Mold and dies - TaeguTec Times

Mold & die
Industry
In the 21st Century, it is not overly exaggerated to say that most of the
major industrial markets and the corresponding products, such as the
automotive sector, consumer electronics and electronic gadgets are
mass produced through mold and die manufacturing processes.
Furthermore, the machining equipment and machine tool technology
has become one of the most critical elements, as the demands for the
products are pursuing more sophisticated and advanced accomplishments.
For extended mold life, producing parts from the highest quality materials
is a pre-requisite for mass production environments that demand a cost
effective solution. Therefore, a company’s competitive edge often relies
upon choosing a partner that can supply the right tooling and peripheral
equipment to process the most difficult-to-machine materials.
Mold & Die
industry
According to a recent survey, the ratio of the mold type tooling produced currently stands at:
41% for plastic injection molds, 40% press dies, 5% die casting molds, 4% forging dies,
3% rubber molds, 3% metal molds and powder metallurgy molds and glass molds account for 2% each.
Most mold companies require cutting tools that can cater for high speed machining to deliver
a competitive advantage for the end users new products. Furthermore, where the industry trend
never ceases to introduce process-intensive, high speed and precision equipment to accommodate
the ever demanding customers, TaeguTec supplies a variety of tools for roughing, semi-finishing and
finish machining that will satisfy any mold material and the operating conditions of the machine tools.
››› Press Die
››› Injection Mold
››› Rubber Mold
››› Die Casting Mold
››› Forging Die
Press dies are a metal forming process that installs
special mold tools into a press machine that works in
a linear reciprocating movement. The main materials
used in press dies are grey cast iron, tool steel and
carbon steel.
Injection molds are another form of die that can produce
plastic molds. Initially, hot melt (or half melt) macro
molecule (high polymer plastic resin) materials are
injected with high pressure to an empty space between
the core and cavity, and then cooled to gain the desired
plastic mold.
The injection mold materials should be heat resistant with
a low coefficient of thermal expansion. The molds should
be uncomplicated for machining and thermal processing
aspects. The composition of the molds include mold bases,
a core and additional parts. Until recently, the process only
used plastics but now mold steels are being applied more
commonly.
Rubber molding is the process of putting rubber and
synthetic rubber materials into a mold and developing
the shape of the rubber workpiece by heating and
pressing, a process similar to plastic compression molding.
The materials for molds may depend upon the rubber
materials, quality and quantity produced. If the production
run is a small quantity, the structural carbon steel can be
applied. In the case of producing uniform products for a
longer period of time, hardened steel will be utilized as
its durability is improved by the forging process.
Die casting molds are made from low melting point
metal alloys, such as Al, Zn and Mg. With high pressure,
the materials are injected into a precision shaped die,
in order to make thin and light-weight precision metal
molding. Die casting mold materials require exceptional
strength, toughness and hardness to bear the severe
conditions of high temperature and high pressure.
Hence, hot work tool steels are used among the usual
compositions.
Forging dies are a mold process to shape a workpiece
by hammering or pressing when the workpiece is cold
or heated. Most forging, especially sizable dies, are
hot forged, hence, forging die materials must have a
strong thermal and mechanical resistance.
Tool Steel and Die Steel, which contain chromium,
nickel, molybdenum and vanadium, are the main
components of forging materials. In order to make
forging dies, the forging materials are machined into
a desired shape after being cast or forged and then
worked through to the final process, surface finishing.
2
Total Machining Solutions for the Mold & Die Industry
3
Mold & Die
Mold & Die
Machining Program
››› Peripheral Milling
››› Deep cavity Milling
››› copy Milling
››› profile Milling
››› copy Milling
Upper
Lower
›››Deep Drilling
›››Tooling System
High precision chucking system
4
›››Modular System
Modular heads and shanks
Total Machining Solutions for the Mold & Die Industry
››› Face Milling
›››end Milling
›››Hole making
›››CAM Program Service
Customer support service with CAM software
›››Grades
New grades for Mold & Die machining
5
Industry
Mold & Die
Deep Cavity Milling

‣New CHASEMOLD line improves the existing line with its thick
and robust new design, while offering excellent chip evacuation
for enhanced milling performance.
Roughing
CHASEMOLD
Face Milling
New milling solution for rough machining of
cast iron and steel

‣14 corners-45° entry angle with economical double sided inserts
‣Ideal solution for high performance cast iron and steel machining
‣Dual usage insert for both cutter types; a screw type cutter for
‣With 8 insert edges, customers can witness an upgraded solution
with reduced tooling costs whilst being able to machine at exceptionally
stable conditions.
steel machining and a wedge type cutter for cast iron machining
Efficient and smooth machining due to positive cutting edge
geometry that lowers cutting loads during rough machining
‣
CHASE
HEPTA
RYM(H)X - MR
RYMX -MM
M
6
MM
CE
Total Machining Solutions for the Mold & Die Industry
RYMX- MM
RYM(H) X - M
RYM(H) X - ML
RYHX- AL
RYHX -L
RYHX - L
7
Industry
Mold & Die
High Feed Milling

High feed cutters with BLMP 06 & BLMP 09 inserts
Roughing
CHASE
FEED
Deep Cavity Milling

‣Unique shape with double sided round insert delivers an
economical insert with up to 16-corners whilst the shredded type
has 8-corners with a maximum 2.0mm depth of cut.
The unique structure of the insert and cutter pocket ensures strong clamping
CHASE MOLD
Anti-Rotating system
When machining with a long overhang cutter, it is recommended that
customers use a shredded type insert to reduce the cutting load
‣ Particularly suitable for High Feed Machining
‣ Low cutting forces
‣ 4 corner inserts for cost effective machining
‣ Excellent chip evacuation
‣
‣
‣
RNMU-ML
8
Total Machining Solutions for the Mold & Die Industry
BLMP 06-M
BLMP 06-MM
BLMP 09-M
BLMP 09-MM
‣ Through-coolant (air) system
‣ Low chipping tendency
‣ Minimum diameter 16mm
BLMP 06-ML
RNMU-M
BLMP 09-ML
9
Industry
Mold & Die
Plunge Milling

‣Available in rough and semi-finishing plunge milling applications
‣4 corner, double sided helical cutting edge insert for economical machining
Roughing
CHASE
High Feed Milling
PLUNGE

‣CHASE2FEED is a double-sided insert with
6 cutting edges that can withstand ultra high feed rates.
BLMP 1205R-M
‣This cutter can run at a feed rate up to
4.0mm/tooth
at a maximum
2.0mm depth of cut.
CHASE
FEED
‣The insert has a unique clamping structure that
‣Strong clamping force credit to wide contact
surface and a high tensile screw (M3.0mm)
‣Applied internal coolant system for
longer tool life and excellent chip evacuation
delivers stable performance when high feed milling
and deep pocket machining.
‣M type insert for general milling,
ML type for difficult-to-cut materials
‣Covers plunge milling, face milling
and 90° milling operations

PLNG 09-ML

‣
The unique high feed insert design combines with the super fine pitch
CHASEMILL cutter to give users the fastest feed rate cutter available.
The large radius cutting edge permits the machining of deep pockets
with a long cutter overhang due to the maximum cutting force being
directed towards the spindle.
‣
CHASEMILL
AXMT 0602R-HF
APKT 09T3 PER-EM
10 Total Machining Solutions for the Mold & Die Industry
PLNG 09-M
and high density pitch option
High
positive insertQUAD
geometry and dimple chip breaker lower
CHASE
the cutting forces and temperature
‣
SNGX 1306

AXMT 06-EM
APKT 09T3R-HF
‣8 cutting edges per insert for economical machining
‣Unique angled screw clamping gives secure insert clamping
APKT 1204R-HF
‣ CHASEQUAD can be used for a variety of
applications such as: counter boring, spot facing,
drill milling, plunge milling, end milling and
extended flute end milling for the mold and
die industry
CHASEQUAD
SPMG-EM
SPMT-EM
XOMT
11
Industry
Mold & Die
The new MILLRUSH line provides an economical solution with three 90˚
helical cutting edges that are thick and strong. Available with a variety of insert
and cutter options, the MILLRUSH gives users the opportunity to conduct
most milling applications using two helical cutting edged inserts.
Roughing
Copy Milling
(Ø16 - Ø32)

‣
Dovetail mechanism clamping provides
increased security and insert clamping
High helix cutting edge for smooth milling
Economical double sided insert
Inserts are applicable for both internal and
external pockets making it easier to
control inventory
‣
‣ DUETBALL
‣

It is available in an end mill type ranging from 16mm to 50mm in diameter
with a modular type from 20mm to 40mm and a face mill type available
with a 40mm to 160mm diameter.
2FB-M
(Ø32, Ø50)
3PKT-M
Pressed size
‣
Effective 3 flute design enables
high feed machining that enhances productivity
Unique double-sided design with 2 cutting edges
A highly stable cutting performance with thick
and strong cutting edges
‣
‣

3FB-C
3PKT-ML
Pressed size
with medium light
cutting edge
3PHT-M
Periphery ground
Various milling application
with 3PKT insert
3FB-P
TRIOBALL
Slotting
Shouldering
Ramping
Helical ramping
Optimized double sided inserts for rough milling
‣
6 cutting edges promote economy and
productivity in cast iron and tool steel
Low cutting resistance credit to half effective flute design
CHASE
Thick
inserts (8mm) BALL
enable stable machining
Insert design with high positive cutting edges
Excellent performance in heat treated steel
and welded components
‣
‣
‣
‣
12 Total Machining Solutions for the Mold & Die Industry
6RBE-M
13
Industry
Mold & Die
Roughing
Semi-finishing & Finishing
Peripheral Milling
Profile Milling


‣The CHASEMILL helical positive cutting edge guarantees smooth,
‣Applied with high helix cutting edges to guarantee smooth and stable cutting performance
‣It demonstrates improved run-out and precision, thanks to the captive pocket method
quiet and efficient milling with exceptional accuracy.
Various cutting geometries and grades can be applied to
a wide range of materials and cutting conditions.
Available with a full range of corner radii and sharp ground inserts
for aluminum milling applications, the range has an extensive
selection of cutter bodies with different insert densities,
coolant options and extended lengths to provide
the ultimate milling solution.
‣
and optimized insert configuration.
The internal coolant system in the cutter body offers excellent chip evacuation and prolongs tool life
Enhanced contact area between insert and holder to deliver extremely strong clamping
‣
‣ FINEBALL
CHASEMILL
Ball insert
NFB-FM
APKT 09T3
PER-EM
APKT 1204
PER-EM
APKT 1705
PER-M/EM
APKT 1705
PER-EML
APKT 1204
PER-SM
NFB-SM
Corner radius insert
NFR
APKT 1705
PER-SM

‣The CHASEQUAD can be applied to a variety of
applications such as: counter boring, spot facing,
drill milling, plunge milling, end milling and
extended flute end milling
CHASEQUAD
SPMG-EM
14 Total Machining Solutions for the Mold & Die Industry
SPMT-EM
15
Industry
Mold & Die
Industry
High Performance Machining

‣Efficient and reduces cycle time with extremely
high feed machining capability
‣Lowers cutting forces with unique corner geometry
Solid Carbide End Mill
SOLIDFEED
High Speed Machining

High performance solid carbide end mill
for high speed machining
‣Best solution for High Speed Machining on high-hardness materials
‣PVD coating layer and new ultra fine size substrate for longer tool life
‣TT5505 grade coating for hardness & oxidation resistant properties
‣Designed for rough machining applications
including slotting, shouldering, pocketing
and helical ramping
Maximum feed per tooth 1.0 mm/tooth
‣
that improve tool life and surface finish
Extensive range of end mills covering a wide range of applications
Advanced design for high speed machining on hardened materials
High precision, accurate end mills (‘R ‘accuracy tolerance: ±5µm)
‣
‣
‣
HARDMILL
PLUS
B
A

‣The unequal cutting edge spacing with high helix angle
Big radius shape—
prevents vibration and
tool breakage of the
neck component
New TT5505 grade increases
tool life credit to increased
wear resistance
Gash design for high strength
and better chip evacuation
enables stability and precision
machining under high speed
conditions
eliminates vibration and lowers cutting forces
whilst improving material removal rates.

16 Total Machining Solutions for the Mold & Die Industry
A�B
Excellent chatter
dampening ability
due to unequal
spacing of cutting
edges
PLUS
‣
Precise radius means
improved accuracy and
guaranteed stability
(below ‘± 5µm’ R accuracy)
B
STARMILL
The MULTIMILL can replace 2 end mills (rough + finish)
without the need for reducing feed rates.
This drastically reduces machining time.
Strength reinforcement
of corner R type
A
Excellent chip
evacuation
MULTIMILL
For finishing
+
For roughing
=
for Top Productivity
17
Mold & Die
Graphite Machining

‣High performance machining on graphite & non-ferrous materials
‣Excellent wear resistance due to diamond coating (TT6050)
Solid Carbide End Mill
DIAMILL
Rib Machining

For Rib-Processing
‣
RIF _ : 2 flute miniature series
- square end (0.4mm to 3.0mm diameter)
RIB _ : 2 flute miniature series
- ball nose (0.4mm to 3.0mm diameter)
‣
APEXMILL
18 Total Machining Solutions for the Mold & Die Industry
RIF
RIB
‣Improved chip evacuation with specially designed geometry
‣Excellent surface finish with TaeguTec ultra fine diamond coating
19
Industry
Mold & Die
Industry
Drilling & Reaming

‣Four cornered economical insert design
‣The same insert is applicable for both internal and external pockets
‣Improved machinability with optimally configured cutting edge
Holemaking
TOPDRILL
New Head-Indexable Drill
‣
Quick change system: The innovative clamping mechanism
with special key enables head indexing on the machine with ease.
Flexibility: A series of differently sized head diameters can be
coupled with a drill body.
Twisted coolant channel: Thanks to the twisted coolant structure,
chip evacuation is improved.
Smooth chip flow: optimised & polished chip gullet
guarantees excellent chip evacuation.
‣Applicable to most materials including low carbon and mild steel
‣Helix type coolant channels improve chip evacuation and
‣
P
r
Tailo
‣
‣
M
K
F
for flat bottom hole
N


‣Excellent chip flow
‣Low cutting forces
‣Highly rigid drill body
‣High hole accuracy & excellent surface finishes
High speed drilling compared to conventional deep hole drills
such as HSS drills
Smooth chip evacuation with unique flute geometry
Drilling depth up to 30xD without pecking cycle
High quality of holes with low cutting forces & increased rigidity
‣
‣
‣
‣
H-DRILL
T-REAM
M.Q.LDRILL


‣Brazed and indexable type available
‣A wide variety of reamers available
‣Highly productive reaming for high-speed machining
‣Delivers high hole accuracy
-D8mm~D250mm(100xD)
Cost effective solutions with high productivity
Good surface finishes with high tolerance levels
‣
‣
Head exchangeable type
T-DEEP
Blade
type
TM-REAM
Solid type
TB-REAM
20 Total Machining Solutions for the Mold & Die Industry
e
-mad
precision when hole making
Enhanced insert durability with new grade (TT9080)
‣
TS-REAM
21
Mold & Die
Boring
Tooling System
Modular Precision Tooling
High Precision Chucking System


‣Various and flexible clamping systems
‣Adjustable length and boring diameter
‣Ultra-precise adjustment (Ø0.002mm)
‣Suitable for Roughing (Ø18mm ~ Ø800mm)
‣Suitable for Finishing (Ø2.5mm ~ Ø800mm)
‣Excellent for high speed machining
‣Balanced to G2.5 at 20,000rpm
‣Short overhang provides anti-vibration and powerful gripping force
‣Precision run-out and high repeatability
‣Adaptable for ER and T-Shrink collets
‣Slim design for mold machining
(Thermal shrink chucks)
T- SHRINK
ER... SRK
Integral SRK
Integral SRKIN
Thermal heating unit
For ER…SRK/SRF
Exclusive and compact portable
‣
‣
heating device
Induction heating unit
operation and tool change
‣Easy
Quick
‣ heating and cooling time

TSK Slim Collet Chuck
‣Ensures high accuracy (Run-out 0.005mm)
and powerful gripping
Strong clamping force when compared to ER collet
Various tooling can be used with this slim and
accurate collet design for high speed machining
Collet range : Ø1~ Ø25.4mm
Internal coolant available
‣
‣
‣
‣
22 Total Machining Solutions for the Mold & Die Industry
Industry
23
Mold & Die
Modular System
CAM Program Support
Economical Modular Head & Shank

‣Modular and flexible clamping system
‣Extensive range of milling heads can be
mounted on each shank size
‣Screw lock and face contact provide
a strong rigid milling system
‣Slim design for mold industry
T- FLEXTEC
Carbide shank
Steel shank
24 Total Machining Solutions for the Mold & Die Industry
Industry
%
O0001
(T=0Dia=50.Corner-R=25.Offset=0.)
G80G49G40G00G17
T0M06
G90G00G54X11.719Y298.773
G90G43Z50.H0
G00Z50.
M00
S1273M03
M51
G05P10000
Z50.
G00X11.719Y298.773Z50.
X11.719Y298.773Z-15.
X11.719Y298.773Z-19.
G01Z-25.F200
X11.1Y298.129
X10.605Y297.384
X10.251Y296.564
X10.048Y295.694
X10.Y295.
G01X10.01Y218.748Z-25.085F381
X10.085Y216.536Z-25.721
X10.217Y214.657Z-26.908
X10.433Y212.722Z-28.925
X10.705Y210.972Z-31.439
X11.436Y207.446Z-37.351
X11.684Y206.371Z-38.935
X12.413Y203.229Z-43.164
X13.225Y199.387Z-47.056
X13.835Y195.91Z-49.797
X14.376Y191.869Z-52.143
X14.734Y187.922Z-53.768
X14.955Y183.358Z-54.761
X15.Y180.Z-54.999
X14.982Y107.865Z-54.912
X14.807Y103.207Z-54.082
X14.487Y99.177Z-52.65
X14.025Y95.363Z-50.613
X13.439Y91.754Z-48.02
X12.832Y88.681Z-45.206
X12.156Y85.647Z-41.85
X11.358Y82.215Z-36.948
X10.562Y78.164Z-30.164
X10.283Y76.02Z-27.567
X10.132Y74.251Z-26.103
X10.026Y71.955Z-25.21
X10.Y69.979Z-25.001
X9.97Y28.561Z-25.
X9.637Y24.979
X8.908Y21.327
X7.851Y17.928
X6.604Y14.963
X-13.84Y-3.172
X-17.243Y-4.129
X-20.865Y-4.754
X-24.439Y-4.995Z-25.002
X-102.979Y-5.032Z-25.131
X-108.574Y-5.264Z-25.944
X-114.622Y-5.745Z-27.615
X-121.709Y-6.57Z-30.385
X-132.12Y-8.153Z-35.475
X-149.67Y-11.168Z-44.501
X-158.84Y-12.598Z-48.526
X-166.543Y-13.595Z-51.264
X-174.266Y-14.353Z-53.285
X-181.623Y-14.814Z-54.497
X-189.28Y-14.999Z-54.985
X-293.557Y-14.977Z-54.878
X-300.449Y-14.805Z-54.091
X-307.428Y-14.473Z-52.553
X-315.089Y-13.951Z-50.122
X-323.698Y-13.216Z-46.611
X-346.797Y-11.057Z-35.721
X-354.077Y-10.527Z-32.909
X-360.26Y-10.205Z-31.146
X-365.951Y-10.036Z-30.216
X-370.008Y-10.Z-30.
X-505.
G01X-505.89Y-10.08F200
X-506.751Y-10.317
X-507.557Y-10.703
X-508.281Y-11.227
X-508.9Y-11.871
G00Z-15.
X-508.9Y-11.871Z50.
G05P0
M59
G00Z50.M09
G91G28Z0.
M01
M30
%

CAM - Machining Program
TaeguTec supports its cutting tools and machining solutions
for the mold & die industry with the productive CAM software
solutions provided by technology partners.

Technical Support
‣Data analysis: Data analysis, advice and optimum
solutions will be provided.
‣Mold & Die Business Support:
Mold & Die and 3D modeling related business support
will be offered.
Tooling Support: TaeguTec offers its customers tooling
support solutions that work in harmony with its cutting tools.
Customer consulting
‣
‣
25
Mold & Die
Industry
TT5515 & TT5525 Grades
Grade for high speed machining on hardened steel
and mold & die applications
Mold & Die
New Grades
TT7080 & TT9080 Grades
With new PVD multi nano coating grades, TaeguTec now offers
the ultimate in tooling solutions for the mold and die industry!

TT7080
‣New yellow coloured PVD coated grade for general steels,
alloy steels and mold steels
TT7080 has high wear and thermal crack resistance with
a high mechanical shock resistance
Recommend for dry milling
For medium to high speed machining in the
mold & die industry (Cutting speed 120-250 m/min)
‣
Multi nano
TiAlN/AlTiN + TiN
‣
‣


TT5515

TT5525
An ultra wear resistant high performance grade
covering all ISO ranges suitable for alloy steel,
pre-hardened steel and hardened steel
Optimally balanced with wear resistant and
anti-chipping properties, it is suitable for
general machining of carbon steel and alloy steel
‣Alloy, pre-hardened & hardened steel
(45 < HRC < 55)
‣Medium to high speed machining
‣Ultra fine substrate
‣General machining of carbon & alloy steel
(<40 HRC)
‣Low to medium speed machining
‣Submicron substrate
TT9080
‣New yellow colored PVD coated grade for normal steels,
alloy steels, mold steels and stainless steels
Sub-micron substrate
Has high wear resistance and an extremely high toughness level
Recommend for dry milling
For medium to fine machining in mold & die cutting speed
80 ~ 160 m/min
Excellent grade for high feed machining at low depths of cut
‣
‣
‣
‣
‣
Application range
Application range
High
Cutting speed (m/min)
High
Cutting speed (m/min)
Substrates
TT7080
TT9080
Low
TT5515
TT5525
Low
Hardened steel
General purpose
26 Total Machining Solutions for the Mold & Die Industry
Hardened steel
General purpose
27
TaeguTec
TaeguTec Global
Global Supply
Supply Network
Network
World Headquarters
World Headquarters
TaeguTec
Ltd.
France
France TaeguTec France S.A.R.L
Ingersoll
Argentina
Argentina
TaeguTec
Argentina SA
Germany
Germany
Ingersoll
Werkzeuge GmbH
TaeguTec
Ltd. Gachang-myeon,
1040
Gachang-ro,
1040 Gachang-ro,
Dalseong-gun,
DaeguGachang-myeon,
711-865, KOREA
Dalseong-gun,
Daegu 711-865, KOREA
Tel:
+82-53-760-7640
Tel:
+82-53-760-7640
Web: http://www.taegutec.com
Web: http://www.taegutec.com
Argentina
SA7
11TaeguTec
de septiembre
4237- Piso
11 de septiembre
Piso 7
(C1429BJC)
Ciudad4237Autόnoma
(C1429BJC)
Ciudad Autόnoma
Buenos
Aires, Argentina
Buenos
Aires, Argentina
Tel:
+54-11-4702-6222
Tel: +54-11-4702-6222
E-mail:
[email protected]
E-mail: [email protected]
Australia
Australia
TaeguTec
Australia Pty Ltd.
TaeguTec
Australia
Pty Ltd.
Unit
37, Five Ways
Business
UnitKeysborough
37, Five WaysClose
Business
Park
Park Keysborough
Close
Keysborough,Vic
3173
Australia
Keysborough,Vic
3173 Australia
Tel:
+61-3-9798-1900
Tel: +61-3-9798-1900
E-mail:
[email protected]
E-mail: [email protected]
Belarus Rep.
Belarus Rep.
Twing-M
3/2Twing-M
Klumova Str, Minsk, 220009,
3/2 Klumova
Str, Minsk, 220009,
Republic
of Belarus
Republic
of Belarus
Tel:
+375-17-506-3238
Tel: +375-17-506-3238
E-mail: [email protected]
E-mail: [email protected]
Belgium
Belgium
USI-TOOLS S.P.R.L.
 
Usi-Tools S.P.R.L.  
Parc Industriel Des Hauts
Parc Industriel Des Hauts
Sarts1 Avenue,145
Sarts1 Avenue,145
4040 Herstal, Belgium
4040 Herstal, Belgium
Tel: +32-42-480-481 
Tel: +32-42-480-481 
+32-475-783-204
+32-475-783-204
E-mail:
[email protected]
E-mail: [email protected]
Brazil
Brazil
TaeguTec
TaeguTecBrasil
BrasilLtda.
Ltda.
Rua
Tito,
104-Lapa-Cep
Rua
Tito,
104-Lapa-Cep05051-000
05051-000
São
Paulo,
Brasil
São
Paulo,
Brasil
Tel:
+55-11-3868-6032
Tel: +55-11-3868-6032
E-mail:
[email protected]
E-mail:
[email protected]
Chile
Chile
Cutting
CuttingTools
ToolsChile
ChileE.I.R.L.
E.I.R.L.
Alcalde
Pedro
Alarcón
NºNº765,
Alcalde
Pedro
Alarcón
765,
San
Miguel,
Santiago
- Chile
San
Miguel,
Santiago
- Chile
Tel:
+56-2-553
6944
Tel: +56-2-553 6944
+56-2-552
1181
+56-2-552
1181
E-mail:
[email protected]
E-mail:
[email protected]
China
China
TaeguTec
TaeguTecChina
China
RM
1205,
Huishang
Office
RM
1205,
Huishang
OfficeBuilding,
Building,
No.1286
of of
Minsheng
RD,
No.1286
Minsheng
RD,
Pudong
New
District,
Shanghai,
Pudong New District, Shanghai,China
China
PC:
200135
PC:
200135
Tel:
+86-21-5106-1260
Tel:
+86-21-5106-1260
E-mail:
[email protected]
E-mail:
[email protected]
Croatia
Croatia
Intehna
IntehnaZagreb
Zagrebd.o.o.
d.o.o.
Susedsko
polje
bb,bb,
HR-10090
Susedsko
polje
HR-10090
Zagreb-Susedgrad,
Croatia
Zagreb-Susedgrad,
Croatia
Tel:
+ 385-1-3436-919
Tel:
+ 385-1-3436-919
E-mail:
intehna-zagreb@
zg.t-com.hr
E-mail:
[email protected]
Czech
CzechRep.
Rep.
TaeguTec
TaeguTecČR
ČRs.r.o.
s.r.o.
Domažlická
180a,
CZ-31800
Domažlická
180a,
CZ-31800Plzeň,
Plzeň,
Czech
Rep.
Czech
Rep.
Tel:
+420
373
720
999
Tel:
+420
373
720
999
E-mail:
[email protected]
E-mail:
[email protected]
Denmark
Denmark
TaeguTecScandinavia
ScandinaviaA/S.
A/S.
TaeguTec
Omøgade
DK-2100
Copenhagen,
Omøgade
8, 8,
DK-2100
Copenhagen,
Denmark
Denmark
Tel:
+45-7022-0103
Tel: +45-7022-0103
E-mail:
[email protected]
E-mail:
[email protected]
Finland
Finland
KnorringOY
OYAB
AB
Knorring
Mestarintie 4 6FI-01730 Vantaa, Finland
Karvaamokuja
Tel: +358
956 Finland
041
00380
Helsinki,
E-mail:
Tel:
+358 [email protected]
956 041
E-mail: [email protected]
Ingersoll
TaeguTec
21,
rue Galilée
F-77420France S.A.R.L
21, rue Galilée F-77420France
CHAMPS-sur-MARNE,
CHAMPS-sur-MARNE,
Tel:
+33 (0)1 64 68 45 36France
Tel: +33
(0)1 64 68 45 36
E-mail:
[email protected]
E-mail: [email protected]
Ingersoll
Werkzeuge
GmbH
Kalteiche
Ring
21-25, D-35708,
Haiger,
Kalteiche Ring 21-25, D-35708, Haiger,
Germany
Germany
Tel:
+49 2773-742 0
Tel: +49
2773-742 0
E-mail:
[email protected]
E-mail: [email protected]
Greece
Greece
FG
Technotools-G.& K.Fakitsas Co.
FG Martiou
Technotools-G.&
K.Fakitsas
Co.
25th
& Thrakis 15,
15235 Vrilissia,
25th Martiou
Athens,
Greece& Thrakis 15, 15235 Vrilissia,
Athens,
Greece
Tel: +30-2-10-832-0752
Tel: +30-2-10-832-0752
E-mail:
[email protected]
E-mail: [email protected]
Hungary
HungaryHungary Kft.
TaeguTec
TaeguTec
Hungary
Kft.
1142
Budapest,
Kassai u.151.
1142
Budapest, Kassai u.151.
Tel:
+36-1-273-29-52
Tel:
+36-1-273-29-52
E-mail: [email protected]
E-mail:
[email protected]
Web:
http://www.taegutec.hu
Web: http://www.taegutec.hu
India
India
TaeguTec
India P Ltd.
TaeguTec India P Ltd.
Plot Nos.119 & 120, Bommasandra
Plot Nos.119 & 120, Bommasandra
Industrial Area, Phase 4, Bangalore
Industrial Area, Phase 4, Bangalore
560 099, India
560 099, India
Tel: +91-80-2783-9111
Tel: +91-80-2783-9111
E-mail: [email protected]
E-mail: [email protected]
Indonesia
Indonesia
PT.
PT.TaeguTec
TaeguTecIndonesia
Indonesia
Easton
Center
EastonCommercial
Commercial
Center
Jl.Jl.Gunung
Panderman
Blok
B no.
12 12
Gunung
Panderman
Blok
B no.
Cikarang
Selatan-Bekasi
17550,
Indonesia
Cikarang Selatan-Bekasi
17550,
Indonesia
Tel:
+62-21-29093176/78/79
Tel: +62-21-29093176/78/79
E-mail:
E-mail:[email protected]
[email protected]
Ireland
Ireland
The Netherlands
The Netherlands
T.C.E.
South Africa
South Africa
TaeguTec
South Africa (Pty) Ltd.
New Zealand
New
Zealand
TT
Pacific
Spain
Spain
TaeguTec
Spain S.L
T.C.E.
Kennedylaan
14, 5466 AA, Veghel,
Kennedylaan
14, 5466 AA, Veghel,
The
Netherlands
The+31
Netherlands
Tel:
(413) 38 83 10
Tel:
+31
(413)
38 83 10
E-mail: [email protected]
E-mail: [email protected]
Website:
http://www.taegutec.nl
Website: http://www.taegutec.nl
TT Pacific
1/501
Mt. Wellington Highway
1/501Park,
Mt. Wellington
Highway
Sylvia
Auckland, New
Zealand 1060
Sylvia
Park, Auckland, New Zealand 1060
Tel:
+64-9-573-1280
Tel:
+64-9-573-1280
E-mail: [email protected]
E-mail: [email protected]
Pakistan
PakistanTooling Services
Dynamic
Dynamic
Tooling
Services
Office
No.301,
3rd Floor,
OfficeCenter,
No.301,Blue
3rd Are,
Floor,Fazal-ERoyal
Royal Center,
Blue Are, Fazal-EHaque
Road, Islamabad,
Pakistan
Haque
Road, Islamabad, Pakistan
Tel:
+92-51-2806197
Tel:
+92-51-2806197
E-mail: [email protected]
E-mail: [email protected]
Philippines
Philippines
COLT
COMMERCIAL INC.
Colt508
Commercial
Inc.
Suite
Padilla delos
Reyes Bldg.
Suite
508Luna
Padilla
Reyes
Bldg.
232
Juan
St.,delos
Binondo,
Manila
232 Juan Luna St., Binondo, Manila
Philippines
Philippines
Tel: +63-2-244-9756
Tel: +63-2-244-9756
E-mail: [email protected]
E-mail: [email protected]
Poland
Poland
TaeguTec Poland Sp. z o.o.
TaeguTec Poland Sp. z o.o.
Ul. Kościelna 8
Ul. Kościelna 8
52-314 Wrocław, Poland
52-314 Wrocław, Poland
Tel: +48 71 785 40 85
Tel: +48 71 785 40 85
E-mail: [email protected]
E-mail: [email protected]
Portugal
Portugal
Hexatool,
Hexatool,S.A.
S.A.
Rua
RuaCasal
CasalGalego,
Galego,No.
No.40.44
40.44
2430
2430Marinha
MarinhaGrande,
Grande,Portugal
Portugal
Tel:
Tel:+351-244-550424/5
+351-244-550424/5
E-mail:
E-mail:[email protected]
[email protected]
Hardmetal
Machine
Tools
Ireland
Ltd.Ltd.
Hardmetal
Machine
Tools
Ireland
Romania
Romania
Italy
Italy
Splaiul
SplaiulUnirii,
Unirii,nr.
nr.4,4,Bl.
Bl.B3,
B3,5th
5th Floor,
Floor,
Office
Office5.1,
5.1,District
District4.,
4.,Bucharest,
Bucharest,
Romania,
Romania,040031
040031
Tel:
Tel:+4021
+4021210
2103108
3108
E-mail:
E-mail:[email protected]
[email protected]
Dargan
DarganHouse,
House,Duncairn
DuncairnTerrace,
Terrace,
Bray
BrayCo.
Co.Wicklow,
Wicklow,Ireland
Ireland
Tel:
+353-1-286-2466
Tel: +353-1-286-2466
E-mail:
E-mail:[email protected]
[email protected]
Ingersoll
IngersollTaeguTec
TaeguTecItalia
ItaliaS.R.L.
S.R.L.
Via
Montegrappa
78, 78,
20020
AreseArese
(MI), Italy
Via
Montegrappa
20020
(MI), Italy
Tel:
Tel:+39
+3902.99.76.67.00
02.99.76.67.00
E-mail:
E-mail:[email protected]
[email protected]
Japan
Japan
TaeguTec
Ltd.
TaeguTecJapan
Japan
Ltd.
- Osaka
- Osaka/ /Head
Head office
office
Senri
SenriAsahi
AsahiHankyu
HankyuBldg.
Bldg.15F
15F
1-5-3
1-5-3Shinsenri-Higashimachi
Shinsenri-Higashimachi
Toyonaka-shi
Toyonaka-shiOsaka
Osaka560-0082,
560-0082,Japan
Japan
Tel:
Tel:+81-6-6835-7731
+81-6-6835-7731
E-mail:
E-mail:[email protected]
[email protected]
Website:
Website:http://www.taegutec.co.jp
http://www.taegutec.co.jp
- Nagoya
- Nagoya/ /Branch
Branch office
office
Tel:
+81-52-745-2451
Tel: +81-52-745-2451
- Tokyo
- Tokyo/ /Branch
Branch office
office
Tel:
Tel:+81-3-5753-6281
+81-3-5753-6281
Lithuania
Lithuania
UAB
UABROBUR
Robur LT
Lt
R.Kalantos
R.Kalantosstr.
str.161
161
LT-52315
LT-52315Kaunas,
Kaunas,Lithuania
Lithuania
Tel:
Tel:+370-37-328487
+370-37-328487
E-mail:
E-mail:[email protected]
[email protected]
Malaysia
Malaysia
TaeguTec
Tooling
Systems
Malaysia
Sdn.Sdn.
BhdBhd
TaeguTec
Tooling
Systems
Malaysia
No.23-1&2,
No.23-1&2,Jalan
JalanAnggerik
AnggerikVanilla
Vanilla
BF
BF31/BF
31/BFKota
KotaKemuning,
Kemuning,Seksyen
Seksyen31
31
40460
Shah
Alam
Selangor
Darul,
40460 Shah Alam Selangor Darul,Malaysia
Malaysia
Tel:
Tel:+60-16624
+60-166249432
9432
E-mail:
E-mail:[email protected]
[email protected]
28 Total Machining Solutions for the Mold & Die Industry
SC
SCTaeguTec
TaeguTec Tools
Tools SRL
SRL
Russia
Russia
TaeguTec
TaeguTecRussia
Russia
123290,
123290,Russia,
Russia,Moscow,
Moscow,
2nd
2ndMagistralnaya
Magistralnayastr,
str,8A,
8A,building
building 55
Tel:
Tel:+7-495-627-79-17
+7-495-627-79-17
E-mail:
[email protected]
E-mail: [email protected]
Serbia
Serbia
Intehna
IntehnaBeo
Beo d.o.o.
d.o.o.
TaeguTec
South
Africa
(Pty) Ltd.
P.O.
Box 3121,
Springs,
1560
P.O.
Box 3121,
Springs,
1560
43
South
Main Reef
Road,
43 South
Main Reef
Road, South Africa
New
Era Springs
Gauteng,
New+2711-362-1500
Era Springs Gauteng,
South Africa
Tel:
 
 
Tel: +2711-362-1500
E-mail:
[email protected]
E-mail: [email protected]
TaeguTec
Spain
S.L
Miquel
Servet,
35 P.I.Bufalvent
MiquelManresa
Servet, 35
P.I.Bufalvent
08243
(Barcelona),
Spain
08243
Manresa (Barcelona), Spain
Tel:
+34-93-878-7309~10
Tel:
+34-93-878-7309~10
E-mail: [email protected]
E-mail: [email protected]
Sweden
Sweden
SMV
Verktyg AB
SMV Verktyg
AB
Parkgatan
6
Parkgatan
SE-333
31 6Smalandsstenar, Sweden
SE-333
31 Smalandsstenar, Sweden
Tel:
+46-371-343-48
Tel: +46-371-343-48
E-mail:
[email protected]
E-mail: [email protected]
Taiwan
TaiwanFull Dare Co., Ltd.
Taiwan
TaeguTec
TaiwanRoad,
No.
176, Hwan-Pei
3F., No.56,
Tai St.,
Ku-Shan
Dist.,
Chungli
CityMin
32011,
Taiwan
R.O.C.
Kaohsiung
City
804, Taiwan (R.O.C.)
Tel: +886-3-422-9018
Tel: +886-7-5505996
E-mail:
[email protected]
E-mail: [email protected]
Whacking Industry Co., Ltd.
Thailand
No. 56, Ming-Tai St., Ku-Shan District,
TaeguTec(Thailand) Co.,Ltd.
Kaohsiung 807, Taiwan R.O.C.
6/177 M.7 Srinakarin Rd.,
Tel: +886-7-552-0528, +886-6-203-2997
T.Bangmuang, A.Muangsamutprakarn,
E-mail: [email protected]
Samutprakarn 10270, Thailand
Tel: +662-759-9300, 662-759-9172
Thailand
E-mail: [email protected]
TaeguTec(Thailand) Co.,Ltd.
6/177 M.7 Srinakarin Rd.,
Turkey
T.Bangmuang,
A.Muangsamutprakarn,
TaeguTec Turkey
Samutprakarn
Thailand
TOSB Otomotiv10270,
Yan Sanayi
Ihtisas
Tel:
+662-759-9300,
662-759-9172
Organize Sanayi Bolgesi
E-mail:
[email protected]
1.Cad. 15.Sokak No:9 41420 Şekerpınar
Çayırova/KOCAELI, Türkiye
Turkey
Tel: +90-850-201-69-00
TaeguTec
Turkey
E-mail: [email protected]
TOSB Otomotiv Yan Sanayi Ihtisas
Organize
UkraineSanayi Bolgesi
1.Cad.
15.Sokak
No:9 41420 Şekerpınar
TaeguTec
Ukraine
Çayırova/KOCAELI,
40-b Pushkin prospectTürkiye
Dnepropetrovsk
Tel:
+90-850-201-69-00
Ukraine,
49006
E-mail:
[email protected]
Tel: +38-056-790-70-99
E-mail: [email protected]
Ukraine
TaeguTec
Ukraine
United Arab
Emirates
40-b
Pushkin prospect Dnepropetrovsk
A.F.Husain
Ukraine,
49006
Al Ghurair
W/H Shed No. 60
Tel:
+38-056-790-70-99
Al Quoz
Industrial Area
E-mail:
[email protected]
P.O. Box:
4007 Dubai, UAE
Tel: +971-4-3400034
United
Arab Emirates
E-mail: [email protected]
A.F.Husain
Singapore
Singapore
Al
GhurairKingdom
W/H Shed No. 60
United
Al
Quoz Industrial
Area
TaeguTec
UK Ltd.
Dubai,
UAEWetherby,
P.O.
Box:
4007
Waterside, Grange
Park,
Tel:
+971-4-3400034
Leeds,
LS22 5NB, United Kingdom
E-mail:
[email protected]
Tel: +44-1937-589-828
E-mail: [email protected]
Slovakia
Slovakia
Waterside,
Wetherby,
Ingersoll Grange
CuttingPark,
Tools
Leeds,
LS22 5NB,
Kingdom
845 S Lyford
Road United
Rockford,
Tel:
+44-1937-589-828
IL 61108-2749,
U.S.A.
E-mail:
[email protected]
Tel: +1-815-387-6600
E-mail: [email protected]
Autoput
Autoput22,
22,11080
11080Zemun,
Zemun,Serbia
Serbia
Tel:
Tel:+381-11-3149-092
+381-11-3149-092
E-mail:
E-mail:[email protected]
[email protected]
TT
TTTooling
ToolingSystems
Systems
BK502,
BK502,#03-823,Jurong
#03-823,JurongWest
WestAvenue
Avenue1,1,
Singapore
Singapore640502
640502
Tel:
Tel:+65-6-4254918
+65-6-4254918
E-mail:
E-mail:[email protected]
[email protected]
TaeguTecSlovakia,
Slovakia,s.r.o.
s.r.o.
TaeguTec
Bytčická2/44
2/44010
01001
01Žilina
Žilina
Bytčická
SlovakRepublic
Republic
Slovak
Tel:+421
+42141
417000056
7000056
Tel:
E-mail:[email protected]
[email protected]
E-mail:
Slovenia
Slovenia
Intehnad.o.o.
d.o.o.
Intehna
Špruha40,
40,Si-1236,
Si-1236,Trzin,
Trzin,Slovenia
Slovenia
Špruha
Tel:+386-1-580-9260
+386-1-580-9260
Tel:
E-mail:[email protected]
[email protected]
E-mail:
United Kingdom
TaeguTec
U.S.A. UK Ltd.
U.S.A.
Vietnam Cutting Tools
Ingersoll
DMC
Technology
Co., Ltd.
845
S Lyford
Road Rockford,
No.
109, Cong Hoa
Street, Ward 12,
IL
61108-2749,
U.S.A.
Tan +1-815-387-6600
Binh District, Ho Chi Minh City,
Tel:
Vietnam.
E-mail:
[email protected]
Tel: +84-8-62925556
E-mail:
[email protected]
Vietnam
DMC Technology Company Limited
109 Cong Hoa Street, W.12,
Tan Binh Distric, HCMC, Vietnam
Tel: +84-8-62925556
E-mail: [email protected]