . $ 110.95
#4579513
3/4” x 3-1/4”, Casing molding . . . . . . . . . . . . $ 102.95
457ANT-6
4579500
#457ANT-6
3/4” x 4”, Antique pattern molding . . . . . . . . . $ 104.95
#4579500
3/4” x 3-1/4”, Beading molding . . . . . . . . . . . $ 102.95
4579532
#4579532
457ANT-5
3/4” x 4”, Casing pattern . . . . . . . . . . . . . . . . . $ 94.95
#457ANT-5
3/4” x 3-1/4”, Antique molding . . . . . . . . . . . . $ 94.95
4570BAT-1
#4570BAT-1
4579505
3/4” x 4”, Batten molding . . . . . . . . . . . . . . . $110.95
#4579505
3/4” x 3-1/4”, Batten molding . . . . . . . . . . . . . $ 99.95
4579504
4579511
#4579504
3/4” x 3-1/2” Antique casing molding . . . . . . . $ 104.95
Please Note:
9
#4579511
1/2” x 2-3/4”, Beaded panel molding . . . . . . . . $ 99.95
Monday - Friday
Call for PricesBelsaw Molding Knives
Modified Casing & Base Moldings
4570MUL-2
#4570MUL-2
4570MUL-1
#4570MUL-1
11/16” x 2-3/4”, Mullion molding . . . . . . $ 102.95
11/16” x 1-1/2”
4579510
#4579510
5/8” x 2-1/2”, Batten molding . . . . . . . . . . . . . $ 99.95
3/4” x 2-1/2”, Panel molding . . . . . . . . . . $ 99.95
1/2” x 1-1/2”
#4579430
$ 72.95
#4579518
$ 72.95
#4579415
3/4” x 2-1/2” . . . . . . . . $ 73.95
#4579407
3/4” x 2-1/4” . . . . $ 63.95
#4579428
3/4” x 2-1/8” . . . . . . . . $ 77.95
#4579404
3/4” x 2-9/16” . . . . . . . $ 73.95
#4579429
3/4” x 1-1/2” . . . . $ 72.95
#4579418
3/4” x 2-9/16” . . . . . . . $ 73.95
#4579402
11/16” x 2-7/16” . . . . . $ 73.95
#4579401
11/16” x 2” . . . . . . $ 66.95
#457CS-2
3/4” x 2-3/8” . . . . . . . . $ 73.95
Standard Astragal Molding
Round Over Knives
This very versatile molding is often used as a
door stop, or to cover the seam where panels
are jointed together.
These double cut knives produce two different radii. Great for cutting slats for outdoor furniture projects.
#4579980
WP998 (11/16” x 1-3/4”) . . . . . . . . . . . . . . .$ 58.95
1/8” & 5/32”
Radius Knife
#4579520
Brick Molding
A thick molding providing a surface for
brick or other siding to butt against.
This design allows a brick molding up to
2” wide x 1-1/4” thick to be produced.
Order #
4571800
Dimensions
2” x 1-1/4”
Please Note:
5/16” & 3/8”
Radius Knife
#4579522
Price
$ 72.95
#4579520
#4579521
#4579522
#457RAD-SET
1/4” & 3/16”
Radius Knife
#4579521
Set of three knives will produce a
total of 6 different radii. Order by
part number 457RAD-SET
1/8” & 5/32” Radius knife . . . . . . . . . . . . . . .$ 62.95
1/4” & 3/16” Radius knife . . . . . . . . . . . . . . .$ 62.95
5/16” & 3/8” Radius knife . . . . . . . . . . . . . . .$ 62.95
3-Piece Radius knife set . . . . . . . . . . . . . . . .$ 165.95
Monday - Friday
10
Standard Picture Moldings
Decorative Hand Rail
Moldings
This profile is used to support hooks for picture
frames. Installed around the perimeter of a room
approximately 1-1/2” below the ceiling line.
273
276
4570HR-4
4570HR-1
4570HR-3
Order #
4570273
4570276
Profile #
WP273
WP276
Size
11/16” x 1-3/4”
11/16” x 1-3/4”
Price
$ 92.95
$ 92.95
4570HR-2
Half Round / Dowel Moldings
This half circle molding profile is often used
as a screen molding, bead molding, shelf
edging or a panel molding. By running the
half molding twice through your planer/molder, you will also be able to create full round
dowels in the most popular sizes.
Order #
4574012
4574022
4574032
4574042
4574152
4574052
4574062
Diameter
1/2”
5/8”
3/4”
7/8”
1”
1-3/8”
1-1/2”
Cut Qty
2-up
2-up
2-up
2-up
2-up
2-up
2-up
Price
$ 53.95
$ 53.95
$ 57.95
$ 59.95
$ 59.95
$ 66.95
$ 66.95
In a colonial style home, the staircase was very often the focal point of the dwelling.
Master craftsmen took great pride in their ability to construct beautiful wooden stair
cases. The decorative handrail was meant to compliment the ornate newel posts
and spindles.
Order #
4570HR-1
4570HR-2
4570HR-3
4570HR-4
Size
4-3/16” x 3”
2-1/2” x 2-1/4”
3” x 2-1/4”
2-3/4” x 2-1/2”
Price
$ 155.95
$ 133.95
$ 138.95
$ 138.95
Log Cabin Siding Molding
Louver Molding
Many of our customers are making wooden shutters for high-end
homes built in the southern
states. This new pattern will
allow you to accurately produce wooden slats so you can make your own. The top
knife cuts the profile, and the bottom knife will cut a groove channel to be used as
your lower guide for milling. Finished slat size measures 5/8” x 2-1/2”.
Order #
4579514-T
4579514-P
4579514-S
Profile
Top Knife
Bottom Knife
2-Piece Set
Price
$ 75.95
$ 75.95
$ 133.95
Tear Drop Siding Molding
Exposure
Add a rustic look to your building projects with our log cabin siding knife. Available
in either 5” or 6” exposure. You determine the thickness.
Order #
457LC-5
457LC-6
Exposure
5”
6”
Price
$ 155.95
$ 166.95
Bar Rail Molding
This popular pattern is similar to standard clap board siding but adds a decorative
element through the gentle rounding of the overlap. This siding can be simply
butted together, or you could add a rabbet to one edge of a true overlap. Also very
popular when used in family rooms and dens when milled from knotty pine.
#4579406
3/4” x 5” Dimension . . . . . . . . . . . . . . . . . . .$ 99.95
Perfect for the rec room and other wet bar applications. Gentle sweeping curves with
a unique detail makes this a very popular profile. Sold as a two knife set.
Order #
457BR-1
Exposure
2” x 5-1/2”
Please Note:
11
Monday - Friday
Price
$ 164.95
Rabbet Knife Sets
Wedge Tongue & Groove
Molding
Rabbet Knives are 1” wide. You specify depth of
cut. Ask for additional depth of cut rabbet knives.
1”
1”
1”
1”
1”
1”
#4575502
#4575505
#4575506
#4575507
#4575508
#4575510
x
x
x
x
x
x
1/4” .
3/8” .
7/16”
1/2” .
5/8” .
3/4” .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.$ 25.95
.$ 25.95
.$ 33.95
.$ 25.95
.$ 33.95
.$ 25.95
V-Groove Bead Molding
#4575391
#4575389
#4575390
For 5/8” to 1” stock . . . . . . . . . . . . . . . . . . .$ 99.95
For 2” stock . . . . . . . . . . . . . . . . . . . . . . . .$ 110.95
For 2” stock with V-Groove . . . . . . . . . . . . . .$ 133.95
Paneling Tongue &
Groove Molding
Use this pattern to add a decorative V-Groove bead
to your moldings. Available in single and double
bead configurations. Bead measured 1/4” across,
depth of cut is 1/4” and there is a 1/16” spacing
between beads on double cut profile.
Single Bead . . . . . . . . . . . . . . . . . . . . . . . . . .$ 54.95
Double Bead . . . . . . . . . . . . . . . . . . . . . . . . .$ 65.95
#457VB-1
#457VB-2
A very versatile profile for making flooring and
paneling. Available in two different thickness
capacities.
A very popular molding for wall and ceiling
paneling. This knife produces paneling from
5/8” to 1” thick. Widths can be varied
according to your needs.
#4575388
Paneling Tongue & Groove . . . . . . . . . . . . . . . .$ 99.95
Picture Frame Moldings
Picture frame moldings have increased in popularity over the years and our pattern selection is one of the best available. These can be used in many different configurations
and combinations to develop a very unique finished product. If you would like us to manufacture a pattern to your unique specifications, please don’t hesitate to contact us
for a free quotation. Please note the finished dimensions below. Art not shown to scale.
#4574201
#4574200
1-1/2” x 7/8” 1-1/8” x 7/8”
$ 59.95
$ 59.95
#4574202
#4574203
#4574204
#4574205
#4574206
#4574207
2” x 7/8”
$ 69.95
7/8” x 7/8”
$ 59.95
1-1/4” x 3/4”
$ 62.95
1-1/8” x 3/4”
$ 62.95
1-1/8” x 3/4”
$ 62.95
2” x 3/4”
$ 69.95
2-1/8” x 7/8”
Top & Bottom
knife
dimensions
#4574208
1-1/2” x 7/8”
$ 66.95
#4574209
Top
#4574210
Bottom
$ 69.95 each
#4574215
#4574211
7/16” x 1/2”
$ 62.95
2-3/8” x 3/4”
$ 73.95
#4574212
1-1/16” x 1-1/4”
$ 62.95
#4574213
#4574214
1-1/16” x 15/16”
$ 65.95
1-5/16” x 3/4”
$ 65.95
#4574216
#4574217
#4574218
#4574219
#4574221
1-1/16” x 1-3/8”
$ 62.95
3-9/16” x 1-1/8”
$ 88.95
1” x 1/2”
$ 62.95
2-1/8” x 1-1/4”
$ 69.95
7/8” x 1-13/16”
$ 68.95
#4574222
#4574226
#4574220
#4574224
#4574225
#4574223
3/4” x 1-5/8”
$ 68.95
7/8” x 1-1/2”
$ 68.95
1” x 2”
$ 69.95
1-1/8” x 1-7/16”
$ 68.95
7/8” x 1-1/4”
$ 68.95
7/8” x 1-7/8”
$ 68.95
Monday - Friday
12
Planer / Molders
Williams & Hussey Planer / Molder Package
• Produces Restoration Moldings,
Straight Moldings, Round Top Moldings,
Elliptical Moldings (with optional jig),
Casings, Crowns, Base Caps, Chair Rails,
Astragals, Raised Panels , and more!
• 2 knife cutterhead
• 2 HP, 1 phase, 110/220V motor
• Feed rate: 15 FPM
• Planes 7” wide
• 8” max stock thickness
• 9” min stock length
• Weight: 220 lbs.
Williams & Hussey Molding Profiles
W&H supplies just about any
molding knives you need. Need
special knives? Just send us an
accurate tracing or a sample of
the molding you wish to duplicate
–they will be ground for you!
(Two knives per profile)
5/8” Beaded Casing
• This package includes 2HP motor,
welded steel stand with support rollers
and casters, dust hood with 4” outlet
and switch.
3/4”x3-1/4” Crown Molding
3/4”x2-1/2” Bed & Cove
5/8”x2”
Window/Door
Stop
3/8”x1-1/4” Roughing
5/8” Raised Panel
3/4”x4-1/4” Casing
#W&H-PK
$ 1,968.00
5/8” Multi-Bead Casing
1-1/8” Backout
Casing Knives
1/2” Knotty Pine Paneling
11/16”x1-1/8” Base Cap
Optional Elliptical Jig
3/4” Raised Panel
Maximum profile width 6-1/2”
11/16”x2-1/2” Casing
#EJ92 . . . . . . . . . . . . $ 587.00
Optional Accessories
Oak table guides . . . . . . . . . . . . . . . . . . . . . . . . $ 21.00
#54-304
Replacement planer knife set . . . . . . . . . . . . . . $ 93.00
#54-41
Jet 13” Closed Stand Planer / Molder
• 1-1/2 HP, 1 phase,
115/230V motor
• Feed rate - planing: 20 FPM
• Feed rate - molding: 10 FPM
• 6-1/8” max planing thickness
• 14” min planing length
$ 969.00
13
Cutterhead Speed: 7,000 R.P.M.
Feed Rate: 15 F.P.M.
Maximum Planing Width: 7"
Maximum Profile Width: 6-3/4”
Maximum profile depth: 3/4”
Minimum stock length: 9”
Minimum stock thickness: 1/4”
Maximum stock thickness: 8”
Height of bed: 31”
Approx. Shipping weight: 200 lbs.
#W1693
#JPM-13CS
Set of 3 HSS 13” repl knives . . . . . $ 91.00
#JPM13-K
7/16” Beading
Shop Fox Planer / Molder
•
•
•
•
•
•
•
•
•
•
•
Over 40 standard molding cutter
sets are available. Custom made
cutter sets are also available for a wide variety
of applications.
3/4”x3-1/2” Crown Mold
$ 1,150.00
Optional Accessories:
#D3350
Set of 2 HSS 7” replacement knives . . . . . . . . . . .$ 69.95
Monday - Friday
Shop Fox® Molding Knives
Shop Fox Molding Knives
#D3338
$ 89.95
#D3337
$ 89.95
#D3336
$ 79.95
#D3334
$ 59.95
21/
4”
Cr
ow
n
23/
4”
Cr
ow
n
31/
4”
Cr
ow
n
#D3335
$ 59.95
#D3333
$ 49.95
3-1/4” Base
3-1/4” Base
4-1/4” Base
2” Casing
3” Chair Rail
#D3325
$ 39.95
2-1/2” Chair Rail
2-5/8” Chair Rail
d
ea
B
4”
3/
1-
e
ov
C
4”
3/
1-
#D3324
$ 39.95
35/
8”
Cr
ow
n
41/
4”
Cr
ow
n
45/
8”
Cr
ow
n
These High Speed Steel molding knives fit the W1693
Shop Fox Mini Molder/Planer. Each molding profile
includes a set of two indexable knives, so knife setting is
quick and easy. Profiles shown are not to scale.
#D3342
$ 79.95
#D3343
$ 59.95
#D3344
$ 79.95
#D3326
$ 59.95
2-1/4” Casing
#D3327
$ 59.95
#D3339
$ 69.95
#D3341
$ 79.95
#D3340
$ 69.95
#D3332
$ 29.95
3-1/4” Casing
#D3328
$ 79.95
3-1/2” Casing
2” Back Cutter
#D3331
$ 19.95
#D3330
$ 19.95
1-1/2” Back Cutter
1-1/8” Back Cutter
#D3329
$ 89.95
Monday - Friday
14
Table Saws & Accessories
Tenoning Attachments
Shop Fox 10”Table Saw
These jigs give you more adjustments to simplify cutting tenons and
other wood joints on your table saw.
Handles stock up to 3-1/4” thick.
Miter slot bar is adjustable to
ensure a secure table slot fit;
keyed design prevents jig
from tipping over or falling
from table.
• 52” Shop Fox Classic
T-Fence
• LEFT-TILT blade
• One cast iron wing
• Includes extension
table with legs, standard
and dado table inserts
3 HP, 1 phase, 220V motor • #W1677EXT1
5 HP, 1 phase, 220V motor • #W1711EXT
$ 1,350.00
$ 1,499.00
#34-183
#JTG-10
#6284600
#50-050
Delta tenoning attachment . . . . .
Jet tenoning attachment . . . . . . .
Powermatic tenoning attachment
General tenoning attachment . . .
Right Angle Jig
Incra Miter Gauge
The NEW Incra Miter V27 is engineered to provide a high performance, yet low cost upgrade for your
Table Saw, Band Saw, Router
Table, Disk Sander, Belt Sander or
any other tool in need of a better
miter gauge. Like all Incra Miter
Gauges, the V27 delivers extreme miter cutting accuracy through the
advanced combination of Incra’s exclusive AngleLOCK™ indexing system
and its patented Adjustable GlideLOCK™ Miter Bar. Now, the Incra Miter
V27 makes it possible to put an Incra Miter Gauge in EVERY miter channel in your shop!
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 54.95
#MITERV27
#19107
$ 109.95
$ 123.95
$ 124.00
$ 99.00
. . . . . . . . . . . . . . $ 169.95
Optional (shown) 6” vise clamps . . . . . . . . $ 12.95
This wood feather board will keep your stock
tight against the rip fence and down on the
table during ripping operations giving you more
control. Will fit in standard 3/4" wide miter
slots.
#D3096 . . . . . . . . . . . . . . . . . . . . . . $ 11.95
Plastic Feather Board
This essential safety item
keeps hands a safe distance
from blades and cutters while still maintaining control of the workpiece
against machine fences. Measures 13-1/2” overall.
Our plastic featherboard keeps stock up against the
fence on table saws, shapers, router tables, etc.
Fits in standard miter slots.
Push Stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.95
9-in-1 Saw Aid
.
.
.
.
Wood Feather Board
Push Stick
#D3122
.
.
.
.
This amazingly affordable jig is constructed using top quality aluminum
castings and plates which are machined
to exacting tolerances. Cut tenons,
dados, rail ends, and finger joints safely
and with complete accuracy.
#W1500
#W1301
.
.
.
.
Of course it works like (1) a safety push
stick, with a long, narrow hold-down surface. But this tool also works as: (2) a
table saw depth gauge, (3) router depth
gauge, (4) 6” hook rule, (5) 30º/ 60º
angle gauge, (6) 45° angle gauge, (7) 9”
rule, (8) 90º engineers square, (9) center finder. The depth gauges and center
finder are accurate to .005”; engineers
square is accurate to .01”. Heavy-duty,
glass-filled-nylon tool is guaranteed for 5
years against breakage!
9 in 1 Saw Aid . . . . . . . . . . . . . . . . . . . . . . . $ 15.95
#825-1450 . . . . . . . . . . . . . . . . . . . . . . . . $ 8.65
• 26” Shop Fox Classic
T-Fence
• LEFT-TILT blade
• Two cast iron wings
• Includes standard and
dado table inserts
Shown with D2057
Adjustable Mobile Base.
(Not Included)
Safe “V” Shoe
Unique because of a bottom groove
that applies pressure down and in
towards the fence. Made from high
density plastic. Sold per pair.
#825-1100
15
3 HP, 1 phase, 220V motor • #W1677
5 HP, 1 phase, 220V motor • #W1711
$ 1,149.00
$ 1,250.00
. . . . . . . . . . . . $ 3.45
Monday - Friday
Clamping Miter Gauge
This Clamping Miter Gauge is safer
than standard miter gauges. It has
a comfortable D-handle grip, builtin sliding stop, and positive trigger
clamping action. It fits standard
miter gauge slots, 3/8” x 3/4”,
with positive angle stops at 90° and 45° both left and right
side. Bar extends to 12”
• 3 HP, 1 phase,
220V motor
• 50” Standard Shop
Fox Fence
• LEFT-TILT blade
• One cast iron wing
• Includes extension
table with legs, standard
and dado table inserts
#W1323
Jointr’ Clamp
#W1677EXT2
$ 1,395.00
Saw Step Gauge
Here is a simple, inexpensive solution
for precisely putting a straight edge on
any warped or crooked stock, all in one
pass on your table saw without using a
jointer. Will also do shallow taper cuts
with superior control of the stock
#D3119
$ 9.95
Make precision table saw cuts every time
with this step gauge. Just place the step
gauge over the saw blade and raise the blade
until it contact the height you choose.
#19082
Tapering Jig
Cut tapers with ease when using this jig on
your table saw, bandsaw or radial arm saw.
Converts to left or right hand use and is adjustable up to a 15° taper. Very easy to use
and constructed from aluminum.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
Saw Setting Gauge
The beauty of this gauge is that it is a full
3/4” thick ensuring that the teeth are being
gauged at the top of the arc, and it can stand
on its own. Will precisely set any height or
with from 1/8” to 2” in 1/8” increments.
#860-6010
#825-1150
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 38.00
The Zero Clearance concept is simple; the
blade cuts its own perfectly sized slot by
being raised through a machinable
“blank”insert. Inserts are 1/2” thick highdensity phenolic laminate, with bonded laminate surface-offering superior rigidity, flatness, durability, and low friction. User
friendly features include top-accessible leveling screws, lateral adjustment screws for a vibration free fit, rear anti-lift pin
(except JT-1) and a precut blade pocket on bottom that provides clearance for
fully retracted blades and bevel cuts. Instructions included. Use only carbide
tipped blades. Colors may vary.
Delta Universal 13-3/8” x 3-3/4” . . . . . . . . . . . . .
Jet/Powermatic Cont R&L Tilt 12-1/2”x3-9/16” . . .
Jet XACTA Left Tilt 13-5/16” x 3-11/16” . . . . . . . .
Powermatic 66 14-7/16” x 4” . . . . . . . . . . . . . . .
General 350 13-13/16” x 3-1/2” . . . . . . . . . . . . .
Craftsman Saws 14” x 3-3/4” . . . . . . . . . . . . . . . .
Universal Blank Sheet 1/2”x11”x15” . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . $ 20.40
Anti-Kickback Mechanism
Zero Clearance Table Saw Inserts
#DL-1U
#JT-164
#JT-2L
#PM-1
#GE-1
#CR-1
#BK-1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.95
$ 21.95
$ 21.95
$ 22.95
$ 21.95
$ 21.95
$ 21.95
$ 21.95
These safety colored yellow rollers rotate clockwise for table saws and prevent dangerous
kickback. Also maintain even pressure against
the saw table and fence so that ripping long
boards is a very easy operation. If you work
alone, this table saw accessory will really speed
up your ripping operations while providing a
higher degree of safety for the operator.
Optional track makes adjustments a breeze. Sold in pairs.
#W1104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 36.95
Freud 10” Sanding / Calibration Disc
• These Calibration and Sanding Discs
are a real time saver for aligning your
saw.
• Precision machined for absolute balance and flatness
• Mount these in place of your blade
and use the flat surfaces to accurately
align your saw for the best cut
• Apply our self-adhesive sanding disks
and turn your table or radial arm saw
into a disc sander
• Use on table saw or radial arm saws
• Measures 10” x 1/8” x 5/8” arbor
#CD010
#D10080
#D10120
#D10150
#D10XXX
10” Sanding / Calibration Disc . . . . . . . . . . . . . .
5pk 80 Grit self-stick discs . . . . . . . . . . . . . . . .
5pk 120 Grit self-stick discs . . . . . . . . . . . . . . .
5pk 150 Grit self-stick discs . . . . . . . . . . . . . . .
Asst pack, 5ea) 80, 120, 150 grit discs . . . . . . .
Monday - Friday
$ 38.00
$ 24.00
$ 22.40
$ 22.40
$ 49.95
16
Link Belt
Shop Fox 10” Contractor-Style Table Saw
Designed to reduce vibration between the
motor and arbor, these belts are sectionalized so you can quickly make any size belt.
This belt has the same cross section
dimension as standard V-belts and is equivalent to a model A/4L (1/2”) belt.
Resistant to oil, chemicals and high temperatures.
#0418030
#0418130
1/2” x 5’ Link Belt . . . . . . . . . . . . . . $ 39.95
1/2” x 4’ Link Belt . . . . . . . . . . . . . . $ 31.95
• 28” Shop Fox Aluma-Classic T-Fence
• 2 HP, 1 phase, 110/220V motor (prewired to
220V)
• RIGHT-TILT blade
• Two cast iron wings
• Built-in dust hood with
4” outlet
dado table inserts
Glide Tape
Self-lubricating tape easily applies
to fences, jigs, any machine surface. This special UHMW adhesive backed flexible plastic film
has low friction qualities and a
high abrasion resistance.
#19420
#19425
#19430
#W1714
TopSaver Rust Removal and Top Protectant Kit
3/4” width x 6’ length . . . . . . . . . . . $ 4.95
2” width x 6’ length . . . . . . . . . . . . . $ 9.95
3” width x 6’ length . . . . . . . . . . . . . $ 12.95
Finally, a rust removal kit that Really Works! It is a
Rust Remover/Lubricant/Surface Sealant/
Conditioner for metal surfaces. It completely
removes rust and corrosion from the pores of the
metal surface. It reduces sliding friction, eliminates
binding and surface hang-ups on tabletops, repels
moisture and seals the surface pores against
rust and corrosion. Includes 8 ounce
bottle of TopSaver, gloves, abrasive
pads and wiping cloths.
Bostik Lubricant Sprays
Use TopCote to seal table tops and to protect
tools against corrosion. Also minimizes friction,
is anticorrosive and dries rapidly. DriCote
reduces friction thereby lowering cutting temperatures and prolonging tool life. Heat resistant to
550 degrees. Bearing Lube is especially effective on router bit bearings or to lubricate slides
and other height-load parts.
#205801
#205805
#204801
#204805
#209405
10.75 oz TopCote . .
5.5 oz TopCote . . . .
10.75 oz DriCote . . .
5.5 oz DriCote . . . . .
5.5 oz Bearing Lube
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
#TOPSAVER KIT
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 699.00
. $ 13.95
. $ 9.95
. $ 16.40
. $ 9.95
. $ 11.95
Shop Fox 10” Contractor-Style Table Saw
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99
Freud Thin Kerf Carbide Tipped Blades
Freud's “Thin Kerf” carbide tipped blades combine all
the top features of their Industrial blades to give you a
superior finished cut at an extremely affordable price. All
these blades feature Freud's exclusive anti-kickback
shoulder design for greater safety. The thin kerf requires less
cutting power both from you and the saw. Order number,
blade diameter, bore and number of teeth are listed.
Part No.
Dia
Bore
Ripping Blade
TK206
10”
5/8”
Finishing Blade
TK306
10”
5/8”
Fine Cutoff Blades
TK406
10”
5/8”
TK806
10”
5/8”
General Purpose Combination Blade
TK906
10”
5/8”
• 28” Shop Fox Aluma-Classic T-Fence
• 1-1/2 HP, 1 phase, 110/220V motor
• RIGHT-TILT blade
• Two stamped steel
wings
• Built-in dust hood with
4” outlet
dado table inserts
Teeth
Price
24 Flat
$ 28.95
40 Flat
$ 34.25
60 Flat
80 Flat
$ 41.60
$ 55.70
50 Flat
$ 38.95
#W1703
17
$ 650.00
www.belsaw.com
Monday - Friday
Mobile Bases
Shop Fox Mobile Bases
The SHOP FOX Adjustable
Mobile bases are the first
mobile bases designed
strong enough to move
heavy machines on a continual basis, be adjustable
to fit a variety of machines and
be leveled without the use the of
shims or tools. To move the machine, you
reach down and simply turn the knobs on the two plungers counter-clock
wise to allow the weight of the machine to rest on the wheels, and then
move the machine to the new location. To lock and level the machine,
simply turn the plunger knobs clockwise until locked and level. 4
Heavy-Duty 3" Industrial Grade Casters - 2 ball bearing swivel and 2 stationary. Engineered with heavy-duty steel (up to 1/4" thick) for exceptional strength
Mini Mobile Base
Adjusts from 10 -1/2" x 14 -1/2" to 17" x 21 -1/2" to fit most machines
A substantial 600 lb. capacity to easily handle most of the popular
machines.
#D2260
Mini mobile base . . . . . . . . . . . . . . . . . . . . . . . $ 65.95
Heavy-Duty Mobile Base
Adjusts from 19" x 20 -1/2" to 29 -1/2" x 29 -1/2" to fit most machines
A substantial 700 lb. capacity to easily handle most of the popular
machines.
#D2057
Heavy-duty mobile base . . . . . . . . . . . . . . . . . . $ 66.95
Super Heavy-Duty Mobile Base
Adjusts from 18" x 24-1/2" to 28-1/2" x 33-1/2" to fit most machines
A massive 1300 lb. capacity to handle some of the heaviest machines
made.
#D2058
Super Heavy-duty mobile base . . . . . . . . . . . . . $ 85.00
Extension Kit for the D2260 and D2057
Mobile Bases
This Kit easily bolts on to
Models D2260 and
D2057 to provide support
for an extension table or
similar device. Makes the
whole machine and extension able to move as one
unit. Adjustable for length
(up to 44") as well as front
to back.
#D2259
Rated “Best Buy” by the popular woodworking magazines for its superior
stability, mobility and capacity for the price
• Heavy duty steel
• Strong 3" wheels two swivel and two fixed casters
• Each swivel caster has a foot pedal that
raises and lowers the base with little effort
• Rubber leveling feet
• Adjustment in 1" increments
• 500 lbs. capacity
• Adjusts from 11" x 11" to 35" x 35" to fit most machines
#50-025
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.00
Delta Universal Mobile Base
With this set of brackets, you can custom
make a mobile base exactly sized for your
equipment. Simply cut hardwood rails (not
supplied) to fit in the corner brackets.
Three casters provide superior mobility and
a locking foot pedal locks the base firmly in
place. Will handle machinery up to 300 pounds.
Sold per set to make up one mobile base.
#50-345
. . . . . . . . . . . . . . . . . . . . . . . . $ 56.50
Jet Universal Mobile Base
Can be configured to fit a wide range of
machinery sizes with weights under 600
pounds. Two fixed and two swivel castors
make for easy maneuverability. Exceedingly
strong, very stable, yet light in weight with a
unique spring pin design for quick snap adjustment. No tools are needed for
assembly or to make size adjustments.
• Adjusts from 18" x 18" to 28" x 28"
• Quick snap adjustment -no tools needed
• Castors lock in position
#708118
Universal mobile base . . . . . . . . . . . . . . . . . . . . $ 59.95
Jet Industrial-Duty Universal
Mobile Base
Extension kit . . . . . . . . . . . . . . . . . . . . . . . . . . $ 59.95
36” Extension Bars for the D2058 Mobile Base
These 36” extension bars replace the standard length side rails on the D2058 heavyduty mobile base. This allows the base to be
assembled with a minimum capacity of
18”x34” to a maximum capacity of
33-1/2”x44”.
#D2246
General International Mobile Base
. . . . . . . . . . . . . . . . . . $ 26.50
Extension
Bars
Designed for larger and heavier machines.
Features the quick snap feature so you
don’t need any tools to set up or make size
adjustments. With just a 1/2” clearance,
the center of gravity stays close to the floor. Also available are extension bars
to extend the length of the mobile base for lathes and other machines with
long and narrow footprints. You can also attach the #708158 extension kit
to the mobile base so the base will extend and fit under cabinet saws that
have extended rails and tables up to 60” long.
• Up to 1,200 lb. capacity
• Adjusts from 24" x 24" to 34" x 34"
• Quick snap adjustment
#708119
#708110
#708116
#708117
#708158
Industrial-duty mobile base
18” Extension rail . . . . . .
Extension Kit . . . . . . . . . .
Monday - Friday
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 79.95
$ 11.95
$ 16.95
$ 19.95
$ 69.95
18
Magic Molder™
The Magic Molder
Magic Molder Fence
The Magic Molder Fence allows the user to
expose a small portion of a plug without cutting
into their tables fence. Equipped with two brackets
which will fit all fences except the Delta Unifence.
The Magic Molder Fence also has four tapped
screws which are designed to accommodate templates for arch-moldings.
Convert your table saw into a molder!
• Ideal for making short runs and creating
“custom” moldings on both natural and composite materials
• Unique design allows the universal head to
be anti-kickback with any profile
• Chip limiting design produces smooth, vibration-free cuts
• 7” diameter head with 5/8” diameter bore
#MM-F
$ 155.00
Magic Molder Plugs (sold per pair)
Magic Molder Promotional Set
Includes the following:
• Magic molder head
• Your choice of any ONE pair of magic molder plugs
1/4”R
Head . . . . . . . . . . . . . . . . . $ 89.95
#PR-MM
PLUS
One plug set . . . . . . . . . . . . $ 95.00
(please specify)
1”
= $ 184.95 / Set
Magic Molder Starter Set
45°
#P1
• Magic Molder head
• P37 & P65 Magic Molder plug sets
$ 95.00
#P3
$ 95.00
5/16”R
1/8”R
.375”
.25”
#P11
P65
P37
Magic Molder
Advanced Starter Set
$ 95.00
#P12
$ 95.00
.313”
• Magic Molder head
• P37 & P65 plugs as above Starter
Set, but also P58 & P64 Magic Molder
plugs
#P14
#P13
1/4”R
3/16”R
P37
1/8”R
.125”
1/4”R
.313”
$ 269.95
$ 95.00
.25”
1/8”R
#STARTER-SET
#P10
3/8”R
.188”
3/16”R
.125”
.063”
.25”
.5”
$ 95.00
$ 95.00
5/16”R
.188”
.25”
#P15
$ 95.00
#P16
$ 95.00
5/8”R
.625”
3/8”R
3/16”R
.104”
1/2”R
7/16”R
3/8”R
3/4”R
.125”
.25”
.375”
P64
P58
P65
#ADV-STARTER-SET
19
$ 469.95
#P17
$ 95.00
#P18
$ 95.00
#P19
Monday - Friday
$ 95.00
Magic Molder™
Magic Molder Plugs - continued
(sold per pair)
3/4” wide
material
.375”
#P20
$ 95.00
.643”
3/16”R
.313”
3/32”R
1/8”R
.406”
#P21
#P20-3/16 $ 95.00
$ 95.00
1/2”R
.713”
.062”
1/8”R
#P43
.062”
3/16”R
$ 95.00
#P45
$ 95.00
#P46
$ 95.00
1/2” wide
material
1/4”R
.5”
5/16”R
5/16”R
.187”
.188”
.25”
5/16”R
#P22
$ 95.00
#P23
$ 95.00
#P28
$ 95.00
5/32”R
3/8”R
3/8”R
#P29
#P31
.843”
9/64”R
.094”
.281”
$ 95.00
$ 95.00
.312”
5/32”R
#P32
5/32”R
.125”
.125”
#P60
$ 95.00
.063”
$ 95.00
#P35
$ 95.00
1/4”R
#P66
$ 95.00
$ 95.00
$ 95.00
.156”
.156”
#P40
3/32”R
#P42
7/16”R
$ 95.00
.656”
9/64”R
3/16”R
9/64”R
7/32”R
#P67
$ 95.00
#P68
$ 95.00
.78”
.343”
1/8”R
#P63
7/32”R
7/32”R
.765”
3/32”R
$ 95.00
1/8”R
1/8”R
.094”
.063”
45°
#P38
#P37
.565”
1/4”R
.125”
$ 95.00
$ 95.00
.658”
.422”
45°
#P34
#P62
3/16”R
.125”
#P59
5/32”R
.143”
7/16”R
3/16”R
$ 95.00
$ 95.00
7/32”R
3/8”R
7/32”R
.75”
5/32”R
1/8”R
11/16”R
#P57
.891”
1/2”R
1/2”R
$ 95.00
#P48
.658”
.5”
.5”
.076”
.375”
5/16”R
.891”
9/16”R
.187”
1/8”R
3/16”R
3/4”R
7/64”R
7/64”R
3/16”R
$ 95.00
#P69
$ 95.00
#P70
$ 95.00
Monday - Friday
20
Band Saws & Accessories
Band Saw Blades
Shop Fox 14” Band Saw
Flex back premium band saw blades. 93-1/2” length fits all 14” Delta
and Rockwell models, 14” Jet, and most other 14” models WITHOUT
height attachment. 105” length fits all 14” Delta and Rockwell models,
14” Jet, and most other 14” models WITH height attachment.
• 6” height capacity
• 1/8” to 3/4” blade width
• 93-1/2” blade length
• 4” dust port
• Blade speeds: 1,500 & 3,200 FPM
• Includes miter gauge and rip fence for
resawing and ripping
• Weight: 256 lbs
#W1706
$ 590.00
#D3348
Riser block, increases to 12” under the guide.
Must use 105” blades . . . . . . . . . . . . . . .$ 79.95
Circle Cutting Attachment
Attaches to most band saws with 3/8” x 3/4”
miter grooves to provide professional circle cutting capability. Cut perfect circles from 3” to
50” in diameter. Features all-metal construction, sturdy support leg, and extension wings for
extra support of large diameter circles.
#28-197
Width
1/8”
3/16”
3/16”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
3/4”
3/16”
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
1/2”
3/4”
Teeth
Per Inch
14
4
10
4
6
10
14
4
6
10
3
6
10
14
3
4
4
14
4
6
3
6
10
3
Length
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
93-1/2”
105”
105”
105”
105”
105”
105”
105”
105”
105”
Style
Reg
Skip
Reg
Skip
Skip
Reg
Reg
Skip
Hook
Reg
Skip
Hook
Reg
Reg
Hook
Skip
Skip
Reg
Skip
Hook
Skip
Hook
Reg
Hook
Mfg
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Olson
Price
$ 14.95
$ 11.95
$ 11.95
$ 11.95
$ 11.95
$ 11.95
$ 11.95
$ 11.95
$ 11.95
$ 11.95
$ 11.95
$ 11.95
$ 11.95
$ 11.95
$ 17.95
$ 12.95
$ 11.95
$ 11.75
$ 12.95
$ 12.25
$ 12.95
$ 12.50
$ 13.95
$ 18.95
Shop Fox 17” Band Saw
Circle cutting attachment . . . . . . . . . . . . . . . . . . . $ 99.50
• 2 HP, 1 phase, 220V motor
• 12” height capacity
• 1/8” to 1” blade width
• 132” blade length
• Two 4” dust ports
• Blade speeds: 1,600 & 3,300 FPM
• Includes miter gauge and rip fence for
resawing and ripping
• Weight: 409 lbs
Shop Fox 4” x 6” 3-Speed
Horizontal Band Saw
• 3/4 HP, 1 phase, 110V
motor
• Round capacity @ 90°:
4-1/2”
• Rectangular capacity @
90°: 4” x 6”
• Blade speeds: 78, 108
and 180 FPM
• Blade size: 64-1/2”
• Automatic shutoff after
cut
• Includes vertical cutting attachment
#W1707
$ 999.00
* Call for our selection of blades for this machine
Magnetic Work Light
#W1715
$ 229.00
1/2” x 64-1/2” 14 tooth blade . . . . . $ 12.25
#HB71764
1/2” x 64-1/2” 18 tooth blade . . . . . $ 12.25
#HB71864
21
Part
No.
#FB08593
#FB10493
#FB10093
#FB14393
#FB14593
#FB14793
#FB14893
#FB19293
#FB19493
#FB19693
#FB23093
#FB23493
#FB23693
#FB23793
#TK26393
#FB10405
#FB14305
#FB14805DB
#FB19205
#FB19405
#FB23005
#FB23405DB
#FB23605
#TK26305
Illuminate your work! The powerful magnetic base
adheres to any steel surface providing extra light in hardto-reach work areas. Features include a flexible 14” arm
and an extra-long 8’ cord. Uses up to a 50-watt track
light bulb (not included).
#25-869
Magnetic work light . . . . . . . . . . . . . . . . . . . . . . . . . . $ 20.10
Monday - Friday
Shapers • Scroll Saw
Shop Fox 3 HP Shaper
Shop Fox 16”VS Scroll Saw
• 1/8 HP, 1 phase, 110V motor
• Variable speed: 550 to
1,700 strokes per minute
• 16” throat capacity
• 2” maximum working
thickness
• 3/4” stroke length
• Tilting table
• Includes gooseneck
work light, dust blower
and dust port
• Weight: 31 lbs.
• Reversing
• 2 spindle speeds: 7,000 &
10,000 RPM
• 1/2”, 3/4” & 1” interchangeable
spindles
• 3” spindle travel
• 30-1/2” x 28-1/4” table
• Miter slot
• 3” dust chute outlet
• Includes miter gauge
#W1702
$ 1,099.00
#W1713
$ 150.00
* Call for our selection of blades for this machine
Hold-Down Device
These Board Buddies
are made from diecast aluminum and
feature non-marring
green neoprene rubber
wheels. Because the
wheels turn in both
directions, they function as hold-downs
rather than anti-kickback devices. Mounts to fences 3” to 3-1/2” high x 1” or
wider. Use optional mounting tracks for mobility along fence.
#W1105
#W1107
#W1108
• 14,000 RPM
• 1/2” spindle
• 3/4” spindle travel
• 24-1/4” x 19” table
• Miter slot
• Includes 1/4” and 1/2” router bit
adapters & miter gauge
Hold-down device . . . . . . . . . . . . . . . $ 36.95
12” optional mounting track . . . . . . . . $ 11.95
24” optional mounting track . . . . . . . $ 18.95
#W1701
Right Angle Jig
This amazingly affordable jig is
constructed using top quality
aluminum castings and plates
which are machined to exacting tolerances. Cut tenons,
dados, rail ends, and finger
joints safely and with complete accuracy.
#W1500
Right Angle Jig . . . . . . . . . . . . . . . . . . $ 169.95
#W1301
Optional (shown) 6” vise clamps . . . . . . $ 12.95
Delta Sliding Shaper Jig
Provides greater accuracy during a
variety of shaping operations.
Features 3 guide bar locations for
positioning the workpiece as close
as possible to both large and small
diameter shaper cutters. Fits standard 3/8” X
3/4” miter gage grooves.
#43-188
Sliding Shaper Jig . . . . . . . . . . . . . . . $ 125.95
$ 345.00
•
•
•
•
•
•
•
•
•
2 HP, 1 phase, 110/220V motor
Reversing
Two spindle speeds: 7,000 & 10,000 RPM
Spindles: 1/2" and 3/4" (Included)
Spindle Travel: 3"
Table Size: 24" Wide x 21" Deep
3” dust chute outlet
Heavy-Duty Miter Gauge
Weight: 293 lbs.
Shown with D2057
Adjustable Mobile Base.
(Not Included)
#W1674
$ 680.00
#D3124
#D3080
23” x 40” Extension table . . . . . . . . . . . . . . . . .$ 159.95
1/4” & 1/2” Router bit spindle . . . . . . . . . . . . . . .$ 49.95
Monday - Friday
22
Planers & Accessories
Mini Planer Pal Knife
Setting Jig
Shop Fox 20” Planer
•
•
•
•
•
•
•
•
•
•
•
5HP, 1 phase, 220V motor
Magnetic Safety Switch
Feed Rates: 18 & 23 F.P.M.
Cutting Width: 20"
Cutting Height: 8"
Max. Depth of Cut: 1/8"
Cutterhead Diameter: 3-3/16"
4 H.S.S. Knives
Anti-Kickback design
This gauge is designed to quickly set
up planer knives to a tolerance on
±.001" on standard 1-7/8" diameter
cutterheads. Set your knives
perfectly every time. Sold in pairs
#W1226
#W1683
$ 1,595.00
Same as above but with Spiral
Cutterhead • #W1718
$ 2,995.00
#D3097
#D3349
Set of 4 HSS 20” replacement knives . . . . . . . . .$ 109.95
10-pack Repl carbide inserts for Spiral Cutterhead . .$ 36.50
Mini planer pal . . . . . . . . . . . . . . . . . . $ 29.95
Planer Pal Knife Setting Jig
This patented knife setting system
lets you set planer knives in perfect
alignment every time. It also allows
you to shift nicked knives in
2-1/2" to 4" cutterheads to get a
perfect cut with accuracy of ±.002".
Two jigs are needed for 15" to 20"
planers. Three jigs for planers over 20"
#W1214
#W1216
Single planer pal jig . . . . . . . . . . . . . $ 79.95
Set of two planer pal jigs . . . . . . . . . . $ 159.95
Thickness Gauge
This easy to use thickness
gauge will provide lumber
thickness readings in seconds.
Measures from 0” to 2” in
1/32” increments. Use it to
calibrate your planer thickness
gauge, measure lumber thickness, molding widths, etc.
#19111
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
•
•
•
•
•
•
•
•
•
•
Magnetic Safety Switch
Feed Rates: 16 & 20 F.P.M.
Cutting Width: 14-7/8"
Cutting Height: 6-1/8"
Max. Depth of Cut: 1/8"
Cutterhead Diameter: 3"
3 H.S.S. Knives
Shop Fox 15” Planer with
Spiral Cutterhead
#W1692
• Spiral cutterhead
• 2 Feed speeds: 16 & 20 FPM
• 6” max planing thickness
• Includes closed stand with
extension rollers
$ 1,199.00
#D3301
Set of 3 HSS 15” replacement knives . . . . . . . . . .$ 69.95
Heavy Duty 5-Roller Stand
For greater work stability and support, this 5 roller
stand features large diameter ball bearing rollers
mounted on a sturdy adjustable pedestal base.
Adjusts in height from 26-1/2" to 45". 15-7/8"
wide ball bearing rollers. 250 lb. capacity.
#W1724
$ 999.00
#D2274
5-roller stand . . . . . . . . . . . . . . . . . . . . . . $ 69.95
#X1724131
23
Set of 3 15” spiral repl knives . . . . . $ 65.00
Monday - Friday
Planers & Accessories
Flexible / Extending Roller Stand
• Adjustable height from 26-1/4” to
37”
• 9 Nickel plated rollers (1-1/2” x
20”)
• Maximum extending length: 51”
• Compacted length: 16-1/2”
• 4” wheels with brakes
• Loading capacity of 300 lbs.
#50-167
Flexible roller stand . . . . . . . . . . . . . . . . . $ 219.00
• 2 Feed speeds: 16 & 20 FPM
• Includes open stand with
extension rollers
Heavy Duty 9-Roller Table
Use this versatile roller table wherever
you need extra workpiece support.
Features all-steel welded construction
and measures 19" wide x 65" long.
Comes with 9 ball bearing rollers and
has four independently adjustable legs for
any leveling requirement. Adjustable in height
from 26-3/8" to 44-1/8". 1,000 lb. capacity.
#D2271
#W1723
Set of 3 15” replacement knives . . . . . . . . . . . . . .$ 48.00
#X1723123
Single Roller Stand
9-roller stand . . . . . . . . . . . . . . . . . . . . . $ 149.95
Tilting Roller Stand
Adjustable from 26-1/2" to 45" high. All steel construction. Roller measures 15-7/8” wide. Lock knob holds
roller at selected height. 250lb. capacity.
#D2273
Beefy rollers and sturdy adjustable
base makes this stand ideal for handling or supporting any flat or round
stock. Independent rollers adjust to
any angle. Adjusts in height from 251/4" to 43-1/4". Rollers tilt from 0 to
45°. 5-3/4" wide ball bearing rollers.
150 lb. capacity.
#D2272
Single roller stand . . . . . . . . . . . . $ 42.95
4-Point Roller Stand
This new and improved roller stand provides stability
for every wood processing job. Welded square steel
construction, variable height adjustment from 24-1/2"
to 42" and flat storage make this the roller stand of
choice. 13" wide ball bearing roller. 150 pound
capacity.
Tilting roller stand . . . . . . . . . . . . . . . . . . . . $ 42.95
#D2054
Shop Fox 13” Portable Planer
4-Point roller stand . . . . . . . . . . . . . . . . . . . . $ 19.95
Heavy Duty Ball Roller Stand
Cast iron base with leveling feet. Allows
material to roll in any direction. 150 lb.
capacity.
• Two knife cutterhead
• 10,500 RPM cutterhead speed
• Feed rate: 26 FPM
• 4 column support
• Cutterhead lock helps reduce
snipe
• Includes dust head with 4”
port
#50-160
. . . . . . . . . . . . . . . . . . $ 52.00
Shop Tool Stand
#W1675
$ 409.00
#D3167
$ 799.00
Set of 2 HSS 13” replacement knives . . . . . . . . . .$ 39.95
This tool table allows you to free up
valuable work space by getting your
smaller tools off your bench. A second
shelf can be added to store other items.
Table top measures 13” x 23” and is
30-1/2” tall. 700 lb. capacity.
#D2056
Monday - Friday
. . . . . . . . . . . . . . . . $ 39.95
24
Jointers & Accessories
Magnetic Jointer Knife Setting Jigs
Shop Fox 8” Jointer
This knife setting system allows you
to get jointer knives in perfect
alignment every time. It also allows
you to shift nicked knives to get a
perfect cut to an accuracy of ±
.001" . For 4" to 8" jointers with
HSS knives.
#W1211
#W1210
Steel body jig . . . . . . . . . . . . . . . . . . . . . $ 49.95
Polycarbonate body jig . . . . . . . . . . . . . . . $ 29.95
Dial Indicator and
Magnetic Base
Dial indicators are a necessity in any shop woodworking and metalworking alike. Use them
with magnetic bases for measuring runout, setting up tool and checking alignment. Magnetic
base has a very strong magnet that is easily
activated with a convenient switch. Mounts at
any angle and has a fine adjustment arm.
#D1057
#D1058
• Table size: 9-1/4" x 70"
• Cutterhead diameter: 3"
• Knives - size: 3 - 8" x 1"
x 1/8"
• Rabbeting capacity: 1/2"
• Max. width of cut: 8"
• Cutterhead speed: 5,500 RPM
• Cuts per minute: 16,500
• Approx. shipping weight: 495 lbs.
$ 999.00
Same as above but with Spiral
Cutterhead • #W1705
$ 1,395.00
#D3166
#D3349
1” travel x .001” indicator. . . . . . . . . . . . . $ 14.95
Magnetic base . . . . . . . . . . . . . . . . . . . . . . $ 20.50
Set of 3 HSS 8” replacement knives
. . . . . . . . . .$ 59.95
10-pack Repl carbide inserts for Spiral Cutterhead . .$ 36.50
Knife Hone & Guide
With this handy sharpener, you will be able to
hone your jointer and planer knives to razor sharpness without removing them from the machine!
Great for quick touch-ups and extends the period
between major re-sharpening.
#D1123
Push Blocks
Our push blocks are constructed of
high-impact molded plastic with natural rubber friction pads that grip the
workpiece firmly. Woodworkers can
work with confidence knowing that
these blocks are between their fingers and
the cutting tool. Bright, safety-orange
color makes them easy to find and
reminds woodworkers that safety comes first!
#W1400
#W1401
#W1684
Magnetic Featherboard
Standard push block . . . . . . . . . . . . . . . . . . . $ 4.95
Large push block . . . . . . . . . . . . . . . . . . . . . $ 7.95
Powerful magnets hold the Grip-Tite guide solid
to any cast iron or steel tabletop. As a board is
pushed between the Grip-Tite guide and the
fence, flexible polycarbonate feather blades
force the board down and against the fence.
Narrow boards can be cut, shaped, or jointed
without putting your hands near the blade.
$ 38.95
#GRIP-TITE
Shop Fox 6” Jointer
Shop Fox 6” Benchtop Jointer
•
•
•
•
•
•
•
•
•
•
• 12 amp, 1 phase,
110V motor
• Table length: 28-1/2”
• Cutterhead speed:
10,000 RPM
• Cuts per minute:
20,000
• Weight: 95 lbs.
Table size: 7" x 47"
Foot print: 18-1/4" x 15-1/2"
Cutterhead diameter: 2-1/2"
Knives - size: 3 - 6" x 1" x 1/8"
Rabbeting capacity: 1/2"
Maximum width of cut: 6"
Cutterhead speed: 5,000 RPM
Cuts per minute: 15,000
Approx. shipping weight: 300 lbs.
#W1694
#W1679
25
$ 239.00
$ 599.00
#D3165
$ 8.95
Set of 3 HSS 6” replacement knives . . . . . . . . $ 49.95
#D3319
Set of 2 HSS 6” replacement knives . . . . $ 24.95
Monday - Friday
Lathe & Accessories
Outside & Inside Calipers
Shop Fox 8” x 12” Mini Lathe
Stainless steel with hardened fulcrum spring and
points for long life. Precision ground with threaded
spool mechanism for infinite adjustment.
• Variable speed: 700 to 3,200 RPM
• 12” distance between centers
• 8” swing over bed
• 3/4” x 16 TPI RH
spindle
• Includes: MT #1
spur center, MT #1
live center, 4-1/4”
and 7” tool rests, 53/4” face plate.
• Weight: 45 lbs.
#W1704
#19052
#19054
Face Shield
This professional-quality shield offers full facial protection, making it an ideal aid for lathe work. Adjustment
for head size.
#CPV15M86U . . . . . . . . . . . . . . . . . . . . . $ 12.40
$ 169.00
General International 6” Slow Speed Grinder
• Ideal for sharpening high-speed steel
tools like chisels, lathe tools, knives and
plane irons
• 1,720 RPM
• Two 6” x 3/4” x 1/2”AH wheels
• Includes tool rests, eyeshields & flexible
neck work lamp
• Weight: 18 lbs.
8pc Deluxe H.S.S. Lathe Chisel Set
With proportionately longer handles to
cutting tools, these Lathe Chisels offer
outstanding control. Includes 1" skew, 11/2" skew, 1/2" spearpoint, 1/8" parting
tool, 1/2" round nose, 1/4" gouge, 1/2"
gouge and 3/4" gouge. 14-1/2" overall.
#D2228
$ 9.95
$ 9.95
8” outside caliper . . . . . .
8” inside caliper. . . . . . .
#15-625-M1
$ 59.00
#23-710
$ 175.00
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 34.95
Delta Sharpening Center
Steelex 5-Piece Mini Turning Chisel Set
For fine detail turning, this 5-piece turning chisel
set features well balanced hardwood handles and
high carbon steel cutting edges. Includes 1/16”
radius gouge, 1/8” radius gouge, 3/16” parting
tool, 1/4” spear point, 1/4” skew. 10-1/2” overall
length.
#D2250
. . . . . . . . . . . . . . . . . . . . . . . . $ 29.95
• 8”, wet wheel, 400 RPM
• 5” dry wheel, 3,450 RPM
• Includes tool rest base,
sliding tool holder, water
tank, tool rest, & eye
shield
• Weight: 43 lbs.
Steelex 6-Piece Deluxe Lathe Chisel Set
High speed steel blades with beefy ash handles.
Includes a 17” long 13/16” parting tool,
13/16” round nose and 3/8” gouge; a 19” long
1” skew, a 5/8” gouge and a 22-3/4” long
3/8” gouge. Comes in plastic storage box.
#D2304
#23-715 Knife grinding attachment. Holds planer and jointer
knives up to 15-1/2” long and may be used on wet
or dry wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 74.95
. . . . . . . . . . . . . . . . . . . . . . $ 84.95
Delta Shopmaster Utility Sharpener
Center Finder
Find the center of round or square stock. One
side locates a diagonal line on square stock up
to 8” x 8” and the other side locates a diagonal line on round stock up to 4-1/2” in diameter.
#D3098
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.95
• 120 grit, 4-1/2” x 1-1/2” wet/dry
grinding wheel for fine sharpening
• Reversible wheel rotation for use
with dual tool rests
• 0.7 AMP, 120V motor
• Slow, 170 RPM speed
reduces heat
• Weight: 9 lbs.
#GR050
Monday - Friday
$ 42.95
26
Sanders
Abrasive Cleaning Pad for Wide Belt Sanders
Shop Fox 24”Wide Belt Sander
with Digital Readout
• Numeric control pad and digital
readout provide the ultimate in
precision and ease of use.
• Sanding belt motor: 10 HP, 1
phase, 220V motor
• Conveyor feed motor: 1 HP
• Power table raise & lower
• Elevation motor: 1/3 HP, 220V, 1 phase
• Combination sanding head
• Belt size: 25" x 60"
• Maximum working thickness: 6”
• Air requirements: 57 PSI
• Variable feed rates: 14-3/4 to 49 FPM
• Dust outlet dia: Two 4” ports
• Approx. shipping weight: 1,650 lbs. #W1710
This product can pay for itself in just
one use while extending belt life six to
eight times normal. This special pad
measures 15” x 20” x 1-1/8”. Simply
feed it through the Wide-belt or Drum
Sander with light contact with the sandpaper and it unloads all the build-up.
#D3003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 59.95
Shop Fox 20”Wide Belt Sander
with Digital Readout
$ 7,500.00
25” x 60” Sanding Belts
Part No.
#25X60X40X
#25X60X60X
#25X60X80X
#25X60X100X
#25X60X120X
#25X60X150X
Grit
40
60
80
100
120
150
Price
$ 31.70/ea
$ 28.05/ea
$ 26.60/ea
$ 25.65/ea
$ 25.65/ea
$ 25.65/ea
Qty Price
$ 29.20/3+
$ 25.70/3+
$ 24.40/5+
$ 23.55/5+
$ 23.55/5+
$ 23.55/5+
20-1/2” x 48” Sanding Belts
#D3305
#D3306
#D3307
#D3308
#D3309
20-1/2”
20-1/2”
20-1/2”
20-1/2”
20-1/2”
x
x
x
x
x
48”
48”
48”
48”
48”
60 Grit AO Belt .
80 Grit AO Belt .
100 Grit AO Belt
120 Grit AO Belt
150 Grit AO Belt
...................
...................
...................
...................
...................
$ 23.50
$ 23.50
$ 21.50
$ 21.50
$ 21.50
• This compact wide belt sander
has digital controls and readout for
setting your sanding depth automatically.
• Sanding belt motor: 7-1/2 HP, 1
phase, 220V
• Conveyor feed motor: 1/2 HP
• Power table raise & lower
• Elevation motor: 1/3 HP, 220V, 1
phase
• Belt size: 20-1/2" x 48"
• Maximum working thickness: 6”
• Conveyor speed: 16.4, 23 & 32.8
FPM
• Dust port: 4"
#W1709
$ 5,499.00
#D3151
#D3152
#D3153
#D3154
#D3155
16”
16”
16”
16”
16”
x
x
x
x
x
48”
48”
48”
48”
48”
60 Grit AO Belt . . . . . . . . . . . . . . . . . . . . . . . $ 42.95
80 Grit AO Belt . . . . . . . . . . . . . . . . . . . . . . . $ 42.95
100 Grit AO Belt . . . . . . . . . . . . . . . . . . . . . . $ 42.95
120 Grit AO Belt . . . . . . . . . . . . . . . . . . . . . . $ 42.95
150 Grit AO Belt . . . . . . . . . . . . . . . . . . . . . . $ 42.95
Shop Fox 15" Wide Belt Sander
• This Wide Belt Sander with open end will sand
flat panels up to 30" wide in half the footprint of
other wide belt sanders with the same capacity.
• Sanding belt motor: 5 HP, 1 phase, 220V
• Conveyor feed motor: 1/4 HP
• Belt size: 16" x 48"
• Conveyor speed: 13 and 16 FPM
• Dust port: 5"
• Approx. shipping weight: 1,000 lbs.
#W1689
27
Performax 10-20” Single Drum Sander
• Variable speed conveyor
motor (0 to 12 FPM)
• One 5” x 10” drum
• Maximum sanding width: 20”
(in two passes)
• Minimum sanding length:
2-1/4”
• Maximum sanding thickness: 3”
• Minimum sanding thickness: 1/32”
• One 4” dust hood outlet
• Weight: 74 lbs.
#10-20+
$ 3,195.00
#60-1060
#60-1080
#60-1100
#60-1120
#60-1150
#60-1180
#60-1220
#60-1000
6ea)
6ea)
6ea)
6ea)
6ea)
6ea)
6ea)
2ea)
$ 539.00
60 grit ready-to-wrap abrasives . . . . .
80 grit ready-to-wrap abrasives . . . . .
100 grit ready-to-wrap abrasives . . . .
36, 2ea) 80, 2ea) 120 grit abrasives
Monday - Friday
.
.
.
.
.
.
.
.
$ 29.95
$ 29.95
$ 29.95
$ 29.95
$ 29.95
$ 29.95
$ 29.95
$ 29.95
Sanders
Shop Fox 6” x 80” Edge Sander
Part
No.
#6X80X60X
#6X80X80X
• 1-1/2HP, 1 phase, 110/220V
(Prewired 220V)
• Table size: 22" x 10-1/2"
• Table travel: 5"
• End sanding table allows for curved sanding
• Belt speed: 1,800 FPM
• Sanding head can be operated in any position
between 0° to 90° for bevel sanding
• 4" Dust port
2ea)
2ea)
2ea)
2ea)
2ea)
#D1265
#D1266
#D1267
#D1268
#D1269
Price
Each
$ 11.52
$ 11.15
Grit
60
80
6”
6”
6”
6”
6”
x
x
x
x
x
80”
80”
80”
80”
80”
100
120
150
180
220
Grit
Grit
Grit
Grit
Grit
Price
5-9
$ 9.25
$ 8.95
AO
AO
AO
AO
AO
Belt
Belt
Belt
Belt
Belt
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Price
10 +
$ 7.70
$ 7.45
.
.
.
.
.
$ 15.00/2pk
$ 15.00/2pk
$ 15.00/2pk
$ 15.00/2pk
$ 15.00/2pk
Abrasive Cleaning Sticks
Increase the life of new sanding belts
and discs with these quality abrasive belt
cleaners. Simply press the cleaner lightly against moving sanding belts and discs
to remove clogged-up pitch and sawdust.
#W1688
$ 699.00
#W1305
#W1307
1-3/8”x1-3/8”x8-1/2” stick $ 4.95
2”x2”x12” stick . . . . . . . . $ 7.45
Aluminum Oxide Hard Sanding Sleeves
Shop Fox Oscillating
Spindle Sander
Size
• 27-1/2" x 27-1/2" precisionground cast iron table
• Ten spindle sizes
• Table height: 35-1/2"
• Table tilt: 45° front and 20° to the
back
• Spindle speed: 1,725 RPM
• Oscillation speed: 72 SPM
• Stroke length: 1-1/2"
• Dust port: 4" opening
• Steel table inserts
• 100 grit sanding sleeve for each
spindle
#W1686
$ 799.00
40 Grit
1/4”x5”
N/A
3/8”x6”
N/A
1/2”x6”
#D14191
1 each
$ 1.70
5/8”x6”
N/A
3/4”x1”
N/A
3/4”x9”
N/A
1”x1”
N/A
1”x9”
N/A
Shop Fox 12” Disc Sander
• 1 HP, 1 phase, 110V
motor
• 8-1/4” x 17-1/2”
tilting table
• Disc speed: 1,700
RPM
• 2” dust port
• Weight: 74 lbs.
#W1708
$ 150.00
1-1/2”x9”
#D14741
1 each
$ 3.40
2”x1-1/2”
N/A
2”x9”
#D14891
1 each
$ 4.00
3”x9”
N/A
4”x9”
N/A
60 Grit
80 Grit
100 Grit
120 Grit
#D1400
3 pack
$ 3.90
#D1405
3 pack
$ 5.10
#D1420
3 pack
$ 5.10
#D1425
3 pack
$ 5.40
#D1430
3 pack
$ 2.20
#D1440
3 pack
$ 8.20
#D1445
3 pack
$ 2.20
#D1455
3 pack
$ 8.40
#D1475
3 pack
$ 10.20
#D1480
3 pack
$ 2.90
#D1490
3 pack
$ 12.00
#D1500
1 each
$ 5.30
#D1505
1 each
$ 9.00
#D1401
3 pack
$ 3.90
#D1406
3 pack
$ 5.10
#D1421
3 pack
$ 5.10
#D1426
3 pack
$ 5.40
#D1431
3 pack
$ 2.20
#D1441
3 pack
$ 8.20
#D1446
3 pack
$ 2.20
#D1456
3 pack
$ 8.40
#D1476
3 pack
$ 10.20
#D1481
3 pack
$ 2.90
#D1491
3 pack
$ 12.00
#D1501
1 each
$ 5.30
#D1506
1 each
$ 9.00
#D1402
3 pack
$ 3.90
#D1407
3 pack
$ 5.10
#D1422
3 pack
$ 5.10
#D1427
3 pack
$ 5.40
#D1403
3 pack
$ 3.90
#D1408
3 pack
$ 5.10
#D1423
3 pack
$ 5.10
#D1428
3 pack
$ 5.40
#D1433
3 pack
$ 2.20
#D1443
3 pack
$ 8.20
#D1448
3 pack
$ 2.20
#D1458
3 pack
$ 8.40
#D1478
3 pack
$ 10.20
#D1483
3 pack
$ 2.90
#D1493
3 pack
$ 12.00
#D1503
1 each
$ 5.30
#D1508
1 each
$ 9.00
Monday - Friday
N/A
#D1442
3 pack
$ 8.20
N/A
#D1457
3 pack
$ 8.40
#D1477
3 pack
$ 10.20
N/A
#D1492
3 pack
$ 12.00
#D1502
1 each
$ 5.30
#D1507
1 each
$ 9.00
28
Sanders
Shop Fox 6” x 48” Belt & 10” Disc Sander
Part
No.
4X36X40X
4X36X50X
4X36X60X
4X36X80X
4X36X100X
4X36X120X
4X36X180X
• 1HP, 1 phase, 110/220V motor
• Precision Ground Cast Iron Table
• Belt Speed: 2,300 FPM
• Disc speed: 2,420 FPM
• Vertical to horizontal belt head position
• One tilting table will move from belt to disc
unit
• Heavy-Duty Miter Gauge
• One 2” and one 2-1/2” dust port
• Approx. Shipping Weight: 170 lbs.
Price
Each
$ 8.25
$ 8.10
$ 7.50
$ 7.05
$ 6.85
$ 6.85
$ 6.85
$ 6.85
$ 6.85
$ 395.00
Price
5-9
$ 6.80
$ 6.80
$ 5.95
$ 5.65
$ 5.50
$ 5.50
$ 5.50
$ 5.50
$ 5.50
Price
10 +
$ 5.60
$ 5.60
$ 4.95
$ 4.70
$ 4.55
$ 4.55
$ 4.55
$ 4.55
$ 4.55
Pressure-Sensitive Adhesive
Sanding Discs
60
80
100
120
150
180
220
29
#W1717
$ 199.00
Adhesive Spray
Ideal for bonding abrasive discs without a PSA backing. A
non-wrinkling, water-resistant and repositionable adhesive.
Use for both temporary and permanent bonds. Bonds
woods materials easily. Prevents paper patterns and stencils from shifting. 11 oz. aerosol can.
Sized to fit most common disc sanders from hand held orbitals to hefty shop
sanders, these aluminum oxide discs are
pre-applied with top-quality pressure sensitive
adhesive. They’re available in a range from 60 to
220 grit and in diameters from 6” to 20”.
Grit
Price
10 +
$ 3.10
$ 3.10
$ 2.90
$ 2.75
$ 2.70
$ 2.70
$ 2.70
• End sanding table allows for
curved sanding
• Sanding head can be operated
in any position between 0° and
45° for bevel sanding
• Tables are height adjustable
• Belt speed: 2,100 SFPM
• Weight: 59 lbs.
Grit
40
50
60
80
100
120
150
180
220
Price
5-9
$ 3.70
$ 3.70
$ 3.50
$ 3.35
$ 3.20
$ 3.20
$ 3.20
Shop Fox 4” x 36” Edge Sander
#W1676
Part
No.
6X48X40X
6X48X50X
6X48X60X
6X48X80X
6X48X100X
6X48X120X
6X48X150X
6X48X180X
6X48X220X
Price
Each
$ 4.65
$ 4.65
$ 4.35
$ 4.15
$ 4.05
$ 4.05
$ 4.05
Grit
40
50
60
80
100
120
180
#SDA
6”
8”
9”
10”
12”
20”
#D1307
3 pack
$ 2.70
#D1308
3 pack
$ 2.70
#D1309
3 pack
$ 2.70
#D1310
3 pack
$ 2.70
#D1311
3 pack
$ 2.70
#D1312
3 pack
$ 2.70
#D1313
3 pack
$ 2.70
#D1314
3 pack
$ 4.80
#D1315
3 pack
$ 4.80
#D1316
3 pack
$ 4.80
#D1317
3 pack
$ 4.80
#D1318
3 pack
$ 4.80
#D1319
3 pack
$ 4.80
#D1320
3 pack
$ 4.80
#D1321
2 pack
$ 4.20
#D1322
2 pack
$ 4.20
#D1323
2 pack
$ 4.20
#D1324
2 pack
$ 4.20
#D1325
2 pack
$ 4.20
#D1326
2 pack
$ 4.20
#D1327
2 pack
$ 4.20
#D1328
2 pack
$ 5.00
#D1329
2 pack
$ 5.00
#D1330
2 pack
$ 5.00
#D1331
2 pack
$ 5.00
#D1332
2 pack
$ 5.00
#D1333
2 pack
$ 5.00
#D1334
2 pack
$ 5.00
#D1335
2 pack
$ 7.00
#D1336
2 pack
$ 7.00
#D1337
2 pack
$ 7.00
#D1338
2 pack
$ 7.00
#D1339
2 pack
$ 7.00
#D1340
2 pack
$ 7.00
#D1341
2 pack
$ 7.00
#D1342
2 pack
$ 18.00
#D1343
2 pack
$ 18.00
#D1344
2 pack
$ 18.00
#D1345
2 pack
$ 18.00
#D1346
2 pack
$ 18.00
#D1347
2 pack
$ 18.00
#D1348
2 pack
$ 18.00
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
Shop Fox 6” x 48” Belt
& 12” Disc Sander
• 1-1/2 HP, 1 phase, 110V motor
• Belt speed: 878 FPM
• Disc speed: 1,725 RPM
• Vertical or horizontal belt head
position
• Tilting tables for belt and disc
• 2” and 2-1/2” dust ports
#W1712
$ 575.00
Monday - Friday
Sanding Accessories
Sanding Belts
Portable Sanding Belts & Discs
Aluminum Oxide, Resin bond, Open Coat
“X”-weight for long life. If you wish, you
may combine various belts in order to
receive multiple quantity discounts.
Part
No.
1X30X50X
1X30X80X
1X30X100X
1X30X120X
1X30X180X
1X30X220X
1X30X320X
Grit
50
80
100
120
180
220
320
Price
Each
$ 2.30
$ 2.30
$ 2.30
$ 2.30
$ 2.30
$ 2.30
$ 2.30
Price
5-9
$ 1.89
$ 1.89
$ 1.89
$ 1.89
$ 1.89
$ 1.89
$ 1.89
Price
10 +
$ 1.59
$ 1.59
$ 1.59
$ 1.59
$ 1.59
$ 1.59
$ 1.59
Price
Each
$ 1.55
$ 1.35
$ 1.35
$ 1.35
$ 1.35
$ 1.35
$ 1.35
Price
5-9
$ 1.25
$ 1.10
$ 1.10
$ 1.10
$ 1.10
$ 1.10
$ 1.10
Price
10 +
$ 1.05
$ .90
$ .90
$ .90
$ .90
$ .90
$ .90
Price
Each
$ 9.40
$ 9.05
$ 7.15
$ 7.15
$ 7.15
Price
5-9
$ 9.20
$ 8.60
$ 7.20
$ 7.20
$ 7.20
Price
10 +
$ 8.10
$ 7.60
$ 6.50
$ 6.50
$ 6.50
Price
Each
$ 11.70
$ 10.55
$ 9.95
$ 9.50
$ 9.50
$ 9.50
$ 9.50
$ 9.50
Price
5-9
$ 10.95
$ 9.90
$ 9.50
$ 7.95
$ 7.95
$ 7.95
$ 7.95
$ 7.95
Price
10 +
$ 9.75
$ 8.90
$ 8.40
$ 7.35
$ 7.35
$ 7.35
$ 7.35
$ 7.35
Part
No.
1X42X50X
1X42X80X
1X42X100X
1X42X120X
1X42X180X
1X42X220X
1X42X320X
Grit
50
80
100
120
180
220
320
Part
No.
4X132X60X
4X132X80X
4X132X100X
4X132X120X
4X132X150X
Grit
60
80
100
120
150
Part
No.
6X89X40X
6X89X60X
6X89X80X
6X89X100X
6X89X120X
6X89X150X
6X89X180X
6X89X220X
Grit
40
60
80
100
120
150
180
220
This rubber compound block is embedded with grit
that is constantly exposed during use. Popular applications for this unique block includes cleaning rust
from tools and metals. Acts like a rust “eraser. ”
Measures 3” x 2” x 3/4”.
Fine grit block . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.95
Medium grit block . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.95
Coarse grit block . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.95
Sanding Blocks
Made of extremely heavy rubber, these blocks are the
flattest and truest around. Use your standard sheet
materials, cut them to size, clamp them in with the builtin clamping device and start sanding.
#C521
#C522
Part
No.
3X21X40X
3X21X50X
3X21X60X
3X21X80X
3X21X100X
3X21X120X
Grit
40
50
60
80
100
120
Price
Each
$ 2.85
$ 2.65
$ 1.65
$ 1.65
$ 1.60
$ 1.60
Price
10 - 49
$ 1.50
$ 1.50
$ 1.50
$ 1.30
$ 1.25
$ 1.25
Price
50 +
$ 1.25
$ 1.25
$ 1.10
$ 1.10
$ 1.05
$ 1.05
Price
Each
$ 2.70
$ 2.55
$ 2.50
$ 2.15
$ 1.65
$ 1.65
$ 1.65
$ 1.65
$ 1.65
$ 1.65
Price
10 - 49
$ 2.15
$ 2.05
$ 1.95
$ 1.50
$ 1.30
$ 1.30
$ 1.30
$ 1.30
$ 1.30
$ 1.30
Price
50 +
$ 1.80
$ 1.70
$ 1.50
$ 1.35
$ 1.10
$ 1.10
$ 1.10
$ 1.10
$ 1.10
$ 1.10
Price
Each
$ 3.50
$ 3.30
$ 3.15
$ 2.45
$ 2.40
$ 2.40
$ 2.40
$ 2.90
$ 2.90
Price
10 - 49
$ 2.80
$ 2.65
$ 2.50
$ 2.00
$ 1.95
$ 1.95
$ 1.95
$ 2.35
$ 2.35
Price
50 +
$ 2.35
$ 2.20
$ 2.10
$ 1.65
$ 1.60
$ 1.60
$ 1.60
$ 1.95
$ 1.95
Part
No.
3X24X40X
3X24X50X
3X24X60X
3X24X80X
3X24X100X
3X24X120X
3X24X150X
3X24X180X
3X24X220X
3X24X280X
Grit
40
50
60
80
100
120
150
180
220
280
Sandflex® Abrasive Blocks
#SF101
#SF102
#SF103
Aluminum Oxide, Resin Bond, Open Coat and
“X”-weight for long life.
The order number denotes belt size and grit. We
stock belts and discs for virtually every sanding
machine on the market today.
Combine various belts and discs in order to
receive multiple quantity discounts.
5” sanding block . . . . . . . . . . $ 7.95
9” sanding block . . . . . . . . . . $ 12.95
Part
No.
4X24X40X
4X24X50X
4X24X60X
4X24X80X
4X24X100X
4X24X120X
4X24X150X
4X24X180X
4X24X220X
Grit
40
50
60
80
100
120
150
180
220
Sand Paper Sheets
Constructed of tough aluminum oxide abrasive
with durable backing.
Sold per sleeve of 50 standard sized 9" X 11" sheets
Part Number
#17-101-080
#17-101-100
#17-101-120
#17-101-150
#17-101-180
#17-101-220
#17-101-320
#17-101-400
Grit/Weight
80D
100B
120B
150B
180B
220B
320B
400B
Monday - Friday
1-9 ea.
$ 19.95
$ 17.50
$ 17.50
$ 17.50
$ 17.50
$ 17.50
$ 17.50
$ 17.50
10+ ea.
$ 16.95
$ 15.50
$ 15.50
$ 15.50
$ 15.50
$ 15.50
$ 15.50
$ 15.50
30
Drill Presses & Accessories
Shop Fox 34” 5-Speed Floor
Model Radial Drill Press
Drill Press Utility Tray
Keeps tools within easy reach;
swings out of the way. Durable, textured plastic 11” diameter tray with
metal swivel and mounting strap.
Fits drill presses with column diameter ranging in size from 1-1/2” to
3-5/8”.
• The radial arm drill press is one of the most versatile and handy drill presses you can add to your
shop. Between the tilt of the head and the tilt of the
table you can drill any angle necessary.
• Spindle travel: 3-1/4"
• Drill chuck: 5/8"
• Speed range: 550 to 3,470 RPM
• Table size: 12-1/4" Dia.
• Approx. Ship. Weight: 150 lbs.
#W1670
#DPT-1
Shop Fox 34” 5-Speed Benchtop
Radial Drill Press
$ 270.00
Angle Drill Press Vise
This angle vise offers a full 90° adjustment from
horizontal to vertical with easy-to-read scale and
indexing pin set for every 15°. Capacity is 3-3/4”.
Jaws measure 4-1/8” wide.
#D2933
Drill press tool tray . . . . . . . . . . . . . . . . . $ 12.00
• The radial arm drill press is one
of the most versatile and handy
drill presses you can add to your
shop. Between the tilt of the head
and the tilt of the table you can
drill any angle necessary.
• 5/8” chuck size
• 3-1/4” spindle travel
• 9-3/4” round table
• Weight: 100 lbs
Angle drill press vise . . . . . . . . . . $ 45.00
Drill Press Vises
#W1669
These drill press vises offer precision ground
steel guide rods and precise threads for
smooth action. Ground steel jaws feature
fixed jaw V-grooves for holding round stock.
#D2728
#6856009
#D2729
4” drill press vise . . . . . . . . . . . . . . . . . . . . . . . . . . $ 18.95
Powermatic 4” drill press vise . . . . . . . . . . . . . . . . . $ 38.00
6” drill press vise . . . . . . . . . . . . . . . . . . . . . . . . . . $ 26.95
Shop Fox 17" 12-Speed
Floor Model Drill Press
•
•
•
•
•
•
Cross Sliding Vise
This cross sliding vise features dovetailed ways with adjustable gibs,
steel jaws and precision longitudinal
travel and cross travel. Fixed jaw
has a horizontal and vertical
V-groove for holding round stock.
#D2731
1 HP, 1 phase, 110/220V motor
Spindle travel: 3-1/4"
Drill chuck: 5/8"
Range of speeds: 140-3050 R.P.M.
Table size: 14" dia.
Approx. Ship. Weight: 200 lbs.
4” cross sliding vise . . . . . . . . . . . . . . . . . . $ 59.95
Drill Press Clamps
Drill press clamps adjust
quickly and easily to lock
your workpiece in any position. The clamping pad
pivots to conform to any
workpiece, ensuring uniform
pressure.
#W1301
#D2192
#D2493
#W1680
31
$ 230.00
6” clamp, 1-1/2” capacity . . . . . . . . . . . . . $ 12.95
10” clamp, 3” capacity . . . . . . . . . . . . . . . $ 14.95
12” clamp, 5” capacity . . . . . . . . . . . . . . . $ 16.95
$ 350.00
Monday - Friday
Drill Presses & Accessories
Drum Sander Set
Shop Fox 13-1/4" 12-Speed
Oscillating Bench Drill Press
This drum sander set includes
three rubber sanding drums
4-1/4” in length to accommodate
1”, 1-1/2” and 2” diameter sanding sleeves. This kit also includes one 80 grit sleeve for
each drum to get things started
• This unit serves as both a regular Drill
Press and an Oscillating Spindle Sander
• Spindle travel: 3-1/4"
• Drill chuck: 5/8"
• Dust port size: 2-1/4"
• 12 speeds: 250-3,050 R.P.M.
• Table: Round 12-3/8" Dia.
• Includes: Mandrel and 3-spindle drum
sander set
• Approx. Ship. Weight: 130 lbs.
#W1668
#D2677
Mandrel
This carefully machined mandrel has a 3/8” shank and is
required to use our Drum Sander Set with any machine.
Mandrel is included with the Shop Fox Oscillating Drill
Presses featured here.
Comes with 1/2”, 3/4”, 1”, 1-1/2”
X 2” diameter drums. Drums are 2”
long with 1/4” shank. Aluminum
oxide sanding sleeves.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
Precision Drill Guide
Drills accurate right-angled or variable angled
holes with built-in protractor scale. Adjusts
45° in either direction of vertical drill position. Slide lock for sanding and buffing
applications. Anchoring pins hold the guide
securely in place on flat surfaces, narrow
edges, or large tubing. Use with 3/8” and
1/2” portable electric drills. Includes 3/8”
chuck and chuck key.
#36/37
#D2722
$ 240.00
28-Piece Drum Sanding Set
#709471
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.40
. . . . . . . . . . . . . . . . . $ 44.10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.95
Shop Fox 8-1/2” 5-Speed Oscillating
Bench Drill Press
• This unit serves as both a regular Drill Press
and an Oscillating Spindle Sander
• 1/2” chuck size
• 1-5/8” spindle travel
• 7” x 7” square table
• 2-1/4” dust port
• Includes: Mandrel for use with drum sander set
• Weight: 54 lbs
$ 125.00
#W1667
Drum sander set . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 9.40
#D2677
Doweling Jigs
Now you can drill using a multiple combination of holes using various hole sizes. Selfcentering action. All four holes are tapped to
take replaceable drill bushings. Drill hole
sizes are 1/4”, 5/16”, and 3/8”. Six drill
bushings are supplied, 2 of each size.
Sleeveless Sanding Drums
Turn your drill press into a spindle sander. A
simple lock holds sandpaper tight so you can
use roll or sheet paper instead of sanding
sleeves. Recommended speed is 1,750 RPM.
Arbor required for use with sanding drums.
For use in drill presses and lathe chucks.
#328-2000
#328-3000
#328-3100
#328-3200
#328-3300
#328-6300
#328-1200
#328-1300
#328-1400
3/4” dia x 2-1/4” drum (complete with 1/4” arbor) . .
3/4” dia x 3” drum . . . . . . . . . . . . . . . . . . . . . . .
1” dia x 3” drum . . . . . . . . . . . . . . . . . . . . . . . .
2” dia x 3” drum . . . . . . . . . . . . . . . . . . . . . . . .
3” dia x 3” drum . . . . . . . . . . . . . . . . . . . . . . . .
3” dia x 6” drum . . . . . . . . . . . . . . . . . . . . . . . .
1/2” shank arbor . . . . . . . . . . . . . . . . . . . . . . . . .
3/8” shank arbor . . . . . . . . . . . . . . . . . . . . . . . . .
1/4” shank arbor . . . . . . . . . . . . . . . . . . . . . . . . .
#D2500
$ 14.15
$ 19.85
$ 18.55
$ 22.50
$ 25.15
$ 35.30
$ 1.55
$ 1.90
$ 1.90
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 56.95
Dowels
Part No.
Size
Package
Quantity
Price
#62054
#62060
#62066
1/4” x 1-1/2”
5/16” x 1-1/2”
3/8” x 1-1/2”
20
20
20
$ 2.35
$ 2.35
$ 2.35
Monday - Friday
32
Rosette Cutters
Rosette Cutterhead & Knives
Carbide Rosette Cutters
This very popular Rosette cutterhead
makes rosettes up to 3” in diameter.
And, with the optional chuck arbor, you
can adapt the cutterhead directly to a
tailstock or spindle taper. Cutterhead
comes complete with shank and mounts
directly to a heavy-duty drill press or wood
lathe with 1/2” chuck.
Smooth cutting, one-piece rosette cutters feature shear cutting carbide-tipped
edges fro both slicing and scraping
action. Get professional results and a
fine finish. 2-1/8” Diameter Rosette
Cutters are milled from a solid steel
blank. These carbide tipped 1/2” shank
Rosette Cutters make crisp rosettes in
most hardwoods and softwoods.
Please note: although these cutters look like oversized router bits, they
are too big for normal router speeds and are designed for use with a
variable speed drill press or lathes only.
#W1250
Rosette cutterhead . . .
#W1251
#W1252
Chuck arbor, JT6 MT#2 . . . . . . . . . . . . . . . . . . . . . . . . $ 5.95
Chuck arbor, JT6 MT#3 . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
$ 29.95
Rosette Knives
These knives will produce intricately carved
rosettes on a drill press. You can also plane
smaller stock by using the flat profile knife
(#W1255). Knives are ground on opposite
sides, so only one knife is needed. For best
results, we advise using birch, cherry or oak,
at machine speeds of 250 to 350 RPM.
2-5/8”
#W1256
$ 19.95
2-1/4”
#W1259
$ 19.95
2-1/4”
#W1262
$ 19.95
2-5/8”
#W1265
33
$ 19.95
2-1/2”
#W1257
$ 19.95
2-1/2”
#W1260
$ 19.95
2-1/2”
#W1263
$ 19.95
2-9/16”
#W1266
$ 19.95
3”
#W1255
$ 19.95
2-5/8”
#W1258
#DC1768
$ 59.95
#DC1769
$ 59.95
#DC1770
$ 59.95
#DC1771
$ 59.95
#DC1772
$ 59.95
#DC1774
$ 59.95
#DC1775
$ 59.95
#DC1776
$ 59.95
#DC1777
$ 59.95
$ 19.95
2-3/4”
#W1261
$ 19.95
2-15/16”
#W1264
$ 19.95
2-1/2”
#W1267
$ 19.95
Monday - Friday
Drilling Accessories
Steelex Forstner Bits
16-Piece HSS Hex Shank Forstner Bit Set
With a center point for positioning, the scoring motion of the Forstner Bit's outer rim produces a clean, crisp entry and guides the bit
accurately to the bottom of the hole. The
shearing action of the Forstner Bit's inner cutting edges plane thin slices of wood directly
upward and out of the hole reducing burning
and chatter. 3/8” shank. 3-1/2” long.
You can buy with confidence knowing these high
speed steel forstner bits will provide many years
of dependable service. This set features hex
shanks for no-slip gripping in 3/8" and larger drill
chucks. Set include: 1/4", 3/8", 1/2", 5/8", 3/4",
7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8",
1-3/4", 1-7/8", 2" and 2-1/8". The 1-1/8" and
larger bits feature saw-tooth edges for aggressive
boring action.
#D1001
#D2846
#D1002
#D2847
#D1003
#D2848
#D1004
#D2849
#D1005
#D2850
#D1006
#D2851
#D1007
#D2852 *
#D1008 *
#D2853 *
1/4” . . .
5/16” . .
3/8” . . .
7/16” . .
1/2” . . .
9/16” . .
5/8” . . .
11/16” .
3/4” . . .
13/16” .
7/8” . . .
15/16” .
1” . . . .
1-1/16”
1-1/8” .
1-3/16”
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 3.95
$ 3.95
$ 4.49
$ 4.49
$ 4.95
$ 4.95
$ 5.49
$ 5.49
$ 5.95
$ 5.95
$ 6.49
$ 6.75
$ 6.95
$ 7.25
$ 7.95
$ 8.25
#D1009 *
#D2854 *
#D1010 *
#D2855 *
#D1011 *
#D2856 *
#D1012 *
#D2857 *
#D1013 *
#D2858 *
#D1014 *
#D2859 *
#D1015 *
#D2860 *
#D1016 *
1-1/4”. . .
1-5/16”. .
1-3/8”. . .
1-7/16”. .
1-1/2”. . .
1-9/16”. .
1-5/8”. . .
1-11/16”.
1-3/4”. . .
1-13/16”.
1-7/8”. . .
1-15/16”.
2 ”. . . . . .
2-1/16”. .
2-1/8”. . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 8.95
$ 8.95
$ 9.95
$ 9.95
$ 10.95
$ 10.95
$ 11.95
$ 11.95
$ 12.95
$ 12.95
$ 13.95
$ 13.95
$ 14.95
$ 14.95
$ 15.95
* (saw toothed)
16-Piece Forstner Bit Set
Get sixteen precision ground bits along with an
attractive wooden storage box. Includes 1/4”,
3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 11/4”, 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”,
2”, 2-1/8” diameter bits. Each forstner bit is
approximately 3-1/2” long.
#D1030
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 119.95
#D2719
6-Piece HSS Hex Shank
Forstner Bit “Filler” Set
This set features hex shanks for no-slip
gripping in 3/8" and larger drill chucks.
Set includes: 5/16", 7/16", 9/16",
11/16", 13/16", and 15/16".
#D3076 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.95
15-Piece HSS Hex Shank Forstner Bit “Filler” Set
This set features hex shanks for no-slip gripping
in 3/8" and larger drill chucks. Set includes:
5/16", 7/16", 9/16", 11/16", 13/16", 15/16", 11/16", 1-3/16", 1-5/16", 1-7/16", 1-9/16", 111/16", 1-13/16", 1-15/16" and 2-1/16" bits.
. . . . . . . . . . . . . . . . . . . . . . $ 49.95
#D3077
6-Piece Brass Coated Wire Brush Set
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 54.95
7-Piece Forstner Bit Set
Get seven precision ground bits along with an
attractive wooden storage box. Includes 1/4”,
3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1” bits. Bits
are approximately 3-1/2” long.
#D1027 . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
This 6-piece brush set is a perfect
addition to your toolbox. The set
contains five wheels (2 - 1-5/8”,
one each 2”, 2-3/8” and 3”) and a
cup brush (2” diameter). All have a
1/4” shank suitable for use in a
portable drill. The brass coating helps to minimize corrosion of the steel
bristles even after multiple uses.
#D2290
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
35mm Hinge Boring Bit
Screw Extractors
Carbide tipped boring bit creates clean entry
holes with smooth interiors for European-style
hinges. Use in drills or drill presses with 3/8”
chucks.
Turned counterclockwise in an electric drill, this
tool makes easy work of removing broken screws from
wood, while leaving a clean hole that can be filed with a
dowel or plug. Use the 1/4” model for screws up to #8 and
the 5/16” model for #10 screws and larger. Size refers to the
finished hole size.
#D1026 . . . . . . . . . . . . . . . . . . . . . . . $ 15.95
#800-3004
#800-3005
#800-3006
1/4” extractor . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.75
5/16” extractor . . . . . . . . . . . . . . . . . . . . . . . . $ 12.45
3/8” extractor . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.15
www.belsaw.com
Monday - Friday
34
Steelex HSS Brad Point Bits
13-Piece Spade Bit Set
The woodworkers choice in boring bits.
With precision cutting spurs and center
point for accurate drilling, these High
Speed Steel bits will last long in the toughest woods.
One of the most complete spade bit sets available. Features bit sizes 1/4”, 5/16”, 3/8”,
7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”,
13/16”, 7/8”, 15/16”, and 1”. Includes wall
rack.
#D2332
#D2333
#D2334
#D2335
#D2336
#D2337
#D2338
#D2339
#D2340
#D2341
#D2342
#D2343
#D2344
1/8”. . .
9/64”. .
5/32”. .
11/64”.
3/16”. .
13/64”.
7/32”. .
15/64”.
1/4”. . .
17/64”.
9/32”. .
19/64”.
5/16”. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 1.40
$ 1.50
$ 1.50
$ 1.60
$ 1.60
$ 1.60
$ 1.70
$ 1.70
$ 1.70
$ 1.89
$ 1.99
$ 2.10
$ 2.40
#D2345
#D2346
#D2347
#D2348
#D2349
#D2350
#D2351
#D2352
#D2353
#D2354
#D2355
#D2356
21/64” .
11/32” .
23/64” .
3/8” . . .
25/64” .
13/32” .
27/64” .
7/16” . .
29/64” .
15/32” .
31/64” .
1/2” . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 2.50
$ 2.50
$ 2.50
$ 2.50
$ 2.60
$ 2.70
$ 2.70
$ 2.80
$ 2.90
$ 3.00
$ 3.20
$ 3.20
#D2053
. . . . . . . . . . . . . . . . . . . . . . $ 19.95
7-Piece Deluxe Auger Bit Set
These hex shank, long length bits allow the user to
bore deep holes through most wood, walls and
flooring. The screw tip guides the bit on a straight
path. Set includes 1/4”, 3/8”, 1/2”, 5/8”, 3/4”,
7/8” and 1” auger bits. Includes wood storage
box.
#D2021 . . . . . . . . . . . . . . . . . . . . . . . . $ 49.95
8-Piece Deluxe Plug Cutter Set
25-Piece Brad Point Set
This high quality carbon steel plug cutter set
includes both straight and tapered styles. Makes
smooth-sided plugs with rounded shoulders for
easy insertion into a bored hole.
Every woodworker needs this set. Twenty-five
bits in sizes from 1/8” to 1/2” in 1/64” increments. Comes in a steel index.
#D1034 . . . . . . . . . . . . . . . . . . . . . . . $ 17.95
#D2022
.....................
7-Piece Carbide Tipped
Brad Point Set
4-Piece Plug Cutter Set
Carbide tipped brad point drill bits stay sharper longer and practically eliminate cross-grain
tear-out. Includes 1/8”, 3/16”, 1/4”, 5/16”,
3/8”, 7/16” and 1/2” bits.
#D1032
High quality carbon steel tapered style plug cutters in wood box, sizes 1/4”, 3/8”, 1/2”, and
5/8”.
. . . . . . . . . . . . . . . . . . . . . . . $ 21.95
#190090
. . . . . . . . . . . . . . . . . . . . . $ 17.95
7-Piece Deluxe Brad Point Set
Tenon / Plug Cutters
These bits feature fully ground flutes.
Includes 1/8”, 3/16”, 1/4”, 5/16”, 3/8”,
7/16” and 1/2” bits.
These cutters are uniquely designed to cut round, smooth
tenons, plugs and dowels up to 3” long. Milled from solid
high-carbon steel, the precision-ground edges cut through the
hardest woods while maintaining an extremely sharp edge.
#D1033 . . . . . . . . . . . . . . . . . . . . . . $ 6.95
7-Piece Steel Brad Point Set
This starter set includes the most popular sizes for
doweling. Includes 1/8”, 3/16”, 1/4”, 5/16”,
3/8”, 7/16” and 1/2” bits.
#D1031
$ 36.50
#D1045
#D1046
#D1047
#D1048
#D1049
3/8” cutter
1/2” cutter
5/8” cutter
3/4” cutter
1” cutter . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 19.95
$ 22.95
$ 24.95
$ 26.95
$ 29.95
. . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
Steelex Hinge Bits
7-Piece Split Ring Depth Stop Set
Precise and consistent drilling depths can
be achieved with these split ring depth
stops. Simply slide over the appropriately
sized drill bit and lock in position by
tightening the socket head screw. Split
ring clamping prevents damage to drill bits and allows tremendous tightening pressure so there’s no slipping on the bit. Sizes include: 1/8”,
3/16”, 1/4”, 5/16”, 3/8”, 7/16”, and 1/2”. Includes hex wrench.
#D2803
35
.......................................
Drill perfectly aligned hinge screw holes. Self
centering, spring-loaded drill bits are guided by
the hinge screw holes. Hex shanks fit all quickchange drill/drive systems.
#D2713
#D2714
#D2715
Hinge Bit (#3,4) . . . . . . . . . $ 4.40
Hinge Bit (#5,6) . . . . . . . . . $ 4.40
Hinge Bit (#8,9,10) . . . . . . . $ 4.40
$ 4.95
Monday - Friday
Steelex 5-Piece Rotary Rasp Set
29-Piece Cobalt Drill Bit Set
Quarter inch shank Rotary Rasp Set features
five different shaping profiles to remove
wood quickly with aggressive cutting teeth.
Each Rotary Rasp mounts in 1/4" or larger
variable speed drill for unsurpassed wood
shaping ability.
These premium bits are engineered to handle high
tensile steels and hard-to-machine alloys and are
typically used in aerospace applications. Set features an excellent selection of bits, ranging from
1/16” to 1/2” in increments of 1/64”. Includes
convenient steel index.
#D2257
. . . . . . . . . . . . . . . . . . . . $ 3.99
#D2140 . . . . . . . . . . . . . . . . . . . . . . . . . $ 74.95
Adjustable Circle Cutter
115-Piece HSS Drill Bit Set
Designed for use on a drill press, this fully
Adjustable Circle Cutter will cut flat sided holes in
wood from 1" to 5". Made of M-2 alloy steel, this
Circle Cutter features a 3/8" hex shank, 5/16" drill,
center point and Allen® wrench.
This drill set features 29 fractional bits ranging from 1/16” to 1/2”, lettered bits from A
to Z, and 60 numbered bits. HSS bits are
treated and finished with a black oxide coating. Housed in a rugged steel case with easyto-read markings.
#D2251
. . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
#D1137 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22-Piece Tapered Drill Set
29-Piece HSS Drill Bit Set
This set contains tapered drills sized for
#5, #6, #7, #8, #9, #10, #12 screws,
plus the stop collars and countersinks &
counterbores to match them. Includes
allen wrench.
#D1041 . . . . . . . . . . . . . . . . . . . . . . . . $ 16.95
This precision crafted set features an excellent
selection of bits, ranging from 1/16” to 1/2” in
increments of 1/64”. HSS bits are treated and
finished with a black oxide coating. Housed in a
rugged steel indexed case.
#D1135 . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
$ 52.95
Right Angle Drill Attachment
This right angle drill attachment allows
the user to access tight places where normal drills can’t reach. 3/8” shaft fits
power drills with 3/8” or larger chucks.
Includes side handle, 3/8” chuck and
chuck key.
#D2960
. . . . . . . . . . . . . . . . . . . . . . . . $ 15.95
Drill Guide
This simple, yet precise Drill Guide locates exact
drilling centers and guides drill bits perfectly perpendicular to the workpiece on flat, round, spherical and
corner edges. The drill guide also acts as a quick
and accurate dowel drilling guide for edge joining.
Includes 3/16”, 1/4”, 5/16”, 3/8”, 7/16” and 1/2”
drill bushings, locating pin and guide.
#D3206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.95
25-Piece Quick Change Bit Set
This all-in-one Quick Change Bit Set makes
changing from drill bit to screwdriver bit or nut
driver a snap. Hex shank bits and a spring loaded
quick change chuck are the ultimate in convenience. The quick change chuck fits all portable
drills. 1/16” through 1/4” drill bits are titanium
coated for long life. Includes a compact storage
case.
#D3205
. . . . . . . . . . . . . . . . . . . . . . . $ 19.95
Drill Doctor #750 Professional
Drill Bit Sharpener
The top-of-the-line model. Made for craftsmen and tradesmen who work in metals as
well as wood. Restores split points and 135°
point angles. Features a replaceable diamond sharpening wheel, comes with two
chucks for handling drill bits from 3/32” to
3/4” and a chuck storage rack. 110V.
#DD750SP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 155.00
Drill Doctor #500 Tradesman
Drill Bit Sharpener
Restores high performance split points (split
points are self-centering bits that eliminate the
need for a center punch). Also restores 135°
drill points - used for drilling hardened metals.
Features a replaceable diamond sharpening
wheel. Sharpens drill sizes 3/32” to 1/2”. 110V
#DD500SP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 125.00
Tap & Die Sets
These fine quality sets include both coarse and
fine thread tap and dies. Tap and dies are
number from #4-40 to #12-24 and fractional
taps and dies from 1/4" -28 to 1/2" -20 and
1/8" -27 NPT. Each set includes thread gauge,
tap handle, die handle and small tap chuck, all in a nice molded case. The
60-piece set also includes metric taps and dies from M3 x .5 to M12 x 1.75.
Made of high carbon steel.
#W2503
#D2018
40-Piece Tap & Die Set . . . . . . . . . . . . . . . . . . . $ 49.95
60-Piece Tap & Die Set . . . . . . . . . . . . . . . . . . . $ 59.95
Monday - Friday
36
Drilling Accessories & Mortiser
BeadLOCK® Loose Tenon Joinery System
A patented mortise and tenon joint that's
made with a hand drill!
Shop Fox Mortising Machine
Now you can use your hand drill to make a
joint that is stronger and more versatile than
dowel, biscuit, or standard mortise and
tenon joints. Loose tenon joinery provides
an excellent means of joining two members
particularly for deep joints and those joints
where profiled parts come together like from
matched cabinet cutters. With the
BeadLOCK jig, you simply drill holes and
insert BeadLOCK tenon stock for a strong,
accurate joint that's quick and simple to make.
•
•
•
•
•
•
•
•
•
3/4 HP, 1 phase, 110V motor
1/4” to 1/2” Chisel capacity
Unique swiveling head assembly
Double support columns
Mortise to the center of a 8" wide board
Mortise lumber to 8-3/4" thick
1/2” chuck capacity
Extra long (22") quick set handle
Approx. Ship. Weight: 90 lbs.
Combination BeadLOCK Kit
#W1671
To make both 3/8" and 1/2" joints, this kit
includes a beadLOCK jig with one 3/8" and
one 1/2" guide block, two feet of 3/8" and two
feet of 1/2" tenon stock, a shim set and complete instructions.
#BTJ9802
. . . . . . . . . . . . . . . . . . . . $ 45.99
$ 229.00
Steelex Mortising Chisels and Bit Set
BeadLOCK Tenon Stock
BeadLOCK Tenon Stock is made of premium birch
which is naturally stable and very strong.
Additional tenon stock to fit both 3/8" and 1/2"
beadLOCK joints, is available in packages of three
one-foot lengths.
#BTJ9803
#BTJ9804
3/8” tenon stock (36”) . . . . $ 5.50
1/2” tenon stock (36”) . . . . $ 5.50
BeadLOCK Router Bits
#BRB0100
#BRB0101
These carbide-tipped safety bits are available in both 3/8" and 1/2" sizes and are
intended for use on stationary router tables.
Now woodworkers can make their own tenon
stock in any wood species desired. 1/2"
shank.
3/8” stock router bit . . . . . . . . . . . . . . . . . . . $ 63.99
1/2” stock router bit . . . . . . . . . . . . . . . . . . . $ 63.99
8-Tray Sandpaper Storage Stand
This sandpaper storage stand with eight
sliding trays is the perfect way to protect,
sort and store standard sized sandpaper
sheets. Open-front trays allow easy sandpaper identification by either sight or
feel. Each tray measures 10” wide by
12” deep and will hold up to 50 full size
sandpaper sheets.
#D2927 . . . . . . . . . . . . . . . . . . $ 35.00
#D2839
#D2840
#D2841
#D2842
#D2843
#D2844
#D2845
1/4” Mortising chisel . . . . . . . . . . . . . . . . . . . . . . .
5/16” Mortising chisel . . . . . . . . . . . . . . . . . . . . . .
4-piece set (1/4” to 1/2”) in plastic case . . . . . . . .
Accusharp Knife
Sharpener
Finally, a Knife
Sharpener anyone can use!
No more messy oils or stones. In
about 10 seconds, you can sharpen
knives, (even serrated knives),
cleavers, axes, machetes, and many
other cutting tools. The large ergonomic handle fits either hand safely and
securely. The full length finger guard protects your fingers. Sharpening
blades are Diamond Honed Tungsten Carbide and provide years of reliable
use. AccuSharp will not rust and can be cleaned with soap and water, or
in the dishwasher.
#15896
.......................................
$ 10.95
Try / Setup Gauge
This solid brass tool lets you have a 90° angle available at all times
(hole is for key chain). Size is 2-3/8” x 1-7/8”.
#625-3500
37
$ 8.95
$ 8.95
$ 8.95
$ 8.95
$ 10.95
$ 12.95
$ 34.95
. . . . . . . . . . . . . . . . . . . . . . . $ 6.60
Monday - Friday
Dust Collectors
Woodshop Dust Control
Shop Fox 3 HP Dust Collector
•
•
•
•
•
•
•
•
•
A practical guide to respirators, shop vacuums, central
collection systems, air-filtration devices, and more. Wood
chips and sawdust in the woodshop are not just a nuisance -- they can also present a significant health hazard. But the good news is that Woodshop Dust Control,
the first definitive and comprehensive book on the subject, shows you how to successfully control woodshop dust.
Motor amp draw: 18 Amps (220V)
One 8” or four 4” hose connections
Air suction cap.: Approx. 2,800 CFM
Bag size (Dia. x depth): 19" x 33" (4)
Height (With bags inflated): 78"
Bag volume: 10.8 Cubic Feet
Standard bag filtration: 30 Micron
Approx. shipping weight: 170 lbs.
#W1687
#70246
Controlling Dust in the Workshop
$ 625.00
#D1795
#D1796
#D3116
Replacement Upper Bag . . . . . . . . . . . . . . . . $ 23.95
Replacement Lower Bag . . . . . . . . . . . . . . . . . $ 23.95
3 Micron Oversized Bag . . . . . . . . . . . . . . . . . $ 59.95
Woodworkers often get in trouble with their families for
messy sawdust. Worse, wood dust has been shown to be
a grave health hazard....Proper dust collection can prevent or minimize...these problems. Peters shows the
types of protective equipment and dust collectors available and provides instructions on designing a collection
system. Plans to make fixtures for specific machines are given, as well as
maintenance instructions. Every woodworking collection should include
this title.
#3689-4
Constructing Staircases
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
Shop Fox 2 HP Dust Collector
Its 10 chapters cover all the essentials including the subjects of
code requirements, stairwell framing, notched and housed
stringers, L-shaped, and U-shaped and curved stair construction...many color photos and drawings to explain and expand on
the text. ...the book will also serve as an in-house training guide
in design offices with the lessons it offers on stair terminology
and construction methods. It offers great value for the price."-Wood Design & Building. 128 pages. Softcover.
#8101-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
•
•
•
•
•
•
•
•
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
Framing Basics
Motor Amp Draw: 9 Amps (220V)
One 6” or two 4” hose connections
Bag Size (Dia. x depth): 19" x 33" (2)
Air Suction Capacity: Approx. 1550 CFM
Standard Bag Filtration: 30 Micron
Approx. Shipping Weight: 130 lbs.
Framing Basics offers a helpful introduction to framing for do-ityourselfers...Peters covers tool-use, materials, methods of work, and
demolition in easily understood text supplemented with numerous
color photographs....is well written and is geared toward the beginner; with other titles in Sterling's "Basics" series, it deserves a place
in most public library collections."--Library Journal. 128 pages.
Softcover.
#5899-5
#W1666
#D1795
#D1796
#D3116
Shop Fox 1-1/2 HP Dust
Collector
•
•
•
•
•
•
•
•
$ 275.00
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
The Builder's Book of Bathrooms
1-1/2 HP, 1 phase, 110V motor
Motor amp draw: 16 Amps (110V)
One 6” or two 4” hose connections
Bag Size (Dia. x depth): 19" x 33" (2)
Air Suction Capacity: approx. 1280 CFM
Standard Bag Filtration: 30 Micron
Approx. Shipping Weight: 120 lbs.
Building -- renovating -- repairing -- improving. Here is a comprehensive handbook on bathroom design and construction for
builders at all levels of experience. Written by experienced
remodeler and Fine Homebuilding magazine contributing editor
Andrew Wormer, this book gives essential information for every
type of bathroom project. 224 pages. Hardcover.
#70343
. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.95
Painting and Finishing
$ 239.00
#W1685
#D1795
#D1796
#D3116
A practical painting and finishing guide for the homeowner
Painting and finishing around the home can be daunting, both
from the scale of the work and the bewildering array of finishing
options available. But you can save yourself frustration, time, and
money with the help of Build Like a Pro: Painting and Finishing.
Written by a finishing professional, it’s an authoritative and
practical guide to accomplishing the major finishing tasks around
the home. 176 pages. Softcover.
#70603 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
Monday - Friday
38
Dust Collection Accessories
Blast Gates
A blast gate enables
you to maximize your
dust collection system
efficiency by allowing
you to control air flow
from one machine to
another. Available
both in plastic and
aluminum.
4” inside diameter on one
side and 4” outside diameter on the other to quickly
provide an airtight fit.
Seven-step adapter provides a multitude of dust
collection reducing
options. Simply cut
away unneeded steps
with a hacksaw. Outside
diameter step sizes
include 1”, 2”, 2-1/2”,
#W1039
3”, 4”, 5”, and 6”.
Aluminum Blast Gates
#W1141
#W1142
4” Plastic Quick Disconnect
Universal Adapter
3” Outlet . . . . . . . . . . . $ 10.95
4” Outlet . . . . . . . . . . . $ 12.95
$ 5.95
Reducers
3”
4”
5”
6”
Outlet
Outlet
Outlet
Outlet
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 5.49
$ 6.49
$ 7.95
$ 9.95
Plastic Dust
Collector
Hose
3”
3”
4”
4”
4”
5”
to
to
to
to
to
to
2” reducer . . .
2-1/2” reducer
2-1/4” reducer
2-1/2” reducer
3” reducer . . .
4” reducer . . .
2”Diameter x 10’
2-1/2" Diameter x 10'
3" Diameter x 10'
4" Diameter x 10'
4" Diameter x 10' CLEAR
4" Diameter x 20'
5" Diameter x 10'
$ 10.95
$ 12.95
$ 13.95
$ 14.95
$ 14.95
$ 27.95
$ 23.95
For increasing 1-1/2”
hose to 2-1/2”
#39335
.
.
.
.
.
.
.
.
.
.
.
.
$ 4.65/ft
$ 5.25/ft
$ 6.46/ft
$ 6.70/ft
$ 8.48/ft
$ 10.34/ft
Splice Fitting
Used to connect full sections of hose for longer runs
or to utilize short sections.
#W1018
#W1019
39
3” T-Fitting . . . . . . . . . . $ 4.95
4” T-Fitting . . . . . . . . . . $ 6.95
3” Elbow fitting . . . . . . . $ 4.95
4” Elbow fitting . . . . . . . $ 6.95
Universal Dust Port
Threaded end fits 1-1/2” OD
hose with step-down adapter
(1” ID / 1-5/16” OD)
#39341
Step Adapter
.
.
.
.
.
.
#W1012
#W1013
$ 8.16
Our premium quality dust collector hose is manufactured from natural rubber and wire reinforced. Sold in 5' increments. Priced per foot.
..
.
..
..
..
..
T-Fitting
#W1016
#W1017
Threaded end fits 1-1/2”
OD hose with adapter
steps of 7/8” ID, 1-1/16”
ID, and 1-3/16” ID
#39342
$ 21.00
2” diameter . . .
2-1/2” diameter
3” diameter . . .
4” diameter . . .
5” diameter . . .
6” diameter . . .
3” Wye branch . . . . . . . . $ 4.95
4” Wye branch . . . . . . . . $ 6.95
Elbow Fitting
Natural RubberWire Reinforced
Dust Collector
Hose
#FH-2
#FH-2.5
#FH-3
#FH-4
#FH-5
#FH-6
. . . . . . $ 3.95
. . . . . . $ 4.95
. . . . . . $ 5.50
. . . . . . $ 5.49
. . . . . . $ 3.95
. . . . . . $ 3.95
Hose Adapters
Our flexible dust collector hoses are specifically
designed for your dust collection needs (2-1/2"
hose is the standard diameter for shop vacs).
#W1026
#W1027
#W1028
#W1031
#W2031
#W1032
#W1033
#W1020
#W1041
#50-482
#W1044
#W1011
#W1037
Wye Branch
#W1014
#W1015
Plastic Blast Gates
#W1006
#W1007
#W1008
#W1009
$ 4.95
#W1038
$ 13.61
Floor Sweep
Use in conjunction with our 4" blast gate; open
gate and sweep dust in. Attach to floor with double sided tape or duct tape. ABS plastic.
Step adapter steps down
three times from 1-3/8”
ID to 7/8” ID.
#921072K13
Fits over a 3" hole and is easily
attached with double sided tape
or screws. Outlet diameter is 21/2" so it will fit most home shop
vacuums.
$ 5.49
#W1042
$ 3.10
Vacuum Hose
$ 9.95
#W1003
Steel Band Hose Clamps
10’ - attaches to
standard 1-1/2”
shop vac line
#W1021
#W1022
#W1023
#W1024
#39332
Wire Hose Clamps
$ 25.00
3” Splice fitting . . . . . . . $ 3.95
4” Splice fitting . . . . . . . $ 4.95
#W1316
#W1317
#W1318
3”
4”
5”
6”
3”
4”
5"
Monday - Friday
$ .79
$ .89
$ .99
$ 1.09
$ .89
$ .95
$ 1.29
Dust Collection Accessories • Air Cleaner
Dust Collector Separator
Just fit the dust collection separator
onto any standard 32 gallon metal
trash can between your machinery
and dust collector system. Automatically removes heavy wood chips.
Ideal when connected to planers and
other machinery that create high volumes of wood waste.
# W1049
$ 34.95
Mini Dust Collection Separator fits any 5 gallon bucket. Use
with 2-1/2” diameter hose for shop vacs.
#W2049
Mini Collector . . . . . . . . . . . . . . . . . $ 22.95
Shop Fox 3-Speed Air Cleaner with Remote
• Motor Speeds: Low 750 RPM,
Medium 960 RPM, High 1200 RPM
• High Speed Sound Rating: 69 dB
• Air Flow at High Speed: 1044 CFM
• Primary Filter: 5-Micron , Pleated
Type
• Secondary Filter: 1-Micron, Bag Type
• Shipping Weight: 64 lbs.
2-1/2" Hose Adapter
This fitting allows you to use standard 2-1/2"
dust collection hose directly with standard
shop vacs. A 2-1/2" dust port is standard on
many makes of bandsaws, belt sanders and
other woodworking machines. Use with
above Mini Collector.
#W2046
#W1690
$ 229.00
#D3209
#D3210
1 Micron Inner Filter . . . . . . . . . . . . . . . . . . . . . . .$ 29.95
5 Micron Outer Filter . . . . . . . . . . . . . . . . . . . . . . .$ 17.95
Hose Adapter . . . . . . . . . . . . . . . . . . . $ 5.49
110V Remote Dust Collector Switch
Dust Collection Hood
This fully adjustable Dust Collection Nozzle fits any 4”
flexible hose attached to a dust collector and provides a
quick and easy pick-up source for dust producing
machines. 1-1/8” x 12-1/2” wide nozzle rotates 360°
and can be angled 180° in any position between straight
up and straight down. Stable stand adjusts from 24” to
43-1/2”, making it ideal for portable power tools.
#D2267
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.95
This remote switch allows you to
turn your dust collector on and off
from anywhere in your shop up to 75
feet away, saving you trips to your
dust collector whenever you operate
a shop machine. Includes two controls with 9 volt batteries. For use
on 110 volt dust collectors up to 11/2 HP.
#D3038
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 44.95
Table Saw Dust Hoods
Fits most 8", 10" and 12" contractor type table
saws. Very popular with contractors because they
can be permanently attached to the saw without
adding excessive weight. Outlet diameter is 4".
Hose Hanger
Support flexible hose anywhere with this hose
hanger. Fasteners not included. 4-1/4”
Diameter.
#D2107
#W1004
#W1005
12-1/4” x 12-1/4” Overall size . . . . . . . . . $ 9.95
14-1/16” x 14-1/16” Overall size . . . . . . . $ 11.95
Jointer Dust Hoods
Fits most jointers on the market today. Model
W1001 fits over a 6-1/2" x 6-1/2" chute and
W1002 fits over a 7" x 8-1/2" chute. Outlet
diameter is 4".
#W1001
#W1002
. . . . . . . . . . . . . . . . . . . . . . . . . $ .60
Grounding Kit
This kit will allow you to ground your dust collection system to reduce static electricity and fire hazards. Kit
includes 50' of 14 gauge copper wire, grounding screws,
terminals, drill bit and instructions.
#W1053 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
8-1/4” x 8-1/4” Overall size . . . . . . . . . . . . . $ 5.95
8-7/16” x 10-1/4” Overall size . . . . . . . . . . . $ 6.49
6 “ Universal Dust Hood
Fits over a 4-1/2" hole and can be adapted to many
woodworking tools. Use it on band saws, table saws,
shapers, sanders, etc. A very cost effective way of solving a messy problem. Outlet diameter is 4".
Dust Collection Basics Handbook
This book will guide you through all the steps in connecting
your home shop dust control system. Tips on design, layout
and construction. A must read book if you want total dust
control in your shop! 60 pages. Softcover.
#W1050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.95
#W1010 6-1/4” x 6-1/4” Overall size . . . . . . . . . . . . . . . . . . $ 5.95
Monday - Friday
40
Shop Accessories
Brass Hammers
Stanley Chisels
Beautifully polished brass hammers provide mass for friendly
persuasion, yet won’t mark harder metals. Perfect for metalworkers and machinists making delicate adjustments and
for woodworkers using wood handled chisels.
• Extra long, shatter resistant handle
designed for balance and grip
• Heavy-duty strike caps are crowned for centering blows and durability
• Precision ground cutting edge
• Blade and tang forged from one piece of high quality, cutlery grade
steel
• 9” overall length
#D2795
#D2749
#D2750
8 oz . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.90
16 oz . . . . . . . . . . . . . . . . . . . . . . . . $ 17.00
32 oz . . . . . . . . . . . . . . . . . . . . . . . . $ 21.90
Dead Blow Hammers
Unlike rubber mallets, dead-blow hammers
won’t bounce off your work. Sealed lead shot
in the hammers head delivers all the kinetic
force to the contact point.
#D1085
#D1086
#D1087
16 oz . . . . . . . . . . . . . . . $ 13.95
24 oz . . . . . . . . . . . . . . . $ 19.95
32 oz . . . . . . . . . . . . . . . $ 24.95
4-Piece Nail Set
These case hardened nail sets are conveniently packaged
in sets of four tip sizes. Bright fluorescent colors identify which nail set is which and pretty much guarantees
they won’t end up lost. Tip sizes include 1/32”,
1/16”, 3/32”, and 1/8”.
#D2530
#16-903
#16-904
#16-905
#16-906
#16-907
#16-908
#16-909
#16-910
#16-911
1/4” wide chisel . .
1” wide chisel . . .
1-1/4” wide chisel
1-1/2” wide chisel
2” wide chisel . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. $ 8.65
. $ 8.95
. $ 8.95
. $ 8.95
. $ 8.95
. $ 9.95
. $ 10.95
. $ 11.95
. $ 13.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.95
5-Piece Pin Punch Set
6-Piece Scraper
Set
Remove tool marks and
prepare wood surfaces for
finishing better than
sandpaper with this 6piece scraper set. Includes fine, medium and heavy cutting rectangular
scrapers, concave/convex scraper, gooseneck scraper and beveled edge
scraper. To renew cutting edges, simply joint the edge flat with a file and
burnish to form a slight hook angle. Two of the scrapers have rounded
edges to prevent accidental “digging” in your work.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 10.95
Burnishers
Burnishers are for sharpening hand and cabinet scraper blades. Both
styles include handle and are approximately 9-1/2” in overall length.
Oval blade . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.45
Round blade . . . . . . . . . . . . . . . . . . . . . . . . . $ 15.75
Made of premium chrome vanadium steel. Hardness
of 50-60 Rc. Hardwood handles. 10” overall
length. In wooden case.
#WC104 4-piece set includes 1/4”,
1/2”,3/4”, & 1 ” chisels . . . . . . . $ 59.95
#WC106 6-piece set includes 1/4”,3/8”,
1/2”,5/8”,3/4”, & 1” chisels. . . . $ 79.95
#WC110 10-piece set includes 1/4”,
5/16”,3/8”,1/2”,5/8”,3/4”,7/8”,
1”,1-1/4”, & 1-1/2” chisels. . . . . $ 129.95
#D2261 . . . . . . . . . . . . . . . . . . . . . . $ 7.95
41
.
.
.
.
.
.
.
.
.
• Durable storage and
carrying case
#16-900 3-piece set includes 1/2”,3/4”,
& 1” chisels. . . . . . . . . . . . . . . . $ 26.95
3/4”,1”,1-1/4”, & 1-1/2” chisels . . . . . . . . . . . . . . . . . . . . . . . $ 56.95
1/2”,5/8”,3/4”,1”,1-1/4”,11/2”, & 2” chisels. . . . . . . . . . . $ 86.95
This 5-Piece Pin Punch Set features centerless, ground tips and includes 1/8", 3/16",
1/4", 5/16" and 3/8" punches.
#520-5080
#520-5090
.
.
.
.
.
.
.
.
.
Stanley Chisel Sets
Freud Chisel
Sets
#D3294
.
.
.
.
.
.
.
.
.
Amana 3-Piece Chisel Set
The bevel edge chisel sets are made of high carbon tool steel.
Blades are hardened, tempered, ground, honed and are blackoxide treated to prevent rust. Handles are made of high
impact, virtually unbreakable polypropylene plastic.8”overall
length.
#A-3380 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.95
Cabinet Scrapers
Made from the finest steel. Ideal tool
for refinishers. Regular rectangle,
curved on opposite ends, and the classic “gooseneck” shape. 3-piece set
includes 0.8mm rectangle, curved, and
gooseneck scrapers.
#520-5010
#520-5060
#520-5070
#520-5510
0.8 mm rectangle .
Curved . . . . . . . . .
Gooseneck . . . . . .
3-Piece set. . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Monday - Friday
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. $ 3.90
. $ 5.20
. $ 6.70
. $ 15.70
Shop Accessories
6-Piece Diamond Cutting Disc Set
These 180 grit diamond cutting
discs can cut through steel,
stone, glass or practically anything. Very useful for anyone
with a rotary grinder. Comes
complete with two arbors. 1/8”
shank.
3-Piece Wood Rasp Set
#D2472 . . . . . . . . . . . . . . . $ 10.95
#D3113 . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
This 3-piece wood rasp set with rubber handles
includes round rasp, flat rasp and half-round
rasp. Ideal for wood carvers. Aggressive teeth
remove wood fast for any wood shaping need.
Rasps measure 12” overall.
40-Piece Mini Grinding Polishing Set
This set contains 20 assorted vitrifiedbond aluminum oxide stones, including
four different grits. Ten assorted cotton
buffs and ten assorted rubberized abrasives complete this package. 1/8”
shank.
#D2698
. . . . . . . . . . . . . . . . . . . . . $ 29.90
6-Piece Rasp File Set
Sure-grip rubber handles make
this 6-piece rasp file set a
pleasure to use. Set includes
round rasp file, square rasp file,
half-round rasp file, triangular
rasp file, flat rasp file and tapered flat rasp file. Rasp files
measure 12-1/4” overall.
#D3112
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 18.95
50-Piece Diamond Burr Set
Large and small burrs in this set make it
possible to craft nearly every angle and
shape that a project requires. Comes in a
plastic case. 1/8” shank. 180 Grit.
#D2474
. . . . . . . . . . . . . . . . . . . . . $ 49.95
20-Piece Mini Diamond Burr Set
File Card and Brush
Clean rasps and files cut faster and save
time. One side has a file card that quickly
removes tough imbedded filings and the other
has stiff bristles.
#D2658
This set of 150 grit diamond burrs features just about every profile needed for
most grinding and sharpening applications including: ball, cone, taper and
cylindrical. 1/8” shank. 150 Grit.
. . . . . . . . . . . . . . . . . . . . . $ 5.95
8-Piece Riffler Rasp Set
For carving and working around tight areas, this Riffler Rasp
Set features eight double-ended profiles for just about any
shaping and profiling requirement. Aggressive tooth cut
removes wood fast and efficiently. Every woodworker needs a
set of these. Each rasp in this set measures 7-1/2” long.
#D2471 . . . . . . . . . . . . . . . . . . . . . . . $ 8.95
#D2476
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.95
10-Piece Diamond Burr Set
Great for “roughing in”, these 150
grit burrs are built to withstand heavy
pressure. This provides the rugged
strength needed for quickly clearing
waste portions of a project. 1/4”
shank.
#D2470 . . . . . . . . . . . . . . . . . . . . . . . $ 8.95
Setting Tile Book
The author covers the many types of tile -- including natural
stone. He explains tools, setting materials, preparation and layout. You'll also find detailed information on troubleshooting problems and making repairs. The traditional mortar-bed method is
still covered, but easy-to-use backerboard and waterproofing
membranes now get special attention. Byrne delivers all the
basics tilesetters rely on...plus all the fresh ideas and innovative
methods they need to do the job right. 260 pages. Softcover.
#70209
10-Piece Needle Nose File Set
This needle nose file set with vinyl grip
handles includes ten profile shapes
including round, half-round, flat, triangular, knife-edge, square and oval. All tips
except the square nose flat file taper to a
needle nose point for reaching into tight spots.
Each file measures 7” long.
#D2868
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
6-Piece Needle File Set
This set includes an assortment of oval,
flat, half round, round, triangular and
square files with comfortable grips. Files
measure 7” long.
#D2252 . . . . . . . . . . . . . . . . . . . . . . . $ 5.95
Monday - Friday
42
Shop Accessories
Virutex Double Edge Trimmer
The Very Efficient Carpenter
Basic framing for residential construction. Here's your chance to
become a more efficient carpenter. Larry Haun has been a production framer for more than 35 years and a teacher of apprentices for more than 20. In this book, Haun shows you, step by
step, all the techniques he uses to frame a basic house, from laying down the sills to cutting the rafters. 213 pages. Softcover.
Trims both sides of the board simultaneously so you can cut your trimming time
in half. For edges up to 1.5" or 40 mm
wide. For wider edges, it can be used
as an independent one side trimmer.
#AU-93
#AU-93B
#70455
Double Edge Trimmer . . . . . . . . . . . . . . . . . . . . $ 12.95
Set of replacement knives . . . . . . . . . . . . . . . . $ 6.95
Virutex Edge Trimmer
Manual end trimmer. It allows a perfect, clean and high quality cut on all
the corners of the board. No other finishing operations are needed.
Equipped with double sided blades.
. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 22.95
Windows & Skylights
Installing, building, and renovating. If you plan to cut a hole in a
perfectly good wall or roof, you'd better have sound advice on
how to go about it. This collection of 25 Fine Homebuilding articles won't disappoint you. You'll learn how to choose the best
new windows, restring double-hung windows and install and build
skylights. You'll also learn how to build shutters and window
frames and install casement, bay and arch-top windows. 112
pages. Softcover.
#70265
#RC21E . . . . . . . . . . . . . . . . $ 37.50
. . . . . . . . . . . . . . . . . . . . . $ 14.95
Framing Floors, Walls, & Ceilings
Hand Edge Banding Iron
A solidly constructed frame is the key to a well-built house.
These 27 articles from Fine Homebuilding will explain how to
frame major building components, put up walls straighter and
faster, build solid squeak-free floors, and how efficient planning
and layout techniques can save time and money. Tradesmen and
homeowners alike will build better using these framing tricks,
methods and solutions. 144 pages. Hardcover.
For edge banding pre-glued tapes. Features quick
heat up time, thermostat, wood handle and heat
resistant base.
#HI165 . . . . . . . . . . . . . . . . . . . . . . . . . . $ 52.95
#70656 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
Great for installing laminate, carpet, counter
tops, sheer vinyl, wall
panels and veneer.
Three 2-1/4” rubber
rollers for dependable
traction and 7-1/2” of non-marring coverage. Sturdy cast handle for
increased leverage. Extends from 20” to 35” with twist locking action.
Extension Roller
Smart Business for Contractors
You are a contractor. You know your trade, and you're good at it. But
what about the unique financial and legal concerns of running a construction business? Do you have the right tools for dealing with
money and the law? Attorney Jim Kramon provides all the information you need to turn your hard work into greater financial security.
208 pages. Softcover.
#70538
#D3211
Foundations & Concrete Work
Edge Roller
Essential information from builders, masons, and engineers.
Whether you are planning to build a new foundation, shore up an
old foundation, or pour a new driveway, this book will provide you
with the professional guidance you need to do the job right. In
these collected articles from Fine Homebuilding magazine, professional builders, masons, and engineers show you how. 144 pages.
Softcover.
Features two 1-3/16” perpendicular mounted
rollers. Perfect for gluing tight edges on laminate and veneer projects. Hard plastic rollers
will not scratch most surfaces. Ergonomic handle is designed for a sturdy grip.
#D3215
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
Pressure Roller
For veneer or plastic laminate. 3” x
1-1/2” black rubber roller. Two vinyl
ribbed grips. 1/2” zinc plated steel
handle.
#JR3
. . . . . . . . . . . . . . . . . . . . $ 11.95
“J” Rollers
#70459
Inside this gigantic manual, with more than 900 diagrams, illustrations and photos, and over 600 pages of information, are all the
major methods of construction, following professional classifications.
Hundreds of topics extend from general requirements so important for
architects, engineers, and contractors; through analysis of building
sites; to the mechanics of fire protection, plumbing, valves, insulation, and refrigeration. In-depth studies cover construction materials
and special construction. 608 pages. Softcover.
#6851-6
43
1-1/2”
1-1/2”
3-1/2”
3-1/2”
wide
wide
wide
wide
poly roller
steel roller
poly roller
steel roller
.................
.................
.................
.................
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
Encyclopedia of Construction Methods & Materials
Designed for applying pressure on veneer and
plastic laminates. Reaches into corners as roller
has no axle projection on one end. Stainless
steel or polyethylene roller.
#19595
#19596
#19597
#19598
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
Inspecting a House
$ 14.95
$ 24.95
$ 15.95
$ 33.95
In this heavily illustrated guide, master plumber, electrician and
inspector Rex Cauldwell offers insights from his years of experience,
presenting a rational sequence of inspection so that nothing gets
missed. Whether it’s an overloaded electrical panel, a driveway that
sends water into the basement when it rains, or a gas furnace that’s
improperly vented, Cauldwell shows you how to spot and evaluate
areas of concern. 272 pages. Softcover.
#70569
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
Monday - Friday
Shop Accessories
4-Piece Spatula Set
Barber Scissors
This 4-piece spatula set features eight
different tip profiles for scraping and
shaping a variety of materials. Knurled
handles provide excellent grip control.
Polished brass finger loops and precision ground matte steel finish cutting
edges make these scissors highly decorative and functional. Blade length is
2-3/4” and overall length is 7-5/8”.
#D3235
. . . . . . . . . . . . . . . . . . . . . . $ 9.95
#D3223 . . . . . . . . . . . . . . . . . . . . $ 8.95
4-Piece Dental Pick Set
Utility Scissors
This stainless steel Dental Pick Set is
perfect for a variety of uses around the
shop - whether restoring cut threads or
fine scribing. Each pick features two
different pick styles, a knurled handle
and measures 6-1/2” long.
#D3228
These all-purpose scissors are perfect in
the school, home or shop. Offset handles make shearing paper and fabric a
breeze. Blades measure 3-1/8” and
scissors measure 8-1/2” overall.
#D3226
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.95
. . . . . . . . . . . . . . . . . . . . . . $ 1.95
All Purpose Utility Scissors
Magnifying Tweezers
Three-X magnifying glass and needle-tipped
tweezers combine to make this one of the
handiest items in the tool box or first aid kit.
#D3234
. . . . . . . . . . . . . . . . . . . . . . . . . $ 4.50
Not just for the kitchen. Large finger loops,
ultra sharp cutting edges and curved plier
jaws make these handy Utility Scissors ideal
for the shop too. Blades measure 3” and
scissors measure 8-1/2” overall.
#D3223
6-Piece Tweezer Set
Smith & Wesson® Mag Tool
This 6-piece stainless steel tweezer
set includes every shape and size
needed for the workshop including
blunt tip, tapered point, fine-tipped,
bent and reverse action. Sizes range
from 5” to 6-3/4” long.
#D3288 . . . . . . . . . . . . . . . . . . . $ 12.95
5-Piece Spatula Set
These variously shaped spatulas
are ideal for cleaning up glue
squeeze-out, applying wood
putty and spreading glue and
thicker epoxies. Each blade has
a different degree of flexibility
for unsurpassed control. Great for finishing and refinishing too.
#D3168
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
Without a doubt, the best multi-tool
around. Aside from its superior quality,
the 44 Mag Tool is the only one to feature
a diamond file. Features: needlenose pliers, wire cutters, crimpers, scissors, bottle
opener, can opener, 1/8", 3/16", 1/4"
straight & Phillips type screwdrivers, diamond file, awl, lanyard,
regular blade, serrated blade and criss-cross saw. Deluxe
Cordura sheath included
#SW1010
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.95
Smith & Wesson® Tool Chest II Multi Tool
This 24-function Multi Tool features so
many tools, it's just like having a tool
chest on your belt. Includes 11 screwdriver bits and Cordura nylon sheath. Includes:
Needlenose pliers with wire cutter, 3/16"
Straight screwdriver/bottle opener, Scissors, File,
Dual scale ruler, Can opener/awl, Phillips screwdriver, Drop point blade, Hex bit holder/1/4" socket.
#SW1057 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
Slickplane
Our Slickplane produces an exceptionally
smooth 1/8" radius or a 45° chamfer over the
entire length of an edge. Crafted from rock
maple, the Slickplane is designed to fit comfortably in your hand. A brass sole glides easily along the workpiece edge as two independently adjustable carbide-tipped cutters apply the finishing touch.
#W1100
#W1101
#W1102
. . . . . . . . . . . . . . . . . . . . . . . . . $ 8.95
Slickplane w/ radius cutter. . . . . . . . . . . . . . . $ 15.95
Pair carbide radius blades . . . . . . . . . . . . . . . $ 7.95
Pair carbide chamfer blades. . . . . . . . . . . . . . $ 7.95
Complete Book of Wood Joinery
Learn the joinery techniques that are essential to fine woodworking,
including butt joints, dadoes and grooves, rabbet, miter, lap, mortise-tenon, edge-to-edge, dovetail, and many more. Practice by making a variety of pieces, such as a built-to-last bedroom chest, bookcase, kitchen base cabinet, trestle table, pedestal table, dining
chair, and rocking chair. 320 pages. Softcover.
#9950-0
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 17.95
Monday - Friday
44
Shop Accessories
SharkSaw® Super FineCut Saw
SharkSaw® Dowel Cutting Saw
This saw features the
thinnest blade
(kerf 0.004”) of the
entire SharkSaw line, and
is supported by a spine for stability. With its extremely small tooth set
(19 tpi), this saw can make exceptionally smooth, fine cuts in a variety of
woods. Specifically, it’s great for cutting through extremely hard woods such as
oak, ebony, and exotic imported species such as ironwood.
This very flexible saw is made
for flush cutting of dowels and
woodworking plugs. The extremely fine tooth-pitch (26 per inch) makes for
an ultra-smooth cut; it’s ideal for precision joinery like dovetails, small
moldings, and picture frames. It can also cut through small plastics.
#10-2410
#01-2410
10-5/8” Super fine cut saw. . . . . . . . . . . . . . . . $ 22.20
Replacement blade . . . . . . . . . . . . . . . . . . . . . . $ 15.95
SharkSaw® Fine Cut Saw
This saw combines the
character of the 14 pt
General Carpentry Saw
with the FineCut saw. It cuts fast, yet it’s smooth enough for fine
woodwork. It handles like the Super FineCut Saw (10-2410), but with a
15 pt (teeth per inch) pitch that can accommodate most hard and soft woods.
It’s also great on plastic pipe.
#10-2420
#01-2420
10-5/8” Fine cut saw . . . . . . . . . . . . . . . . . . . . $ 18.95
SharkSaw® Miter Saw
This saw is designed
especially for manuallyoperated miter boxes.
The 14” blade has 18 teeth/inch, for a smooth, fine cut, with a
narrow kerf for minimal stock removal. It’s designed to make degree
cuts in all types of wood moldings (from crown moldings to intricate decorative ones). Sawing is so smooth, that sanding is often not required. It
also makes a great general carpentry saw and also cuts cleanly through plastic pipes such as PVC and ABS, up to 10” in diameter.
#10-2210
14” Miter saw . . . . . . . . . . . . . . . . . . . . . . . . . $ 18.75
SharkSaw® General Carpentry Saw
This is the bar-none best
saw for dimensional
lumber, thick plywood and
wallboard and treated lumber of all sizes. You’ll be amazed how easily and smoothly it carves
through PVC and ABS pipes. Because it’s a pull-to-cut saw, undercutting (that is, cutting from the bottom up) is a snap - quite the opposite of
traditional push-saws! 10 teeth per inch.
#10-2315
#01-2315
15” General carpentry saw . . . . . . . . . . . . . . . . $ 23.40
SharkSaw® Fine Cut Double Saw
#10-2204
#01-2204
6-1/2” Dowel cutting saw . . . . . . . . . . . . . . . . . $ 12.75
Dowel Cutting Saw
High carbon, spring steel saw blade and zero edge
set makes flush cutting a breeze. This Japanese
style saw cuts extremely fast on the pull stroke for
unsurpassed control and 26 teeth per inch produce
a fine finish that requires little or no sanding.
#D2055
. . . . . . . . . . . . . . . . . . . . . $ 9.95
SharkSaw® Drywall Saw
The SharkSaw drywall
saw is the only SharkSaw that cuts on
the “push.” With its stiff, sharply pointed blade, it easily plunges through drywall, while its push-to-cut design eliminates tearing of drywall paper on the
exposed side. 7 teeth per inch.
#10-2206
6” Drywall saw . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.50
SharkSaw® General Carpentry Saw
This is the best allaround saw for professionals and do-it-yourselfers alike. With 14
teeth per inch, it cuts very fast and smooth. This is the best saw for
tackling the widest range of projects: everything from rip and crosscut to flush-cutting moldings and door casings even slicing through PVC or
ABS pipe. And at 18” overall length, it fits into most tool boxes.
#10-2312
#01-2312
12” General carpentry saw . . . . . . . . . . . . . . . . $ 18.25
English Dovetail Saw
This 8” blade dovetail saw
has a very fine nineteen teeth
per inch configuration. With
the premium high polished
brass back, this saw makes cutting dovetails and other small joints a pleasure.
#645-1000
8” blade, 19 TPI . . . . . . . . . . . . . . . . . . . . . . . $ 22.50
Freud Mini Brass Back Gents Saw
An excellent jamb saw! This is the traditional Japanese saw. The Fine Cut
Double Saw has cross cut teeth (17 per inch) to work across the wood grain,
and rip teeth (9 per inch) to cut with the grain. This unique Japanese
design has been used to build everything from houses to castles to shrines.
Although the blade is very flexible, it cuts exceptionally straight. It is
designed for applications where precision outweighs speed. Many professionals use this tool as a jamb saw for cutting door moldings and casing
coverings.
#10-2440
#01-2440
45
9-1/2” Double cut saw . . . . . . . . . . . . . . . . . . . $ 21.95
This saw has very small, fine
teeth, ideal for light intricate
bench work. The back of the
blade is ground thinner to
reduce the risk of blade binding. This also reduces “set” so you will get a finer cut with less effort. 15
teeth per inch, 6” blade length.
#GS006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monday - Friday
$ 13.95
Shop Accessories
HVLP Spray Gun with Regulator
Deluxe Tool Belt with Padded Suspenders
This tool belt features deep pockets, generous padding, ballistic nylon construction,
sturdy metal buckle and ergonomic shoulder straps. Also features quick-release
metal clips for tool pouches and shoulder
straps. 16 pockets, 10 pencil/tool sleeves
and 4 holsters (3 ballistic nylon and 1 hammer holster.
Nothing compares to an HVLP spray gun
when it comes to applying professional looking results. This spray gun features an air
adjusting valve, an external regulator, a
1.4mm nozzle, and a corrosion resistant
chrome finish. Regulator comes with an
easy to read dial and 1/4” NPT
connections.
#D3274
#D3279
HVLP gun . . . . . . . . $ 54.95
Regulator only . . . . . $ 16.95
#D3267
. . . . . . . . . . . . . . . . . . . . . . . $ 64.95
Professional’s Tool Organizer
Air Filter / Regulator / Lubricator
This combo unit is great for controlling air
pressure, trapping moisture and cleaning air in
pneumatic systems. 150 PSI maximum pressure. Locking control knob and an easy to
read pressure gauge. Also includes a micro-fog
lubricator and a handy wall mounting bracket.
Not for use with spray guns. Accepts 1/4”
NPT fittings.
#D3272
This bag features 43 total pockets (6 of which are completely
closable), a steel reinforced handle, hammer / attachment loop,
removable belt pouch and
adjustable shoulder strap.
Constructed of ballistic nylon
with stitched and riveted seams.
#D3289 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 32.95
Handy Shop Bag
Air Hoses
#D3283
#D3284
#D3285
These air hoses are ideal
for keeping work areas
neat and tidy. D3285
has 25’ of high quality
retractable hose that has
been pressure tested to
250 PSI. Hose connections are 1/4” NPT.
25’ Coil Hose . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.95
50’ Coil Hose . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.95
25’ Retractable Air Hose . . . . . . . . . . . . . . . . . . $ 69.95
17-Piece Air Accessory Kit
This 17-piece kit includes pressure
gauge, inflating nozzle, two gun tips,
inflating needle, dual tire chuck, four
male quick connect coupler nipples,
two female quick coupler nipples, two
nipples, blow gun, couplings and quick
release coupler. 1/4” NPT fittings.
#D3287
This little shop bag is packed with big features like 11 deep pockets, 10 pencil /
tool sleeves, large padded handles, heavyduty zipper and ballistic nylon construction. Interior measures 8”W x 13”L x
10”D when unzipped and fully opened.
#D3268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
Deluxe Shop Bag
Perfect for the mobile craftsman who
has a tool for everything. The deluxe
shop bag features 18 easy access
pockets, ballistic nylon construction,
huge carrying capacity and an optional shoulder strap that quickly clips
on or off. Interior measures 9-1/2”W x 17”L x 12”D when
unzipped and fully opened.
#D3269 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 16.95
Blow Guns
Perfect for cleaning dust
and dirt from nooks and
crannies as well as blowing
#D2908
off solvents after cleaning
parts for assembly. Heavy#D3280
duty guns feature solid
die-cast construction and (Heavy-duty)
are rated at 180 maximum PSI. 1/4” NPT.
#D2908
#D3280
#D3281
Shop Apron
This bib-style apron protects the front torso
from dust and chips and provides numerous
handy pockets for holding tools, nails, pencils
and hardware and two hammer loops. Made
from ballistic nylon, this apron is fully
adjustable for one-size-fits-all convenience.
#D3115
. . . . . . . . . . . . . . . . . . . . . $ 12.95
Angled nozzle blow gun . . . . . . . . . . . . . . . . . . . . $ 5.50
Heavy-duty gun 1” nozzle . . . . . . . . . . . . . . . . . . $ 4.95
Heavy-duty gun 4” nozzle . . . . . . . . . . . . . . . . . . $ 5.95
Monday - Friday
46
Shop Accessories
Depth Gauge
Adhesive-Backed Measuring Tapes
This 6” depth gauge
makes precise depth
measurements and
features a knurled lock
down screw, 1/32”
measuring increments with easy-to-read vernier scale and a
wide 3-1/2” base. Steel body makes this a pleasure to use.
Precision steel, ready to mount on cut-off
fences, table saws, or work benches. Tapes
can be easily cut to shorter lengths. In 6’ or
12’ lengths, 1/2” or 3/4” wide, reading leftto-right or right-to-left.
#79-056
#79-057
#79-061
#79-062
#79-065
#79-066
#79-068
#79-070
12’R 1/2” Metric/English . . . . . . . . . . . . . . . . . . .
12’L 1/2” Metric/English . . . . . . . . . . . . . . . . . . .
12’R 1/2” English . . . . . . . . . . . . . . . . . . . . . . . .
12’L 1/2” English . . . . . . . . . . . . . . . . . . . . . . . .
12’R 3/4” English . . . . . . . . . . . . . . . . . . . . . . . .
12’L 3/4” English . . . . . . . . . . . . . . . . . . . . . . . .
6’R 3/4” English . . . . . . . . . . . . . . . . . . . . . . . . .
6’L 1/2” English . . . . . . . . . . . . . . . . . . . . . . . . .
$ 14.19
$ 14.19
$ 14.19
$ 14.19
$ 19.00
$ 19.00
$ 13.00
$ 10.50
Precision Stop Block
Ideal for cutting multiple pieces to the
same size, this stop block also eliminates
marking and adjusting the workpiece to
the saw blade when cutting single pieces.
Features left and right side magnified
hairline cursors. Works with fences from
1-1/2” to 2” wide. Does not include
adhesive-backed measuring tape.
#W1109
Dial indicators are a necessity in any shop - woodworking and metalworking alike. Use them with magnetic
bases for measuring runout, setting up tool and checking alignment. Magnetic base has a very strong magnet that is easily activated with a convenient switch.
Mounts at any angle and has a fine adjustment arm.
1” travel x .001” indicator . . . $ 14.95
Magnetic base . . . . . . . . . . . . $ 20.50
Stainless Steel
Ruler
Dual pointer precision stop block . . . . . . . . . . . $ 49.95
Measure with absolute precision using this 12” stainless steel ruler with
increments as fine as 0.5mm and 1/64”.
#D2828
Precision caliper can measure
small part sizes and thickness
of everything from lumber to a sheet of paper. One-handed operation provides inside, outside and depth measurements in
precise .001" increments. Comes in a protective case.
6” Capacity dial caliper . . . . . . . . . . . . . . . . . . $ 34.95
Fractional Dial Caliper
This stainless steel fractional dial
caliper combines the same precision
that metalworkers are accustomed to with
a fractional scale for woodworkers. Perfect
for measuring board thickness, depth and
inside measurements. Dial reads 64ths
and .01”. Six inch capacity.
#D3208 . . . . . . . . . . . . . . . . . . . $ 39.95
Use this high quality 6”
caliper to measure thickness, inside and outside
diameters and depths in
1/32” increments with easy-to-read vernier scale. Thumb stud
and lock down screw ensures accurate readings every time. Steel
construction makes for a long lasting tool.
Vernier Caliper
#D2801
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.00
Dial Indicator and Magnetic Base
#D1057
#D1058
6” Dial Caliper
#D1052
#D2800
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 1.95
Steel Hook
Rulers
Available in 12”, 18” and 24” lengths, these hook rulers make easy work
of edge alignment. Measuring in increments of 1/16”.
#D2825
#D2826
#D2827
12” hook ruler . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.75
18” hook ruler . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 4.95
24” hook ruler . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
24” Aluminum Ruler with Handle
This multi-purpose ruler measures, levels, plumbs and provides a safe cutting edge, so hands and fingers are away from the cutting blade.
Graduations are in inches and millimeters / centimeters.
#D3197
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
24” Aluminum Ruler
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.00
Brass Caliper
Solid brass 4” caliper with
sliding dovetail way and rigid construction make this measuring instrument indispensable for any craftsman. Small size is
perfect for the tool box or a pocket. Measuring range is 0 to 4”/100mm in
1/16” or 1mm graduations. Includes vernier scale.
Use this aluminum ruler for all basic measurement needs. Machined to
exacting standards, this ruler will provide years of precise measurements.
Increments of 1/16” make this a truly versatile and precise tool for any
workshop.
#D2836
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.95
#D2732 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.00
47
Monday - Friday
Shop Accessories
Aluminum Squares
Plastic Protractor
These high-precision aluminum
squares are perfect for square
layouts and machine set-ups.
Each square features a heavyduty beam and beveled scale
with inside and outside graduations.
Measure any angle, bevel or slope. Long arm is 53/4” and the short is 3-1/4” long. Easy to read
scale with brass knob to lock in any position.
#D3068
#D3069
#D3070
#D3071
10”
12”
18”
24”
Aluminum
Aluminum
Aluminum
Aluminum
#19070 . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.95
square
square
square
square
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 9.95
$ 12.95
$ 14.95
$ 18.95
Precision Machine Squares
Precision made and ground, these are
square inside and out. Both blade and
stock are ground for straightness and
accuracy.
#885-1002
#885-1004
#885-1006
2” Engineers square . . . . . . . . . . . . . . . . . . . . $ 11.25
Incra’s new line of precision squares and 45°s
are so accurate, they guarantee them! The
innovative one-piece design uses the most
advanced manufacturing methods available to
carve out a single, monolithic blade / handle
body from a solid slab of hardened aluminum.
The hefty construction of the 1/4” solid alloy
body and the 3/4” thick integrated alloy handle
just feels right in the palm of your hand. The
45° unit can double as a square.
5-1/2” square . . . . . . . . .
7-5/16” square . . . . . . . .
5-1/2” 45° . . . . . . . . . . .
7-5/16” 45° . . . . . . . . . .
$ 36.95
$ 45.95
$ 36.95
$ 45.95
Rosewood Try Squares
Made from the best quality rosewood
and tempered steel blades, these squares have a brass face for
protection against damage and wear. The blade is securely held
by steel rivets with surrounding inlayed brass plugs.
#20130
#20135
#20140
• Use for making accurate 90° & 45°
markings, measuring and checking depth
• 12” stainless steel blade with 1/8”,
1/16”, 1/32” graduations
• Machined square head • Full view vial
• Self-aligning drawbolt • Hardened scriber
#0250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.95
Incra Guaranteed Squares & 45°s
#GSQR5
#GSQR7
#G455
#G457
Empire Heavy-Duty Professional
Combination Square
4” Rosewood square . . . . . . . . . . . . . . $ 14.95
6” Rosewood square . . . . . . . . . . . . . . $ 19.95
9” Rosewood square . . . . . . . . . . . . . . $ 22.95
Trammel / Circle Marking Set
For laying out large circles, this trammel/circle
marker set offers unsurpassed control and accuracy. Each trammel point with steel point or
replaceable lead is fully adjustable. Includes a
12” stainless steel ruler and extra lead.
#D2331 . . . . . . . . . . . . . . . . . . . $ 15.95
Wheel Marking Gauge
This simple, yet effective marking gauge
has a single bevel edge wheel that scribes
a fine line without tearing the wood fibers
and does not wander with the woods
grain. Precision ground brass shoe glides
against the edge of the workpiece and the knurled brass knob makes adjustments quick and easy. 8” long.
#D2822
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
Marking Gauge
Highest quality rosewood has brass wear strips on
the rubber face. One side is for marking mortises
and has a sliding adjustment mechanism. The
other side has a single pin which allows the tool
to be used as a traditional marking gauge. Also
features a knurled brass thumbscrew for locking the gauge in place.
#20150
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 26.95
Mite-R-Gage
This set is great for the woodworker and
includes square, center, and protractor
heads on a 12” blade.
Take the guesswork out of angles. Fully rotational through 360° , the Mite-R-Gage uses
two legs that allows you to measure both
inside and outside angles, transfer exact
angles direct to stock, check corners for
squareness or set alignment of radial arm or table saw. It can layout simple
or compound miters. Overall length of each leg is 11-1/2”.
#630-4200 . . . . . . . . . . . . . . $ 40.60
#605-1250
Combination Square Set
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
Monday - Friday
48
Shop Accessories
Contour Gauges
Professional contour gauge with plastic pins is
ideal for joinery work, fitting tiles, carpets,
linoleum, etc. Two gauges can be combined for a
longer length if necessary.
#800-2510 Plastic contour gauge . . . . . . $ 9.90
#837
Contour gauge w/ steel pins . . $ 8.15
Miter Squares
Finely made tools which are extremely useful for layout and machine setup. The miter
square (shown) checks 45° or 135° angles. The
combination square adds ninety degree capability
and useful markings.
#730-1050
#730-1060
Miter only square. . . . . . . . . . . . . . . . . . . . . . . $ 11.00
Combination 90° / 45° square. . . . . . . . . . . . . . $ 19.25
Sliding T-Bevel
Adjustable to any angle, use this fine tool for marking
or checking angles. The stock is made of rosewood
with brass fittings, while the tempered steel blade is
secured by a brass locking lever for easy thumb
control.
#605-3150
#20125
7-1/2” T-Bevel. . . . . . . . . . . $ 25.85
10” T-Bevel. . . . . . . . . . . . . $ 23.95
Angle Divider
This tool makes it easy to divide an angle
in half for accurate mitering as well as
transferring angles from 10° to 170°.
Makes finish carpentry significantly easier
and faster. Commonly used angles are
marked for ready reference.
#19050
Stabila Torpedo Level
with Adjustable Vial
• Reads plumb, level, and 360 deg
(P-L-360).
• Protractor vial (tolerance +/- .5
deg) duplicates angles in percent or degrees.
• Protractor vial reads in 2 deg increments.
• Patented, epoxy-locked vial system never needs adjusting.
• Full-length magnetic strip recessed in the measuring surface.
• Two crystal clear, non-fogging, unbreakable, monoblock, acrylic vials (one
horizontal and one vertical).
• Certified fixed vial accuracy: (1/16" over 72")
#21999
10” Torpedo level . . . . . . . . . . . . . . . . . . . . . . . $ 21.95
Stabila Torpedo Level
• Heavy-duty, die-case frame is virtually indestructible.
• Certified Level Accuracy; in top read position: (1/32" over 72").
• Strongest magnets - Work Hands-Free.
• Patented, epoxy-locked vials never need adjusting.
• Two crystal clear, non-fogging, unbreakable, monoblock, acrylic vials (one
horizontal and one vertical).
#25100
10” Torpedo level . . . . . . . . . . . . . . . . . . . . . . . $ 26.95
Ear Muffs
• Durable and lightweight design
• For use on top of head, behind the head, or below
the chin
• Noise reduction rating 22 dB
#CP665 . . . . . . . . . . . . . . . . . . . . . . . . . $ 10.25
Classic Ear Plugs
• Soft, form fitting foam that gradually takes the shape
of the ear canal for superior prolonged comfort and
protection
• Noise reduction rating 29 dB
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
Safety Ear Muff & Eye Protection
• All-in-one hearing and eye protection
• Clear lens tested in accordance with ANSI
Z87.1-1989
• Noise reduction rating NRR 26 dB
• Blue with red brow bar lens
#OM-77L
Optimuff . . . . . . . . . . . . . . $ 29.95
Shop Fox Safety Glasses
D2675
Exceeding ANSI Z87.1 - 1989 standards for
impact resistance, these safety glasses offer
outstanding eye protection and stylish good
looks. Wrap-around side shields provide additional protection and a wide field of view.
Model D2676 features easily adjustable ear
pieces for length and comfort.
#D2675
#D2676
#M6800
$ .25
Dust Masks
• For use with nuisance level dusts below the PEL
• Provides relief and protection from nuisance dusts
such as animal dander, pollen and other nuisance
level dusts at exposures below the OSHA Permissible
Exposible Limit
#CP1000VP
Package of 50 . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.95
Metal Frame . . . . . . . . . $ 7.90
Adjustable Frame . . . . . $ 5.90
Safety Filter Mask
The safety filter mask provides greater protection over paper filters with its formfitting
cloth seal. Ideal for dusty shop and work
environments. One size fits all.
#D2759
D2676
49
One pair . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . $ 1.50
Monday - Friday
Shop Accessories
Diamond Honing Cone
Knife Hone & Guide
This diamond honing cone is the perfect
sharpening tool for radius carbide tipped router
bits and shaper cutter and steel carving
gouges. Great for keeping fish hooks sharp too
with its special fish hook groove. Lanyard hole
makes it easy to keep this item handy around
the shop or favorite fishing hole. 400 grit.
#D2473
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.95
These diamond knife sharpeners are the most
efficient tools for putting a keen edge on all
non-serrated knives. Round profiles ensure a
single point of contact with the blade and a
long sweeping motion during sharpening provides uniform results.
5” sharpener . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
10” sharpener . . . . . . . . . . . . . . . . . . . . . . . . $ 29.95
Water Stones
Japanese Waterstones are great to keep tool
edges sharp -- woodworkers of all skill levels
are turning to them. This is because waterstones cut more aggressively, and a sharp
edge can be achieved much faster. Waterstones
also polish as they hone, allowing a mirror finish without the need for stopping
or polishing compounds. Only water is needed to lubricate the cutting edge.
#D1067
#D1069
#D1070
#D1130
800 grit . . . . . .
1200 grit . . . . .
6000 grit . . . . .
1000 / 6000 grit
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
#D1123
5-Piece Carving Chisel Set
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 19.95
$ 22.95
$ 43.95
$ 33.95
#D2489
A clever yet simple tool for holding a chisel or plane
blade at the proper angle. Moves on a hardened
steel roller. Honing guides ensure the perfect bevel
angle every time for keeping a sharp edge.
. . . . . . . . . . . . . . . . . . . . . . . . $ 8.95
Honing Guide
Rubber body keeps sharpening stones
from sliding around the benchtop during honing. Chrome plated hardware resists rust when using waterstones.
Adjusts from 5-1/2” to 9” to fit a wide range of stone sizes.
#D1091
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.95
Sharpening Kit
Oilstone Sharpening Kit is an all-in-one kit that
handles most woodworkers' honing chores.
Includes 8" combination (coarse/medium)
aluminum oxide stone, our #D1044 honing
guide, a 1 oz. bottle of honing oil and a special
non-slip rubber pad.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
12-Piece Carving Chisel Set
Complete Carving
Chisel Set features
beech wood handles
with steel ferrules.
Set includes: 6mm
straight, 12mm
straight, 10mm Vtool, 6mm right
skew, 6mm double
skew, 8mm gouge, 10mm gouge, 14mm gouge, 6mm spoon, 6mm beading, 6mm round nose, 6mm V-groove and a leather roll-up pouch. Each
chisel measures 7-1/2" overall.
#D2227
Honing Guide
#D1044
. . . . . . . . . . . . . . . . . . . . . . . . . $ 8.95
These razor sharp carving chisels
are designed to be used by hand
pressure alone. Ergonomic handles have no-slip thumb and forefinger grips for unsurpassed control. Set includes: 1/4” straight,
1/4” skew, 1/8” vee, 1/8” gouge,
and 1/4” gouge. Overall length of
each chisel is 5-3/4”
Diamond Knife Sharpeners
#D3081
#D3082
With this handy sharpener, you will be able to hone
your jointer and planer knives to razor sharpness
without removing them from the machine! Great for
quick touch-ups and extends the period between
major re-sharpening.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 49.95
Shop Fox Mallets
These round head mallets feature a tough
urethane 360° striking surface that is non
marring and very quiet to use. Urethane
also provides plenty of mass for tough
carving operations. The finely sanded maple handles are turned to yield
a comfortable grip for all day use.
#D2805
#D2807
#D2808
12 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.00
20 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 21.90
30 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 23.90
Brass Head Mallets
These brass head mallets provide unequalled
control and balance in a compact design and
are a real extension of the craftsman’s
hand. Turned and polished brass heads are
joined to finely finished maple handles to
create the true essence of form and function.
#D2809
#D2810
8 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.90
12 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.90
#D1118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 16.95
Monday - Friday
50
Shop Accessories
Foam Brush Sets
Disposable and ideal for all water and oil
based stains and finishes. Brushes feature
either wood or plastic handle for unsurpassed
control. Use 3/4” brushes for detailing and
small touchup work.
#D2031
#D2490
#D2024
#D3247
24-Piece Foam Brush Set
with wooden handles
includes 10 - 1" brushes,
8 - 2" brushes and 6 - 3"
brushes. Poly bagged.
$ 7.95
24-Piece Foam Brush Set with plastic handles
includes 10 - 1” brushes, 8 - 2” brushes and 6 3” brushes. Blister card packaging. . . . . . . . . . . $ 5.95
50-Piece Foam Brush Set with wooden handles
includes 20 - 1” brushes, 20 - 2” brushes and
10 - 3” brushes. Conveniently boxed . . . . . . . . . $ 11.95
50-Piece 3/4” Foam Brush Set with wooden handles for small detail or touchup work . . . . . . . . . . $ 6.95
Industrial-Use Vinyl Gloves
Industrial-Grade Gloves protect
hands from paints, stains, and irritating cleaning solvents. Also great
for other messy chores, such as
automotive or farm work. Each dispenser box contains 100 gloves
which are powdered to make them
easy to put on and remove.
#D2028
#D2027
Medium Size . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
Large Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
Glue Spreader Kit
Apply you adhesive with pinpoint precision into
dowel holes, finger joints, dovetail joints, board
edges, etc. Eight different nozzle attachments
for a wide variety of application needs. Also
includes a wide roller head for edge and face
gluing applications.
#19119 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
150-Piece Mega Brush Set
This Mega Brush Set includes
50 foam brushes with wooden
handles, 50 bristle brushes
with wooden handles and 50
glue brushes in assorted sizes.
Ideal for quick painting, staining and finishing jobs, as well
as spreading glue, flux and
pipe dope, the convenience
factor alone makes this set one of the best deals around.
#D3105
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.95
Glue Injector Kit
3-piece kit of plastic construction. These injectors
can be used over and over again. Also useful for
grease, oil, etc.
#320-2000 . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.50
Plastic Glue Bottle
If you use a lot of glue, save money by
buying in bulk and transferring in to this
smaller container.
#17820 . . . . . . . . . . . . . . . . $ .95
50-Piece Bristle Brush Set
Inexpensive enough to throw away
when finished, saving time and messy
clean-up with water or chemical solvents. These solvents eventually end
up as costly waste. Ideal for all painting chores. Includes 5 - 1/2" brushes, 20 - 1" brushes, 15 - 2" brushes
and 10 - 3" brushes.
#D2025
. . . . . . . . . . . . . . . . $ 17.95
Glue Brushes
Great to have around the shop.
Inexpensive enough to be disposable yet
can be used over and over by simply cleaning after each use. Made from pure lack
horsetail bristle, set in a handle with a
bright, tin-plate finish.
#130250
#13030
#D2026
51
1/4” glue brush . . . . . . . . . . . . . . . . . . . . . 4 for $1.00
1/2” glue brush . . . . . . . . . . . . . . . . . . . . . 4 for $1.00
50 piece assorted . . . . . . . . . . . . . . . . . . . .
$ 9.95
Glue Roller Bottle
The wide roller dispenses glue evenly and
uniformly to a wide variety of surfaces.
Works very well for gluing large surfaces and
works even better for edge gluing lumber.
#19044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
Gorilla Polyurethane Glue
Gorilla Glue is the strongest and most versatile glue on
the market today. It takes just an ounce of Gorilla Glue
to cover one square foot. Formulated for indoor and outdoor use. In addition to being 100% waterproof, stainable, paintable and incredibly strong, Gorilla Glue bonds
wood, stone, metal, ceramics, Corian®, styrofoam and
more. Long open working time. Remember that this
glue will foam 3 to 4 times its applied size, so a little
goes a long way.
#50002
#50008
#50018
2 ounce bottle . . . . . . . . . . . . . . . $ 4.99
8 ounce bottle . . . . . . . . . . . . . . . $ 12.99
18 ounce bottle . . . . . . . . . . . . . . $ 19.99
Monday - Friday
Shop Accessories
“Hot Shot” Instant Glues
Very fast acting, these adhesives will bond just
about everything. Carefully read the descriptions below and select the adhesive that will
best suit your needs. We also offer a sampler
package below.
The Original “Hot Stuff” - Bonds to clean and smooth surfaces. Use in any
place a thin viscosity fast setting glue is required, such as chair joints that are
loose. Setting time is incredibly fast at only 3 to 10 seconds. (Red label)
#WHS1
1 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.40
#WHS2
2 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.10
#WHS4
4 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 21.10
“Super T” Glue - is the general purpose version. Its medium viscosity
and drying time allows some alignment and assembly time. For filling
small gaps between the surfaces to be bonded. Setting time is 10 to 15
seconds. (Yellow label)
#WSUT1
#WSUT2
#WSUT4
1 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.40
2 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.10
4 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 21.10
Franklin Hi-Purformer Advanced Bonding System
Polyurethane hot melt technology is not new to the
adhesive industry. In fact,
polyurethane hot melts have
been successfully utilized for
many different applications
for several years. They combine the positive attributes
found in various, unique
adhesive technologies and deliver them in a single product. Polyurethane
hot melt adhesives outperform traditional hot melts, offer a faster set than
yellow glues, and provide a more permanent, less brittle bond that super
glues. In addition, this technology provides a strong, waterproof bond which
reduces the need for clamping or bracing and works on most common woodworking and construction materials. Kit includes cartridge gun, cartridge
base (charger), 3-adhesive cartridges, & carrying case.
#1341
#1301
#1311
#1301
Hi-Purformer kit . . . . . . . . . . . . . . . . . . . . . . .
30 second set, wood to wood adhesive cartridge
60 second set, wood to wood adhesive cartridge
75 second set, multi-purpose adhesive cartridge
.
.
.
.
.
.
.
.
. $ 99.95
. $ 6.80
. $ 6.80
. $ 6.80
Shop Fox Glue Guns
“Special T”Glue - For filling large gaps and a longer open time. It is excel-
Made from high impact injection molded
plastic, these guns feature comfortable trigger action, attached wire stand and fast heat
glue tip.
#D2484 40 Watt glue gun. . . . . . $ 8.95
#D2485 60 Watt glue gun. . . . . . $ 11.95
#D2487 12 pack glue sticks . . . . $ 3.95
lent on very porous surfaces or where complete alignments and assembly is
required. Setting time is about 20 to 50 seconds. (Green label)
#WST1
#WST2
#WST4
1 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.25
2 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.20
4 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 23.35
“Hot Shot”Surface/Joint Cleaner & Accelerator Ideal for removing trace
oils or waxes from cracks before gluing. It also acts as an instant-setting
agent for “Hot Stuff” glues. Only a very small amount of accelerator is
needed. Use on oily woods such as teak to prepare the surface for gluing.
#WNCF2M
#WNCF5M
#WNCF18M
Take away the guesswork and layout
process from drawer slide installation
with this universal Drawer Slide Boring
Jig. Handles our full range of Drawer
Slides from 10” long to 26” long.
2 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.65
5 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.10
18 oz refill . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.95
Ultra Super Solvent - Removes adhesives from hands, workpiece or
wherever the glue was not meant to be.
#WUS2
Drawer Slide Boring Jig
#D3170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.95
2 oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.65
Shelf Support Boring Jig
“Hot Shot” Replacement Tips - Sold per pack of 2 tips.
#WS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 2.20
“Hot Shot”Sampler Packs - Each kit includes all three glues, 3 oz. of
Accelerator, 2 oz. Solvent, 2 spouts with caps and the applicator tubing.
Order by the glue size you desire.
#WSS1
#WSS2
1 oz sampler set . . . . . . . . . . . . . . . . . . . . . . $ 32.95
2 oz sampler set . . . . . . . . . . . . . . . . . . . . . . $ 46.75
Make standard in-line shelf support layout and
drilling easy with this Shelf Support Boring Jig.
Made for drilling 5mm holes. Requires a 5mm
(13/64”) drill bit and depth stop.
#D3171
#BP-5MM
Boring Jig . . . . . . . . . . . . . $ 12.95
5mm HSS brad point bit . . . $ 5.75
* See page 35 for depth stops
Teflon Applicator (tubing) - For careful application of small amounts
of glue. Cut a short portion of the length required, insert into spout hole
of red or yellow label glues.
#WAPP10
18” applicator tubing . . . . . . . . . . . . . . . . . . . . $ .75
Shelf Supports
These shelf supports are ideal for easy to adjust shelving. Just
drill four holes per shelf location and insert the shelf support.
Pins measure 5mm diameter x 5/16” long. 12 per pack.
#D3146
Clear shelf supports . . . . . . . . . . . . . . . . . $ 1.50
Monday - Friday
52
Shop Accessories
Drawer Slide Brackets
Euro-Style Hinges
These brackets are used to mount drawer slides to
the inside of metal frame computer cabinets. 2”
width supports our three quarter and full extension
drawer slides. Sold in pairs.
Euro-Style Hinges are the
industry standard because they
provide superior cabinet door
strength and they’re very easy
to install and adjust. We offer
Euro-Style Hinges in a variety of
overlay options including inset
in both 110° and 175° openings as well as a 105° Face Frame Overlay and
a 230° Corner Barrel Hinge. Sold in pairs.
#D3169 . . . . . . . . . . . . . . . . . . . . . . . . . $ 3.95
European Design Drawer Slides
These extremely popular, high quality drawer
slides are epoxy coated for years of service and
nylon rollers provide smooth operation. Each set
includes left and right hand slides.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 1.95
$ 2.25
$ 2.40
$ 2.50
$ 2.65
$ 2.75
$ 3.25
These 3/4 extension drawer slides support
up to 80 pounds. Very slim profile utilizes
maximum drawer width and multiple ball
bearings distribute the weight over a larger
area for smooth, effortless action. Each set includes two slides. Each slide
measures 3/8” x 1-3/8”.
#D3023
#D3024
#D3025
#D3026
#D3027
#D3051
12”
14”
16”
18”
20”
22”
Drawer
Drawer
Drawer
Drawer
Drawer
Drawer
slides
slides
slides
slides
slides
slides
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 6.95
$ 7.40
$ 7.95
$ 8.40
$ 8.95
$ 9.50
For the ultimate in drawer hardware, these full
extension drawer slides support up to 100
pounds and feature multiple ball bearings for
smooth operation. Full extension drawer slides
measure 1/2” x 1-3/4” and include left and right-and slides.
12”
14”
16”
18”
20”
22”
24”
26”
Drawer
Drawer
Drawer
Drawer
Drawer
Drawer
Drawer
Drawer
slides
slides
slides
slides
slides
slides
slides
slides
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
110° Half Overlay
. . . . . . . . . . . . . $ 1.29
#D3036
D3139
1.5”
1.125”
110° Inset
#D3037
$ 7.95
$ 8.95
$ 9.20
$ 9.50
$ 9.95
$ 10.50
$ 10.95
$ 11.50
#D3142
Euro style drawer slide adapters . . . . . . . . . . . . . $ .95
3/4 Drawer slide adapters . . . . . . . . . . . . . . . . . $ 1.25
Full extension drawer slide adapters . . . . . . . . . . $ 1.25
#D3144
Drawer Slide Adapters
. . . . . . . . . . . . . $ 1.29
D3037
D3142
Ball Bearing Full Extension Drawer Slides
#D3028
#D3029
#D3030
#D3031
#D3032
#D3067
#D3033
#D3034
110° Full Overlay
#D3035
Ball Bearing 3/4 Extension Drawer Slides
2.4375”
.
.
.
.
.
.
.
. . . . . . . . . . . . . $ 1.29
2”
105° Face Frame
. . . . . . . . . . . . . $ 5.95
#D3139
D3143
175° Full Overlay
D3144
2.25”
. . . . . . . . . . . . . $ 7.95
2.5625”
175° Half Overlay
. . . . . . . . . . . . . $ 7.95
#D3143
D3145
1”
1.875”
.
.
.
.
.
.
.
1”.375
.
.
.
.
.
.
.
2.375”
.
.
.
.
.
.
.
2.3125”
slides
slides
slides
slides
slides
slides
slides
1.3125”
2.3125”
Drawer
Drawer
Drawer
Drawer
Drawer
Drawer
Drawer
2.375”
10”
12”
14”
16”
18”
20”
22”
1”
2.375”
#D3018
#D3019
#D3020
#D3021
#D3022
#D3050
#D3095
D3036
D3035
Use these drawer slide adapters to support the
back of our drawer slides for center drawer
applications and face frame cabinet construction. Each set includes a left and right adapter.
#D3172
#D3173
#D3174
53
175° Inset
. . . . . . . . . . . . . $ 7.95
230° Corner Barrel
#D3145
. . . . . . . . . . . . . $ 7.95
* See page 34 for 35mm Hinge Boring Bit
Monday - Friday
Shop Accessories
Plastic Knobs for Making Jigs & Fixtures
Wood Joiner’s Handbook
Make fixtures easier,
quicker and in some
cases, safer to use.
The knobs are hard,
black plastic like those
on industrial machines.
Ratchet levers are
spring loaded to remain
engaged until you lift
and disengage them.
Ideal for work in tight
spaces.
A master woodworker reveals exactly how to make perfect joints:
L-shaped rabbet joints, mortises and tenons, butt joints, dadoes
and grooves, even decorative joints, butterflies and dovetails,
inlays, plus Chinese and Japanese styles. "A vast number of useful joints for cabinetmaking, furniture making and architectural
woodworking."--Woodshop News. 288 pages. Softcover.
#6999-7
Ingenious Jigs & Shop Accessories
Key
Part No.
Description
Price
A
B
C
D
E
F
G
H
I
J
#19702B
#19701B
#19710B
#19712B
#19705B
#19706B
#19714B
#19726B
#19727B
#19725B
T-Knob with 3/8”-16 insert
T-Knob with 1/4”-20 insert
Star knob w/ 1/4”-20 stud
Star knob w/ 1/4”-20 insert
Star knob w/ 3/8”-16 insert
Ratchet lever w/5/16”-18 stud
Ratchet lever w/5/16”-18 insert
Post handle w/ 5/16”-18 insert
$ 1.19
$ 1.09
$ 1.19
$ 1.29
$ 1.19
$ 1.29
$ 1.39
$ 3.59
$ 3.59
$ 2.29
Ingenious Jigs & Shop Accessories presents the work of
America's most clever woodworkers. They've found many new
ways to guide old tools, and in the process solved a wide range of
common shop problems for the rest of us. You'll find almost 40
jigs here and endless ideas for adapting them to your own shop
and projects. 192 pages. Softcover.
#70434
Joinery, Shaping & Milling
#70435
This convenient hold-down system puts clamping pressure anywhere along the flush-mounted
T-Slot track. 3/8” deep x 3/4” wide, they are
designed to be mounted flush to the work surface. The hold-down clamp slides in the T-Slot
and quickly secures with the turn of the hand
knob.
24” T-Slot track . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.90
36” T-Slot track . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.90
Hold-down clamp for track . . . . . . . . . . . . . . . . . . $ 3.70
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 17.95
Techniques and strategies for making furniture parts from Fine
Woodworking. Here you'll discover strategies and tricks for making
simple and complex shapes out of wood. Discover strategies for
milling lumber straight, flat, and square, creating curves through
bending, laminating and coopering, and developing techniques for
routing a wide range of complex shapes and joints. 208 pages.
Softcover.
Aluminum T-Slot Tracks & Clamps
#D2724
#D2725
#D2726
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
.......................................
$ 17.95
Oversized Dust Pan and Counter Brush
Hold the dust pan flush to the floor to pick up
large messes in one swoop. Measures 16”
wide, and 10” deep. Made from aluminum to
guard against corrosion. The counter duster
was specifically selected to withstand heavy
shop use. Use it to clean off bench tops,
machinery and tools.
#DP16
#243727
Dust pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 10.99
Counter duster . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.20
Miter Gauge Tracks
8-Piece Screwdriver Set
• 1-5/32” wide x 1/2” high
• Available in 32” or 48” lengths
• Close tolerance fits 3/4” wide x 3/8” deep
miter gauge
• T-Track design is perfect for use with your
own jigs, fixtures and featherboards
• Includes mounting hardware
#MT0032
#MT0048
32” long miter gauge track . . . . . . . . . . . . . . . . $ 17.95
48” long miter gauge track . . . . . . . . . . . . . . . . $ 19.95
You can never have too many screwdrivers, especially when the screwdrivers feature extremely
comfortable high-torque handles and magnetic
tips for easy screw handling in tough places. If
that's not enough, this Steelex Plus® 8-Piece set
also features a convenient wall rack and hardened, chrome vanadium tips for years of dependable use. Set includes: #0 Phillips, #1 Phillips, #2 Phillips, #3 Phillips,
1/8" flat, 3/16" flat, 1/4" flat, and 5/16" flat.
#D2239 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 22.95
Safety Shop Flash
Perfect for workshops with loud machinery running
or when wearing hearing protection. Built-in audible sound or flashing light or both will alert you
every time the phone rings. The shop flash requires
no batteries and includes AC/DC adapter and microphone with 14’ phone cord that easily attaches to
your telephone.
#D2258
........................
$ 29.95
30-Piece Screwdriver Bit Set
One screwdriver set that does it all!
The ergonomic handle produces
tremendous torque and features a
magnetic socket tip for interchanging
hex bits and adapters. Magnetic force holds screws on the bit for thirdhand
convenience. Includes 26 bits of popular Phillips, straight, Torx, hex drive
and square drive sizes, plus a 1/4" socket adapter, bit holder and case.
#D2032 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.95
Monday - Friday
54
Shop Accessories
Steelex® Plus Router Bit Sets
The Rebel Router Table
Steelex Plus® router bit sets are made of high carbon steel bodies and are
tipped with high-quality industrial grade tungsten carbide. Steelex Plus ®
carbide is carefully selected and precision ground to give consistently clean
cuts while maintaining a sharp, durable cutting edge. All Steelex Plus ®
router bit sets come in attractive wooden boxes for added protection.
• Solid cast aluminum
construction
• Two independently adjustable
3”x12” fences
• 3” dust pickup / safety guard
• Aluminum insert with pop-out rings
• Miter gauge
• 24” wide x 17” high x 18” deep
• Easy to follow instruction manual
6-Piece Roundover Bit Set • 1/4” Shank
$ 199.95
#W2000
Safety switch with 7’ cord . . . . . . . . . . . . . . . $ 12.95
#W2001
Complete Set of roundover bit sizes. All sizes have
a 3/8" guide bearing. Includes:
• 1/8" r Roundover
• 1/2" r Roundover (2)
#D2101
. . . . . . . . . . . . . . . . . . . $ 29.95
8-Piece Straight Bit Set • 1/4” Shank
Maple Router Bit Storage Tray
This thick lined storage tray with
finger jointed maple sides holds up
to 60 1/4” shank router bits and
50 1/2” shank router bits. And
because the foam grips each router
bit, there is no risk of damage. The
router bit storage box measures 115/16” x 13-1/2”.
#D2913 . . . . . . . . . . . . . . $ 19.95
Includes these popular bit sizes:
• 1/8" Straight
• 1/4" Straight
• 13/32" Straight
• 1/2" Straight
• 19/32" Straight
• 27/32" Straight (2)
• 15/16" Straight
#D2100
Convenient bit collection includes:
Steelex® Router Bit Sets
Steelex® router bit sets are made of high carbon steel bodies and are
tipped with high-quality industrial grade tungsten carbide. Steelex® carbide is carefully selected and precision ground to give consistently clean
cuts while maintaining a sharp, durable cutting edge. All Steelex® router
bit sets come in attractive wooden boxes for added protection.
•
•
•
•
•
•
1/4" Straight
1/2" Straight
3/4" Straight
1/2" 8° Dovetail
1/2" r Roundover
1/2" Rabbeting
#D2102
4-Piece Roundover Bit Set • 1/4” Shank
5-Piece Edge Forming Bit Set • 1/4”Shank
Set includes five versatile edge-forming bits: 1/2"
Flush Trim, 3/8"r Roundover, 5/32"r Roman
Ogee, 3/8" Rabbet and 45° Chamfer.
.................
1/2" Cove
1/2" 90° V-Groove
45° Chamfer
1/2" Flush Trim
11/32" Combination Panel
1/2" Roundover
10-Piece Brass Guide Bushing Set
. . . . . . . . . . . . . . . . . . . $ 29.95
#D1063
•
•
•
•
•
•
. . . . . . . . . . . . . . . . . . . $ 49.95
Set includes four of the most popular sizes of
roundover bits: 1/8"r Roundover, 3/8"r Roundover,
1/4"r Roundover & 1/2"r Roundover.
#D1062
. . . . . . . . . . . . . . . . . $ 22.95
12-Piece Router Bit Set • 1/4” Shank
$ 37.95
These brass guide bushings with fine threads are
designed to follow around an template for perfectly
matched multiples. the wide range of in side and
outside diameters allows for full flexibility between
router bit cutter size and various templates. The
10-pc set includes: 5/16”OD - 1/4”ID, 3/8”OD - 9/32”ID, 7/16”OD 11/32”ID, 1/2”OD - 13/32”ID, 5/8”OD - 17/32”ID, 3/4”OD - 21/32”ID,
51/64”OD - 5/8”ID, 1”OD - 7/8”ID and two lock nuts. Fits Porter Cable®
routers and other routers with template guide adapters. Neatly organized in
a convenient plastic case.
#D3117
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 26.95
15-Piece Router Bit Set • 1/4” Shank
Inlay Kit with Brass Guide
Adapter and Solid Carbide Bit
15-Piece Router Bit Sets includes 1/2" Trim,
1/2"r Cove, 90° V-Groove, 45° Chamfer, 3/8"
Rabbet, 1/2" 7° Dovetail, 3/8" r Roundover,
5/32"r Roman Ogee, 1/4" x 3/4" Straight, 1/2" x
1" Straight, 3/4" x 3/4" Straight, 1/2" Hinge
Mortise, 1/4" Combination Panel, Solid Carbide
Flush Trim and Solid Carbide Bevel Trim.
Cut perfect inlays with this Inlay Kit and your
shop-made template. Simply slide on the
bushing to rout the cutout and then remove the
bushing to cut the perfectly matched inlay.
Includes a 1/8” solid carbide spiral cutter and alignment pin. Fits Porter
Cable® routers and other routers with template guide adapters.
#D1061 . . . . . . . . . . . . . . . . . . . $ 44.95
#D3118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 22.95
55
Monday - Friday
Shop Accessories
Shop Pads
Rousseau Basic Router Fence
These premium quality neoprene rubber work pads are indispensable for
routing, sanding, protecting tools, lining drawers, dampening vibration, and
more. Pads are 24” wide x 36” long x
1/8” thick.
• 24” long solid aluminum fence
• Will accommodate router bits up
to 3-7/8” dia.
• Rear hardboard cover can be cut to match
dust collection system
• Includes mounting hardware and instructions
#W1320
#W1322
Router pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.95
Anti-Vibration pad . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
Jessem Mast-R-Lift
Beautifully finished with red and black
anodized components, the MAST-R-LIFT
is the sequel to the original ROUT-R-LIFT.
This is the top of the line for Jessems lift
systems. Features a more streamlined
design and increased performance with a full 33/4” of vertical travel. Designed specifically for
the Porter Cable 7518 and to fit similar cylindrical motor housings with the use of a reducer collar. The insert plate centerhole is machined to
accept up to a 3-1/2” raised panel bit and includes
a 1-1/2” insert ring. Aluminum plate measures 9-1/4” x 11-3/4”
#02101
#RM3301
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 74.00
Rousseau Deluxe Router Fence
• Same features as basic fence
• Adjustable spring-loaded rollers
apply downward pressure
• Rollers are angled 5 degrees to draw
the material tight to fence
#RM3301DL . . . . . . . . . . . . . . . . . . . . $ 133.00
Raised Panel Door Templates
The twenty-piece template package
includes ten sizes for the panels and the
ten corresponding templates for the
matching arched rails. Each template is
individually stamped with its size which
indicates overall door width; any door size
between 9-1/2” and 22” can be made.
All templates are made of rugged HDPE
plastic for years of repeated use.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 279.00
Reducer collar - 3-1/2” dia. for P/C 690 . . . . . . . . . $ 21.95
#02111
4-Piece insert ring set (1/4”, 1/2”, 1-3/8” & 2#02021
1/2” centerholes) . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
Template to rout opening for Mast-R-Lift . . . . . . . . . $ 20.00
#03003
Jessem Rout-R-Lift
Raising and lowering your router was
never faster or easier. Just drop the
knob in place on the top of your table
and turn. One revolution of the quick
speed knob equals .05 inches. The
top is made of solid 3/16”, anodized
aluminum plate. The carriage is also
made of solid aluminum with bronze
bearings which ride on solid steel shafts. Includes one 1-1/2” insert, one
wrench for inserts, and hex key. Will not work for off-set based routers.
#02001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 199.00
4-Piece insert ring set (1/4”, 1/2”, 1-3/8” & 2#02021
1/2” centerholes) . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
Template to rout opening for Rout-R-Lift . . . . . . . . . $ 20.00
#02031
Rousseau Router Base Plate
• 9” x 12” x 3/8” thick
• Fits router bits up to 3-7/8” in
dia.
• Small opening fits standard
Porter-Cable template guides
• Removable rings create
2-5/8” and 3-7/8” openings
• Includes shoulder pin for starting freehand work
#RM3509
French Provincial
#TMP-001
#TMP-003
#TMP-004
Roman
Cathedral
20 piece French Provincial Templates . . . . . . . . $ 120.00
20 piece Cathedral Templates . . . . . . . . . . . . . . $ 120.00
20 piece Roman Templates . . . . . . . . . . . . . . . . $ 120.00
Formula 2050 Blade and Bit Cleaner
Finally, a safe environment friendly cleaner that is more
effective than all those hazardous chemicals used to clean
cutting tools. Removes pitch, resin and adhesive residue
from all woodworking cutting tools. Completely non-toxic,
non-flammable, certified biodegradable. Do not rinse after
cleaning as formula 2050 provides protection from rust and
corrosion. Keeps your table saw top rust free too.
#998.001.01
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 35.00
Optional Accessory:
#RM3509-T
Installation template kit for above . . . . . . . . . . . $ 16.00
18 ounce spray bottle . . . . . . . . . . . . . . . . . . $ 10.95
Safety Power Switch
•
•
•
•
Crash bar for quick and safe shut off
15 Amp, 120 Volt
14 gauge power cord, 9’ long
Mounting hardware included
#RM3506 . . . . . . . . . . . . . . . . . . . . $ 29.00
Monday - Friday
56
Shop Accessories
Bessey K-Body Clamps
Pony 4-Corner Framing Clamp
This clamp is designed so clamping pressure is distributed over the entire jaw surface. Non marring
glue resistant jaw surfaces always remain parallel.
Hardened rollers maintain sliding arm at right angle
to rail.
Applies equal pressure to the four corners of your
picture frames, and casework to ensure that the
frame is square and that the miters match. Each
corner's pressure can be individually set. # 94240
- Adjustable from 2" x 2" to 24" x 24". # 94480
- Adjustable from 2" x 2" to 48" x 48".
Ideal for case
construction!
12”
24”
31”
40”
50”
60”
82”
#K3.512
#K3.524
#K3.531
#K3.540
#K3.550
#K3.560
#K3.582
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 36.25
$ 39.95
$ 43.25
$ 46.50
$ 49.50
$ 52.90
$ 63.80
Bessey KP Blocks
These are the ideal companion for the K-Body
framing clamps. This set of four blocks will allow
you to make up a four corner clamping system
that is perfect for clamping glued-up doors, drawers, etc.
#KP BLOCKS
#94240
#94480
Small clamp . . . . . . . . . . . . . . . . . . . . . . . . . . $ 11.90
Large clamp . . . . . . . . . . . . . . . . . . . . . . . . . . $ 15.10
Bessey Angle Clamps
This heavy duty adjustable angle clamp is used for
clamping two pieces together in either an “L” or
“T” shape when gluing or screwing the two members together. Adjustable so that it will also clamp
the wood pieces if they are of different thicknesses.
Maximum opening capacity when clamping pieces of the same size is 2"
for model WS3 and 4" for model WS6.
#WS3
#WS6
2” Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.40
4” Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . $ 67.40
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 21.80 / Set of 4
Deep Throat C-Clamp
For those jobs where a little extra throat depth
is needed, these c-clamps are great to have
around. Maximum material thickness that can
be clamped is 2-1/2”. 4” reach.
Deep Reach Pipe Clamps
Cast iron, ribbed construction make these
heavy-duty pipe clamps ideal for any
tough clamping requirement where deep
reach pressure is needed. 7” of reach.
Uses standard pipe with NPT threads.
Ideal for case construction applications.
Pipe not included.
#D2838 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 15.95
Shop Fox Pipe Clamps
Double-handle pipe
clamps provide plenty
of clamping torque and
convenient access for
any situation. Cam-action locking device on the fixed jaw ensures no-slip
dependability. Uses 3/4" pipe as bar. Pipe not included.
#D2923
. . . . . . . . . . . . . . . . . . . . . . $ 3.95
#D2230
Quick Release C-Clamps
Quick release mechanism makes
adjustments fast and easy. One-way
travel allows clamp to slide closed and
then disengaging the the mechanism
allows clamp to slide open. Heavy-duty
cast iron construction.
#D3216
#D3217
#D3218
#D3219
3”
4”
5”
6”
Capacity
Capacity
Capacity
Capacity
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 6.95
$ 7.50
$ 8.95
$ 9.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
Wood Clamps
Flex-Jaw Spring Clamps
Made from high strength, impact-resistant plastic
with swivel jaws. Designed to apply uniform
clamping pressure. Comfort grip handles.
#FJAW-2.5
2-1/2” Capacity . . . . . . . . $ 2.35
Miniature Clamp Set
This 3-piece clamp set with magnetic
clamp stand is ideally suited to precision
craft and hobby work. Clamp capacities
range from 1-3/4” to 4-1/2”. Throat
capacity is 7/8”.
This time-tested design with independent jaw control offers greater clamping
options over other types of clamps.
The hardwood bodies don’t require any
clamping pads and the pivoting fulcrum
action provides a tremendous amount of clamping pressure.
#D3007
#D3008
#D3009
#D3010
#D3011
4” Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . .
6” Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . .
8” Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . .
10” Capacity . . . . . . . . . . . . . . . . . . . . . . . . . .
12” Capacity . . . . . . . . . . . . . . . . . . . . . . . . . .
#D3198 . . . . . . . . . . . . . . . . . . . $ 2.95
57
Monday - Friday
$ 3.50
$ 4.95
$ 6.50
$ 7.95
$ 9.50
Shop Accessories
Jorgensen Bench Hold-Down
Ulmia Spring Miter Clamps
Excellent tool for gluing, repairing, or holddown projects. This glass-filled nylon holddown clamp is designed for workbenches and
work tables. A versatile addition to any tool
box. Quick and easy adjustments to and from
the work using the release locking nut that
slides freely on the threaded shaft. Serrated hold-down jaws prevent slipping and can adjust to work being clamped and locks into position with
the locking lever. Hold-down capacity is 4-1/2” less work bench thickness, and used with 3/4” bench top holes.
Open these clamps by squeezing with your fingers, then apply to miter joint. Extremely handy
and useful when clamping small moldings.
#560-3050
#560-3060
Up to 5/8” capacity . . . . . . . . . . . . $ 5.15
Up to 1” capacity . . . . . . . . . . . . . $ 5.45
Ulmia Miter Clamps
These miter rings have sharp tips that draw a miter
joint together. Miter ring capacity is the molding size
the ring will clamp. These are strong rings, so an
application tool is necessary.
#560-3130
Up to 3/8"
$ 1.95
#560-3140
3/8" to 3/4"
$ 1.95
#560-3150
9/16" to 1-1/8"
$ 2.35
#560-3160
1" to 1-3/4"
$ 2.60
#560-3170
1-9/16 to 2-3/4"
$ 2.70
#560-3180
2-3/8" to 3-1/2"
$ 2.75
#560-3190
Kit w/tool & 8 ea. Rings $ 129.95
#560-3100
Application Tool Only
$ 54.65
#1652
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 13.95
Jorgensen Bench Hold-Down
A versatile, easy-to-use clamp for holding work in place on
bench tops. Made of solid iron with a black baked-enamel finish; holds work securely by simply tapping into 3/4”
hole in bench top (requires pre-drilling). 8” length,
4-1/4” reach.
#1708
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.50
Shop Fox Quick Release Vises
2-1/2" 3-Way C-Clamp
These heavy cast iron wood vises with polished guide rods have quick release levers
that disengage the screw for fast and efficient operation. They also feature sliding
dogs for securing long workpieces to the
bench and disappear out of the way when not in use. Jaw width is 7" on
D2524 and 9" on D2525.
Suited for edge clamping, these 3-way
clamps are fully adjustable for easy use.
Simply secure the two opposing screws to
the workpiece and then tighten the
thumbscrew to hold the edge piece.
2-1/2” maximum reach.
#D2229 . . . . . . . . . . . . . . . . . . . $ 4.95
#D2524
#D2525
8” Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . $ 55.95
10-1/4” Capacity . . . . . . . . . . . . . . . . . . . . . . $ 65.95
“No-Scuff” Clamps
The right angle clamp (top illustration) is
used to clamp assemblies perpendicular
(like pulling a shelf into a dadoed cabinet
side), and the regular profile is largely used
to clamp face frames without scuffing.
Lightweight, they only weigh about 1-1/2
lbs. Each. Both clamps can eliminate the
need for long bar clamps.
#D2268
#D2269
This stop is easily installed into your bench top.
Turn the thumb screw to raise and lower. Very stable
support. Made from a soft metal that will limit harm
to cutting tools if they come in contact with stop.
#19114
Right angle clamp . . . . . . . . . . . . . . . . . . . . . . $ 14.95
Face frame clamp . . . . . . . . . . . . . . . . . . . . . . $ 14.95
Pinch Dogs
Pattern and cabinet maker steel pinch dogs have
square corners over the legs for easy driving. Makes
it a breeze to pull any two boards together.
#160-3004
#160-3006
#160-3008
#160-3010
#160-3012
Flush Mount Bench Stop
1” Width . . .
1-1/2” Width
2” Width . . .
2-1/2” Width
3” Width . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 5.30
$ 5.65
$ 6.00
$ 6.50
$ 7.30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
Jet Jointer Clamps
No more fumbling around trying to hold your
work together. There is nothing to tighten,
turn or twist in order to hold the work piece in
place. Simply push the clamps into position
and you can glue, screw, pin or hold the work
piece together. 90 degree, “T” and butt
joints are aligned automatically, freeing your
hands up to finish jointing the rest of the
project. Accommodates up to 3/4” material thickness. 2 per set.
#709055
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
Monday - Friday
58
Shop Accessories
Kreg Pro Pack
Adjustable Pocket Jig
• Utilizes a unique three-hole spacing
concept
• Ability to horizontally
space holes at 9/16”,
7/8” and 1-7/16” on center
• Vertical settings to center
holes in 1/2”, 3/4” and
1-1/2” thick material
• Includes K2000 jig, R2 Rocket Jig,
two wing supports, MKJ mini jig, Two
extension blocks, FC6 6” face clamp, 3/8”
step drill bit, depth collar, 3” and 6” driver, starter pack of 150 screws.
• Adjustable double pocket hole guide adjusts
from 7/8” to 3-1/4” between centers.
Features hardened steel sleeves.
#K2000-PP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 135.00
#D1060 . . . . . . . . . . . . . . . . . . . . . . . . $ 9.95
Step Drill Bits
• One-piece, 3/8” diameter step bits. Available in two popular cutting
angles; 45° for flat head screws and 90° for pan head screws.
Kreg 90° step drill bit . . . . . . . . . . . . . . . . . . . $ 16.99
Economy 90° step drill bit . . . . . . . . . . . . . . . . $ 8.95
Economy 45° step drill bit . . . . . . . . . . . . . . . . $ 8.95
#KJD
#D1115
#D1114
Face Clamps
• Ensure a flush joint every time. Keeps the
work pieces in alignment regardless of the
screws trajectory. Clamp’s large pad also
keeps the clamp from marring the wood.
Kreg Jig
• The original aluminum Kreg Jig is a good
choice for the woodworker who works primarily with 3/4” thick material in a limited
number of applications.
• Includes jig with two 3/8” diameter drill
guides positioned 7/8” on center, 3/8” step
drill bit and depth collar
#K2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 99.00
Kreg Rocket Jig
• Dual purpose clamp to hold jig against
the workpiece as well as align the workpieces
• Compact and portable, 7/8” on center
guides
• Includes Rocket jig with extension, FC6
face clamp, 3/8” step drill bit, collar, #2 x 6” square driver, starter pack
of screws
Standard face clamp, 2” reach . . . . . . . . . . . . $ 17.99
Large face clamp, 6” reach . . . . . . . . . . . . . . . $ 19.99
#SFC
#LFC
Kreg Right Angle Clamp
The Right Angle Clamp helps to align workpieces in 90 degree registration. The clamp
is designed with a steel dowel on one arm
that fits down into the pocket hole and
anchors the workpiece firmly against the
second workpiece to be joined. The opposite
arm is fitted with a 180 degree swiveling
pad that automatically adjusts to your material dimensions. Finish the
joint by driving a screw into the adjacent pocket hole.
#RAC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.99
Kreg Universal Bench Clamp
#R2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 64.95
Kreg Mini Pocket Jig
• When you need a pocket hole in a tight spot,
or require maximum portability, this jig is the
solution. Features one 3/8” hardened steel
sleeve molded into glass reinforced nylon.
#MKJ
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 12.99
1/4” Hex Shank Power Bits - Square Drive
Part
No.
#80-1R
#80-2R
#80-3R
#84-1R
#84-2R
#84-3R
#88-1R
#88-2R
#88-3R
59
Point
Size
1
2
3
1
2
3
1
2
3
Overall
Length
1-15/16”
1-15/16”
1-15/16”
3”
3”
3”
6”
6”
6”
If you like the idea of using KREG Face
Clamps to hold workpieces flush while driving
the screws, you'll love the added assembly
ease and flexibility of the Universal Bench
Klamp. This clamping system includes a 10" x
10" x 1/4" thick steel plate along with a modified Face Clamp that easily
slides in and out of a channel machined into the plate. Simply rout the
steel plate into your workbench or a piece of plywood and you have a
360 degree pivoting clamping station for all of your pocket hole assembly needs. The clamp is then easily removed to leave you with a perfectly
flat work surface. This clamping system also works well when helping as
a hold-down for routing, sanding and finishing.
#UBK
Price
Each
$ .64
$ .64
$ .64
$ 1.08
$ 1.08
$ 1.08
$ 1.98
$ 1.98
$ 1.98
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 39.99
Pan Head Pocket Hole Screws
• Provides excellent holding power in
soft materials and hardwoods. 1-1/4”
is standard length. Fine thread. #2 square head.
#SPS-F125
#SPS-F125-500
#SPS-F150
#SPS-F150-500
#6,
#6,
#6,
#6,
1-1/4”
1-1/4”
1-1/2”
1-1/2”
long,
long,
long,
long,
100
500
100
500
per
per
per
per
box
box
box
box
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Monday - Friday
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
$ 4.00
$ 15.00
$ 4.25
$ 16.00
Shop Accessories
Steelex® Red Polyurethane Casters
Stanley Panel Carrier
These casters feature a polyurethane wheel molded to a polypropylene
hub with an oil-less bearing. They are excellent for a wide variety of
applications where quiet operation, high wear factor and high corrosion
resistance are a concern. We offer them in a number of configurations
for a variety of applications.
• This Panel Carrier is high visibility yellow
• 14" handle for extra reach
• Better balance and control
• Better visibility while carrying
• Angled handle keeps hands away from panel for
comfort
#93-301
. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5.95
Adjustable Power Pole Extension Pole
D2604
Part
No.
D2604
D2605
D2607
D2609
D2608 *
D2610 *
D2614 * †
D2616 *
Size
3”
4”
3”
4”
3”
4”
3”
4”
D2609
D2605
Plate
4”x2-5/16”
4”x2-5/16”
2-1/2”x2-5/16”
3”x3”
2-1/2”x2-1/2”
3”x3”
M12x1-3/16”
M12x1-3/16”
Type
Fixed
Fixed
Swivel
Swivel
Swivel w/Brake
Swivel w/Brake
Swivel w/Brake
Swivel w/Brake
Capacity
220 lbs.
275 lbs.
150 lbs.
275 lbs.
150 lbs.
27 lbs.
150 lbs.
275 lbs.
D2616
The Adjustable Power Pole can hold up to
66 pounds. They feature articulating feet,
rubber pads & quick-release levers and have
thousands of uses, including:
• Setting plaster strips to a
ceiling
• Installing crown molding
• Holding parts requiring both
hands
• Securing items to be clamped, screwed or assembled
Price
Each
$ 3.90
$ 5.90
$ 4.50
$ 8.50
$ 6.50
$ 9.90
$ 6.50
$ 9.90
#W78
* Double locked
† Will fit the Performax™ Sanders
#W74
Steelex® Black Hard Rubber Casters
These economical casters feature a
one-piece molded hard rubber
wheel/hub with an oil-less bearing.
They are quiet, offer good floor
protection, are easy rolling, resistant to water, oil and most acids
D2620
D2623
and come with a mounting plate in
either a swivel or fixed design. They are great for a large number of
applications around the shop and home.
Part
No.
D2619
D2620
D2621
D2622
D2623
D2624
Size
2”
3”
4”
2”
3”
4”
Plate
1-1/4”x1-9/16”
2-3/4”x2-5/16”
2-7/8”x2-3/8”
2-3/8”x2”
2-3/4”x2-5/16”
4”x3-5/16”
Type
Fixed
Fixed
Fixed
Swivel
Swivel
Swivel
Capacity
65 lbs.
130 lbs.
175 lbs.
65 lbs.
130 lbs.
175 lbs.
Dual nylon wheels with a steel
plate and stem make these furniture casters very strong for their
weight. Designed for appearance
and durability, these casters are
excellent for use on medium
D2631
D2634
weight furniture such as small
tables, servers, TV stands, microwave carts and other similar types of furniture.
Part
No.
D2631
D2633
D2632
D2634
Size
1-1/2”
2”
1-1/2”
2”
Plate
Type
1-1/2”x1-1/2”
Swivel
1-1/2”x1-1/2”
Swivel
1-1/2”x1-1/2” Swivel w/Brake
1-1/2”x1-1/2” Swivel w/Brake
Capacity
55 lbs.
55 lbs.
65 lbs.
65 lbs.
Adjusts from 45" to 115" . . . . . . . . . . . . . . . . $ 24.95
The Shaper Book
Techniques for using this versatile and productive machine.
More than just a primer on shaper techniques, this book gives
shop-proven examples of how the shaper can be put to use.
With an emphasis on safety, this book is a step-by-step guide
that will teach you all about the shaper: from basic setups to
cutting curved molding profiles to designing shaper jigs that will
expand your woodworking potential. Lonnie Bird. 144 pages.
Softcover.
#70251
Price
Each
$ 1.00
$ 2.50
$ 4.50
$ 1.30
$ 3.00
$ 5.00
Steelex® Nylon Furniture Casters
Adjusts from 19" to 45" . . . . . . . . $ 22.95
......................
$ 19.95
The Table Saw Book
Selection, set-up, and maintenance of a table saw. The author
covers all of the basics of the table saw plus a number of specialty techniques such as cove cutting, dado work, and use of
jigs and fixtures. 192 pages. Softcover.
#70552
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 27.95
Table Saw Techniques
This book provides a complete guide to the most popular stationary power tools. After describing the table saw and its numerous
blades and accessories, the author shows how to perform a variety of cutting operations with the saw by itself or using shop
made jigs. 352 pages. Softcover.
#4268-1
Price
Each
$ 1.00
$ 1.10
$ 1.20
$ 1.30
. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 18.95
The Band Saw Book
Professional woodworker, Lonnie Bird, gives all the information
bandsaw owners wished came in the owner’s manual. A comprehensive, completely up-to-date guide to one of the most versatile tools in a woodshop. 208 pages. Softcover.
#70406 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
Monday - Friday
60
Shop Accessories
#9135-6
Table Saw Bench Guide
Beds
For any operation, special situation, or unusual problem that
arises as you work, the answers are right in this guide. Find
information on all the important cuts (including cross-cutting,
mitering, beveling, and joinery) and facts on every dado head
and what it does. Tips and shortcuts cover procedures from ripping to making mortises, and there's a safety survey and professional secrets for fine-tuning your table saw. 160 pages.
Softcover.
In Beds, you’ll find step-by-step projects for a small bed, a
Shaker-style bed, a Craftsman-style bed, a pencil-post bed, a plywood platform bed, a Windsor chair-inspired bed, a modern "city"
bed, a sleigh bed, and a bunk bed. Yo u ’ re sure to find more
than one project that will inspire you. 192 pages. Softcover.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
The Art of Making Small Boxes
Dual purposes underscore this richly illustrated handbook: to pay
tribute to outstanding contemporary American box makers and to
guide potential box makers to successful fruition of their desire.
Handcrafted wood boxes...lovely items to treasure and, let us not
forget, to actually use as containers...the author presents general
directions, which take the reader from learning about basic tools
to selecting and preparing stock, sanding, and finally, finishing.
Then come profiles of 31 outstanding box makers with directions for making specific projects they have had special pleasure creating. 144 pages. Softcover.
#9576-9
#70379
Tables
From a Shaker sewing table to a display table for art objects, Tables
offers 10 excellent reasons to spend quality time in the shop.
Whether you are a beginner or an experienced woodworker, the projects offered by Anthony Giudice in this book will provide plenty of
challenges to increase your skills. 176 pages. Softcover.
#70469 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
Bookcases
Bookcases are one of the most accessible and commonly built
projects -- who doesn’t need or want open storage for their
homes? The projects in this book cover a range of styles and difficulty -- and they all are designed by well-known custom woodworkers from around the country. 192 pages. Softcover.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
The Wood Sanding Book
If you think that all there is to sanding wood is sandpaper with a
little elbow grease, guess again. In addition to the dozens of different abrasives that you can choose from, there are tools and
techniques that can speed up this often tedious chore. If your
sanding equipment consists of just a sanding block, this book
will open a vast new world. 224 pages. Softcover.
#70302
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
Furniture Making Techniques
"This book aims to appeal to all levels of woodworkers....careful and
practiced approach of someone who thoroughly revels in the day-today rituals of working with wood....author generously relates tales of
his own mistakes and mishaps... while providing encouragement and
illuminating the way for them....The entire work seems to spring from
his bench, and reading the articles is like standing shoulder-to-shoulder with him, catching the 'nuggets' as they spring forth."--Fine
Woodworking. 128 pages. Softcover.
#093-X
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
Refacing Cabinets
Remodeling professional Herrick Kimball shows you how to
transform your outdated kitchen into your dream kitchen using
wood veneer and new cabinet doors and drawer fronts. Add a
new countertop and a fresh coat of paint on the walls, and you
have a new look. 176 pages. Softcover.
. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
#70307
Furniture Source Book
#70431
Enjoying a meal at a handcrafted dining table can be one of a
woodworker's great pleasures. Here, in his new book, Kim
Carleton Graves, one of America's top woodworkers, provides
plans and instructions for building dining tables that would make
any woodworker proud. 192 pages. Softcover.
#70609
Shaker furniture is beautiful, yet simple, craftmanship. In the
Shaker Style, from the pages of Fine Woodworking magazine,
you’ll find the ideas and techniques of more than 15 contemporary artisans and instructions for more than 10 projects, from
Shaker chairs to bookcases. Detailed illustrations and photographs accompany each project. In addition, you’ll see how distinctive Shaker details can be adapted for use in today’s furniture. 160 pages. Softcover.
#70531
You'll learn about preparing material estimates and cutting lists,
buying wood and hardware, cutting and assembling the parts of
each cabinet, and finishing the final piece. Nothing is left out,
from laying out the cabinets to installing them in your kitchen.
152 pages. Softcover.
. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.95
Building Kitchen Cabinets
Learn how to build premium cabinetry of superior quality in your
own shop...from layout and design to installation and final
adjustment. Jim Tolpin simplifies the process of building cabinets by using modern hardware and joinery systems that are fast
and foolproof to execute. He shows ho to construct easily handled cabinet modules and how to customize face frames, doors,
and drawers in the style you choose. 208 pages. Softcover.
Making Workbenches
61
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
Building Kitchen Cabinets
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.95
#0535-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
In The Shaker Style
#70023
"Explore the common materials used to make workbenches, basic
construction methods, and traditional bench designs, including a
joiner's bench and a classic Scandinavian-style cabinetmaker's
bench.... instructions and plans for bench accessories such as drawers and storage bases"--Woodshop News. 160 pages. Paperback.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
Dining Tables
In this book, the author answers the questions you may have
about purchasing and/or commissioning custom pieces. He tells
you where to find furniture and how much you can expect to pay
for it. So whether you are looking for a custom-built dining table
or you want to store your linens in a truly unique armoire, this
book will give you the information you need. 272 pages.
Softcover.
#70565
. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
#70196
.......................................
. . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 14.95
Monday - Friday
$ 19.95
Mail orders to:
The Belsaw Company
90 Karina Court
San Jose, CA 95131
ORDER FORM
If you need more room, please
use a separate piece of paper
Sold To: (Please include the number above your name on the mailing label) Ship To: Please check here if your address has changed
Customer #
Name
Name
Address
Address
City
City
State
Motor Freight Policy:
Items weighing over 70
lbs. are required to
ship via motor freight.
Freight charges will be calculated at the
time the order is placed.
State
Shop Fox® machinery will be shipped
from warehouses located in San Jose,
CA; Bellingham, WA; Springfield, MO or
Williamsport, PA.
Zip
Zip
Telephone
Telephone
Order Number
Qty
Product Description
Shipping and Handling:
Actual shipping charges apply to all
orders. Call our customer service
department if you are not sure what to
add for shipping to a mail-in order.
Price Each
Total Price
* Before signing the freight bill of lading, inspect the shipment for damages
or shortages immediately upon delivery.
It is the responsibility of the signee to off
load all merchandise from trucks. Lift
gate service is available on most truck
shipments for an additional charge. Ask
a salesperson for details. If there is a
problem, contact our customer service
at 1-800-468-4449 before signing the
freight bill.
Sales Tax:
We are required by law to collect sales
taxes. Please include the appropriate
state sales tax along with any county
and city taxes with your order for the
states listed below. Failure to do so
may delay your order.
California • Idaho
Nevada • Washington
Subtotal
Payment Information
Check/Money Order (Enclosed)
Master Card
Visa
American Express
Shipping (Call)
Discover
Grand Total
C.O.D. (Please add an additional $7.50 to your order)
Check by Phone or Fax (Call salesman for details)
Card #
Thank you
for your order!
Exp Date:
Signature
Abrasives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-30
Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Band Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Belsaw molding knives . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-13
Books . . . . . . . . . . . . . . . . . . . . . . . . . .38,40,43,44,54,60,61
Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51,54
Cabinet scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Carving accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Casters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Chisels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57-58
Dado blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Doweling jigs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Drawer slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Drill bit sharpeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-32
Drilling accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-37
Dust Collectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Dust collection accessories . . . . . . . . . . . . . . . . . . . . . . .39-40
Dust pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Feather boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15,25
Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Glue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51-52
Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Jig & Fixture accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Jointers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Laminate accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Lathes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Measuring & Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47-49
Sales Tax
(CA, ID, NV, WA)
Miter gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15,16
Mobile bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Mortising Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Planer/Molders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,13
Planers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-24
Plug cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Pneumatic accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Pocket jigs & accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Roller stands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23,24
Rosette Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Router accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56
Router bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Safety accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Sanders
Belt/Disc Sanders . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Disc Sander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Drum Sanders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Edge Sanders . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28,29
Oscillating Spindle Sander . . . . . . . . . . . . . . . . . . . . . .28
Wide Belt Sanders . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Saw blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Saws (Hand) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Scissors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Scroll Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Shapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Sharpening accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 26,50
Table Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-17
Tap & Die sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Tool bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Vises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31,58
Monday - Friday
Freight is a taxable item in the states of
Nevada & Washington. If you live in
these states, please figure your sales tax
carefully.
Returns:
We want you to be thoroughly happy
with the products you purchase from us.
Credit will be issued for any item
returned UNUSED in the same manner
you purchased (credit card, check). If
you need to return an item, please contact our customer service department for
a return authorization and other instructions.
Customer Service:
If you have questions about your order
or products you received, please ask for
our customer service department and we
will try to answer any questions you
might have.
Open Accounts:
Available only to government agencies,
institutions, public and private schools.
Orders must be written on purchase
orders with complete billing address
noted. Request a credit application
from our credit department.
Duplicate Catalogs:
We make every effort to eliminate duplicated mailing labels. If you receive
more than one catalog, please notify us.
Pricing:
Prices and specifications in this catalog
are effective at the time of printing.
Though we strive to keep our prices as
low as possible, unexpected price
increases from manufacturers may
occur. There are also occasions where
special manufacturers discounts will
result in prices lower than what is published. We will try to offer the manufacturers discount to our customers whenever possible. Typographical errors and
prices are subject to change without
notice.
62
PRSRT STD
U.S. Postage
Paid
Sacramento, CA
Permit #2214
THE BELSAW COMPANY
90 Karina Court
San Jose, CA 95131
Visit us on the Web at:
www.belsaw.com
Mond ay - F rid ay 7:00am to 3 :00pm Pacific T ime
150-Piece Mega Brush Set
TopSaver Rust Removal and Top Protectant Kit
This Mega Brush Set includes
50 foam brushes with wooden
handles, 50 bristle brushes
with wooden handles and 50
glue brushes in assorted sizes.
Ideal for quick painting, staining and finishing jobs, as well
as spreading glue, flux and
pipe dope, the convenience
factor alone makes this set one of the best deals around.
Finally, a rust removal kit that Really Works! It is a
Rust Remover/Lubricant/Surface Sealant/
Conditioner for metal surfaces. It completely
removes rust and corrosion from the pores of the
metal surface. It reduces sliding friction, eliminates
binding and surface hang-ups on tabletops, repels
moisture and seals the surface pores against
rust and corrosion. Includes 8 ounce
bottle of TopSaver, gloves, abrasive
pads and wiping cloths.
#D3105
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 29.95
6-Piece Scraper
Set
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 19.99
Fractional Dial Caliper
This stainless steel fractional dial
caliper combines the same precision
that metalworkers are accustomed to with
a fractional scale for woodworkers. Perfect
for measuring board thickness, depth and
inside measurements. Dial reads 64ths
and .01”. Six inch capacity.
Remove tool marks and
prepare wood surfaces for
finishing better than
sandpaper with this 6piece scraper set. Includes fine, medium and heavy cutting rectangular
scrapers, concave/convex scraper, gooseneck scraper and beveled edge
scraper. To renew cutting edges, simply joint the edge flat with a file and
burnish to form a slight hook angle. Two of the scrapers have rounded
edges to prevent accidental “digging” in your work.
#D3294
#TOPSAVER KIT
#D3208 . . . . . . . . . . . . . . . . . . . $ 39.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 10.95
22-Piece Tapered Drill Set
This set contains tapered drills sized for
#5, #6, #7, #8, #9, #10, #12 screws,
plus the stop collars and countersinks &
counterbores to match them. Includes
allen wrench.
#D1041 . . . . . . . . . . . . . . . . . . . . . . . . $ 16.95
Smith & Wesson® Tool Chest II Multi Tool
This 24-function Multi Tool features so
many tools, it's just like having a tool
chest on your belt. Includes 11 screwdriver bits and Cordura nylon sheath. Includes:
Needlenose pliers with wire cutter, 3/16"
Straight screwdriver/bottle opener, Scissors, File,
Dual scale ruler, Can opener/awl, Phillips screwdriver, Drop point blade, Hex bit holder/1/4" socket.
#SW1057 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 24.95
Shop Fox Pipe Clamps
Double-handle pipe
clamps provide plenty
of clamping torque and
convenient access for any situation. Cam-action locking device
on the fixed jaw ensures no-slip dependability. Uses 3/4" pipe
as bar. Pipe not included.
#D2923
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 6.95
Miniature Clamp Set
Index
on page
62
This 3-piece clamp set with magnetic clamp stand is ideally suited
to precision craft and hobby work.
Clamp capacities range from 1-3/4”
to 4-1/2”. Throat capacity is 7/8”.
#D3198 . . . . . . . . . . . . . . . . . . . $ 2.95

THE BELSAW COMPANY

Transcription

Similar documents

Flex Series

we mean business.

Newsletter July 2010.pub

COLD PLANER

rmm43 english - Runcit Media

Quarterback Development Drills

March 2010 - IAMAW Local 2323

June 2014

TGS_ADTS_CENTURION_v2:Layout 1.qxd

The Mall - Corporette.com

how to set up and run a profitable custom molding business