Monodraught Data Cards

Transcription

Product Cards
April 2013
Monodraught Ltd
Halifax House, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SE
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
E: [email protected] W: www.monodraught.com
Content
INFORMATION
About Monodraught
Terms & Conditions
Guarantee
4
6
10
NATURAL DAYLIGHT SYSTEMS
SUNPIPE®
SUNPIPE 230, 300, 450
SUNPIPE 530, 750, 1000
Square SUNPIPE 300, 450
12
13
17
20
SUNCATCHER®
ABS SUNCATCHER 350, 550
23
24
SOLA-VENT®
SOLA-VENT 230, 300
27
28
NATURAL VENTILATION SYSTEMS
WINDCATCHER X-AIR®
WINDCATCHER X-AIR
SOLA-BOOST X-AIR
31
32
39
VENTSAIR®
VENTSAIR Roof Mounted Terminals
42
43
WINDCATCHER®
WINDCATCHER CLASSIC (Square)
WINDCATCHER CLASSIC (Circular)
WINDCATCHER CLASSIC RCT (Rectangular)
WINDCATCHER CLASSIC OVL (Oval)
WINDCATCHER CLASSIC Bespoke (BSK)
WINDCATCHER HERITAGE
45
46
49
51
52
53
54
SOLA-BOOST®
SOLA-BOOST CLASSIC (Square)
TRILAYER WEATHER PROTECTION (Square)
56
57
59
Page 2
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
NATURAL COOLING SYSTEMS
COOL-PHASE®
60
61
OTHERS
HEAT HARVESTER®
66
66
CONTROL SYSTEMS
iNVent (IN0031)
WINDCATCHER CONTROLLER (IN0001 and IN0002)
SOLA-BOOST CONTROLLER (IN0003 and IN0004)
RAIN SENSOR KIT (IN0043, IN0042, IN0040)
ROOM CO2 AND TEMPERATURE SENSOR (IN0081)
ROOM TEMPERATURE SENSOR (IN0045)
EXTERNAL TEMPERATURE SENSOR (IN0048)
68
69
72
74
76
78
80
82
BUILDING SIMULATION
DAYLIGHT SIMULATION
THERMAL MODELLING
84
85
87
Page 3
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Information
About Monodraught
We have taken our own steps to reduce and minimise our direct impact on the use of energy, waste and water, and have also
taken steps to make indirect impact on our environment with respect to procurement and influencing Clients’ views on low
energy.
Monodraught Ltd seeks to explore, develop and create innovative low energy concepts and building services solutions in
response to the need to reduce energy consumption of buildings and for their users to reduce energy costs.
Accordingly, by maximising natural available energy from the wind and the sun, Monodraught’s products help their users
reduce their energy consumption, costs, and carbon footprint. Monodraught’s extensive R&D department is key to the
successful development of products such as the WINDCATCHER® natural ventilation systems that provides a controlled
quantity of fresh air into a room from roof level, whatever the wind’s direction, and without mechanical assistance; the
SOLA‑BOOST® solar assisted natural ventilation systems that uses the WINDCATCHER technology in coordination with a
solar powered fan to guarantee additional ventilation on sunny days; and the SUNPIPE® natural daylight systems that delivers
daylight to areas that windows cannot reach.
The latest technology to benefit from this dedicated R&D resource is the range of PCM (phase change material) systems
that provide extremely low energy consumption cooling and ventilation systems and provide a stable room temperature
environment.
Armed with all of these systems Monodraught can provide the optimum low energy solution to the client.
•
VISION STATEMENT:
Harnessing nature to deliver exemplar sustainable indoor environments through innovation.
•
MISSION STATEMENT:
Gaining customers for life by: Valuing our people, our products, and our service.
•
CE-MARKING / APPROVALS:
Monodraught’s SUNPIPE System is classified within the following EU Directive:89/106/EEC and further conforms with the following EU Harmonized Standard : EN 1873:2995 Monodraught is accredited with Constructionline in addition to CHAS and Safecontractor Monodraught is also ISO 9001 and 14001 approved.
•
CLEANING / MAINTENANCE:
Monodraught systems are all ‘low maintenance’. However an annual contract is offered to clients which covers routine periodic maintenance.
•
DELIVERY / CARRIAGE:
Carriage paid on SUNPIPE systems applied to UK mainland deliveries 2 – 3 days from date of order. Overnight rush charge + £25. Overseas carriage charges on application. Carriage for Ventilation units upon design and quotation.
Page 4
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
About Monodraught
Since our inception in the UK in 1974, we have always sought to invent, explore and develop innovative products with visually
appealing designs, which achieve an efficient contribution to the optimum enhancing of our natural resources. Monodraught
Products make a major contribution to harnessing natural resources and energy efficient designs, to the ultimate environment
benefit of building for the future.
•
PLANNING PERMISSION / BUILDING REGULATIONS, ETC:
For the SUNPIPE systems you do not normally need to apply for planning permission, but it would be advised to check your local planning department prior to commencement of works. WINDCATCHER natural ventilation systems will require planning permission due to the aesthetic impact on the exterior of the building. Considerations will also need to be made to ensure each individual installation meets with Building Regulations. The requirements for ventilation, acoustic attenuation and thermal performance will need to be assessed. Monodraught can provide assistance in ensuring systems meet with requirements and systems can be tailored to suit each installation.
•
INSTALLATION:
Monodraught offer an installation service if required, please contact Head Office for a quote.
•
TERMS & CONDITIONS:
See Pg 6.
•
GUARANTEE:
Monodraught offer a 10 Year Guarantee on most products (See Pg 10 for full details).
Page 5
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Terms & Conditions
DEFINITIONS:
In these Terms and Conditions of Trading: ‘Monodraught’ means Monodraught Ltd, registered office is at Halifax House, Cressex Business Park, High Wycombe, Buckinghamshire HP12 3SE, (Company No. 01163485). ‘Buyer’ means the person or firm who acquires the Goods under the Contract. ‘Conditions’ means these Terms and Conditions of Trading. ‘Contract’ means the contract between Monodraught and the Buyer for the supply of Goods. ‘Goods’ means any Goods sold by Monodraught to the Buyer and unless separately referred to, “Goods” includes any related or connected services associated with the supply, including any installation, design, fabrication or construction undertaken by Monodraught or its agents. “Order” means the Buyer’s order for the supply of Goods as set out in the Buyer’s purchase order form or written acceptance of Monodraught’s quotation as the case may be.
2.
CONTRACT:
The Buyer’s order constitutes an offer by the Buyer to purchase Goods from Monodraught in accordance with these Conditions. All Orders are accepted by Monodraught subject to the Goods being available. The Order shall only be deemed to be accepted when Monodraught issues a written acknowledgement of the Order at which point a Contract shall come into existence. These Conditions apply to the Contract to the exclusion of any other terms and conditions that the Buyer seeks to impose or incorporate, or which are implied by trade, custom, practice or course of dealing. Goods shall be supplied in accordance with Monodraught’s acknowledgement of order and cannot be cancelled, deferred or altered and shall not be subject to reduction or variation except by mutual agreement confirmed in writing by both parties and subject to agreement as to related costs.
3.
PRICES:
All prices quoted by Monodraught are valid for a period of six months from the date of a quotation or from the date of issue of price lists unless otherwise expressly stated in the quotation or price list. All prices are subject to Valued Added Tax at the current rate at the time of delivery. All prices quoted are net trade prices and shall not be subject to retention or net discount, unless specifically stated in a quotation or acknowledgement of order. Carriage prices shown in quotations are net prices and are not subject to any discount.
4.
DELIVERY:
Monodraught will use its reasonable endeavours to make deliveries of Goods on the date/s agreed but time of delivery shall not be of the essence and Monodraught shall not be liable for any delay in delivery for events of Force Majeure or matters which are the responsibility of the Buyer and shall not otherwise be liable for delay unless otherwise agreed in writing before delivery.
5.
RISK AND INSURANCE:
Risk in the Goods shall pass to the Buyer from the point of delivery to the Buyer’s address or other agreed place of delivery or on collection by the Buyer as appropriate, notwithstanding that property in the Goods may be retained by Monodraught in accordance with Clause 7. The Buyer shall be responsible for effecting its own insurance as appropriate from the date of delivery. Once the Goods have been delivered or installed the Buyer shall be responsible to fully protect them and keep them safe.
6.
PAYMENT:
Payment of any invoice shall become due on the date of Monodraught’s invoice. The final date for payment shall be 30 days after the relevant invoice becomes due. Amounts unpaid beyond the final date for payment are payable with interest calculated at the rate of 8% over the base rate of the Bank of England applicable at the final date for payment until Page 6
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Terms & Conditions
1.
payment is received in full. Within 5 days of an invoice becoming due, the Buyer shall notify Monodraught of the sum that the Buyer considers to be due at the payment due date and the basis on which that sum is calculated (‘payment notice’). Not less than 7 days before the final date for payment, the Buyer may give notice if it intends to pay less than the notified
sum, specifying the sum considered to be due and the basis on which that sum is calculated (‘pay less notice’). Unless the Buyer gives a pay less notice then it shall pay the sum in the payment notice (or in the absence of a payment notice then the sum in Monodraught’s invoice) on or before the final date for payment of the invoice. Where part delivery or part service work is carried out, a payment on account will be payable based on Monodraught’s invoice for the relevant amount.
The Buyer shall not be entitled to apply any set off against any sums owing to Monodraught under the Contract any other sums owing to Monodraught. If the Buyer fails to make any payment by the final date for payment then without prejudice to any other rights Monodraught reserves the right to; suspend some or all obligations under the Contract, or terminate the Contract, or take down and retrieve any Goods previously installed.
7.
RETENTION OF TITLE:
Title in the Goods shall remain with Monodraught until full payment for the Goods has been received. Until such time, the Buyer shall keep the Goods free from any charge, lien or other encumbrance whatsoever and identifiable as the property of Monodraught. Until payment in full for the Goods has been received, Monodraught may at any time require the Goods to be returned to it and if such requirement is not forthwith complied with, it may retake possession of the Goods and for such purposes is irrevocably authorised to enter upon any premises (whether or not occupied by the Buyer) and retrieve the Goods.
8.
WARRANTY OF QUALITY:
Monodraught warrants that from the date of shipment of the Goods that the Goods shall, conform with the specification set out in Monodraught’s quotation or acknowledgement of order or if there is no such specification, the Goods will comply with reasonable standards of quality and will otherwise be reasonably free from material defects in design, materials and workmanship when under normal use. This warranty shall apply for; 10 years for natural ventilation & natural day lighting products, 5 years for natural cooling products. The solar driven, mechanical and electrical components of such Goods shall have a warranty period of 1 year. Whilst all product information is given in good faith the use or application of the Goods is outside the control of Monodraught and accordingly Monodraught gives no warranty as to the fitness of the Goods for any particular purpose and any implied warranty or condition (statutory or otherwise) is excluded insofar as such exclusion is permitted by law, including in regard to the suitability of the Goods for the structure where the Goods are to be installed. It shall be the responsibility of the Buyer to obtain its own professional guidance on such matters.
The Buyer will not be entitled to return Goods to Monodraught unless Monodraught gives written consent and in which case the Buyer shall pay a restocking charge amounting to 15% of the purchase price for the Goods. The Buyer shall
make no claim against Monodraught in relation to defects in the Goods (or shortages in delivery) unless the Buyer has notified Monodraught in writing of the same within 48 hours of delivery. The Buyer must notify Monodraught directly about any such claim (including packaging) relating to carriage.
In the event of a claim, Monodraught must be given a reasonable opportunity of examining the Goods. If asked to do so the Buyer shall return the Goods to Monodraught at the Buyer’s cost. Monodraught at its option, may repair or replace
defective Goods, or refund the price of the relevant Goods.
Page 7
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Monodraught shall be under no liability in respect of defects arising from; the acts or omissions of persons other than Monodraught or its authorised personnel or agents, including but not limited to damage in transit, repairs, modifications or additions made to the Goods by the end-user or any other third party; failure to perform appropriate maintenance; continued use of the Goods after they exhibit signs of any defect or malfunction; carelessness, mishandling, wear and tear, vandalism or unforeseen events; use of the Goods contrary to Monodraught’s recommendations; any failure or defect in related products or systems which the Goods have been integrated with, operate with or are dependent on; defects in materials or workmanship which are the result of installation by persons other than Monodraught.
Except as set out in these Conditions, all warranties, conditions and other terms implied by statute or common law are, to the fullest extent permitted by law, excluded from the Contract. Monodraught will at its sole discretion undertake for the Buyer or any end user of the Goods, the repair or replacement of the relevant Goods at its own cost and so that the
Goods conform to the Contract. If however in Monodraught’s reasonable opinion, the end-user is unable to establish a failure on Monodraught to comply with the Contract then the Buyer shall be responsible for all costs and expenses incurred by Monodraught in investigating any alleged breach.
9.
FORCE MAJEURE:
Notwithstanding any agreement to the contrary, any delivery may be totally or partially suspended by Monodraught as a result in delay in manufacture, supply or delivery arising from acts of God, unforeseeable circumstances, acts of Government or local authority, war, revolution, fires, ice, strikes, industrial disputes, inability to obtain necessary and proper materials, facilities, transportation or labour or any other cause beyond Monodraught’s control. Any Goods, the delivery of which has not been totally or partially suspended shall be accepted by the Buyer as soon as it is reasonably
practicable after the reason for delay has abated.
10.
TERMINATION:
Either party may terminate the Contract with immediate effect by giving written notice to the other party if; the other party commits a material breach of its obligations under the Contract and fails to remedy that breach within 14 days after receipt of the written notice; or the other party suspends, or threatens to suspend, payment of its debts or is unable to pay its debts as they fall due or admits inability to pay its debts or; a petition is filed, a notice is given, a resolution is passed, or an order is made, for or in connection with the winding up or bankruptcy of the other party; an application is made to court, or an order is made, for the appointment of an administrator; or a receiver is appointed over the assets of the other party; or any event occurs, or proceeding is taken, with respect to the other party that has an effect equivalent or similar to any of
the aforementioned events. On termination of the Contract for any reason; the Buyer shall immediately pay all of Monodraught shall not be liable for any loss in any form arising from or related to snow or water ingress into or through the Goods, unless such liability has been accepted by Monodraught in writing. Nothing in these Conditions shall limit or exclude Monodraught’s liability for, death or personal injury caused by its negligence, or the negligence of its employees, agents or subcontractors; fraud or fraudulent misrepresentation; or breach of relevant statutory provisions, subject to which Monodraught shall under no circumstances whatever be liable, whether in contract, tort (including negligence), breach of statutory duty, or otherwise, for any loss of profit, or any indirect or consequential loss arising under or in connection with the Contract; and its total liability to the Buyer in respect of all other losses arising under or in connection with the Contract, whether in contract, tort (including negligence), breach of statutory duty, or otherwise, shall in no circumstances exceed the value of the Goods and after taking into account what is fair and reasonable allowing for the relative contributions to any loss suffered by the Buyer of Monodraught and other parties who have entered into any arrangements (contractual or otherwise) with the Buyer in connection with the Goods or related project or works.
Page 8
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Monodraught’s outstanding unpaid invoices and interest and shall return all of the Goods which have not been fully paid for. If the Customer fails to do so, then the Supplier may enter the Customer’s premises and take possession of them. Until they have been returned, the Customer shall be solely responsible for their safe keeping and will not use them for any purpose not connected with the Contract. The accrued rights and remedies of the parties as at termination shall not be affected, including the right to claim damages in respect of any breach of the Contract which existed at or before the date of termination or expiry; and clauses which expressly or by implication have effect after termination shall continue in full force and effect.
11.
LAW:
The Contract shall be subject to English law and the English Courts. A person who is not a party to the Contract shall not have any rights under or in connection with it. Either party may refer a dispute arising under the Contract to adjudication at any time under Part I of the Scheme for Construction Contracts (England and Wales) Regulations, which Part shall take effect as if it was incorporated into this clause.
Monodraught Limited
1st November 2012
These Terms and Conditions supersede all previous Terms and Conditions
Page 9
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Guarantee
“Monodraught”
Means Monodraught Limited, Halifax House,
Cressex Business Park, High Wycombe, Bucks HP12 3SE.
“Goods”
Monodraught’s current WINDCATCHER® natural ventilation systems range of goods.
“Registration Documents”
Means the registration documents accompanying this Guarantee.
1. Commencement of the Guarantee:
The Guarantee period shall run from the time the Goods are delivered to the End-user but shall only take effect when the End-user registers the Guarantee by returning the Registration Documents to Monodraught.
2. Extent of the Guarantee:
Monodraught guarantees its Goods to be reasonably free from defects in materials and workmanship when under normal
use. All other warranties and representations, whether express or implied, are excluded to the fullest extent permitted by law. This guarantee shall apply for a period of 10 years (5 years for COOL-PHASE) other than for solar driven and mechanical and electrical components of such Goods for which the period of guarantee shall be 1 year.
The Guarantee shall not apply and Monodraught shall be under no liability in respect of any defect in the Goods arising from:
2.1 the acts or omissions of persons other than Monodraught or its authorised personnel or agents, including but not limited to damage in transit, repairs, modifications or additions made to the Goods by the End-user or any third party;
2.2 failure to perform appropriate maintenance;
2.3 any continued use of the Goods after they exhibit signs of any defect or malfunction;
2.4 carelessness, mishandling, wear and tear, vandalism or unforeseen events;
2.5 use of the Goods contrary to Monodraught’s recommendations;
2.6 any failure or defect in related products or systems which the Goods have been integrated with, operate with or are
dependent on;
2.7 defects in materials or workmanship which are the result of installation by others than Monodraught.
3.
Repair or Replacement under the Guarantee:
Monodraught will at Monodraught’s sole discretion discharge in full any liability to the End-user under this Guarantee by
repairing or replacing the relevant Goods (or any part thereof) at no charge so that the relevant Goods conforms to such
Guarantee, and the Guarantee will continue for the remainder of the period set out in Clause 2.
If in Monodraught’s sole opinion, the End-user is unable to establish breach of the guarantee in Clause 2, the End-user shall be responsible for all costs and expenses incurred by Monodraught in investigating such alleged breach.
4. Data Protection:
Monodraught shall comply at all times with its obligations under the Data Protection Acts 1998 and any other legislation
relating to the protection of personal data.
Page 10
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Guarantee
“End-user”
Means the natural or legal person who owns the Goods and who has not acquired them with a view to re-selling or installing
them in the course of business.
5. Notice:
No notice to be given to Monodraught shall be effective unless given in writing by recorded delivery post which will be
deemed received two (2) business days after posting.
6. Miscellaneous:
6.1 Monodraught may perform any of its obligations or exercise any of its rights under this Guarantee by itself or through any Monodraught subsidiary or holding company or any subsidiary of any such holding company.
6.2 Subject to Clause 6.1, this Guarantee is not intended by the parties to give rise to any right which is enforceable by any third party by virtue of the Contracts (Rights of Third Parties) Act 1999.
6.3 This Guarantee is subject to English Law and the English Courts shall have exclusive jurisdiction over any dispute arising out of or in connection with this Guarantee.
6.4 This Guarantee does not and will not affect your Statutory Rights as a consumer.
Page 11
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SUNPIPE®
Natural Daylight Systems
Page 12
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Domestic SUNPIPE systems
SUNPIPE 230, 300, 450
Sizes available: 230, 300, 450
Monodraught’s SUNPIPE® natural daylight system can be installed on almost any roof type and directs sunlight into a room.
The SUNPIPE collects daylight using a patented Diamond dome, then the MIRO-SILVER® finish aluminium tube transfers the
light to ceiling level before the ceiling diffuser evenly distributes the light around the room without glare. SUNPIPES are suited
to almost any application, and have been installed anywhere from residential bedrooms to the Olympic Handball Arena in
London.
TECHNICAL DETAILS
•
•
MATERIAL:
»» Top Dome 4 mm UV stabilised polycarbonate
(also avilable in 4 mm thick acrylic).
»» SUNPIPE MIRO-SILVER® finish Aluminium.
»» Upstand to suit roof type. Available in ABS,
Galvanised Steel or GRP.
Diamond top dome
Condensation seal
ABS flashing plate
for slate roof
ABS undercloak roofing
felt support
PERFORMANCE:
»» 230: 2160 lumen output in full summer sun (105 Klux). 610 mm long
connecting piece
»» 300: 4460 lumen output in full summer sun (105 Klux).
»» Typical U Value 2.18 W/m²K based on a 1.5 m
45° adjustable
length of SUNPIPE and double skin diffuser.
elbow
•
•
OPTIONS:
»» 610 mm (2ft) extension lengths 30°/45° adjustable
elbows.
»» Motorised light shut off Damper.
»» Security Bars.
»» Integral Electric Light Kit for night use.
»» Fire Collar.
»» Soundguard, Fireguard, Double Glazed and
Square Ceiling Diffusers.
DIMENSIONS 230:
»» 230 mm Dia SUNPIPE.
»» 250 mm Dia roof and ceiling opening required.
•
DIMENSIONS 300:
•
DIMENSIONS 450:
610 mm standard
SUNPIPE length
Plywood backing
plate/template
Bell end slip length
ceiling extension
Fixing ring
Clear or opal
ceiling diffuser
Push-on diffuser
trim in white
acrylic capped
ABS as standard
Page 13
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SUNPIPE 230, 300, 450
GENERAL DESCRIPTION
LIGHT OUTPUT PERFORMANCE
Data for a typical flat roof application measured 1.5 m below SUNPIPE Diffuser
Dia
230 (9”)
300 (12”)
450 (18”)
Full Summer Sun
105 klux
Lux Value
Lumen
Output of the
system
360
2160
760
4460
1820
10770
Overcast Summer
45 klux
Lux Value
Lumen
Output of
the system
170
1045
330
1940
750
4410
Overcast Winter
Lux Value
65
130
300
Lumen
Output of
the system
670
760
1768
Area Lit
7.5 m²
14 m²
22 m²
PRODUCT OPTIONS
1.
1. Security Bars
Provides extra security by means of integrating stainless
steel security bars which do not impact the light output of
the system.
2. Fire Collar
Intumescent ‘Fire Choke’ Fire collars can be integrated
within the system to prevent the spread of smoke and fire
through the roof to give up to 2 hours protection.
3.
3. Integral Electric Lighting Kit
Includes a 50 W extra low voltage Halogen light fitting
and transformer to provide light outside of daylight hours.
4. Fireguard
Fireguard ceiling diffusers can be used in place of the
standard polycarbonate diffusers to provide up to 1 hour
fire resistance.
5.
2.
4.
5. Soundguard
Soundguard ceiling diffusers can be used in place of
the standard polycarbonate diffusers to provide sound
attenuation of up to 37dBa.
6. Motorised Shut off
Features a butterfly light shut-off damper controlled by a
230V motorised actuator for use in areas such as Lecture
Theatres, Conference Halls etc
6.
7.
7. Stainless Steel Effect
8. Double Glazed and Square
SUNPIPEs are supplied with white ABS trim as standard
Ceiling Diffusers are also
but can be available in different finishes to suit their décor.
SUNPIPE options.
Note: Fireguard and Soundguard for 230 mm dia SUNPIPE systems require a ceiling opening of 280 mm dia; for 305 mm dia
SUNPIPE systems, ceiling opening is 350 mm dia and for 457 mm dia SUNPIPE systems, ceiling opening is 505 mm dia.
Page 14
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
PRODUCT VARIANTS
SUNPIPE for Horizontal and Basement Applications
The SUNPIPE natural daylight systems can also be used in horizontal and basement applications.
THERMAL PERFORMANCE U-VALUES (W/m2.K)
Length
Dia
230 (9”)
300 (12”)
450 (18”)
0.5 m
1.57
1.62
1.76
1m
1.46
1.52
1.68
2m
1.39
1.42
1.59
3m
1.34
1.38
1.54
4m
NA
1.37
1.49
5m
NA
1.36
1.46
TYPICAL USES
•
•
•
The 230 SUNPIPE system is typically used within small areas such as an en-suite.
The 300 SUNPIPE system is the most popular domestic kit suitable for lighting most average sized rooms.
The 450 SUNPIPE system is the largest domestic kit and would be suitable for lighting large open spaces.
NBS SPECIFICATIONS
SUNPIPE® SYSTEMS
light to a ceiling level before the ceiling diffuser evenly distributes the light around the room without glare.
•
FEATURES:
»» Glazing details: Clear polycarbonate diamond dome with UV inhibitors, complete with brushed nylon condensation gasket.
»» Lining: MIRO-SILVER® finish aluminium tube in 610 mm lengths.
»» Ceiling diffuser: Prismatic, with white ceiling trim and 3 mm plywood.
•
ADVANTAGES:
»» Generally no structural alterations required, easily fits between joists and rafters.
»» Horizontal and basement applications are possible.
»» No maintenance required.
»» Top domes are self-cleaning due to their shape. A brushed nylon condensation seal eliminates condensation problems.
Page 15
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
•
STANDARDS:
»» BS EN ISO 14001 and BS EN ISO 9001.
»» The Fireguard ceiling diffuser has been tested to comply with BS 476-20: 1987.
»» The fire choke collar has been fully tested to current British and European standards (test report TE 39902):
• Size: 230, 300, 450.
• Roof Terminal:
»» UV-protected polycarbonate Diamond shaped dome OR
»» Impact resistant acrylic Diamond shaped dome
• Ceiling Diffuser:
»» Polycarbonate prismatic diffuser
• Accesories:
»» Adjustable elbows
»» Fire choke collar
»» Fireguard diffuser
»» Integral electric light kit
»» Motorised light shut-off dampers
»» Security fixings
»» Soundguard diffuser
• Ceiling Trim:
»» White (as standard)
»» Stainless steel effect
• Roof Type:
»» Bold rolled tile
»» Felt
»» Membrane
»» Green roof kit
»» Metal
»» Pitched slate
»» Plain Tile
»» As Standard:
• Flashing Type: (as standard)
»» ABS - For pitched slate roofs
»» ABS with weathering skirt - For pitched plain tiled roofs
»» Code 4 lead - For pitched bold rolled tiled roofs
»» Galvanised flashing - For flat roofs
»» Extended galvanised flashing - For green/sedum roofs
»» Options:
Other bespoke arrangements are available. For sizing guidance or further details, please contact Monodraught Head Office.
»» Approvals:
mark
: CHAS registered
Page 16
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Commercial SUNPIPE systems
SUNPIPE 530, 750, 1000
TECHNICAL DETAILS
•
•
•
•
MATERIAL:
»» Top Dome 4mm UV stabilised polycarbonate
(also available in 4 mm thick acrylic).
»» Upstand to suit roof type. Available in ABS,
Galvanised Steel or GRP (for 530 systems).
Diamond top dome
Condensation seal
ABS Collar
PERFORMANCE:
»» Typical U Value 2.18 W/m²K based on a 1.5m
length of SUNPIPE and double skin diffuser.
OPTIONS:
»» 610 mm (2ft) extension lengths.
»» 30°/45° adjustable elbows (for 530mm systems),
fixed elbows (for 750mm,1000mm systems)
»» Security Bars.
»» Fire Collar (for 530 systems).
»» Soundguard, Fireguard, and Square Ceiling
Diffusers (for 530 systems).
»» Double Glazed diffusers.
DIMENSIONS 750:
•
DIMENSIONS 1000:
610 mm standard
SUNPIPE length
Plywood backing
plate/template
Bell end slip length
ceiling extension
Fixing ring
DIMENSIONS 530:
•
Flashing plate (optional
ABS, galvanised or lead)
Clear or opal
ceiling diffuser
Push-on diffuser trim
in white acrylic capped
ABS as standard
Page 17
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SUNPIPE 530, 750, 1000
GENERAL DESCRIPTION
Sizes available: 530, 750, 1000
London.
Dia
530 (21”)
750 (29.5”)
1000 (39.5”)
Full Summer Sun
105 klux
Lux Value
Lumen
Output of the
system
2530
14995
4350
25568
13630
45300
Overcast Summer
45 klux
Lux Value
Lumen
Output of
the system
1050
6265
1975
11620
3850
24650
Overcast Winter
Lux Value
430
900
1425
Lumen
Output of
the system
2550
5300
8390
Area Lit
30 m²
50 m²
60 m²
PRODUCT OPTIONS
1.
1. Security Bars
Provides extra security by means of integrating stainless
steel security bars which do not impact the light output of
the system.
2. Fire Collar
through the roof to give up to 2 hours protection (only for
530).
3.
2.
3. Fireguard
fire resistance (only for 530).
Theatres, Conference Halls etc (for 530 and 750 systems
only).
4.
5.
5. Soundguard
attenuation of up to 37dBa (only for 530).
SUNPIPE options.
Note: Fireguard and Soundguard for 535 mm dia SUNPIPE systems require a ceiling opening of 580 mm dia.
THERMAL PERFORMANCE U-VALUES (W/m2.K)
Length
Dia
530 (9”)
750 (12”)
1000 (18”)
0.5 m
1.80
1.87
1.96
1m
1.73
1.82
1.88
2m
1.64
1.75
1.80
3m
1.58
1.70
1.74
4m
1.54
1.66
1.69
5m
1.51
1.63
1.66
TYPICAL USES
•
•
•
The 530 SUNPIPE: Used in large open spaces such as Large Office and dining areas.
The 750 SUNPIPE: Used in large open areas with room height of approx. 5-7 metres, supermarket for example.
The 1000 SUNPIPE: Used in large open areas with room height of approx. 8-9 metres, warehouses for example.
Page 18
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
NBS SPECIFICATIONS
SUNPIPE® SYSTEMS
light to ceiling level before the ceiling diffuser evenly distributes the light around the room without glare.
•
FEATURES:
»» Glazing details: Clear polycarbonate diamond dome with UV inhibitors, complete with brushed nylon condensation gasket.
»» Lining: MIRO-SILVER® finish aluminium tube in 610 mm lengths.
»» Ceiling diffuser: Prismatic, with white ceiling trim and 3 mm plywood (we do not supply plywood with the 750 or 1000 systems).
•
ADVANTAGES:
»» Generally no structural alterations required, easily fits between joists and rafters.
»» No maintenance required.
»» Top domes are self-cleaning due to their shape, eliminating condensation problems.
•
STANDARDS:
»» BS EN ISO 14001 and BS EN ISO 9001.
»» The FireGuard ceiling diffuser has been tested to comply with BS 476-20: 1987.
»» The Fire Choke collar has been fully tested to current British and European standards (test report TE 39902):
• Size: 530, 750, 1000.
• Roof Terminal:
»» Impact resistant acrylic Diamond shaped dome OR
»» UV-protected polycarbonate Diamond shaped dome
• Ceiling Diffuser:
»» Polycarbonate prismatic diffuser.
• Roof Type:
»» Bold rolled tile (for 530)
»» Felt
»» Membrane
»» Green roof kit
»» Metal
»» Pitched slate (for 530)
»» Plain Tile (for 530)
• Accesories:
»» Adjustable elbows (for 530)
»» Fire Choke collar (for 530)
»» Fireguard diffuser (for 530)
»» Fixed elbows (750 0r 1000)
»» Integral electric light kit (for 530)
»» Motorized light shut-off dampers (530 & 750).
»» Security components (for 530)
»» Soundguard diffuser (for 530)
»» As Standard:
• Flashing Type (as standard):
»» ABS - For pitched slate roofs – Not applicable for 750/1000 systems.
»» ABS with weathering skirt - For pitched plain tiled roofs – Not applicable for 750/1000 systems.
»» Code 4 lead - For pitched profiled tiled roofs – Not applicable for 750/1000 systems.
»» Galvanised - For Flat Felt / Membrane roofs.
»»
»»
Options:
Other bespoke arrangements are available. For sizing guidance or further details, please contact Monodraught Head Office.
Approvals:
mark
: CHAS registered
Page 19
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Square SUNPIPE systems
Sizes available: 300, 450
London.
Monodraught’s Square SUNPIPE® natural daylight system is suited to applications where the room being served has a flat
ceiling, as opposed to a typical loft conversion with a vaulted ceiling where a normal rooflight can be used.
Monodraught’s Square SUNPIPE has been specifically developed to provide an unobtrusive termination tile and slate roofs.
The Square SUNPIPE is used in conjunction with Monodarught’s standard 300 and 450 SUNPIPE kits. The square rooflight
measures 475 mm x 570 mm and includes an adaptor to allow it to fit the 300 or 450 circular SUNPIPE systems. With the
inclusion of an adjustable elbow it is possible to adjust the system to fit any angle of roof pitch.
TECHNICAL DETAILS
•
MATERIAL:
»» Rooflight details: Aluminium, sealed double glazed unit with an outer layer of 3 mm clear float glass, a 8 mm air gap and 3 mm clear float inner glass. Comes complete with transition to suit standard 300 and 450 SUNPIPE systems.
»» SUNPIPE MIRO-SILVER® finish Aluminium. Suitable for Roof Pitches 15° to 60°.
•
PERFORMANCE:
•
OPTIONS:
»» 610 mm (2ft) extension lengths 30°/45° adjustable elbows.
»» Security Bars.
»» Fire Collar.
»» Fireguard.
»» Soundguard.
•
•
15° min.
60° max.
Double glazed unit
Standard SUNPIPE
DIMENSIONS 300:
»» 320 mm Dia ceiling opening required.
»» 470 mm x 570 mm roof opening required.
Adjustable elbow
DIMENSIONS 450:
»» 470 mm Dia ceiling opening required.
»» 470 mm x 570 mm roof opening required.
Page 20
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
GENERAL DESCRIPTION
Dia
300 (12”)
450 (18”)
Full Summer Sun
105 klux
Lux Value
Lumen
Output of the
system
760
4685
1820
1130
Overcast Summer
45 klux
Lux Value
Lumen
Output of
the system
330
2040
750
4630
Overcast Winter
Lux Value
130
300
Lumen
Output of
the system
800
1860
Area Lit
14 m²
22 m²
PRODUCT OPTIONS
1.
1. Integral Electric Lighting Kit
Includes a 50 W extra low voltage Halogen light fitting
and transformer to provide light outside of daylight hours.
2. Fire Collar
through the roof to give up to 2 hours protection.
3.
2.
3. Soundguard
attenuation of up to 37dBa.
Theatres, Conference Halls etc
4.
5.
5. Fireguard
fire resistance (only for 530).
SUNPIPE options.
TYPICAL USES
•
•
The 300 SUNPIPE system is the most popular domestic kit suitable for lighting most average sized rooms.
The 450 SUNPIPE system is the largest Square kit and would be suitable for lighting large open spaces.
Page 21
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
NBS SPECIFICATIONS
300 or 450 SQUARE SUNPIPE SYSTEM
•
Rooflight details: Aluminium, sealed double glazed unit with an outer layer of 3 mm clear float glass, a 8 mm air gap and 3 mm clear float inner glass. Internal flashing apron, comes complete with transition to suit standard 300 and 450 SUNPIPE systems and patented Thermoliner®.
•
Lining: MIRO-SILVER® finish aluminium tube in 610 mm lengths and adjustable elbows to suit installation.
•
Ceiling Diffuser: Prismatic ceiling diffuser.
•
Other requirements: All necessary screws, fixings and brackets to install system to be provided by Monodraught.
•
Accessories: 2 section 30 elbow, 3 section 45 elbow, 610 extension pipe, stainless steel effect ceiling trims, light kit.
•
Provides light to areas where windows cannot reach.
•
SUNPIPE systems are guaranteed for ten years against faulty manufacture.
Page 22
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SUNCATCHER®
Page 23
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
ABS SUNCATCHER systems
Sizes available: 350, 550
The ABS SUNCATCHER® natural daylight and ventilation system combines the principles of the SUNPIPE® natural daylight
and WINDCATCHER® natural ventilation systems in one unit. The system has been used extensively in education facilities and
commercial offices. The design of the system lends itself particularly well to smaller areas where it would not be economical
to fit two separate natural daylight and natural ventilation systems, such as conference and meeting rooms, with each system
having a choice of two SUNPIPE options.
TECHNICAL DETAILS
•
MATERIAL:
»» Top Dome 4mm UV stabilised polycarbonate or acrylic.
»» Terminal ABS construction.
•
PERFORMANCE 350 (complete with 230 SUNPIPE):
»» Provides 16 l/s with an external wind speed of 4 m/s.
»» 230 SUNPIPE can light an area up to 7.5 m².
•
PERFORMANCE 550 (complete with 300 SUNPIPE):
»» Class ‘A’ BSRIA tested weathering performance.
»» Provides 62 l/s with an external wind speed of 4m/s.
»» 300 mm Dia SUNPIPE can light an area up to 14m².
•
OPTIONS 350 & 550:
»» Security Bars.
»» Fire Collar.
•
DIMENSIONS 350:
»» 430 mm Dia external terminal.
»» 320 mm Dia trunk.
»» Protrudes approximately 450 mm above a flat roof.
»» 230 or 305 mm Dia SUNPIPE system.
»» 320 mm Dia roof opening required.
»» Ceiling opening varies, dependant on grille type.
•
UV protected
polycarbonate top
dome
Brushed Nylon
condensation trap
positioned between
dome and collar
DIMENSIONS 550:
»» 625 mm Dia external terminal.
»» 530 mm dia trunk.
»» Protrudes approximately 650 mm above a flat roof.
»» 300 or 450 mm Dia SUNPIPE system.
»» 550 mm Dia roof opening required.
»» Ceiling opening varies, dependant on grille type.
Page 24
Drop rods and
unistrut support
frame
Trimmers by others, required
to support galvanised ceiling
transition. Alternativelly
transition will be supported
by wires
Required ceiling
opening
Ventilating
ceiling diffuser
arrangement
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
GENERAL DESCRIPTION
350 SUNCATCHER SYSTEM
Dia
230 (9”)
300 (12”)
Full Summer Sun
105 klux
Lux Value
Lumen
Output of the
system
360
2160
760
4460
Overcast Summer
45 klux
Lux Value
Lumen
Output of
the system
170
1045
330
1940
Overcast Winter
Lux Value
65
130
Lumen
Output of
the system
670
760
Area Lit
7.5 m²
14 m²
Dia
300 (12”)
450 (18”)
Full Summer Sun
105 klux
Lux Value
Lumen
Output of the
system
760
4460
1820
10770
Overcast Summer
45 klux
Lux Value
Lumen
Output of
the system
330
1940
750
4410
Overcast Winter
Lux Value
130
300
Lumen
Output of
the system
760
1768
Area Lit
14 m²
22 m²
PRODUCT VARIANTS
Hemispherical Dome Diffuser
NBS SPECIFICATIONS
SUNCATCHER® natural ventilation and daylight system
The Monodraught SUNCATCHER systems are a method of effectively conveying natural daylight and natural ventilation from
roof level down into the building below by combining the principles of the WINDCATCHER® natural ventilation system with
Monodraught’s SUNPIPE® natural daylight system.
Page 25
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
The SUNCATCHER system is divided internally into four quadrants so that whichever direction the wind is blowing one or
more quadrants is facing into the wind. The windward quadrants supply air under the action of positive wind pressure, and the
leeward quadrants extract stale air under the action of negative wind pressure. On still days, the SUNCATCHER system acts
as a conventional passive stack system using the natural buoyancy of warm internal air to stimulate air flow out of the building.
The SUNPIPE collects daylight using a patented Diamond dome, then the silverised mirror-finished aluminium tube transfers
light to the room, and finally the ceiling diffuser evenly distributes the light around the room without glare.
•
FEATURES:
»» Type: ABS 350, ABS 550.
»» Shape: Circular.
»» Controls: Manual.
»» Outer Casing: ABS.
»» Ceiling grille: White hit/missed grille or white powder coated eggcrate.
•
ADVANTAGES:
»» Cost effective: No running costs or energy consumption.
»» Healthier system: Brings a steady supply of fresh air into the building, whilst at the same time expelling stale air to the atmosphere.
»» Is sustainable energy in action: Does not use any fossil fuelled energy but relies on harnessing wind power and the thermal rise of warm air.
»» Night time cooling.
»» SUNPIPE top domes are self-cleaning due to their shape.
»» Evenly diffused natural daylight provided to internal spaces.
•
STANDARDS:
»» Complies with Building Regulations (E&W) Approved Document F in providing a Passive Stack Ventilation (PSV) system in accordance with BRE Paper, Reference 13/94. Manufactured in compliance with BS EN ISO 14001 and BS EN ISO 9001.
»» Internal Airways:
Airway protected internally with mesh.
»» Colour:
• ABS - Dark Grey (RAL 7010).
»» Options:
Bespoke systems are also available. For sizing guidance or further details, please contact Monodraught Head Office.
»» Approvals:
: CHAS registered
Page 26
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SOLA-VENT®
Page 27
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SOLA-VENT systems
SOLA-VENT 230, 300
Sizes available: 230, 300.
The SOLA-VENT® solar powered daylight and extract system is a fully integrated bathroom light and ventilation kit,
incorporating the SUNPIPE® natural daylight system, two compact halogen downlighters and a solar powered extract fan all
in one unit. The system is ideal for bathrooms and shower rooms where ventilation is essential.
230 SOLA-VENT System: This system incorporates a 230 SUNPIPE, a solar powered extract fan and two
compact‑flourescent downlighters. The system is ideally suited to internal bathrooms and shower rooms to meet current
Building Regulations to provide 15 l/s extract ventilation.
300 SOLA-VENT System: This is designed for larger areas, such as kitchens and utility areas, utilising the 300 SUNPIPE,
which provides approximately twice as much natural light as the smaller 230 SOLA-VENT system. It also incorporates a higher
rated fan. When these systems are used on commercial applications, such as Schools or Office areas, the overall performance
of the SOLA-VENT system actually increases.
Both systems also have an option for a mains powered back-up facility whereby if the system is intended for use for long hours
than designed for, the mains supply can charge the battery pack should the batteries fall below the threshold voltage provided
by the solar panel.
TECHNICAL DETAILS
•
MATERIAL:
»» Top Dome 4mm UV stabilised polycarbonate or acrylic.
»» Flashing ABS construction with integral vent outlet.
»» SUNPIPE Super Silver mirror finish Aluminium.
•
PERFORMANCE 230:
»» Provides 15 l/s extract.
»» 230 mm Dia SUNPIPE can light an area up to 7.5 m².
»» 15 W Polycrystalline silicon Photovoltaic panel charges AGM battery.
•
PERFORMANCE 300:
»» Provides 30 l/s extract.
»» 305 mm Dia SUNPIPE can light an area up to 14 m².
»» 40 W Polycrystalline silicon Photovoltaic panel charges AGM battery.
•
OPTIONS:
»» Sirroco ceiling diffuser.
Page 28
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SOLA-VENT 230, 300
GENERAL DESCRIPTION
•
DIMENSIONS 230:
»» 680 x 735 mm flashing plate.
»» 580 x 350 mm ceiling opening required.
»» 230 mm Dia SUNPIPE system.
»» Ventilating ceiling diffuser arrangement.
•
DIMENSIONS 300:
»» 890 x 935 mm flashing plate
»» 660 x 460 mm ceiling opening required
»» 300 mm Dia SUNPIPE system
»» Ventilating ceiling diffuser arrangement
Dia
230 (9”)
300 (12”)
Full Summer Sun
105 klux
Lux Value
Lumen
Output of the
system
360
2160
760
4460
Overcast Summer
45 klux
Lux Value
Lumen
Output of
the system
170
1045
330
1940
Overcast Winter
Lux Value
65
130
Lumen
Output of
the system
670
760
Area Lit
7.5 m²
14 m²
PRODUCT VARIANTS
Sirroco Ceiling Diffuser
Vents
Light
Light
PIR
Diffuser Dome
Page 29
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WIRING DETAILS
Control Box
Battery
2.1 mm barnell jack
Solar Panel
3-way connector
2-way connector
4-way connector
Mains
Switching Adaptor
Fan
PIR Sensor
Page 30
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER X-AIR®
Natural Ventilation Systems
Page 31
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
X-AIR systems
WINDCATCHER X-AIR
Sizes available: 110, 140, 170, 200.
The WINDCATCHER X-AIR is a the next generation of natural ventilation system featuring Monodraught patented
ACTIVLOUVRE® modulating aerofoil louvre technology. The system consists of an external static louvre and internal active
louvre arrangement, which varies the opening and free area through the louvre face. The variable louvres can provide
maximum ventilation rates when fully open or modulated to vary weather resistance or closed to prevent the ingress of
precipitation allowing Monodraught to have our unic no leak guarantee.
In addition to the ACTIVLOUVRE arrangement, the system also incorporates external air catchment fins to provide greater
area at the louvre improving performance in relation to wind speed. Pressure release vanes at the fins provide a means to
reduce face pressure under high winds. The systems can also be specified to include solar powered architectural lighting.
TECHNICAL DETAILS
•
MATERIAL:
»» Injection Moulded ASA.
»» Extruded ABS.
»» 6063 Aluminium extrusion.
»» 10W Monocrystalline photovoltaic solar panel
(LED version only).
•
OPTIONS:
»» Colours (RAL 7037 Dusty Grey / RAL 7038 Agate Grey).
»» Architectural LED lighting (white / blue /green).
»» Acoustic foam (25 mm, 50 mm).
»» GRP extended colour-matched skirt (to suit roof pitch
from 15 – 35 degrees).
•
•
GUARANTEE:
»» 10 year limited warranty.
PERFORMANCE 110:
• DIMENSIONS 110:
»» Fire - DIN EN 13501-1: 2010-01 (Class E).
»» 850 mm (w) x 850 mm (d).
»» Sound - BS EN 20140-10:1992.
»» 980 mm (h) – (Standard).
»» Sound - ISO 140-10:1991.
»» 1020 mm (h) – (LED Architectural version).
»» Power supply range; 19.2 – 28.8 V DC. 0 – 10 V.
»» 50 mm high louvre opening.
»» Power consumption; 2 W @ nominal force, 0.4 W at »» 90 mm louvre pitch.
rest.
»» 6 louvre openings.
»» Actuating force; 450 N @ nominal voltage. Running »» 0.244 m² free area per face.
time; 150 s / 100 mm.
»» Actuating force; 10 Nm @ nominal voltage. Running time; 150 s / 95° (for volume control damper).
• WEIGHT 110:
»» IP54 rated actuator motors
»» 55 kg Net (excluding packaging).
Page 32
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER X-AIR
GENERAL DESCRIPTION
•
PERFORMANCE 140:
• DIMENSIONS 140:
»» 1047 mm (w) x 1047 mm (d).
»» Sound - BS EN 20140-10:1992.
»» 1158 mm (h) – (Standard).
»» Sound - ISO 140-10:1991.
rest.
time; 150 s / 100 mm.
• WEIGHT 140:
»» IP54 rated actuator motors.
•
PERFORMANCE 170:
• DIMENSIONS 170:
»» 1247 mm (w) x 1247 mm (d).
»» Sound - BS EN 20140-10:1992.
»» 1337 mm (h) – (Standard).
»» Sound - ISO 140-10:1991.
rest.
time; 150 s / 100 mm.
• WEIGHT 170:
•
PERFORMANCE 200:
• DIMENSIONS 200:
»» 1247 mm (w) x 1247 mm (d).
»» Sound - BS EN 20140-10:1992.
»» 1337 mm (h) – (Standard).
»» Sound - ISO 140-10:1991.
»» Power supply range; 19.2 – 28.8V DC. 0 – 10V.
rest.
time; 150 s / 100 mm.
»» Actuating force; 10Nm @ nominal voltage. Running time; 150 s / 95° (for volume control damper).
• WEIGHT 200:
Page 33
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WIRING DETAILS
•
Cable Specification:
»» Farnell: 1190288.
»» RS: 660-4099.
»» Electrical Wholesaler
Reference: 16-2-6A.
»» Number of Cores: 6.
»» CSA: 0.5 mm².
»»
»»
»»
»»
»»
»»
Screened: No.
Voltage Rating: 440Vac.
Current Rating: 2.5A.
Core Strands: 16/0.2 mm.
Outside Dia: 7.7 mm.
Insulation Material: PVC.
Wiring for Master connection box out to slave units in the same control zone should use 4 core cable (16-2-4A. RS: 660-4096 or Farnell 1190286), and
only the Blue, Green, Yellow and Red cables are connected to the subsequent slave systems. (The feedback lines MUST NOT be commoned between
systems).
PRODUCT VARIANTS
Standard
•
1015
• X-AIR 110 - LED
974
846
• X-AIR 110 – Standard
LED Architectural Lighting
846
•
846
846
Page 34
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
1046
1195
1046
• X-AIR 140 - LED
1154
1046
1046
1375
1247
• X-AIR 170 - LED
1333
1247
1247
1247
1568
1447
• X-AIR 200 - LED
1528
1447
1447
1447
Page 35
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
ACOUSTIC PERFORMANCE
* Designates measurement corrected for background.
## Designates limit of measurement due to background.
%% Designates limit of measurement due to background.
$$ Designates limit of measurement due to flanking.
++ Designates frequency beyond standard.
X-AIR 140
(CLOSED)
X-AIR 140
(OPEN)
Frequency
(Hz)
X-AIR 140
(CLOSED)
25 mm Acoustic Foam
X-AIR 140
(OPEN)
25 mm Acoustic Foam
X-AIR 140
(CLOSED)
50 mm Acoustic Foam
X-AIR 140
(OPEN)
50 mm Acoustic Foam
Element normalised level difference
Dn,e dB
1/3 Oct 1/1 Oct 1/3 Oct 1/1 Oct 1/3 Oct 1/1 Oct 1/3 Oct 1/1 Oct 1/3 Oct 1/1Oct 1/3 Oct 1/1 Oct
100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150
4000
5000
6300 +
8000 +
1000 +
Average
100-3150
Dn,e,w (C;Ctr) =
30.8 $
29.6
31.1
34.0 %
34.2
31.4 33.00
34.0
35.3
36.8
36.5
37.6
37.8
38.1
38.0
38.2
37.2
38.6
38.7
41.1
45.1
44.4
44.6
44.2
41.7
40.5
41.4
42.4
12.8
14.7
17.8
18.5
15.5
17.3
16.6
18.8
18.8
18.1
18.3
17.3
17.4
17.8
18.3
19.1
19.6
19.8
20.5
19.4
20.2
14.7
61.9
17.9
17.9
17.8
19.5
20.0
25.7 %
25.8
32.0
30.6
29.1
32.5
33.4
35.2
36.9
37.2
39.9
42.6
43.1
46.0
49.1
53.9
52.1
53.6
49.8
47.3
48.1 %
27.0
30.5
34.9
34.9
45.4
53.1
48.3
11.4
15.1
18.1
19.8
16.8
19.1
20.2
22.3
23.5
23.6
26.2
26.3
25.6
27.3
28.5
28.7
29.4
31.3
30.5
28.7
29.4
14.0
18.4
21.8
25.2
26.9
29.7
29.5
31.1 $
31.5 %
37.6 %
35.3
34.8
38.9
40.8
41.1
42.6
44.1
46.1
49.1
49.8
52.2
54.5
59.3
57.7
58.0
54.0
52.1
52.8 $
32.5
36.0
41.4
46.0
51.8
58.3
52.9
12.8
16.5
21.4
22.3
20.0
22.6
23.3
24.6
26.5
26.8
28.5
29.2
29.5
30.4
30.7
32.7
33.0
33.9
34.5
32.5
32.9
15.7
21.5
24.6
28.1
30.2
33.2
33.2
36.2
17.3
37.1
22.0
43.1
24.9
38 (0;-1) dB
18 (0;0) dB
39 (0;-3) dB
25 (0;-3) dB
46 (-1;-4) dB
28 (-1;-3) dB
Rating according to BS EN ISO 717-1:1997.
Page 36
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
X-AIR 170
(CLOSED)
X-AIR 170
(OPEN)
Frequency
(Hz)
X-AIR 170
(CLOSED)
25 mm Acoustic Foam
X-AIR 170
(OPEN)
25 mm Acoustic Foam
X-AIR 170
(CLOSED)
50 mm Acoustic Foam
X-AIR 170
(OPEN)
50 mm Acoustic Foam
Dn,e dB
100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150
4000
5000
6300 +
8000 +
1000 +
Average
100-3150
Dn,e,w (C;Ctr) =
26.0 %
25.8
30.4 %
25.4
26.3
29.8
31.9
31.2
33.0
32.4
33.2
34.1
34.5
36.3
39.5
42.6
39.9
39.3
38.4
37.4
39.8
26.9
26.8
39.9
33.2
36.3
40.4
38.4
9.8
11.2
16.3
13.9
12.7
15.2
15.0
14.3
14.6
15.0
15.0
14.1
14.0
15.5
16.1
16.6
16.6
16.9
17.5
16.3
16.7
11.7
13.8
14.6
14.7
15.1
16.7
16.8
21.4
23.3
28.3
23.2
24.9
27.6
30.3
31.1
34.2
35.7
37.1
38.7
40.2
43.4
47.6
51.8
48.6
48.0
45.3
43.3
44.7
23.5
24.9
31.6
37.0
42.8
49.2
44.3
9.4
12.9
18.8
14.3
13.8
16.6
27.5
17.4
20.6
20.9
22.6
22.6
23.0
24.3
25.3
26.5
26.9
28.4
28.4
26.0
26.7
12.3
14.7
18.3
22.0
24.1
27.2
26.9
21.6
24.8
27.9
24.1
26.9
28.9
31.5
32.2
34.9
36.1
37.4
39.1
40.4
43.4
47.1
52.0
49.8
49.2
46.2
44.5
46.8 %
24.0
26.2
32.6
37.3
42.8
50.2
45.7
9.6
14.1
20.7
15.9
16.5
19.2
19.1
19.0
21.7
21.9
23.3
23.7
23.6
25.1
26.1
27.1
28.3
29.7
29.0
27.1
28.8
12.8
17.0
19.8
22.9
24.8
28.2
28.2
32.0
14.3
33.7
19.2
34.7
20.4
34 (0;-2) dB
15 (0;0) dB
36 (-1;-4) dB
22 (-1;-3) dB
37 (-1;-4) dB
23 (0;-2) dB
Page 37
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
X-AIR 200
(CLOSED)
X-AIR 200
(OPEN)
Frequency
(Hz)
X-AIR 200
(CLOSED)
25 mm Acoustic Foam
X-AIR 200
(OPEN)
25 mm Acoustic Foam
X-AIR 200
(CLOSED)
50 mm Acoustic Foam
X-AIR 200
(OPEN)
50 mm Acoustic Foam
Dn,e dB
100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150
4000
5000
6300 +
8000 +
1000 +
Average
100-3150
Dn,e,w (C;Ctr) =
19.2
22.5
23.1
22.7
24.5
24.6
26.7
27.1
27.5
27.7
27.3
28.9
29.2
31.1
34.4
37.9
36.1
35.0
37.0
36.1
37.3
21.2
23.9
27.1
27.9
31.1
36.2
36.8
8.9
11.2
14.6
13.0
12.8
13.8
13.9
13.6
13.3
13.9
13.3
13.0
13.2
14.9
15.3
15.6
16.2
16.7
17.5
16.1
17.8
11.0
13.1
13.3
13.4
14.4
16.1
17.1
22.1
26.1
25.3
24.8
28.2
29.3
30.9
32.8
34.2
35.3
36.3
38.3
39.7
42.7
46.9
51.5
49.5
48.2
49.0
48.6
49.9 %
24.2
27.0
32.4
36.5
42.2
49.5
49.2
9.5
13.1
14.5
13.6
14.2
15.7
16.3
17.3
18.3
19.2
20.5
20.7
21.1
22.7
23.7
24.5
25.4
26.8
26.9
25.4
26.3
11.8
14.4
17.2
20.1
22.4
25.5
26.1
24.2
28.7
26.6
29.4
30.9
31.7
33.9
35.7
36.6
37.0
38.3
40.6
42.7
45.0
48.6
53.2
51.5
50.4
50.9
50.1
51.0 $
26.1
30.5
35.3
38.4
44.8
51.5
50.6
9.5
15.1
15.7
16.0
17.3
17.9
18.6
19.9
20.0
20.5
21.3
22.0
21.6
23.7
24.8
26.1
26.5
27.8
27.8
25.8
26.4
12.5
17.0
19.5
21.2
23.2
26.8
26.6
27.2
13.4
34.0
17.8
36.4
19.4
29 dB
14 dB
36 dB
21 dB
39 dB
22 dB
Page 38
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
X-AIR systems
SOLA-BOOST X-AIR
Sizes available: 140, 170, 200.
The SOLA-BOOST X-AIR is the next generation of natural ventilation system featuring the patented ACTIVLOUVRE®
modulating aerofoil louvre technology and DC solar powered fan controlled by Monodraught’s PowerTrack™ system.
The system consists of an external static louvre and internal active louvre arrangement, which varies the opening and free area
through the louvre face. The variable louvres can provide maximum ventilation rates when fully open or modulated to vary the
weather resistance or closed to prevent the ingress of precipitation.
A fan served by a central core provides intake or extract air (intake as standard), powered by solar panels situated at within the
system capping. The fan is designed to provide the additional ventilation when it is need most, during summer, but with zero
running cost. In order to maximise the performance of the solar powered fan, the system utilises the PowerTrack™ control
system, which maximises the solar output to provide a smooth current from the solar panels and optimised fan flow.
In addition to the ACTIVLOUVRE arrangement, the system also incorporates external air catchment fins to provide greater
area at the louvre improving performance in relation to wind speed. Pressure release vanes at the fins provide a means to
reduce face pressure under high winds. The systems can also be specified to include solar powered architectural lighting.
TECHNICAL DETAILS
•
MATERIAL:
»» Injection Moulded ASA.
»» Extruded Luran ABS.
»» 6063 Aluminium extrusion.
»» 10W Monocrystalline photovoltaic solar module.
»» 4 x 15W Monocrystalline photovoltaic solar modules.
•
OPTIONS:
»» Colours (RAL 7037 Dusty Grey / RAL 7038 Agate Grey).
»» Architectural LED lighting (white / blue /green).
»» GRP extended colour-matched skirt
(to suit roof pitch from 15 – 35 degrees).
•
GUARANTEE:
Page 39
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SOLA-BOOST X-AIR
GENERAL DESCRIPTION
•
PERFORMANCE 140:
• DIMENSIONS 140:
»» 1047mm (w) x 1047mm (d).
»» Sound - BS EN 20140-10:1992.
»» 1405 mm (h).
»» Sound - ISO 140-10:1991.
»» 90 mm louvre pitch.
»» Power consumption; 2 W @ nominal force, 0.4 W at »» 12 louvre openings.
rest.
»» 0.421 m² free area per face (Natural Ventilation).
»» Actuating force; 450 N @ nominal voltage. Running »» 0.105 m² free area per face (Fan opening).
time; 150 s / 100 mm.
»» Actuating force; 10 Nm @ nominal voltage.
»» Running time; 150 s / 95° (for volume control damper).
• WEIGHT 140:
»» P54 rated actuator motors.
»» 260 l/s maximum fan flow.
•
PERFORMANCE 170:
• DIMENSIONS 170:
»» 1247mm (w) x 1247mm (d).
»» Sound - BS EN 20140-10:1992.
»» 1585 mm (h).
»» Sound - ISO 140-10:1991.
rest.
time; 150 s / 100 mm.
• WEIGHT 170:
•
PERFORMANCE 200:
• DIMENSIONS 200:
»» 1247mm (w) x 1247mm (d).
»» Sound - BS EN 20140-10:1992.
»» 1780 mm (h).
»» Sound - ISO 140-10:1991.
rest.
time; 150 s / 100 mm.
• WEIGHT 200:
Page 40
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WIRING DETAILS
•
»» Farnell: 1190286.
»» RS: 660-4096.
Reference: 16-2-6A.
»» CSA: 0.5 mm².
»»
»»
»»
»»
»»
»»
Screened: No.
Monodraught provides a 10m long Cat 5E network cable, as standard, for connecting to wall mounted controller. Should additional length be required,
these must be straight wired to TIA/EIA-568-B RJ45 wiring standard (T-568B at both ends].
PRODUCT VARIANTS
1401
1046
1046
1246
1778
1445
1581
1246
1445
Page 41
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
VENTSAIR
Page 42
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
VENTSAIR systems
The VENTSAIR Roof Mounted Terminals have a similar appearance to the standard WINDCATCHER systems but have a
different internal configuration to allow for dedicated intake or exhaust requirements. The systems are often used in conjunction
with other ventilation items to employ a cross ventilation strategy.
TECHNICAL DETAILS
•
MATERIAL:
»» Roof terminal GRP construction in class 1
fire retardant resin with GRP airways.
»» Outer Casing: Glass-fibre construction in Class 1
fire retardant resin.
»» Internal Airways: GRP airway protected internally
with Trilayer Weather Protection.
•
OPTIONS:
»» GRP construction.
•
PERFORMANCE:
»» Class ‘A’ BSRIA tested weathering performance.
»» Anti-Bird Mesh.
»» Trilayer Weather Protection.
•
DIMENSIONS:
»» GRP systems manufactured to any bespoke arrangement.
•
GUARENTEE:
Stale air
out
Trilayer Weather
Protection
Weatherproof
louvres
Motorised volume
control dampers
Ceiling Diffuser
Page 43
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
GENERAL DESCRIPTION
NBS SPECIFICATIONS
VENTSAIR ROOF MOUNTED SYSTEMS
•
GENERAL:
»» Manufacturer: Monodraught Ltd, Halifax House, Cressex Business Park, High Wycombe, Bucks HP12 3SE,
Tel: 01494 897700, Fax: 01494 532465.
»» Type: Monodraught VENTSAIR roof mounted passive ventilation system.
»» Outer Casing: Glass-fibre construction in Class 1 fire retardant resin.
»» Internal Airways: GRP airway protected internally with plastic anti-bird mesh.
»» Capping: GRP construction.
»» Kerb: Roofers prepared kerb upstand to suit associated roof.
»» Volume Control Dampers with 24Volt actuator.
»» Ceiling Grilles: White powder coated eggcrate or linear bar grilles.
»» Controls: Automatic control: iNVent programmable control system with night-time cooling facility, temperature sensors and manual override – Contractor to allow for internal electrical wiring.
•
EXECUTION: MONODRAUGHT VENTILATION SYSTEMS
»» Installation: Install in accordance with the manufacturer’s recommendations.
»» Access above 3 m and hoisting to be provided by Main Contractor.
•
COMPLETITION: COMMISSIONING
»» Monodraught ventilation system: Submit records to demonstrate that commissioning of the system has taken place. Confirm that the system has been set up and is working within the parameters recommended by the system manufacturer.
»» Operation: Examine system. Test the operation of equipment, controls and sensors. Verify correct operation. Submit report.
»» Wiring: Electrical and Control wiring to be carried out by an electrical contractor.
•
OPERATION AND MAINTENANCE:
»» Operating and maintenance instructions: Submit copies of manufacturers’ operating and maintenance instructions for equipment and controls.
»» Monodraught VENTSAIR roof mounted systems are covered by a 10 year guarantee.
»» Dampers and Controls fitted with Monodraught systems will be covered by standard manufacturer’s warranty.
Page 44
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER®
Page 45
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER systems
Sizes available: 95, 125, 155, 185, 225.
The WINDCATCHER CLASSIC is an energy free natural ventilation system encompassing the benefits of both top-down and
passive stack ventilation. The system consists of an external louvre protected internally by a Trilayer Weather Protection and
internally divided. The simple, but effective design of the system provides fresh air during the daytime as well as night-time
cooling. When coupled with Monodraught’s iNVent control system (or similar BMS), and operated under Monodraught proven
strategy, the system is capable of providing temperature and CO2 demand controlled ventilation, by means of energy efficient
motorised volume control dampers.
Due to the flexibility of the WINDCATCHER CLASSIC, the system can be tailored to suit the needs of almost any area. The
systems technological ability has been proven within schools, colleges, healthcare environments, commercial properties as
well as many other areas.
TECHNICAL DETAILS
•
MATERIAL:
»» GRP Glass fibre reinforced.
»» Colour match gel coat finish.
•
OPTIONS:
»» Colours; Available in any RAL or BS 4800
colour (Excludes RAL & BS metallic finishes).
»» Truncated Capping (to suit specified pitch).
»» Modified & extended skirt arrangements (to suit
specified roof pitch and alternate upstand
arrangements, on request).
•
GUARANTEE:
•
PERFORMANCE:
»» Fire – BS 476-3:2004 / BS 476-24:1987.
»» Sound - BS EN 20140-10:1992.
»» Power consumption; 2W @ nominal force, 0.4 W at rest, 4 VA (wire sizing).
»» IP54 rated actuator motor.
•
Page 46
DIMENSIONS:
»» Dim A: Capping Width.
»» Dim B: Capping Height.
»» Dim C: Louvre Height.
»» Dim D: Skirt Height.
»» Dim E: Trunk Length.
»» Dim F: Trunk Width.
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
GENERAL DESCRIPTION
WINDCATCHER Classic Systems (Square) - Dimensions
System Size Capping
Width
Dim A
95
706
125
906
155
1106
185
1206
225
1506
Capping
Height
Dim B
245
271
298
325
363
Louvre Skirt
Trunk
Trunk Weight
Height Height Length Width
Dim C Dim D# Dim E# Dim F
kg
460
150
278
600
49
600
150
278
800
74
740
150
278
1000
155
880
150
278
1200
157
1090
150
278
1500
214
No. of Louvres
7
9
11
13
16
Louvre free
area / face
m2
0.196
0.324
0.484
0.531
0.804
## Dimension may change subject to roof construction, pitch, roof thickness, installaion method and upstand requirements.
All dimension shown in mm.
WIRING DETAILS
•
»» Farnell: 1190282.
»» RS: 660-4087.
Reference: 16-2-3A.
»» CSA: 0.5 mm².
»»
»»
»»
»»
»»
»»
Screened: No.
Page 47
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
PRODUCT VARIANTS
Truncated Capping
A
• WINDCATCHER CLASSIC – Truncated Capping
B
A
F
C
• WINDCATCHER CLASSIC – Standard Capping
•
D
Standard Capping
E
•
Page 48
F
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER systems
Sizes available: 95, 125, 155, 185, 225.
TECHNICAL DETAILS
•
MATERIAL:
•
OPTIONS:
»» Colours; Available in any RAL or BS 4800 colour
(Excludes RAL & BS metallic finishes).
»» Modified & extended skirt arrangements (to suit specified
roof pitch and alternate upstand arrangements, on request).
•
PERFORMANCE:
»» Fire – BS 476-3:2004 / BS 476-24:1987.
»» Sound - BS EN 20140-10:1992.
»» Actuating force; 10 Nm (for systems up to 155) & 20 Nm (for systems 155 and larger)
@ nominal voltage. Running time; 150 s / 95° (for volume control damper).
•
Page 49
•
GUARANTEE:
DIMENSIONS:
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
GENERAL DESCRIPTION
PRODUCT VARIANTS
WINDCATCHER Classic Systems (Circular) - Dimensions
System Size Capping Capping Louvre Skirt
Trunk Trunk
Weight No. of
Width
Height Height Height Length Width
Louvres
Dim A Ø Dim B Dim C Dim D# Dim E# Dim F Ø Dim G Ø
kg
95
900
203
460
150
278
600
800
52
7
125
1100
223
600
150
278
800
1000
78
9
155
1300
238
740
150
278
1000
1200
118
11
185
1500
250
880
150
278
1200
1400
156
13
225
1800
263
1090
150
278
1500
1700
214
16
Louvre free
area / face
m2
0.154
0.255
0.484
0.380
0.804
WIRING DETAILS
•
»» Farnell: 1190282.
»» RS: 660-4087.
Reference: 16-2-3A.
»» CSA: 0.5 mm².
•
»»
»»
»»
»»
»»
»»
Screened: No.
• WINDCATCHER CLASSIC 95 – Circular
Windcatcher Circular
Page 50
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER systems
WINDCATCHER CLASSIC RCT (Rectangular)
TECHNICAL DETAILS
• MATERIAL:
•
OPTIONS:
•
GUARANTEE:
WIRING DETAILS
•
»»
»» Farnell: 1190282.
»»
»» RS: 660-4087.
»» Electrical Wholesaler »»
»»
Reference: 16-2-3A.
»» Number of Cores: 3. »»
»»
»» CSA: 0.5 mm².
Screened: No.
Page 51
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER CLASSIC (Rectangular)
GENERAL DESCRIPTION
WINDCATCHER systems
WINDCATCHER CLASSIC OVL (Oval)
strategy, the system is capable of providing temperature and CO2 demand controlled ventilation, by means of energy
efficient motorised volume control dampers.
TECHNICAL DETAILS
•
MATERIAL:
•
OPTIONS:
•
GUARANTEE:
WIRING DETAILS
•
»»
»» Farnell: 1190282.
»»
»» RS: 660-4087.
»» Electrical Wholesaler »»
»»
Reference: 16-2-3A.
»» Number of Cores: 3. »»
»»
»» CSA: 0.5 mm².
Screened: No.
Page 52
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER CLASSIC (Oval)
GENERAL DESCRIPTION
WINDCATCHER systems
WINDCATCHER CLASSIC BESPOKE (BSK)
Due to the flexibility of the WINDCATCHER CLASSIC BSK, the system can be tailored to suit the needs of almost any area.
The flexibility of the design of the system also allows for it to fit with almost any building design providing a seamless look or a
striking effect. Whatever is required the WINDCATCHER CLASSIC BSK can be made to exacting requirements.
TECHNICAL DETAILS
•
MATERIAL:
•
OPTIONS:
»» Modified & extended skirt arrangements (to suit specified roof
pitch and alternate upstand arrangements, on request).
•
GUARANTEE:
WIRING DETAILS
•
»» Farnell: 1190282.
»» RS: 660-4087.
Reference: 16-2-3A.
»» CSA: 0.5 mm².
»»
»»
»»
»»
»»
»»
Screened: No.
Page 53
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER CLASSIC (Bespoke)
GENERAL DESCRIPTION
WINDCATCHER systems
Sizes available: 95, 125, 155, 185, 225.
The WINDCATCHER HERITAGE is an energy free natural ventilation system encompassing the benefits of both top-down and
passive stack ventilation. The system consists of an external louvre protected internally by a Trilayer Weather Protection
and internally divided. In addition to the standard WINDCATCHER components, the HERITAGE systems visual construction
enables it to fit aesthetically with many traditional building styles, whilst providing fresh air during the daytime as well
as night‑time cooling. When coupled with Monodraught’s iNVent control system (or similar BMS), and operated under
Monodraught proven strategy, the system is capable of providing temperature and CO2 demand controlled ventilation, by
means of energy efficient motorised volume control dampers.
Due to the flexibility of the WINDCATCHER HERITAGE, the system can be tailored to suit the needs of almost any area. The
TECHNICAL DETAILS
•
MATERIAL:
•
OPTIONS:
»» Top finial (Optional), weathervane, clock face.
»» Modified & extended skirt arrangements (to suit specified roof
pitch and alternate upstand arrangements, on request).
•
PERFORMANCE:
»» Fire – BS 476-3:2004 / BS 476-24:1987.
»» Sound - BS EN 20140-10:1992.
•
Page 54
•
GUARANTEE:
DIMENSIONS:
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
GENERAL DESCRIPTION
PRODUCT VARIANTS
Trunk Trunk
Width
Dim A
Dim B Dim C Dim D# Dim E# Dim F
95
1000
466
460
220
278
600
125
1200
524
600
220
278
800
155
1400
563
740
220
278
1000
185
1600
652
880
220
278
1200
225
2000
675
1090
220
278
1500
Dim G
236
236
236
236
236
Weight No. of
Louvres
kg
55
7
79
8
118
11
158
13
215
16
Louvre free
area / face
m2
0.194
0.256
0.484
0.676
1.024
WIRING DETAILS
•
»» Farnell: 1190282.
»» RS: 660-4087.
Reference: 16-2-3A.
»» CSA: 0.5 mm².
•
»»
»»
»»
»»
»»
»»
Screened: No.
• WINDCATCHER HERITAGE
Heritage
Page 55
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SOLA-BOOST®
Page 56
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SOLA-BOOST systems
Sizes available: 95, 125, 155, 185, 225.
The SOLA-BOOST CLASSIC is an energy free natural ventilation system encompassing the benefits of both topdown and
passive stack ventilation and DC solar powered fan controlled by Monodraught’s PowerTrack™ system. The system consists
of an external louvre protected internally by a Trilayer Weather Protection and internally divided. The simple, but effective
design of the system provides fresh air during the daytime as well as providing night-time cooling.
A fan served by a central core provides intake or extract air (intake as standard), powered by solar panels situated at within the
system capping. The fan is designed to provide the additional ventilation when it is need most, during summer, but with zero
running cost. In order to maximise the performance of the solar powered fan, the system utilises the PowerTrack™ control
system, which maximises the solar output to provide a smooth current from the solar panels and optimised fan flow.
TECHNICAL DETAILS
•
MATERIAL:
»» 225 mm Dia 24 V axial fan.
»» 40 W Monocrystalline photovoltaic solar module
•
OPTIONS:
»» Intake fan arrangement. Extract fan arrangement.
»» Modified & extended skirt arrangements (to suit
specified roof pitch and alternate upstand
arrangements, on request).
•
•
PERFORMANCE:
»» Fire – BS 476-3:2004 / BS 476-24:1987.
»» Sound - BS EN 20140-10:1992.
•
Page 57
GUARANTEE:
DIMENSIONS:
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
GENERAL DESCRIPTION
PRODUCT VARIANTS
Trunk Trunk
Width
Dim A
Dim B Dim C Dim D# Dim E# Dim F
95
706
339
460
150
278
600
125
906
395
600
150
278
800
155
1106
446
740
150
278
1000
185
1206
500
880
150
278
1200
225
1506
579
1090
150
278
1500
Dim G
49
74
155
157
214
Weight No. of
Louvres
kg
55
8
79
10
118
12
158
14
215
14
Louvre free
area / face
m2
0.140
0.252
0.396
0.572
0.896
WIRING DETAILS
•
»» Farnell: 1190286.
»» RS: 660-4096.
Reference: 16-2-4A.
»» CSA: 0.5 mm².
»»
»»
»»
»»
»»
»»
Screened: No.
• SOLA-BOOST CLASSIC
Monodraught provides a 10m long Cat 5E network cable, as
standard, for connecting to wall mounted controller. Should
additional length be required, these must be straight wired to TIA/
EIA-568-B RJ45 wiring standard (T-568B at both ends).
Page 58
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER systems
TRILAYER WEATHER PROTECTION (Square)
Monodraught’s TriLayer Weather Protection combines the use of the WINDCATCHER Classic’s external louvre bank, anti bird
mesh and Rain Trap Louvre feature with an internal fibre mesh to protect against extreme weather conditions and is supplied
as a standard but is also suitable for retro fit installation.
The system assists in preventing snow ingress into Monodraught’s WINDCATCHER Classic systems by averting it before it
reaches the trunk of the system and channelling it back down the Rain Trap louvre. The TriLayer Weather Protection system
has been proven to be effective against simulated fine particle blizzard conditions.
TECHNICAL DETAILS
•
MATERIAL:
»» Fibre Glass with PVC Coating with a fine mesh.
»» Charcoal colour.
»» 27 mm x 12 mm Aluminium frames with rubber spline.
•
OPTIONS:
»» Frames can have a maximum width of 1000 mm.
Please note some systems may have an internal support
frame that may require the frame to be split into two smaller
frames. Widths of over 1000 mm will also require the frame
to be split into two.
»» Frames can have a maximum height of 2400 mm. Heights
of over 2400 mm will require the frame to be split into two.
•
GUARANTEE:
»» 10 year warranty.
•
PERFORMANCE:
»» Free Area of 66 %.
Securing Rivot
Detail A
Anti Bird Mesh
Louvre
Mesh Frame
Rain Trap Louvre
Page 59
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
TRILAYER WEATHER PROTECTION
GENERAL DESCRIPTION
COOL-PHASE®
Natural Cooling Systems
Page 60
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Low Energy Cooling and Ventilation Unit
COOL-PHASE
GENERAL DESCRIPTION
COOL-PHASE uses a thermal energy store utilising a Phase Change Material (PCM) in combination with an intelligently
controlled Air Handling Unit to actively ventilate and cool the building. The COOL-PHASE system can maintain temperatures
within the comfort zone, while radically reducing energy consumption by up to 90%, compared to a conventional cooling
system. Unlike conventional cooling approaches, COOL-PHASE uses no refrigerants making it an environmentally sound
solution to cooling our buildings.
TECHNICAL DETAILS
•
MATERIAL:
»» Steel rectangular section frame (ALLOY STEEL ERW BS6323).
»» Aluminium folded sheet (EN AW5251 H22).
»» Thermal moulded plastic.
»» Phenolic foam insulation board (CFC/HCFC – free and ODP).
•
PERFORMANCE:
»» Normal ventilation rate of approximately 0.1 to 0.28 m³/s.
»» Maximum ventilation rate of approximately 0.35 m³/s.
»» Thermal energy storage: 8 kWh.
•
OPTIONS:
»» Fascia version for suspension below ceiling or false ceiling
version supplied with fittings for installation in ceiling void.
»» Powder coated white, alternative colours available on request.
•
DIMENSIONS:
»» 4000 x 800 x 400 mm (for suspended system with fascias).
»» System dimensions vary for installation above false ceiling.
»» Minimum ceiling void (if mounting within void): 500 mm.
»» Weight: 375 kg.
•
SYSTEM REQUIREMENTS:
»» Connection to clean outside air source, inlet to be positioned
away from sources of pollution / heating.
»» Inlet: A suitable roof cowl or minimum 500 x 500 mm weather
proof louvre with bird guard.
»» Filtration: G4 300 x 400 x 500 mm bag filter, filter box & access hatch.
»» Minimum supply duct size: 400 x 300 mm.
»» Exhaust: internal or external grille specified to suit.
Page 61
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
COOL-PHASE
COOL-PHASE® is a low energy cooling and ventilation system that creates a comfortable, fresh and healthy indoor
environment and reduces the running costs of buildings.
Specific Fan Power & Fan Curve
Ventilation and specific fan power calculated for air passing through heat exchanger, direct ventilation rates will be
higher and therefore correspond with improved specific fan power ratings.
500
Ventilation
rate [m3/h]
Fan power
[W]
SFP
[W/l/s]
320
1152
87
0.27
286
1030
72
0.25
250
900
58
0.23
227
817
46
0.20
200
720
35
0.18
170
612
26
0.15
125
450
19
0.15
Fan Speed 26%
450
Fan Speed 30%
Fan Speed 34%
400
Fan Speed 38%
350
Pressure [PA]
Ventilation
rate [l/s]
Fan Speed 42%
Fan Speed 46%
300
Fan Speed 50%
Fan Speed 60%
250
Fan Speed 80%
200
Fan Speed 100%
150
100
50
0
50
100
150
200
250
300
350
400
450
500
Flow [l/s]
System: 6 m duct run, 90° bend, 2 x PCM modules, 300 x 400 mm G4 bag
filter, 450 x 450 mm weather louvre.
Sound power levels for the Cool-Phase AHU with fascia and in normal operating mode for different fan speeds.
Sound Power Levels of the AHU with fascias
Frequency
(Hz)
63
125
250
500
1000
2000
4000
8000
Fan speeds
26%
53.3
49.7
52.9
46.4
41.0
30.8
21.4
23.2
34%
57.5
57.8
57.0
53.6
46.9
42.2
30.1
24.2
42%
53.5
68.2
62.0
57.0
53.3
48.6
38.6
27.1
Page 62
50%
56.0
79.3
66.3
62.8
59.0
53.3
46.7
34.9
60%
60.3
83.4
72.9
69.4
63.6
58.7
54.0
42.8
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
CONTROLS AND USER INTERFACE
•
•
•
•
•
•
•
Wall mounted user controls with room temperature, humidity and CO2 sensors.
COOL-PHASE control system including temperature and humidity sensors.
Master / slave mode to control multiple units in a single zone.
Optional connections to compatible window, natural ventilation (eg. WINDCATCHER® natural ventilation system) or heating systems.
Optional ‘traffic light’ indicator for windows.
Inhibit input to enable / disable COOL‑PHASE system from BMS or Fire Alarm circuit.
Single digital on / off output to be used in one of the following modes:
»» Heating: The COOL-PHASE system will signal to the BMS to turn on heating when temperatures fall below a preset level.
»» Cooling: The COOL-PHASE system will signal to the BMS to turn on a secondary cooling system when temperatures rise above a preset level.
»» The COOL-PHASE system will signal to the BMS when there is a fault in the system.
WIRING REQUIREMENTS
•
•
•
•
Single phase mains with switched 5A fuse spur supply.
KLIK PCR2000 socket, positioned within 1 m from AHU footprint.
CAT 5E network cable between unit and user interface.
CAT 5E network cable between slave and master units (as required).
PCM Heat Exchanger
External Air
Direct Ventilation
Re-circulated Air
Page 63
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
PRODUCT VARIANTS
COOL-PHASE Unit about False Ceiling
Air Handling Unit (AHU)
Thermal Battery Module
Ceiling Tile Diffusers
Page 64
Recirculation Grille
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
COOL-PHASE Unit with Fascias
Duct
Diffuser
Air Handling Unit (AHU)
Thermal Battery Module
Page 65
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Others
HEAT HARVESTER 5/25, 8/35, 12/75
Sizes available: 5/25, 8/35, 12/75
Heat Harvester systems are a revolutionary de-stratification fan as they thermally equalize the air temperature in an enclosed
space. The significance of this is that the system prevents all the hot air in the space rising to the ceiling and all the cold air
sinking to the most important area, ie. the floor. The Heat Harvester system can also be used in a cooled air conditioned
environment to equalize the temperature. The Heat Harvester system is suitable for any buildings, and can suit ceiling heights
ranging from 2.5–31 m. The system is available as a free hanging unit.
TECHNICAL DETAILS
•
MATERIAL:
»» Outer shell recyclable Polycarbonate/ABS plastic resin.
»» Inner Stator recyclable ABS.
»» All materials Fire Rated 5VA materials.
•
PERFORMANCE 5/25:
»» Volume Flow Rate of 126 l/s.
»» Can achieve less than a 1°C temperature differential
between floor and ceiling.
»» Costs less than 10p a day to run 240 V AC with 25 W
power consumption.
•
PERFORMANCE 8/35:
power consumption.
•
PERFORMANCE 12/75:
power consumption.
•
DIMENSIONS 5/25:
»» Maximum height is 560 mm.
»» Maximum Dia is 330 mm.
»» Weight 5.4 kg.
»» Free hanging units to be installed 300mm – 600mm
below ceiling level.
Page 66
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
HEAT HARVESTER
GENERAL DESCRIPTION
•
DIMENSIONS 8/35:
»» Weight 5.4 kg.
»» Free hanging units to be installed 300mm – 600mm below ceiling level.
•
DIMENSIONS 12/75:
»» Weight 6.4 kg.
»» Free hanging units to be installed 300mm – 600mm below ceiling level.
ELECTRICAL DATA
Model
Volts
Hertz
Watts
RPM
CFM
5/25
8/35
12/75
230
230
230
50
50
50
25
35
75
1230
1650
-
405
1072
-
Page 67
Flow
Rate l/s
125
150
238
dB(A)
30
34
40
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
CONTROL SYSTEMS
Page 68
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
CONTROL systems
iNVent (IN0031)
GENERAL DESCRIPTION
TECHNICAL DETAILS
•
MATERIAL:
»» Front Cover: Acrylic capped ABS.
•
OPERATING CONDITIONS:
»» 0 - 40 oC.
»» 10 – 80 % RH non-condensing.
•
MOUNTING:
»» Unit is designed to be wall mounted in a
decentralised location within the building close to the
zones it is controlling like a storage cupboard or above
a suspended ceiling.
•
POWER SUPPLY:
»» 24V DC @ 70 mA Nom.
»» Supplied with SMPS for converting 240V AC to
24V DC @ 2.5A requiring connection to a 3/5A
switched spur. (The three components supplied are:
IN0032 PSU, IN0033 IEC Plug cable and IN0034
PSU cover for wall mounting.)
»» The iNVent can supply up to a total of 2A from the
24VDC supply to field devices.
•
DIMENSIONS:
»» 255 x 385 x 40 mm.
•
TERMINALS:
»» Cable size 1 mm2 max.
»» Cable size 0.5 mm2 multi-strand recommended.
Page 69
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
iNVent (IN0031)
The iNVent X-AIR is the latest version of the Monodraught ICS4 for natural ventilation control.
The primary function of this system is to control up to four zones each consisting of up to three WINDCATCHER® natural
ventilation systems, or up to three SOLA-BOOST® solar assisted natural ventilation systems, both in either Classic or X-AIR
guises when utilised with the appropriate field sensing and control components. The system can also be used to control zones
of SUNCATCHER® natural ventilation and daylight systems and VENTSAIR facade and roof mounted ventilation terminals.
DIGITAL INPUTS
INPUT
Rain
TYPE
(volt free contact closure detection)
Heat
Fire
Competition Switch Open
Competition Switch Close
USED WITH
Rain Sensor Kit. (IN0043, IN004 and
IN0040).
BMS input (VF-NO Contact).
BMS/Fire Alarm input (VF-NO Contact).
Monodraught Competition Switch IN0046
or BMS input (VF-NO contact).
Monodraught Competition Switch IN0046
or BMS input (VF-NO contact).
ANALOGUE INPUTS
INPUT
Zone 1 Controller
Zone 2 Controller
Zone 3 Controller
Zone 4 Controller
External Temperature
TYPE
0-10V DC
0-10V DC
0-10V DC
0-10V DC
0-10V DC
Zone 1 Active Louvre Feedback
0-10V DC
0-10V DC
0-10V DC
0-10V DC
USED WITH
N0001 WINDCATCHER Temperature Controller, IN0002
WINDCATCHER Temperature and CO2 controller or IN0003
SOLA-BOOST Temperature Controller/IN0004 SOLA-BOOST
Temperature and CO2 Controller with one of the following
Powertracks: IN0020 Standard, IN0021 Master, IN0060 Standard
X-AIR or IN0061 Master X-AIR. IN0048 External Temperature
Sensor. Supplied as Standard.
Connected to Master Active Louvre Drive Motor via
WINDCATCHER X-AIR Damper Cable or SOLA-BOOST X-AIR
Powertrack Cable.
ANALOGUE OUTPUTS
OUTPUT
Zone 1 Damper
Zone 2 Damper
Zone 3 Damper
Zone 4 Damper
Zone 1 Active Louvre
TYPE
2-10V
2-10V
2-10V
2-10V
2-10V
2-10V
2-10V
2-10V
USED WITH
WINDCATCHER / WINDCATCHER X-AIR or one of the
following Powertracks: IN0020 Standard, IN0021 Master, IN0060
Standard X-AIR or IN0061 Master X-AIR.
Connected to WINDCATCHER X-AIR Zone with Damper or to
SOLA-BOOST X-AIR Powertrack with Damper, Controller and
Feedback.
Page 70
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
DIMENSIONAL DRAWING
Monodraught Limited reserves the right to change the product specification or withdraw the product without prior notification.
Page 71
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
CONTROL systems
WINDCATCHER CONTROLLER (IN0001 and IN0002)
The WINDCATCHER controller is designed to be mounted in a zone containing natural ventilation products with
controllable dampers, like WINDCATCHER X-AIR among others.
The product provides temperature local override control along with temperature sensing and even CO2 measurement on the
IN0002 variant all encoded onto a single 0-10V analogue output.
Overrides are timed and configurable at time of commissioning to 20 minutes, 1 hour or 3 hours.
The CO2 senor in the IN0002 version features an Automatic Background Calibration which will recalibrate the sensor back to a
background level during unoccupied periods to cancel sensor drift and maintain accuracy over the typical product lifespan.
This unit is particularly suitable for applications requiring demand controlled ventilation and is recommended for use
Monodraught iNVent Systems or third party BMS systems.
TECHNICAL DETAILS
•
MATERIAL:
»» Enclosure moulded in flame retardant PC/ABS.
•
»» 10 - 40 oC.
»» 10 – 80% RH non-condensing.
•
MOUNTING:
»» To be wall mounted 1.2 - 2.1 m from floor, out of direct sunlight.
•
POWER SUPPLY:
»» 24V DC @ 15mA Nom.
•
DIMENSIONS:
»» 100 x 150 x 40 mm.
•
TERMINALS:
Page 72
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
WINDCATCHER CONTROLLER
GENERAL DESCRIPTION
OUTPUTS (in order of priority on single output)
OUTPUT
Temperature
CO2*
Override Open
Override Close
VOLTAGE RANGE
0 - 10V
8.6 - 9.2V
9.2 - 10V
0 - 0.5V
MEASURED RANGE
10 - 29 oC
Threshold breached**
Timed button
Timed button
ACCURACY
+/ -1 oC
+/-100 ppm
N/A
N/A
DIMENSIONAL DRAWING
Page 73
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
CONTROL systems
SOLA-BOOST CONTROLLER (IN0003 and IN0004)
The SOLA-BOOST Controller is designed to be mounted in a zone containing Monodraught SOLA-BOOST systems and
needs to be used with the correct Powertrack unit for the systems, one of: IN0020 Standard, IN0021 Master, IN0060
Standard X-AIR or IN0061 Master X-AIR.
The product provides temperature local override control along with temperature sensing and even CO2 measurement
on the IN0004 variant all communicated over the bespoke RS-485 Communications to the Powertrack and then encoded
onto a single 0-10V analogue output.
Overrides are timed and configurable at time of commissioning to 20 minutes, 1 hour or 3 hours.
The CO2 senor in the IN0004 version features an Automatic Background Calibration which will recalibrate the sensor
back to a background level during unoccupied periods to cancel sensor drift and maintain accuracy over the typical
product lifespan.
This unit is particularly suitable for applications requiring demand controlled ventilation and is recommended for use
Monodraught iNVent Systems or third party BMS systems.
TECHNICAL DETAILS
•
MATERIAL:
»» Enclosure moulded in flame retardant PC/ABS.
•
»» 10 - 40 oC.
»» 10 – 80% RH non-condensing.
•
MOUNTING:
»» To be wall mounted 1.2 - 2.1 m from floor, out of direct sunlight.
•
POWER SUPPLY:
»» 24V DC @ 15mA Nom. (Supplied from Powertrack down CAT5e).
•
DIMENSIONS:
»» 100 x 150 x 40 mm.
•
TERMINALS:
»» RJ45 Socket for Straight wired CAT5e Patch lead to the Powertrack unit.
Page 74
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
SOLA-BOOST CONTROLLER
GENERAL DESCRIPTION
OUTPUTS
OUTPUT
Temperature
CO2*
Override Open
Override Close
VOLTAGE RANGE
0 - 10V
8.6 - 9.2V
9.2 - 10V
0 - 0.5V
MEASURED RANGE
10 - 29 oC
Threshold breached**
Timed button
Timed button
ACCURACY+
+/ -1 oC
+/-100 ppm
N/A
N/A
DIMENSIONAL DRAWING
Page 75
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
CONTROL systems
RAIN SENSOR KIT (IN0043, IN0042, IN0040)
The Rain Sensor Kit comprises of: IN0043 IP55 Din rail Enclosure for liquid detection module, IN0042 Liquid detection module
and IN0040 Rain Sensor. The kit provides detection of rain through a volt-free changeover relay output. The Rain Sensor
incorporates a heater to dry the sensor post sensing event and to prevent erroneous detection of mist etc.
This kit is suitable for most applications requiring precipitation detection and is recommended for use with Monodraught iNVent
control systems or third party BMS solutions.
TECHNICAL DETAILS
•
MATERIAL:
»» IN0043: Flame Retardant Polystyrene (Polycarbonate
Door).
»» IN0042 and IN0040: Enclosures are manufactured from
Flame Retardant Polycarbonate.
•
»» -10 to + 40 oC.
»» 10 – 80% RH non-condensing (IN0040 0 – 100% RH with
IP65 gland).
•
MOUNTING:
»» Liquid detection module (IN0042) to be mounted inside the
building and within the supplied enclosure (IN0043).
»» Rain Sensor (IN0040) to be mounted on the roof with the
sensing element facing upwards, clear of any obstructions
like pier walls or higher buildings in all directions for at
least 20 m.
•
DIMENSIONS:
»» IN0043: 100 x 150 x 96 mm.
»» IN0042: 90 x 55 x 58 mm.
»» IN0040: 75 x 60 x 36 mm.
•
TERMINALS:
»» 240V cables to be sized to suit spur rating.
»» Cable size 0.5 mm2 multi-strand recommended for all
low voltage.
•
PROTECTION:
»» IN0043: IP55; IN0042: IP20; IN0040: IP65.
•
POWER SUPPLY:
»» IN0042: 240V AC +/- 15% @ 40 mA Max.
Page 76
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
RAIN SENSOR KIT
GENERAL DESCRIPTION
OUTPUT (FROM IN0042)
OUTPUT
Rain
RELAY TYPE
Changeover
(NO mode commonly
utilised.)
DELAY TO ACTIVE
6 Seconds
RELAY RAITING
240V 3A Max.
(Low Voltage Digital Input
Preferred.)
CONNECTION DRAWING
Rain Sensor
Liquid Detection
Module
To Control System
(Digital Input / Contact
Closure Detection)
240 V Switched
Fused Spur
Page 77
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
CONTROL systems
ROOM TEMPERATURE SENSOR (IN0045)
The IN0045 is a room temperature measurement device with a range of 0 – 40 oC.
This unit is suitable for most applications requiring temperature controlled ventilation and is recommended for use with
Monodraught iNVent control systems, third party BMS or Monodraught custom control systems such as our BACnet/IP
solutions.
TECHNICAL DETAILS
•
MATERIAL:
»» Enclosure is manufactured from Flame Retardant Polycarbonate.
•
»» 0 - 40 oC.
»» 10 – 80% RH (Non-Condensing).
•
MOUNTING:
»» To be wall mounted 1.2 - 2.1 m from floor out of direct sunlight
(1.5m recommended).
•
POWER SUPPLY:
»» 24V DC @ 20mA Nom.
•
DIMENSIONS:
»» 80 x 80 x 29 mm.
•
TERMINALS:
Page 80
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
ROOM TEMPERATURE SENSOR
GENERAL DESCRIPTION
DIMENSIONAL DRAWING AND CONNECTIONS
Page 81
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
CONTROL systems
EXTERNAL TEMPERATURE SENSOR (IN0048)
The external temperature measurement device with a range of -10 to + 40 oC, has an IP65 rating and the sensor is
encapsulated within this enclosure to reduce the risk of damage from high humidity or condensing conditions.
This unit is suitable for most applications requiring ventilation control linked to external temperature and is recommended for
use with Monodraught iNVent control systems or third party BMS solutions.
TECHNICAL DETAILS
•
MATERIAL:
»» Enclosure is manufactured from Flame Retardant
Polycarbonate.
•
»» -50 to + 70 oC.
»» 0 – 100% RH (When used with IP65 gland).
•
MOUNTING:
»» To be fixed to a north facing wall free from the
effects of direct sunlight or shaded by a soffit or similar.
•
POWER SUPPLY:
»» 24V DC @ 20mA Nom.
•
DIMENSIONS:
»» 75 * 60 * 36 mm.
•
TERMINALS:
Page 82
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
EXTERNAL TEMPERATURE SENSOR
GENERAL DESCRIPTION
OUTPUTS (in order of priority on single output)
OUTPUT
Temperature
VOLTAGE RANGE
0 - 10V
MEASURED RANGE
-10 to + 40 oC
ACCURACY
+/- 0.5 oC
DIMENSIONAL DRAWING
Page 83
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
BUILDING SIMULATION
Daylight Simulation & Thermal Modelling
Page 84
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Building Simulation
DAYLIGHT SIMULATION
Monodraught have a range of daylight design tools available to simulate the anticipated conditions experienced within a
given building as a result of the installation of our natural daylight systems.
IES VE-PRO
There are two daylight simulation packages available in the VE-Pro suite that are used as design tools by
Monodraught’s Design Engineers – FlucsDL and RadianceIES.
•
FLUCSDL:
The FlucsDL module enables the designer to determine
the indoor daylight conditions in different rooms within a
building model to ascertain the daylight factors and light
levels experienced within a space. Monodraught have
experimentally determined the design parameters
associated with our natural daylight systems, herefore
our Design Engineers have the ability to model physical
representations of our systems and the subsequent
daylight conditions achieved in the areas that they are
intended to be installed within.
•
RADIANCE IES:
The RadianceIES module enables our Design Engineers
to analyse the daylight levels in a room that has
Monodraught natural daylight systems installed within it.
The programme provides the user with the capability to
produce photo-realistic renders of the internal spaces,
which can also be used to ascertain the exact light levels
within a room. The module can also link with the thermal
simulation modules of the VE-Pro suite, using daylight
dimming profiles for lighting gains to enhance the thermal
comfort for occupants.
DIALUX
The package is renowned for its accuracy in modelling daylight
and the visualizations that can be produced give the client an
insight into the quality of light that can be achieved within a
space by Monodraught natural daylight systems.
Page 85
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
DAYLIGHT SIMULATION
GENERAL DESCRIPTION
LUX PLOTTER
The LUX plotter is a mathematical model developed for Monodraught
by the University of Liverpool for determining the size and number of
Monodraught SUNPIPE® natural daylight systems required to achieve
a desired lux level in a given space.
Page 86
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
Building Simulation
THERMAL MODELLING
Monodraught have a range of thermal modelling tools available to simulate the anticipated thermal conditions
experienced as a result of the installation of our natural ventilation and low energy cooling and ventilation systems
within a given building.
•
Dynamic Thermal Simulation:
A dynamic thermal simulation encompasses all the design parameters that influence the way in which a building responds to the external environment. Users can create a model that replicates the exact physical form of a building, incorporating all aspects of the construction specification and the internal heat gains to simulate the anticipated internal conditions in accordance with industry recognised external weather data. There are three dynamic simulation packages currently used by Monodraught for the thermal modelling of buildings:
IES VE-PRO
Integrated Environmental Solutions (IES) are the global leaders in the field of building performance simulation and
their package, the IES <Virtual Environment>, is widely recognised within the industry for its ability to enhance the
sustainable building design process.
VE-Pro is the most powerful suite of building performance analysis tools available, and it is therefore the primary design
tool used by all of Monodraught’s Design Engineers. The ApacheSim thermal simulation engine, supported by the
Suncast and Macroflo modules, complies with the requirements of CIBSE Application Manual AM11, and the software is
recognised as one of the most accurate means of modelling natural ventilation strategies using bulk air flow simulation.
•
Natural Ventilation Design Consultancy:
Monodraught offer a complete design service for our natural
ventilation systems. If the necessary information to compile
a thermal model is made available, our Design Engineers will
construct a complete dynamic thermal model of a building for
a specific project in order to ascertain the size and number of
systems required for a particular natural ventilation or low
energy cooling and ventilation strategy. This service is provided
free of charge, and we issue detailed proposal documents that
outline the input design parameters used for the model and the
resultant compliance with the associated thermal comfort
criterion for our proposed strategy.
Alternatively, our design engineers also have the ability to
simulate our systems using IES models that have been provided
by an external party. The advantage of this approach is that the
client can pre-define the input parameters in their model, thus
ensuring that our Design Engineers are using thermal and
construction templates that accurately reflect the building fabric
and its internal environment.
Page 87
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
THERMAL MODELLING
GENERAL DESCRIPTION
•
IES Performance Components:
To help architects and consultants deliver low maintenance, energy efficient designs within the built environment, Monodraught have collaborated with IES to develop Performance Components – a revolutionary way of modelling natural ventilation systems using the Virtual Environment Suite.
Conventional modelling of wind tower systems involves constructing a 3D representation of the WINDCATCHER within a specific model and assigning each face with a performance factor which quantifies its ability to ‘catch’ the air. This process is, however, often misinterpreted by external parties who wish to simulate wind tower systems due to variations between software packages and the manufacturers of such systems being unable to provide the required input data for a particular model. Only now, with the launch of performance components, will there be a defined method for modelling wind tower natural ventilation systems that will soon come to be recognised across the building design industry.
The VE-Pro suite now features a library of predefined 3D component
representations of our systems that can be dragged easily from a
catalogue of products onto a building model constructed within the virtual
environment. The performance and energy savings can then be assessed
in an open and transparent process by the client alone, thus building
confidence in the application of WINDCATCHER natural ventilation systems
and demonstrating the true capabilities and potential for natural and hybrid
ventilation schemes. Each performance component replicates the shape,
texture and colour of the associated WINDCATCHER system, with the
performance characteristics and control strategies predefined to optimise
the usability and efficiency of the tool.
Users will find the simplicity of the ‘drag and drop’ feature rapidly
decreases the modelling time typically associated with these types of
systems. With each performance component already assigned the relevant
construction templates, thermal templates, and flow profiles, they are ready
to simulate as soon as they have been positioned in the model, allowing
users the flexibility to explore the possibilities of natural ventilation as an
alternative to a more conventional mechanical system. The analysis tools
that are available in the VE-Pro suite provide the user with a visual insight
into the performance of WINDCATCHER systems year round, and the
authentic textures offer architects and designers a means of understanding
the aesthetics of Monodraught systems and how best to integrate them
into a building.
Page 88
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465
NAVENSYS
The NAVENSYS thermal simulation software was developed by Monodraught to
model natural ventilation strategies within buildings. The software has been built
upon Monodraught’s forty years experience in manufacturing natural ventilation
systems and 4 years of academic research by Brunel University.
The NAVENSYS program is a simplified dynamic thermal simulation engine,
requiring fewer inputs than the likes of an IES or a Tas model. This means it is a
useful tool for sizing Monodraught natural ventilation and low energy cooling and
ventilation systems during the early stages of a project, when full details of a
building are not always readily available.The by NAVENSYS simulation software
has been collaborated against performance data from the Tas thermal modeling
software.
Page 89
Monodraught Ltd
T: +44 (0) 1494 897700 F: +44 (0) 1494 532465

Monodraught Data Cards

Transcription

Similar documents

whitewater rafting six flags water country rock climbing canobie lake

press kit - New Music Promote

PDF Brochure - Lewis Ellis

How to use TumbleBooks - Halifax Public Libraries

3 3 g Total Net Floor Area For Lease By Vietnam

city centre atlantic 5523 spring garden road, halifax, ns

AVS24 2.4 GHZ Wireless Audio/Video Sender

Cobblers Bank Hill Road North, Helsby, Cheshire, WA6

Vicky persuades film star Kebbell to star in short

47 Farrar Lane Leeds, LS16 6BJ £369950 Asking Price