Product Sheet Brochure

Comments

Transcription

Product Sheet Brochure
THE
TOUGHEST
TANK
in the Industry!
LBT
Inc.
11502 I Street
Omaha, NE 68137
PH:
1.402.333.4900
FAX: 1.402.333.0685
www.lbt-inc.com
Petroleum –
Large
Petroleum – Large
ESTIMATED WEIGHT SUMMARY
75880#
Payload 12239 Gals. @ 6.2 #/Gal.
95.1% Shell Full
Tank
6910#
*Trailer
13920
Max. Load
88000#
7010#
Chassis
102000#
GVWR
Tractor
17200
22700#
GAWR
107000#
Total
* Trailer weight does not include any customer added equipment such as hoses, fittings, etc.
** 70 Gallons minimum outage provided in each compartment.
NOTE: DRAWING NOT TO SCALE
LET.
REVISIONS
MODEL: TAG-HA3-ESF12500x5SB Sheet 1 of 1
CONSTRUCTION: ALUMINUM
(102” WIDTH)
THIS UNIT IS ENGINEERED AND CONSTRUCTED OF MATERIALS SHOWN TO HAUL THE COMMODITIES
INDICATED AND IS INTENDED FOR OPERATION AT REASONABLE SPEEDS UNDER NORMAL ROAD
CONDITIONS, NO RESPONSIBILITY SHALL BE ASSUMED BY LBT, INC. FOR:
1. WEIGHTS OR CAPACITY OF TRACTOR.
2. OVERLOADS OR DAMAGE IF COMMODITY WEIGHTS EXCEED THOSE SHOWN OR MODEL RATING.
3. DAMAGE CAUSED BY COMMODITIES, CLEANING, OR OPERATION NOT COMPATIBLE WITH
MATERIALS OF OF CONSTRUCTION SPECIFIED. SEE ATTACHED SHEET(S) FOR SPECIFICATIONS.
OPERATION NEW YORK W/ PERMIT
REF:
ENG.
DATE
LBT
Inc.
CHASSIS FRAME – Stainless steel wide track huck bolted to tank frame
UNDERCONSTRUCTION – Hendrickson AAT 25K Intraax w/“HP” spindles
COATINGS – Galvanized hangers and Soft Coat suspension finish
BRAKE SYSTEM – Haldex 4S/3M ABS with “TRS” Roll Stability
HUBS & DRUMS – Walther EMC Dura-Light with cast drums
WHEELS – (12) 22.5 x 8.25 Aluminum, (6) MF, (6) polished
TIRES – (12) 295/75R22.5(G) trailer type
FENDERS – Aluminum front and rear with rubber bushed mountings
SPLASHGUARDS – LBT, Inc. mounted separate from fenders
BUMPER – Stainless steel DOT with bolt on aluminum overlay
CAPACITY – 12,500 gallons + 70 gallons minimum per compartment
BULKHEADS – Single
COMPARTMENTS – Five, 3000-1000-2000-1500-5000 front to rear
CONSTRUCTION – Straight frame, polished sides and end heads
MANHOLES – Betts 20” x 10” strongback style in each compartment
LADDER – Aluminum with risers extended for grabhandles
HOSE CARRIERS – (5) 8” x 21’ hose tubes, (3) curbside, (2) roadside
FITTING CABINET – (1) 48” x 27” x 32” with locking “T”-handle
PAINT – High Solids Urethane Silver on steel components
11502 I Street
Omaha, NE 68137-1210
PH: 1.402.333.4900
FAX: 1.402.333.0685
CUSTOMER
DEALER
COMMODITY
CAPACITY
DATE
GASOLINE, FUEL OIL
**12500 GALS
BY
BKZ 9935
LIGHTS & WIRING – Betts flanged LED’s, center marker turn signals
LIGHT BOXES – Bolt on aluminum
SUMPS – Formed from plate and double welded
EMERGENCY VALVES – Betts 4” air-operated with grooved outlets
DISCHARGE PIPING – 4-½“ OD, smooth, long radius mandrel bends
MANIFOLD – Fabricated, w/cast crosses and tees and (4) Wet-R-Dri valves
PUMP-OFF LINE – (1) 3” to front curbside, Wet-R-Dri valves on both ends
DISCHARGE VALVES – Bayco openable bottom loading adapters
SIGHT GLASSES – (5) ethanol resistant behind bottom loading adapters
OUTLET FITTINGS – (2) 4” x 4” off loading couplers
PRODUCT LEVEL SENSORS – Flo-Tech CheckMate with EZCept
SENSING SYSTEM EXTRAS – Ground Bolt
VAPOR VENTS – 3” air operated vapor vent in each manhole cover
VAPOR RETURN – (2) 4” curbside outlets, (1) at rear, (1) at discharge
VAPOR CROSSOVER – (1) 3” to roadside
VAPOR SYSTEM VENTING – (1) 1-¼ “ pressure relief vent
BRAKE INTERLOCK – Aluminum gate and individual on rear line
NOTES: Tank in photo on reverse side may include optional equipment.
Sketch above shows a typical standard model.

Similar documents

Product Sheet Brochure

Product Sheet Brochure HUBS & DRUMS – Walther EMC Dura-Light with cast drums

More information

Product Sheet Brochure

Product Sheet Brochure * Trailer weight does not include any customer added equipment such as hoses, fittings, etc. MATERIALS OF OF CONSTRUCTION SPECIFIED. SEE ATTACHED SHEET(S) FOR SPECIFICATIONS.

More information