Product Description - Mercedes

Transcription

Mercedes-Benz
Passenger Car and Commercial Vehicle Sales Formats
Instructions and Standards
Details
5 Material and Color
5.1
5.1.
Materials – Colors – Products
Showroom and Customer Areas
Product Description
As per October 2002
Table of Contents
General Description
Frame System: Main Girders and Purlins
Frame System: Columns and Column Head
Frame System: Ceiling
Façade System: Mullion and Transom Façade
Façade System: Wall Sections
Façade System: Solar Protection
Façade System: Main Entrance
Internal Walls/Columns: Concrete, Masonry, Gypsum Board
Internal Walls/Columns: Doors in Internal Walls
Stairs
Flooring
Detailed Product Description
5
6
7
8
9
10
11
12
13
14
15
Mercedes-Benz Sales Formats – 5.1.1 Materials – Colors – Products / Showroom / Product Description
Micaceous Iron Ore, GEHOLIT + WIEMER
White Aluminum, Cobalt Blue, GEHOLIT + WIEMER
Ceiling Coatings, Sto
Mineral Fiber Boards, Armstrong
Metal Coffered Ceiling, Armstrong
Ceiling Coatings External, Sto
Ceiling Coatings Interior, Sto
Wall Tiles, Villeroy & Boch
Floor Tiles, Villeroy & Boch
Floor Tiles, Impronta Italgraniti
Floor Tiles, Marazzi
Floor Tiles, R.A.K. Ceramics
Multicolor Floor Coating, Sto
Textile Floor Covering, Anker
Textile Floor Covering, DESSO DLW Textil
Textile Floor Covering, Object Carpet
Laminate, Witex
Multi-layer Parquet, Object Parkett
Entrance Mats, Kampmann, EMCO, Coronet,
DESSO DLW Textil
Door Furniture, Hewi, FSB
Solar-Protection Glass, Pilkington
External Awnings, Warema
Translucent Interior Roller Blinds, Silent Gliss
16
17
18
20
22
26
27
32
33
38
42
48
52
56
60
66
70
74
79
80
84
85
86
Preface
The short description of the choice of colors and materials for the showroom and
customer areas, presented in Chapter 5.1, shall now be described in detail in the
following chapter and supplemented with product details.
The details apply to the following Autohaus formats:
l the Mercedes-Benz Center
l the Mercedes-Benz Autohaus
l the Mercedes-Benz Service
The use of the materials and colors covers the following Autohaus areas:
l passenger car and commercial vehicle showrooms with integrated office areas
l showrooms for new and used vehicles
l passenger car and commercial vehicle customer service reception, including
info, shops and café
l open vehicle ports for vehicle presentation
l express service
4
Frame System
Main Girders and Purlins
Main Girders and Purlins
Detailed Product Description
The girders illustrate technical orientation and have a filigree look. Steel or
steel-plate is the material specified for the whole of the frame construction.
For spans between 16.20 m to 30.00 m, the girders shall be constructed as
truss girders with vertical webs and open, almost square profiles to give that
filigree look.
For spans under 16.20 m, one-dimensional girders with round holes can be
used instead of the truss girders.
The girder and purlin ends have the identical dimensioned filigree look for all
roof forms and building sizes.
Where one dimensional girders are used, the girders and purlins in the area
between columns and roof edge shall be constructed without holes.
l
l
Micaceous iron ore anthracite, GEHOLIT + WIEMER, see page 16
White aluminum, GEHOLIT + WIEMER, see page 17
Materials and Colors
l
Steel girders and column head plate:
micaceous iron ore anthracite, DB 703
l
Purlins:
white aluminum, RAL 9006
l
Fascia:
5
Frame System
Columns and Column Head
Columns and Column Head
Product Description
The free-standing external columns are optically expressive and articulate building elements which mark the covered external area in front of the façade. In the
internal areas, the columns shall only be highlighted, according to length, in the
accented areas.
l
l
Cobalt blue, GEHOLIT + WIEMER, see page 17
l
Round steel supports in front of or behind the façade:
cobalt blue, RAL 5013
l
Column head:
l
Column base:
stainless steel ring, brushed
6
Frame System
Ceiling
Ceiling
Product Description
Ceilings are characterized by the visible frame and are in bright neutral colors.
In areas with hard smooth surfaces (e. g., concrete ceilings), suspended ceilings
or individual elements shall be provided in order to optimize the room acoustics.
l
l
l
l
StoSilent Panel, Sto, see page 18
Mineral fiber boards, Armstrong, see page 20/21
Metal coffered ceiling, Armstrong, see page 22
l
Trapezoidal metal plate:
perforated, 100/275, E100
l
Suspended ceiling (under galleries and some building sections, e. g., Information): signal white, RAL 9003, or light gray, RAL-design-system 000 85 00
l
jointless acoustic ceiling system (corresponding to Sto, StoSilentPanel)
l
or metal coffered ceiling, perforated with mini-joints (corresponding to
Armstrong, Orcal, Clipin micro-perforated, alternatively extra micro-perforated,
in each case with acoustic fleece)
l
or mineral fiber boards (in ancillary rooms) (corresponding to Armstrong,
Prima Dune Plus micro look; for areas with very demanding acoustic standards:
Armstrong, Ultima micro look)
l
Concrete ceiling:
signal white, RAL 9003, or light gray, RAL-Design-System 000 85 00
7
Façade System
Mullion and Transom Façade
Mullion and Transom Façade
Product Description
The façade is a mullion and transom design construction with thermally separated profiles.
l
The profile width is fixed at a maximum of 8 cm. and the load-bearing mullion
depth calculated in accordance with structural engineering criteria. Up to a
profile depth of 20 cm, a right-angle, T or double-T profile is designated. Where
the depth exceeds 20 cm, profiles with a perforated web or mini-truss shall be
used.
The terminal strips shall be of aluminum, the load-bearing mullions of aluminum
or steel. The vertical terminal strips can have various profile forms or types of
construction: flat and U-profiles, with/without bolt covers. The horizontal profiles
should, however, be selected with a smaller depth.
l
Façade, portals (internal and external):
MB Center:
anthracite gray, RAL 7016, or micaceous iron ore gray, DB 703
l
Side doors, windows RWA flaps
slate gray, RAL 7015
l
Gable areas in the roof section (glass or smooth sheet plate):
8
Façade System
Wall sections
Wall sections
Product Description
The wall sections are contrasting and linking elements in the glass façade. Their
construction is an integral part of the mullion and transom system.
l
l
Fine-grained modeling plaster, Sto, see page 28
Wall coating external, color-wash technique, Sto, see page 26/27
As a rule, the wall sections shall be of light-weight construction, in special cases,
of solid construction (masonry or concrete).
The surfaces of the wall sections are plastered. They are always treated internally
and externally with a wash technique finish. The bases shall be constructed from
in-built stainless steel sheeting flush with the plaster.
MB Center: The façade of the brand gallery as a metal cylinder consists of a
closed, rounded stainless steel wall area with a minimum number of joints.
l
Internal and external areas are accented:
fine-grained modeling plaster, weather resistant outer coating, organically
bonded plaster (corresponding to Sto, Stolit MP natural, external)
or: mineral ceiling plaster (corresponding to Sto, StoMiral Nivell, internal/
external)
Color-wash technique, wall coating, matte surface
(corresponding to Sto, StoColor Crylan)
Blue 1 (MU 22949) and Blue 2 (MU 22950)
9
Façade System
Solar Protection
Solar Protection
Significant protection against the sun and over heating is provided by the roof
overhang and the ventilation flaps in the façade. Exterior sun blinds protect
against overheating; translucent interior blinds protect against glare. In addition,
it is a requirement that the uniform appearance and transparency of the Autohaus be retained. Any additional elements must accentuate the appearance of the
Autohaus as a whole without having a dominant effect. The showroom window
must remain transparent.
The reflective properties of the solar protection insulating glass clearly highlight
dirt. More frequent cleaning is therefore required. In order to prevent unwanted
absorption of radiation and thus additional over-heating, the glazing of the façade
should always be kept clean.
l
Translucent internal blinds for comprehensive protection against glare:
vapor-plated, translucent fabric (corresponding to SilentGliss, Alu Close,
color 30 silver or light screen, color 3 gray)
l
Light screens integrated in the work place
Product Description
l
l
l
Solar protection glass, Pilkington, see page 84
External awnings, WAREMA, see page 85
Internal blinds, Silent Gliss, see page 86
l
External awnings with thick textile fabric:
Markisolette motor-driven awning (corresponding to WAREMA,
type series 100, surfaces of the construction components RAL 9006,
white aluminum, screen fabric color 3517 gray)
l
Solar protection insulating glass:
Infrastop with neutral color coating in the intermediate and banderole areas
(corresponding to Pilkington, Infrastop, Neutral 51/37)
10
Façade System
Main Entrance
Main Entrance
A planked steel construction with customary profiles is planned for the construction of the main entrances. The construction is very simple, blends in exactly and
is separate from the main load-bearing construction. The element of the main
entrance which is accentuated in the vertical is the portal frame. It projects out
of and into the main facade at a constant depth. The sides of the portals are plastered and finished in the same way as the wall sections. The top sides are lined
with sheet metal.
The element of the main entrance which is accentuated in the horizontal is the
roof overhang. The clearly optically perceptible undersides and the top sides shall
be lined with sheet metal. The entrances shall always be constructed with a twoleaved door; either an automatic sliding door or a normal manually operated door
with revolving leaves. The draft excluder shall be formed by means of additional
glazed internal facade elements which can easily be added to at any later time.
l
Roof overhang edge:
l
Roof overhang top and underside:
l
Entrance/draft excluder flooring:
tiles as in showroom and entrance mat, laid flush in the flooring, aluminum
built-in profile with strip brushes and needle-felting strips, color black
or dark gray (corresponding to DESSO DLW, Protect or Coronet, CoroTec22
or Kampmann, type 5414 or Emco Diplomat 517/4RB)
l
Door handles:
stainless steel (corresponding to FSB, Oval series, 6616 or 6675 or 6635,
stainless steel color 6204, fine matte)
Product Description
l
Portal frame:
fine-grained modeling plaster, weather resistant external coating,
organically bonded plaster (corresponding to Sto, Stolit MP natural, external)
wall coating external and internal, color-wash technique, matte surface
(corresponding to Sto, StoColor Crylan)
Blue 1 (MU 22949) and Blue 2 (MU 22950)
l
l
l
l
l
l
l
Fine-grained modeling plaster, Sto, see page 27
Wall coating external/internal, color-wash technique, Sto, see page 27/29
Floor tiles, see pages 32–51
Entrance mat, DESSO DLW Textil, Kampmann, EMCO, Coronet, see page 79
Door fittings HEWI, see page 80/81
Door fittings FSB, see page 82/83
11
Internal Walls and Internal Columns
Concrete, Masonry, Gypsum Board
l
The surfaces of the internal walls are treated differently according to their position and expressivity. Colors have a signaling effect and serve to distinguish
easily between individual areas.
The interplay between neutral and bright colors in the internal areas gives the
Autohaus a characteristic radiance. Some areas are accented beside the neutral
subdued main areas of color. Walls and columns are maintained in the colors
white or light gray, accented areas are in the colors blue (entrance, information),
yellow (background color for the wall or wall section only for passenger cars
presentation) and apricot (waiting and bistro area).
Entrance areas, information: blue
Marmorino: Blu 1 (MF 00061), and /or color-wash technique:
blue 1 (MU 22949) and blue 2 (MU 22950)
l
l Presentation area vehicles (only passenger car operation): yellow
Marmorino: Giallo oro 1 (MF 00021) and /or color-wash technique:
yellow 1 (MU 22996) and yellow 2 (MU 22997)
l Bistro: apricot
Marmorino: Arancione 1 (MF 00031), and /or color-wash technique:
apricot 1 (MU 22993) and apricot 2 (MU 22994)
l
Main areas of color: signal white, RAL 9003, or light gray,
RAL-Design System 000 85 00
fine-grained, organically bonded artificial resin modeling plaster
(corresponding to Sto, StoDecolit MP natural)
Accented areas – walls and internal columns: marble-like wall coating,
gloss surface, for passenger car operations: (corresponding to Sto, Stolook
Marmorino), and /or color-wash technique – wall coating, matte surface,
for passenger car and commercial vehicle operations (corresponding to Sto,
StoColor Crylan, finishing and varnishing coat)
l
Toilets, kitchenette, ancillary rooms: white or light gray
Stoneware tiles glazed (corresponding to Villeroy & Boch, wall area 20/20
Series Unit One; wall frieze 10/10, Series Pro Achitectura)
l
Steel internal columns: white aluminum, RAL 9006
l
Concrete internal columns: signal white, RAL 9003, or light gray,
Product Description
l
Office areas, corridors: signal white, RAL 9003, or light gray,
fine-grained, organically bonded artificial resin modeling plaster
(corresponding to Sto, StoDecolit MP natural),
or textile wall covering (corresponding to Sto, StoTex Classic)
l
l
l
l
l
Wall coating internal, Fine-grained modeling plaster, Sto, see page 18
Wall coating internal, textile wall covering, Sto, see page 28
Wall coating internal, Marmorino, Sto, see page 29
Wall coating internal, color-wash technique, Sto, see page 27
Wall tiles, stoneware tiles glazed, Villeroy & Boch, see page 32
12
Doors in Internal Walls
Doors in Internal Walls
Product Description
The doors in internal wall areas stand out clearly against them. The frames are
of a darker hue, the door leaves can be inserted in wood or glass. Fire doors can
be of steel, wood, or glass (max. T30).
l
l
l
Micaceous iron ore, GEHOLIT + WIEMER, see page 16
Door furniture, HEWI, see page 80/81
Door furniture, FSB, see page 82/83
l
Office and ancillary areas:
door leaf: maple or beech or glass, door frame: micaceous iron ore anthracite,
DB 703 (corresponding to GEHOLIT + WIEMER)
l
Ancillary areas – internal areas:
door leaf: maple or beech or glass, door frame: micaceous iron ore anthracite,
l
Fire walls:
door leaf: sheet metal: light gray, RAL-Design System 000 85 00
door frame: micaceous iron ore anthracite,
l
Door furniture:
stainless steel or aluminum (corresponding to FSB, fitting with leveling bed,
Art. 1010, 1107 or 1108, aluminum color FSB 01 natural color or stainless steel,
color 6204, fine matte), or stainless steel (corresponding to HEWI, door handle
in R-Technique, Art. 160, 305.20/306.20) or nylon (corresponding to HEWI,
door handle in R-Technique, Art. 133R, color 92, anthracite gray)
13
Stairs
Stairs
Product Description
Stairs in the showroom are of filigree construction. As a rule, free-standing stairs
are constructed of steel with the possibility of forming an enlarged platform at
the foot of the stairs. Stairs in staircases are designed to be of solid construction.
l
l
l
l
Micaceous iron ore, GEHOLIT + WIEMER, see page 16
Floor tiles, see pages 32– 51
Laminate, Witex, see page 70
Multi-layered parquet,Object Parkett, see page 74
l
Steel construction:
micaceous iron ore anthracite, DB 703 (corresponding to GEHOLIT + WIEMER)
railings: micaceous iron ore anthracite, DB 703
hand-rail: stainless steel brushed
covering: tiles as in the showroom area or artificial stone matching
the showroom area or multi-layer parquet or laminate
l
Solid construction:
signal white, RAL 9003, or light gray, RAL-Design-System 000 85 00
railings: micaceous iron ore anthracite, DB 703
hand-rail: stainless steel brushed
covering: tiles as in the showroom area or artificial stone matching
showroom area
14
Flooring
or: ground color gray, squares black
the companies Anker, DESSO DLW Textil and Object Carpet offer this covering
as well as textile fabric, printed on loop pile or printed on velvet. Carpet tiles on
request
Flooring
Two different types of floor covering are used in the showroom. The differing
optical effect of the tiled area grid and the homogenous floor covering should be
taken into consideration here. For the commercial vehicle operations, the colors
medium and dark gray are recommended.
l
Showroom area, shop, customer service reception:
main areas of color: light gray, mid-gray, speckled; accented: dark gray.
jointing: minimum requirement plastic coated ready-made joint grout,
light gray to mid-gray
glazed stoneware: sizes 30/30, 40/40 (45/45), 60/60
accompanying socle tiles and stair tiles (corresponding to Villeroy & Boch,
Greyline or Marazzi, Enduro matte)
or unglazed porcelain: sizes 30/30, 40/40 (45/45), 60/60
accompanying socle tiles and stair tiles (corresponding to Villeroy & Boch,
Granifloor 2000 or Marazzi, Graniti Marlit or Impronta Italgraniti,
Le Pietre or RAK Ceramics)
or multicolored epoxy-resin floor covering: dark gray, light gray:
laid at the operator’s own risk (corresponding to Sto, StoQuartz C200)
l
Office spaces:
textile covering loop pile and velvet in three color combinations:
ground color blue, squares yellow
or: ground color gray, squares blue
l
Shop, bistro, waiting and working areas: maple or beech, multi-layered parquet,
strip or country-house flooring (corresponding to Object Parquet) or laminate
(corresponding to Witex)
l
Toilets, kitchenette, ancillary areas: light gray, mid-gray, speckled tiles
as in showroom area or additional size 20/20, R10 (taking into account regional
regulations with regard to slip resistance).
Product Description
Floor tiles, glazed stoneware and unglazed porcelain,
Villeroy & Boch, see page 33
l Floor tiles, unglazed porcelain, Impronta Italgraniti, see page 38
l Floor tiles, glazed stoneware and unglazed porcelain, Marazzi, see page 42
l Floor tiles, unglazed porcelain, R.A.K. Ceramics, see page 48
l Floor covering, multicolored made from epoxy resin, Sto, see page 52
l Textile covering, loop pile and velvet, Anker, see page 56
l Textile covering, velvet, DESSO DLW Textil, see page 60
l Textile covering, velvet and loop pile, Object Carpet, see page 66
l Laminate, Witex, see page 70
l Multi-layered parquet, Object Parkett, see page 74
l
15
Product Description
Micaceous Iron Ore
Micaceous Iron Ore DB 703, GEHOLIT + WIEMER
l
Product features: GEHOROL-KH micaceous iron ore is produced on the basis of
modified alkyd resin and anti-corrosion, high-quality micaceous iron ore with
aluminum and /or colored pigments
Color: product no. K7-, DB 703 (German railway colors 703)
l
Application: internal and external. GEHOROL-KH micaceous iron ore finishing
coats together with suitable anti-corrosion primers result in excellent weatherresistant coatings.
l
l
Treatment: treatment is by brush painting, compressed air and airless spraying.
As a rule, two finishing coats are applied to intact undercoats. Dry coat thicknesses of 40–50 µm are achieved per operation. GEHOROL-KH micaceous iron
ore is temperature stable up to +150° C; the stability of the complete system is,
however, dependent on the existing undercoating.
If the undercoats are zinc-dust based either an undercoat of GEHOROL-DK
metal-based bonding agent or a special formulation of GEHOROL-KH micaceous
iron ore must be used.
Undercoats: the choice and thickness layer of the necessary undercoats
depends amongst other things on the property, the surface preparation and the
treatment conditions. Impurities on the undercoat such as grease, oil,
dust-layers, etc. must be removed.
Undercoating /anti-corrosion layers:
GEHOROL-DK metal-based K1-675, K1-731, K1-883
GEHOLIT-CORROLESS K1-891, K1-892
Manufacturer
GEHOLIT + WIEMER GmbH, address see page 17
Technical features
l Danger category (VbF)
l Consignment class (GGVE, GGVS)
l Delivered form
l Yield
l
Shelf life
l
Standard packing drum
Suitable thinning agent
l
not applicable in delivered form
brushable
8m2/kg = 0.125 kg/m2, with a layer
thickness of 50 µm without taking treatment losses into consideration
in original packing drum at normal
temperatures at least 12 months
30 kg gross
for painting: thinning agent V-76
for spraying: thinning agent V-27
Treatment Comments
l Brush painting and roller application 0–2 % (additional thinning agent
(according to temperature)
additiveV-76)
l
Compressed air-spray
l
l
Airless spray
Material pressure 150–180 bar:
Treatment temperature:
l
Relative humidity:
l
Drying time:
jet: 1.5–2.0 mm (V-76)
pressure: 3–4 bar (V-76), 7–10 % (V-27)
jet: 0.38–0.43 mm (V-76)
3–6 % (V-27)
as an optimum from +15 –+25° C,
not below +5° C
not above 80 %; under dew point
conditions, not to be used!
non-stick: after 4–6 hours
application of further coat: after 12 hours
completely dry: after approx. 7 days
16
Product Description
White Aluminum and Cobalt Blue
White Aluminum, GEHOLIT + WIEMER
Technical features
Gloss grading
l Danger category (VbF)
l Consignment category
(GGVE, GGVS)
l Delivery form
l Yield
l
l
Product features: GEHOLIT-KH, based on modified alkyd resin and
non-fading pigments
Color: product no. K14-9006, white aluminum (RAL 9006)
Color: product no. K14-5013, cobalt blue (RAL 5013)
l
Application: internal and external. Silk sheen finishing coat for steel
constructions, to be applied after assembly.
l
Treatment: as a rule, treatment is done using a paint brush or roller with a
thickness layer of 40–50 µm. Airless or compressed air spay is also possible.
Preparation of the surface: The required undercoat must be intact, dry
and clean.
l
l
Protection against health hazards and damage to property: The relevant
regulations for treatment of lacquers and paints shall be complied with,
e. g., accident prevention regulations VBG 23 of the Mutual Indemnity
Association of Chemical Industries.
Undercoats /anti-corrosion undercoats:
GEHOROL-DK metal-based: K1-675, K1-731, K1-883;
GEHOLIT-DK: K1-RAL 9006, K1-RAL 5013
Manufacturer
GEHOLIT + WIEMER
Lack- and Kunststoff-Chemie GmbH
D-76676 Graben-Neudorf
phone: +49 (0) 7255 99-0
e-mail: [email protected]; www.geholit-wiemer.de
l
Appropriate thinning agent
Application Comments
l Brush painting and roller
application
l Compressed air-spray
l
Airless spray
Material pressure 200 bar
Treatment temperature:
l
Relative humidity:
l
Drying time:
l
silken sheen
brushable
8.1m2/kg = 0.125 kg/m2,
with a layer thickness of 50 µm,
without taking treatment losses into account
thinning agent V-76
0–1 %
(additional thinning agent V-76 additive)
jet: 1.5 mm (V-76)
pressure: 3–4 bar (V-76)
jet: 0.33–0.38 mm (V-76)
1–3% (V-76)
as an optimum from +15 – +25° C,
not below +5° C
not above 80 %,
under dew point conditions, not to be used!
dust free: approximately 1 hour
non-stick dried: 6–8 hours
application of further coat: after 12–16 hours
17
Product Description
Ceiling Coating
Ceiling Coatings
StoSilent Panel with
StoSilent Super Fine finishing coat
Sto Accoustic Spray Plaster
StoDecolit MP ceiling coating with micro-structure
You can find a comprehensive description of products on the Intranet:
architekturcenter.daimlerchrysler.com
To obtain a product description from Sto, see page 31
Sample ordering form, see page 19
18
Sample Ordering Form
Please tick requested samples
l
Stolit MP, white
q
l
StoSilent Panel
q
l
StoDecolit MP
q
l
StoTex 120, StoColor
Latex 4000
q
l
StoMiral Nivell
q
l
StoEuro Trend, medium
StoColor Rapid, white
q
Your delivery address
Construction Project:
Company:
Attn.:
Street:
Zip/Post Code:
Country:
Phone/Fax:
Please send your order by Fax to: +49 (0) 7744 57-2010
Town:
This product may only be applied by a specialist who has been authorized
or trained by the Sto AG!
q
Please ask for a corresponding reference list of specialists.
19
Product Description
Mineral Fiber Tiles
Mineral Fiber Tiles
Prima DunePlus micro look
l
l
l
l
l
l
l
l
l
l
l
l
l
Composition: Inorganic cast fiber, (bio-soluble) with mineral filler, Perlite,
powdered clay, cellulose, starch, coated with emulsion paint
Surface: DunePlus, perforated
Dimensions: 600 x 600/1200 x 15 mm, 625 x 625/1250 x 15 mm,
further dimensions on request
Light reflectance: 83 % (WT)
Color: similar to RAL 9010, white
Sound absorption: NRC 0.5
Fire protection: Building material category B1, hardly inflammable and A2,
non-combustible
Weight: 3.5 kg/m2
Humidity resistance: 95% RH (building material category A2: 70 % RH)
Delivery: 1 week after order received
Workmanship, installation: The underlying construction consists of main and
transverse rails which form a grid measuring from 600 x 600 mm to
625 x 625 mm. The main rails are spaced at between 1200 mm and 1250 mm
centers and suspended by approved hangers spaced at a maximum of 1200 mm.
Construction in accordance with DIN 18168, part 1
System accessories: Armstrong 15 mm T-rail system Prelude 15 XL or TL, stepwallangle 1508HB
Further details of the specification text and sample ordering can be requested
on page 23. You can obtain technical support for your country from the contact
person responsible, who can be found in the list on page 25.
20
Product Description
Mineral Fiber Tiles
Mineral Fiber Tiles
Ultima micro look
l
l
l
l
l
l
l
l
l
l
l
l
l
Composition: Inorganic cast fiber, (bio-soluble) with mineral filler, Perlite,
powdered clay, cellulose, starch, coated with emulsion paint
Surface: Ultima
Dimensions: 600 x 600/1200 x 19 mm, 625 x 625/1250 x 19 mm,
Light reflectance: 90 % (WT)
Color: similar to RAL 9010, white
Sound absorption: NRC 0.7
Fire protection: Building material category B1, hardly inflammable
Weight: 5.7 kg/m2
Humidity resistance: 95 % RH
Delivery: 1 week after order received
Workmanship, installation: The underlying construction consists of main and
transverse rails which form a grid measuring from 600 x 600 mm to
625 x 625 mm. The main rails are spaced at between 1200 mm and 1250 mm
centers and suspended by approved hangers spaced at a maximum of 1200 mm.
Construction in accordance with DIN 18168, part 1
System accessories: Armstrong 15 mm T-rail system Prelude 15 XL or TL, stepwallangle 1508 HB
21
Product Description
Metal Coffered Ceiling
Metal Coffered Ceiling
Orcal Clipin, micro perforated or extra micro perforated
l
l
l
l
l
l
l
l
l
l
l
Material: Ceiling tiles made from electro-galvanized, polyester powder-coated
steel plate. Perforated metal ceiling, micro perforated or extra micro perforated,
3mm bevel, in each case with acoustic fleece
Dimensions: 600 x 600/1200 mm, 625 x 625/1250 mm;
Light reflectance: 65 %, extra micro perforated approximately 85 %
Standard color: RAL 9010, white, gloss grading approximately 20 %,
Global white, gloss grading approximately 12 %
Sound absorption a Sab: NRC approximately 0.90 with acoustic pad, approximately NRC 0.70 with acoustic fleece, extra micro perforated: approximately
NRC 0.65 with acoustic fleece
Longitudinal sound insulation: 26 dB with acoustic pad (thickness 25 mm,
density 45 kg/m2)
Fire protection: Building material category A (non-combustible) DIN 4102 part 4
Delivery: 4 weeks after receipt of order
Construction: The covered underlying construction consists of a double grid
with clamping profiles
System accessories: Armstrong underlying construction system Orcal 3000,
F-step-wallangle
22
Please tick requested samples/documentation
q
Hand sample
q
Catalogue
q
q
Full tile
q
Specification CD
Data sheet
For the following products:
q
DunePlus micro look
q
q
Orcal Clipin micro perforated
q
Company:
Attn.:
Street:
Zip/Post code:
Country:
Phone/Fax:
Town:
Ultima micro look
Orcal Clipin extra micro
perforated
Please send your order by Fax to:
Esther van den Broek, +49 (0) 251 7603-593
23
Company Profile
Armstrong Building Products GmbH
In 1860, Thomas Morton Armstrong opened a tiny two-man cork cutting shop
in Pittsburgh, Pennsylvania, making his first deliveries of hand-carved corks by
wheelbarrow.
In the 60s, Armstrong built its first plant in Europe. Today, it is market-leader
worldwide for acoustic ceiling systems and, as a result of recent acquisitions and
joint ventures, represented in all areas of the market for suspended ceilings in
Europe. Armstrong’s European plant structure ensures that Armstrong alone is in
full control of the production of all Armstrong products. This means continuous
production cycles which guarantee consistent and effective deliveries to our
customers.
For many companies growing internationally, Europe is a major cornerstone of
their corporate strategy. In order to meet the requirements of these customers,
Armstrong has founded the European Corporate Alliance. This group of Armstrong personnel offers these customers cross-border support in dealing with
problems of an international nature.
Please choose your Armstrong specialist on page 25. She/He will see to it that
your requirements with regard to Armstrong’s suspended ceiling systems are
met quickly and reliably.
Armstrong Building Products GmbH
Robert-Bosch-Straße 10
D-48153 Münster
Phone: +49 (0) 251 7603-210 / Fax: +49 (0) 251 7603-593
ceilings-eu.armstrong.com
24
Contacts
Austria
Ralf Thyzel
+ 49 7071 973875
[email protected]
Poland CEE
Anna Baczkowska
+ 48 605 368-448
Belgium
Bruno Longo
+ 32 65 79 53 80
[email protected]
Portugal
Raul Horro
+ 93 814 2316
[email protected]
[email protected]
Brunei
Aries Sjahindow
+ 63 2 887-6611
[email protected]
Romania
George Radu Toma
+ 40 1 348-5316
[email protected]
[email protected]
Bulgarie
Milen Petrov
+ 359 2 7600-49
[email protected]
Russia
Sergeij Yakunin
+ 7095 792-3424
Canada
Brian Toner
+ 1 514 343 3038
[email protected]
Scandinavia
Lennart Bjorkholm
+ 46 500-424286
[email protected]
China
Allen Ho
+ 8621 6393-3077
[email protected]
Singapore
Eddy Lee
+ 65 358-1081
[email protected]
Czechia
Martina Trestova
+ 420 2 83850641
[email protected]
Slovenia
Jure Zdesar
+ 386 1 3634064
[email protected]
France
Vincent Duverger
+ 33 1 43 904526
[email protected]
Spain
Raul Horro
+ 93 814 2316
[email protected]
Germany
Ralf Thyzel
+ 49 7071 973875
[email protected]
Switzerland
Ralf Thyzel
+ 49 7071 9738-75
[email protected]
Greece
Alessandro Buldrini + 39 06 5220-5246
[email protected]
Taiwan
Rick Yin
+ 8862 2786-7258
[email protected]
Hong-Kong
Derek Tse
[email protected]
Thailand
Ch. Aungsasuwan
+ 662 817-1873
[email protected]
+ 852 2585-7800
Hungary
Tamas Viczan
+ 36 1200-6498
[email protected]
Turkey
Cengizhan Balci
+ 90 212 292-2016
cengizhan_ [email protected]
Indonesia
Aries Sjahindow
+ 63 2 887-6611
[email protected]
Ukraine
Leonid Albert
+ 380 44 296-4580
[email protected]
Ireland
Dennis Jones
+ 44 1895 202-134
[email protected]
United Kingdom
Dennis Jones
+ 44 1895 202-134
[email protected]
Italy
Stefano Benini
+ 39 0532 742348
[email protected]
USA Midwest
Barry Burnett
+ 1 610 659-4367
[email protected]
[email protected]
Japan
Rick Yin
+ 8862 2786-7258
[email protected]
USA North Central
Barry Burnett
+ 1 610 659-4367
Korea
Rick Yin
+ 8862 2786-7258
[email protected]
USA Northeast
Robert Williams
+ 1 717 397-7879
[email protected]
Latin America
Armando Bulacia
+ 1 305 778-5242
[email protected]
USA South Central
Ron Fry
+ 1 817 307-5979
[email protected]
Luxembourg
Bruno Longo
+ 32 65 795380
[email protected]
USA Southeast
Jeffery Dopheide
+ 1 770 329-5973
[email protected]
Malaysia
Aries Sjahindow
+ 63 2 887-6611
[email protected]
USA West
Donald F. Lopez
+ 1 714 273-0932
[email protected]
Netherlands
Koen Dewilde
+ 31 76523-0205
[email protected]
Vietnam
Aries Sjahindow
+ 63 2 887-6611
[email protected]
Philippines
Aries Sjahindow
+ 63 2 887 6611
[email protected]
25
Product Description
Exterior Wall Coatings
Exterior Wall Coatings
Stolit MP natural
Exterior wall coating
Alternatively:
StoMiral Nivell smooth stippled with even structure
or StoNivelit
StoColor Crylan, color blue
Color wash technique for exterior/interior application
StoColor Crylan, color yellow
Color wash technique for interior application
StoColor Crylan, color apricot
Color wash technique for interior application
Comprehensive details of the products ae available on the Intranet:
architekturcenter.daimlerchrysler.com and from Sto (addresses see page 31).
For sample ordering form, see pages 19 and 30.
26
Product Description
Wall Covering Exterior/Interior
StoColor Crylan
Application/Technical Leaflet
Rev. No. StoColor Crylan /DE/DE/001 valid from: July 2000
Universal acrylate façade paint
High color stability, water vapor permeable, excellent adhesive properties, high
degree of weather proofing.
Blue 1, MU 22949 + Blue 2, MU 22950 (exterior/interior)
These surfaces can only be produced individually! Differences in application conditions in the surface texture cannot be excluded!
Apricot 1, MU 22993 + Apricot 2, MU 22994 (interior)
Yellow 1, MU 22996 + Yellow 2, MU 22997 (interior)
27
Product Description
Interior Wall Coatings
StoDecolit MP natural
Fine-grained modeling plaster
StoTex Fabric, classic 120
StoColor Latex 4000, white
Textile wall covering with abrasion resistant silk matte finishing coat
StoLook Marmorino, color MF 00021, Giallo Oro 1
High-quality interior wall coating
StoLook Marmorino, color MF 00031, Arancione 1
StoLook Marmorino, color MF 00061, Blu 1
Sto Lacquer Program
Accented colors
RAL 9006 / 9007 / 5013 / 7036
You can find comprehensive details of the products on the Intranet:
architekturcenter.daimlerchrysler.com
To request product description from Sto, see page 31
For sample ordering form, see pages 19 and 30
28
Product Description
StoLook Marmorino
Application /technical leaflet
Rev.-No. StoLook Marmorino/DE /DE /001 valid from July 2000
Mineral polished plaster to achieve highly decorative surfaces
MF 00061 blu 1
MF 00031 arancione 1
These surfaces can only be produced individually! Differences in application
conditions in the surface texture cannot be excluded!
MF 00021 giallo oro 1
29
Please tick the samples required
l
StoLook, Marmorino
blue 1, MU 22949+
blue 2, MU 22950
q
q
apricot 1, MU 22993+
apricot 2, MU 22994
q
q
yellow 1, MU 22996+
yellow 2, MU 22997
q
MF 00061 blu 1
q
MF 00031 arancione 1
MF 00021 giallo oro 1
l
StoColor Crylan,
wash technique
Company:
Attn.:
Street:
Zip/Post code:
Country:
Phone/Fax:
Please send your order by fax to: +49 (0) 7744 57-2010
Town:
These surfaces can only be produced individually! Differences in application
conditions in the surface texture cannot be excluded!
30
Company Profile
Sto AG Germany
Maintaining the value of old and new buildings is a permanent problem for developers, investors and users.
In order to solve this problem, Sto researches, develops, produces and markets
product systems and services which maintain and improve the substance and
function of walls, ceilings and floorings and in the long term protect them from
damage. Hand in hand with this practical purpose is the aesthetic design service
for buildings using color and structure. With this, Sto aims to be a pacemaker
for environmentally conscious structuring of living space for people. That is
why Sto cultivates cooperation with customers and partners who have the same
goals. This guiding principle can be summed up in three words:
building with conscience
and Sto wishes this expression to be understood as the standard required of itself
and as a call to all those involved in construction to do likewise.
Headquarters and Administration
Ehrenbachstr. 1
D-79780 Stühlingen
Phone: +49 (0) 7744 57-0
Fax: +49 (0) 7744 57-2178
www.sto.de
e-mail: [email protected]
Germany
Sto AG
Ehrenbachstr. 1
Infohotline
D-79780 Stühlingen
Phone: +49 (0) 7744 57-1010
Fax: +49 (0) 7744 57-2010
International
Sto AG
Ehrenbachstr. 1
c/o Tatiana Amann
D-79780 Stühlingen
Phone: +49 (0) 7744 57-1374
Fax: +49 (0) 7744 57-2374
31
Product Description
Wall Tiles
Glazed Stoneware Tiles
l
Areas of Application:
Wall areas customer toilets, ancillary rooms
Series Unit One
Size: 20/20 (197 x 197 x 6 mm), Art. 3171
Colors: UT01 white, UT02 light gray, silk matte
Wall design customer toilets:
Series Pro Architectura
Size: 10/10 (97 x 97 x 6 mm), Art. 3201
Color: PA13 light gray, PA14 mid-gray, PA15 dark gray, gray colors silk matt
l
Technical features:
Fine ceramic stoneware glazed, DIN EN 176 with glazed tile edge
l
Tile Laying Information:
Laid in a thin mortar bed in accordance with DIN 18157, joint width 2–3 mm
e. g., plastic coated ready-made grout, color light gray
l
Cleaning and Maintenance:
Glazed stoneware tiles are very easy to maintain. Cleaning is done with normal
household cleaning materials which may not contain any protective emulsions.
32
Product Description
Floor Tiles
Glazed Vitreous Tiles, Villeroy & Boch
l
Areas of application:
Floor areas showroom, customer areas
Greyline Range
Formats:
30/30 (296 x 296 x 8.5 mm)
Art. 3216
40/40 (396 x 396 x 9 mm)
Art. 3137
7.5/30 skirting
Art. 3142
30/30 stair tread
Art. 3217
Colors:
DC03 light gray V, DCO2 medium gray V, DC01 dark gray IV
l
Technical properties:
Fine ceramic glazed vitreous, DIN EN 176, slip resistance R9, wear-resistance
group IV/V. Test certificate available on request.
l
Tiling information:
Design - main areas light gray, sections or strips medium and dark gray. Laid in
a thin mortar bed in accordance with DIN 18157, combined or floating bed
method, joint width 3–4 mm, e. g. plastic-modified ready-mixed grout, gray.
l
Cleaning and maintenance:
Glazed vitreous tiles are very easy to maintain. Normal household cleaning without protective emulsions; grease-dissolving, neutral to slightly alkaline detergent.
For large areas, a vacuum cleaner with counter-rotating brushes and dirty water
suction is recommended.
33
Product Description
Floor Tiles
Porcelain Stoneware Tiles
l
Floor areas showroom, customer areas
Granifloor 2000 Range
Formats
30/30 (296 x 296 x 8.5 mm)
Art. 2214
45/45 (446 x 446 x 8.5 mm)
Art. 2019*
60/60 (596 x 596 x 9 mm)
Art. 2014
7.5/30 skirting
Art. 2232
30/30 stair tread
Art. 2234
Colors:
913H light gray, 913M mid-gray*, 913D dark gray
l
Due to the low degree of water absorption and additional ceramically sealed surface, porcelain stoneware tiles are insensitive to
stains and dirt. Standard commercial porcelain stoneware cleaning agents are available. Do not use cleaning agents containing
protective emulsions. For large areas, a vacuum cleaner with
counter-rotating brushes
and dirty water suction is recommended.
*Article, color for the time being produced only on request.
All articles available on request with polished surface (Vilboguard) having
slip resistance R9.
l
Technical properties:
Porcelain stoneware, DIN EN 176, WA 0.04%, ceramically sealed surface,
slip resistance R9. Test certificate available on request.
l
Tiling Information:
Design – main areas light gray, sections or strips medium and dark gray. Laid in
a thin mortar bed in accordance with DIN 18157, combined or floating bed
method, joint width 3–4 mm, e. g. plastic-modified ready-mixed grout, gray.
34
Series
Unit One
Size
20/20
Art.No.
3171
Pro Architectura
10/10
3201
Greyline
R9
30/30
3216
40/40
3137
Granifloor 2000
R9
30/30
2214
Granifloor 2000
30/30
R9, polished Vilboguard
2243
Colors
q UT01 white
q UT 02 light gray
q PA13 light gray
q PA14 medium
q PA15 dark gray
q DC03 light gray
q DC02 medium
q DC01 dark gray
q DC03 light gray
q DC02 medium
q DC01 dark gray
q 913 H light gray
q 913 M medium
q 913D dark gray
q 13 HV
q 13 MV
q 13 DV
Company:
Adressee:
Street:
Zip/Post code:
Country:
Phone/Telefax:
Construction project:
Town:
35
Company Profile
Villeroy & Boch AG
Founded in the year 1748, Villeroy & Boch is one of the oldest industrial undertakings renowned throughout the world. The products of the four divisions, tiles,
bathroom and kitchen, wellness and tableware, are distributed internationally
in accordance with the marketing strategy “The House of Villeroy & Boch.”
Creativity and innovative energy characterize both the company and the brand.
Germany
Villeroy & Boch AG
c/o Mr. Andreas Thal
Rotensteinerweg
D-66663 Merzig
Phone: +49 (0) 6864 81-3464
Fax:
+49 (0) 6864 81-1329
Europe/Overseas
Villeroy & Boch AG
Head of export sales, tiles
Europe/Overseas
c/o Mr. Thorsten Bies
Rotensteinerweg
D-66663 Merzig
Phone: +49 (0) 6864 81-2455
Fax:
+49 (0) 6864 81-2366
www.villeroy-boch.com
Europe /Overseas
Villeroy & Boch AG
Head of export sales, tiles
Europe/Overseas
c/o Ms. Carine Botzung
Rotensteinerweg
D-66663 Merzig
Phone: +49 (0) 6864 81-1436
Fax:
+49 (0) 6864 81-2366
36
Contacts
A - Austria
B - Belgium
BiH Bosnia-Herzegovina
CH - Switzerland
CZ - Czech Republic
DK – Denmark
E – Spain
E - Canary Islands
FIN - Suomi Finland
EST – Estonia
GB - Great Britain
& Ireland
GR – Greece
H – Hungary
HR – Croatia
I – Italy
L – Luxembourg
N – Norway
IS – Iceland
NL – Netherlands
PL – Poland
RO – Romania
RUS – Russia
S – Sweden
SK - Slovakia
SLO – Slovenia
UA – Ukraina
USA
D - Export Management
Export Overseas
l Middle East, Far East
l Africa, Central/South America
WBE Vertriebsges. mbH
AVIBO sprl
Jadranko KRIZANAC
MBD Marketing GmbH
Vladimir Polásek
E. René Pedersen
Villeroy & Boch Hogar SL
Ingo F. Pangels
Wegscheider Straße 72
Schoolstraat 79
Dubravica 100
Postfach
Biskupcova 36
Fabriksvej 36
Calle Valencia 231 ATI
Calle Costa y Grijalba 18
4020 Linz
1980 Zemst
72250 Vitez
4153 Reinach 1
13000 Praha 3
6000 Kolding
08007 Barcelona
38004 Santa Cruz de Tenerife
Phone: +43 732 37170-10
Phone: +32 475 26 67 28 (f) / 26 32 66 (nl)
Phone: +387 30 71 32 59
Phone: +41 61 7131 393 / mobile: 079-2157942
Phone: +42 2 6514770 / mobile: 0602-362195
Phone: +45 75 533444 / mobile: 040-503444
Phone: +34 934 96 12 00 / mobile: 609 00 84 04
Phone: +34 922 27 26 85 / mobile: 639 78 75 00
Jorma Järveläinen
FFP Marketing Ltd.
00740 Helsinki
Swindon, Wiltshire SN6 6QR
Phone: +358 09 8795453 / mobile: 050-500 49 07 Fax: +358 09 879 55 05
Phone: +44 1793 526274 / mobile: 07768145351 Fax: +44 01793 539813
Panag. St. Koliopoulos
Villeroy & Boch Magyarország Rt.
Irena JESENSEK
Villeroy & Boch
Villeroy & Boch S.á.r.l.
E.C. DAL A/S
RAMIS ltd.
Martin RITSMA B.V.
Villeroy & Boch Polska Sp.z.o.o.
Mondial SA Str.
Igor STECKZER c/o V.B.R.
Jan FLINK AB
Stanislav MENSIK
Irena JESENSEK
Alexej KHELEMENDIK
Villeroy & Boch (USA) Inc.
Villeroy & Boch AG, Export Fliesen
Kauriintie 5H214
Raglans, North End
Ashton Keynes
55, Filonos Str. 4th Floor
Erzsébeti út 7.
Rozna dol. C. XIII/3
Via Privata C. Vaccari, 47
330, rue de Rollingergrund
Roa, Vaekeroveien 234
Silungakvisl 25
Bovenweg 2
ul. Migdalowa 4
Timisorii 149 – 151
ul. Namyotkina 3
Victor Hasselblads gata 9
Pod Sípkom 1155/10
Rozna dol.c. XIII/3
Vandy Vasikewskoy Str. 15/1 w 25
5 Vaughn Drive, Suite 307
P.O. Box 10 01 10
185 35 Piréas
6800 Hódmezovásárhely
1111 Ljubljana
19035 Ponza Magra (SP)
1018 Luxembourg
0701 Oslo 7
110 Reykjavik
8071 St Nunspeet
02 - 796 Warszawa
1800 Lugoj
117393 Moskva
421 31 Västra Frölunda
95803 Partizánski
1111 Ljubljana
255000 Kijev
Princeton, N.J. 08540
66651 Merzig
Phone: +30 1 411 4807
Phone: +36 6 62 530 530
Phone: +386 61 2566584 / mobile: 41-755056
Phone: +39 0187 637211
Phone: +353 46821 259 / mobile: 021-170315
Phone: +47 67166060 / mobile: 09 - 2883730
Phone: +354 354 896 0623
Phone: +31 341 251662 / mobile: 06-53148501
Phone: +48 22 645 17 22
Phone: +40 56 350777
Phone: +7 95 7197821/51 / mobile: 095-7433305
Phone: +46 31 495300 / mobile: 070-8492434
Phone: +42 815 7400369 / mobile: 0903-730264
Phone: +386 61 2566584 / mobile: 41-755056
Phone: +7 44 4442788 / mobile: 044-2518588
Phone: +1 609 4194110
Phone: +49 6864 811436
Fax: +30 1 412 7391
Fax: +36 6 62 530-573/-588
Fax: +386 61 2566584
Fax: +39 0187 631014
Fax: +353 229720
Fax: +47 67 16 60 67
Fax: +354 567 1601
Fax: +31 341 262903
Fax: +48 22 645 17 21
Fax: +40 56 356289
Fax: +7 95 4240666
Fax: +46 31 492430
Fax: +42 815 7400369
Fax: +386 61 256 65 84
Fax: +7 44 4442788
Fax: +1 609 4194148
Fax: +49 6864 812366
Villeroy & Boch Ceramica LIGURE
Villeroy & Boch AG
Via Privata C. Vaccari, 47
P.O. Box 10 01 10
19035 Ponzano Magra (SP)
66651 Merzig
Phone: +39 187-6371
Phone: +49 6864 811436
Fax: +39 187-631014
Fax: +49 6864 812366
Fax: +43 732 3717 00-20
Fax: +32 15 623200
Fax: +387 30 71 32 59
Fax: +41 61 7131 390
Fax: +42 2 6514770
Fax: +45 75 533422
Fax: +34 934 96 12 02
Fax: +34 9 22 15 15 55
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
37
Product Description
Floor Tiles
ITALGRANITI Porcelain
is an unglazed ceramic material dyed throughout consisting of natural clays,
quartz and feldspar. This material has a fully sintered and non-porous surface
and is produced at the cutting edge of modern technology.
Showroom, customer area–floor areas
Colors:
P30
P31
P32
Azurite
Dolomia
Labradorite
light gray
mid-gray
dark gray
Sizes: 30x30, 40x40, 60x60 with matching socles and stairs
Finish: natural (R9) and polished (R9 on request) (DIN 51130)
All colors are produced to order. Delivery time: 3 weeks.
Technical Features (DIN EN 176-B1-UGL)
l high level of surface hardness: Mohs 8–9 (Diamond 10)
l extreme resistance to breaking strains – 566 kg/cm2 (EN 100)
l low water absorption <0.04% (EN99)
l high dimensional and color stability – allows laying with narrow joints
l high resistance to deep abrasion – 115 mm3 (EN 102)
l the permanent resistance to staining which the tiles acquire during firing
also makes them resistant to oils, grease and tire marks (ISO 10545.14)
Laying Information (DIN 18157):
Thin mortar bed laying with modified plastic adhesive.
Joint width and grout color: 3–4 mm /from gray to dark gray
Thanks to the permanent resistance to staining acquired during firing and the
resulting low level of water absorption, ITALGRANITI materials are easy to clean
with just hot water, even when soiled by substances such as engine oil, hydraulic
fluid, tire marks, brake fluid, etc., as certified by the Prüflabor Keramik & Stein,
Dr. Michael Schwerin laboratory in Munich.
Our Advice: Clean with detergents which do not leave residues (e. g. porcelain
detergent), using small amounts. Maintenance: no special maintenance procedures are needed.
38
Sample Ordering Fom
Please tick the tiles required
Azurite
q P3030
q P3040
q P3066
30x30
40x40
60x60
natural
natural
natural
q
q
q
P3031 30x30 polished
Dolomia
q P3130
q P3140
q P3166
30x30
40x40
60x60
natural
natural
natural
q
q
q
Labradorite
q P3230
q P3240
q P3266
30x30
40x40
60x60
natural
natural
natural
q
q
q
Azurite
P3030
P3040
P3066
Dolomia
P3130
P3140
P3166
Labradorite
P3230
P3240
P3266
Company:
Attn.:
Street:
Zip/Post code:
Country:
Phone/Fax:
e-mail:
Town:
Please send your order by Fax to: +39 059 848-808
39
Company Profile
ITALGRANITI was founded in October 1994.
In the few years from its foundation to the present day, Italgraniti S.p.A. has
enjoyed impressive expansion, assuming an important role in the ceramics sector.
The success Italgraniti has achieved so far in terms of turnover is owed to the
synergy of different factors: a well-judged company strategy, the introduction
of innovative production technologies, high quality of products in demand and
effective management of human potential, intelligently motivated to the achievement of the corporate aims.
ITALGRANITI floor and wall tiles
Italgraniti S.p.A. porcelain is an unglazed ceramic material dyed throughout
with a high technology content: optimal blend of choice quality raw materials,
production techniques at the cutting edge and continuous research, enabling
Italgraniti to faithfully reproduce the high quality aesthetic appearance of natural
stone like marble and granite.
Customer service
Italgraniti places qualified project consultants at your service, for advice in
person on both technical and design questions.
Impronta Italgraniti Industrie Ceramiche S.p.A.
Viale Virgilio, 48
41010 Modena – Italy
Phone: +39 059 888-411, Fax: +39 059 848-808
www.improntaitalgraniti.com
www.italgraniti.it
40
Contacts
America a.Caribbeans Alessandro Levi
+ 1 703 455 9200
[email protected]
Hong Kong - China
Asia
Cesare Cioni
+ 39 059 888 411
[email protected]
Hungary
Eastern Europe
Paolo Costi Tonarelli
+ 39 059 888 411
[email protected]
Dennis Chow
+ 8 5223 8039 03
Aniko Burkololap kft + 36 23 415 801
+ 353 18 555 200
[email protected]
[email protected]
Ireland Republic
Tilestyle Limited
Israel
Super Ceramic 2000 + 972 393 946 66
[email protected]
[email protected]
[email protected]
Australia NSW
Earp Brothers
+ 6 12 4929 5000
[email protected]
Italy
Lorenzo Rimondi
Australia OLD
John Parrella
+ 6 173 265 7377
[email protected]
Jordan
Salah D. Shehadeh Trd. Co + 96 26 5534 910
[email protected]
South Australia
Donato Matteo
+ 6 188 3630 456
[email protected]
Kuwait
Hayat Group
[email protected]
Australia VT
James Edmond
+ 6 1394 298 888
[email protected]
Lithuania
Darius Skaisgiris
+ 370 2 301 062
[email protected]
Australia W.A.
Carmine Ciccarelli + 6 189 3303 611
[email protected]
New Zealand
Peter Roberts
+ 6 495 257 291
[email protected]
+ 39 059 888 411
+ 965 48 48 004
Austria
Günter Bernhard
+ 43 2262 672 140
[email protected]
The Nederland
Gerrit Van Het Oever + 31 534 782 056
[email protected]
Azerbaijan
Aaron Ismailov
+ 9421 93 08 61
[email protected]
Norway
Fliese Kompaniet
+ 47 2251 9400
[email protected]
Belgium/Luxembourg Rudi Schmitter
+ 32289308330
[email protected]
Poland
Softbud
+ 48 22 720 1707
[email protected]
Bulgaria
Totka Karavelova
+ 359 2 986 18 23
[email protected]
Portugal
Toussier
+ 351 212 123 600
[email protected]
Czech Republic
W.A.W. S.R.O.
+ 420 19 759 4000
[email protected]
Rumania
Sorin Vasile
+ 4 01 330 96 87
Slovacchia Republic
W.A.W. S.R.O.
+ 420 19 759 4000
[email protected]
Russia
Karamycheva Elena + 95 917 7784
[email protected]
[email protected]
[email protected]
Finland
Paolo Vandelli
+ 39 059 888 411
[email protected]
Sweden
Paolo Vandelli
+ 39 059 888 411
France
Pino Ongaro
+ 39 059 888 411
[email protected]
Switzerland
Erika Bontempelli
+ 39 059 888 411
[email protected]
Germany
Ferida Baumann
+ 49 7223 979 680
[email protected]
Singapore
Jerry Soh
+ 742 9300
[email protected]
GCC Countries
M. Al Abbas
+ 973 700 067
[email protected]
Spain
Emmanuel Cordelier + 39 059 888 411
[email protected]
Greece
Terzoglou Markos
+ 30 1 899 3642
[email protected]
Ukraine
Arina Mazurova
[email protected]
+ 380 482 348 325
41
Product Description
Floor Tiles
Glazed Stoneware Tiles Enduro
Produced by application of glazed coating on red-hot fragments
(Firestream procedure) Group B1 EN 176/BIGL)
Sizes:
300 x 300 x 10 mm
396 x 396 x 10 mm
592 x 592 x 11 mm
Technical features:
Breaking load in N
Modulus of rupture
Surface hardness
Slip resistance
Glaze thickness
Deep abrasion
Abrasion
Preformed: socle and stair tiles
> 2600 N (> 270 kg)
> 40 N/mm2
UNI EN 100
7 Mohs
UNI EN 101
R9
Enduro
R10
Enduro Grip
1.0 mm
< 150 mm3
(internal testing)
Group V
(highest rating)
12,000 revolutions
(artificial abrasion)
With Enduro, abrasion first occurs
at 100,000 revolutions
Guarantee
Twenty years special guarantee against abrasion and cleaning (see guarantee)
42
Product Description
Floor Tiles
Enduro – Production and Guarantee
Firestream
With this unique procedure, patented by Marazzi, the biscuit ist first heated to a
densification temperature of 1200° C. The gasses and micro-organisms contained
in the raw materials escape before a cascade of vitrifiable ceramics granules are
sprayed on the still red-hot fragments whereby glaze and biscuit fuse together to
an indissoluble unity.
What emerges is an even 1 mm thick extremely hard glaze of tiny crystals with
no micro-porosity, extreme compactness and good chemical stability.
Guarantee
Because of the special qualities of the series Enduro, Marazzi can guarantee for
a period of 20 years that under no circumstances will the glaze be completely
worn out by being walked on in the area of the property concerned and that the
tile can be cleaned perfectly with hot water and neutral detergent.
All these properties make Enduro an ideal glazed stoneware tile for areas in public and commercial buildings, in particular car showrooms.
43
Product Description
Floor Tiles
Porcelain Graniti, Series Marlit
Porcelain floor tile, dry pressed from a spray-dried compound consisting of clay
with kaolin, feldspar and quartz additives. Group B1 EN 176/BIUGL
Sizes:
300 x 300 x 8.5 mm
400 x 400 x 9.5 mm
600 x 600 x 10 mm
Preformed: socle
Technical Features:
Modulus of rupture
Breaking load in N
Surface hardness
Slip resistance
Deep abrasion
Water absorption
Protection against
staining
Special grey and special anthracite
Special geay
Special grey
> 45 N/mm2
UNI EN 100
> 2200 N (> 224 kg)
7–9 Mohs
UNI EN 101
R10
R11 (size: 97x197x15 mm)
120–150 mm3
UNI EN 202
0.03%
UNI EN 99
not applicable because of extremely low
water absorption
44
Please tick the tiles required
Graniti
300 / 300
400 / 400
600 / 600
Special Grey
q
q
q
Special Anthracite
q
Enduro
30 07 300
396 / 396
592 / 592
Platino new
q
q
q
Bario new
q
q
q
Rodio new
q
q
q
Rubidio new
q
q
q
Magnesio new
q
q
q
Company:
Attn.:
Street:
Zip/Post code:
Country:
Phone/Fax:
Town:
Please send your order by Fax to: +39 0536 860-300
45
Company Profile
History
The company was founded in Sassuolo in 1935 and was one of the first Italian
companies with an extremely innovative company policy which is directed
towards quality in management, technological innovation, research, constant
expansion and internationalization.
The technological successes of the Marazzi research are of a pioneering nature
for the whole ceramic industry. In the mid-70s, Marazzi developed and patented
the fusion penetration procedure and in 1985 the firestream procedure (Series
Enduro) of glazing on red-hot fragments.
Marazzi Today
The Marazzi Group is worldwide leader in the production of ceramics and operates its own factories in Italy, Spain, France and the United States.
Technological and aesthetic research, design, quality and customer service are
the fundamentals of Marazzi’s strategy.
Service
Marazzi Tecnica offers you support without obligation in technical and design
matters by qualified project consultants.
International:
Marazzi Gruppo Ceramiche S.P.A.
Viale Regina Pacis 39
41049 Sassuolo
Phone: +39 0536 860-352
Fax: +39 0536 860-300
www.marazzi.it; e-mail: [email protected]
Germany:
Marazzi Tecnica
Frau Hannelore Siegl
Phone/Fax: +49 (0) 711 63698-74
46
Contacts
Country
Name
Street
ALBANIA
Qazim Arifi
L. 8, Magarita Tutulani
AUSTRALIA
Paolo Salati
Unit12, 17 Eastcrescent-st.,2060 McMahons Point
AUSTRIA
Alfred Tammerl
Maisengasse 10
BALTIC STATES
Guido Park
Türi 9 Nr. 325
BULGARIA
Vlahov Vihren
46 Solunska Street
CANADA
G.E. SHNIER CO.
50 Kenview Blvd, Bramton
CENTRAL AND SOUTHAMERICA
Andrea Bondavalli
Viale Regina Pacis, 39
CHINA, EAST ASIA
Luca Boschini
CROATIA
Ivica Markovic
Periciceva 18
CZECH REPUBLIC
Radek Bednarik
Brdlikova 287 / 1 d
FRANCE
Giovanni Salsi
GERMANY
MARAZZI TECNICA
Fr. Liskow, Weiherstr. 3
l BAVARIA/S.THURINGIA/S.SAXONY Hermann Laackman
Sigenastr. 3
l S-H/HB/HH/MECK.-VP
Tobias Binder
Gladowstr. 14 b
l LOWER SAXONY/SAXONY-ANH. Thorsten Jaehn
Paul-Schneider-Str. 56
l BADEN-WUERTTEMBERG
Hannelore Siegl
Bismarckstr. 53/1
l BER/BRABU/SAX.-AN/North-THÜ Frank Göbel
Huberweg 48
l HESSE, RHINELAND-PALATINATE André Rustom
Frankfurter Str. 116 a
l N. RHINE WESTPHALIA, HESSE Susanne Patz
Braubauerschaft 24
l RHINELAND-PALATINATE, SAARL. Peter Harhoff
Burbacher Str. 30
GREECE
Issaakidis Konstadinos 5TH km Harilaou, Thermi, Pilaia
HUNGARY
Brandenburg Sandor
Brezno u. 11
ISRAEL
Uzi Merom
55a Ramim Street P.O.Box 515
ITALY
Alberto Debbia
JAPAN
Marazzi Japan Co. LTD. NS-Build.701, 2-2-3 Sarugakucho, Chiyuoda-Ku
MACEDONIA
Sa_o Ivanov Str.
“Ivo Ribar-Lola” No. 72/B-10
MEXICO
Porce Gres SA DE C.V. Insurgentes sur N.3735 Col. Hidalgo
NETHERLANDS
Vincenzo Pisani
POLAND
Roman Kuzniarz
Al. Jana Pawla II 25a POK 816
ROMANIA
Octavian Popa
Soseava Iancului 9 BL109 SCB AP 91Sector 2
RUSSIA
Alexander Serebriakov 27, Vyatskaya ul.
SAUDI-ARABIA, MIDDLE ORIENT
Talal Kaadan
SWITZERLAND
Luca Bellini
Via Deledda 24
SCANDINAVIA
Vincenzo Pisani
SLOVAKIA
Frantisek Bednarik
Brdlikova 287 / 1 d
SLOVENIA
Luca Bellini
Via Deledda 24
SPAIN
Marazzi Iberia S.A.
Ctra.Valencia-Barcelona km 63, Correo Apdo, 218
SOUTH AFRICA
Jesse Dosi
85, Bay Beach Avne. Sunset Beach
UKRAINA
Alexej Scherbina
AP. 98 building 12, Street Verbitskogo
USA
American Marazzi Tile Inc. 359 Clay Road, Sunnyvale
YUGOSLAVIA
Jovan Kankaras
Ljermontova 8/144
Post code / City
5/1 OP 13 Tirana
Sydney
9020 Klagenfurt
EE0013Tallin
1000 Sofia
Ontario L6T 5S8
41049 Sassuolo
41049 Sassuolo
21000 Split
150 00 Prague 5
41049 Sassuolo
53639 Königswinter
90461 Nuremberg
22041 Hamburg
32257 Bünde
70197 Stuttgart
13599 Berlin
63303 Dreieich
45889 Gelsenkirchen
50969 Cologne
55535 Salonika
1202 Budapest
Karmiel
41049 Sassuolo
Tokyo 101-0064
91.000 Skopje
14260 Mexico D.F.
41049 Sassuolo
37-450 Stalowa Wola
7000 Bucuresti
125015 Moskow
41049 Sassuolo
41049 Sassuolo
41049 Sassuolo
150 00 Prague 5
41049 Sassuolo
12080 Castellon
7441 Capetown
02068 Kiev
Dallas, Texas 75182
Belgrade
Phone
00355 42 44904
0061 2 89200394
0043 463 33547
00372 6 558025
00359 2-9865575
001 905-7893755
0039 0536-860377
0039 0536-860331
00385 21-543072
00420 2-57220463
0039 0536-860264
02223 700920
0911 498327
040 68915519
05223 491642
0711 6369874
030 35404005
06103 310169
0209 3616280
0221 369378
0030 310 489170
0036 1 2855051
00972 4 9988475
0039 0536 860247
008 3 52831355
00389 2 374632
00525 606 3272
0039 0536 860568
0048 15 8422269
0040 21 2502645
007 095 7877141
0039 0536 860470
0039 0536 911192
0039 0536 860568
00420 2 57220463
0039 0536 911192
0034 964 349000
0027 21 5520617
00380 44 564613
001 972 2260110
00381 11 4888555
Fax
00355 42 44904
0061 405 420477
0043 463 318069
00372 6 700106
00359 2 9865575
001 905 7893759
0039 0536 860555
0039 0536 860555
00385 21 543074
00420 2 57212005
0039 0536 860278
02223 700929
0911 4780348
040 68916072
05223 491643
0711 6369874
030 35404006
06103 807004
0209 3616281
0221 9362226
0030 310 489329
0036 1 2859787
00972 4 9581080
0039 0536 860399
0081 3 52831356
00389 2 377746
00525 606 4411
0039 0536 860300
0048 15 8422273
0040 21 2569279
007 095 7877141
0039 0536 860555
0335 6229994
0039 0536 860300
00420 2 57212005
0039 335 6229994
0034 964 349011
0027 21 5520617
00380 44 5646139
001 972 2265423
00381 11 3471470
Mobile
00355 69 2111830
E-Mail
0043 664 1049212
00372 5045346
00359 88 224634
[email protected]
[email protected]
[email protected]
0039 335 5970567
0039 335 7455338
00385 98 360535
00420 602 374364
0039 335 5995699
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
0049 171 5764819
0049 172 8906464
0049 173 2842103
0049 172 8915860
0049 172 3858805
0049 172 8915856
0049 172 8915857
0049 171 7401042
0030 9722 64610
0036 20 4111099
0039 335 467005
00389 70 206144
0039 335 8251776
0048 602 184480
0040 745 260302
007 095 1021724
0039 335 5771496
0039 335 8251776
00420 602 232910
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
0027 82 7829784
00380 67 9363354
[email protected]
00381 63 8393615
[email protected]
47
Product Description
Floor Tiles
Porcelain
Product: An unglazed porcelain dyed throughout
Area of Application: For customer area, showroom, floor areas depending on
characteristics and material thicknesses
Colors:
light gray
mid-gray
dark gray
blue gray
Size:
30 x 30 cm
40 x 40 cm
60 x 60 cm
Stairs 30 x 30 cm
Socle 8 cm high, length as required from 30 cm
Finishes:
matte R9
matte satin
polished
GP 54
GP 9
GP 5
GP 60
(R10 on request)
with baked protection against staining
for particularly easy cleaning
(R9 with laser treatment can be delivered
on request)
48
Product Description
Floor Tiles
Technical features:
l unglazed fine ceramic stoneware, DIN EN 176-B1-UGL
l high shock and abrasion resistance Mohs 8/9, abrasion 4/5
l low water absorption: < 0.05 %
l test certificate on request
Tile Laying Information:
l large number of design possibilities, main areas light gray, sections or strips
mid and dark gray
l
thin mortar bed laying in buttering-floating or fluidized bed procedure with
a joint width from 3–4 mm, e. g, plastic coated ready-made joint grout, color
gray to dark gray
l Because of the low water absorption and the protection against staining with
the satin finish, the porcelain tiles are very insensitive. For cleaning, detergents
which leave no residue should be used, e. g. normal, commercially available
porcelain detergents.
49
Please tick sample required
Size / Thickness
30x30 cm / 8.5 mm
q
40x40 cm / 10 mm
q
60x60 cm / 12 mm
q
socle strip
q
Stairs
q
light gray
GP 54
mid-gray
GP 9
dark gray
GP 5
blue gray
GP 60
q
q
q
q
q
q
q
q
q
q
q
q
q
q
q
Company:
Addressee:
Street:
Zip/Post code:
Country:
Phone/Fax:
Project:
Finishes
Matte
Satin
Polished
q
q
q
q
q
q
q
q
q
q
q
q
Town:
50
Company Profile
History
Founded in the year 1989, R.A.K. Ceramics has, in the short period since, developed into one of the largest manufacturers worldwide of ceramic, wall and floor
tiles, porcelain and sanitary ware. In the meantime, R.A.K. Ceramics exports to
more than 120 countries worldwide and with an investment volume of more than
350 million EURO, can be described as one of the market leaders.
In February 2000, R.A.K. Ceramics opened a porcelain factory that is unparalleled to this day. R.A.K. Ceramics is at the moment the only manufacturer in a
position to produce porcelain up to a maximum size of 120 x180 cm with a thickness of 20 mm.
Constant expansion, combined with a high degree of investment in innovation
and development, in products and in marketing is the model which R.A.K. Ceramics is based on, thus making it a reputable and successful partner for its customers.
Contact person Germany
R.A.K. Ceramics Deutschland GmbH
Großer Ring 15 a
D-25492 Heist
Phone: +49 (0) 4122 810-930
Fax:
+49 (0) 4122 810-950
Joachim Kiechle
Kastanienweg 6
D-73773 Aichwald
Phone: +49 (0) 711 36-2943
Fax:
+49 (0) 711 36-4253
International
R.A.K. Ceramics
c/o Dr. Kather Massaad
c/o Mr. Frederic Piras
P. O. Box 4714
UAE – Ras al Khaimah
Phone: +971 7 2445-046
Fax: +971 7 2445-270
www.rakceram.com
51
Product Description
Floor Covering
Floor Covering
StoQuarz Color C200
Color light gray 1
Multicolored epoxy resin-based floor covering
StoQuarz Color C200
Color dark gray 2
Multicolored epoxy resin-based floor covering
Comprehensive details of the products are available on the Intranet:
architekturcenter.daimlerchrysler.com and from Sto (addresses see page 31).
Sample ordering form, see page 54.
52
Product Description
Floor Covering
StoQuarz C 200
Application/Technical Leaflet
Rev. No. StoQuartz C 200/DE/DE/002, valid from: January 2001
Multicolored, pre-mixed quartz sand with application helper
and additional processing.
Maximum grain size 2.5 mm.
Light gray 1 (MU 30985)
Dark gray 1 (MU 23450)
53
Showroom
(smooth)
Workshop, C100
sanded (R11)
StoQuarz C 200
Light gray
MU 30985
q
q
StoQuarz C 200
Dark gray
MU 23450
q
q
Reference list of specialists
q
Company:
Attn:
Street:
Zip/Post Code:
Country:
Phone/Fax:
Town:
This product may only be laid by a specialist who has been authorized or trained
by StoCretec GmbH!
54
Company Profile
Sto AG Germany
Maintaining the value of old and new buildings is a permanent problem for developers, investors and users.
In order to solve this problem, Sto researches, develops, produces and markets product systems and services which maintain and improve the substance and function
of walls, ceilings and floorings and in the long term protect them from damage.
Hand in hand with this practical purpose is the aesthetic design service for buildings using color and structure. With this, Sto aims to be a pacemaker for environmentally conscious structuring of living space for people. That is why Sto
cultivates cooperation with customers and partners who have the same goals.
This guiding principle can be summed up in three words:
building with conscience
and Sto wishes this expression to be understood as the standard required of itself
and as a call to all those involved in construction to do likewise.
Headquarters and Administration
Ehrenbachstr. 1
D-79780 Stühlingen
Phone: +49 (0) 7744 57-0
Fax:
+49 (0) 7744 57-2178
www.sto.de
Germany
Sto AG
Ehrenbachstr. 1
Infohotline
D-79780 Stühlingen
Phone: +49 (0) 7744 57-1010
Fax: +49 (0) 7744 57-2010
International
Sto AG
Ehrenbachstr. 1
c/o Tatiana Amann
D-79780 Stühlingen
Phone: +49 (0) 7744 57-1374
Fax: +49 (0) 7744 57-2374
55
Product Description
Textile Floor Covering, Loop Pile
Perlon Brüssel
Design: 30037 - Color 30 (blue background with yellow squares)
Design: 30022 - Color 5 J (gray background with blue squares)
Clear graphic designs in various large matrices combine functional properties
with the highest aesthetic requirements. The design embodies the zeitgeist of
modern and lasting interior design, stimulating creative combinations.
l
Manufacturing Process
Surface
Width
Pile weight
Sound insulation
Wear criteria
Additional features
Burning classification
l
woven
loop pile, patterned
approx. 200 cm
approx. 900 g/m2
approx. 20 dB
extreme
castor chairs, stairs, antistatic,
under-floor heating
In accordance with DIN 4102 B1
Please contact us for our brochure “Cleaning and Maintenance”:
[email protected]
56
Product Description
Textile Floor Covering, Cut Pile
Office Melange 800
Design: D 3980 - Color 08 (blue background with yellow squares)
Design: D 1190 - Color 24 (gray background with blue squares)
Clear graphic designs in various large matrices combine functional properties
with the highest aesthetic requirements. The design embodies the zeitgeist of
modern and lasting interior design, stimulating creative combinations.
l
Manufacturing Process
Width
Surface
Pile weight
Sound insulation
Wear criteria
Additional features
Burning classification
l
tufted
approx. 195 cm
cut pile, chromojet-patterned
approx. 825 g/m2
approx. 27 dB
extreme
castor chairs, stairs, antistatic,
under-floor heating
In accordance with DIN 4102 B1
Please contact us for our brochure “Cleaning and Maintenance”:
[email protected]
57
Design 30037 - Color 30 (blue background with yellow squares), woven
q
Design 30022 - Color 51 (gray background with blue squares), woven
q
Design D 3980 - Color 08 (blue background with yellow squares), tufted
q
Design D 1190 - Color 24 (gray background with blue squares), tufted
q
Sample size: approx. 20 x 30 cm
Company:
Attn:
Street:
Zip/Post Code:
Country:
Phone/Fax:
e-mail:
Town:
ANKER Teppichboden
Gebr. Schoeller GmbH+Co. KG
Zollhausstraße 112
D-52353 Düren
Phone: +49 (0) 2421 804-212
Fax: +49 (0) 2421 804-309
www.anker-dueren.de
58
Company Profile
The ANKER family business was founded in 1854 and is now one of the leading
carpet manufacturers in Europe. The use of the latest production technology and
the focus on customers' individual requirements as to quality and design lie at
the core of the company's success. The same applies to the special ANKER solutions for particular market niches, thus for projects with the most demanding
requirements.
ANKER’s hard-wearing woven products have proven themselves internationally
for use in public buildings, banks, administration areas, and at airports and in
airplanes. Many of our brands are also available as tiles or large panels with
various backing materials.
The company operates:
l a yarn spinning mill
l a pile-wire weaving mill for dobby and jacquard
l a tufting mill
l a stock and hank dying facility
l a piece dying facility
l a chromojet printing line
ANKER Teppichboden,
Gebr. Schoeller GmbH+Co. KG
Zollhausstraße 112
D-52353 Düren
Phone: +49 (0) 2421 804-212
Fax: +49 (0) 2421 804-309
www.anker-dueren.de
59
Product Description
Textile Floor Covering, Velvet
Textile Floor Covering
High quality textile floor coverings from DESSO DLW enhance prestigious areas
in a building and accentuate the form language of contemporary architecture
through color and design.
In this space, the design unfolds to reveal a highly elegant area. Brilliance of
color and precise contours characterize the reproduction of individual designs on
the velvet. The Variotronic printing technique ensures constant product quality at
the highest level. The result is an extremely hard-wearing velvet floor covering
with a product in 400 cm wide trams which is insensitive to dirt. On request all
designs are also available as tiles (standard size 50/50 cm).
The Variotronic printing guarantees the precise reproduction of geometric
designs without warping. Furthermore, the product incorporates dirt-repellant
Teflon fibers and can be laid in such a way as to draw off electrostatic charges.
DESSO DLW products comply with the high-quality standard ETG which is checked and supervised by the Carpet Research Institute TFI Aachen in accordance
with the Norm EN 1307. All coverings are produced in a way which is protective
of the environment in accordance with the stringent guidelines of the German
Association of Environmently-friendly Carpeting (GUT) and checked for substances which are harmful to health or the environment. All coverings are certified to
conform with standard B1 (flame retardent).
DESSO DLW is certified in accordance with the quality management system DIN
EN ISO 9001.
11889-1
60
Product Description
Carpeting
Mercedes Benz VV 11893-29
Carpeting
Mercedes Benz VVM 12753-52
Carpeting
Mercedes Benz VVM 11889-29
Type of manufacture
Pile weight
Wearing rating
Comfort rating
Type of manufacture
Pile weight
Wearing rating
Comfort rating
Type of manufacture
Pile weight
Wearing rating
Comfort rating
1\10 tufted
650 g/m2
4 very heavy
LC 2 good
1\10 tufted
800 g/m2
4 very heavy
LC 2 good
1\10 tufted
800 g/m2
4 very heavy
LC 2 good
61
Product Features
q Mercedes Benz VVM 12753-52
q Mercedes Benz VVM 11889-29
Product description in accordance with DIN EN 1307 Category N
Attribute
Verification
Unit
Representatives characteristics:
Type of manufacture
ISO 2424
inch
1\10 tufted
Supply
ISO 3018
cm
400 trams
Surface structure
ISO 2424
velvet
Print
printed pattern, Vario design
Wear layer material
Directive 71/307/CEE
modified
%
100 PA, Acquafil
Core material
ISO 2424
synthetic fleece
Secondary backing
ISO 2424
Conductive secondary backing
Weight per unit area
ISO 8543
g/m2
2200
Total thickness
ISO 1765
mm
6.7
Pile weight
Manufacturers
details
g/m2
800
Pile layer weight
ISO 8543
g/m2
530
Pile layer thickness
ISO 1766
mm
4.1
Pile-raw density
ISO 8543
g/cm3
0.130
Loops per unit area
ISO 1763
per m2
180,000
Main requirements:
Color fastness to light
ISO 105-BO2
5-6
Color fastness to rubbing
ISO 105-X12
wet/dry 5 / 5
Color fastness to water
ISO 105/EO1
4-5
Classification:
Wearing rating
category 4 very heavy
Comfort rating
category LC 2 good
Auxiliary characteritics:
Electrostatic properties
EN 1815
kV
< 2.0
Resistance to earth
DIN 54345/6
Ohm
max. 1 x 10 to the power of 8
Surface resistance
DIN 54345/6
Ohm
max. 1 x 10 to the power of 8
Impact sound attenuation
improvement
ISO 140/8
dB
25
Thermal resistance
ISO 8302
m2k/W
0.11
Fire behavior
DIN 4102
category B1 PA-III 6.468
Carpeting
Carpeting
q Mercedes Benz VV 11893-29
Product description in accordance with DIN EN 1307 Category N
Attribute
Verification
Unit
Representative characteristics:
Type of manufacture
ISO 2424
inch
1\10 tufted
Supply
ISO 3018
cm
400 strips
Surface structure
ISO 2424
velvet
Print
printed pattern, Vario design
Wear layer material
Directive 71/307/CEE
modified
%
100 PA, Du Pont
Core material
ISO 2424
synthetic fleece
Secondary backing
ISO 2424
Conductive secondary backing
Weight per unit area
ISO 8543
g/m2
2000
Total thickness
ISO 1765
mm
6.5
Pile weight
Manufacturers det. g/m2
650
Pile layer weight
ISO 8543
g/m2
480
Pile layer thickness
ISO 1766
mm
4.3
Pile-raw density
ISO 8543
g/cm3
0.115
Loops per unit area
ISO 1763
per m2
260,000
Main requirements:
Color fastness to light
ISO 105-B02
>=5
Color fastness to rubbing
ISO 105-X12
wet/dry >=3 / >=3-4
Color fastness to water
ISO 105-E01
>=4
Classification:
Wearing rating
category 4 very heavy
Comfort rating
category LC 2 good
Auxiliary charcteristics:
Electrostatic properties
EN 1815
kV
< 2.0
Resistance to earth
DIN 54345/6
Ohm max. 1 x 10 to the power of 8
Surface resistance
DIN 54345/6
Ohm max. 1 x 10 to the power of 8
Impact sound attenuation
improvement
ISO 140/8
dB
25
Thermal resistance
ISO 8302
m2k/W
0.10
Fire behavior
DIN 4102
category B1 PA-III 6.468
62
q Original sample
40x60 cm
Mercedes-Benz
11893-29
q Original sample
40x60 cm
Mercedes-Benz
12753-52
q Original sample
40x60 cm
Mercedes-Benz
11889-29
Your Delivery Address
q Sample card (all three samples)
q CD-Rom Premier (tufted)
q CD-Rom Strong (needle fleece)
q Vitae (loop pile structure)
Please send your order by post or fax to: Desso DLW Textil GmbH,
Stuttgarter Straße 75, D-74321 Bietigheim-Bissingen, Fax: +49 (0) 7142 71-610
Company:
Attn:
Street:
Zip/Post Code:
Country:
Tel/Fax:
e-mail:
Town:
63
Cleaning and Maintenance
Proper maintenance cleaning is not only decisive for the cleanliness of wall to
wall carpeting, but also makes a significant contribution to enhancing the product value and its useful life. Cleaning is best done daily using a high-powered
suction cleaner with mechanically rotating brushes. It is best to go over the
whole floor twice (depending on the amount of dirt). This achieves the optimum
effect.
In addition to daily cleaning, every floor covering used in the building should be
cleaned thoroughly from time to time, depending on the degree to which it is
soiled. This will become necessary when the carpet is dirtied over a wide area. By
cleaning thoroughly, dirt will be removed in the most effective way, so reproducing the original qualities and optical appearance. How often this should be done
depends on the use of the correct method and the day-to-day cleaning. Thorough
cleaning should be undertaken by a specialized firm which has at its disposal the
appropriate state-of-the-art machines and accessories. DESSO DLW recommends
damp cellulose cleaning.
Included in the regular cleaning of tufted floor coverings in the building is the
removal of stains. The textile fibers are produced in such a way that stain treatment is successful in nearly all cases. If the material does become tarnished, the
fresher the stain is, the easier it is to remove.
No cleaning products may be used which contain bleach. An index of manufacturers and cleaning firms together with further recommendations can be obtained
from DESSO DLW.
12753-1
64
Company Profile
DESSO DLW is the textile division in the Armstrong DLW group, one of the largest floor covering manufacturers in the world.
In Europe, DESSO DLW is the only project supplier with a complete product spectrum of all types of textile floor coverings with worldwide sales and distribution
outlets, primarily through its own branches.
With us, the emphasis is on intensive service and advice with regard to all types
of coverings for projects.
We provide a technical service with detailed laying instructions and recommendations for cleaning and maintenance.
Germany
DESSO DLW Textil GmbH
Mr. Hans-Jürgen Wastl
Key Account Manager
Phone: +49 (0) 7021 9784-49
Fax:
+49 (0) 7021 9784-59
Mobile: +49 (0) 172 9093137
Europe /Overseas
Ms. Bettina Bond
Management Customer Service Center
Phone: +49 (0) 7142 71-147
Fax:
+49 (0) 7142 71-610
Mobile: +49 (0) 172 6493506
11893-1
You can also visit our homepage: www.desso-dlw.de
65
Product Description
Textile Floor Covering, Velour
Floor area, showroom, customer areas
Product Specification
LINIC-V 700
Color 790 - china blue Width: approx. 400 cm
Article, color is normally always available.
For large construction projects, delivery within a few weeks.
Technical Features
Application additional suitabilities:
Method of production:
Surface structure:
Pile material:
Primary backing:
Secondary backing:
Overall thickness:
Pile service weight:
Wearability:
Electrostatic loading:
Sound absorption:
Flammability:
Ecological classification:
DIN 66095, contracts, chair castors, stairs
DIN 61151, tufted
DIN 61151, velour
100% polyamide
DIN 61151, polyester fleece
DIN 61151, action bac, conductive layer
DIN 53 855, approx. 7.5 mm
DIN 54 325, approx. 710 g/m2
DIN 66 095, extreme
DIN 54 345 T2, < 2 KV
DIN 52 210, LW, +27 dB
DIN 4102 T14, B1
GuT, licensed
RWTÜV-exam-certificate, “suitable for persons
suffering from an allergy”
Material laying
Throughout with dispersion adhesive
Carpet laying
Varies in accordance with the sub-floor (normally on laying net with surrounding
edge rails)
Maintenance
Daily maintenance:
Thorough cleaning:
Stain removal:
vacuum cleaning with brush
shampooing with single or multi-disk cleaner
and spray extraction
water soluble stains with carpet detergent
66
Product Description
Textile Floor Covering, Loop Pile
Floor area, showroom, customer areas
Product Specification
LINIC-S 800
Color 819 - china blue
Width: approx. 400 cm
Article, color is normally always available.
For large construction projects, delivery within a few weeks.
Technical Features
Application –
additional suitabilities:
Method of production:
Surface structure:
Pile material:
Primary backing:
Secondary backing:
Overall thickness:
Pile service weight:
Wearability:
Electrostatic loading:
Sound absorption:
Flammability:
Ecological grading:
DIN 66095, contracts, chair castors, stairs
DIN 61151, tufted
DIN 61151, loop
100% polyamide
DIN 61151, polyester fleece
DIN 61151, action bac, concuctive layer
DIN 53 855, approx. 5.0 mm
DIN 54 325, approx. 680 g/m2
DIN 66 095, extreme
DIN 54 345 T2, < 2 KV
DIN 52 210, LW+27 dB
DIN 4102 T14, B1
GuT, licensed
RWTÜV-exam-certificate “suitable for persons
suffering from an allergy”
Material laying
Dispersion adhesive on full surface
Carpet laying
Varies in accordance with the sub-floor (normally on laying net with surrounding
edge rails)
Maintenance
Daily maintenance:
Thorough cleaning:
Stain removal:
vacuum cleaning with brush
shampooing with single or multi-disk cleaner and spray
extraction
water soluble stains with carpet detergent
67
Velvet:
LINIC-V 700
q 20 cm x 25 cm
q 40 cm x 50 cm
Loop Pile:
LINIC-S 800
q 20 cm x 25 cm
q 40 cm x 50 cm
If required, we shall be happy to provide you with larger sample pieces.
Please get in touch with our sales department.
Company:
Contact Person:
Street:
Zip/Post Code:
Country:
Phone/Fax:
e-mail:
Town:
Please send your order by Fax to: +49 (0) 711 3402-155 (Germany)
+49 (0) 711 3402-156 (Europe/Overseas)
68
Company Profile
For the past thirty years Object Carpet has been among Germany’s and Europe’s
leading suppliers of high-quality, wall-to-wall carpeting for ambitious project
architecture. With one of the largest product lines, we are able to cater for all
design and technological requirements. With a global marketing strategy in mind,
we respond to the differences in individual markets with a flexible sales policy
for each country.
Our products are sold successfully all over the world by our own sales centers
and by trade agencies both at home and abroad. The long-term cooperative alliances with our agents, based on partnership, support the continuity of Object Carpet’s presence world-wide.
In addition to the high standard of quality and service, our business partners and
customers profit from the outstanding competence in design and color which have
set Object Carpet apart for many years. Furthermore, our studio has impressed
with its high level of flexibility and commitment in preparing individual solutions
which cater for your personal design and color requirements.
Germany
Object Carpet GmbH
c/o Mr. Rolf Geiger
Rechbergstraße 19
D-73770 Denkendorf
Phone: + 49 (0) 711 3402-141
Fax:
+ 49 (0) 711 3402-155
Mobile: +49 (0) 172 7322501
[email protected]
Europe/Overseas
Object Carpet GmbH
c/o Ms. Iris Seiffer
Rechbergstraße 19
D-73770 Denkendorf
Phone: + 49 (0) 711 3402-128
Fax: + 49 (0) 711 3402-156
[email protected]
www.object-carpet.de
69
Product Description
Laminate Flooring
Technical data:
Witex Country Loc Beech (BU 275 CL/CCL)
and/or Witex LocTec Maple (AH 300 LN/SLN)
Panel size:
Length 1,280 mm, width 192 mm, thickness 8 mm
Product construction:
Particularly hard special resin impregnation
Resin impregnated finish film, resistant to UV light
Coreboard:
Aqua Protect (Witex Country Loc)
HDF Protect (Witex LocTec)
Resin impregnated counterbalance film for
dimensional stability
Sound Protect Mat directly combined with the
panel (Witex CountryComfort Loc, Silent Comfort
LocTec)
Level of use:
32 commercial - medium use (Witex Country Loc)
31 commercial - moderate use (Witex LocTec)
Unevenness:
< 0.15 mm
Glueing:
Floating installation (in individual cases can be
directly stuck in connection with Silent Comfort
Country Loc)
Suitable
for underfloor heating:
Yes
Packaging:
1 packet = 8 elements = 1.97 m2
70
Product Description
Laminate Flooring
General Information
Definition: Laminate flooring is a hard flooring with an upper surface consisting
of one or more thin layers of fibrous sheet material (mainly paper), impregnated
with thermosetting amino resins (mainly melamine resins). These layers are pressed directly onto a core material in case of direct-coated laminate flooring.
General Use
The requirements regarding flooring vary according to the use of characteristics
for the commercial sector. Please consider any company-related requirements
when choosing the laminate flooring elements.
Provisional Measures
l Fix felt pads under chair and furniture legs
l Use soft chair castors which are suitable for laminate flooring
l Provide sufficient foot mats or walking space near doors outside
l In the case of underfloor heating laminate flooring surface temperature < 28°C,
especially when carpets are laid on top
Automobiles on Laminate Flooring
Harmless. Additives such as softeners in car tyres of various manufacturers are
no problem for laminate flooring. Stains which are possible on other surfaces do
not occur.
Laminate flooring stands the weight of automobiles, but require, however,
special pressure-resistant sound-proofing materials and a flat base.
Care Guidelines – Basic Care
Cleaning should be carried out by means of vacuum cleaning or sweeping. The
floor can be wiped with a moist, well wrung-out cloth. Use clear water without
any agents or water with special laminate cleaning agent. Dry the surface
thoroughly afterwards using a clean cloth. Pools of water must be immediately
wiped up. Laminate flooring is very durable. It does not need any special treatment. The surface consists of high-quality melamine resins and not wood.Therefore please refrain from using floor polish or other cleaning agents. Warning:
Do not use steam cleaning machines. The panels may not be treated or sealed.
We will gladly inform you about special cleaning issues in individual cases.
Room Temperature
In order to prevent undesired gaps forming between panels, the surrounding temperature should be about +20°C and the relative humidity between 50 - 60 %.
71
Please tick box for desired sample
Witex Country Loc Collection
Witex Loc Collection
Beech BU 275 CL/CCL
Maple AH 300 LN/SLN
q 35 cm x 19.2 cm
q 35 cm x 19.2 cm
On request, we can provide you with larger samples. Please contact Mr. Röben
and Mr. Barmeyer at our commercial department.
Company:
Contact:
Street:
Zip/Post Code:
Country:
Phone/Fax:
e-mail:
Town:
72
Company Profile
Witex AG offers high-quality, creative and environment friendly solutions for
modern and sophisticated living. Individual comfort and cosiness is of great
importance. For people by people.
Functionality and individuality are emphasized. Good ideas with loving care
taken to details for a higher quality of living. At work and also at home. That is
the philosophy of the company and brand of Witex.
First-class quality, down to every detail. This standard is ensured by ultra-modern
production sites and constant quality checks. The strategically selected production sites enable requirement-oriented serving markets in Europe, Asia and on
the American continent. The know-how and knowledge management of Witex AG
derives from the research developments of the local subsidiaries Indutec and
WPT as well as from the research and development of Witex itself. That is why it
is so successful.
For further questions or information requirements please contact:
Witex AG
Nord-West Ring 21
32832 Augustdorf
Phone: +49 (0) 5237 609-0
Fax: +49 (0) 5237 609-309
www.witex.com
73
Product Description
Multi-Layered Parquet Maple, Beech
Country house planks S
Wood types
Canadian Maple or Beech
Element size
Product construction
One strip parquet; upper layer approx. 3,5 mm;
intermediate approx. 9,0 mm softwood; base layer
approx. 2,0 mm; rotary cut veneer
Lacquers
5-layer sealing coat with environmentally friendly
and odourless acrylic lacquer; UV hardened;
silk-dull lustre; excellent abrasive resilience
Glue
Glued with polyvinyl acetate disperson.
The requirements of the Emissions-Class E1
are not exceeded
Moisture
8 % +/- 2 %
Precision
< 0.2 mm
Installation
can be installed in a full surface bonded or
a floating system
Brinell hardness
Canadian Mapel - 4.8 N/mm2
Beech - 3.9 N/mm2
Swelling/shrinkage
Maple - 2.7% radial, 4.3% tangential
Beech - 5.8% radial, 11.8% tangential
Underfloor heating
suitability
no
Packaging
Box = 6 elements = 2.05 m2
74
Product Description
Ship flooring
Wood types
Canadian Maple or Beech
Element size
Product construction
Three strip parquet; upper layer approx. 4,0 mm;
intermediate approx. 7,5 mm softwood; base layer
approx. 2,5 mm; rotary cut veneer
Lacquers
5 layer sealing coat environmentally friendly and
odourless acrylic lacquer; UV hardened, silk-dull
lustre, excellent abrasive resilience
Glue
Glued with polyvinyl acetate dispersion. The
requirements of the Emissions-Class E1 are not
exceeded.
Moisture
8 % +/- 2 %
Precision
< 0.2 mm
Installation
can be installed in a full surface bonded or a
floating system
Brinell hardness
Maple - 4.8 N/mm2
Beech - 3.9 N/mm2
Swelling/shrinkage
Canadian Maple - 2.7% radial, 4.3% tangential
Beech - 5.8% radial, 11.8% tangential
Underfloor heating
suitability
not suitable
Packaging
Box = 8 elements = 3.62 m2
75
Product Description
Multi-layered parquet
General information, Canadian maple exquisite or beech as ship flooring or
country house planks S: Floor covering made from multi-layered parquet, durable by virtue of multi-coating of UV resistant acrylic enamel. The costly three-layered construction with off-set angled grain guarantees optimal dimensional stability.
Use in general: Because of the UV resistant multi-coat sealing in the factory,
Object +Parkett ready-made parquet is a long-lasting product which is easy to
maintain. Dirt trap zones in the entrance area contribute significantly to the preservation of the parquet floor. This area should be sufficiently large to ensure
that the parquet surface is not spoiled by sand and water. Furniture should be fitted with felt pads and office chairs fitted with castors type W, suitable for hard
flooring.
Use with automobiles on parquet: Because of the large number of additives,
such as softeners, in the car tires of all manufactures, direct contact between car
tires and parquet should be prevented. A separation layer made from transparent
acrylic material should be laid throughout between tires and parquet.
Maintenance instructions - initial treatment: After a new floor has been laid, it
is recommended that the parquet area be treated initially with a normal commercially available product (Berger-Seidle: Everclear L93, Bond Pacific Parket Polish,
Loba: Parkettglanz, CC-Dr. Schutz: Parkettglanz, Isra; Aqua Star GW or Pallmann:
Parkett Polish).- These products should be applied undiluted. They produce a
sheen and do not require polishing.
The additional protective coating significantly enhances the long life of the par-
quet. For maintenance, the aforementioned products are diluted with water. Clean
with the minimal amount of moisture.
Maintenance instructions - thorough cleaning / day-to-day maintenance: A
soft brush or vacuum cleaner is used for day-to-day maintenance. If there is a lot
of dirt, moist cleaning with a neutral cleaning product additive is recommended
(Berger-Seidle: 193 Everclean diluted, Bona: Pacific Parket Polish diluted, CC-Dr.
Schutz: Parkettpflege, Isra: Aqua Clean, Loba Parkettglanz diluted, Pallmann:
Wischpflege special). Too much moisture must be avoided. Never use steel wool or
steel chips for cleaning. Stains and moisture must be removed immediately. Stubborn stains can be removed with white spirit or a 50% alcohol solution. On no
account should scouring products or other chemical detergents be used here.
Maintenance instructions - resealing: After many years use, the parquet floor
can be refurbished by sealing it afresh. The need to do this depends on how often
the floor is used. Areas which are used a lot should be resealed in good time. The
resealing is to be done by an experienced tradesman. Our wear layers can be
resealed 2 or 3 times if the work is carried out correctly.
Room air conditions: In order to prevent unwanted formation of gaps, the
ambient temperature should be approx. +20°C and the relative humidity between
50 - 60 %.
76
Country house planks S:
Canadian Maple
Beech
q 35 cm x 15.5 cm
q 35 cm x 15.5 cm
Ship flooring:
Canadian Maple
Beech
q 35 cm x 20.6 cm
q 35 cm x 20.6 cm
If required, we shall be pleased to supply you with a larger sample piece. Please
contact our sales department.
Company:
Contact Person:
Street:
Zip/Post Code:
Country:
Phone/Fax:
e-mail:
Town:
77
Company Profile
Object +Parkett - pure wood. Selective parquet flooring to inspire. Manufactured
with state-of-the-art technology. Woods which with their specific qualities open
up every area of application and bridge the functional appearance of architecture
with the need for perceptible atmosphere.
For the past ten years Object +Parkett has been among Germany's and Europe's
leading suppliers of high-quality, parquet flooring for ambitious project architecture and exclusive living. With a global marketing strategy in mind, we respond
to the differences in individual markets with a flexible sales policy for each country. Our products are sold successfully all over the world by our own sales centers
and by trade agencies both at home and abroad.
In addition to the high standard of quality and service, our business partners and
customers profit from the outstanding competence in design and finishing which
have set Object +Parkett apart for many years. Furthermore, our team has impressed with its high-level of flexibility and commitment in preparing individual solutions which cater for your personal design requirements.
Contact
Object Parkett GmbH
c/o Mr. Joe-Frank Gonschor
Rechbergstraße 19
D-73770 Denkendorf
Phone: +49 (0) 711 934939-0
Fax: +49 (0) 711 934939-9
[email protected]
www.object-parkett.de
78
Product Description
Entrance Mats
Entrance mat, Kampmann
Type 5414, Tuftigard Granit, color gray, frame silver aluminum, walked-on layer
100% polyamide velvet with polyester middle layer. Scraper profile aluminum
natural (silver aluminum 9), joined with high-strength wires, ends locked into
place in aluminum facing profiles. Wipe strips also available in solid black profile
rubber.
Entrance mat, Coronet
CoroTec22, colors black or dark gray. Aluminum profiles, highly stable under load
(if required also in stainless steel), with integrated hinges, rollable, fitted with
bristle-fused strips (in combination with needled felt strips), replaceable brush
batons (course coating) and needled felt (smooth coating and moisture absorbent).
Easy to clean. Suitable for the disabled, suitable for wheelchair and trolleys
Manufacturer
Kampmann GmbH
Postfach 6044
D-49794 Lingen
Manufacturer
Coronet
König & Böschke GmbH
Engerstr. 5
D-32051 Herford
Phone: +49 (0) 591 7108-0
Fax:
+49 (0) 591 7108-300
www.kampmann.de
Entrance mat, Emco
Type diplomat 517/4 RB, strips of coarse hair rep and brushes, color anthracite.
Rollable mat with support profiles made from impact sound absorbing aluminum.
Rods connected with plastic coated galvanized steel cable.
Manufacturer
EMCO Bautechnik GmbH& Co. KG
Postfach 18 60
Phone: +49 (0) 591 9140-0
D-49803 Lingen (Ems)
Fax: +49 (0) 591 9140-852
www.emco.de
Phone: +49 (0) 5221 5999-0
Fax: +49 (0) 5221 5999-10
www.coronet-ckb.de
Carpet tiles DESSO DLW Textil
Protect, color 215.052, anthracite
Dirt absorbing carpet tile, a combination of wool and polyamide with high pile
density and tufted nylon thread. The bristly structure automatically loosens coarse dirt and releases moisture. Clean with a vacuum cleaner fitted with brushes.
Manufacturer
Stuttgarter Straße 75
D-74321 Bietigheim-Bissingen
Phone: +49 (0) 7142 71-185
Fax: +49 (0) 7142 71-610
www.desso-dlw.de
79
Product Description
Door Lever Fittings
Standard door fitting HEWI 133R with roses 305.23R/306.23
Technical information
l R-system door lever fitting
l
Designed for projects according to DIN 18255
and DIN EN 1906, user category class 3
l
Fast and simple installation: slot lever handle
into rose/backplate inner, which is
mounted on the door
l
Nylon-steel composite structure
l
Automatic-latching spring loaded clip provides
almost all round lock bearing. Additional connection with V-shaped, groove in
spindle
l
Fastening with socket-screws and support pins, concealed and non-loosening
Window handle, item number: HEWI 130FG.3
Nylon, diameter 23 mm, with corrosion resistant steel core, lever held by spring
clip at 90°, roses with support pins and cap for concealed fitting, fixing points
43 mm centre to centre, spindle 7 mm square, length 30 mm. Deliverable as well
as lockable, with other pin lengths and with 45° stop, slit ventilation on request.
Color 92 anthracite gray
l
HEWI fastening technology (locking technology) is identical for all HEWI room
accessories, regardless of the material they are made of. Therefore, hardware
accessories of different designs can be combined.
l
Special hardware accessories with fire-resistant, anti-panic and vacant-occupied
features are available in stainless steel and nylon in accordance with current DIN
standards.
l
In the same way, hinges and handles of various diameters and center to center
sizes are available in stainless steel and nylon with the same surfaces and colors.
Material
l Rose/backplate inner: polyamid-steel composite
l Female part: nylon-steel composite (steel-core lever
handle) galvanised steel core coloured synthetic
material. Recyclable.
Color 92 anthracite gray
80
Product Description
Door Lever Fittings
Stainless steel standard door fitting HEWI 160 with roses 305.20/306.20
Technical information
l R-system door lever fitting
l Designed for projects according to DIN 18255 and DIN EN 1906 user category
class 3
l Fast and simple installation: slot lever handle into rose/backplate inner, which
is mounted on the door
l Nylon-steel composite structure
l Automatic-latching spring loaded clip providing almost all round lock bearing.
Additional connection with V-shaped, groove in spindle
l Fastening with socket-screws and support pins,
conceald and non-loosening
Material
l Rose/backplate inner: nylon-steel composite
l Door lever handle, stainless steel round tube
with 1.5 mm wall thickness (material number
1.4301)
l Roses, stainless steel metal plate with 1.5 mm
wall thickness (material number 1.4301)
Stainless steel window handle, item number: HEWI 160XAFG.1
stainless steel, diameter 20 mm, lever held by spring clip at 90°, installed on oval
roses 66 x 30 mm with support pins and cap for concealed screw mounting,
fixing points 43 mm centre to centre, with 7 mm square spindle, 30 mm long.
Deliverable and lockable with other spindle lengths on request.
Manufacturer
HEWI
P.O. Box 1260
D-34442 Bad Arolsen
Phone: +49 (0) 5691 82-0
Fax: +49 (0) 5691 82-319
www.hewi.de
81
Product Description
Door Fittings
Door fittings, FSB
Lever handle for framed doors FSB 0607 21 (FSB 1107)
alu natural coloured anodised or satin stainless steel (color 6204)
l
FSB project fitting 7230 13 (FSB 1010)
l project fittings with compensation bearing
and 8 mm FSB Stabil-spindle
l turn ably fixed on roses
l invisible fixings on both sides
l roses and escutcheon, diameter 55 mm
l roses with lugs 8,5 mm diameter
l alu natural coloured anodised or satin stainless steel (color 6204); matching FSB window
handle 3484 08
l project fittings with compensation bearing
and 8 mm FSB Stabil-spindle
l alu natural coloured anodised or satin stainless steel (color 6204); matching FSB window
handle 3440 08
l alu natural coloured anodised or satin stainless steel (color 6204)
Lever handle for fire and smoke stop doors FSB 0607 22 (FSB 1107)
FSB Project fittings with compensating bearing deal very ably with the considerable axial and vertical forces that arise given doors that are in virtually
constant use. Lever sets: You can wipe dusk with a moist towel.
82
Product Description
Door Fittings
l project fittings with compensation bearing and
8 mm FSB Stabil-spindle
l alu natural coloured anodised or satin stainless steel, passend dazu
FSB window handle 3409
Lever handle for framed doors
FSB 0658 21 (FSB 1108)
l alu natural coloured anodised or satin stainless steel
Lever handle for fire and smoke stop doors
FSB 0658 22 (FSB 1108)
FSB Pull handle 6616
l straight formed, FSB oval series (diameter 40 x 28 mm)
l fixed by laterally offset strap-type brackets
l Total length: 550 mm / C:C 350 mm
l alternative: total length: 650 mm / C:C 450 mm
l satin stainless steel
l half rounded formed, FSB oval series (diameter 40 x 28 mm)
l with offset strap-type brackets
l Total length: 504 mm / C:C 210 mm
l alternative: total length: 745 mm / C:C 350 mm
l FSB oval series (diameter 40 x 28 m); U-shaped, welded
l total length: 350 mm or 450 mm
Manufacturer:
Franz Schneider
Brakel GmbH + Co
Nieheimer Straße 38
33034 Brakel
Phone: +49 (0) 5272 608-127
Fax: +49 (0) 5272 608-300
www.fsb.de
83
Product Description
Solar Protective Glass
Solar protective insulating glass, INFRASTOP, flat sheet
l
Features: INFRASTOP, neutral 51/37, solar protective glass layered, based on
wrought products Pilkington Suncool.
The solar protective insulating glass is characterized by a high-degree of selectivity, i.e., high light transmitting capacity but at the same time minimum total
transmitting capacity. This is achieved with a very thin protective stainless
steel layer facing the gap between the sheets. In addition to the good solar protective characteristics, with k-values up to 1.0 W/m2K, INFRASTOP meets all
the requirements for high-quality heat insulating glass called for today.
l
Cleaning: Do not use alkaline suds and acidic substances nor products containing fluorine. Grease and residual sealant are removed with non-aggressive solvents (spirits, isopropyl alcohol). Cleaning with scouring or abrasive materials
is only permissible for individual specs of dirt.
Technical features
l Light transmitting capacity
l Luminous reflectance external
l Luminous reflectance internal
l Total energy transmitting capacity
l Selectivity certification
l Normal emissivity
l k-value (16 mm)
51 %
16 % (DIN 67 507)
10 %
37 %
1.38
0.10 (EN 10 240)
1.3 Argon/SZR (DIN 52 619)
1.6 Air/SZR
Manufacturer
Pilkington Deutschland AG
Haydnstrasse 19
D-45884 Gelsenkrichen
Phone: +49 (0) 649 209-1680
Fax: +49 (0) 649 209-2056
www.pilkington.com
84
Product Description
Exterior Awnings
Exterior awnings, WAREMA
Markisolette, type series 100, guide profiles - rounded extruded aluminum, RAL
9006 white aluminum. With the Markisolette a part of the adjustable canopy
remains in the vertical, the other part can be projected outwards. The linkage
arms with molded springs are also available with gas-pressure springs and highimpact protection (against wind gusts). The height of the projection can be adjusted to whatever level is required.
l
Drive: tubular motor, 230 V, 50 Hz, connection capacity adjusted to installation
size. Protective system IP43 at the upper and lower end positions automatically
switches the motor off. Individual, group or façade control is possible.
l
Covering: semi-circular surround type 6.3, curved aluminum sheet, 2 mm thick,
internal radius 71 mm. Total height 82 mm, maximum individual length 2,500
mm.
l
Canopy: woven screen, color 3517 gray, made from PVC coated glass fiber. 85%
of the incident solar radiation is curbed. Heavy duty quality weighing approx.
500 g/m2. The edges are strengthened at the side by a thermo-plastic process.
l
Maximum width: 2,500 mm, maximum height: 3,500 mm
Maximum width with coupled canopies: 7,500 mm
l
l
Technical features
l Radiation transmission
l Radiation reflection
l Temperature compatibility
l Stability to light
l Burning classification
l Weight
5%
15 % (DIN 67 507)
-35°C – +50°C
7- 8
DIN 4102/B1, self-extinguishing
500 g/m2
Manufacturer
WAREMA Renkhoff GmbH
Vorderbergstraße 30
D-97828 Marktheidenfeld/Main
Phone: +49 (0) 9391 20-0
Fax: +49 (0) 9391 20-279
www.warema.de
Maintenance: Clean woven screen only with water and liquid detergent (washing up liquid, soap) additive. Do not clean with high pressure cleaner.
85
Product Description
Translucent Interior Blinds
Translucent interior blinds, Silent Gliss
Alu Close, color 30 silver, Trevira CS, 100% polyester aluminized
l Optimum solar protection effect and pleasant light incidence.
l Transparency grading
dense
DIN 4102/B1
DIN 54004, 5-6
l Light transmission
6%
l Light reflection
57 %
l Weight
220 g/m2
l Material width
186 cm
l Maintenance
with a damp cloth
Manufacturer
Silent Gliss GmbH
Rebgartenweg 5
D-79576 Weil am Rhein
Phone: +49 (0) 7621 6607-0
Fax:
+49 (0) 7621 6607-37
Lightscreen, color 3 gray, woven glass fiber 42 %, PVC coating 58 %
l Optimal solar protection effect and pleasant light incidence.
l Transparency grading
dense
DIN 4102/B1
DIN 54004, 7-8
l Light transmission
21 %
l Radiation transmission
23 %
l Radiation reflection
36 %
l Weight
350 g/m2
l Material width
200 cm
l Environmental friendliness
in accordance with Öko-tex standard
l Maintenance
Remove dust with a vacuum cleaner. Clean
with a cloth and cold water, maximum temperature 30°C, 50 g soap powder per liter. Rinse
in clear water. Dry vertically and in rolled out
position. Hang evenly, do not rub hard.
86
I M P R I N T
Published by:
DaimlerChrysler AG
Coordinated by:
Matthias Storz,
DaimlerChrysler (MKP/MBP)
Architecture Center
70546 Stuttgart
Phone: +49 (0) 711 1791-289
Fax: +49 (0) 711 1791-456
e-mail: matthias.storz @daimlerchrysler.com
Produced by:
Redaktionsbüro Syntax GmbH
Birkenhofstrasse 10, 70599 Stuttgart
Phone: +49 (0) 711 451033 -10
Fax: +49 (0) 711 451033 -11
as per October 2002
This brochure/document contains confidential information which may only be
used for planning of Mercedes-Benz operations in consultation with the Architecture and Trademark Center of DaimlerChrysler AG. This brochure/document may
not be passed on to third parties.
The current documents deal with planning assistance and tendering documents
for the drawing up of project plans and performance specifications. In this connection, DaimlerChrysler AG accepts no liability for the construction plans and/or
construction work.
Architecture Center
For further information please contact the MKP/MBP team at:
Location: Plieninger Straße 148B l Postal address: DaimlerChrysler AG, MKP/MBP, HPC Z101, D-70546 Stuttgart l Phone: +49 (0) 711 1791-276
e-mail: [email protected] l Intranet: http://architekturcenter.daimlerchrysler.com
l
Fax: + 49 (0) 711 17 91-654

Product Description - Mercedes

Transcription

Similar documents

Six Days of Creativity

Heavy lifting made easy. - RoadStars - Mercedes-Benz

Fire Fighting PDF

THE SEVEN COLOR CONTRASTS

RC3017

The Power of Contrast

POINTILLISM

Fall Family Celebration

Mitsubishi`s Rolling Showroom Arrives at Urner`s in Bakersfield on