Sandpiper S15 Metal Product Brochure

1 1/2 NPT SUCTION PORT
DATA SHEET
Specifications .63& Performance
22.91
581.91
16
9.88
Certified
Quality
SUCTION PORT
Model S15
1 1/2" RF 150# ANSI
R.25
5/8" DIA.,(4) HOLES
EW. SPC'D. ON
6.35
3.88" DIA. BOLT CIRCLE
250.83
9.41
238.95
2.18
55.39
20.41
4.00
518.41
101.60
2.25
57.15
22.41
569.21
8.00
203.20
Metallic
Design Level 1
7.00
177.80
.38
9.53
3.00
76.20
2.00
50.80
AIR INLET
3/4" NPT
Quality System
4.94
ISO9001 Certified
4.00
101.60
4.68
118.87
12.87
326.90
125.46
MOUNTING HOLES
.50 12.06
12.70 306.44
R.25
6.35
Environmental Management System
ISO14001 Certified
12.87
326.90
4.00
101.60
6.44
163.45
Warren Rupp, Inc.
A Unit of IDEX Corporation
800 N. Main St.,
Mansfield, Ohio 44902 USA
Telephone 419.524.8388
Fax 419.522.7867
www.sandpiperpump.com
© Copyright 2013 Warren Rupp, Inc.
All rights reserved
www.sandpiperpump.com
Explanation of Pump Nomenclature
Your Model
S
#: __
____
__________________
____
(fill in from pump
nameplate)
PumpPumpCheckDesignWettedDiaphragm/ Check Valve Non-WettedPortingPump
Brand
Size
Valve
Level
Material Check Valve
Seat
Material Options
Style
Model
#:
SXXXXXXXXXXXXX
Pump Brand
Non-Wetted Material Options
SSANDPIPER®
A
I
J
S
Y
Z
Pump Size
15 1 1/2"
Check Valve Type
BBall
W Weighted Ball
Design Level
1
MufflerPump
Options Options
Design Level
Wetted Material
Pump Options
Painted Aluminum
Cast Iron
Painted Aluminum w/PTFE
Coated Hardware
Stainless Steel with
Stainless Steel Hardware
Painted Aluminum with
Stainless Steel Hardware
Cast Iron with
Stainless Steel Hardware
Porting Options
AAluminum
I Cast Iron
S Stainless Steel
H Alloy C
X Unpainted Aluminum
Diaphragm/Check Valve Materials
1Santoprene/Santoprene
2PTFE-Santoprene/PTFE
BNitrile/Nitrile
CFKM/PTFE
EEPDM/EPDM
I EPDM/Santoprene
GPTFE-Neoprene/PTFE
MSantoprene/PTFE
NNeoprene/Neoprene
VFKM/FKM
Z One-Piece Bonded/PTFE
N
B
R
W
NPT Threads
BSP (Tapered) Threads
Raised Face 150#
Threaded ANSI Flange
Welded Raised Face 150# ANSI Flange Manifolds
Pump Style
SStandard
Muffler Options
0None
1 Sound Dampening Muffler
2 Mesh Muffler
3 High temperature Air Valve
w/Integral Muffler
4 High temperature Air Valve
w/Sound Dampening Muffler
5 High temperature Air Valve
w/Mesh Muffler
6 Metal Muffler
7 Metal Muffler with
Grounding Cable
Check Valve Seat
AAluminum
C Carbon Steel
S Stainless Steel
TPTFE
WUHMW
00.None
P0. 10.30VDC Pulse Output Kit
P1. Intrinsically-Safe 5.30VDC,
110/120VAC 220/240 VAC
Pulse Output Kit
P2. 110/120 or 220/240VAC
Pulse Output Kit
E0. Solenoid Kit with 24VDC Coil
E1. Solenoid Kit with 24VDC
Explosion-Proof Coil
E2. Solenoid Kit with 24VAC/12VDC Coil
E3. Solenoid Kit with 12VDC
Explosion-Proof Coil
E4. Solenoid Kit with 110VAC Coil
E5. Solenoid Kit with 110VAC
Explosion-Proof Coil
E6. Solenoid Kit with 220VAC Coil
E7. Solenoid Kit with 220VAC
Explosion-Proof Coil
E8. Solenoid Kit with 110VAC, 50 Hz Explosion-Proof Coil
E9. Solenoid Kit with 230VAC, 50 Hz Explosion-Proof Coil
SP. Stroke Indicator Pins
A1.Solenoid Kit with 12 VDC
ATEX Compliant Coil
A2.Solenoid Kit with 24 VDC
ATEX Compliant Coil
A3.Solenoid Kit with 110/120 VAC
50/60 Hz ATEX Compliant Coil
A4.Solenoid Kit with 220/240 VAC
50/60 Hz ATEX Compliant Coil
Your Serial #: (fill in from pump nameplate)______________________________________
ATEX Detail
(1)
II 1G c T5
IIII2GD
T5 c T5
3/1 G
II 1D c T100°C
I M1 c
I M2 c
II 2G c T5
II 3/2 G c T5
II 2D c T100°C
(2)
Models equipped with Wetted Options I, S or H,
Non-Wetted Options I, S or Z, Pump Options 6 or
7, and Kit Option 0.
Note: See ATEX Explanation of EC-Type
Certificate
Models equipped with Wetted Options A, I, S, or H,
Non-Wetted Options A, I,Y, or Z, Pump Options 6 or
7, and Kit Option 0.
Note: See ATEX Explanation of Type Examination
Certificate
IIII 2G
Ex ia
iaccIIC
IICT5T5
2G Ex
IIII 3/2
Ex20
ia IP67
c IICT100˚C
T5
2D cGiaD
II 2D Ex c ia 20 IP67 T100°C
Note: Pumps ordered with the options listed in (1) to the left are ATEX
compliant when ordered with kit option P1.
1 • Model S15 Metallic
(3)
(4)
IIII 2G
mccT5
II T5
2G EEx
EEx m
IIII 3/2
EEx
m c II T5
2D c2G
IP65
T100°C
II 2D c IP65 T100°C
Note: Pumps ordered with the options listed in (1) to the left are
ATEX compliant when ordered with kit option A1, A2, A3, or A4.
Compressed Air Temperature Range: Maximum Ambient Temperature
to plus 50°C.
*Note: See page 16 for Special Conditions For Safe Use.
IEC EEX m T4
Note: Pump models equipped with these explosion-proof solenoid kit options
E1, E3, E5, E7, E8 or E9, are certified and approved by the above agencies.
They are NOT ATEX compliant.
www . sandpiperpump . com
s15mdl1ds-rev0313
Performance
S15 Metallic
6
10 (17) 20 (34)
100 P
SI (6
90
5
HEAD
Solids-Handling
• Up to .25 in. (6mm)
Heads Up To
• 125 psi or 289 ft. of water
(8.6 Kg/cm2 or 86 meters)
4
80 PS
I (5.44
70
2
60 PSI
40
Displacement/Stroke
• .41 Gallon / 1.55 liter
Max Operating Pressure
• 125 psi (8.6 bar)
0
SHIPPING WEIGHT
• Aluminum 53 lbs. (24kg)
• Cast Iron 93 lbs. (42kg)
• Stainless Steel 95 lbs. (43kg)
Bar)
(4.08 B
ar)
40 PS
I (2.72
30
20
1
30 (51)
50 (85)
60
50
3
r)
40 (68)
80
Air Distribution Valve
• No-lube, no-stall design
.8 Ba
NPSHR
100
Bar)
30
20 PSI (1.36 Bar)
Air Inlet
10
0
0
0
25
50
10
e
30
20
10
75
9.1
7.6
6
4.5
3
1.5
20
Pressur
100
40
125
60
50
70
U.S. Gallons per minute
150
175
200
225
250
Liters per minute
275
80
300
90
325
350
100
375
110
400
METERS
PSI
7
Performance based on the following: elastomer fitted pump, flooded suction, water at ambient conditions.
The use of other materials and varying hydraulic conditions may result in deviations in excess of 5%.
FEET
Capacity
• 0 to 106 gallons per minute
(0 to 401 liters per minute)
BAR
MODEL S15 Metallic Performance Curve
Suction/Discharge Port Size
• 1½" NPT (internal)
• 1½" BSP Tapered (internal)
• 1½" ANSI 150# Raised Face Flanges
0
425
CAPACITY
Materials
Material Profile:
Operating
Temperatures:
Polypropylene: A thermoplastic polymer. Moderate tensile
and flex strength. Resists stong acids and alkali. Attacked by
chlorine, fuming nitric acid and other strong oxidizing agents.
180°F
82°C
32°F
0°C
PVDF: (Polyvinylidene Fluoride) A durable fluoroplastic with
excellent chemical resistance. Excellent for UV applications.
High tensile strength and impact resistance.
250°F
121°C
0°F
-18°C
Santoprene®: Injection molded thermoplastic elastomer with
no fabric layer. Long mechanical flex life. Excellent abrasion
resistance.
275°F
135°C
-40°F
-40°C
UHMW PE: A thermoplastic that is highly resistant to a broad
range of chemicals. Exhibits outstanding abrasion and impact
resistance, along with environmental stress-cracking resistance.
180°F
82°C
-35°F
-37°C
Urethane: Shows good resistance to abrasives. Has poor
resistance to most solvents and oils.
150°F
66°C
32°F
0°C
Virgin PTFE: (PFA/TFE) Chemically inert, virtually impervious.
Very few chemicals are known to chemically react with PTFE;
molten alkali metals, turbulent liquid or gaseous fluorine and
a few fluoro-chemicals such as chlorine trifluoride or oxygen
difluoride which readily liberate free fluorine at elevated
temperatures.
220°F
104°C
-35°F
-37°C
CAUTION! Operating temperature limitations are as follows:
Max.
Min.
Conductive Acetal: Tough, impact resistant, ductile. Good
abrasion resistance and low friction surface. Generally inert, with
good chemical resistance except for strong acids and oxidizing
agents.
190°F
88°C
-20°F
-29°C
EPDM: Shows very good water and chemical resistance. Has
poor resistance to oils and solvents, but is fair in ketones and
alcohols.
280°F
138°C
-40°F
-40°C
FKM: (Fluorocarbon) Shows good resistance to a wide range
of oils and solvents; especially all aliphatic, aromatic and
halogenated hydrocarbons, acids, animal and vegetable oils.
Hot water or hot aqueous solutions (over 70°F(21°C)) will
attack FKM.
350°F
177°C
-40°F
-40°C
Hytrel®: Good on acids, bases, amines and glycols at room
temperatures only.
220°F
104°C
-20°F
-29°C
Neoprene: All purpose. Resistance to vegetable oils. Generally
not affected by moderate chemicals, fats, greases and many
oils and solvents. Generally attacked by strong oxidizing acids,
ketones, esters and nitro hydrocarbons and chlorinated aromatic
hydrocarbons.
200°F
93°C
-10°F
-23°C
Nitrile: General purpose, oil-resistant. Shows good solvent, oil,
water and hydraulic fluid resistance. Should not be used with
highly polar solvents like acetone and MEK, ozone, chlorinated
hydrocarbons and nitro hydrocarbons.
190°F
88°C
-10°F
-23°C
Metals:
Nylon: 6/6 High strength and toughness over a wide
temperature range. Moderate to good resistance to fuels, oils
and chemicals.
180°F
82°C
32°F
0°C
Stainless Steel: Equal to or exceeding ASTM specification A743 CF-8M for corrosion
resistant iron chromium, iron chromium nickel and nickel based alloy castings for
general applications. Commonly referred to as 316 Stainless Steel in the pump industry.
Maximum and Minimum Temperatures are the limits for which these materials can be operated.
Temperatures coupled with pressure affect the longevity of diaphragm pump components.
Maximum life should not be expected at the extreme limits of the temperature ranges.
Alloy C: Equal to ASTM494 CW-12M-1 specification for nickel and nickel alloy.
For specific applications, always consult the Chemical Resistance Chart.
Ambient temperature range: -20°C to +40°C
Process temperature range: -20°C to +80°C for models rated as category 1 equipment
-20°C to +100°C for models rated as category 2 equipment
In addition, the ambient temperature range and the process temperature range do not exceed the operating temperature range of the applied non-metallic parts as listed in the manuals of the pumps.
www . sandpiperpump . com
s15mdl1ds-rev0313
Model S15 Metallic • 2
Dimensional Drawings
S15 Metallic - NPT
Dimensions in inches (mm dimensions in brackets). Dimensional Tolerance:±1/8" (± 3mm)
The dimensions on this drawing are for reference only. A certified drawing can be requested if physical dimensions are needed.
16.65
16.65
422.95
422.95
16.65
422.95
2.25
2.25
57.15
57.15
2.25
57.15
11.19
11.19
284.16
284.16
11.19
284.16
111/2
1/2NPT
NPTDISCHARGE
DISCHARGEPORT
PORT
1 1/2 NPT DISCHARGE PORT
1"1"NPT
NPTEXHAUST
EXHAUSTPORT
PORT
1" NPT EXHAUST PORT
20.83
20.83
529.20
529.20
20.83
529.20
22.13
22.13
562.09
562.09
22.13
562.09
20.83
20.83
529.20
529.20
20.83
529.20
9.53
9.53
242.16
242.16
9.53
242.16
11.71
11.71
297.55
297.55
11.71
297.55
111/2
1/2NPT
NPTSUCTION
SUCTIONPORT
PORT
1 1/2 NPT SUCTION PORT
2.18
2.18
55.39
55.39
2.18
55.39
1"1"NPT
NPTEXHAUST
EXHAUSTPORT
PORT
1" NPT EXHAUST PORT
.63
.63
16
16
.63
16
9.88
9.88
250.83
250.83
9.88
250.83
R.25
R.25
6.35
6.35
R.25
6.35
8.00
8.00
203.20
203.20
8.00
203.20
2.18
2.18
55.39
55.39
2.18
55.39
2.25
2.25
57.15
57.15
2.25
4.00
4.00
57.15
101.60
101.60
4.00
101.60
8.00
8.00
203.20
203.20
8.00
203.20
7.00
7.00
177.80
177.80
7.00
177.80
4.94
4.94
125.46
125.46
4.94
125.46 12.06
12.06
AIR
AIRINLET
INLET
3/4"
3/4"NPT
NPT
AIR INLET
3/4" NPT
4.00
4.00
101.60
101.60
4.00
101.60
306.44
306.44
12.06
306.44
3 • Model S15 Metallic
www . sandpiperpump . com
s15mdl1ds-rev0313
Dimensional Drawings
S15 Metallic - ANSI Flange
Dimensions in inches (mm dimensions in brackets). Dimensional Tolerance:±1/8" (± 3mm)
The dimensions on this drawing are for reference only. A certified drawing can be requested if physical dimensions are needed.
11.19
11.19
284.16
284.16
11.19
284.16
16.63
16.63
422.28
422.28
16.63
422.28
4.68
4.68
118.87
118.87
4.68
118.87
24.85
24.85
631.19
631.19
24.85
631.19
22.91
22.91
581.91
581.91
22.91
581.91
20.41
20.41
518.41
518.41
20.41
518.41
9.41
9.41
238.95
238.95
9.41
13.41
13.41
340.55
340.55
13.41
340.55
2.00
2.00
50.80
50.80
2.00
238.95
DISCHARGE
DISCHARGEPORT
PORT
111/2"
1/2"RF
RF150#
150#ANSI
ANSI
DISCHARGE
PORTEQ.
5/8"
5/8"DIA,(4)
DIA,(4)HOLES
HOLES
EQ.SPC'D
SPC'D
1
1/2"
RF
150#
ANSICIRCLE
ON
ON3.88"
3.88"DIA.
DIA.BOLT
BOLT
CIRCLE
5/8" DIA,(4) HOLES EQ. SPC'D
ON 3.88" DIA. BOLT CIRCLE
20.41
20.41
518.41
518.41
20.41
518.41
SUCTION
SUCTIONPORT
PORT
111/2"
1/2"RF
RF150#
150#ANSI
ANSI
SUCTION
PORT
5/8"
5/8"DIA.,(4)
DIA.,(4)
HOLES
HOLESEW.
EW.SPC'D.
SPC'D.ON
ON
1
1/2"DIA.
RF BOLT
150#
3.88"
3.88"
DIA.
BOLTANSI
CIRCLE
CIRCLE
5/8" DIA.,(4) HOLES EW. SPC'D. ON
3.88" DIA. BOLT CIRCLE
22.41
22.41
569.21
569.21
22.41
569.21
50.80
.38
.38
9.53
9.53
.38
3.00
3.00
9.53
76.20
76.20
3.00
2.00
2.00
50.80
50.80
2.00
50.80
2.00
2.00
50.80
50.80
2.00
50.80
76.20
12.88
12.88
327.03
327.03
12.88
4.94
327.03 4.94
125.41
125.41
4.94
125.41
1"
1"NPT
NPTEXHAUST
EXHAUSTPORT
PORT
1" NPT EXHAUST PORT
4.68
4.68
118.87
118.87
4.68
118.87
12.87
12.87
326.90
326.90
12.87
326.90
MOUNTINGHOLES
HOLES
.50
.50 MOUNTING
12.70
12.70
.50 MOUNTING HOLES
12.70
R.25
R.25
6.35
6.35
R.25
6.35
10.61
10.61
269.49
269.49
10.61
269.49
7.00
7.00
177.80
177.80
7.00
177.80
3.00
3.00
76.20
76.20
3.00
76.20
4.00
4.00
6.44
6.44
101.60
101.60
163.45
4.00 163.45
6.44
101.60 163.45
6.44
6.44
163.51
163.51
6.44
12.87
12.87
326.90
326.90
12.87
326.90
AIR
AIRINLET
INLET
3/4"
3/4"NPT
NPT
AIR INLET
3/4" NPT
9.88
9.88
250.83
250.83
9.88
250.83
BOTTOM
BOTTOMVIEW
VIEW
163.51
BOTTOM VIEW
www . sandpiperpump . com
s15mdl1ds-rev0313
Model S15 Metallic • 4
Written Warranty
5 - YEAR Limited Product Warranty
Quality System ISO9001 Certified • Environmental Management Systems ISO14001 Certified
Warren Rupp, Inc. (“Warren Rupp”) warrants to the original end-use purchaser that no product sold by
Warren Rupp that bears a Warren Rupp brand shall fail under normal use and service due to a defect in material
or workmanship within five years from the date of shipment from Warren Rupp’s factory. Warren Rupp brands
include SANDPIPER®, MARATHON®, PortaPump®, SludgeMaster™ and Tranquilizer®.
~ See complete warranty at www. sandpiperpump.com/About/guaranteesandwarranties.html ~
Declaration of Conformity
Manufacturer: Warren Rupp, Inc.®, 800 N. Main Street, P.O. Box 1568,
Mansfield, Ohio, 44901-1568 USA
Certifies that Air-Operated Double Diaphragm Pump Series: HDB, HDF, M Non-Metallic,
S Non-Metallic, M Metallic, S Metallic, T Series, G Series, U Series, EH and SH High Pressure,
RS Series, W Series, SMA and SPA Submersibles, and Tranquilizer Surge Suppressors comply with
the European Community Directive 2006/42/EC on Machinery, according to Annex VIII.
This product has used Harmonized Standard EN809:1998+A1:2009, Pumps and Pump Units
for Liquids - Common Safety Requirements, to verify conformance.
Signature of authorized person
October 20, 2005
Date of issue
David Roseberry
Printed name of authorized person
Engineering Manager
Title
Revision Level: F
August 23, 2012
Date of revision
EC Declaration of Conformity
In accordance with ATEX Directive 94/9/EC,
Equipment intended for use in potentially explosive environments.
Manufacturer: Warren Rupp, Inc.®, A Unit of IDEX Corportion
800 North Main Street, P.O. Box 1568, Mansfield, OH 44901-1568 USA
EN 60079-25: 2004
For pumps equipped with Pulse Output ATEX Option
KEMA Quality B.V. (0344)
Applicable Standard:
EN13463-1: 2001,
EN13463-5: 2003
AODD Pumps and Surge Suppressors
For Type Examination Designations
AODD (Air-Operated Double Diaphragm) Pumps
EC Type Examination Certificate No. Pumps: KEMA 09ATEX0071 X
KEMA Quality B.V.
Utrechtseweg 310
6812 AR Arnhem, The Netherlands
DATE/APPROVAL/TITLE:
27 MAY 2010
EC Declaration of Conformity
David Roseberry, Engineering Manager
David Roseberry, Engineering Manager
DATE/APPROVAL/TITLE:
27 MAY 2010
ATEX Summary of Markings
Type
Marking
Listed In
Non-Conductive
Fluids
AODD (Air-Operated Double Diaphragm) Pumps
EC Type Examination Certificate No. Pumps: KEMA 09ATEX0071 X
KEMA Quality B.V.
Utrechtseweg 310
6812 AR Arnhem, The Netherlands
Pump types, S1F, S15, S20,
and S30 provided with the
pulse output option
KEMA 09ATEX0071 X KEMA 09ATEX0071 X
II 2 G Ex ia c IIC T5
CE 0344
II 3/2 G Ex ia c IIC T5
KEMA 09ATEX0071 X
II 2 D Ex c iaD 20 IP67 T100oC
KEMA 09ATEX0071 X
No
Yes
Yes
Pump types, S1F, S15, S20,
and S30 provided with the
integral solenoid option
II 2 G EEx m c II T5
II 3/2 G EEx m c II T5
II 2 D c IP65 T100oC
KEMA 09ATEX0071 X KEMA 09ATEX0071 X
CE 0344
KEMA 09ATEX0071 X
KEMA 09ATEX0071 X
No
Yes
Yes
Pump types, HDB1½, HDB40,
HDB2, HDB50, HDB3, HDF1,
HDF25, HDF2, HDF3M, PB¼,
S05, S1F, S15, S20, S30, SB1,
SB25, ST1½, ST40, G15, G20,
and G30, without the above
listed options, no aluminum
parts
II 1 G c T5
II 3/1 G c T5
II 1 D c T100oC
I M1 c
I M2 c
KEMA 09ATEX0071 X KEMA 09ATEX0071 X
KEMA 09ATEX0072 X KEMA 09ATEX0071 X
CE 0344
KEMA 09ATEX0071 X
KEMA 09ATEX0071 X
KEMA 09ATEX0072 X
No
Yes
Yes
No
Yes
Pump types, DMF2, DMF3,
HDB1½, HDB40, HDB2,
HDB50, HDB3, HDF1, HDF25,
HDF2, HDF3M, PB¼, S05, S1F,
S15, S20, S30, SB1, SB25,
SE½, ST1, ST25, ST1½, ST40,
U1F, G05, G1F, G15, G20, and
G30
II 2 G c T5
II 3/2 G c T5
II 2 D c T100oC
KEMA 09ATEX0072 X KEMA 09ATEX0072 X
CE
KEMA 09ATEX0072 X
KEMA 09ATEX0072 X
No
Yes
Yes
Surge Suppressors all types
II 2 G T5
II 3/2 G T5
II 2 D T100oC
AODD Pumps and Surge Suppressors
For Type Examination Designations, see page 2 (back)
EN 60079-25: 2004
For pumps equipped with Pulse Output ATEX Option
KEMA Quality B.V. (0344)
Applicable Standard:
EN13463-1: 2001,
EN13463-5: 2003
Manufacturer: Warren Rupp, Inc.®, A Unit of IDEX Corportion
800 North Main Street, P.O. Box 1568, Mansfield, OH 44901-1568 USA
In accordance with ATEX Directive 94/9/EC,
Equipment intended for use in potentially explosive environments.
EC Declaration of Conformity
EC Type Certificate No. Pumps: KEMA 09ATEX0071 X
Type Certificate No. Pumps: KEMA 09ATEX0072 X
Type Certificate No. Suppressors: KEMA 09ATEX0073
KEMA 09ATEX0073
CE
KEMA 09ATEX0073
KEMA 09ATEX0073
KEMA 09ATEX0073
No
Yes
Yes