F41 Instruction Manual

3
3-1
Attach TV to Wall Plate
3-2
Unlock the Wall Plate
Hang Your TV
HEAVY! Use assistance with this step.
Press the button on wall plate 15
to release the safety latch.
F41 Instruction Manual
Use two people to hang the TV, to visually ensure TV bracket 01 is
hung correctly onto wall plate 15 (see side view).
We’ll Make It Stress-Free
IMPORTANT: DO NOT lower TV straight down onto wall
If you have any questions along the way, just give us a call.
1-888-333-9952 We’re ready to help!
plate 15 -- this will engage the lock. Safety latch must be released
for proper installation (See STEP 3-1).
01
Thank you for choosing Sanus VuePoint! Please take a moment to let us know how we did:
01
15
Call us: 1-888-333-9952
01
15
Find us on Facebook: SANUS
Side View
Side View
3-3
3-4
Lock the Wall Plate
Press down on the safety latch until the
button pops up AND you hear a "click".
CAUTION: Avoid potential personal
injury or property damage! The safety
latch must be locked, so the TV is
securely fastened to the wall plate 15 .
Place magnetic
leveling feet 19 in
the lower corners of
the TV.
14
B
If you used spacers
14 in STEP 1-2,
stack both magnetic
leveling feet 19
together and place in
the lower center of
the TV.
For non-metal back
TVs, use adhesivebacked disc 20 .
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!
Button
19
19
20
Side View
2
Adjustments
Does your TV weigh
more than 80 lbs.
(36 kg) including
accessories?
Level
15
Slide the TV side to side.
Make sure your TV is
locked to wall plate 15
(STEP 3-3).
Remove the TV.
Loosen both screws 18 ,
adjust level, then retighten
the screws (STEP 2-3).
18
Disconnect your cables.
Unlock wall plate 15
(STEP 3-1).
Lift the TV up and away.
3
0.20
5.1
1.5°
15.91 404.0
2.95 75.0
0.98
25.0
Concrete kit (#CMK3)
required
Perfect!
Call Customer Service: 1-888-333-9952
INCLUDED
Do you have all of
the tools needed?
5°
4
Ready to begin?
Wood Stud
Applications
Concrete
Applications
Awl
Pencil Tape Measure Screwdriver Electric Drill
Square Driver Bit
1/8 in. (3.2 mm)
Wood
Drill Bit
5/16 in. (8 mm)
Concrete
Drill Bit
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at 1-888-333-9952.
2.77
70.3
CAUTION: Avoid potential personal injuries and property damage!
LEVELING
0.34
8.8
Unsure?
15
( in. [mm] )
1.12 28.6
Solid concrete or
concrete block?
Drywall with
wood studs?
DO NOT install
into drywall alone
Remove the TV
16.00 406.4
17.75 450.9
Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call
1-888-333-9952 to find a compatible mount.
What is your
wall made of?
Stud Finder
Dimensions
No — Perfect!
80 lbs.
(36 kg)
CAUTION:
Lateral Shift
6902-002116 00
SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA
1
20
Follow us on Twitter @sanussystems
©2014 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
For non-metal back
TVs, use adhesivebacked disc 20 .
15
Side View
Leave a review: vuepoint.sanus.com
Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the
information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information
contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein.
Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
No Tilt Feature (OPTIONAL)
A
Email us: [email protected]
15
15
1.10
27.9
OPTIONAL
TILT
3.40
86.4
LATERAL SHIFT
●
●
●
●
This product includes directions and hardware for use with wood studs – DO NOT install into drywall alone.
The wall must be capable of supporting five times the weight of the TV and mount combined.
Do not use this product for any purpose not explicitly specified by manufacturer.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
1
Parts and Hardware
WARNING: This product contains small items that could be a
choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do
not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
01
x1
M4/M5
10
x2
M5 x 12mm
01
M6/M8
Correct
2
M8 x 35mm
Parts and Hardware for STEP 2
Wall Plate
15
x1
16
x1
Driver Bit (Square)
Wood Screws (Wall Plate Screws)
WOOD STUD OPTION 2A
M8 x 20mm
* (NOT INCLUDED)
C1
x2
2-2A
Verify Your Wall
Min. 1 1/2 in. (38 mm)
Max.
5/8 in.
(16 mm)
Find the Stud Centers
2
1
Min. 3 1/2 in. (89 mm)
3
2-3A
Attach the Wall Plate
3
2
1
15
Min. 16 in.
(406 mm)
17
property damage!
● Drywall covering the wall must not exceed 5/8 in. (16 mm).
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm)
nominal 1½ x 3½ in. (38 x 89 mm).
● Minimum horizontal space between fasteners: 16 in. (406 mm).
● Stud centers must be verified – not all walls have
conventional 16 in. (406 mm).
Locate the
studs using a
stud finder.
Probe the wall
with an awl or
drill bit to verify
the stud edges.
Mark the
center of
both studs.
18
16
15
CAUTION: Avoid potential personal injuries and
2-1B
Fischer UX8x50R Anchor
Parts for STEP 3 (OPTIONAL)
Disc
(Adhesive backed)
20
x2
**
medical device such as a pacemaker or implantable cardioverter defibrillator
WARNING: This product contains a magnet. If an implanted
(ICD) is in use, magnetic fields may affect the operation of those devices,
resulting in serious injury or death. If you have an implanted medical device,
keep at least 13 cm (5 in.) between your device and the magnet. Please consult
with your physician or medical professional prior to using this product.
CONCRETE OPTION 2B
For concrete installations:
Contact customer service at
1-888-333-9952 to have these
anchors shipped directly to you.
19
x2
02 03
Min. 16 in.
(406 mm)
Position wall plate 15 at your
desired height. Level, then
mark the two hole locations.
Drill two pilot holes using a
1/8 in. (3.2 mm) drill bit.
IMPORTANT: Pilot holes
must be drilled to a depth of
2.5 in. (63 mm).
Install wall plate 15 with two washers 17 and
screws 18 , using bit 16 .
Adjust leveling, if needed, then securely tighten
both screws 18 .
CAUTION: Improper use could reduce the holding
power of screws 18 . DO NOT over-tighten the screws.
#10 x 2 1/2 in.
Concrete Anchor Kit CMK3
(Magnetic Leveling Feet)
14
Attach Wall Plate to Wall
2-1A
Spacers
14
x2
Standoff
Inset
Holes
M6 x 35mm
M8 x 16mm
*
10 11 12 13
Too
Long
Cables
13
x2
18
x2
B
01
02 03
M6 x 20mm
17
x2
14
A
Correct
Too
Short
M5 x 35mm
12
x2
Washers
• Rounded Back TV
• Extra Space Needed [for cables or inset holes]
M4 x 35mm
M6 x 12mm
**
B
• Flat Back TV [AND TV closer to the wall]
04 05 06 07 08 09
11
x2
09
09
x2
A
TV Screws
M4 x 12mm
08
x2
Center TV bracket 01 on your TV's hole pattern and securely attach using hardware configuration A or B , depending on your TV needs.
— Too short will not hold the TV
— Too long will damage the TV
03
x2
02
x2
TV Screws
07
x2
M4
M5
Attach the TV Bracket
CAUTION: Verify thread engagment of the
screw or spacer/screw combination in STEP 1-2.
Washers
06
x2
1-2
M8
TV Bracket
05
x2
1-1 Select Your TV Screws
M6
Parts and Hardware for STEP 1
04
x2
Attach TV Bracket to TV
2-2B
Verify Your Wall
Attach the Wall Plate
2
1
Min. 8 in.
(203 mm)
3
4
15
Min.
8 in.
(203 mm)
Min. 16 in.
(406 mm)
CAUTION: Avoid potential personal injuries and
property damage!
● Minimum solid concrete thickness: 8 in. (203 mm).
● Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm).
● Minimum horizontal space between fasteners: 16 in. (406 mm).
● Mount wall plate 15 directly onto the concrete surface.
17
C1
15
Min. 16 in.
(406 mm)
Position wall plate 15 at your
desired height. Level, then
mark the two hole locations.
*
16
Drill two pilot holes using a 5/16 in.
(8 mm) masonry drill bit.
Insert two anchors C1 (Fischer UX8x50R
included in Concrete Anchor Kit CMK3 ).
IMPORTANT: Pilot holes must be
drilled to a depth of 2.75 in. (70 mm).
Never drill into the mortar between blocks.
CAUTION: Be sure the anchors are
seated flush with the concrete surface.
*
18
Install wall plate 15 with two washers 17 and
screws 18 , using bit 16 .
Securely tighten both screws 18 .
CAUTION: Improper use could reduce the holding
power of screws 18 . DO NOT over-tighten the screws.