Tong Repair Facility - Core Creative LLC Advertising

Tong Repair Facility
In addition to stocking hydraulic tubing tongs and
rod tongs to meet your immediate well servicing
needs Maverick Oilfield Specialties offers full
service Tong Repair. With over 30 years of tong
servicing experience we are prepared to repair and
refurbish all major brand of tubing, casing, drill pipe,
and rod tongs. Our goal is to eliminate your down
time so we offer field repairs at your site in addition to
repairs in our facility. We carry a full inventory of parts
so our turn around time is second to none so give us
a call at 281-449-6251 for tong sales, parts support,
complete re-builds, or if you simply have technical
questions we can help answer for you. Maverick
Oilfield Specialties is prepared to meet all of your
power tong needs.
Websi te : w ww.m a v e r i c ko i l f i e l d .c o m
Maverick Oilfield Specialties is a proud member of
the Association of Energy Service Companies with
over 100 years combined experience and 20,000
square feet of inventory. Remember, in addition to
tubing tongs and rod tongs we stock just about
everything you need “From The Crown To The Ground”
including expendables and safety equipment.
We are ready to assist you in any way we can. Just
give us a call. We will take care of all your needs- from
rope, soap, and dope to complete rig up packages.
We stock everything from pliers and pipe wrenches
to BOP’s and Power Tongs. Let Maverick Oilfield
Specialties be your one stop shop...
“From The Crown To The Ground”
MAVERICK OILFIELD SPECIALTIES, INC.
“From The Crown To The Ground”
16135 Aldine Westfield Rd.
Houston, TX 77032
Ph: 281-449-6251 | Fax: 281-987-8633
[email protected]
Tubing Tongs
Maverick M58-93-R Hydraulic Tubing Tong
The Maverick Power tong is a time tested design that
is accepted through out the industry as a rugged,
reliable tong with the pneumatic system coupled
with a manual backup and a two speed operation
with controlled torque. Maverick stocks the M5893-R to meet your immediate needs.
Tubing Tongs
Maverick RSX Open-Head Tubing Tong
The Maverick RSX is a gate type tong that
incorporates a four-way valve control to reverse the
tong without roll-over. Balanced spring suspension
increases its handling ease. Using the familiar jawand-bushing biting system with a control valve
that can be operated from the front or rear lever,
Maverick’s RSX Open-Head Tubing Tong is the
solution for your for handling needs.
Rod Tongs
Model Mark TP-IV Hydraulic Rod Tong
The Mark IV hydraulic rod tong delivers ample power
to make and break out all rod sizes while reducing
cross threading errors. A single unitized jaw assembly
fits 5/8”, 3/4”, and 7/8” rods without change. 1” and
1 1/8” rods are handled with a separate jaw assembly.
Features
Features
Features
—Traditional chain-driven, oil-bath lubrication system
—Uses the familiar five-jaw and jaw carrier gripping
system
—Improved case sea
—Pneumatic or manual back up
—Roller chain final drive
—Hydraulic power system
—Hydraulic lift cylinder
—2 speed operation with controlled torque
—More steel weight in case to reduce potential of case
spreading
—Gussets added to bottom case to reduce potential of
case spreading
—Integral sprocket and outer ring
—Traditional chain-driven design
—Uses the familiar jaw-and-bushing biting system
—Control valve can be operated from front or rear
control lever
—Safer than manual rod wrenches
—Reduced incidence of cross threading
—Increased accuracy and consistency of makeup
torque
We can drop ship to you in the field and product is
also available for pick up at our facility. Call our office
to check availability.
Call Maverick at 281-449-6251 for specific jaw and
bushing assemblies and product specifications.
Websi te : w ww.m a v e r i c ko i l f i e l d .c o m
E - Ma i l : ma v 1 61 35@ ma v er i c k o i l f i el d .com
Call Maverick for specific parts corresponding to
your rod size needs. We keep various inner rings and
back up wrenches on site and in stock.
P hone : 281 - 449- 6251