FILTRATION • SEPARATION eadslink.com
Transcription
FILTRATION • SEPARATION eadslink.com
F I LT R AT I O N • S E PA RATION eadslink.com The Eads Company is a distributor/manufacturers’ representative founded in 1953 supporting Texas’ Industrial markets with engineering products and application specific solutions of Instrumentation & Controls, Filtration & Separation, Valves & Automation and Specialty Process Equipment. A combination of quality products, ISO 9001:2008 work processes and value-added services provides Eads customers with a distinct advantage. That advantage occurs as a customer with specific need communicates with one of the knowledgeable Eads teams that offers technical resources, local inventories, and 24/7 customer service. Throughout Texas Eads qualified technical teams listen carefully to each customer’s specific requirements and provide friendly assistance, often recommending an engineered solution that economically meets both requirement and expectation. At Eads we believe that our success as an organization depends upon a commitment, and the ability, to deliver tangible value to all customers such that at the end of the day each in some way has a stronger position due to our efforts. MANUFACTURER SELECTION CHART Parker Racor Royal ● ● ● Yardney Parker Process Parker Finite Krebs Hilco ● Koch Graver ● Keckley Global Filter Falls Filtration Eaton Filtration Donaldson Clark Reliance BHA Avantech Airguard ● Liquid Process Filtration Disposable Cartridges ● ● Disposable Bags ● Disposable Membranes ● ● ● ● Liquid/Liquid Separators ● ● ● Liquid/Liquid Coalescers ● ● ● ● Air/Gas Filtration Disposable Cartridges ● ● ● ● Radial Fin Cartridges ● Gas/Lquid Separators ● ● ● ● ● Dust Bags/Cartridges Silencers/Mufflers/Vent Filters ● ● ● ● Panel Filters Gas/Liquid Coalescers ● ● ● ● ● ● ● ● ● ● ● ● Specialty Systems and Equipment Strainers ● ASME Filter Vessels Skid Mounted Systems ● ● ● ● ● Backwashable Systems ● Mechanically Cleaned Systems ● ● ● ● ● Sand and Multi-media Beds ● ● Change-over Valves ● ● ● Carbon Beds Dust Collector Systems ● ● Hydrocyclones RO Systems ● ● ● ● ● ● ● 1.800.843.3237 ● Services Factory labs are of the finest and most well equipped in the process filtration industry: • Scanning Electron Microscope • High Performance Liquid Chromatography • High Resolution Microscopy • Energy Dispersed X-Ray Spectrometry • Gas Chromatography • Purometry Media Analysis • Inductively Coupled Plasma Mass Spectrometry • Particle Counting • Tensile Strength Testing Laboratory analysis of your process fluid including: • Total Suspended Solids • Nature of Contaminant • Spent Media Analysis • Total Dissolved Particles • Dirt Holding Capacity • Chemical Compatibility • Total Organic Carbon • Particle Size Distribution • Sealing Efficiency • Non-Volatile Residue Water/Air Flow Rate • Chemical Concentration • Surface Area/Depth Utilization • Particle Surrounding Filter surveys/cost saving analysis: • Identify And Tag All Filter Applications • Recommend Most Cost Effective Technology • Document process conditions • Document Cost Savings Inventory Management Multiple Warehouse Locations For Deliveries/Same Day Services Consignment Inventory Capable Same Day/On Time Shipments Optimization Of Inventory For Multi-Site Needs Capable Of Handling All of Your Filtration Needs Edi Capable 24 Hour On Call Service Custom Vessels Fabrication Functionally Equivalent Crossovers LIQUID FILTERS 3M AFFCO American Felt & Filter Ametek Aqua Pure Baldwin Barneby & Sutcliffe Bowser Cellulo Cimtek Clark Filter Cuno Custom Papers Dahl Domnick Hunter Donaldson Eden Everpure Facet Fairley Arlon Filter Mart Filterite Filtrex Fleetguard Flo Ezy Fluid Dynamics FPI Fram FSI GAF Harmsco Hayward Hytrex Hytrex Johns Manville Jonell Kaydon Keene Keystone King Tool Knight Kriasel Lakos LeSac Mart Marvel Matrix Separations Meissner Memcor Millipore Mott MSI NAFCO Nelson Norman Nowata Nuclepore Nugent Osmonics Pall PECO Porous Media ProGuard PTI Quantek Racor Refilco Rosean Rosedale Sartorious Schroeder SCT Serfilco Sethco Sparkler Stauff Strainrite United Engine Life United Vickers Vokes Western AGET Air Refiner Airsan American Air Filter Balston Banner Barnabey & Sutcliffe Clark Columbus Industries Deltech Dollinger Donaldson Endustra Extraction Systems Farr Fleetguard Fram Hankison Hefco Keitec Koch Midwesco NAFCO Norgren Norman Shawndra Solberg Sparks Standard Sunshine Technola Torit Ultra Air Unisorb Universa Watts Wilkerson Zeks AIR, GAS AND DUST COLLECTION FILTERS eadslink.com Disposable Filter Technologies For Process Liquids Cartridges Depth Style • Media including string wound, melt blown, resin bonded, sintered metal style elements • Available in a wide range of materials including cotton, polypropylene, polyester, fiberglass, acrylic, rayon, nylon, stainless steel • Manufacturers: Parker, Global, Eaton, Purolator Pleated Style • Pleated formulations including standard pleat, controlled radius pleat, and select pleat style elements with a wide range of geometries and end cap configurations • A large selection of materials including cotton, polypropylene, polyester, fiberglass, acrylic, rayon, nylon, and stainless steel • Manufacturers: Parker, Global, Eaton, Hilco, and Graver Liquid Bags • Options include snap ring, quick seal, sentinel ring, sewn seam, welded seam, monofilament, multifilament, felt, and pleated construction. Efficiencies range from nominal mesh screens to absolute ratings below 5 micron • Nominal, high efficiency, and pleated • Available in a wide range of materials including polypropylene, polyester, nylon, nomex, PTFE, and wool • Manufacturers: Parker, Eaton, and Filter Technologies Membrane Technologies • Available materials include composite polyamide, polyethersulfone, polysulfone, nylon, and Teflon® • Process and R/O style • Manufacturers: Parker, Global, Tri-Sep and Eaton Coalescers/Separators • Options include knock out drums, mesh pads, vane packs, centrifugal elements, multi-cyclones, depth coalescers, and pleated coalescers • Efficiencies range from bulk liquid removal down to .2 micron absolute • Manufacturers: Clark Reliance, Graver, Hilco, Global, and Royal 1.800.843.3237 Disposable Filter Technologies For Process Air & Gas Cartridges • Standard and radial fin configurations • Many hardware and media material options available • Pleated and depth cartridges • Sewn end, molded end, and metal end caps • Nominal to high efficiency sub-micron ratings • Manufacturers: Graver, Parker Finite, Donaldson, Airguard, Koch, Hilco, and Royal Panel Filters • Depth and pleated style. • Many hardware and media material options • Wide variety of sizes and shapes • Nominal to high efficiency sub-micron ratings • Manufacturers: Graver, Donaldson, Airguard, Koch, and Air Filters Inc. Dust Collector and Turbine Intake Media • Depth bags and pleated cartridges. • For both bottom and top loaded collector systems • Manufacturers: BHA, Donaldson, and Filter Technology Coalescers/Separators • Options include knock out drums, mesh pads, vane packs, centrifugal elements, multi-cyclones, depth coalescers, and pleated coalescers • Efficiencies range from bulk liquid removal down to .2 micron absolute • Manufacturers: Clark Reliance, Graver, Hilco, Global, Royal, and Finite eadslink.com Specialty Systems and Equipment Strainers • Cast simplex and duplex • Fabricated basket and tee • Temporary • Backwashable and mechanically cleaned designs • Carbon steel, stainless steel, monel, titanium, and lined options with optional pressure ratings ASME certified or B31.3 construction available • Manufacturers include Eaton, Mueller, and Keckley • ASME filter vessels and skid mounted systems • Custom vessels fabricated to customer specifications Hydrocyclone and Multi-Cyclone • Solids/liquid or liquid/liquid separation systems • Custom designed to customer specifications 1.800.843.3237 Specialty Systems and Equipment Mechanically Cleaned Filters • Maintains a low, constant differential pressure • Removes solids from screen & out of the liquid flow • Throughput levels are maintained • Reduces solid waste volume • Eliminates the cost to purchase disposable filters • Product losses are reduced • Minimizes worker & workplace exposure • Reduces filtration variability and media breakage • Decreases contaminate & gel extrusion through the media Backwashable Filters • Modular design for better use of backwash • Durable surface filter elements • Minimal backwash requirement • For use in catalyst bed protection, amine, cooling tower and process applications Sand/Multimedia/Carbon Bed Systems Change-Over Valves • Reduces the number of valves required on skidded systems • Reduces footprint • Facilitates cartridge change-outs eadslink.com EADS Distribution Corporate Office P.O. Box 36448 Houston, Texas 77236-6448 13843 N. Promenade Blvd., Suite 100 Stafford, Texas 77477 281.243.2900 Main 281.240.2068 Fax 281.240.2069 Accounting Fax [email protected] BRANCH OFFICES Corpus Christi Freeport Golden Triangle 606 Savage Lane 6810 East Hwy 332 2682 Hwy 69 North Corpus Christi, TX 78408 Freeport, TX 77541 Nederland, TX 77627 361.883.5469 979.233.6301 409.722.5020 361.883.5408 Fax Houston No. 281.393.1837 409.721.9848 Fax 800.294.1837 979.233.0037 Fax [email protected] [email protected] [email protected] Houston Longview North Texas 13843 N. Promenade Blvd., Ste 100 3008 W Marshall Ave, Ste G 11220 Grader Street, Ste 400 Stafford, TX 77477 Longview, TX 75604 Dallas, TX 75238 281.243.2900 903.757.7088 214.341.3401 281.240.2068 Fax 903.757.2176 Fax 214.341.2535 Fax 281.240.2069 Accounting Fax 800.388.9447 800.742.8099 [email protected] [email protected] [email protected] Texas City West Texas 213 Sixth Street North 5601 North Dixie Texas City, TX 77590 Odessa, TX 79762 409.945.4828 432.366.1388 409.945.5110 Fax 432.366.1907 Fax [email protected] [email protected] eadslink.com Rev. 7/14