RSC® technology

Transcription

RSC® technology

TECNOALARM
INTERNATIONAL
LEADER OF
SECURITY
An Italian story
Tecnoalarm, with more than thirty-five
years of experience in the security sector,
is synonymous of an unceasing research
and technological innovation.
Today, the company from Turin, which has
achieved a position of absolute excellence
in Italy and in Europe, is rapidly conquering
markets worldwide.
This not only thanks to the technological
know-how, the sophisticated inspection
techniques and the ability to always
propose advanced solutions and high
quality products, but also to the great
attention that the company pays to the
market trends and to the voices of qualified
operators in the sector.
2
Architects, planners and interior
designers can find in Tecnoalarm the
ideal partner for the design, installation
and management, even customized, of
integrated solutions aimed at protecting
locations such as dwellings, buildings,
commercial and industrial areas,
airports, highly sensitive locations and
large retail complexes and centers.
The technological innovation and design,
strictly “made in Italy”, are enriched
by that “touch of genius” which is the
unique characteristic of Italian style.
Tecnoalarm is proud to spread this
culture, these values and this knowledge
around the world.
3
Advanced security solutions
The Tecnoalarm research department has
developed an extensive range of detectors
for the three levels of intrusion protection:
perimeter protections of the estate,
those for the outdoor and the indoor
of the building.
The perimeter protection is made with
long-range barriers, which have been
specifically developed for outdoor
installations like industrial sites, warehouses,
courtyards or gardens. Barriers and
detectors protect the outside of the building
and the access ways like doors and windows.
The indoor detectors capture the presence
of intruders in each specific area of the
building as well as sabotage attempts
thanks to innovative anti-tamper protections
like the antimasking control.
The Tecnoalarm systems can be integrated
with wireless components for an easy
installation in inaccessible places.
All the wireless devices are equipped
with dual-band technology to ensure
a good quality of transmission and reception
of the wireless signals. The user interface
is friendly with control units which also
integrate interactive voice functions.
RSC® technology
(Remote Sensitivity Control)
The RSC® technology is an innovative
remote communication system between
the alarm system and the Tecnoalarm
software operated in the installer’s office.
The sophisticated technology developed
by the Tecnoalarm research department
checks functioning of each device and
prevents possible failures.
4
RDV® technology
Another showpiece of Tecnoalarm
is the RDV® technology (protected by
international patent). It allows the final user
to verify in real time if the alarm has been
caused by an intrusion.
The digital alarm signal is transformed into
a particular sound signal whose intensity
is directly proportional to the detected
movement.
This signal is sent to the user’s mobile phone
or the central monitoring station for the
necessary action.
The security professionals
It is only thanks to an appropriate project
and a correct installation, that you make
full use of a Tecnoalarm security systems.
For this reason, the systems are installed
by professionals who are ble to carry out a
correct risk analysis and who have a wide
experience and technical knowledge acquired
by attending training courses on a regular
basis. Tecnoalarm professionals propose
solutions which guarantee the highest level
of protection for your home with both passive
and electronic protections, and which comply
with the current norms. Concerning this issue,
Tecnoalarm has published the Guide to the
European Norms for Burglar Alarm Systems
with the purpose to explain in a simple and
comprehensive way the national and European
regulatory framework.
Burglar alarm systems
Guide to the European Norms
Published by
5
Training
Tecnoalarm introduces the concept of Security professional,
by offering on a regular basis, free training courses for
companies specialized in the installation of security system.
Only after a practical/theoretical training conducted by
a technician from Tecnoalarm, the customer obtains the
permission to use the RSC® systems. The constant training
increases the professional level of the companies and offers
them new opportunities for business development and growth.
The Tecnoalarm RSC® technology
The Tecnoalarm RSC® technology is an innovative
management platform which guarantees
the continuity and reliability of the service,
ensures an efficient use of the system’s resources
and provides analysis and monitoring tools for
preventive maintenance of the systems.
The need for constant innovation requires that we,
as a manufacturer, on the one hand produce
increasingly sophisticated devices but on the other hand
propose refresher courses to enhance the knowledge of
the installers and users in terms of security technology.
Tecnoalarm periodically organizes training courses
on the RSC® products, with particular attention to
the complex regulatory framework. The courses are
addressed to professionals involved in the design,
installation and maintenance of the security systems.
Advanced programming
The advanced programming level, based on a software
tool, is an expansion of the control panel’s programming
facilities. It permits a large extent of customization
thanks to an absolutely free programming of the system’s
resources. The functions of the inputs, outputs, remote
controls and telephone channels can be redefined by
programming operations which associate actions to
specific events. The advanced programming level allows
the installer to meet the most demanding requirements
of the customers, overcome the limits of a traditional
burglar alarm system and integrate home automation
applications. The course for the obtainment of the
qualification and the license for the first and second
advanced programming level is an integral part of the
training program that Tecnoalarm offers to its customers.
6
NORMS FOR
BUILDING OF BURGLAR
ALARM SYSTEMS
INDEX
INDEX
Systems
p. 10
Consoles and control units
p. 60
Expansion modules
p. 68
RSC® technology
p. 72
Wireless
p. 92
Detectors
p. 98
Sirens
p. 108
Telephone communicators
p. 112
Power supplies
p. 116
Videoalarm
p. 120
Software
p. 126
App
p. 132
Accessories
p. 134
Merchandising
p. 142
Iconography
p. 147
General sales terms
p. 150
7
Index
Systems
p. 10
RSC® technology
p. 72
TP4-20
p. 12
Input expansion modules
p. 75
TP8-28
p. 20
Dual technology for indoor use
p. 76
TP8-88
p. 28
Passive infrared for outdoor use
p. 78
TP8-96 VIDEO
p. 36
Active infrared for outdoor use
p. 80
TP16-256
p. 44
Microwave for outdoor use
p. 86
TP16-512
p. 52
Bus sirens
p. 88
Bus sirens for indoor use
p. 89
Bus sirens for outdoor use
p. 90
Consoles
p. 62
Transponder readers
p. 64
Transponders
p. 64
Transmitter-Receivers
p. 94
Key points and interfaces
p. 65
Receivers
p. 94
Keypads
p. 65
Control units
p. 94
APR - Access Point Readers
p. 66
Transmitters
p. 95
RFID cards
p. 66
Passive infrared for indoor use
p. 95
FINGER KEY - Relay board
p. 67
p. 96
p. 97
Siren for outdoor use
p. 97
Expansion modules
8
p. 60
p. 68
p. 70
Output expansion modules
p. 71
Serial line extension modules
p. 71
Wireless
Detectors
p. 92
p. 98
p. 100
p. 101
p. 103
p. 104
p. 106
Sirens
p. 108
Accessories
p. 134
Sirens for indoor use
p. 110
Batteries
p. 136
Sirens for outdoor use
p. 111
Flame retardant cables CEI 20-22
p. 137
Cables - Class 2
p. 137
p. 112
Cables - Class 4
p. 138
p. 114
Twisted cables - Class 2
p. 138
Twisted cables - Class 4
p. 138
p. 116
Halogen free cables - Class 2
p. 138
Supply units
p. 118
Relay boards
p. 138
Power supplies
p. 119
High security reed contacts
p. 139
Reed contacts
p. 139
p. 120
Rod and rope mechanical contacts
p. 140
Video console
p. 122
Flooding detectors
p. 140
Standard console
p. 122
Inertial and glass break sensors
p. 141
IP cameras
p. 123
Hold-up detectors
p. 141
Fixed focus optics
p. 124
Optical repeaters
p. 141
Multi focus optics
p. 124
Junction box IP54
p. 141
Video servers
p. 125
Power supplies
Videoalarm
Merchandising
p. 142
p. 126
Demonstration cases
p. 144
Local/remote programming
p. 128
Display equipment
p. 145
Tecnomodem remote management
p. 128
Apparel
p. 146
TCP/IP remote management
p. 129
System accessories
p. 146
Monitoring
p. 129
License options
p. 130
Services
p. 130
Software
App
Iconography
p. 147
General sales terms
p. 150
p. 132
9
SYSTEMS
SYSTEMS
Continuous evolution, application of revolutionary technologies such as
RDV® and RSC®, attention to the industry standards, modularity, scalability,
programming and management based on a single programming environment
that uses the same tools and requires the same skills, make the Tecnoalarm systems
capable of always guaranteeing the highest standards of protection and security.
Technical features
To depict and outline the rapid technological progress of the Tecnoalarm systems
and to allow easy comparison between them, based on the intrinsic value and not on
the economic value, Tecnoalarm introduces the technical features index.
The index represents the distinctive features of the Tecnoalarm systems through
three topics:
- The management of notification carriers by the system
- The provision or integration of the Sensor Bus
- The provision or integration of the Siren Bus
The evaluation of each category is expressed with a letter (A, B or C), the set of
evaluations of the three categories expresses the technical features of the system.
The table shows how the technical development of new Tecnoalarm systems converges
toward a development more and more compliant with industry regulations that require
increasingly sophisticated and demanding checks and notifications.
The letters A, B, C respectively represent the levels excellent, good, satisfactory.
Technical
features
COMMUNICATION
VECTORS
RSC®
MANAGEMENT
SENSOR BUS
RSC®
MANAGEMENT
SIREN BUS
PSTN • GSM • TCP/IP
Not managed
Not managed
GSM • TCP/IP
Not managed
Not managed
Control panel’s equipment
GSM-GPRS • TCP/IP
PSTN • GSM-GPRS • TCP/IP
TP8-96 VIDEO
GSM-GPRS • TCP/IP
System integration
TP16-256
System integration
System integration
TP16-512
System integration
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
A: excellent - B: good - C: satisfactory
10
Help your customer in the choice of the Tecnoalarm system that best suits his needs.
Request and consult with him the comparative guide "Burglar alarm systems"
11
TP4-20 TP4-20 GSM TP4-20 TP4-20 GSM TP4-20 TP4-20 GSM TP4-20 TP4-20 GSM
TP4-20 • TP4-20 GSM
Bus systems expandable from 4 to 20 zones.
Remotely programmable and manageable.
SYSTEMS - TP4-20 - TP4-20 GSM
TP4-20 • TP4-20 GSM
Inputs
CPU
ESP4-20
SPEED
8 STD
CONVENTIONAL*
4
8
ZONE BUS
No
4 of which 2
Zone Bus
SPEED
4
SPEED
8
SPEED
ALM8 PL
4
8
8
No
* The conventional inputs may be programmed as: NC normally closed - NO normally open
BIL end-of-line resistor - B24 double end-of-line resistor. You can program: time filter, pulse count and inertial.
TP4-20 TP4-20 GSM TP4-20 TP4-20 GSM
System Configuration
As an alternative to the console LCD020
As an alternative to console LCD012 - LED06
14
Label that indicates for each type how many devices can be connected
m
3m
9
D.
H. 285mm
L. 350mm
Only System TP4-20
15
TP4-20 • TP4-20 GSM
TP4-20
• Management of conventional wired and/or radio
zones
• Wired zones manageable: up to 16
• Radio zones manageable: up to 20
• 1 24h input for self-protection
• 4 zone inputs for conventional detectors
• 1 alarm output for internal siren
• 1 alarm output for external siren
• 2 programmable logic outputs
• 1 Serial Bus to connect system devices
• Telephony 8 communicators/transmission
channels, two contact numbers for channel
• Notification of system events on the basis of the
format carrier: voice, SMS, Ring, DTMF, FSK,
and Data
• Integrated PSTN carrier, optional GSM and/or
TCP/IP transmission carriers
• Voice synthesis system with integrated
vocabulary according to the models or optional,
issue of telephone voice alerts
• 4 operating programs
Standard components
Integrations
Control modes
Automatic managements
Interfaces
16
TTL
INTERFACE
•
•
•
•
•
•
•
2 remote controls
4 weekly timers
2 time ranges for access
20 access codes
16 keys
16 radio controls
Digital control of the radio coverage and
interferences
• System log storage capacity: 512 events
• Automatic battery test with programmable
release in case of failure
• Linear power supply 1.1A
N.B. The TP4-20 control panel without voice synthesis
software module is only sold in Italy.
TP4-20 GSM
As model TP4-20 but with integrated GSM
transmission carrier.
Systems TP4-20 • TP4-20 GSM - Technical and functional specifications
4
CPU wired zones
Zones
Outputs
Internal
expansions
System
features
Wired zones manageable
16
Radio areas manageable
20
Activator interface
TP PK
RS485 system bus
1
8+8 16 characters
Phone numbers
Phone queue items
16
Communication protocols
21
Wireless expansion modules
2
Console
8
Control devices
4
20
Dashboard modules - outputs
4
Keys
16
GSM communicator
(TP4-20 system only)
1
Radio controls
16
512
Event memory capacity
4
Access codes
Time ranges for access
2
Remote controls
2
Cyclic test
✓
Server cyclic test
✓
Communicators
8
Primary carrier
145mA @ 13.8V DC
130mA @ 13.8V DC
1.1A @ 14.8V DC
Power supply
12V/7Ah
Battery housing
ABS
Enclosure
PSTN
External GSM
Weight TP4-20 GSM
2.7kg
PROG NET2
Conformity
Directive
2.6kg
R&TTE 1999/05/EC
86
Phone numbers
8+8 16 characters
Phone queue items
16
TP4-20 GSM
Electrical
specifications
CPU TP4-20 power
requirement
CPU TP4-20 GSM power
requirement
350x285x93mm
Communicable events
TP4-20
230V AC +/- 10%
50Hz
Supply voltage
Dimensions (LxHxD)
Physical
specifications Weight TP4-20
Ethernet carrier (optional)
Technical
features
Serial bus
expansions
4
Secondary carrier (optional)
Telephone
section
TP4-20
79
Communicable events
1
Timers
Automation
PROG NET2
Wired zones expansion
modules
Programs
Programs
access
management
Telephone
section
TP4-20 GSM
ESP4-20
Input expansion
GSM
Primary carrier
3 + 2 programmable
CPU outputs
8
Communicators
20
Total logical zones
144
COMMUNICATION
VECTORS
RSC®
MANAGEMENT
SENSOR BUS
RSC®
MANAGEMENT
SIREN BUS
Not managed
Not managed
GSM • TCP/IP
Not managed
Not managed
17
TP4-20 • TP4-20 GSM
AVAILABLE MODELS
Name
Item no.
TP4-20
(Only in Italy)
TP-20/V
F101TP420/V-UK
✓
TP4-20 GSM
F101TP420G/V-UK
✓
✓
Optional
1.1A
✓
✓
Optional
1.1A
✓
Optional
1.1A
✓
✓
OPTIONAL SOFTWARE MODULES
Name
Item no.
VOCABOLARIO
F127TP420VOC
Software module that enables the operation of voice messages
Interfaces and internal expansions
ESP4-20
Compatibility
TP4-20
TP4-20 GSM
Mounting position
A
B
C
Expansion card with 4 parallel zone inputs. The inputs enable the wiring of conventional detectors
and Zone Bus (only the first 2 inputs).
Item no. F127TP420ESP
TP PK
Compatibility
TP4-20
TP4-20 GSM
Mounting position
A
B
C
Connection interface for proximity key readers; you can connect to the interface up to 4 readers
in parallel.
Item no. F127TP6PK
PROG NET2
Compatibility
TP4-20
TP4-20 GSM
Mounting position
A
B
C
Interface module for the connection of the control unit to the Ethernet network.
The module PROG NET2 allows to use the network as an IP communication carrier.
The interface allows to perform remote service and programming directly via the TCP/IP software.
Dimensions (LxHxD) 67x95x31mm. Grey.
Item no. F130PROGNET2
18
A
B
A
B
C
Mounting positions
C
TP4-20
TP4-20 GSM
SERIAL CONNECTION LINES
COMMUNICATION CARRIERS
SERIAL BUS
SENSOR BUS
SIREN BUS
PSTN
GSM
TCP/IP
TP4-20
Standard
component
-
-
Standard
component
Integrable on
serial bus
Integrable
internally
TP4-20 GSM
Standard
component
-
-
-
Standard
component
Integrable
internally
TP4-20 GSM - Accessories
GSM ANTENNA EXTENSION
4mt extension cable for antenna
connection to the GSM/GPRS phone
module.
Item no. C126PROLANTENNA
19
TP8-28 TP8-28 GSM TP8-28 TP8-28 GSM TP8-28 TP8-28 GSM TP8-28 TP8-28 GSM
TP8-28 • TP8-28 GSM
Bus systems expandable from 8 to 28 zones.
TP8-28 • TP8-28 GSM
Inputs
CPU
CONVENTIONAL*
2
ESP4-20
SPEED
8 STD
No
SENSOR BUS
6
SPEED
8
SPEED
ALM8 PL
SPEED
4 PLUS
SPEED
8 PLUS
SPEED
ALM8 PLUS
4
8
8
4
No
No
No
No
No
4
8
8
8
4
ZONE BUS
SPEED
4
No
No
No
TP8-28 TP8-28 GSM TP8-28 TP8-28 GSM
22
H. 285mm
L. 350mm
9
D.
3m
m
23
TP8-28 • TP8-28 GSM
TP8-28
• Remotely programmable and manageable
alarm centre composed of 8 zones expandable
up to 28 zones
• Management of wired zones (conventional or
serial) and/or radio zones (maximum 28)
• 6 inputs in Sensor Bus zone for serial detectors
• 1 Sensor Bus to connect bus detectors
• 1 Sensor Bus to connect bus sirens
and Data
• Speech synthesis (local and telephone) for the
issue of the voice alerts
• Integrated vocabulary, for the customization of
zone names, programs, and remote controls
• 8 remote controls
• 6 weekly timers
• 4 time ranges for access
• Customizable perpetual and/or biennial
calendar
Standard components
Integrations
Control modes
Interfaces
Advanced managements
24
TTL
INTERFACE
•
•
•
•
•
•
•
•
•
•
•
•
120 access codes,
100 RFID keys and/or cards
80 radio controls
Management of biometric readers of
fingerprints and RFID cards
Operating programs freely associable with the
engagement control devices
interferences
Customizable simultaneous alarm
management
System log storage capacity: 1500 events
Specialized power output for 14.4 V battery
charging
Automatic battery test with programmable
2A switching power supply
TP8-28 EN:
product certified according to EN 50131-3
grade 2
TP8-28 GSM
• As model TP8-28 but with integrated GSMGPRS transmission carrier.
• Network-Cell-Scanner function
• GSM Anti-Jamming self-protection function
• TP8-28 GSM EN:
product certified according to EN 50131-3
grade 2
28
Total logical zones
Zones
Outputs
System
features
2 conventional +
6 Bus
CPU wired zones
28
28
2 + 2 programmable
CPU outputs
Logical sirens
4
RS485 system bus
3
Access codes
120
Biometrics - Fingerprints
100
RFID Keys / Cards
100
129
8+8 24 characters
Phone queue items
32
63
modules
2
2
Console
8
Control devices
8
12
GSM communicator
1
Bus sirens
2
Radio sirens
2
4
Radio console
2
2 or perpetual
Remote controls
8
Cyclic timers
6
✓
Advanced
programming
iPhone - Android
Apps
✓
Printer management
PSTN
Primary carrier
32
Phone queue items
COMMUNICATION
VECTORS
16
Phone number book
6
Dashboard modules
4
230V AC +/- 10%
50Hz
150mA @ 13.8V DC
12V/7Ah
ABS
Dimensions (LxHxD)
Physical
specifications TP8-28 weight
350x285x93mm
2.7kg
TP4-20 GSM weight
Directive
220mA @ 13.8V DC
2A @ 14.8V DC
Enclosure
Conformity
Technical
features
Counters
Battery housing
158
64
Power supply
129
8+8 24 characters
Phone numbers
Timers
CPU TP8-28 power
requirement
PROG NET2
Communicable events
128
Electrical
CPU TP8-28 GSM power
specifications requirement
External GSM
Actions
Supply voltage
8
Communicators
Telephone
section
TP8-28
Communicable events
PROG NET2
6
Server cyclic test
Accessory
management
External GSM
Timers
Calendar years
Automation
Serial bus
expansions
80
Radio controls
Primary carrier
Phone numbers
8
Programs
Programs
access
management
Telephone
section
TP8-28 GSM
1500
8
GSM-GPRS
On the basis of the
model
Speech synthesis
Communicators
Systems TP8-28 • TP8-28 GSM - Technical and functional specifications
2.8kg
R&TTE 1999/05/EC
RSC®
MANAGEMENT
SENSOR BUS
RSC®
MANAGEMENT
SIREN BUS
TP8-28
PSTN • GSM• TCP/IP
TP8-28 GSM
GSM-GPRS • TCP/IP
25
TP8-28 • TP8-28 GSM
AVAILABLE MODELS
Name
Item no.
TP8-28
F101T28-UK
TP8-28 EN
F101T28EN-UK
TP8-28 GSM
F101T28G/V-UK
TP8-28 GSM EN
F101T28GEN/V-UK
Grade 2
Optional
✓
Optional
Optional
2A
✓
Optional
✓
Optional
Optional
2A
✓
Grade 2
✓
✓
Optional
Optional
2A
✓
✓
✓
Optional
Optional
2A
✓
Name
Item no.
ADVANCED
PROGRAMMING
F127T28/AV
Software module that enables the use of the advanced programming.
Interfaces and internal expansions
ESP4-20
Approved for
homologated
control units
Compatibility
TP8-28
TP8-28 GSM
Mounting position
A
B
C
D
C
D
Expansion card with 4 parallel zone inputs.
These inputs enable the wiring of conventional detectors and Zone Bus.
Item no. F127TP420ESP
TP PROX
Approved for
homologated
control units
Compatibility
TP8-28
TP8-28 GSM
Mounting position
A
B
Connection interface module for proximity key readers; you can connect to the interface up to 4
readers in parallel.
Item no. F127TPPROX
TP OUT6OC
Approved for
homologated
control units
Compatibility
TP8-28
TP8-28 GSM
Mounting position
A
B
C
D
6 logical output open collector expansion module. The 6 fully programmable outputs can be freely
associated with the logical outputs managed by the system.
Item no. F127TPOUT6OC
TP OUTREL
Approved for
homologated
control units
Compatibility
TP8-28
TP8-28 GSM
Mounting position
A
B
C
D
1 relay output expansion module with free exchange. The fully programmable output can be freely
Item no. F127TPOUTREL
26
Approved for
homologated
control units
TP BUSVOC
Compatibility
Mounting position
TP8-28
A
B
C
D
Serial line module RS485 (Serial Bus) with integrated speech synthesis (wire S).
The module allows the connection of all the serial expansion modules managed by the system.
Item no. F127TPBUSVOC
Approved for
homologated
control units
TP BUS
Compatibility
Mounting position
TP8-28
A
B
C
D
Serial line module RS485 (Serial Bus). The module allows the connection of all the serial expansion
modules managed by the system, except for the LCD300/S console.
Item no. F127TPBUS
PROG NET2
Compatibility
TP8-28
TP8-28 GSM
Mounting position
A
B
C
D
The module PROG NET2 allows to use the network as an IP communication carrier.
The interface allows to perform remote service and programming directly via the TCP/IP software.
Mounting positions
B
A
C
A
B
D
D
TP8-28
TP8-28 GSM
SERIAL BUS
SENSOR BUS
SIREN BUS
PSTN
GSM/GPRS
TCP/IP
TP8-28
Standard
component
Standard
component
Standard
component
Standard
component
Integrable on Serial
Bus (GSM only)
Integrable
internally
TP8-28 GSM
Standard
component
Standard
component
Standard
component
-
Standard
component
Integrable
internally
TP8-28 GSM - Accessories
module.
27
TP8-88 TP8-88 TP8-88 TP8-88 TP8-88 TP8-88 TP8-88 TP8-88 TP8-88 TP8-88
TP8-88
Bus system expandable from 8 to 88 zones.
TP8-88
Inputs
CPU
CONVENTIONAL*
8
ESP 4IN
SPEED
8 STD
SYSTEMS - TP8-88
No
SENSOR BUS
8
SPEED
8
SPEED
ALM8
SPEED
4 PLUS
SPEED
8 PLUS
SPEED
ALM8 PLUS
4
8
8
4
No
No
No
No
No
4
8
8
8
4
ZONE BUS
SPEED
4
No
No
No
TP8-88 TP8-88 TP8-88 TP8-88
30
SYSTEMS - TP8-88
H. 90mm
H. 445mm
D.
mm
115
L. 455mm
NVR
31
TP8-88
TP8-88
• Management of wired zones
(conventional or serial) and/or radio zones
• 8 inputs in Sensor Bus zone for serial detectors
• 1 Sensor Bus to connect bus detectors
and Data
• Integrated PSTN carrier, optional GSM-GPRS
and/or TCP/IP transmission carriers
• The GSM-GPRS carrier is provided with
Network-Cell-Scanner and Anti-Jamming
functions
Standard components
Integrations
Control modes
Interfaces
32
TTL
INTERFACE
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8 operating programs
8 remote controls
16 weekly timers
Customizable perpetual and/or biennial
calendar
202 access codes
100 radio controls
Operating programs freely associable with the
engagement control devices
interferences
Customizable simultaneous alarm
management
charging
Modular 6A switching power supply
System TP8-88 - Technical and functional specifications
Outputs
System
features
8 conventional +
8 Bus
CPU wired zones
88
88
5 programmable +
1 relay
CPU outputs
Logical sirens
8
RS485 system bus
3
Speech synthesis
✓
8
Programs
Programs
access
management
Access codes
202
100
RFID Keys / Cards
120
Radio controls
100
16
Timers
Timed messages
3
Remote controls
8
Cyclic test
2
8
Cyclic timers
Communicators
8
Primary carrier
PSTN
TCP/IP
263
Phone numbers
32
Control devices
15
16
Bus sirens
8
Radio sirens
4
Radio console
4
Touchscreen video console
3
IP cameras
24
NVR
✓
Personal Computer
✓
Actions
1024
Timers
512
Counters
128
48
4
iPhone - Android
Apps
Accessory
management
TECNO OUT protocol
Optional
Printer management
✓
230V AC +/- 10%
50Hz
Supply voltage
CPU board power requirement 150mA @ 13.8V DC
Electrical
specifications Modular power supply
6A @ 14.8VDC
Battery housing
Metal
Enclosure
Dimensions (LxHxD)
Physical
specifications Antenna height
Weight
Conformity
Directive
2 12V-17Ah
455x445x115mm
90mm
7kg
R&TTE 1999/05/EC
143
TP8-88
15
Reserved dashboard modules
8+8 24 characters
Phone queue items
Console
Phone number book
GSM-GPRS
Communicable events
Technical
features
Advanced
programming
✓
Server cyclic test
Telephone
section
TP8-88
Videoalarm
expansions
Quadrennial or
perpetual
Calendar years
Automation
Serial bus
expansions
8
2
7600
14
SYSTEMS - TP8-88
Zones
modules
88
Total logical zones
COMMUNICATION
VECTORS
RSC®
MANAGEMENT
SENSOR BUS
RSC®
MANAGEMENT
SIREN BUS
33
TP8-88
SYSTEMS - TP8-88
AVAILABLE MODELS
Name
Item no.
TP8-88
F101T88-UK
✓
Optional Optional Optional Optional
6A
✓
Name
Item no.
ADVANCED
PROGRAMMING
F127T88/AV
TECNO OUT
F127T88/TECNO
Software module that enables the operation of the protocol TECHNO OUT
Internal expansions
ESP 4IN
Mounting position
A
B
C
B
C
Expansion card with 4 parallel zone inputs.
These inputs enable the wiring of conventional detectors and Zone Bus.
Item no. F127ESP4IN
ESP OUT6OC
Mounting position
A
6 logical output open collector expansion module. The 6 fully programmable outputs can be freely
Item no. F127ESPOUT6OC
ESP LAN
Mounting position
A
B
C
The module allows to use the network as an IP communication carrier. The interface allows to
perform remote service and programming directly via the TCP/IP software.
Item no. F127ESPLAN
ESP GSM-GPRS
Mounting position
A
BB
C
GSM/GPRS phone module. The module allows to use as communication carrier also the mobile
network in GSM-GPRS mode.
Item no. F127ESPGSMGPRS
34
Mounting positions
B
C
SYSTEMS - TP8-88
A
TP8-88
TP8-88
SERIAL BUS
SENSOR BUS
SIREN BUS
PSTN
GSM/GPRS
TCP/IP
Standard
component
Standard
component
Standard
component
Standard
component
Integrable
internally
Integrable
internally
TP8-88 - Accessories
module.
35
TP8-96 VIDEO TP8-96 VIDEO TP8-96 VIDEO TP8-96 VIDEO TP8-96 VIDEO TP8-96 VIDEO
TP8-96 VIDEO
Bus system expandable from 8 to 96 zones.
SYSTEMS - TP8-96 VIDEO
TP8-96 VIDEO
Inputs
CPU
SPEED
8 STD
CONVENTIONAL*
8
8
ZONE BUS
No
No
SENSOR BUS
No
No
SPEED
4
SPEED
8
SPEED
ALM8 PL
SPEED
4 PLUS
SPEED
8 PLUS
SPEED
ALM8 PLUS
4
8
8
4
No
No
No
No
No
4
8
8
TP8-96 VIDEO TP8-96 VIDEO TP8-96 VIDEO TP8-96 VIDEO
38
H. 90mm
H. 435mm
D. 115mm
L. 475mm
NVR
39
TP8-96 VIDEO
TP8-96 VIDEO
serial) and/or radio zones
and Data
• Integrated GSM-GPRS and TCP/IP transmission
carrier, optional external GSM transmission
carrier
Standard components
Integrations
Control modes
Interfaces
40
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8 remote controls
16 weekly timers
Customizable biennial calendar
202 access codes
100 radio controls
8 port 8 channel integrated Ethernet switch for
network and Videoalarm device connection
interferences
charging
Modular 6.2A switching power supply
System TP8-96 VIDEO - Technical and functional specifications
Outputs
System
features
8
CPU wired zones
96
64
4 programmable +
1 relay
CPU outputs
Logical sirens
8
RS485 system bus
2
Speech synthesis
✓
8
Programs
Access codes
202
100
RFID Keys / cards
100
Radio controls
100
16
Timers
Automation
8
Calendar years
2
Timed messages
3
Remote controls
8
Cyclic test
✓
Server cyclic test
✓
Communicators
8
Primary carrier
GSM-GPRS
Telephone
Ethernet carrier
section
TP8-96 VIDEO Communicable events
Serial bus
expansions
External GSM
8 ports 8 channels
Videoalarm
expansions
Advanced
programming
Console
15
Control devices
15
16
GSM communicator
1
Bus sirens
8
Radio sirens
4
Radio console
4
3
32
51
24
NVR
✓
Personal Computer
✓
Actions
1024
Timers
512
Counters
128
Accessory
management
TECNO OUT protocol
TP8-96 VIDEO
GSM-GPRS • TCP/IP
Optional
Web server
✓
Printer management
✓
230V AC +/- 10%
50Hz
Supply voltage
Electrical
specifications Power supply
6.2A @ 14.8V DC
2 x 12V/12Ah
Battery housing
Metal
Enclosure
Dimensions (LxHxD)
Physical
Conformity
COMMUNICATION
VECTORS
4
iPhone - Android
Apps
Weight
Technical
features
48
Reserved dashboard modules
263
Phone queue items
IP cameras
Phone number book
8+8 24 characters
Phone numbers
2
2000
Programs
access
management
15
Zones
modules
96
Total logical zones
Directive
RSC®
MANAGEMENT
SENSOR BUS
System integration
475x435x115mm
90mm
9.6kg
R&TTE 1999/05/EC
RSC®
MANAGEMENT
SIREN BUS
41
TP8-96 VIDEO
AVAILABLE MODELS
Name
Item no.
TP8-96 VIDEO/V
F101TP96/V-UK
✓
✓
TP8-96 VIDEO/VA
F101TP96/VA-UK
✓
✓
TP8-96 VIDEO/VT
F101TP96/VT-UK
✓
✓
TP8-96 VIDEO/VAT
F101TP96/VAT-UK
✓
✓
6.2A
✓
6.2A
✓
✓
6.2A
✓
✓
6.2A
✓
✓
✓
Name
Item no.
ADVANCED
PROGRAMMING
F127TP96/AV
TECNO OUT
F127TP96/TECNO
TP8-96 VIDEO
SERIAL BUS
SENSOR BUS
SIREN BUS
PSTN
GSM/GPRS
TCP/IP
Standard
component
Integrable on
Serial Bus
Standard
component
-
Standard
component
Standard
component
TP8-96 VIDEO - Accessories
42
10 WAY CABLE FOR PROG USB
Interface cable for connecting the
control unit to the external programming
module PROG USB.
module.
Item no. C126CAVOPRUSB96
NOTES
43
TP16-256 TP16-256 TP16-256 TP16-256 TP16-256 TP16-256 TP16-256 TP16-256
TP16-256
Bus system architecture from 16 to 256 zones.
SYSTEMS - TP16-256
TP16-256
Inputs
CPU
SPEED
8 STD
CONVENTIONAL*
16
8
ZONE BUS
No
No
SENSOR BUS
No
No
SPEED
4
SPEED
8
SPEED
ALM8 PL
SPEED
4 PLUS
SPEED
8 PLUS
SPEED
ALM8 PLUS
4
8
8
4
No
No
No
No
No
4
8
8
TP16-256 TP16-256 TP16-256 TP16-256
46
SYSTEMS - TP16-256
H. 365mm
D. 110mm
L. 450mm
NVR
47
TP16-256
TP16-256
and Data
Standard components
Integrations
Control modes
Interfaces
48
TTL
INTERFACE
•
•
•
•
•
•
•
•
•
•
•
•
•
32 weekly timers
Customizable biennial calendar
202 access codes
60 radio controls
interferences
charging
Modular 3A switching power supply
IMQ approval - Level II
Outputs
16
CPU wired zones
256
128
4 programmable +
1 relay
CPU outputs
2
Serial bus
expansions
Console
32
Control devices
16
32
1
GSM communicator
32
Logical sirens
32
15
Bus sirens
System
features
RS485 system bus
1
Speech synthesis
✓
32
Programs
Automation
202
Access codes
64
RFID Keys / Cards
64
Radio controls
60
Timers
32
8
Calendar years
2
Timed messages
3
Remote controls
16
Cyclic test
✓
Server cyclic test
✓
Communicators
8
Primary carrier
PSTN
Telephone
section
TP16-256
727
4
Radio console
4
3
32
IP cameras
24
NVR
✓
Personal Computer
✓
Actions
1024
Timers
512
Phone number book
48
Dashboard modules-outputs
16
iPhone - Android
Apps
Accessory
management
TECNO OUT protocol
✓
Printer management
✓
230V AC +/- 10%
50Hz
Supply voltage
Electrical
3A @ 14.8V DC
Battery housing
12V/17Ah
Metal
Enclosure
Physical
Dimensions (LxHxD)
specifications
8+8 16 characters
Phone queue items
450x365x110mm
7.0kg
Weight
Conformity
Directive
R&TTE 1999/05/EC
156
TP16-256
Advanced
programming
PROG NET2
Communicable events
Technical
features
Videoalarm
expansions
External GSM
Phone numbers
Radio sirens
3000
Programs
access
management
SYSTEMS - TP16-256
Zones
modules
256
Total logical zones
COMMUNICATION
VECTORS
RSC®
MANAGEMENT
SENSOR BUS
System integration
RSC®
MANAGEMENT
SIREN BUS
System integration
49
TP16-256
SYSTEMS - TP16-256
AVAILABLE MODELS
Name
Item no.
TP16-256
F101TP16256-UK
✓
Optional
✓
✓
✓
3A
Connection interfaces
PROG NET2
Mounting position
A
Interface module for the connection of the control unit to the Ethernet network. The module PROG
NET2 allows to use the network as an IP communication carrier. The interface allows to perform
remote service and programming directly via the TCP/IP software.
PROG NET2
TECNO OUT
Mounting position
A
Interface module for the connection of the control unit to the Ethernet network. The module
PROG NET2 TECNO OUT uses the network as IP communication carrier which transfers the
communication data of the TECNO OUT protocol. Dimensions (LxHxD) 67x95x31mm. Grey.
Item no. F130PROGNET2TO
Mounting position
A
TP16-256
TP16-256
50
SERIAL BUS
SENSOR BUS
SIREN BUS
PSTN
GSM
TCP/IP
Standard
component
Integrable on
Serial Bus
Integrable on
Serial Bus
Standard
component
Integrable on
Serial Bus
Integrable
internally
SYSTEMS - TP16-256
NOTES
51
TP16-512 TP16-512 TP16-512 TP16-512 TP16-512 TP16-512 TP16-512 TP16-512
TP16-512
Bus system architecture from 16 to 512 zones.
SYSTEMS - TP16-512
TP16-512
Inputs
CPU
SPEED
8 STD
CONVENTIONAL*
16
8
ZONE BUS
No
No
SENSOR BUS
No
No
SPEED
4
SPEED
8
SPEED
ALM8 PL
SPEED
4 PLUS
SPEED
8 PLUS
SPEED
ALM8 PLUS
4
8
8
4
No
No
No
No
No
4
8
8
TP16-512 TP16-512 TP16-512 TP16-512
Siren Bus
not managed
54
SYSTEMS - TP16-512
H. 90mm
H. 435mm
D. 115mm
L. 475mm
NVR
55
TP16-512
TP16-512
• Wired zones manageable: up to 400
• 1 Serial Bus to connect system peripherals
(expansion of wired and wireless zones)
• 1 Serial Bus to connect system peripherals
(control devices, output modules and external
GSM)
and Data
• Integrated PSTN, GSM-GPRS and TCP/IP
transmission carrier, optional external GSM
transmission carrier
Standard components
Integrations
Control modes
Interfaces
56
TTL
INTERFACE
• Integrated vocabulary, for the customization
ustomization
of zone names, programs, and remote controls
• 64 weekly timers
• 8 time ranges for access
• Customizable biennial calendar
• 302 access codes
• 200 RFID keys and/or cards
• 100 radio controls
• Management of biometric readers of
• 8 channel integrated Ethernet port for network
and Videoalarm device connection
• Digital control of the radio coverage and
interferences
• System log storage capacity: 6000 events
• Specialized power output for 14.4 V battery
charging
• Automatic battery test with programmable
• Modular 6.2A switching power supply
Zones
Outputs
CPU wired zones
400
256
6 programmable +
1 relay
Logical sirens
48
3
16
CPU outputs
modules
512
Serial bus
expansions
Console
32
Control devices
16
48
1
GSM communicator
32
15
Bus sirens
System
features
RS485 system bus
3
Speech synthesis
✓
32
Programs
Access codes
302
100
RFID Keys / Cards
200
Radio controls
100
64
Timers
Automation
8
Calendar years
2
Timed messages
3
Remote controls
32
Cyclic test
✓
Server cyclic test
✓
Communicators
8
Primary carrier
PSTN
Secondary carrier
Telephone
section
TP16-512
GSM-GPRS
Ethernet carrier
1 port 8 channels
Optional carrier
External GSM
Videoalarm
expansions
Advanced
programming
8+8 24 characters
32
Phone queue items
Accessory
management
4
3
COMMUNICATION
VECTORS
IP cameras
24
NVR
✓
Personal Computer
✓
Actions
1024
Timers
512
Counters
128
Phone number book
48
Dashboard modules-outputs
16
iPhone - Android
TECNO OUT protocol
Optional
Web server
✓
Printer management
✓
230V AC +/- 10%
50Hz
Electrical
6.2A @ 14.8V DC
2x 12V/12Ah
Battery housing
Metal
Enclosure
Dimensions (LxHxD)
Physical
Weight
Conformity
TP16-512
Radio console
Supply voltage
143
Technical
features
4
Apps
1239
Communicable events
Phone numbers
Radio sirens
6000
Programs
access
management
SYSTEMS - TP16-512
Total logical zones
Directive
RSC®
MANAGEMENT
SENSOR BUS
System integration
475x435x115mm
90mm
9.7kg
R&TTE 1999/05/EC
RSC®
MANAGEMENT
SIREN BUS
57
TP16-512
SYSTEMS - TP16-512
AVAILABLE MODELS
Name
Item no.
TP16-512/VA
F101T512/VA-UK
✓
✓
✓
✓
TP16-512/VAT
F101T512/VAT-UK
✓
✓
✓
✓
✓
6.2A
✓
6.2A
✓
Name
TECNO OUT
Item no.
F127T512/TECNO
TP16-512
SERIAL BUS
SENSOR BUS
SIREN BUS
PSTN
GSM/GPRS
TCP/IP
Standard
component
Integrable on
Serial Bus
Standard
component
Standard
component
Standard
component
Standard
component
TP16-512 - Accessories
58
10 WAY CABLE FOR PROG USB
Interface cable for connecting the
control unit to the external programming
module PROG USB.
module.
Item no. C126CAVOPRUSB96
SYSTEMS - TP16-512
NOTES
59
CONSOLES
CONTROL UNITS
A wide range of control devices which meets the highest regulation, quality and
safety standards, able to solve any application and use requirement.
Console with speech synthesis, graphical displays, touch screens that inform
and interact with the user in a simple and intuitive manner. Electronic proximity
keys, RFID cards, biometric readers of fingerprints.
Each user can find in the Tecnoalarm devices the best solution for his needs for
practicality, ease of use and security.
Code
Typing a code is something that we make every day. A numerical sequence
to manage also our security system through the interactivity offered by the
Tecnoalarm console.
Transponder
The electronic key has always been the most classic and practical control
device. The transponders of Tecnoalarm guarantee the highest standard of
unbreakability and the highest number of possible combinations.
RFID card
The RFID card is a device which is practical and reliable, with a level of
security that can only be guaranteed by a unique code, with a high number of
combinations, factory customized by Tecnoalarm.
Fingerprint
This fingerprint, the most personal and unique code encoded in our hands,
used to control a security system with simple gestures with the tip of your
fingers.
60
61
CONSOLES AND CONTROL UNITS
Consoles
UNIVERSAL TOUCH SCREEN
Programming and multifunctional management console. TFT 7” touch screen display. Integrated speech
interface, 8 language vocabulary. Simple, intuitive interactive graphic interface. Contextual, sound and
graphics help function, which can be accessed by the user. USB interface. Program Management max. 32.
RS485 bus connection. Surface-mounted or flush-mounted. Refined design, ultra-thin line. Antistatic ABS
enclosure. Dimensions (LxHxD) 225x157x35mm. White cover (interchangeable).
L. 225mm
D. 35mm
D. 16.5mm
Wall mounting
Flush mounting
H. 157mm
UTS A - UNIVERSAL TOUCH SCREEN WITH FLOOR PLAN MANAGEMENT
Item no. F127TSP7LAVA (provided with white cover)
UTS - UNIVERSAL TOUCH SCREEN
Item no. F127TSP7L (provided with white cover)
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
UNIVERSAL TOUCH SCREEN - Accessories
Item no. F127TSP7LCGT (titanium grey cover replacement)
Item no. F127TSP7LCG (metallic grey cover replacement)
Item no. F127TSP7LCN (black cover replacement)
Base to be flush mounted for Universal Touch Screen consoles. The base may be inserted in the wall,
the console can be mounted later.
Attention: the Universal Touch Screen console is always sold complete with base for flush mounting.
Item no. C110BASETSP7L
UNIVERSAL TOUCH SCREEN - Optional software modules
FLOOR PLANS
Optional software module that enables the Universal Touch Screen
console for the floor plan management. It allows the management and the
customization of (up to 32) floor plans.
Item no. F127TSP7L/AV
62
LCD300/S
Approved for
homologated
control units
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Programming and management console. 2X16 character LCD-display with backlight.
Integrated speech interface. Program Management max.15. RS485 bus connection.
Surface Mount. Elegant design by Pininfarina. Antistatic ABS enclosure.
Dimensions (LxHxD) 120x175x46mm. White.
Item no. F127LCD300S
LCDPROX1
Approved for
homologated
control units
Compatibility
TP8-28
TP8-28 GSM
TP8-88
Programming and management console. Back-lit LCD graphics display.
Integrated reader for proximity keys PROX KEY. Program Management max. 8.
RS485 bus connection. Surface Mount. Refined and elegant design.
Antistatic ABS enclosure. Dimensions (LxHxD) 150x119x35mm. White.
Item no. F127LCDPROX1
LCD020
Compatibility
TP4-20
TP4-20 GSM
Program Management max. 4. Displays the status of 20 zones.
RS485 bus connection. Surface mounting. Antistatic ABS enclosure.
Note: the console LCD020 can only be used as an alternative to the console LCD012 and LED06.
Item no. F127LCD020
LCD012
Compatibility
TP4-20
TP4-20 GSM
Program Management max. 4. Displays the status of the first 12 zones.
RS485 bus connection. Surface Mount. Antistatic ABS enclosure.
Note: the console LCD012 can only be used as an alternative to the console LCD020.
Item no. F127LCD012
LED06
Compatibility
TP4-20
TP4-20 GSM
Management console. Signals with LED. Program Management max. 4.
Displays the status of the first 6 zones. RS485 bus connection. Surface Mount.
Note: the console LCD06 can only be used as an alternative to the console LCD020.
Item no. F127LED06
63
Transponder readers
The electronic key has always been the most classic and practical control device for
security systems. The transponders of Tecnoalarm guarantee the highest standard of
unbreakability of the code and the highest number of possible combinations.
The transponder readers can only be used in conjunction with interfaces TP PK, TP PROX, TP SKN and TP K6N, on
all Tecnoalarm systems which provide for their use.
ATPROX/I
Approved for
homologated
control units
ATPROX/L
Approved for
homologated
control units
Reader of transponders PROXKEY.
Module for flush mounting for frames
Vimar series IDEA*.
Black.
BTicino series Living*. Black.
Item no. F103ATPROX/I
Item no. F103ATPROX/L
ATPROX/LINT
Approved for
homologated
control units
ATPROX/LINB
Approved for
homologated
control units
BTicino series Living International*.
Black.
BTicino series Living International*.
White.
Item no. F103ATPROX/LINT
Item no. F103ATPROX/LINB
ATPROX/MN
Approved for
homologated
control units
ATPROX/M
Approved for
homologated
control units
BTicino series Magic*. Black.
BTicino series Magic*. White.
Item no. F103ATPROX/MN
Item no. F103ATPROX/M
* The names and trademarks mentioned are property of their respective manufacturers BTicino and VIMAR.
Transponders
Approved for
homologated
control units
PROXKEY
PROXKEY HIGH SECURITY
Transponder. Programmed with unique
code. Reprogrammable and duplicable
with device PROX PROGRAMMER.
Grey.
High security transponder.
Programmed with unique code.
The key cannot be duplicated or
reprogrammed. Blue colour.
Item no. F103PROXKEY
Approved for
homologated
control units
Item no. F103PROXKEYHS
RFID keys - Accessories
PROX PROGRAMMER
Code programmer and duplicator for
PROXKEY.
Converter of codes of MPKEY and
Personal Key into PROXKEY.
Item no. F103PROXPROGRAM
64
Key points and interfaces
PROX K6N
Compatibility
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
TP8-96 VIDEO
TP16-256
TP16-512
Key point. Reader of RFID proximity keys. Signals with LED.
Program Management max. 4. RS485 bus connection. Surface Mount.
Item no. F127PROXK6N
TP SKN
Approved for
homologated
control units
Compatibility
TP8-88
Interface device for connecting key readers to serial line RS485 Serial Bus.
Interface for key readers series ATPROX and ATPK. Key readers which can be connected; max. 4.
Item no. F127TP-SKN
Keypads
D. 24mm
L. 81mm
H. 121mm
DIGITEX
Compatibility
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Capacitive keypad for outdoor mounting. Touch-sensitive steal membrane. Grazing keypad lighting
with LED light strip. Optical and acoustic system status signaling through buzzer and 7 LED.
Management of 4 programs. Connection via RS485 serial bus. Surface mounting.
Vandal-proof aluminum die-cast casing IP67. 6m prewired cable.
Dimensions (LxHxD) 81 x 121 x 24mm. Gloss varnish, gray metallic color.
Item no. F103DIGITEX
65
APR - Access Point Readers
APR CARD
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Personal security card and Keyfob card reader. Signals with LED. Program Management max. 3.
Dimensions (LxHxD) 91x138x54mm.
Item no. F103APRCARD/G (charcoal grey)
Item no. F103APRCARD/N (shiny black)
Item no. F103APRCARD/B (white)
APR FINGER
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Fingerprint reader. Signals with LED. Stores up to 100 fingerprints in encrypted mode. Program
Management max. 3. RS485 bus connection. Surface Mount. Antistatic ABS enclosure. Dimensions
(LxHxD) 91x138x54mm.
Item no. F103APRFIN/G (charcoal grey)
Item no. F103APRFIN/N (shiny black)
Item no. F103APRFIN/B (white)
APR FINGER-CARD
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Reader of RFID cards and fingerprints. Operation with standalone or combined reading.
Stores up to 100 fingerprints in encrypted mode. Program Management max. 3. RS485 bus
connection. Surface Mount. Antistatic ABS enclosure. Dimensions (LxHxD) 91x138x54mm.
Item no. F103APRFINCAR/G (charcoal grey)
Item no. F103APRFINCAR/N (shiny black)
Item no. F103APRFINCAR/B (white)
RFID cards
PERSONAL SECURITY CARD
KEY FOB
RFID transponder card for APR readers.
Programmed with unique code. The key
cannot be duplicated or reprogrammed.
Card format.
Pack of 10*.
RFID transponder card for APR readers.
Programmed with unique code. The key
cannot be duplicated or reprogrammed.
Format: pendant.
Pack of 10*.
Item no. F103CARD
Item no. F103KEYFOB
APR FINGER - Accessories
CABLE MINI USB TYPE A
Mini-USB interface cable to program the
fingerprints readers APR FINGER and
APR FINGER-CARD.
Item no. F130CAVOMINIUSB
66
FINGER KEY - Relay board
The FINGER KEY relay board permits the connection of APR FINGER biometric fingerprint readers offering
the possibility of managing different kinds of electrical appliances with the simple touch of a finger.
Ease of use combined with the effective security guaranteed by biometric recognition of fingerprints,
the unique singularity of the fingerprint ensures that only authorised users can operate the system.
FINGER KEY
Relay board for connecting APR FINGER fingerprint readers. Manages 3 programmable outputs to
control electric appliances.
Up to 4 APR FINGER control devices can be connected to the board on RS485 bus.
Card dimensions (LxHxD) 70x100x20mm.
Note: programming software APR CONF included. Enclosure not included.
Item no. F103APRFINKEY
APR FINGER
Fingerprint reader. Signals with LED. Stores up to 100 fingerprints in encrypted mode. Manageable
controls: max. 3. RS485 bus connection. Surface Mount.
Antistatic ABS enclosure. Dimensions (LxHxD) 91x138x54mm.
Item no. F103APRFIN/G (charcoal grey)
Item no. F103APRFIN/N (shiny black)
Item no. F103APRFIN/B (white)
Tamper
out
Lights
Roll
Roller
Door
Doo
shutters
control
POWER SUPPLY
SERIAL BUS
APR FINGER - Accessories
CABLE MINI USB TYPE A
Mini-USB interface cable to program the
fingerprints readers APR FINGER.
Item no. F130CAVOMINIUSB
67
MODULES
EXPANSION MODULES
INPUTS - OUTPUTS - SERIAL LINE
The flexible architecture and the modular structure can be considered absolute
properties of the Tecnoalarm systems, properties which the range of the expansion
modules of inputs, outputs, and serial lines, fully meet.
Tecnoalarm has streamlined the concept of modular architecture, by providing
expansion modules that can be used equally by all its systems.
The expansion modules connected on the Serial Bus line allow to locate the inputs
and the outputs of the system in the most comfortable positions, where actually
necessary, favouring a simpler, streamlined routing of the connecting cables.
The range of extensions of the SPEED family is composed of four models, with
4 or 8 inputs, with or without power supply, with and without alarm outputs.
They can satisfy every installation need.
The range of output extensions is composed of two models ESP32-OCN which
is provided with 32 open collector electrical outputs and the SINOTTICO 32N
that has 32 signalling LEDS.
The serial line repeater modules allow to increase the maximum extension of the
serial line. With them you can also create star connections of the serial lines.
68
69
Expansion modules
EXPANSION MODULES
SPEED ALM8 PL
Compatibility
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Area expansion module equipped with 8 parallel zone inputs. The inputs enable the wiring of
Tecnoalarm RDV® detectors, Zone Bus and conventional detectors. 4 programmable outputs 1.8A
switching power supply RS485 bus connection. Elegant design by Pininfarina.
Antistatic ABS enclosure. Battery housing: 1 12V-7Ah. Dimensions (LxHxD) 350x285x93mm.
Complies with CEI - Level II.
Item no. F101SPEEDALM8PL
Approved for
homologated
control units
SPEED 8
Compatibility
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Tecnoalarm RDV® detectors, Zone Bus and conventional detectors.
2 programmable outputs RS485 bus connection. Dimensions (WxH) 124x68mm.
Note: optional enclosure is not included (C100P or C90 compatible containers).
Item no. F101SPEED8
Approved for
homologated
control units
SPEED 4
Compatibility
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Tecnoalarm RDV® detectors, Zone Bus and conventional detectors. 1 programmable output RS485
bus connection. Dimensions (WxH) 98x68mm.
Item no. F101SPEED4
Approved for
homologated
control units
SPEED 8 STD
Compatibility
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
conventional detectors. RS485 bus connection. Dimensions (WxH) 98x68mm.
Item no. F101SPEED8STD
Input expansion modules - Accessories
70
C100P
C90
ABS enclosure. Pininfarina design
White.
ABS enclosure.
White.
Item no. C110C100P
Item no. C110C90
Compatibility
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
EXPANSION MODULES
ESP32-OCN
TP16-512
32 open collector outputs expansion module. The modules provide information about the functional
states of the system. Signals are divided into logic blocks composed of 32 outputs. Each logic block
corresponds to a physical address. The setting of the physical address of the module determines
the block of information that it provides. RS485 bus connection. Dimensions (WxH) 97x85mm.
Item no. F127ESP32OCN
SINOTTICO 32N
Approved for
homologated
control units
Compatibility
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Expansion module with 32 signaling leds. The modules provide visual information about the
functional states of the system. Signals are divided into logic blocks composed of 32 LEDS. Each
logic block corresponds to a physical address.
The setting of the physical address of the module determines the block of information that it
provides. RS485 bus connection. Dimensions (LxHxD) 150x118x35mm.
Item no. F127SINOTTICON
SPEED RS485
Compatibility
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
RS485 serial line repeater module. Connections 1 input bus 1 output bus (protected).
The repeater extends the maximum extension of the serial line of the system by additional 1000
meters. The module SPEED RS485 allows to extend the serial line in a linear manner and/or 1
branch (star connection). Programmable bus speed: fast or slow.
Dimensions (WxH) 97x85mm.
Item no. F127SPEEDRS485
STAR RS485
Compatibility
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
RS485 serial line repeater module. Connections 1 input bus 6 output buses (protected).
The repeater allows branching the serial line of the system with up to 6 branches (1000 meters
each). (star connection) or branching up to 3 loops (800 meters each) (closed loop).
Programmable bus speed: fast or slow. Dimensions (WxH) 176x74mm.
Note: optional container is not included (C100P compatible containers).
Item no. F127STAR485
71
RSC TECHNOLOGY
TECHNOLOGY
®
Remote Sensitivity Control
RSC® is a unique remote control technology developed by the research centre
of Tecnoalarm, which is able to manage, using proprietary protocols, the
communication between the alarm system and the technical and operational
control centre at the headquarters of the installation company.
It allows to control the functionality of each device, in order to maintain and
continuously improve its performance.
System configuration - The singularity of the RSC® technology (Remote Sensitivity Control) consists
in the possibility of programming and checking, both locally and remotely, all the functioning
parameters of the system, starting with those of the control panel to those of the detection and
signaling devices. The analysis and diagnosis tools permit checking of the electrical and functional
parameters of the RSC® peripherals on demand whenever it is considered necessary.
Hardware coherence control - The Hardware coherence control tool analyzes the RSC devices and
draws a system overview which contains all the logical and functional parameters. It identifies the
connected devices, verifies the consistency of the serial address and configuration and indicates
the hardware and firmware releases, the supply values as well as the internal temperature of the
infrared detectors. The overview can serve as an inspection report in order to certify the efficiency of
the system on the basis of objective data.
Network analysis - The Network analysis tool constantly monitors all the communications of the devices
connected to the RS485 serial lines, Serial Bus, Sensor Bus and Siren Bus, and verifies the correctness
of the exchanged data. Two counters sum up all the communications and communication errors. The
number of communication errors gives an indication of the quantity of electrical interferences and the
quality of the serial line. The tool provides further support by comparing the counters and classifying the
percentage of errors as insignificant, negligible or critical by means of colors.
Barrier alignment monitor - The alignment monitor tool for the RSC® barriers permits electronic
monitoring of the alignment of the beams, both locally and remotely. For each beam of the
barrier, the tool shows the level of the captured signal, compares it with the reference values
recorded during setup and classifies it as good, critical or insufficient with the help of a graduated
scale and the colors green, yellow or red.
Functioning monitor - The Functioning monitor tool permits the real time control of the RSC® detectors
functioning. A graph shows the signal detected by the infrared, microwave or antimasking sensors. In
addition, it is possible to consult the temperature logger and the last six alarms graphs.
Alarm graphs - The alarms coming from the RSC® detectors are stored into the system’s event buffer
together with a graph indicating functioning at the moment the alarm has occurred. By analyzing the
graph it is possible to determine and understand the cause of the alarm. The RSC® detectors can store
up to six graphs during each functioning session.
Event log - The event log contains all the events relating to the system’s functioning, i.e. alarms,
diagnostics and system status signaling. The events are stored in reverse chronological order,
with indication of date and time and all the details concerning the functioning status as well as
possible telephone calls. The affected zones, programs and remote controls are identified by a
number or a description. The installer can download the event log at any time, in order to analyze
the system’s functioning.
Device window - The acquisition of data is essential to provide a professional maintenance service
and the RSC® technology being a reliable tool of supervision, control and analysis is a useful
innovation. The possibility of monitoring the functional parameters of the devices connected to the
serial bus allows preventive maintenance and the prevention of failures caused, for example, by
power supply errors.
72
Guida alla tecnologia RSC ®
Remote Sensitivity Control
Learn more about the capabilities that make the RSC® technology unique and indispensable.
Request the publication dedicated to the topic "Guide of the RSC® technology"
73
RSC® technology
Connection and safety buses
The Tecnoalarm systems include three communication buses, each with its own specialization: the Serial Bus
(system bus), the Sensor Bus, and the Siren Bus.
The three buses are independent and use specific communication protocols. To ensure a high level of protection
from tampering attempts, the Buses of the system are protected and the communication data are encrypted.
Documentation and support
With the hardware consistency tool the installer can produce a document that certifies system composition
and efficiency of the devices. The RSC® detectors record detailed information for each type of event. In case of
necessity, the installer can highlight his professionalism by providing to the customer precise answers, backed
up by data recorded in the event memory and by the alarm graphs.
Installation
The RSC® technology allows a 70% reduction of wiring time and cost, a reduction and simplification of the
wiring itself. At the end of the installation the hardware consistency tool checks for errors in the realization and
programming stages. The tool also detects the internal temperature of the detectors and the supply voltage of
the devices.
Maintenance and checks
The installation team can check, directly from their office, the setting and functionality of each device. This
allows to perform remotely at least one of the two annual maintenance checks, as provided by the regulations.
Also the sirens are constantly checked, the tool checks and provides information on the status of the battery, the
functionality of the horn, of the flashing light and of the self-protection devices.
RSC®
74
7
The licence option, identified by the number 7,
enables the management of the RSC® devices.
The license option can be used in conjunction with
the following software: Local/remote programming,
Remote management and TCP/IP.
SPEED PLUS
SPEED PLUS
INPUT EXPANSIONS
The architectural flexibility and the modular structure can be considered absolute properties of the
Tecnoalarm systems. Properties which the range of zone expansion modules SPEED PLUS fully meets.
Three models are available to meet any installation requirement and to fully exploit the functionality of
the RSC ® detectors.
SPEED ALM8 PLUS
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Expansion Module with 8 serial zone inputs for RSC ® Tecnoalarm detectors connectable over
4 RS485 Sensor Bus lines. 1 RS485 Siren Bus line for the connection of RSC® serial sirens. 4
programmable outputs 1.8A switching power supply RS485 bus connection. Elegant design
by Pininfarina. Antistatic ABS enclosure. Battery housing: 1 12V-7Ah. Dimensions (LxHxD)
350x285x93mm. Complies with CEI - Level II.
Item no. F101SPEALM8PLUS
Approved for
homologated
control units
SPEED 8 PLUS
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Expansion module with 8 serial zone inputs for RSC ® Tecnoalarm detectors connectable over 1
RS485 Sensor Bus line. 2 programmable outputs RS485 bus connection. Dimensions (WxH)
124x68mm.
Item no. F101SPEED8PLUS
Approved for
homologated
control units
SPEED 4 PLUS
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Expansion module with 8 zone inputs (4 serial zone inputs + 4 parallel zone inputs).
1 RS485 Sensor Bus line for the connection of 4 Tecnoalarm RSC® detectors. The parallel inputs
enable the wiring of Tecnoalarm RDV® detectors, Zone Bus and conventional detectors.
1 programmable output RS485 bus connection. Dimensions (WxH) 124x68mm.
Item no. F101SPEED4PLUS
SPEED PLUS - Accessories
C100P
C90
ABS enclosure. Pininfarina design
White.
ABS enclosure.
White.
Item no. C110C100P
Item no. C110C90
75
INDOOR
RSC® technology
VOLUMETRIC PROTECTION
TWINTEC BUS
In the design of the TWINTEC BUS detectors, Tecnoalarm has leveraged all its experience.
The sophisticated digital processing of the signals detected by the two sections of the infrared and
microwave detector, enables a sure discrimination of the alarms. The AND and WALK detection logics,
combined with the RDV ® technology, are only some of the many programmable operating parameters.
The automatic functions, self test and the temperature compensation, complete a set of features of absolute
importance. The model TWINTEC MASK BUS 18 is provided with anti-masking security, to which, in case of
necessity, is subjected the programmed detection logic which automatically becomes OR.
W. 68mm
D. 51mm
H. 118mm
TWINTEC BUS - Technical and functional specifications
Microwave (MW)
Sensitivity
Detection
Programmable 4 levels
IR pulse counter
IR sensitive areas
29
IR detection plan
4
AND
OR
WALK
RDV®
WALK RDV®
Opening angle
IR
MW
Alarm
Alarm and
status signal
Tamper
Mask
Fail
Selfprotections
76
Delay
Max. capacity
Detection
logics
10.525GHz*
Anti-opening/removal
Anti-masking
18m
IR+MW
Functions
Power supply
Power
requirements
Connection
Standby
Programmable
Self test
Automatic
Temperature
compensation
Automatic
Supply voltages
9V DC...15V DC
Twintec Bus 18
Idle 17mA @ 12V DC
Alarm 28mA @ 12V DC
Twintec Mask Bus 18
Idle 20mA @ 12V DC
Alarm 30mA @ 12V DC
RS485 Sensor Bus
Addressed detector
IR or MW**
AND (IR+MW) + WALK
(MW+MW)
AND (IR+MW)
with RDV® processing
MW+MW
108°
72° horiz. - 36° vert.
Detection alarm
Tampering alarm
Operating temperature
Environmental class
Protection Degree
Physical
Safety Degree
specifications
-10°C...+55°C
II
IP30-IK02
Twintec Bus
(Grade 2)
Twintec Mask Bus
(Grade 3)
Enclosure
Antistatic ABS
Dimensions (LxHxD)
68x118x51mm
Weight
160g
Masking alarm**
Failure signals
Mechanical
micro-switches
Electronic
programmable*
* Product also available with 9.9GHz and 9.35GHz frequencies
** Only available on Twintec Mask Bus 18
INDOOR
TWINTEC BUS
VOLUMETRIC PROTECTION
TWINTEC BUS 18
The TWINTEC BUS 18 detector complies with the standard EN 50131-2-4 - Grade 2
Item no. F102TWINB18/V (Frequency 10.525GHz - Frequency homologated for Italy)
Item no. F102TWB18/V-99 (Frequency 9.9GHz - Frequency homologated for foreign countries)
Item no. F102TWB18/V-93(Frequency 9.35GHz - Frequency homologated for foreign countries)
TWINTEC MASK BUS 18
The TWINTEC MASK BUS 18 detector complies with the standard EN 50131-2-4 - Grade 3
Item no. F102TWINMB18/V (Frequency 10.525GHz - Frequency homologated for Italy)
Item no. F102TWMB18/V-99 (Frequency 9,9GHz - Frequency homologated for foreign countries)
Item no. F102TWMB18/V-93 (Frequency 9.35GHz - Frequency homologated for foreign countries)
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
The tables of the operational frequencies homologated in the various countries are reported at page 100.
TWINTEC BUS - Accessories
SNODO 2000
Self-protected swivel mounting brachet,
orientation, +/-45° Horiz. -15° vert. The
TWINTEC BUS 18 and TWINTEC MASK BUS 18
matched to the joint maintain their
characteristics of certification unchanged.
Item no. F102SNODO2000
Coverage diagrams
77
OUTDOOR
RSC® technology
OUTDOOR PROTECTION
TRIRED BUS
The TRIRED BUS detector features a unique protection technique with a triple passive infrared. Designed for
outdoor use, resistant to weathering and extreme weather conditions, ideal as a solution for the protection of
perimeter areas with a range of up to 30 meters, adjustable for each beam. Equipped with ample opportunities
for orientation, it offers solutions for the protection of doors, windows, balconies and areas close to homes.
Three protection beams with AND detection logic (8 modes), 3 independent alarm counters (1 for each beam),
are only some of the many programmable parameters. TRIRED BUS features anti-masking security, to which
the detection logic (which automatically becomes AND of 2 beams) is subjected in case of need.
W. 82mm
D. 260mm
Horizontal axis
+90°
-90°
Vertical axis
H. 400mm
+10°
-10°
TRIRED BUS - Technical and functional specifications
Sensitive elements
Detection beams
Detection
Detection plans
Rated range
Sensitivity
Detection
logics
3 IR sensors dual
element
3 with curtain effect
3 on the same axis
AND of 2 beams (definite)
3 mode
AND of 3 beams
(indefinite)
1 mode
AND of 3 beams (priority)
3 mode
Pulses
Anti-masking
Independent for the 3
beams
Programmable from
1 to 4
Mechanical
micro-switches
Independent electronic
on the 3 beams
Self-protections Anti-masking sensitivity Programmable 2 levels
Anti-masking alarm
Functions
max. 30m
1 mode
Programmable 3 modes
Mask alarm validation
Programmable 4 times
Alarm
Detection alarm signal
Always active or with
program ON
Self test
Programmable for each
beam - 16 levels
AND of 2 beams
(indefinite)
Pulse counters
Conditioning
Power supply
Power
requirements
Connection
Fail (fault)
78
Tamper alarm signal
Signals alarm and beam
number in Mask
Signals beam number
in Fail
Automatic independent
on the 3 beams
Temperature
compensation
Automatic
Coverage test
Monitored by LEDS and
buzzer
Rated Voltage
12V DC
Supply voltage
10V DC...14.5V DC
Idle and in alarm
13mA at 12V DC
Maximum in test
20mA at 12V DC
RS485 Sensor Bus
Environmental class
Enclosure protection
degree
Physical
Orientability
specifications
Enclosure
Dimensions (LxHxD)
Weight
Self-Protection
Alarm and
status signals Mask
Programmable
Addressed sensor
-20°C...+65°C
II
IP55-IK04
Horizontal +/-90° Vertical +/-10°
UV resistant antistatic
ABS
82x400x260mm
1.2kg
OUTDOOR
TRIRED BUS
OUTDOOR PROTECTION
TRIRED BUS
Item no. F102TRIREDBUS
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
TRIRED BUS - Volumetric projection at 30m
79
OUTDOOR
RSC® technology
OUTDOOR PROTECTION
WINBEAM/S - DOORBEAM/S
The serial barriers WINBEAM/S and DOORBEAM/S represent the best solution for the peripheral protection
of entrances of apartments, houses and buildings in general. They can be used in protected outdoor or
indoor areas, offer considerable resistance to mechanical stress and weathering. They are distinguished
by superior characteristics, operational flexibility, and ease of installation. The sophisticated digital
synchronism immunizes the barrier from parasite reflections and other disturbing factors.
The wide range, articulated in different colours and heights, also customizable, is characterized
by a functional and elegant design that allows seamless integration in every architectural context.
Dimensions
D. 19mm
L. 25mm
L
H
D
25
600
19
25
800
19
25
1050
19
25
1300
19
25
1550
19
25
1800
19
25
2050
19
H (see table)
WINBEAM/S - DOORBEAM/S - Technical features and functions
Range (beam power)
Programmable on 3 levels (minimum 4m, average 8m, maximum 16m)
Programmable 2 positions
Cable position
Programming
Enabling/disabling of each beam
Beam enabling
Intervention time
Alarm detection
Zone Bus
Wiring type
Cable supplied prewired length 6m
Wiring
Connection
3 wire connection (2 for supply + 1 zone entry)
Connection method
Automatic digital
Synchronism
Power supply
Supply voltage
9.5V to 14.5V DC
Rated Voltage
12V DC
Anodised aluminum
Enclosure
-10°C to +40°C
Physical specifications
Power requirements
80
Environmental classification
III (EN 50130-5)
Enclosure protection degree
IP52
WINBEAM/S 60
TX min 7.2mA
TX max 16.5mA
RX idle 10mA
RX in alarm 18mA
WINBEAM/S 80
TX min 7.5mA
TX max 19mA
RX idle 11mA
RX in alarm 19mA
WINBEAM/S 105
TX min 7.6mA
TX max 21.5mA
RX idle 12mA
RX in alarm 20mA
WINBEAM/S 130
TX min 7.7mA
TX max 24mA
RX idle 13mA
RX in alarm 21mA
DOORBEAM/S 155
TX min 7.8mA
TX max 26.5mA
RX idle 14mA
RX in alarm 22mA
DOORBEAM/S 180
TX min 8.0mA
TX max 29mA
RX idle 15mA
RX in alarm 23mA
DOORBEAM/S 205
TX min 8.2mA
TX max 31.5mA
RX idle 16mA
RX in alarm 24mA
OUTDOOR
MODELS
HEIGHT
BEAMS
WINBEAM/S 60
F102WINBS60
Item no. BROWN
F102WINBS60BI
Item no. WHITE
F102WINBS60GR
60cm
2
WINBEAM/S 60T
F102WBS60T
F102WBS60BIT
F102WBS60GRT
61 to 79cm
2
WINBEAM/S 80
F102WINBS80
F102WINBS80BI
F102WINBS80GR
80cm
3
WINBEAM/S 80T
F102WBS80T
F102WBS80BIT
F102WBS80GRT
81 to 104cm
3
WINBEAM/S 105
F102WINBS105
F102WINBS105BI
F102WINBS105GR
105cm
4
WINBEAM/S 105T
F102WBS105T
F102WBS105BIT
F102WBS105GRT
106 to 129cm
4
WINBEAM/S 130
F102WINBS130
F102WINBS130BI
F102WINBS130GR
130cm
5
WINBEAM/S 130T
F102WBS130T
F102WBS130BIT
F102WBS130GRT
131 to 154cm
5
DOORBEAM/S 155
F102DOORBS155
F102DOORBS155BI
F102DOORBS155GR
F102DBS155BIT
F102DBS155GRT
F102DOORBS180BI
F102DOORBS180GR
F102DBS180BIT
F102DBS180GRT
DOORBEAM/S 155T F102DBS155T
F102DOORBS180
DOORBEAM/S 180
F102DOORBS200
DOORBEAM/S 205
Compatibility
TP4-20
Item no. GREY MET.
F102DOORBS200BI
F102DOORBS200GR
F102DBS200BIT
F102DBS200GRT
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
155cm
6
156 to 179cm
6
180cm
7
181 to 204cm
7
205cm
8
206 to 300cm
8
TP8-96 VIDEO
TP16-256
OUTDOOR PROTECTION
TP16-512
WINBEAM/S - DOORBEAM/S - Accessories
WINBEAM/DOORBEAM BRACKETS
Bracket for wall mount, allows to fix the
section in intermediate points.
The pack contains 10 brackets.
Item no. F102MOLLEWINB
Synchronism
Z1
1
Z2
2
3
4
5
6
7
8
1
Z3
2
3
4
5
6
7
8
1
Z4
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Security configuration
Barrier security
81
OUTDOOR
RSC® technology
OUTDOOR PROTECTION
BEAMTOWER
The BEAMTOWER barrier is an active infrared perimeter protection, housed in a self supported aluminum
structure. The amazing operational versatility of the BEAMTOWER barrier allows to provide, in addition to
the classic barrier protection, also the protection of large perimeters consisting of two or more sections of
contiguous protection, developed in the configurations of open or closed perimeter.
Dimensions
D. 178mm
L. 153mm
H. 23mm
L
H
D
153
1425
178
153
1970
178
153
2515
178
153
3060
178
D. 400mm
H (see table)
L. 400mm
BEAMTOWER - Technical and functional specifications
Maximum range
150m
RX max. 165mA @ 13V
BEAMTOWER/4
BEAMTOWER/4
4 beams
BEAMTOWER/6
6 beams
BEAMTOWER/8
8 beams
TX max. 197mA @ 13V
RX max. 180mA @ 13V
BEAMTOWER/6
Optical
specifications BEAMTOWER/8 3M
Horizontal orientability
Vertical orientability
8 beams
TX max. 243mA @ 13V
Power
requirements
RX max. 196mA @ 13V
BEAMTOWER/8
180° (+/- 90°)
TX max. 288mA @ 13V
20° (+/- 10°)
RX max. 196mA @ 13V
BEAMTOWER/8 3M
Synchronism
Range (beam power)
Beam power
Programming Anti-masking function
Disqualification function
Alarm detection
Barrier
Installation
Closed perimeter
configurations
Open perimeter
Anti-opening
Self-protections
Anti-striding
Automatic digital
Independent 4
thresholds
5 levels
3 thresholds
32 thresholds
(BEAMTOWER/8)
16 mode
TX max. 288mA @ 13V
Heater (2 units)
Supply voltage
Rated Voltage
Electrical
specifications Mains Power Supply
Buffer battery
10.5V to 14.5V DC
13V DC
230/28V AC (optional)
12V/7Ah
1 mode
BEAMTOWER/4 (LxHxD)
153x1425x178mm
3 mode
BEAMTOWER/6 (LxHxD)
153x1970x178mm
6 mode
BEAMTOWER/8 (LxHxD)
153x2515x178mm
BEAMTOWER/8 3M
(WxHxP)
153x3060x178mm
Mechanical 2 microswitches
Mechanical 6 microswitches
Physical
specifications Wall mounting
Floor mounting
degree
82
max. 770mA @ 28V AC
✓
Optional bracket
-25 C ... +55°C
IP45 upgradable
OUTDOOR
BEAMTOWER
BEAMTOWER/4
Item no. F102BEAMTW/4
Item no. F102BEAMTW/4RX
OUTDOOR PROTECTION
Additional RX column for the realization
of protection with open perimeter of 2,
4, 6 sides.
BEAMTOWER/4 RX
BEAMTOWER/6
4, 6 sides.
BEAMTOWER/6 RX
BEAMTOWER/8
4, 6 sides.
BEAMTOWER/8 RX
BEAMTOWER/83M
Item no. F102BEAMTW/83M
4, 6 sides.
BEAMTOWER/83M RX
Item no. F102BEAMTW/8RX3
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
BEAMTOWER - Accessories
HEATER
TRANSFORMER KIT TA 2/16
Thermostatic heater module for
the compensation of the internal
temperature of the BEAMTOWER
column.
Transformer 220/28V AC 60VA.
For AC power supply of BEAMTOWER
barriers and heaters.
Item no. F102BERISC
Item no. C126TRASTA16/2
TA/BT TRANSFORMER KIT
BRACKET
For AC power supply of BEAMTOWER
barriers and heaters.
Power suitable for extreme climates.
Plate for the fixing to the ground of the
BEAMTOWER column. Material: treated
steel (antioxidant cataphoresis).
Item no. C126TRASTA/BT
Item no. F102BESTAFFA
OPTICAL VIEWFINDER KIT
SHUTTERS
Alignment kit briefcase. Composed
of optical viewfinder and 2 shutters
for the alignment of: DUALBEAM WL,
QUADBEAM and BEAMTOWER.
Adjustable shutters for the alignment
of: DUALBEAM WL, QUADBEAM and
BEAMTOWER.
The package contains 10 items.
Item no. F102KITMIRINO
Item no. F102KITATTENUA
MONITOR 868
Radio tester. The tester allows to test
the alignment of: DUALBEAM WL,
QUADBEAM, BEAMTOWER and
EXPLORER BUS.
Item no. F102MONITOR868
83
OUTDOOR
RSC® technology
OUTDOOR PROTECTION
MODBEAM modules
The MODBEAM modules are the optical provisions of
the column and differentiate into: transmission (TX)
modules and reception (RX) modules. Each module
generates two beams, each of which is composed of
two close parallel beams. The interruption of the beam
is analysed by discriminating the intervention of the
two beams that make it up: a technique that greatly
increases immunity to false alarms.
The programming of the operation is independent
for each beam and, for each of them, it is possible
to choose any one of the multiple options for
discrimination of the alarm provided for by the
programming software.
The alarm discrimination options include: the analysis
of the number of beams interrupted at the same time
or in a delta time, the time of interruption and the
position that the beam occupies in the column.
Orientation of the optical groups
The two optical units that form the MODBEAM module
are independently adjustable on the horizontal and
vertical axis. The adjustment of the protection beam
is carried out via two ring nuts that allow millimetric
movements. The horizontal orientability +/-90°
allows the installation of the column in perimeter
configuration with diametrically opposite aiming of
the two beams (180°). The vertical orientability of the
beams by +/-10° allows to compensate for differences
in height between the columns due to the irregularities
of the ground. The compensation varies as a function
of the distance from 1.7 m up to 10.5 m.
Thermostatically
controlled heater
The column houses, depending on
the model, up to two heaters that
have the task to compensate the
internal temperature in cases where
it is particularly frigid.
The thermostatical control of
the heaters is guaranteed by the
controller unit.
84
Anti-climb-over protection
The top cap of the column interacts
with the tamper board.
The board contains a dual device
capable of detecting opening and
climb-over attempts.
The anchor of the cover to the
structure is swinging and its
calibrated resilience allows to detect
the pressure exerted when stepping
onto the barrier.
Management controller
The controller manages the column
and all the electronic devices that
compose the column are connected
to the controller. The controller of
the RX column is connected to the
control panel or to the expansion
modules of the Speed Plus series
and for the sync signals, to the
corresponding controller of the TX
column. The connections between the
two columns and the control unit are
implemented on two different RS485
buses specialized for the functions.
OUTDOOR
BEAMTOWER
TX
OUTDOOR PROTECTION
Configurations
RX
1
Barrier security
TX
RX
RX
TX
RX
RX
TX
TX
2
TX
3
RX
TX
RX
RX
TX
RX
TX
TX
5
6
TX
TX
4
RX
RX
RX
TX
RX
RX
7
TX
RX
RX
RX
TX
RX
TX
RX
Open perimeter protections
RX
TX
RX
6
TX
4
8
RX
TX
RX
RX
RX
RX
TX
TX
TX
TX
TX
RX
RX
TX
Closed perimeter protections
85
OUTDOOR
RSC® technology
OUTDOOR PROTECTION
EXPLORER BUS
The microwave barrier EXPLORER BUS is the result of the know-how and experience of Tecnoalarm in the
construction of perimetrical protections of sites with a high security risk, such as large industrial areas,
photovoltaic parks, warehouses, airports etc. The barrier featuring microwave detection technology,
projects along the perimeter to be protected a beam of electromagnetic waves, which creates an
insurmountable barrier to intrusion attempts. The barrier, thanks to its technological characteristics, is
highly immune to weather conditions, sources of lighting, and RFI/EMI interferences.
The range EXPLORER BUS is composed of 3 models characterized by different coverage capability.
The channelled operating frequency is programmable, the realization of close protections is exempt from
mutual interference.
L. 310mm
D. 239.5mm
H. 310mm
EXPLORER BUS - Technical and functional specifications
Explorer Bus 600
Detection
Explorer Bus 1200
Max range 120 Meters
Explorer Bus 2200
Max range 220 Meters
Operating frequency
4 transmission channels
Power emitted
Connection
Programming
Self-protections
86
Max range 60 Meters
RS485 serial connection
10.525GHz
(pulse 50%)
5KHz - 6KHz
7KHz - 8KHz
≤500mW
AC power
supply
DC Power
Supply
Sensor Bus
Delay
4 adjustment levels
Sensitivity
5 adjustment levels
Battery
Nominal supply voltage
18V AC
Transmitter max. power
requirement
Receiver max. power
requirement
260mA @ 18V AC
100mA @ 18V AC
Supply voltage
9….15V DC
Rated Voltage
13.8V
requirement
Receiver max. power
requirement
Battery housing
115mA @ 13.8V
45mA @ 13.8V
1x 12V/2.1Ah
Battery charge current
Max. 240mA
-25°C…+55°C
Transmission channel
4 channels
Fault indication
Excludable
degree
IP65
Supervision
Excludable
Dimensions (LxHxD)
310x310x239.5mm
Masking time
4 thresholds
Anti-masking
2 modes
Anti-opening
Mechanical
micro-switches
Mechanical ampoule of
mercury
Anti-removal
Physical
Enclosure
specifications
Weight
Aluminum + ABS
14.4kg
OUTDOOR
EXPLORER BUS
EXPLORER BUS 600
Item no. F102EXPBUS600
OUTDOOR PROTECTION
EXPLORER BUS 1200
EXPLORER BUS 2200
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
EXPLORER BUS - Accessories
POST
TRANSFORMER TA1/N3
Galvanized support post for EXPLORER II
and EXPLORER BUS barriers.
For AC power supply of EXPLORER II
and EXPLORER BUS.
Item no. F102PALI
Item no. F102TRASF.BARR.
BRACKET
MONITOR 868
Galvanized L-shaped bracket for wall
mount of EXPLORER II and
EXPLORER BUS. Length 22cm or 42cm.
Radio tester. The tester allows to test the
alignment of: DUALBEAM WL,
EXPLORER BUS.
Item no. F102STAFFAEXPL
Item no. F102STAFFAEX42
TX
RX
Configurations
Range
60m
120m
RX
TX
TX
RX
220m
TX
RX
Perimeter protection 4 sides
87
RSC® technology
Bus sirens
i
BUS SIRENS
BUS SIRENS
BUS technology, four connection wires for continuous monitoring of its multiple functions.
Various signalling methods slaved to the operating programs of the Tecnoalarm systems.
Greater security, guaranteed by provisions that are capable of protecting the siren from every type of attack.
Total reliability ensured by self-tests that verify full operating efficiency.
Programs
Monodirectional
Bidirectional
Bitone
Non active
Sounding
Monodirectional
Bidi
Bidirectional
ti
l
Bitone
Non active
Sounding
Non active
Sounding
Maximum
Medium high
g
Medium low
Minimum
Non active
Sounding
Non active
Sounding
Programs
Monodirectional
Bidirectional
Bitone
Programmable after
blinking
System
S
t
armed
d
Outdoor siren
Indoor siren
Non active
Sounding
Flash
Sound+Flashing light
Monodirectional
Bidirectional
Bitone
Non active
Sounding
Flash
Non active
Sounding
Flash
Anti foam
Anti-foam
Maximum
Medium high
g
Medium low
Minimum
Non active
Sounding
Flash
Anti perforation
Anti-perforation
Non active
Sounding
Flash
88
INDOOR
SIRTEC BUS
BUS SIRENS FOR INDOOR USE
Bus sirens for indoor use
SIRTEC BUS
Magneto dynamic Bus Siren, self-powered for indoor use. Programmable operation according
to the operating programs related to the siren. Program/s ON/OFF sound signal. Differentiated
management for reporting: alarm, pre-alarm, technical alarm, chime and system alerts. Self
protected from opening and removal. Design by Pininfarina.
Sound power 117dB(A) @ 1m. Antistatic ABS enclosure. Housing for 1 12V-2.1Ah battery.
Dimensions (LxHxD) 290x95x70mm. Colours: white or grey. Complies with EN 50131-4 - Grade 2.
L. 290mm
H. 95mm
D. 70mm
SIRTEC BUS - Technical and functional specifications
Power of main axis at 1m
Sound
specifications
Frequency
10.5... 14.5V DC
2400-3500Hz
Rated Voltage
12V DC
Type of sound
Programmable 3 modes
Alarm
Programmable
Technical alarm
functions
Programmable
Environmental class
Programmable
Protection Degree
Programmable
Signals
Programmable
Chime
Programmable
Supply voltage
✓
Battery voltage
✓
Horn functional
✓
Step-up
Battery charge
Acoustics
Pre-alarm
1.8A
in alarm
Free
System ON/OFF
indication
8mA
Power requirement (idle)
Electrical
specifications Max power requirement
Mechanical
micro-switches
Match with the programs
self-tests
Supply voltage
Pre-alarm/signalling
volume
Self-protections Anti-opening/removal
Automatic
117dB(A)
Siren Bus
-10...+55°C
II
IP31 IK06
2
Safety Degree
Physical
specifications Enclosure
ABS
780gr
Weight
290x95x70mm
Dimensions (LxHxD)
Conformity
Battery housing
1 12V-2.1Ah
Norm
EN 50131-4
SIRTEC BUS
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Magneto dynamic Bus Siren, self-powered for indoor use.
Item no. F105SIRTECBUS (white)
Item no. F105SIRTECBUSGR (metallic grey)
89
OUTDOOR
RSC® technology
BUS SIRENS FOR OUTDOOR USE
Bus sirens for outdoor use
SAEL 2010 BUS
The range SAEL 2010 BUS of Tecnoalarm innovates and reconfigures the concepts of intrinsic safety,
reliability, performance and power requirements of the sirens for outdoors with bus control.
The bus technology, applied to the sirens, allows to manage a large number of functions with just four
connecting wires and especially to exercise on the siren a continuous functional control capable of
ensuring the full efficiency of the device. The sirens SAEL 2010 BUS meet the highest safety requirements,
guaranteed by protection equipment capable of protecting the siren from any tampering attempt.
The use of LED technology for the flashing light allows to provide new signalling functions with dynamic
lighting effects.
L. 211mm
D. 98mm
H. 315mm
SAEL 2010 BUS - Technical and functional specifications
Sound
specifications
103dB(A)
100dB(A)
1400-3600 Hz
Frequency
Pre-alarm/signalling
volume
Type of sound
Technology
Flashing light
Colour
Flashing frequency
Supply voltage
✓
Automatic
Battery voltage
✓
self-tests
Horn functional
✓
Functional flashing light
✓
Programmable 3
modes
Supply voltage
10.5... 14.5V DC
LED
Rated Voltage
12V DC
Power requirement (idle)
Orange
50/minute
Electrical
Max power requirement
specifications in alarm
Power requirements in
signalling
Mechanical
micro-switches
1.8A
70mA
✓
Battery charging limiter
✓
Anti-perforation (only
PRO models)
✓
Siren Bus
Internal or external siren
mode
Match with the programs
✓
Self-protections Anti-foam
Environmental class
Free
System ON/OFF
indication
✓
System status indication
✓
Programmable Alarm
functions
Technical alarm
3 mode
3 mode
Protection Degree
Safety degree SAEL2010
BUS
Safety degree
SAEL2010PRO BUS
Physical
-40...+50°C
IIIA
IP43 IK08
3
4
ASA or Aluminum
3 mode
Weight SAEL2010 BUS
ASA 2kg - Al 2.7kg
Signals
3 mode
Weight SAEL2010PRO
BUS
Al 3.1kg
Chime
3 mode
Dimensions (LxHxD)
Pre-alarm
Post-alarm flashing
Programmable
Conformity
90
12mA
211x315x98mm
Battery housing
1 12V-2.1Ah
Norm
EN 50131-4
OUTDOOR
SAEL 2010 BUS
BUS SIRENS FOR OUTDOOR USE
SAEL 2010 BUS
Plastic cover
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Self-powered siren for outdoor use. Self-protected from: opening, removal, and foam. Multipurpose LED flashing lights. Automatic self-test RS485 bus connection. Sound power 117dB(A)
at 1m. Design by Pininfarina. Base case in ABS, cover in antistatic ASA. Housing for 1 12V-2.1Ah
battery. Dimensions (LxHxD) 211x315x98mm. Complies with EN 50131-4 Grade 3.
Environmental Class IIIA.
Item no. F105S2010BUSBI (Plastic cover - ASA. White)
Item no. F105S2010BUSGR (Plastic cover - ASA. Metallic grey)
SAEL 2010 BUS
Aluminum cover
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Self-powered siren for outdoor use. Self-protected from: opening, removal, and foam. Multipurpose LED flashing lights. Automatic self-test RS485 bus connection. Sound power 117dB(A) at
1m. Design by Pininfarina. Base enclosure in ABS, cover in aluminum. Housing for 1 12V-2.1Ah
battery. Dimensions (LxHxD) 211x315x98mm. Complies with EN 50131-4 Grade 3.
Environmental Class IIIA.
Item no. F105S2010BUSAL (Cover in aluminum - Grey)
Item no. F105S2010BUSCR (Cover in aluminum - Chrome)
SAEL 2010PRO BUS
Aluminum cover
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Self-powered siren for outdoor use. Self-protected from: opening, removal, foam, perforation.
Multi-purpose LED flashing lights. Automatic self-test RS485 bus connection.
Sound power 117dB(A) at 1m. Design by Pininfarina. Base enclosure in ABS, cover in aluminum.
Housing for 1 12V-2.1Ah battery. Dimensions (LxHxD) 211x315x98mm.
Complies with EN 50131-4 Grade 4. Environmental Class IIIA.
Item no. F105S2010PBUSAL (Cover in aluminum - Grey)
Item no. F105S2010PBUSCR (Cover in aluminum - Chrome)
91
WIRELESS
WIRELESS
The range of wireless devices of Tecnoalarm consists of receivers and transceivers,
alarm and control mono and bi-directional devices, specialized detectors for volumetric
and perimeter protection of internal and external areas.
All the peripheral devices, detectors, control and alarm devices are powered by lithium
batteries. The smart and efficient management of energy consumptions ensures
maximum operational autonomy. The operation in dual bandwidth 433MHz and 868MHz,
with channelled frequencies, ensures a high immunity from interferences.
The use of a unique communication protocol, based on a sophisticated 32-bit proprietary
encryption algorithm, ensures maximum safety and high reliability of communication.
The Tecnoalarm systems manage the self-protection of their wireless devices with
the functions: Supervision (verification of the presence of devices) and Anti-jamming
(protection from attempts of obscuration in radiofrequency).
The thresholds of intervention and reporting of the two functions are programmable
and may exert so high controls as to allow the use of wireless systems even when the
required security levels are medium-high.
Radio coverage
The radio coverage is guaranteed by the possibility to install in the secure site
multiple radio transceiver modules connected on the Serial Bus.
The connection on the Serial Bus allows to freely position the radio devices,
choosing for them the most suitable position to ensure the best reception and
transmission of radio signals.
Self-protection
The Tecnoalarm systems, by means of the control of the survival signal,
monitor the presence and operation of their radio devices.
The evolution in the signal/noise ratio is constantly monitored in order to
detect and report any attempts of masking the radio signal.
RF Monitor
The evolution of the signal/noise ratio is constantly monitored. The detected
data translated into graphic form are available with the diagnostic tool "RF
monitor" of the Tecnoalarm software, selecting the receiving device and the
frequency band, it is possible to detect the presence of interferences that can
disrupt the frequencies used. On the basis of the processed data, the tool
indicates and classifies the quality of the radio signal as good, critical or poor.
92
93
INDOOR
Wireless
Transmitter-Receivers
RTX200/433868
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
WIRELESS
Bi-directional radio transceiver, dual operating frequency 433/868 MHz. Connection on the Serial Bus
of the compatible systems. Manages mono and bi-directional Tecnoalarm radio devices.
The amount of managed devices depends on the system used. Self protected from opening and
removal. Elegant design by Pininfarina. ABS enclosure. Dimensions (LxHxD) 270x156x68mm. White.
Item no. F102RTX200
Receivers
RX300/433868
Compatibility
TP4-20
TP4-20 GSM
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Radio receiver, dual operating frequency 433/868 MHz. Connection on the Serial Bus of the
compatible systems. Manages mono Tecnoalarm radio devices. The amount of managed devices
depends on the system used. Self protected from opening and removal. Elegant design by Pininfarina.
ABS enclosure. Dimensions (LxHxD) 270x156x68mm. White.
Item no. F102RX300
RX UNIVERSAL
Universal radio Receiver composed of a receiving unit "RX400" and a display unit
"UNI CONTROL CONSOLE" with 32 LEDS to signal the general states. Learning and management
of 22 WL detectors and 22 radiocontrols, 3 alarm relay outputs, 1 control output, which can be
interfaced to control units with conventional inputs of any type. Dual operating frequency 433/868 MHz.
The receiver RX UNIVERSAL can manage an additional reception unit RX400.
RX UNIVERSAL - Item no. F102RXUNIV
RX 400/433868 - Item no. F102RX400 (Additional radio receiver)
Control units
LCD300 WL
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Two way radio management console, dual frequency 433/868 MHz. Backlighted LCD display 2x16
Program Management max. 8. Additional Input for NC contact. Self protected from opening and
removal. Lithium power supply battery supplied. Surface Mount. Elegant design by Pininfarina.
Item no. F102LCD300WL
TX240
TX240-3/433 3 key radio control with programmable functions. Frequency 433MHz. Lithium battery.
TX240-3/868 3 key radio control with programmable functions Frequency 868MHz. Lithium battery.
TX240-3/433
Item no. F102TX240-3/433
TX240-3/868
Item no. F102TX240-3/868
94
INDOOR
Transmitters
TX310
TX310 M
Radio transmitter for indoor use, 2 inputs, dual transmission code, double transmission
frequency 433/868 MHz. Additional input for external device: contact, rope contact or inertial.
Self protected from opening and removal. Lithium power supply battery supplied. Surface Mount.
Antistatic ABS enclosure. Dimensions (LxHxD) 114.5x38.5x30mm.
White or brown.
WIRELESS
Item no. F102TX310 (white)
Item no. F102TX310/M (brown)
TX310 - TX310M - Accessories
BATTERY TESTER
Tester to check the charge level of the
TX310 transmitter battery.
Item no. F102BATTERYTEST
TWINBAND WL
Volumetric detectors for indoor use, 433/868 MHz dual transmission radio frequency.
Range and coverage pattern differentiated on the basis of the protection models: volumetric, long
range, curtain, volumetric for animals (see illustration of icons).
Lithium power supply battery supplied.
TWINBAND WL/V
Item no. F102TWINBAND/V
TWINBAND WL/C
Item no. F102TWINBAND/C
TWINBAND WL/T
Item no. F102TWINBAND/T
TWINBAND WL/PET
Item no. F102TWINBAND/PE
TWINBAND WL - Accessories
SNODO 2000
orientation, +/-45° horizontal -15°
vertical.
95
OUTDOOR
Wireless
TRIRED WL
Triple passive infrared radio, dual transmission frequency 433/868 MHz. Designed for outdoor use, resistant to
weathering and extreme weather conditions, suitable for the protection of perimeter areas with depth of field
of 15 or 30 meters. Equipped with ample opportunities for orientation, it offers solutions for the protection of
doors, windows, balconies and areas close to homes. AND detection logic.
Anti-masking protection. Lithium power supply battery supplied.
ABS enclosure. Design by Pininfarina.
WIRELESS
TRIRED WL
Item no. F102TRIREDWL
TRIRED WL/15
Item no. F102TRIREDWL15
TRIRED WL - Volumetric projection at 30m
TRIRED WL/15 - Volumetric projection at 15m
96
OUTDOOR
DUALBEAM
WL
Active radio infrared barrier, dual transmission frequency 433/868 MHz. DUALBEAM/WL provides an effective
perimeter protection. Equipped with 2 protection beams, can cover a range of 80 meters.
Lithium power supply battery supplied. ABS enclosure.
DUALBEAM
HE WL
WIRELESS
Item no. F102DUALBEAMWL
Active infrared wireless barrier, with radio and optical characteristics identical to the model DUALBEAM WL.
The barrier DUALBEAM HE WL is equipped with a heater module and Ni-Cd rechargeable batteries.
The power supply of the product must be provided by an external source. The power required is 18V AC 18W
or 24V DC 600mA. Power data refer to a specific device, to supply the pair TX+RX it is necessary to double the
current values.
Item no. F102DUALBEAMWLH
DUALBEAM WL - Accessories
POST
POST MOUNTING KIT
Post in galvanized sheet metal for the
support of DUALBEAM and QUADBEAM
barriers.
Height 1,500 mm. Diameter 50 mm.
Post-mounting kit (50mm diameter)
for barriers DUALBEAM WL and
QUADBEAM.
The kit includes the material necessary
to fasten a pair of barriers (RX+TX).
Item no. F102PALOBEAM
Item no. F102KITPALOBEAM
MONITOR 868
SHUTTERS
Radio tester. The tester allows to test
EXPLORER BUS.
Adjustable shutters for the alignment of:
DUALBEAM WL, QUADBEAM and
BEAMTOWER.
Alignment kit briefcase. Composed
of optical viewfinder and 2 shutters
for the alignment of: DUALBEAM WL,
Siren for outdoor use
SAEL 2000 WL
Plastic cover (ASA) White
Compatibility
TP8-28
TP8-28 GSM
TP8-88
TP8-96 VIDEO
TP16-256
TP16-512
Two-way radio siren, dual frequency 433/868 MHz. Self-powered for outdoor use.
Self protected from opening and removal. Xenon flashing light.
Sound power 117dB(A) at 1m. Lithium power supply battery supplied. Design by Pininfarina.
Base ABS enclosure, ASA cover. White. Dimensions (LxHxD) 211x315x98mm.
Item no. F105SAEL2000WL (White)
97
DETECTORS
DETECTORS
FOR INDOOR USE - FOR OUTDOOR USE
98
INDOOR
Detectors for indoor use
The range of detectors for indoor use is composed of two types of product:
infrared and dual technology, different models for different types of range,
some of which with anti-masking protection.
OUTDOOR
Tecnoalarm has achieved over the years a great deal of experience in the design
and production of intrusion detectors.
The knowledge and the mastery of the best detection technologies has produced
over the years a wide range of detectors, which are capable of delivering the best
solutions for every type of protection, from the smallest apartment,
up to the most complex protections of large outdoor areas.
Detectors for outdoor use
Several different detectors for outdoor use, for the protection of the perimeter
behind the building use for the detection the technology of the active and
passive infrared. Short and long range microwave barriers, able to monitor
and protect the perimeter of large outdoor areas.
99
INDOOR
Detectors
VOLUMETRIC DETECTORS
The TWINTEC detectors operate according to the AND and WALK detection logics, which can be combined with
the technology RDV®, the automatic functions, Self test and the temperature compensation complete a set of
excellent features. The model TWINTEC MASK 18 is provided with anti-masking security, to which, in case of
necessity, is subjected the programmed detection logic which automatically becomes OR.
TWINTEC
TWINTEC 18/V
The TWINTEC 18 detector complies with the standard EN 50131-1-2-4 - Grade 2
Item no. F102TWIN18/V (Frequency 10.525GHz - Frequency homologated for Italy)
Item no. F102TW18/V-99 (Frequency 9.9GHz - Frequency homologated for foreign countries)
Item no. F102TW18/V-93 (Frequency 9.35GHz - Frequency homologated for foreign countries)
TWINTEC MASK 18/V
The detector TWINTEC MASK 18 complies with the standard EN 50131-1-2-4 - Grade 3
Item no. F102TWINM18/V (Frequency 10.525GHz - Frequency homologated for Italy)
Item no. F102TWM18/V-99 (Frequency 9.9GHz - Frequency homologated for foreign countries)
Item no. F102TWM18/V-93 (Frequency 9.35GHz - Frequency homologated for foreign countries)
For physical dimensions and graph of the coverage diagrams, refer to the information related to TWINTEC BUS (page 76-77)
TWINTEC - Technical and functional specifications
Microwave (MW)
Sensitivity MW
Detection
IR sensitive areas
IR detection plan
4
AND
OR
WALK
RDV®
WALK RDV®
Opening angle
IR
MW
Alarm
Outputs
Tamper
Mask
Inputs
Adjustable 3...18
± 20%
29
Max. capacity
Detection
logics
10.525GHz*
18m
Self-protections
AND (IR+MW) + WALK
(MW+MW)
AND (IR+MW)
MW+MW
Auto-test
Temperature
compensation
Automatic
Power supply
Supply voltage
9V DC...15V DC
Power
requirements
Twintec
Connection
NC contact
Electronic relay
NC contact
Micro-switch
NC contact**
Electronic relay
Standby
Block input
Sync
Synch input
Twintec Mask
Automatic
Idle 17mA @ 12V DC
Alarm 25mA @ 12V DC
Idle 27mA @ 12V DC
Alarm 30mA @ 12V DC
Programmable
NC EOL DEOL
-10°C...+55°C
II
Environmental class
degree
108°
72° horiz. - 36° vert.
Anti-masking
Mechanical
micro-switches
Electronic
programmable*
Functions
IR+MW
IR or MW**
Physical
Safety Degree
specifications
IP30-IK02
Twintec (Grade 2)
Twintec Mask (Grade 3)
Enclosure
Antistatic ABS
Dimensions (LxHxD)
68x118x51mm
160g
Weight
* Product also available with 9.9GHz and 9.35GHz frequencies
** Only available on Twintec Mask
Operational frequencies in accordance with the national provisions indicated by CEPT T/R 70-03.
The TWINTEC detectors operating on the frequencies indicated can be installed in the countries indicated in the respective tables.
100
10.525GHz
9.9GHz
9.35GHz
BE CY DK GR HU IE IT LV LT
LU MT NL PL RO SI ES SE IS
BG LI NO PT CH BA HR
AT BE CY CZ DK FI FR GR HR
HU IE IT IS LI LT LV MT NL
PL PT RO SI TR BG LU NO CH
AT BE CY CZ DE DK HU HR IE
LI LT LV MT NL PL PT RO SI
SK TR BG EE GR IS LU NO CH
INDOOR
IR2005 volumetric detectors for interior use. Sensitivity adjustment and pulse counter. Range and coverage
pattern differentiated on the basis of the protection models: volumetric, long range, curtain, volumetric
for animals (see illustration of icons). IR MASK 05/V volumetric detector for interior use with anti-masking
function.
IR2005
IR MASK 05
IR2005/V
Item no. F102IR2005/V
IR2005/C
Item no. F102IR2005/C
IR2005/T
Item no. F102IR2005/T
IR2005/PET
Item no. F102IR2005/PET
IR MASK 05
Item no. F102IRMSK05/V
IR2005 - IR MASK 05 - Technical and functional specifications
Detection
Outputs
Inputs
IR sensitive areas
22
IR detection plan
4
Power supply
Opening angle
100°
Maximum range
14m
Tamper
NC contact
Electronic relay
Mechanical
micro-switches
Standby
Block input
Alarm
Self-Protection Anti-opening/removal
Power
requirements
Connection
Rated Voltage
12V DC
Supply voltage
10.5V DC...14.5V DC
Drain (idle)
alarm
5mA @ 12V DC
10mA @ 12V DC
Programmable NC-Balanced-Dual balancing
Physical
+5°C...+40°C
Antistatic ABS
Mechanical
micro-switches
Coverage diagrams
101
INDOOR
Detectors
OMNISPACE
Infrared volumetric detector for interior use. Ceiling mounting at a maximum height of 8m.
Alarm memory. Pulse counter.
Item no. F102OMNISPACE
OMNISPACE - Technical and functional specifications
Detection
2.1m...5m
Mounting height
Coverage at a height
of 3m
IR sensitive areas
Range 10m
40
360°
Opening angle
Outputs
Inputs
Tamper
NC contact
Electronic relay
NC contact
Micro-switch
Standby
Block input
Alarm
Power supply
12V DC
Rated Voltage
Supply voltages
10V DC...14V DC
Drain (idle)
alarm
13mA @ 12V DC
Physical
+5°C...+40°C
Power
requirements
18mA @ 12V DC
Antistatic ABS
Mechanical
micro-switches
Self-protection Anti-opening
Volumetric detectors for interior use. Pulse counter. Range and coverage pattern differentiated on
the basis of the protection models: volumetric, long range, curtain (see illustration of icons).
All comply with CEI- level I.
IR2000
IR2000/V
Item no. F102IR2000/V
IR2000/C
Item no. F102IR2000/C
IR2000/T
Item no. F102IR2000/T
IR2000 - IR 2000/V - Technical and functional specifications
22
IR sensitive areas
Detection
Outputs
Inputs
4
IR detection plan
Opening angle
100°
Maximum range
14m
Tamper
NC contact
Electronic relay
NC contact
Micro-switch
Standby
Block input
Alarm
Power supply
12V DC
Rated Voltage
Supply voltages
10.5V DC...14.5V DC
Drain (idle)
alarm
5.5mA @ 12V DC
Physical
+5°C...+40°C
Power
requirements
13mA @ 12V DC
Antistatic ABS
Mechanical
micro-switches
TWINTEC - IR2005 - IR MASK 05 - IR2000 - A
Accessories
i
102
KEY
SNODO 2000
Tool for the opening of the detectors of
series IR2000.
orientation, +/-45° Horiz. -15° vert.
TWINTEC 18 and TWINTEC MASK 18
matched to the brachet maintain their
characteristics of certification unchanged.
Item no. F102CHIAVEIR
OUTDOOR
OUTDOOR PROTECTION
TRIRED
Triple passive infrared. Designed for outdoor use, resistant to weathering and extreme weather
conditions, suitable for the protection of perimeter areas with depth of field of up to 30 meters.
Equipped with ample opportunities for orientation, it offers solutions for the protection of doors,
windows, balconies and areas close to homes.
AND detection logic (8 modes), 3 independent alarm counters.
Anti-masking protection. ABS enclosure. Design by Pininfarina.
Item no. F102TRIRED
For physical dimensions and graph of the coverage diagrams, refer to the information related to TRIRED BUS (page 78-79)
TRIRED - Technical and functional specifications
Sensitive elements
Detection
Detection beams
Detection plans
Range
Detection
logics
AND of 2 beams
(indefinite)
AND of 2 beams
(definite)
AND of 3 beams
(indefinite)
AND of 3 beams
(priority)
Count logic
1 mode
Independent for the 3
beams
Fail (fault)
NC contact
Electronic relay
NC contact
Electronic relay
NC contact
Electronic relay
Normally +12V Electric
Connection
Automatic independent
on the 3 beams
Automatic
Rated Voltage
12V DC
Supply voltage
10V DC...14.5V DC
Idle
27mA @ 12V DC
In alarm (max.)
25mA @ 12V DC
Programmable
NC - Balanced
Dual balance
-20°C...+65°C
3 mode
Mask
Power
requirements
Block input
Temperature
compensation
Power supply
3 mode
1 mode
Standby
Auto-test
Functions
Adjustable max 30m
Anti-masking sensitivity
Self-Protection
Outputs
3 on the same axis
Anti-masking
Alarm
Inputs
3 with curtain effect
Mechanical
micro-switches
Independent electronic
on the 3 beams
Selfprotections
3 IR sensors dual
element
Environmental class
degree
Physical
Orientability
specifications
Enclosure
Dimensions (LxHxD)
Weight
II
IP55-IK04
Horizontal +/-90° Vertical +/-10°
UV resistant
antistatic ABS
400x82x260mm
1.2kg
103
OUTDOOR
Detectors
OUTDOOR PROTECTION
WINBEAM/AL
DOORBEAM/AL
Designed for peripheral protection in protected internal and external areas of entrances of apartments,
houses and buildings in general. Especially robust structure. They are distinguished by superior
characteristics, operational flexibility, and ease of installation. Stylish and functional design that allows
seamless integration in every architectural context.
WINBEAM/AL
Item no. F102WINBEAM/A
DOORBEAM/AL
Item no. F102DOORBEAM/A
The barriers can be ordered with customized heights.
It is possible to request heights from 535mm to
2.888mm.
CUSTOMIZED SIZE
Item no. F102BARSUMISURA
WINBEAM/AL - DOORBEAM/AL - Technical features and functions
Detection
Outputs
WINBEAM/AL range
6m
DOORBEAM/AL range
6m
Power supply
WINBEAM/AL beams
4
DOORBEAM/AL beams
8
Alarm
Self-protection Cable cutting
NC contact
Electronic relay
Supply voltages
Power
requirements
12V DC
Rated Voltage
WINBEAM/AL
DOORBEAM/AL
Physical
9.5V DC...14.5V DC
TX 18mA @ 12V DC
RX 13mA @ 12V DC
TX 30mA @ 12V DC
RX 14mA @ 12V DC
-10°C...+40°C
Aluminum
WINBEAM/AL - DOORBEAM/AL - Accessories
WINBEAM/DOORBEAM BRACKETS
Bracket for wall mount, allows to fix the
section in intermediate points.
The pack contains 10 brackets.
Item no. F102MOLLEWINB
Security configuration
Barrier security
104
OUTDOOR
QUADBEAM 100
QUADBEAM 200
The active infrared barrier QUADBEAM provides an effective perimeter protection.
Equipped with 4 protection beams, can cover on the basis of the model used a range of 100 or
200 meters. Equipped with a disqualification circuit.
OUTDOOR PROTECTION
QUADBEAM 100
Item no. F102QUADBEAM100
QUADBEAM 200
Item no. F102QUADBEAM200
QUADBEAM 100 - QUADBEAM 200 - Technical and functional specifications
Detection
Range of QUADBEAM
100
Range of QUADBEAM
200
100m
200m
4
Number of beams
Adjustable
Intervention time
Alarm
Outputs
Fault
Tamper
NC contact
Electronic relay
NC contact
Electronic relay
NC contact
Micro-switch
Power supply
TX power
requirements
RX power
requirements
Mechanical
micro-switches
12V DC
Rated Voltage
Supply voltages
10.5V DC...14.5V DC
Drain (idle)
43mA @ 12V DC
Drain (idle)
18mA @ 12V DC
Physical
-5°C...+55°C
Antistatic ABS
QUADBEAM 100 - QUADBEAM 200 - Accessories
HEATERS
TRANSFORMER TA1/N3
Thermostatic heater module for
the compensation of the internal
temperature of the QUADBEAM barrier.
For powering the heaters of the
QUADBEAM barriers and powering
EXPLORER II and EXPLORER BUS.
Item no. F102QUADBRISC
POST
POST MOUNTING KIT
Pole in galvanized sheet metal for the
support of DUALBEAM and QUADBEAM
barriers.
Height 1,500 mm. Diameter 50 mm.
Post-mounting kit (50mm diameter) for
barriers DUALBEAM WL and QUADBEAM.
The kit includes the material necessary to
fasten a pair of barriers (RX+TX).
Item no. F102PALOBEAM
Item no. F102KITPALOBEAM
SHUTTERS
Alignment kit case, composed of
optical viewfinder and 2 shutters for
Adjustable shutters for the alignment
of: DUALBEAM WL, QUADBEAM and
BEAMTOWER.
MONITOR 868
Radio tester. The tester allows to
test the alignment of: DUALBEAM
WL, QUADBEAM, BEAMTOWER and
EXPLORER BUS.
105
OUTDOOR
Detectors
OUTDOOR PROTECTION
MINIEXPLORER
MINIEXPLORER, the solution for the perimeter protection of high risk sites.
The barrier is highly immune to weather conditions, sources of lighting and RFI/EMI interferences.
The channelled operating frequency is programmable, the realization of close protections is
exempt from mutual interference.
Item no. F102MINIEXPL (White)
Item no. F102MINIEXPL/V (Green)
MINIEXPLORER - Technical and functional specifications
40 meters
Max range
Detection
10.525GHz
(pulse 50%)
Operating frequency
≤500mW
Power emitted
Inputs
Block input
Standby
NC contact
Electronic relay
NC contact
Micro-switch
NC contact
Electronic relay
Alarm
Outputs
5.5KHz - 7.8KHz
Self-Protection
Fault
Mechanical
micro-switches
Self-protections Anti-opening
10….14.5VDC
Supply voltage
Rated Voltage
Electrical
specifications Transmitter max. power
requirement
Receiver max. power
requirement
13.8V
55mA @ 13.8V
40mA @ 13.8V
-25°C…+55°C
degree
Physical
Enclosure
specifications
IP65
Antistatic ABS
Dimensions (LxHxD)
173x216x131mm
1.90 kg
Weight
MINIEXPLORER - Accessories
POST
BRACKET
Galvanized support post for
MINEXPLORER barrier. Height 120cm.
Galvanized "L" bracket for wall mount for
MINEXPLORER.
Length 25cm or 35cm.
Item no. F102STAFFA25
Item no. F102PALO120
Item no. F102STAFFA35
Security configuration of detectors for outdoor use - MINIEXPLORER / EXPLORER II
TX
RX
RX
TX
TX
RX
TX
RX
Perimeter protection 4 sides
106
OUTDOOR
EXPLORER II
OUTDOOR PROTECTION
EXPLORER II, the best solution for the perimeter protection of high risk sites.
The barrier is highly immune to weather conditions, sources of lighting and RFI/EMI interferences.
The range is composed of 3 models with different coverage capability.
The channelled operating frequency is programmable, the realization of close protections is exempt
from mutual interference.
EXPLORER II 0600
Item no. F102BAR.0600
EXPLORER II 1200
EXPLORER II 1800
EXPLORER II - Technical and functional specifications
Max. capacity
60 meters
Max. capacity
120 meters
Max. capacity
180 meters
10.525GHz
(pulse 50%)
Explorer II 0600
Explorer II 1200
Detection
Explorer II 1800
Operating frequency
5.5KHz - 7.8KHz
≤500mW
Power emitted
Inputs
Outputs
Self-protection
Fault
Selfprotections
Anti-opening
Anti-displacement
DC Power
Supply
Block input
Standby
Alarm
Nominal supply voltage
AC power
supply
NC contact
Electronic relay
NC contact
Micro-switch
NC contact
Electronic relay
Mechanical
micro-switches
Mechanical
ampoule of mercury
Battery
requirement
Receiver max. power
requirement
18VAC
260mA @ 18VAC
100mA @ 18VAC
Supply voltage
9….15VDC
Rated Voltage
13.8V
requirement
Receiver max. power
requirement
Battery housing
110mA @ 13.8V
60mA @ 13.8V
1x 12V/2.1Ah
Battery charge current
Max. 240mA
-25°C…+55°C
degree
Physical
Enclosure
specifications
IP65
Aluminum + ABS
Dimensions (LxHxD)
310x310x239.5mm
14.2kg
Weight
EXPLORER II - Accessories
POST
TRANSFORMER TA1/N3
Galvanized support post for EXPLORER II
and EXPLORER BUS barriers.
For AC power supply of EXPLORER II
and EXPLORER BUS.
Item no. F102PALI
BRACKET
TECNOTESTER
Galvanized L-shaped bracket for wall
mount of EXPLORER and EXPLORER BUS.
Length 22cm or 42cm.
Tester to check the level of optical
alignment of the barrier EXPLORER.
Item no. F102STAFFAEXPL
Item no. F102STAFFAEX42
Item no. F102TESTEREXPL
107
SIRENS
SIRENS
FOR INDOOR USE - FOR OUTDOOR USE
OUTDOOR
INDOOR
The acoustic warning devices of Tecnoalarm are designed to satisfy the most
sophisticated security requirements, in compliance with the performance
demanded by current regulations.
The sirens of Tecnoalarm express the highest levels of intrinsic safety and
functionality, in the context of the warning devices for internal and external use.
The Pininfarina design, elegant and functional, provides a pleasant integration in
every architectural context.
108
Between the sirens for indoor use of Tecnoalarm, SIRTEC represents the
flagship model. Its characteristics are remarkable, high alarm power (117dB)
guaranteed by the use of a magneto dynamic speaker, supported by a 2Ah
lead acid battery for self-powering, step-up battery charge circuit,
able to always ensure recharge, possibility to choose the alarm tone,
maximum time of activation controlled by a programmable internal timer.
Top range distinctive features, which establish new reference levels for this
family of devices.
With the range of sirens SAEL 2010, Tecnoalarm innovates and reconfigures
the concepts of safety, reliability, performance and power consumption of the
sirens for outdoor use. Greater security, thanks to features that are capable of
protecting the siren from every type of attack. Total reliability: guaranteed by
automatic self-test function that ensures the maintenance of the full operating
efficiency. Maximum interactivity: through the indications of the flashing light,
it is possible to obtain dynamic information about the operative status of the
device. Reduction of energy consumption: with the adoption of a new flashing
light with LED technology.
109
INDOOR
Sirens
SIRENS FOR INDOOR USE
SIRTEC
Plastic cover (ABS)
Colours: white or grey
Magneto-dynamic siren, self-powered for indoor use. Self-protected from: opening, removal.
Programmable 2 mode sound. Programmable timer (maximum time of operation).
Design by Pininfarina. Sound power 117dB(A) @ 1m. Antistatic ABS enclosure.
Colours: white or grey. Complies with EN 50131-4 - Grade 2.
Item no. F105SIRTEC (White)
Item no. F105SIRTECGR (Metallic grey)
SIREL 2000B
Piezoelectric siren, for indoor use. Self-protected from: opening, removal.
Sound intensity differentiated for alarm and warning. Design by Pininfarina.
Item no. F105SIREL2000
SIREL 2000L
Piezoelectric siren, for indoor use. Self-protected from: opening, removal. LED flashing light.
Design by Pininfarina. Antistatic ABS enclosure.
Item no. F105SIREL2000L
SIREL 2000F
Piezoelectric siren, for indoor use. Self-protected from: opening, removal.
Xenon flashing light. Design by Pininfarina. Antistatic ABS enclosure.
Item no. F105SIREL2000F
SIREL 2000AUTO
Piezoelectric siren, self-powered for indoor use. Self-protected from: opening, removal.
Housing for 1 alkaline 9V battery. Design by Pininfarina. Antistatic ABS enclosure.
Item no. F105SIREL2000AU
110
OUTDOOR
SIRENS FOR OUTDOOR USE
SAEL 2010 LED
Plastic cover
Self-powered siren for outdoor use. Self-protected from: opening, removal, and foam.
Multi-purpose LED flashing lights. Automatic self-test Design by Pininfarina.
Sound power 117dB(A) at 1m. Base case in ABS, cover in antistatic ASA.
Complies with EN 50131-4 - Grade 3. Environmental Class IIIA.
Item no. F105SAEL2010LBI (Plastic cover - ASA - White
Item no. F105SAEL2010LGR (Plastic cover - ASA - Metallic grey)
SAEL 2010 LED
Aluminum cover
Self-powered siren for outdoor use. Self-protected from: opening, removal, and foam.
Base enclosure in ABS, cover in aluminum. Housing for 1 12V-2.1Ah battery.
Sound power 117dB(A) at 1m. Dimensions (LxHxD) 211x315x98mm.
Item no. F105SAEL2010LAL (Cover in aluminum - Grey)
Item no. F105SAEL2010LCR (Cover in aluminum - Chrome)
SAEL 2010PRO LED
Aluminum cover
Self-powered siren for outdoor use. Self-protected from: opening, removal, foam, perforation.
Sound power 117dB(A) at 1m. Base enclosure in ABS, cover in aluminum.
Item no. F105S2010PROL (Cover in aluminum - Grey)
111
COMMUNICATORS
TELEPHONE
The great flexibility of management of phone alarms of the Tecnoalarm system
allows to manage an additional TECNOCELL-PRO PL telephone transmitter,
its use strengthens the means of alarm notification and raises the level of security.
The TECNOCELL-PRO PL telephone transmitter is connected on the Serial Bus
serial line. This link allows to decentralize the location of the device,
to choose the most suitable position to visually hide it and ensure the best coverage
of the GSM signal.
Communicators
The Tecnoalarm systems have eight communicators, and each communicator
is paired with a communication protocol that defines the phone carrier used to
communicate.
Carriers
Generally the Tecnoalarm systems have a primary carrier, a secondary carrier
is an Ethernet carrier. In almost all cases, the secondary carrier of the systems
is the TECNOCELL-PRO PL transmitter.
Protocols
The protocol is the transmission mode of the message. Each protocol has
its own rules of operation, rules that relate to the way of communicating the
message of alarm so that it can be understood. With what do I send it?
Or, what communication carrier do I use to forward alarms to destination.
How do I say it? Or, which type of language do I use so that the recipient
understands the alarms. TECNOCELL-PRO PL is used for the transmission of
the "Secondary (GSM EXT)" and of the "Backup" protocols.
A secondary protocol makes calls only using the TECNOCELL-PRO PL
transmitter. A backup protocol uses the TECNOCELL-PRO PL transmitter
only as a second resource in the event that the primary carrier is unable to
forward the message to the recipient.
COMMUNICATORS
112
COMMUNICATION PROTOCOLS
113
TELEPHONE COMMUNICATORS
m
m
3
.9
D
H. 285mm
L. 350mm
TECNOCELL-PRO PL
Compatibility
TP4-20
TP8-28
TP8-28 GSM
TP8-96 VIDEO
TP16-256
TP16-512
Additional GSM communicator. The communicator, which can be connected on compatible systems,
performs the task of secondary transmission carrier, can transmit the protocols of secondary and
backup type managed by the system. Internal receiving antenna. RS485 bus connection.
Housing for 1 12V-7Ah battery. Antistatic ABS enclosure. Design by Pininfarina.
Item no. F104TECNOC/PPL
TECNOCELL-PRO PL - Technical and functional specifications
Classification
GSM mobile phone transmitter
Carrier
Secondary - GSM EXT
Connection
Self-protections
Power
requirements
RS485 Serial Bus
Mechanical
micro-switches
Rated Voltage
12V DC
Supply voltage
9V DC...15V DC
Power supply
Drain (idle)
Power requirements in alarm
150mA @ 12V DC
+5°C .... + 40°C
Battery housing
Physical
specifications
50mA at 12V DC
1 (12V-7Ah)
ABS
Enclosure
Dimensions (LxHxD)
350x285x93mm
1.1kg
Weight
Phone transmitters - Accessories
114
VOICE TECNOCELL-PRO
Voice message module for
TECNOCELL-PRO PL.
4mt extension of the antenna cable for
the GSM/GPRS module.
Item no. F104VOICE
TELEPHONE COMMUNICATORS
TECNOCELL-PRO PL / SYSTEMS - Management of communication protocols
TP4-20
Transmission
of
TP8-28
Secondary
protocol
Backup
protocol
Secondary
protocol
Backup
protocol
Secondary
protocol
Backup
protocol
8
8
14
14
14
14
1
1
1
1
1
2
2
-
2
-
-
-
1
1
1
1
1
1
1
-
1
-
1
-
TP8-96 VIDEO
Transmission
of
TP8-28 GSM
TP16-256
TP16-512
Secondary
protocol
Backup
protocol
Secondary
protocol
Backup
protocol
Emergency Only
14
14
14
14
1 - Transmitted only if equipped with
optional voice card
1
1
1
1
-
-
-
2
-
1
1
1
1
1
-
1
-
1
-
-
115
POWER SUPPLIES
POWER SUPPLIES
In electronic equipment the role of power supply devices is of great
importance. In the field of security systems this importance becomes huge,
the choice and the correct sizing of the devices of primary power
(power supply) and secondary power (backup batteries), determine in large
measure the stability and reliability performance of the security systems.
In the design of power supplies and power supply units,
Tecnoalarm takes particular care in order to pursue the requirements and
required characteristics of power, efficiency and reliability, in the absolute
respect of the characteristics of electrical safety.
Supply units
The new TAPS-8 power supply unit complies with the regulations that govern
the design and construction of professional power supply units for the safety
industry. Realized with metal cabinet that allows to house batteries that can
ensure the capacity required by the rules.
The unit is equipped with PFC power supplies and is controlled by an
electronic system to carry out the functions of self-test. The front panel
provides detailed information about the functional states of the equipment.
Power supplies
The switching power supply ALSW148PFC, featuring flyback technology,
is equipped with PFC (Power Factor Correction) circuit, which optimizes
the electric efficiency (higher than 90 %), which allows considerable energy
savings and low heat generation.
The power supply complies with the directives EMC (electromagnetic
compatibility directive) and LVD (Low voltage directive) and is provided with
the voluntary quality mark CSV (certificate with surveillance) issued by IMQ.
116
117
Power supplies
POWER SUPPLIES
Supply units
H. 365mm
D. 170mm
L. 320mm
TAPS-8
Power supply unit. Complies with EN 50131-6. Performance Level Grade 2 or Grade 3 as a function
of the batteries allocated. Provides a voltage of 14.4V DC with a current of 8A. Battery test and
release automatic functions for deep discharge. Front control panel with 6 LEDS which report the
group status. Battery housing: 2 (12V-17Ah). Metallic enclosure. Black.
Item no. F107TAPS-8
TAPS-8 - Technical and functional specifications
EPS unit
Classification
Legislation
Level of performance
14.4V 8A - (type A)
Complies with EN
50131-6
Grade 2
(autonomy 12 hours)
Grade 3
(autonomy 60 hours)
Power supply outputs
5 independent
Deliverable current
1.1 A x output
Overload warning
Electrical
Output voltage
characteristics
Ripple (max. load)
of output
Charging time at 80%
Current for battery
charger
Current for appliances
EPS Loss
Outputs
118
APS Fault
1 LED x output
Min. 14V - Max. 14.5V
≤70mV pp
19 hours
(2 17Ah batteries)
Low battery voltage - battery 1 failure
Battery 2 fault - Overload
Power supply fault - EPS status
Optical
indications
Functions
Battery test
Battery release
Supply voltage
Maximum current
Electrical
requirements
Battery housing
Max. 850mA x battery
Environmental class
Max. 5.5A
NC contact
Electronic relay
NC contact
Electronic relay
Physical
Enclosure
specifications
Dimensions (LxHxD)
Weight
Automatic and
independent
Automatic below 8.8 V
Mechanical
micro-switches
230 V AC +10% -15%
50 Hz
600mA~
8A @ 12V
2 12V-17Ah
-10°C .... + 55°C
II
Metal
320x365x170mm
5.3kg
UPS1260
Power supply unit rating: 12V 6A. Environmental class II. Provides a voltage of 13.8 V DC with a
current of 6A. No external optical indicator. Battery housing: 2 (12V-17Ah).
Metallic enclosure. Black.
POWER SUPPLIES
Item no. F107UPS1260
UPS1260 - Technical and functional specifications
Classification Power supply unit
13.8V 6A
4 independent
1.2A x output
Deliverable current
Overload warning
1 LED x output
Electrical
characteristics Output voltage
of output
13.8V
Ripple (max. load)
Current for battery
charger
≤160mV pp
Max. 1.2A
Max. 4.4A
Mechanical
micro-switches
Supply voltage
Maximum current
Electrical
requirements
Battery housing
230 V AC +10% -15%
50 Hz
625mA~
6A @ 14.4V
1 max. 12V-17Ah
-10°C .... + 55°C
II
Environmental class
Physical
Enclosure
specifications
Metal
Dimensions (LxHxD)
320x365x170mm
4.8kg
Weight
UPS2435
Power supply unit rating: 24V 3.5A. Environmental class II. Provides a voltage of 27.8V DC with a
current of 3.5A. Battery housing: 2 (12V-17Ah). Metallic enclosure. Black.
Item no. F107UPS2435
UPS2435 - Technical and functional specifications
Classification
Power supply unit
27.8V 3.5A
Deliverable current
4 independent
700mA x output
Overload warning
1 LED x output
Electrical
characteristics Output voltage
of output
27.8V
Ripple (max. load)
Current for battery
charger
≤180mV pp
Max. 700mA
Max. 2.8A
Mechanical
micro-switches
Supply voltage
Maximum current
requirements
Electrical
Battery housing
230V AC +10% -15%
50 Hz
800mA~
3.5A @ 27.8V
2 max. 12V-17Ah
-10°C .... + 55°C
II
Environmental class
Physical
Enclosure
specifications
Metal
Dimensions (LxHxD)
Weight
320x365x170mm
4.8kg
Power supplies
ALSW148PFC
Flyback switching power supply equipped with PFC circuit. Complies with EN 60950-1 and EN
50130-4 +A2. Provides a voltage of 14.4V DC with a current of 8A. Metallic enclosure.
Item no. F107ALSW148PFC
119
VIDEOALARM
VIDEOALARM
Evolution
The ongoing evolution of the Tecnoalarm systems reaches a new milestone
of technological excellence: "Videoalarm".
Videoalarm can be combined with the systems:
TP8-88, TP8-96 VIDEO, TP16-256 and TP16-512.
New concepts
With the Videoalarm system, Tecnoalarm redefines the traditional concepts
of video control. Videoalarm extends the features of the Tecnoalarm
anti-intrusion systems with video functions.
The integration
The integration of the two systems is complete and synergistic, and expresses
benefits of compactness, functionality and performance of absolute
importance, benefits that the systems of conventional videomonitoring cannot
express.
The management
The central node for the management and display of the Videoalarm system
consists of the video console TSP7000. The console interfaced to the
anti-intrusion alarm system, represents the global control component of the
alarm, anti-intrusion and video control systems.
120
121
Videoalarm
Video console
VIDEOALARM
TSP7000 BIO-TV
Programming and multifunctional management console. Management of video streaming from 24
cameras, which can be displayed individually or in quad. Fingerprint biometric reader.
TV output for external monitor. 7” LCD touch screen display 65000 colours resolution 800x480dpi.
Ethernet input. Serial line RS422. Design by Pininfarina. Surface mount or flush mounting.
Antistatic ABS enclosure. Size/footprint (LxHxD) 193x161x101mm. Metal grey cover.
Item no. F210TSP7000BITV
TSP7000
Programming and multifunctional management console. Management of video streaming from 24
cameras, which can be displayed individually or in quad. 7” LCD touch screen display 65000 colours
resolution 800x480dpi. Ethernet input. Serial line RS422. Design by Pininfarina.
Surface mount or flush mounting. Antistatic ABS enclosure.
Size/footprint (LxHxD) 193x161x101mm. Metal grey cover.
Item no. F210TSP7000
Standard console
TSP7000 STD-BIO
Programming and multifunctional management console. Fingerprint biometric reader.
7” LCD touch screen display 65000 colours resolution 800x480dpi. Ethernet input.
Serial line RS422. Design by Pininfarina. Surface mount or flush mounting.
Antistatic ABS enclosure. Size/footprint (WxHxD) 193x161x101mm. Metal grey cover.
Item no. F210TSP7000STBI
TSP7000 STD
Programming and multifunctional management console. 7” LCD touch screen display 65000 colours
resolution 800x480dpi. Ethernet input. Serial line RS422. Design by Pininfarina. Surface mount or
flush mounting. Antistatic ABS enclosure. Size/footprint (LxHxD) 193x161x101mm. Metal grey cover.
Item no. F210TSP7000ST
TSP7000 - Accessories
TSP LINK
Interface for the connection of the video
console TSP7000 to systems without
Ethernet socket (TP8-64 BUS,
TP8-64 BUS MET and TP16-256).
Connection to TSP7000 RS422.
Connection to the TTL system.
Item no. F130TSPLINK
122
INDOOR
IP cameras
TEC2000/LF
IP camera for indoor use. VGA (640x480 dpi). 4.09mm fixed focus lens.
MPEG4. Dual stream. Power supply: 5 or 12VDC. Design by Pininfarina.
VIDEOALARM
Item no. F200TEC2000LF
TEC2000/LI
IP camera for indoor use. VGA (640x480 dpi). MPEG4. Dual stream
Interchangeable lens. Lens not included. Power supply: 5 or 12VDC.
Design by Pininfarina.
Item no. F200TEC2000LI
FD8134
IP camera for indoor use. Dome 1 MegaPixel (1280x800dpi). Fixed focus lens 3.6 mm - F1.8.
IR Illuminator up to 10mt (8 LEDS). Removable IR CUT filter.
MPEG4 - MJPEG - H264. 12VDC power supply or POE (48VDC). Vivotek.
Item no. F200CAMFD8134
PZ7121
IP camera for indoor use. D1 (704x576 dpi). Varifocal Lens 4.2mm-42mm.
Optical Zoom 10X. Digital Zoom 10X. Rotary Motion Pan 300° Tilt 135°.
MPEG4. Dual stream. 12VDC power supply or POE (48VDC). Vivotek.
OUTDOOR
Item no. F200CAMPZ7121
IP8332
IP camera for outdoor use IP66. 1 MegaPixel. 3.6mm fixed focus lens.
IR Illuminator up to 15mt IR cut filter Day Night. 1/4" CMOS sensor. H264 and MPEG4. Four
simultaneous streams. Power supply 12/48VDC (POE). Vivotek.
Item no. F200CAMIP8332
FD8134V
IP camera for outdoor use IP66. Dome 1 MegaPixel (1280x800dpi). Fixed focus lens 3.6 mm F1.8. IR Illuminator up to 10mt (8 Leds). Removable IR CUT filter. Vandal Proof IK10.
MPEG4-MJPEG-H264. 12VDC power supply or POE (48VDC). Vivotek.
Item no. F200CAMFD8134V
IP7361
IP camera for outdoor use IP67. 2 MegaPixel. Varifocal Lens 3mm-9mm.
IR Illuminator up to 15mt IR cut filter Day Night. 1/3.2" CMOS sensor. MPEG4.
Four simultaneous streams. Power supply 12/48VDC (POE). Vivotek.
Item no. F200CAMIP7361
FE8171V
IP camera for outdoor use IP66. 3.1 MegaPixel (1536x1536dpi). Fisheye view 180° full 360°.
Minimum illumination 1.17Lux. Removable IR CUT filter Day Night.
Vandal Proof IK10. MPEG4-MJPEG-H264. Four streams. Housing for MicroSD memory.
Built-in microphone. 12VDC power supply or POE (48VDC). Vivotek.
Item no. F200CAMFE8171V
IP camera for outdoor use IP66. Speed Dome VGA (640x480 dpi). Varifocal lens 4.1mm-73.8mm.
Optical Zoom 18X. High rotation speed (Pan 360° continuous, Tilt 0° .. 90°). Autofocus. MPEG4.
Dual stream. Vandal proof metallic enclosure. Preset setting up to 128 positions. Integrated
heater and blower. Power supply 24VAC. Vivotek.
Item no. F200CAMSD7151
123
Videoalarm
Fixed focus optics
LENS 4MM
4mm. fixed focus lens Fujinon.
VIDEOALARM
Item no. F230LENF4
LENS 8MM
Item no. F230LENF8
LENS 16MM
Item no. F230LENF16
Multi focus optics
LENS 3-8MM
Varifocal lens 3.0 mm-8.0mm. Fujinon.
Item no. F230LENV30-80
Varifocal lens 2.9mm-8.0mm. Day/Night. Fujinon.
LENS 2.7-13.5MM
Varifocal lens 2.7mm-13.5mm. Day/Night. Fujinon.
124
Video servers
VS7100
Video Server: 1 input channel for coaxial (analog) camera. MPEG4 - MJPEG - 3GPP.
Frame rate up to 30 fps. Dual stream. Audio IN and OUT. Digital I/O (Alarm + external sensor).
Resolution D1 704x576 (max). Motion detection.
Enclosure in aluminum. Power supply 12VDC. Vivotek.
VIDEOALARM
Item no. F200VIDVS7100
VS8401
Video Server: 4 input channels for coaxial (analog) cameras. H264 - MPEG4 - MJPEG.
Frame rate up to 30 fps. Dual stream for each input.
Audio IN and OUT. Digital I/O (Alarm + external sensor). Resolution D1 704x576 (max).
Motion detection. Enclosure in aluminum. Power supply 12VDC/ 24VAC. Vivotek.
Item no. F200VIDVS8401
Videoalarm - Accessories
BRACKET
IR ILLUMINATOR
Camera bracket.
Compatible with the models: IP7160,
IP7161, IP7330, IP7142, IP8332.
Dimensions: 240,6x103,8x61mm.
Additional IR illuminator.
20 LED. Range 10mt
Power supply 12V (through connector).
Item no. F220STAFFAHR
Item no. F220ILLUMIR
SPLITTER
INJECTOR 230VAC - 48V DC (POE)
Splitter 12V for 1 camera.
Allows the connection of a camera using
only the network cable.
AC input: 90 to 264V. Ethernet input from
control unit or Switch. Output DC48V
(POE). Allows the connection of 1 POE
camera (IEEE 802.3af) using a network
cable.
Item no. F220SPLITTER
Item no. F220INJECTOR
POWER SUPPLY 5VDC-2A
CABLE 4X2 AWG - UTP CAT 5
Power supply 230VAC/5VDC 2A
for cameras series TEC2000.
Cable for network connections.
4 twisted pairs.
External diameter 5.10mm.
Pack: 305mt. coil
Item no. F230POWER5DC
Item no. F11200000400
STD CRIMPER
PRO CRIMPER
Gripper for crimping RJ45, RJ12 and
RJ11 connectors. 6-8 pole connectors.
With stripping blade and cable shears.
Pliers for crimping RJ45 connectors in
zinc/aluminum alloy.
8 pole connectors.
With stripping blade and cable shears.
Item no. F220CRIMPASTD
Item no. F220CRIMPAPRO
NETWORK INSTALLATION KIT
Case containing: 1 pair of pliers to crimp
RJ45, RJ12, RJ11 connectors, with wire
stripping blade and cable shears. 1
tester for wiring. 80 RJ45 connectors.
Item no. F220CRIMPAKIT
125
SOFTWARE
SOFTWARE
Whatever your technical and sale management methods, you will find in the
Tecnoalarm software, the most suitable solutions to implement your business model.
Expand your horizons by activating post-sales services for your customers.
Start the flywheel of your success actively managing your customers.
Four levels of access to the Tecnoalarm software, a world of services with
differentiated functions, all of which can be personalized with constantly updated
licence plug-ins, allow to set up interesting management services for your customers.
The software allows to program the Tecnoalarm systems.
Locally via the interface PROG USB.
Remotely through the MINIMODEM device connected to the PSTN phone line.
The remote service software combined with a TECNOMODEM digital
modem/receiver allows to remotely manage the Tecnoalarm systems via
ISDN, PSTN, GSM carriers.
The TCP/IP Software via a personal computer connected to the Ethernet
network allows to remotely manage the Tecnoalarm systems.
Monitoring
The software TECNOMONITOR allows to monitor locally via a personal
computer, the operation of a Tecnoalarm system.
126
127
Software
LOCAL/REMOTE PROGRAMMING SOFTWARE
Software for Windows environment. The software allows to program the Tecnoalarm systems
locally or remotely. For local programming, it is necessary to use the interface PROG USB.
For remote programming, it is necessary to use the MINIMODEM connected to the PSTN phone line.
SOFTWARE
Item no. F130SOFTWARE/RW
MINIMODEM
Modem for remote programming. PSTN line communication interface.
RS232 connection port. The MINIMODEM, paired with the LOCAL/REMOTE programming
software, allows the remote programming of the Tecnoalarm systems.
Item no. F104MINIMODEM
PROG USB
Connection interface between PC and Tecnoalarm system. PROG USB paired with the LOCAL/
REMOTE programming software, allows to program the Tecnoalarm systems locally.
The device has different connection interfaces: USB, RS232, RS485 TTL.
USB connection cable supplied.
Item no. F130PROGUSB
REMOTE MANAGEMENT SOFTWARE
Software for Windows environment. The remote management software paired with the modem/
digital receiver for remote service TECNOMODEM, allows to remotely manage the Tecnoalarm
systems by means of ISDN-PSTN or PSTN-GSM phone carriers.
Item no. F130SOFTWARE/TW
TECNOMODEM
ISDN-GSM
Digital modem/receiver for remote service. Communication interfaces: ISDN line, GSM/GPRS cell
phone module. Connection ports: USB, RS232, TCP/IP.
The modem, combined with the remote service software, allows to receive events and remote
programming of Tecnoalarm systems.
Item no. F104MODISDNGSM
TECNOMODEM
PSTN-GSM
Digital modem/receiver for remote service. Communication interfaces: PSTN line, GSM/GPRS cell
phone module. Connection ports: USB, RS232, TCP/IP.
The modem, combined with the remote service software, allows to receive events and remote
programming of Tecnoalarm systems.
Item no. F104MODPSTNGSM
128
TCP/IP SOFTWARE
Included licence options
SOFTWARE TCP/IP 10 USERS
Item no. F130SWTCPIP/10
Item no. F130SWTCPIP
9
14
SOFTWARE
Software for Windows environment. The TCP/IP software installed on a PC connected to the
Ethernet network, allows to remotely manage, through a network with TCP/IP protocols,
the Tecnoalarm systems.
The software is available with different extensions (number of users allowed).
PROG USB
Connection interface between PC and Tecnoalarm system. PROG USB paired with the TCP/IP
software, allows to program the Tecnoalarm systems locally.
The device has different connection interfaces: USB, RS232, RS485 TTL.
Monitoring
TECNOMONITOR
Software for Windows environment. The software TECNOMONITOR allows to monitor locally via a
personal computer, the operation of a Tecnoalarm system. The connection between the PC and the
system to be monitored is managed by the connection interface PROG USB.
Included licence options
2
Item no. F130TECNOMONIT
PROG USB
Connection interface between PC and Tecnoalarm system to monitor the system with the software
TECNOMONITOR. The device has different connection interfaces: USB, RS232, RS485 TTL.
129
Software
License options
FLOOR PLANS
Item no. F130PLANIMETRIE
ARMING/DISARMING CONTROL
SOFTWARE
Item no. F130CONINSDIS
NETWORK
Item no. F130RETE
Licence for floor plan management.
Licence 2
Licence for remote monitoring of program
activation/deactivation for the controlled
systems.
Licence 3
Licence for Ethernet network connection of the
various remote service centres. Maximum of 8.
Licence
4
Item no. F130OUTPROT
Programmable output protocol OUTPROT,
which sends the events received from the
Centre to external management devices.
Licence 5
RSC®
The licence allows managing RSC® devices.
OUTPROT
Licence 7
SMS
Item no. F130GESTIONESMS
REMOTE IP
Item no. F130REMOTEIP
Licence for the management of SMS text
messages
Licence 8
Licence for the management of the TCP/IP
protocol (with Tecnomodem).
Licence 9
ADVANCED PROGRAMMING LEVEL 1
Licence for advanced programming of first
level of the Tecnoalarm systems.
Licence 10
ADVANCED PROGRAMMING LEVEL 2
Licence for advanced programming of second
level of the Tecnoalarm systems.
Item no. F130AVANZATA
SINOTTICO
Item no. F130SINOTTICO
TECNOMSG
Item no. F130TECNOMSG
DEVICE IP
Licence 11
Licence for the management of the virtual
dashboards.
Licence 14
Licence that allows the customization of the
vocabulary.
Licence 15
Enables the management of IP devices.
Licence 19
PROGRAMMING DATE CHECK
Item no. F130CONDATAPGM
Licence for control and automatic update of
the programming date.
Licence 22
Services
COPY OF SOFTWARE LICENCE
Item no. F130LICSOFTWARE
130
Service of copy of the use licenses of the Tecnoalarm software.
SOFTWARE
TCP/IP
Remote management: investing to reduce costs
Fewer kilometres, more services.
Less time, more care.
Targeted, programmed direct interventions
Travel time on the territory.
131
myApp
Tecnoalarm
myTecnoalarm
myTecnoalarm, the APP for iPhone and Android,
for remote management of the anti-theft systems has
never been so simple and intuitive.
The communication between the App and the system
takes place in real time on demand.
By interacting with the touch icons, the user can enable
or disable programs and remote controls,
as well as check their status.
myTecnoalarm: an essential tool to manage and monitor
your system.
Security - The communications protocol used for connection
provides encryption and a dual security level: passphrase and
access code of the user.
Programs - Customizable icons allow to identify the
programs and check their status. Turning on and off
becomes a simple, intuitive task.
Remote controls - The customizable interface allows to
manage home appliances, remotely enabling or disabling the
services at your home.
Event Log - Users in possession of the access code can, at
any time, view the events stored by the system.
Settings - This menu allows to choose the icons that depict
the programs and the remote controls and to give them an
alphanumeric name.
132
133
ACCESSORIES
ACCESSORI
ES
ACCESSORIES
Tecnoalarm presents to its customers a wide and careful selection
of system accessories, which complement and complete the range of
products of its catalogue. The accessories offered meet stringent quality
requirements and comply with the applicable product standards.
The combination between the accessories offered and the Tecnoalarm products
has been tested and evaluated in order to obtain an excellent functional synergy
and maximum technical satisfaction.
Batteries
Rechargeable lead acid batteries with the highest quality produced
by market-leading companies. The range consists of 12V batteries
with standard size and different current capacity.
Cables
Multicore shielded electrical cables for the connection of antitheft devices.
Flame-retardant, with different classes of insulation. Various configurations
of diameter, sections, and conformations of the wires (also twisted pair wires).
Compliant with all the CEI standards related to the type of product.
Contacts
Contacts of various sizes, materials, and types, suitable for wall mounting
or flush mounting, specialized models for each material, structure of frame
and type of protection, models compliant with IEC/EN 50131-2-6.
134
135
Accessories
Batteries
YUASA
NP 1,2-12
Lead acid rechargeable battery YUASA 12 VDC 1.2 Ah.
Dimensions (LxHxD) 97x52.5x48mm.
ACCESSORIES
Item no. F108YUASA 1,2
NP 2,1-12
Lead acid rechargeable battery YUASA 12 VDC 2.1 Ah.
Dimensions (LxHxD): 178x64x34mm.
Item no. F108021 YU
NP 7-12
Lead acid rechargeable battery YUASA 12 VDC 7 Ah.
Dimensions (LxHxD): 151x97.5x65mm.
Item no. F108YUASA 7
NP 12-12
Item no. F108YUASA 12
NP 17-12
Item no. F108017 YU
NP 24-12
Item no. F108240 YU
FIAMM
FG 2-12
Lead acid rechargeable battery FIAMM 12 VDC 2 Ah.
Dimensions (LxHxD): 178x67x34.5mm.
Item no. F10802 FI
FG 7.2-12
Lead acid rechargeable battery FIAMM 12 VDC 7.2 Ah.
Item no. F108FIAMM 7
FG 12-12
Lead acid rechargeable battery FIAMM 12 VDC 12 Ah.
Item no. F108FIAMM 12
FG 18-12
Lead acid rechargeable battery FIAMM 12 VDC 18 Ah..
Item no. F108018 FI
136
Flame retardant cables CEI 20-22
ACCESSORIES
In the preparation of a system,
the installer must also operate in
compliance with the standards CEI
20/22-III and IEC 60332-3C.
Cables - Class 2 insulation 300/500V
SECTION
DESCRIPTION
DIAMETER
(outer)
COIL
Item no.
2x022
Shielded cable 2x0.22
3.3mm
100m*
F11200000180
4x022
3.6mm
100m*
F11200000200
5x022
3.9mm
100m*
F11200000170
6x022
4.2mm
100m*
F11200000301
8x022
4.6mm
100m*
F11200000202
10x022
5.2mm
100m*
F11200000203
14x022
5.6mm
100m*
F11200000213
20x022
6.6mm
100m*
F11200000214
2x050+2x022
Shielded cable 2x0.50+2x0.22
4.3mm
100m*
F11200000204
2x050+3x022
Shielded cable 2x0.50+3x0.22
4.7mm
100m*
F11200000205
2x050+4x022
Shielded cable 2x0.50 + 4x0.22
4.8mm
100m*
F11200000206
2x050+5x022
4.9mm
100m*
F11200000220
2x050+6x022
5.2mm
100m*
F11200000207
2x050+8x022
5.8mm
100m*
F11200000208
2x050+10x022
5.9mm
100m*
F11200000216
4x075
5.3mm
100m*
F11200000230
2x075+4x022
5.0mm
100m*
F11200000209
2x075+6x022
5.7mm
100m*
F11200000303
2x075+8x022
5.9mm
100m*
F11200000211
2x075+10x022
6.2mm
100m*
F11200000212
* Availability of 500mt coils on request
137
Accessories
Cables - Class 4 insulation 600/1000V
ACCESSORIES
SECTION
DESCRIPTION
DIAMETER
(outer)
COIL
Item no.
4x022
4.3mm
200m*
F11200000305
6X022
4.9mm
200m*
F11200000302
2x075+6x022
6.1mm
200m*
F11200000304
Twisted cables - Class 2 insulation 300/500V
SECTION
DESCRIPTION
2x1 + 2x050
2x1 + 2x(2x050)
2x1 + 2x(2x050)
(2X05)+(1X1+1X05)+1X1
2x0.35+(2x0.22)+1x0.22
Shielded twisted cable
2x1 + 2x0.50 White Sheath
2x1 + 2x(2x0.50) White Sheath
Shielded Cable 2x1 + 2x(2x0.50)
Black sheath for outdoor use
(2x05)+(1x1+1x05)+1x1-(LCD 300/S)
(2x0.35) + (2x0.22) + 1x0.22
DIAMETER
(outer)
COIL
Item no.
5.6mm
100m*
F11200000223
6.6mm
100m*
F11200000226
6.6mm
200m*
F11200000224
6.5mm
100m*
F11200000228
5.0mm
200m*
F11200000229
Twisted cables - Class 4 insulation 600/1000V
SECTION
2x1 + 2x050
2x1 + 2x(2x050)
2x1 + 2x(2x050)
DESCRIPTION
2x1 + 2x0.50. White sheath
2x1 + 2x(2x0.50). White sheath
2x1 + 2x(2x0.50). Black sheath
DIAMETER
(outer)
COIL
Item no.
6.2mm
200m*
F11200000225
7.0mm
200m*
F11200000309
7.2mm
200m*
F11200000227
Halogen free cables - Class 2 insulation 300/500V
SECTION
DESCRIPTION
DIAMETER
(outer)
COIL
Item no.
4X0.22
4.0mm
200m*
F11200000240
6x0.22
4.9mm
200m*
F11200000241
2x0.50+4x0.22
5.4mm
200m*
F11200000242
2x0.75+4x0.22
5.6mm
200m*
F11200000243
Halogen free LSZH cables with low emission of smoke and toxic gases. Their use is mandatory in public buildings.
Reference standards: EI 20/22-III, IEC 60332-3C, CEI UNEL 36762.
* Availability of 500mt coils on request
Relay boards
138
BIRELÈ
BIRELÉ BOX
2 relay card 12V (independent).
Control coil free from potential.
Relay contact outputs in free exchange.
Enclosure in aluminum for BIRELÉ card.
Dimensions (LxHxD) 70x117x52mm
ABS material.
Item no. F127BIRELEN
Item no. F127BIRELENBOX
1.001N
1.021N
In aluminum. Triple balancing. Wall
mounting. White.
Complies with EN 50131-2-6 Grade 3.
As 1001N but with triple balancing and
tear-resistant.
Item no. F1061001N
Item no. F1061021N
1.003N
1.005N
In aluminum. Dual balancing. Wall
mounting. White.
In aluminum. For large distances of
intervention. Wall mounting. White.
Item no. F1061003N
Item no. F1061005N
ACCESSORIES
High security reed contacts
Reed contacts
CTI 002
CTI 102
In brass. High sensitivity. Flush
mounting. Pack of 10 items*.
In brass. High sensitivity. Flush
mounting. Pack of 5 items.
Item no. F106CTI 002
Item no. F106CTI 102
CTC 002
CTC 013
In aluminum. For metal doors.
Wall mounting. Pack of 2 items*.
In aluminum. Wall mounting. Cable
length 60cm Pack of 5 items*.
Item no. F106CTC 002
CTC 051
314
In aluminum. Miniaturized
In brass. Flush mounting. Pack of 10
items*.
Item no. F106314
355
403 TF
In aluminum. Wall mounting. Pack of 10
items*.
In plastic. Wall mounting.
Pack of 10 items*.
Item no. F106355
Item no. F106403 TF
405 M
405 MM
In plastic. Wall mounting.
Pack of 10 items*.
In plastic. Wall mounting. Brown. Pack of
10 items*.
Item no. F106405M
Item no. F106405MM
414 CTF
414 CTF2
In nickel plated brass. Flush mounting.
Cable 30cm Pack of 10 items*.
In nickel plated brass. Flush mounting.
2m cable. Pack of 10 items*.
Item no. F106414CTF
Item no. F106414CTF2
139
Accessories
ACCESSORIES
415 TF
In plastic. Flush mounting.
Pack of 10 items*.
As 415 TF but with 2-meter long cable.
Flush mounting. Pack of 10 items*.
Item no. F106415 TF
Item no. F106415TF2
423 TF
450 N
In plastic. Flush mounting.
Pack of 2 items*.
In aluminum for swinging doors.
Wall mounting.
Item no. F106423TF
Item no. F106450N
455
In metal for shutters and blinds.
Pack of 2 items*.
In aluminum for doors and windows in iron.
Item no. F106455
Item no. F106460N
460 NS
462 N
As 460N but with contact in exchange.
In aluminum for doors and windows in iron.
Item no. F106460NS
Item no. F106462N
Rod and rope mechanical contacts
470
474
Rod contact for shutters or blinds.
Pack of 5 items*.
Accompanying slide for rope.
Item no. F106470
Item no. F106474
SW 912
Rope contact for rolling shutters.
Pack of 3 items*.
Item no. F106SW 912 Flooding detectors
1450
1450S
Flood and moisture detector.
The moisture detector's sensitivity is
adjustable. Supply voltage of 12 or 24V DC.
Relay in exchange alarm output.
The detector 1450 can be connected to
up to 10 additional external probes 1450S.
Additional flooding detection probe, can be
connected to the flood detector 1450.
The detector 1450 can be connected to
up to 10 additional probes 1450S.
Item no. F1061450
Item no. F1061450S
RPL108
Flooding detector and smart actuator. Particularly suited to monitor situations of flooding of pits, basements, gaps
and to implement the necessary countermeasures. Dynamic LED indication of the operating state.
Supply voltage of 10 to 30V DC. Relay output in free exchange - contacts 1A-30V DC. ABS enclosure.
Protection degree IP68. 1 meter cable length Dimensions: 72x91x39mm.
Item no. F106RPL108
140
443
444
Glass break sensor in plastic with
ampoule of mercury.
Pack of 10 items*.
Inertial sensor in plastic.
Orientable 360°.
Pack of 5 items*.
Item no. F106443
Item no. F106444
Hold-up detectors
484I
484ME
Reed button for robbery silent alert.
Self-protected. NC signalling and tamper
outputs. Self-retain button, reset with
reset key. Complies with IMQ - Level III.
Reed button for robbery silent alert with
memory signalling LED. Self-protected.
NC signalling and tamper outputs.
Memory reset in the absence of a power
supply. Power supply 12V DC. Complies
with IMQ - Level III.
Item no. F106484I
Item no. F106484ME
485ME
476
Footboard for robbery silent alert with
memory signalling LED. Operable with
the movement of the foot. NC alarm
output.
Memory reset in the absence of a power
supply. Power supply 12V DC.
Metal material.
Panic report button. The pressure of the
key causes the actuation of an exchange
microswitch. Protected against the
opening. Equipped with a transparent
shield door sealable with lead.
Complies with IMQ - Level III.
Item no. F106485ME
Item no. F106476
Optical repeaters
1490CR
1490CV
Optical repeater with fixed/flashing light
Red signalling LED.
Green signalling LED.
Item no. F1061490CR
Item no. F1061490CV
1490CG
Yellow signalling LED.
Item no. F1061490CG
Junction box IP54
1465
Self-protected junction box IP54.
20 pole connection terminal max. section
2.5 sq. mm. Operating temperature
-25 °C. .. +70°C. Enclosure in aluminum,
epoxy coating. White.
Protection degree IP54.
Item no. F1061465
141
ACCESSORIES
Inertial and glass break sensors
MERCHANDISING
MERCHANDISING
Enhancing the brand
The new communication strategy of Tecnoalarm, recently implemented on
the most important national media, focuses on the end user, an impacting
communication strategy aimed at enhancing the Tecnoalarm brand.
With the aim of strengthening the goals achieved so far, Tecnoalarm promotes
the adoption of forms of image and promotion, to communicate effectively to
the market the product, with harmonized procedures, capable of valuing and
transmit cognitively the brand identity, via sales demonstration tools, display
equipment, coordinated clothing and accessories, which can promote and
encourage the sales activities.
Demonstration cases
The use of the demonstration cases drives the sales of the systems. The
functional presentation enhances the products, orients customer choices
and increases the perception of the value of the product presented.
Display equipment
The display equipment characterizes and organizes the exhibition space
at the point of sale. The use of exhibition kits, coordinated, and functional,
increases the attractiveness of your point of sale.
Apparel
Also the use of coordinated apparel and clothing accessories pursues
the goals of brand communication. The professional image transmitted
by the staff is positively perceived by the customer.
142
143
Merchandising
Demonstration cases
CASE TP8-88
MERCHANDISING
CASE TP8-28
TP8-88 system demo case.
The case allows to present,
explain and demonstrate to
your customers the operation of
the system in a simple and fast
manner.
The devices used enable to
perform a functional simulation
of all the services offered by the
system.
explain, and demonstrate to
manner.
system.
Item no. P100VALIGIA828
CASE TP16-256
CASE UTS
manner.
system.
UTS console demo case.
your customers the operation
in a simple and fast manner.
The use of the UTS console
is enhanced by a complete
functional simulation, which
highlights its performance.
Item no. P100VALIGIAUTSP
UTS CASE + TP8-28 GSM
UTS CASE + TP8-28 GSM + RX300
UTS console demonstration
case with system TP8-28 GSM.
your customers the operation
The use of the UTS console
functional interaction with the
system, which highlights its
performance.
Item no. P100VALIGIAUTSM
UTS console demonstration
case with system TP8-28 GSM
and receiver RX300. The case
allows to present, explain and
demonstrate to your customers
the operation in a simple and
fast manner. The use of the
UTS console is enhanced by a
complete functional interaction
with the system, which
highlights its performance.
Item no. P100VALIGIAUTSG
CASE TSP7000
VIDEOALARM CASE
VIDEOALARM system demo
case. The case allows
to present, explain and
demonstrate to your customers
the operation in a simple and
fast manner. The ease of use
highlights the performance
offered by the system.
Item no. P100VALIGIAV1
Demo case of VIDEOALARM
system with System TP8-96
VIDEO.
The suitcase allows to present,
explain and demonstrate to the
customers the operation of a
true integrated anti-intrusion
and video surveillance system
The potential of the integration
highlights the performance
offered by the system.
Item no. P100VALIGIAVID
WIRELESS CASE
Demo case of a WIRELESS system.
explain and demonstrate to your
customers the operation in a
simple and fast manner.
The principle of operation of
various detectors via radio
through a full functional
simulation, which highlights the
performance of the device.
Item no. P100VALIGIAWIR
144
Display equipment
Display unit in metal with a
single exposition surface,
composed of 1 frame with 2
hinged grids.
Assembly resting on the wall.
Panel Size (LxHxD)
100x200x10cm.
Display unit in metal with dual
exposition surface, composed of
1 frame with 4 hinged grids and
support base.
Panel Size (LxHxD)
100x213x12cm.
Item no. P100ESPDOPP
Item no. P100ESPSING
UPPER GRILLE
LOWER GRILLE
Lower grille replacement for
exhibition units in single or dual
metal.
Upper grille replacement for
exhibition units in single or dual
metal.
Item no. P100GRIGLIASUP
Item no. P100GRIGLIAINF
DRAPE FOR EXHIBITION
BRACKET
Accessory for exhibition units.
Metal shelf (depth 300mm.)
Product advertising towel with
Tecnoalarm Worldwide logo.
Dimensions (WxH) 100x200cm.
Item no. P100MENSOLA
Item no. P100TELOESPW
STAND FOR EXHIBITION
ALUCOBOND® PANEL
Tripod for exhibition with
structure in clear plexiglass.
Dual exhibition support face for
ALUCOBOND® panels.
Size/footprint (LxHxD):
700x1910x750mm.
Item no. P100ESPPLEXI
Equipment support panel for
exhibition stand.
Alucobond® glossy finish
Dimensions (WxH) 1x1mt.
Item no. P100ESPPAN
CLOSING CASING
Pair of trapezoidal cases for side
closure/masking of exhibition
stand. Black plexiglass material
with gloss finish.
Item no. P100ESPCART
145
MERCHANDISING
DUAL DISPLAY UNIT
SINGLE DISPLAY UNIT
Merchandising
Apparel
CAP
WORLDWIDE CAP
Grey cap with visor.
MERCHANDISING
Blue cap with visor.
Item no. ZCAPPELLINO
Item no. ZCAPPELLINOWW
TIE
VEST
Grey tie.
Tecnoalarm logo.
Blue vest with pockets.
Tecnoalarm logo.
Item no. ZCRAVATTA
Item no. ZGILET
SWEATSHIRT
WORLDWIDE SWEATSHIRT
Grey sweatshirt with zip.
Grey sweatshirt with zip.
Tecnoalarm logo.
Item no. ZFELPA
Item no. ZFELPAWW
SHIRT
POLO SHIRT
White shirt.
White polo shirt.
Item no. ZCAMICIA
Item no. ZPOLO
TROUSERS
JACKET
Blue winter jacket.
Blue trousers with pockets.
Item no. ZPANTALONI
Item no. ZGIUBBOTTO
System accessories
PROTECTED AREA SIGN
PROTECTED AREA ADHESIVE
Warning sign, screen printed.
Material PVC. Diameter 300mm
thickness 3mm. Material:
aluminum.
Diameter 300mm thickness
1.5mm.
Kit of three stickers "PROTECTED
AREA" of various diameters:
180mm, 90mm and 50mm.
Item no. P100CARTELPVC
Item no. P100CARTELALL
146
P100ADESIVI
ICONOGRAPHY
ICONOGRAPHY
Control devices
Interfaces
14.4V 8A
Value of the voltage and current
of the power supply
or the supply unit
ANTI SPOOFING
The fingerprint reader
recognizes access attempts
with fake fingers
ISDN INTERFACE
Connection Interface for ISDN
phone line
PFC
Power supply featuring flyback
technology
CODE READER
Control device of console to
enter access codes
RS232 INTERFACE
Availability of a RS232
standard connection interface
SELF TEST
Power supply unit with
automatic test functions
(self-test)
CARD READER
Control device of
RFID card reader
RS485 INTERFACE
Availability of a RS485
standard connection interface
DISPLAY
Size in inches of the console
display
TTL INTERFACE
Availability of a TTL standard
connection interface
ABS BOX
Product enclosure consisting
prominently in ABS plastic
material
FINGER PRINT READER
Control device of the
fingerprint reader
USB INTERFACE
Availability of a USB standard
connection interface
ALUMINUM BOX
prominently in aluminum
FLOOR PLANS
The console manages
interactive custom plans
ASA BOX
prominently in ASA plastic
material
HELP
The console is provided with the
help key that provides the user
with indications for its use
APPROVAL
Product homologated according
to the mentioned standards
IP
Protection class from
penetration of dust and liquids
of the enclosure
PRIVACY PROTECTION
The stored fingerprints are not
attributable to the identity.
EN
Product which complies with
the mentioned standards
METAL BOX
prominently in metal
PROGRAMS MANAGEMENT
Maximum number of programs
that the consoles or the control
devices can manage
Enclosures
ICONOGRAPHY
Power Supplies
Standards
PROX KEY READER
Control device of the proximity
key reader
TOUCH SCREEN
Touch screen display
VOICE
Console or device with speech
synthesis management
147
Iconography
Detectors
VOLUMETRIC
Detector that provides a
volumetric protection
ICONOGRAPHY
CHANNELS
Number of channels used by
the microwave-barrier for the
transmission
AND LOGIC
Detector with AND detection
logic
AND WALK LOGIC
Detector with AND and WALK
detection logic
AND WALK OR LOGIC
Detector with AND WALK and
OR detection logic
ANTI-MASK
Detector with masking
self-protection function
CURTAIN
Detector that provides a
curtain type protection
HIGH
Physical height of the
column in millimetres
LONG RANGE
Detector with long range
protection
PET
Detector with volumetric
protection immune to
detection of animals
RANGE
Indicates the maximum
coverage of the detector
RX BEAMS
Additional RX column with X
protection beams
SELF TEST
Detector with automatic test
functions (self-diagnosis)
SYNC MODE
Active infrared barrier with
synchronized operation
TEMPERATURE COMPENSATION
Detector with compensation of
the operating parameters as a
function of temperature
TX + RX x BEAMS
Active infrared barrier.
Column TX + column RX with X
protection beams
148
ZONE BUS DETECTORS
Indicates that the device has
zone inputs specializable as
Zone Bus
Sirens
LED
Flashing light with LED
technology.
With notification features
LIGHT STATUS
The flashing light of the siren
optically signals the ON status
of the system
PROGRAMS
MATCHING OPERATING
Combination of alerts and
alarms to the operating
programs of the system
PROTECTION
Siren with device capable of
detecting the introduction of
foams
PROTECTION
Siren with device capable of
detecting the perforation of the
enclosure
Systems and expansions
ACCESS PERIOD
Management of time periods
in which it is allowed the
access to the secure site
CODES
Number of access codes
managed by the system
CONVENTIONAL DETECTORS
Indicates that the device has
X zone inputs for conventional
detectors
FINGER PRINT
Number of fingerprints
FINGER PRINT MANAGEMENT
Management of fingerprint
reading device
LEDS
Number of signalling LEDS
available on the device
OUTPUTS
Number of alarm and/or
signalling outputs available on
the device
POWER SUPPLY
Indicates that the product is
equipped with power supply
SELF POWERED
Self-powered siren
SELF TEST
Siren with automatic test
functions (self-diagnosis)
SOUND LEVEL
Sound power level of the siren
expressed in decibels at the
distance indicated
SOUND LEVEL
Sound power level (volume) of
the programmable alarm signal
TONE MODE
Tones of the programmable
audible alarm signal
XENON
Flashing light with Xenon
technology
PROGRAMS
Number of programs managed
by the system
REMOTE CONTROLS
Number of remote controls
RFID KEYS
Number of keys managed
by the system
SENSOR BUS DETECTORS
Number of RSC® detectors
which can be connected to the
device
SIREN BUS
Indicates the presence of a
serial line for connecting RSC®
sirens
SERIAL BUS
Indicates the presence of a
Serial Bus line for connecting
system peripherals
TIMER
Management of programmable
timers
GSM-GPRS MODULE
Integrated GSM-GPRS cell
phone module
WIRELESS
Indicates that the system
handles wireless devices
GSM MODULE
Integrated GSM cell phone
module
YEARLY CALENDAR
Programmable management
of yearly calendars
PSTN INTERFACE
Connection interface for PSTN
phone line
ZONES
Zones of the system. The first number
indicates the basic equipment,
the second the expandability
Videoalarm
STREAMING VIDEO
The console is capable of
handling streaming video
cameras
TECNO OUT
Management of the Techno
OUT communication protocol
VIDEO OUT
The console has a video output
to an external TV monitor
ADVANCED CONFIGURATION
Product with advanced level
programmable language
myTecnoalarm
Remotely manageable system
with Apps for iphone and
Android
RDV®
Devices capable to generate
or manage the RDV® alarm
acoustic modulation
RSC®
RSC® technology. Indicates
devices with RSC® features
and performance
ICONOGRAPHY
TRANSMITTERS
Number of radio controls
Wireless
433MHz
Wireless device that uses
the transmission frequency
indicated
433MHz TWIN 868MHz
Wireless device that uses the
transmission frequencies
indicated
DEVICE SUPERVISION
Supervision of the wireless
devices; their presence is
periodically tested
Communication carriers
ETHERNET 8 PORT SWITCH
Connection interface for
Ethernet network switches
with 8 ports
ETHERNET INTERFACE
Connection interface for
Ethernet network
TCP/IP MANAGEMENT
System suitable for the
management of an Ethernet
interface
GSM EXTERNAL
Additional GSM cell phone
module (GSM EXT or Secondary)
LITHIUM BATTERY POWERED
Device powered by lithium
batteries
Ni-Cd BATTERY POWERED
Device powered by Ni-Cd
rechargeable batteries
RF MONITOR
Supervision of the signal/noise
ratio of the wireless devices
TX BDI RX
Bi-directional wireless device
equipped with receiver and
transmitter
GSM-GPRS EXTERNAL
Additional GSM-GPRS c
ell phone module
(GSM EXT or Secondary)
149
TERMS
GENERAL SALES
GENERAL SALES TERMS
TERMS
1. PREMISES
This document contains the general sales terms that govern the trading relations between Tecnoalarm S.r.l. (seller) and its customers (buyers), for any type
of product and service. Although it is not explicitly specified, these terms are applied to all customers, that is professional customers. The terms are an
integral part of the "Tecnoalarm general catalogue", and should be considered implicitly known to and accepted by the Customer in case of any purchase
order sent to Tecnoalarm. The terms, if no other agreement (void if not in written form) exists, are to be considered as binding for the sale of any product
of Tecnoalarm, with right for the latter to change them without notice and without prejudice to the validity of previous terms in force at the time of the
order. Any different terms of the buyer shall not apply to the relations between the parties if not accepted in writing and, in this case, shall be coordinated
with these terms, unless expressly exempted by written act. The acceptance of these terms and the accompanying warranty conditions, as well as all the
reports, agreements, and generally, the subsequent behaviours of the parties eventually governed by the same, do not entail the transfer to the purchaser
of any exclusive right, nor the establishment of relations of granting, commission and mandate, with or without representation, as well as do not give the
purchaser the right to market the Tecnoalarm products via e-commerce, or any other form of mail order sales nor to use in any form the mark, the name
or other distinctive marks of Tecnoalarm.
2. PURCHASE ORDERS
No purchase order of Tecnoalarm products sent by the Customer shall be binding for Tecnoalarm if not expressly accepted in writing by it. The order by
the buyer, accepted by the seller constitutes firm and irrevocable proposal of contract. Sending an order and collecting the goods by the buyer shall entail
the contextual, integral recognition, knowledge and acceptance of the terms and the attached warranty conditions. Tecnoalarm is not bound, except with
the express confirmation or subsequent ratification, by the declarations of its agents, business procurers, distributors and other commercial auxiliaries.
The acceptance without expressed reservation by the buyer of products non-compliant in terms of type or quantity, or sent with conditions other than those
contained in the request of the buyer or the offer of Tecnoalarm, implies the acceptance by the buyer of the supply and the terms proposed by Tecnoalarm.
These reservations, even if made in the form of clarifications or corrections to the terms of supply, shall not be effective if they will not be formulated by the
buyer in writing, immediately after the receipt of the goods.
3. ORDER PROCEDURES
Except as provided in the previous article, Tecnoalarm only accepts orders executed according to the procedures provided for in this article. All orders
must be submitted in writing and complete in every part needed for the correct identification of the requested Products. The Purchaser may request the
cancellation or modification of the order only before the execution of the same, through written communication. Tecnoalarm has the right to not accept
changes or cancellations of the order in relation to the state of progress of the order itself. The changes and the cancellation of the purchase orders, to be
effective, must be expressly accepted by Tecnoalarm in writing.
4. DELIVERY OF THE PRODUCTS
No purchase order of the products sent by the Customer will be fulfilled by Tecnoalarm if not expressly accepted. Unless otherwise agreed in writing between
the parties, Tecnoalarm shall deliver the products "ex works" (EXW), at the Tecnoalarm plant, its subsidiaries or its decentralised warehouses, within the
terms of delivery agreed on the acceptance of the order. If required, Tecnoalarm will take care of the transport of the products, choosing the carrier that it
deems appropriate in the absence of specific instructions of the Customer. Unless otherwise specifically agreed in writing, the transport will take place with
the clause "free on truck" at the expense and risk of the purchaser. The cost of the transport and the costs of packaging, unless otherwise agreed, will be
added to the price of the products purchased. The delivery deadline shall be deemed to be respected if the goods is promptly provided to the carrier. In any
case, Tecnoalarm shall not be liable for transport delays that cannot be imputed to it. In the case of delayed delivery, the buyer may cancel the part of the
order not delivered only after having communicated to Tecnoalarm, by registered letter with proof of receipt or with certified e-mail his intention to do so,
and after granting 15 weekdays, from receipt of such communication, within which Tecnoalarm can deliver all the products specified in the reminder and
not already delivered. However, it is excluded any liability of Tecnoalarm for damages derived from delayed or total or partial non-delivery of the purchase
order. The buyer that fails to collect the goods within the agreed time will have to repay to Tecnoalarm the storage costs of the goods until delivery or sale
to third parties of the goods, which may take place after thirty days from the originally agreed delivery date. Failure to fulfil or delayed fulfilment of a partial
delivery does not discharge from the obligation concerning the main delivery and will have no effect on other partial deliveries.
5. PRICES AND PAYMENT TERMS
The prices specified by Tecnoalarm in quotations, order confirmations and invoices are based on the price list expressed in Euros, excluding VAT, in force
on the day on which the order has been confirmed. Unless otherwise specified, all prices are net of transportation, and any other tax, fee and locally due
rate. The applicable taxes are those in force at the date of billing. Any value date discount on the prices charged by Tecnoalarm shall only be valid if agreed
to in writing and will be applicable only in case of full compliance with the payment terms fixed. In any event, any discounts offered will not be extendable to
supplies, also of similar goods or identical products, performed prior to or subsequent to the order to which the discount applies. If changes occur in the
costs of raw materials and/or the workforce used by Tecnoalarm, such as to change by more than 10% the original balance of the agreement, the price will
be adjusted in proportion, with the option of the parties to terminate the agreement within 10 days from the notice of the variation in the price. The invoices of
Tecnoalarm are accepted if they are not challenged in writing by the buyer within 14 days of their receipt. Unless otherwise specifically agreed in writing, the
method of payment and the related terms are those previously agreed with Tecnoalarm, as resulting from the relative "personal data". Any payments made
to the agents of Tecnoalarm should be previously authorized in writing by the latter. Otherwise, any payment made to subjects not previously authorized for
collection, shall not have the effect of settling the debt. Any instruments of credit accepted by Tecnoalarm is subject to collection. Any delay or irregularity
in the payment shall give Tecnoalarm the right to suspend deliveries and/or terminate the contracts and/or cancel orders in progress, even if not related
to the payments in question, and the right to compensation for any damages. From the date of expiry of the payment, the overdue interests at the legal
rate provided for in D. Lgs. 231/2002 as amended by D. Lgs 192/2012 shall be entirely due. In no event the buyer will be authorized to reduce or offset the
price with any credit, however occurring, against Tecnoalarm, unless prior written permission of the latter is granted. For the attribution of the payment,
reference will be made in each case to the provisions of art. 1193 co. 2 c.c.. The buyer is obliged to complete payment, even in the event of a dispute or
controversy, according to the condition "solve et repete".
6. RETENTION OF TITLE
In the case where the payment is carried out, in whole or in part, after delivery, the delivered products shall remain the property of Tecnoalarm up to the
full payment of the agreed price, within the meaning of article 1523 c.c.. Tecnoalarm shall have the right to repossess any product with retention of title
and the buyer shall bear the costs. Tecnoalarm may withhold as penalty any sum received as payment, without prejudice to the right to compensation for
the greater damage. Where the buyer relinquishes the products to any third party, the rights of Tecnoalarm shall be transferred to the price for the sale of
products up to the full payment.
7. DESCRIPTIONS AND TECHNICAL SPECIFICATIONS OF THE PRODUCTS
The technical data, dimensions, features, capacity, colours, weights, prices and any other data relating to the products contained in the technical and
advertising documentation of Tecnoalarm, as well as the characteristics of the samples and models which may be provided to the purchaser, are merely
indicative and are not binding, unless to the extent that they were expressly mentioned as such in the offer and/or in the written acceptance by Tecnoalarm.
Any statements or advertising of third parties in no way bind Tecnoalarm. Any design or technical document that enables to manufacture the products sold
or their parts provided to the purchaser remains the exclusive property of Tecnoalarm and shall not be copied, reproduced, transmitted to third parties or
however used without the prior written consent of Tecnoalarm, which also remains exclusive holder of each intellectual or industrial property rights relating
to the products. Tecnoalarm reserves the right, at its sole discretion and without the necessity of any notice, to make the changes deemed most appropriate
that do not adversely affect the functionality, the quality, and the aesthetics of the product itself, with the only obligation to inform the Customer about the
changes.
150
GENERAL SALES TERMS
8. GUARANTEE OF THE SELLER
Unless otherwise agreed in writing between the parties, Tecnoalarm ensures that its products (with the exclusion of those parts which are not directly
produced) are free from flaws/defects for a period of two (2) years from the date of delivery of the goods to the buyer. The warranty does not operate with
reference to those products whose defects are due to:
a. damage caused during transport
b. negligent use or improper handling of the same
c. failure to comply with the instructions of Tecnoalarm relating to the assembly and/or operation of the products
d. no ordinary maintenance and preservation of the products
e. normal wear and tear of moving parts
f. repairs and/or changes made by the buyer or by third parties without the prior written permission of Tecnoalarm.
Tecnoalarm will, in its sole discretion, replace or repair each product or parts of it that have defects, provided that the claim of the buyer is covered by
warranty and notified within the deadlines referred to in this article. The buyer shall notice, under penalty of loss of the right to appeal, Tecnoalarm about
the presence of defects within eight days from delivery of the products, in case of manifest defects, or within eight days from discovery in the case of
hidden defects or of defects not detectable by a person with average diligence. After the above deadlines have expired, the products are considered as
permanently accepted. Claims must be made in writing and must indicate in detail the alleged defects or non-conformities, as well as the references
to the relevant invoice, DDT or order confirmation by Tecnoalarm. In addition, upon request of Tecnoalarm, adequate photographic documentation must
be attached to the claims. Incomplete claims will not be covered by the warranty. The products subject to complaint should be immediately sent to the
headquarters of Tecnoalarm, or to any other place that the latter will indicate from time to time, with costs and expenses of exclusive responsibility of the
buyer, unless otherwise agreed between the parties, in order to allow Tecnoalarm to complete the necessary checks. This guarantee does not cover any
damage or defects of the products resulting from faults caused by, or related to, parts assembled/added directly by the buyer. If a claim is totally or partially
unfounded, the buyer shall indemnify Tecnoalarm of all the costs incurred for the checks. In every case, the buyer shall not assert any warranty rights
toward Tecnoalarm if the price of the products has not been paid according to the conditions and terms agreed. Tecnoalarm shall not be responsible for any
damage arising and/or connected to defects of the products, except in the case of serious malice or fault. In any case, Tecnoalarm shall not be liable for
incidental or consequential damages of any nature, such as losses arising from inactivity or loss of earnings of the buyer.
9. RESPONSIBILITY OF THE MANUFACTURER.
The products with Tecnoalarm brand are manufactured in accordance to the regulations in force in Italy and in the European Union. Tecnoalarm is
responsible for damages to persons or property arising from the products sold, only in the event of its proven gross negligence in the manufacture of the
products themselves. In no event, it shall be considered liable for incidental or consequential damages, loss of production or lost profits. Except as provided
above, the buyer shall not consider Tecnoalarm liable in all the actions of third parties based on liability arising from products sold to it and shall indemnify
the damage caused by the demands in question.
10. FORCE MAJEURE
In all cases of force majeure occurring (including but not limited to: lack of supply of raw materials, significant predictable increases of the same, fire, flood,
disturbances in the transport sector, strikes, lock-outs or other similar events, which prevent or reduce the productive capacity of Tecnoalarm or block
the transport between the plant of Tecnoalarm and the place of destination of the products), Tecnoalarm shall be entitled to an extension of up to 90 days,
extendible to up to 180 days in the most serious cases, of the deadline for the delivery of the products, provided that it promptly notices in writing the buyer
about the occurrence of force majeure. After the above time limits and subsisting the condition of force majeure, the buyer may terminate this agreement
by giving written notice to Tecnoalarm by means of registered letter with proof of receipt or certified e-mail.
11. CHANGES AND INTERPRETATION OF THE TERMS
For the interpretation of these terms, only the original Italian text shall be considered legally binding. Every reference to documents such as price lists,
general terms of sale or other material from Tecnoalarm or third parties is meant as referring to the above mentioned documents in force at the time of
the reference itself, unless otherwise specified. Any modification or integration made by the parties to the agreements to which these terms apply, must
be made in writing, otherwise they will be void. The derogation to one or more provisions of these terms should not be interpreted extensively or by analogy
and does not imply the desire to waive the terms in their entirety.
12. APPLICABLE LAW
For whatever not expressly provided in these terms, the rules laid down by the Italian law, or, alternatively, the uses and practices, shall apply. In the case of
international sale, the terms and conditions of sale, for whatever not explicitly regulated by these terms, will be governed by the Vienna Convention of 1980
on the international sale of goods. In order to interpret the terms of return and other commercial terms possibly used by the parties, the Incoterms of the
International Chamber of Commerce in Paris apply. Any foreign uses and conventions are not binding in any way for Tecnoalarm.
13. DISPUTES AND COMPETENT COURT
For any disputes regarding or in any way connected to the agreements to which these terms apply, the only competent Court is that of Turin, Italy.
14. CONFIDENTIALITY
Any production technology and/or information of the parties (including expedients, design and information) whether or not patented, shall be treated as
essentially confidential and shall not be used or disclosed in the absence of prior written permission.
15. FINAL PROVISIONS
Any communication between the Parties shall be sent to the respective addresses resulting from the business correspondence exchanged.
If Tecnoalarm fails to:
a. have one of the following terms executed
b. require to the buyer to perform any provision of these terms, this may not be construed as present or future waiver of that provision, nor in any way affect
the right of Tecnoalarm to have each of the provisions executed in the future.
The express waiver by Tecnoalarm of any of the provisions of these terms does not constitute a waiver to their future respect by the buyer. This agreement
may not be transferred in whole or in part without the prior consent of the other party.
Tecnoalarm S.r.l.
151
NOTES
152

RSC® technology

Transcription

Similar documents

Help the Silly Bus kids get to school!

Croydon Community Bus flyer merton

How to reach Microcity from the train station by bus

Practice 1.3 KEY

Holiday Houses Costa Brava Airport bus to Barcelona

Orihuela Costa // Las Chismosas

Pilgrimage Poster

Walking Bus Forum Wolverhampton Wanderers Molineux Stadium The

ETEX Brochure

directions to timber bush trackplot