How to Spray Paint Metal Furniture | Krylon®

METAL TABLE AND CHAIRS
page 1 of 3
Transform outdoor metal furniture from old and rusty
to sleek and stylish with Krylon® ColorMaster ™ Paint + Primer.
PROJECT TIME
2 hours
SKILL LEVEL
1
2
3
4
5
MATERIALS
Krylon® ColorMaster™ Primer
All-Purpose Gray
Krylon® ColorMaster™ Paint + Primer
Gloss Banner Red
All-purpose cleaner
Rag
Drop cloth
INSTRUCTIONS
1
Sandpaper or wire brush
Set up a spray area by covering work area with a drop cloth. Make sure it is a well-ventilated area.
2
Using an all-purpose cleaner, thoroughly clean
the table and chairs to remove dirt, oils and dust.
Rinse thoroughly with water and allow to dry.
3
If paint or rust is flaking off the surface, use a wire
brush or sandpaper to remove it. Wipe clean.
TABLE:
4
Use Krylon ColorMaster Primer to help cover any
corrosion on the metal table and create an even
painting surface. Holding the can of primer
6-8 inches from the surface, begin priming the
underside of the table using a sweeping side-to-side
motion with slight overlap.
5
Allow primer to dry for at least 10 minutes.
(continued on next page)
METAL TABLE AND CHAIRS
page 2 of 3
Transform outdoor metal furniture from old and rusty
to sleek and stylish with Krylon® ColorMaster ™ Paint + Primer.
PROJECT TIME
2 hours
SKILL LEVEL
1
2
3
4
5
INSTRUCTIONS
6
Turn table right side up and prime the top, again
allowing primer to dry for 10 minutes.
7
Using Krylon ColorMaster Paint + Primer –
Gloss Banner Red, paint the underside of the table,
holding the can 6-8 inches from the surface and using
a sweeping side-to-side motion with slight overlap.
8
Continue to apply light, multiple coats, waiting
30-60 seconds between each, until you are
satisfied with the appearance.
9
Turn table right side up to paint the table
top, repeating steps 7 and 8.
(continued on next page)
METAL TABLE AND CHAIRS
page 3 of 3
Transform outdoor metal furniture from old and rusty
to sleek and stylish with Krylon® ColorMaster ™ Paint + Primer.
PROJECT TIME
2 hours
SKILL LEVEL
1
2
3
4
5
INSTRUCTIONS
CHAIRS:
10
Use Krylon ColorMaster Primer to help cover any
corrosion on the metal chairs and create an even
painting surface. Holding the can of primer 6-8 inches
from the surface, begin priming the chairs using a
sweeping side-to-side motion with slight overlap.
11
Allow primer to dry for at least 10 minutes.
12
Using Krylon ColorMaster Paint + Primer – Gloss
Banner Red, paint the chairs, holding the can
6-8 inches from the surface and using a sweeping
side-to-side motion with slight overlap.
13
Continue to apply light, multiple coats, waiting
30-60 seconds between each, until you are
satisfied with the appearance.
14
Krylon ColorMaster Paint + Primer dries in 10 minutes
or less and can be handled in about one hour.