Safety - TransQuip

Transcription

Safety - TransQuip

Safety
Including :
Vehicle Safety
Personal Safety
Vehicle Safety Gear
Vehicle
Safety Gear
Striking design complies with
safety regulations
Robust non-rusting alloy or plastic panels
OVERDIMENSION SAFETY GEAR
Double or single-sided options
Eye-catching, sturdy and long lasting, our Overdimension Gear range has everything you need
(from fluorescent flags to flashing lights) to ensure your big loads and vehicles are legal.
With our gear you’ll be:
• Buying direct from the hazard panel manufacturer and saving money.
• Assured you’re receiving products that are in line with the NZ regulations.
‘SENTINEL’ HAZARD PANELS - BUY DIRECT OFF THE MANUFACTURER
LH
LH
3
RH
RH
Part
Number
Description
9206L
Left
9206R
Right
Single sided hazard panel for
day / night use on alloy panel,
left or right hand.
9207
Double sided hazard panel for
day / night use on alloy panel.
9218
plastic
Single sided hazard panel for
day / night use on plastic panel.
9219
plastic
Double sided hazard panel for
day / night use on plastic panel.
9208L
Left
9208R
Right
Adhesive label only, day / night
material. Left and right hand.
9256L
Left
9256R
Right
Hazard panel for day/night use on
alloy panel. Left or right hand and
single sided or double sided option.
Note this size panel has restricted
use.
Size
400mm x
300mm
600mm x
200mm
9257
Double
sided
For expert advice contact us now: FREEPHONE 0508 31 31 31, FREEFAX 0508 41 41 41,
FLAGS - AVAILABLE IN SINGLES OR SETS
Part
Number
Description
9199
Fluro vinyl flag with orange stripe.
9200
Fluro vinyl eyelet flag with a rope border. Has an
eyelet in each corner for easy attachment.
Size
400mm x
300mm
9201
Fluro vinyl eyelet flag with a rope border and
two bungy cords for easy securing.
9202
Bungy cords for securing flags.
9203
Fluro vinyl pole flag with a rope border. Has a
‘sleeve’ down one side to slide a pole into.
N/A
400mm x
300mm
9205
Fluro vinyl pole flag with a rope border and alloy
handle fitted.
9209
Retro reflective flag for day / night use with
eyelets.
400mm x
300mm
9238
9239
Karabiner – ideal for clipping flags onto your
load. In 2 sizes.
6mm
8mm
EMAIL [email protected], or check out our WEBSITE: www.transquip.co.nz
Vehicle
Safety Gear
4
OVERDIMENSION SIGNS
Vehicle
Safety Gear
Part
Number
Description
Size (mm)
9210
OVERSIZE panel for day / night use.
1100 x
300mm
9212
OVERSIZE roll up vinyl sign with eyelets,
Complete with bag for easy storage.
1100 x
300mm
9213
OVER panel for day / night use.
550 x
300mm
9215
SIZE panel for day / night use.
550 x
300mm
9217
Slow Moving triangle panel.
360 x
400mm
9220
PILOT VEHICLE panel for day / night use.
1100 x
520mm
9222
WIDE LOAD FOLLOWS panel for day / night
use.
1100 x
520mm
9224
WIDE LOAD FOLLOWS / PILOT VEHICLE,
double sided panel for day / night use.
1100 x
520mm
9224F
WIDE LOAD FOLLOWS / PILOT VEHICLE,
double sided folding sign for day / night use.
9227
STOP / SLOW sign on handle.
300mm
dia.
9225-4
Covering words panel, to use over existing sign.
Examples: “LONG”, “WIDE”, “AHEAD”,
“FOLLOWS”.
550 x
180mm
4 symbols
9225-5
5 symbols
960 x
180mm
A wide range of signs with other messages also available
5
OVERDIMENSION ACCESSORIES
Part
Number
Description
9229
Set of 3 highly reflective warning triangles. Packed in a heavy
duty container for storage.
9230
Hand held wand with solid or flashing light. Powered by ‘D’
batteries (not included – see page 179 for batteries).
9232
White gloves to meet Oversize Pilot requirements.
9233
Red
Self powered LED Marker lamp. Powered by ‘AAA’ batteries
(2 supplied). 6 function modes, wide angle beam. Includes
clip. Red and amber options. 65mm wide x 40mm high.
9234
Amber
OTHER VEHICLE MOUNTED SIGNAGE TO KEEP YOUR TRUCK SAFE AND LEGAL
Part
Number
Description
Size (mm)
9236
DO NOT OVERTAKE TURNING VEHICLE
Pair of adhesive signs.
400mm x
400mm
9237
IF YOU CAN’T SEE MY MIRRORS
Adhesive sign.
450mm x
300mm
9330
Dangerous Goods sign with various messages,
adhesive vinyl. Full range available.
250mm x
250mm
9331
Dangerous Goods flip signs with 15 messages
plus ‘Drive Safely’.
350mm x
350mm
9332
Dangerous Goods sign holder to fit 295 x
295mm signs.
300mm x
300mm
9334
Magnetic Dangerous Goods sign backing.
300mm x
300mm
Vehicle
Safety Gear
(Continued)
6
OTHER VEHICLE MOUNTED SIGNAGE CONTINUED
Vehicle
Safety Gear
Part
Number
Description
Size (mm)
9340
Dangerous Goods sign with various messages,
PVC. Full range available.
295mm x
295mm
9360
Dangerous Goods Documents Bag with
velcro to stick on door.
270mm x
315mm
9336
Adhesive label for diesel tanks.
Choose from 3 sizes to suit your tank size.
450+ Litre
tank.
9336-5
5-25 Litre
tank.
9336-25
25-450 Litre
tank.
9369
Emergency Exit double sided label.
Super bright LEDs…
attract maximum attention
Fit and forget! Long light LEDs.
FLASHING LIGHTS - LIGHT BARS
Our Light Bars (or Barlights) are well designed –
we have low profile options to limit wind drag,
360º flashers to eliminate blind spots, and permanent
or magnetic mounting options.
LED - extremely low
power draw. Save your
fuel, battery and the
environment!
You’ll also find we offer:
• A range in lengths – from 248mm to 1.2 metres.
• Both halogen and LED technology, with a range of flashing options.
• Bright fluorescent colours to keep your site safe.
• Cost-effective barlights that are built tough and long lasting.
7
SENTINEL LED BARLIGHTS
Top quality range of barlights you can fit and forget! All made to SAE Class 1 standard.
Part
Number
9902-4
9902-M
9892-2
clear lens
9892-2A
amber lens
9892-4
clear lens
9892-4A
amber lens
9892-M
clear lens
9892-MA
amber lens
9892-2BMK
Description
Size
Mounting
Compact option that is small
enough to fit in your glovebox!
Environmentally friendly. Save
your battery and your fuel - very
low current draw so you can
leave these flashing without
idling your vehicles all the time!
All SAE Class 1 compliant
with very bright amber LEDs.
Radio interference free. 19
flash patterns that can be
synchronised to flash together.
2 mounting options available,
with one mounting option
supplied with the bar light.
Multi-voltage - 12 and 24 volt.
Tough polycarbonate lens.
248mm
long
x 172mm
wide x
37mm high
Permanent
mounting
bracket for 4
bolt holes.
Popular size with amber or
clear lens options. Environmentally friendly. Save your
battery and your fuel - very low
current draw so you can leave
these flashing without idling
your vehicles all the time!
All SAE Class 1 compliant with
very bright amber LEDs. Radio
interference free. 19 flash
patterns that can be
3 mounting options available
420mm
long
x 160mm
wide x
75mm high
Magnetic pads
and curly cord
with cigarette
lighter plug.
Permanent
mounting
bracket for 4
bolt holes.
Magnetic pads
and curly cord
with cigarette
lighter plug.
Permanent mounting brackets
for 9892 series mini barlights.
Set of 2 brackets. ‘2 bolt’ and
‘4 bolt’ options.
2 hole kit.
9892-4B
9862-2
9862-4
9862-M
Permanent
mounting
bracket for 2
bolt holes.
4 hole kit.
Very popular ‘Falcon’ mini
barlight. Environmentally
friendly. Save your battery and
your fuel - very low current
draw so you can leave these
flashing without idling your
vehicles all the time!
All SAE Class 1 compliant
with very bright amber LEDs.
Radio interference free. 19
flash patterns that can be
3 mounting options available
Red options also available.
422mm
long
x 278mm
wide x
65mm high
Permanent
mounting
bracket for 2
bolt holes.
Permanent
mounting
bracket for 4
bolt holes.
Magnetic pads
and curly cord
with cigarette
lighter plug.
Vehicle
Safety Gear
8
SENTINEL LED BARLIGHTS CONTINUED
Part
Number
Description
9860-2B
Permanent mounting brackets
for 9862 series mini barlights.
Set of 2. ‘2 bolt’ and ‘4 bolt’
options.
Vehicle
Safety Gear
Size
Mounting
2 hole kit.
9860-4B
4 hole kit.
9860 - MK
Magnetic mounting kit for
9862 series mini barlights.
Set of 2.
9869
Amber lens for 9862 series
mini barlights.
9056
Amber LED mini barlight
with high intensity LEDs meets SAE Class 1 standard.
Environmentally friendly - save
your battery and your fuel,
very low current draw so
you can leave these flashing
without idling your vehicle all
the time! 17 flash patterns
including rotating patterns.
Available in permanent mount,
or with a magnetic base and
curly cord with cigarette
lighter plug. Multivolt - 12 and
24 volt.
400mm long
x 200mm
wide x 65mm
high
(+ mounting
height)
Part
Number
Description
Size (mm)
9057
Excellent value and smart
looking, high intensity LED
barlights in 2 sizes with
permanent mount brackets
included. Made to SAE
Class 1 standard. Tough
polycarbonate base and lens
and water proof IP67 rating.
Multivolt for 12 and 24 volt
use. Amber LEDs. Multiple
flashing patterns. Clear and
amber lens available.
694mm long
x 305mm wide
x 121mm high
(height including mount).
LED full length barlight with
extruded alloy housing
and polycarbonate lens.
Selectable flash patterns.
Purple lens also available for
oversize load piloting.
1200mm long
x 310mm wide
x 128mm high
(height including brackets).
9056M
Magnetic
pads.
Permanent
Magnetic
LED BARLIGHTS
9058
9052
9
1194mm long
x 305mm wide
x 121mm high
(height including mount).
ECONOMY RANGE LED MINI BARLIGHTS
Part
Number
Description
Mounting
Voltage
9090MA
amber lens
High power amber LEDs.
Available in clear lens or
amber lens options.
305mm long x 160mm wide x
78mm high.
Magnetic mounting with
curly cord and cigarette
lighter plug or permanent
mount options.
Multivolt - 12 and 24 volt.
Magnetic
12/24 Volt
Magnetic
12/24 Volt
Permanent
12/24 Volt
Permanent
12/24 Volt
Popular shape. High power
amber LEDs. Tough clear
polycarbonate lens.
440mm long x 220mm wide
x 75mm high.
Magnetic mounting complete
with curly cord and cigarette
lighter plug, or permanent
mount option. Multivolt 12 and 24 volt.
Magnetic
12/24 Volt
Permanent
12/24 Volt
Eco amber LED mini barlight
that meets SAE Class 2.
Multiple flash patterns.
Multivolt - 12 and 24 volt.
Permanent or magnetic
options with amber or clear
polycarbonate lens.
380mm long x 230mm wide
x 65mm high.
Permanent
12/24 Volt
9090MC
clear lens
9090PA
amber lens
9090PC
clear lens
9063M
9063P
9047
9047M
Magnetic
12/24 Volt
Vehicle
Safety Gear
10
MINI HALOGEN BARLIGHTS
Vehicle
Safety Gear
Part
Number
Description
Voltage
Size (mm)
9836
Britax barlight with 2
rotators and distinctive
amber lens. Gear driven
model. Permanent mount.
Halogen bulbs included.
12 Volt
420mm long x
205mm wide x
133mm high
Britax barlight with magnetic
base and rubber suction
pads. Ideal for temporary
use applications. Includes
cigarette lighter plug on cord
for quick ‘power up.’ Belt
driven option. Halogen bulbs
included.
12 Volt
9848
Amber lens to fit Britax
barlight .
NA
420mm long
9849
Magenta lens to fit Britax
barlight.
NA
420mm long
9140
Permanent mount Vision
Alert barlight with twin rotators. Amber lens, belt driven.
Halogen bulbs included.
12 Volt
400mm long x
210mm wide x
115mm high
Magnetic base Vision Alert
barlight. Ideal for temporary use applications.
Includes cigarette light plug
on a lead. Halogen bulbs
included.
12 Volt
Amber lens to fit Vision Alert
barlight.
NA
9837
9840
9841
9141
9142
9143
9144
11
24 Volt
420mm long x
205mm wide x
183mm high
24 Volt
24 Volt
400mm long x
210mm wide x
220mm high
24 Volt
400mm long
Mount your signage or light bars the easy way!
Make your vehicle even more
productive... fit roof racks.
Extremely versatile
system. Interchange
between vehicles with
a minimum of fuss.
ROOF RACKS – CARRY YOUR LOAD ON THE WORLDS QUIETEST,
MOST TECHNICALLY ADVANCED SYSTEM
Part
Number
Description
Mounting
type
Size (mm)
Many
options
available
Whispbar Proracks – the
ideal way to mount barlights,
signage, or to simply help
carry your ute, car or vans
load. Interchangeable
system that allows the same
crossbar to be swapped
between different vehicles.
Simply choose from a wider
type ‘through’ blade or
a narrower ‘flush’ blade,
then add the fitting kit for
mounting it to your vehicle.
Traditional Prorack roof rack
systems also available.
through
blade
Many options
available from
1100mm to
1500mm
flush blade
Many options
available from
750mm to
1150mm
mounting kit
to fit racks
to specific
vehicle
NA
Many
options
available
Many
options
available
Vehicle
Safety Gear
Call us now with your requirements.
12
Bright beams the ultimate in safety.
Vehicle
Safety Gear
LED units are waterproof, durable
and have very low current draw.
Top quality halogen and
LED options in stock
FLASHING LIGHTS - BEACONS
We have an enormous range of beacon lights and accessories…one for every use and budget.
We’re happy to talk you through the pros and cons of all the options we have available, including:
• LED beacons which are environmentally friendly - save vehicle emissions, fuel and your battery!
You can leave LED beacons flashing without leaving your vehicle idling all the time!
Many LEDs are also multivoltage and have multiple flashing patterns.
• Traditional halogen ‘rotating’ beacons that produce a very bright light. These can be
driven by rubber belts, gears or by direct friction.
You can also choose from a range of mounting options, including:
• Permanent fixtures – ideal when the beacon does not need to be moved.
• Magnetic bases – perfect for temporary use, these are powered through a vehicle’s
cigarette lighter.
• Pole mounted – the best solution for situations where lights may be knocked about or need to
be removed regularly. We even have flexi-poles, which will move if the beacon’s struck, giving
it extra protection.
LED BEACONS – BRIGHT AND TOUGH!
Part
Number
Description
Mounting
type
Size (mm)
9760
High intensity 3 Watt LED
beacon which meets
many standards including
SAE Class 1 and ECE
R65. Multivolt system
and various flash patterns
including rotating. Tough
alloy base. 3 mounting
options.
Permanent
mount
137mm high x
164mm diameter
Magnetic
base
137mm high x
164mm diameter
Flexi Pole
mount
216mm high x
140mm diameter
9761
9763
13
LED BEACONS – CONTINUED
Part
Number
Description
Mounting
type
Size (mm)
9750
Mid range LED beacons.
Bright 1 Watt LEDs which
meet SAE Class II and
CE. Multivolt 12-24 volt
system. 3 mounting
options.
Permanent
mount
118mm high x
165mm diameter
Magnetic
base
118mm high x
165mm diameter
Flexi Pole
mount
188mm high x
140mm diameter
9751
9753
9080
Economy LED beacon
Multivolt
Permanent
mount
125mm high x
120mm diameter
9081
Economy LED beacon
Multivolt
Magnetic
mount
125mm high x
125mm diameter
9083
Economy LED beacon
Multivolt
Flexi Pole
mount
203mm high x
116mm diameter
9085
Economy LED beacon
with 30 LEDs. 10 -30 volts.
Compact size.
Permanent
mount
95mm high x
90mm diameter
9086
9132
Magnetic
mount
LED strobe beacon, ideal
size for forklifts with tough
amber polycarbonate lens.
Single flash pattern.
12 - 110 Volts.
Permanent
mount
130mm high x
72mm diameter
(base)
BATTERY POWERED LED BEACON - CONVENIENT PORTABLE WARNING LIGHT!
Part
Number
Description
Mounting
type
Size (mm)
9157
Battery powered LED
beacon. Ideal for a flashing
light away from a power
source. Includes an inbuilt
light sensor, off/on switch,
and magnetic base for
easy placement on metal
surfaces.
Magnetic
base
119mm high x
106mm diameter
Vehicle
Safety Gear
14
BRITAX ROTATING BEACONS – QUALITY YOU CAN RELY ON!
Part
Number
Description
Mounting type
Size
9800
Premier rotating
beacon range, with
polycarbonate amber
lens. Dual Voltage with
belt drive for quiet
operation. Change from
12 to 24 volt by moving
belt. Halogen bulb
supplied separately.
3 bolt
179mm high
x 153 mm
diameter
Magnetic base
with suction pad
182mm high
x 155 base
diameter
9820
Flexi pole mount
290mm high
x 149mm
diameter
9821
Pole mount
236mm high
x 149mm
diameter
Vehicle
Safety Gear
9810
EUROPEAN MADE ECONOMY ROTATING BEACON
Part
Number
Description
Mounting type
Voltage
9700-M
Rotating beacon range
with clear amber lens.
Available as Dual Voltage
without bulb. Belt driven.
Very good value!
3 bolt,
permanent
mount.
Dual Voltage,
bulb supplied
separately.
9701-M
Magnetic Base
mount, curly
cord and plug.
Dual Voltage,
bulb supplied
separately.
9702-M
Pole mount.
Dual Voltage,
bulb supplied
separately.
9703-M
Flexi pole
mount.
Dual Voltage,
bulb supplied
separately.
9709
Lens to fit beacons
above.
N/A
Large range of electrical products in the Lighting & Electrical section on pages 30 to 53.
15
GOOD ALL ROUNDER! UK MADE ROTATING BEACON WITH DIRECT FRICTION DRIVE.
Part
Number
Description
Mounting type
9000
Amber rotating beacon that can take
a 12 or 24 volt halogen bulb (supplied
separately). Non fading and non crazing
lens.
3 bolt,
permanent
mount.
9001
Magnetic base
with curly cord
and plug.
9003
Flexi pole
mount.
ACCESSORIES –
GEAR TO MAKE IT EASIER
TO FIT FLASHING LIGHTS.
Rubber bung
to keep out the
weather when
it’s not in use.
Easy-to-use pole mount
bracket – just slide on
the beacon and it’s
ready to use.
Part
Number
Description
9150
Tube type pole mount bracket.
9151
Pole mount with flat round plate for bolting onto a surface.
9152
Pole mount with 2 tab mounts for bolting onto a surface.
9153
L bracket readymade for mounting beacons quickly and
easily.
9154
Pole mount with side mount bracket.
9155
Pole mount with screw thread.
9156
Pole mount with swivel joint adjustment and mounting
bracket.
Tough,
long–lasting
metal
Vehicle
Safety Gear
9879
Magnetic mounting bracket with suction base.
16
HALOGEN BULBS
Vehicle
Safety Gear
Part
Number
Description
Voltage
4500
4510
H1 halogen bulb for beacons and
barlights, ready to fit. 12 volt and 24 volt
options.
12 volt, 55 watt
24 volt, 70 watt
Large range of electrical products in the Lighting & Electrical section on pages 30 to 53.
DIRECTIONAL LED FLASHING LIGHTS
Part
Number
Description
Size
9110
Amber
9111
Red
9112
White
High intensity light head with multiple flash
patterns. 11 – 30 volts. Very bright and very
compact. Can be synchronised to flash
together and can flash simultaneously or
alternately. Available in 2 sizes - 3 LEDs and
6 LEDs. SAE Class 1 compliant. Amber, Red
and White LED options.
85mm long x
27mm wide x
16mm high
9113
Amber
9114
Red
9115
White
17
128mm long x
27mm wide x
16mm high
9116
Amber
9117
Red
9119
White
High intensity light head with 12 LEDs and
25 flash patterns. Multivolt 12 - 24 volt.
Very bright yet compact. Multiple units
can be synchronised to flash together simultaneously or alternatively.
SAE Class 1 compliant, tough and reliable.
Amber, Red and White LED options.
132mm long x
49mm wide x
19mm high
9135
White
9136
Amber
9137
Red
High intensity light heads in 3 colours:
Amber, Red and White. Weatherproof and
vibration resistant. Multivolt 11-30 VDC with
19 built-in selectable flash patterns.
122mm long x
41mm wide x
30mm high
DIRECTIONAL LED FLASHING LIGHTS CONTINUED
Part
Number
Description
Size
9880L
‘L’ bracket
mount
Amber
High power lighthead with 4 LEDs and
choice of 2 types of mounting brackets.
Compact unit with a robust alloy housing.
Tough, weather-proof and vibration
resistant. 12 – 24 volt with 17 flash patterns
and 2 steady burn. Can be synchronised to
flash together. Available in 3 colours: Amber,
Red and White.
Head size is
85mm wide x
72mm high
9118
Compact Pop-a-light. Very bright little
flashing light that can be mounted through
a surface hole. 10 – 16 volts with 19
selectable flash patterns. Comes in a kit of
2 lights with complete wiring. Weatherproof
and vibration resistant.
Overall light
head size
28mm
diameter
x 30mm high
9118B
Bracket mount for mounting 9118 lights.
Black or chrome options.
9125
Amber
9126
Magenta
9127
Red
Ideal for quick mounting - window mount
flashing light with suction mounts and
switched cigarette lighter plug on a 2.7m
cable. Multivolt 12 – 24 volt. Very bright
intensity LEDs. Made to meet SAE Class 1.
Multiple flashing patterns, and swivel head
to direct flashing. Available in Amber, Red
or Magenta. Kit also includes a bracket for
mounting these in the grille.
9880U
‘U’ bracket
mount
Amber
9881 Red
9882 White
Overall size
159mm wide x
53mm high x
88mm deep
9126
SOLAR POWERED LED SAFETY MARKER LIGHTS
A tough alloy solar power light that has been adapted to 3 different uses: road studs, ice
detection markers and marker lamps. Environmentally friendly and safety compliant.
Part
Number
Description
9510
Yellow
Mark out your carpark or worksite with these smart road
studs. They have 800 metre visibility and one 8 hour charge
provides over 100 hours of continuous light! Made with tough
alloy body, 4 super bright LEDs in Amber, Red or White.
Waterproof rating of IP68 and hold weight of 25 tons. Size is
100mm x 100mm x 20mm. Flashing or static options.
9511
Red
Vehicle
Safety Gear
9512
White
18
SOLAR POWERED LED SAFETY MARKER LIGHTS CONTINUED
Vehicle
Safety Gear
Part
Number
Description
9515
Blue
Ice detection marker lamp - solar powered LEDs. Enhance
safety levels dramatically - when ice is detected this flashes
a blue warning light to warn of ice and slippery conditions!
Ideal for walkways, steps, paving areas, car parks, roads etc.
Solar powered - an 8 hour charge provides over 300 hours of
operation. Tough, waterproof and environmentally friendly
Size is 120mm x 130mm x 25mm high
9517
Red
Red solar powered night safety light. Ideal for marking
vehicles, rubbish skips, containers... the list is endless! 500m
visibility, tough alloy body with hold weight of 25 tons, IP
rating of IP67. 8 hours of (free) charging provides 72 hours
operation. Size 103mm x 103mm x 25mm.
STROBE BEACONS – IDEAL FOR FORKLIFTS
Part
Number
Description
Size
9130
Reliable, maintenance free strobe lights
with a wide voltage range of 12 – 110
VDC. Low power consumption. Vibration
protected circuitry. See also LED option
for forklifts on page 14
95mm high x
130mm diameter
base
9131
9158
19
140 x 58mm
base x 67mm
high
Strobe light tube, 12 – 110 VDC.
N/A
FLARE ALERT BEACONS
Part
Number
Description
Power Source
9502
amber
9503
red
Flare Alert LED Marker beacon with
magnetic base. 2 functions. Powered
by ‘AA’ batteries, range of fittings also
available as follows.
AA
batteries
(supplied
separately)
9504
Weighted base for flare alert beacon.
NA
9505
Cone adaptor for flare alert beacon.
NA
9507
carry 3
9508
carry 8
Carry case for Flare Alert beacons.
Option of case to carry 3 or 8 units.
NA
REFLECTIVE TAPE – MAKE YOUR GEAR STAND OUT AND MINIMIZE
THE RISK OF ACCIDENTS
Part
Number
Description
Size
Colour(s)
9260
Reflective Tape with wide angle
reflective performance, solvent
and impact resistant. Cut to
any length you require.
50mm wide
Plain yellow
9261
Plain white
9262
Plain red
9266
Red / white
9267
Blue / white
9269
Red / gold
on angle
3536
Anti slip tape with adhesive.
Cut to any length you require.
Ideal for floor tape or on the
front edge of stairs.
50mm wide
Black
Vehicle
Safety Gear
Other sizes and colours also available.
20
Personal
Safety Gear
SAFETY CLOTHING
We stock the clothing you’ll need to keep you and your workers safe,
comfortable and compliant including:
• High visibility overalls, vests, jackets, shirts and trousers
• Top quality safety boots and gumboots
• Hearing, eye protection and dustmasks
• Gloves, hand sanitiser and sunscreen
Bright fluorescent
colours ensure you and
your workers are seen
Legally compliant
Well made and durable
21
SAFETY VESTS – KEEP SAFE AND LEGAL! NO SLEEVES ALLOWS EASY
ARM MOVEMENT WHILE WORKING
Part
Number
Description
Sizes
9467D
(dome)
9467Z
(zip)
Fluro Safety Vest with reflective strips for
day / night use. Dome or Zip.
Medium to
5XL
9470
STMS fluro Safety Vest in yellow.
9453
Keep safe and cozy! Thermal fluro vest
with reflective tape. Lined side pockets and
handy front pockets. Meets highway use
specs.
HIGH VISIBILITY TOPS – GOOD LOOKING GEAR TO KEEP YOU SAFE
Part
Number
Description
Size
9415
Hi Vis singlet
Small to 5XL
9417
Hi Vis tee-shirt
9418
Hi Vis Polo shirt
9472
Long Sleeved TTMC-W Polo
• Wicks moisture to top of fabric allowing
quick evaporation
• External pocket with velcro closure
• High ultra violet protection in accordance
with AS/NZS4399
• Plans and cellphone pocket
• Day/night compliant
• Material complies with: AS/NZS
1906.4.2010 and EN 471
S-3XL,
5XL
and 8XL
9476
TTMC Industrial Shirt
• Button front closure
• Two chest pockets, pen partition
• UltraFlect reflective tape for superior
visibility
• Temporary Traffic Management Compliant
• Day/night compliant, transit compliant
• Design complies with: AS/NZS
4602.1.2011
S-4XL
Personal
Safety Gear
22
OVERALLS – WORK GEAR IN PLAIN OR FLURO OPTIONS
Personal
Safety Gear
Part
Number
Description
Colours
Sizes
9480C
Cotton
• Overalls and Safety Vest in
one!
• Fluro top with long tail and
reflective tape to meet.
TTMC day/night standard
• 300gsm polycotton, vislon
(plastic) zip.
• Many useful pockets.
• Stress points bar-tacked.
Navy and
Hi Vis
orange
3 – 14
and 16
• Popular 270gsm polycotton
overalls.
• Made tough to withstand
heavy industrial use and
commercial laundering.
Royal
Spruce
Red
Charcoal
White
Orange
Navy
4 – 14
9480PC
Polycotton
9490C
Cotton
9490PC
Polycotton
TROUSERS
23
Part
Number
Description
Sizes
9479
Smart looking reflective long trousers:
• 280 GSM polycotton trousers.
• UltraFlect reflective tape -durable and
highly visible.
• Internal kneepad pocket.
• Ruler/tool pocket, many other pockets.
• All stress points bar-tacked.
• Plain front for modern look & feel.
• Yellow/grey also available.
82, 87, 92,
97, 102,
107, 112,
and 117.
9478
Industry cotton cargo pants:
• Protect your knees double thickness knees.
• Metal free - suited for the electrical
industry.
• Many pockets for multi purposes.
• Button waist closure.
• All stress points bar-tacked.
• Black or Navy available.
77, 82, 87,
92, 97,
102, 107,
112, 117,
and 122.
9477
Industry long trousers with reflective strip:
• Single band of UltraFlect reflective tape
above knees.
• Metal free - suited for the electrical
industry.
• Heavy duty vision zip.
• Many pockets for multi purposes.
• Button waist closure.
• Black or Navy available.
Many sizes
from
77 – 122
SAFETY BOOTS
Part
Number
Description
Type
Sizes
9402
Black leather upper boot:
• Dual density PU/TPU sole for
comfort and long term wear.
• Resistant to oil, acid and heat.
Elastic
pull-on
5 – 13
9406
Black leather upper boot:
• PU/TPU outsole providing high
abrasion resistance.
• Steel toe cap.
• TPU ankle and heel support.
Elastic
pull-on
5, 6, 6.5
and
7 – 12
9407
Black leather upper lace-up
boot:
• Tunnel tread technology to
expel water.
• Downward facing seams for
water resistance.
• TPU ankle and heel support.
• Safe low-profile scuff cap.
• Breathable, MoistDispel lining.
• High resistance outsole.
• Superior quality.
Lace up
5, 6, 6.5
and
7 – 12
9408
High leg, brown lightweight
leather upper boot:
• Steel toe cap with rubber
scuff cap.
• Steel midsole.
• Hard wearing TPU sole.
• Heel and ankle support.
Lace up
4, 6, 6.5
and
7 – 12
9409
Neo Rubber Gumboot:
• Made of a blend of neoprene
and high density rubber.
• Steel toe.
• Oil and fuel resistant.
Gumboot
8 – 13
9410
PVC Safety Gumboot:
• Flexible composition.
• Arch support for comfort.
• Double thickness PVC.
covering sensitive areas of
foot.
• Resistant to animal fats, oils
and acids.
• Rigid upper will not drape
whilst remaining flexible.
• Superior quality.
Gumboot
4 – 13
9403
Lace up
Personal
Safety Gear
24
WET WEATHER GEAR
Part
Number
Description
Sizes
9473
The ultimate 5 in 1 jacket & vest combo!
• Inner vest - day/night vest without sleeves.
• Inner vest with sleeves - add zip on/off
sleeves to combat the cold.
• Outer jacket - waterproof outer jacket,
packed with innovative features, including
a concealed, fully lined hood.
• Outer jacket + inner vest - add more
warmth to your jacket with the fleece liner.
• Outer jacket + inner vest with sleeves - the
ultimate protection. Wet and cold barrier.
Many sizes
from
S – 8XL
9475
TTMC-W jacket:
• Concealed hood.
• Arms stay dry with storm cuffs.
• Longer thigh length jacket.
• Waterproof.
• In accordance with many standards.
• Material complies with: AS/NZS
1906.4:2010.
• Day/night compliant, transit compliant.
Many sizes
from
S – 8XL
9462
Raintrousers:
• 100% polyester with PU membrane.
• Comfort fit elastic waist drawstring.
• Zip and press stud adjustments on legs.
• Totally seam sealed.
• Additional visibility with a double band of
UltraFlect reflective tape.
• High visibility in accordance with
AS/NZS 4602.1: 2011.
S – 4XL
6XL
8XL
Personal
Safety Gear
SUNSCREEN – PROTECT YOUR SKIN FROM THE SUN
25
Part
Number
Description
Sizes
9295
SPF Suncream 30+ with moisturising
vitamin E.
3 hours water resistant. Convenient choice
of sizes.
75ml with
carabiner
9290
125ml
tube
9292
500ml
pump
bottle
9293
1 litre
pump pack
9294
2.5 litre
pump pack
HEARING PROTECTION – EARMUFFS AND EARPLUGS
Part
Number
Description
9314
Class 5 general purpose earmuffs, hearing protection up to
110dB(A). Solid lightweight ear cup construction and high
quality ear cushions. Comfortable over extended wear periods
with low clamping force but tight snug seal.
9312
Fully folding Class 5 earmuffs that fold small for easy storage.
Good quality.
9311
Hard hat earmuffs that clip into slots and can be swivelled up
off your ears. Class 5, good quality.
9304
Earmuffs with the band behind the head.
Class 5, AS/NZS 1270.2002. Good quality.
9302
10 pairs
Disposable ear plugs for hearing protection up to 110dB(A),
Class 5. Two size packs to choose from. Pairs packaged in
individual poly bags for convenience and hygiene.
Superior design - the bell shape assists with correct fit and
user comfort.
9303
Box of
200 pairs
DUST MASKS AND RESPIRATORS
Part
Number
Description
Sizes
9370
Lightweight dust mask for non-toxic dust.
Box of 50
9371
P1 rated respirator protects against
mechanically generated particles.
Box of 20
9372
P2 rated respirator with valve for extra air
flow. Protects against mechanically and
thermally generated particles.
Box of 12
Personal
Safety Gear
26
HAND SANITISER
Part
Number
Description
Sizes
9610
Hand sanitiser. Kills 99.99% of germs without needing water.
354ml
Personal
Safety Gear
PROTECTIVE EYEWEAR
Part
Number
Description
9309C
Clear lens
Economy safety glasses in clear or smoke options.
Ultra light wrap around design with AS/NZS approval.
99.9% UV protection, medium impact, polycarbonate lens.
9309S
Smoke lens
9316C
Clear lens
Mid range safety glasses that are lightweight and have soft
leg tip pads for comfort. Hard coat anti-scratch and anti-fog
lens. Medium impact and 99.9% UV protection. AS/NZS 1337
compliant. Available in clear or smoke.
9316S
Smoke lens
9317C
Clear lens
Lightweight safety glasses with nose pads and soft leg tips for
greater comfort. Medium impact, anti-scratch lens with 99.9%
UV protection. Available in clear or smoke.
9317S
Smoke lens
9315C
Clear lens
Safety goggles, ideal for dusty jobs. Anti fog, anti-scratch
hooded 2mm lens in clear and smoke options.
9315S
Smoke lens
27
FIRST AID KITS – OSH COMPLIANT IN A RANGE THAT SUITS MANY
DIFFERENT APPLICATIONS. DON’T BE CAUGHT OUT!
Part
Number
Description
9602
‘Auto Kit’ – a complete kit for lone or mobile use. Ideal for fleet
vehicles, travel, tramping and personal use.
9603
‘Auto Deluxe’ – a small but comprehensive kit in a fold out
carry bag. For lone or mobile use. Ideal for tradesmen’s
vehicles, boats, fleet or residential use.
9604
‘General Purpose’ – an all purpose kit for lone, mobile or small
business use. Room for personal additions.
9605
‘OSH Compliant Kit A’ – comprehensive contents including
accident register for small – medium businesses. (Approx 1-5
factory or 1-25 office workers).
9606
‘Hard Pack 1000’ – in a sealed container. Ideal for fleet
vehicles in wet, dirty or dusty conditions.
9607
‘OSH Cabinet’ – a steel cabinet with comprehensive contents
ideal for medium to large businesses.
Personal
Safety Gear
28
GLOVES - PROTECT YOUR MITTS
Personal
Safety Gear
Part
Number
Description
9305
Examination disposable gloves in sizes M, L, XL.
Box of 100.
9305H
Disposable High-Risk latex gloves. Cuff extended to
length of 28cm, 13mm thickness - super tough. Textured
finger grip. Sizes M, L, XL, 2XL. Box of 50.
9306
General purpose work glove. Soft and flexible with a
durable coating. Wet and dry grip with water repellent
palm. S, M, L, XL.
9307
Premium full grain cowhide Rigger glove. Soft and durable
leather. Sizes L, XL and 2XL.
9307-E
Economy Rigger split leather gloves, cotton backed.
Safety cuff and knuckle bar and reinforced palm for added
protection. One size fits all.
9308
Reflective safety glove for greater visibility. ‘A’ grade cow
grain palm. 25mm yellow reflective tape on top of hand.
One size fits all. Thinsulate lined for warmth.
Part
Number
Description
9301
Hard hat in various colours. Adjustable head band.
HARD HATS
9306
29

Safety - TransQuip

Transcription

Similar documents

PRINT the Sell Sheet PDF

Series UCL product information sheet

Omnimount QM100 F Instruction Manual

Portage la Prairie RCMP Detachment and Manitoba Crime Stoppers

The author has no financial interest to disclose. How Many of your

Power Lead screw for 7x12 lathes

ed3706 series

Amber Gray - LaRosa`s MVP of the Week

LS-100/LS-200

Citadel 4/4i PDF