Shot Blasting Systems

Shot Blasting Systems
TRUCK MOUNTED
2-45DTM
Blastrac’s 2-45DTM truck-mounted shot blaster
is one of the most adaptable and productive of
the large horizontal blast cleaning machines in
our equipment line. The DOT highway approved
vehicle is completely self-contained and specifically
designed for surface preparation specialists
doing jobs that require limited downtime, such
as airports, highways, bridges and other large
projects. The 2-45DTM provides a virtually dustfree, environmentally friendly work environment
for the operator and others on the same site.
Specialty contractors can drive to the job with all
equipment, personnel, and supplies safely in a
single vehicle. All controls, dust collection, spares,
consumables, and the blast head, are protected in
an enclosed truck body equipped with a lift-gate.
Work is started after quick mounting of the blast
head, converting the over-the-road
vehicle to effective work machine.
The 2-45DTM shot blaster is perfectly
suited for road maintenance, asphalt
retexturing, bridge deck preparation,
airport maintenance and much more.
It is also designed for skid resistance
enhancement on roads, bridges, and
runways. Road/runway markings
removal or compounded-rubber
removal can also be completed with
virtually no dust, debris or water.
Contact us for more information on
shot blasting products, applications,
and education/training assistance
from qualified Blastrac personnel.
The remarkable 2-45DTM converts
from a transport to a high production,
environmentally friendly, shot
blasting road machine.
SPECIFICATIONS:
Blast Wheel Power:
2, 40 hp (30kW) hydraulic motors
Work Speed: Max up to 3 mph (4.7 km/hr)
Working Width: 45 in. (1150 mm)
Blast Head Weight: 3,858 lbs (1,750 kg)
Dimensions: L 59 in. x W 51 in. x H 51 in.
(1500mm x 1300mm x 1300mm)
Blasting Capacity: Up to 38,750 sq.ft./hr
(3600 m2/hr) on concrete
Working Areas: Very large horizontal
surfaces−ramps, highways, bridges,
airport runways and taxiways
FEATURES:
• Prepares up to 38,750 sq.ft./hr
(3600 m2/hr) on concrete or asphalt
(relevant to hardness and asphalt mix)
• Magnetic/air-wash dust collection
system for separating contaminants
from abrasives with containment
and disposal of debris
• 2, 40HP (30kW) hydraulic blast motors
• Versatile, heavy duty and highly
productive machine
• Flexible use for any job site, no
trailers or special transport required
• Designed for optimum use on asphalt
and concrete surfaces
• Uniform 45 in. blast pattern for
consistent results
PACKAGE OPTIONS:
A. 2-45D Package: Includes blast head;
dust collector and blower; adaptor
kit for rear or front mount: To be
assembled by a certified hydraulic
specialist on a customer’s vehicle that
will meet or exceed Blastrac’s criteria.
B. 2-45DTM Turnkey Package: as above
(2-45D) and also includes truck
with full assembly by Blastrac
factory specialists.
Starter Kit: Initial charge of steel
abrasive, magnetic broom 32
in. (800 mm) and blast head
The Trusted Choice of Professionals for Over 30 Years
maintenance kit.
Always wear appropriate eye, ear and respiratory protection for the application, as specified by OSHA regulations and
your employer. Never operate or maintain equipment before reading and understanding the instructions for operation
and maintenance. Obey all safety signs and instructions while operating or maintaining equipment.
1-866-669-6643 or 905-624-7373 • BLASTRAC.ca
Products manufactured and marketed by Blastrac are protected by patents issued or pending in the United States and other countries. Blastrac reserves the right to change the
specifications referred to in this literature at any time, without prior notice. Blastrac is a registered trademark owned by Blastrac, NA.
© 2015 Blastrac, NA
All rights reserved. V0215