6 rechargeable candles

model RC6C
C.
SETTING UP (cont’d)
Usually it takes about 8-12 hours for full
charge. However this also varies depending
on how much/long a tea light has been used.
Let the candles charge for 24 hours. After the
charging period is done remove the candles
from the base and switch the candles to on
using the switch located at the bottom of each
candle. To complete the conditioning process
let each candle remain lit for 12 hours. Then
charge again for 12 hours. This will give the
battery the longest life, by increasing the
batteries internal memory.
USE:
After second charge it is not neccessary to
charge for 12 hours everytime.
When second charge is complete remove
candles from base and turn each candle on.
To turn candle on simply press the button on
the bottom of each candle.
OTHER GREAT LED CANDLES PRODUCTS FROM VIATEK
Directions for Use
6 RECHARGEABLE CANDLES
recharging base and votives not included
RC3WR-M
Round Bees Wax Set
For use with Electronic
Tea-Lights
Set of 3
4 in / 5 in / 6 in
RC3WS-M
Square Bees Wax Set
For use with Electronic
Tea-Lights
Set of 3
4 in / 5 in / 6 in
RCC6-M
LED Color Change Tea-Lights
Set of 6
Amber, Red, Green, Multi-Color
ARGE
LED CH TOR
INDICA
NOTE:
WAX PRODUCTS ARE NOT INTENDED FOR USE WITH ACTUAL TEA LIGHTS.
For decorative options please visit us
online.
US: viatekproducts.com
UK: viatekgroup.com
888-7VIATEK
407.248.0123
011 +44.207.350.2020
MADE IN CHINA
revinstructRC6M/0107
(3)
PARTS DIAGRAM:
Dear Valued Customer,
Thank you and congratulations on your purchase
of this innovative product. We back our product
with a Viatek certified warranty. Your satisfaction
is very important to us.
SETTING UP:
Before using the Rechargeable candles place each
candle on the charging base. Plug the adapter into
the Charging base and the pronged end of the AC
adapter into a standard wall outlet. Diagram A& B.
6 LED rechargeable
tea-light candles
A.
place candles
here
DC plug
The charging base RED LED will light when charging
and will remain lit while charging is in progress. If
charging base RED LED does not light, turn the
candles in a clockwise or counterclockwise direction
while they are set in the charging base until charging
base RED LED lights up.
For operational questions or replacement parts
please call: 888-7VIATEK or contact your local
VIATEK dealer.
Visit us on the web at www.viatekproducts.com for
new product updates and information. Also please
email us with any comments or questions at
[email protected]
Charging base LED may go out when you remove a
candle(s), if the Charging base LED goes out after
removing a candle(s) simply turn the rest as
indicated above until the Charging base LED turns
back on. When candles have made good contact a
RED LED will light inside the candle.
We look forward to serving you, now and in the
near future.
Enjoy your Viatek Designed Product!
Kelli M. Lentine
B.
Kelli M. Lentine
President
888-7 VIATEK
US: viatekproducts.com
UK: viatekgroup.com
888-7VIATEK
407.248.0123
011 +44.207.350.2020
(1)
US: viatekproducts.com
UK: viatekgroup.com
888-7VIATEK
407.248.0123
011 +44.207.350.2020
(2)