5000D-100 - Innovations in Optics

s o lu t i o n s i n l i g h t
LED Driver 5000D-100
2A, 55V, Single Channel Driver/Controller
The Model 5000D-100 LED Driver/Controller provides constant current in either
continuous, pulsed or PWM modes. An embedded system adds network control with
10/100Mbps Ethernet connectivity. Drive current in continuous mode is selectable from 0.2 to 2.0A at 7.5 to
55VDC output. The output current setting is adjustable from 100% down to 10%, with duty cycle
adjustment from 100% to 1% via the Ethernet interface for a 100:1 dimming range. Both analog and digital
remote controls are built-in.
The 5000D-100 can also be used with third party LED illuminators as a constant current, DC to DC
driver/controller. Other features include: temperature sensors for both the current driver and its hosted
LED source; cooling fan operation tied to the +24 VDC input power; a panel mounted 3-digit display of the
operating current setting; and a DIN rail mounting clip.
Features:
• Mode: Continuous, pulsed, or PWM
• 10/100 Mbps Ethernet
Compatible Products:
• AuroraTM Classic Linesource
• Aurora UV Classic Linesource
• Graphical user interface
• Temperature sensors
• External Trigger
• Cooling fan operation
Typical Applications:
• Machine Vision
• UV Curing
• Digital display of current
• DIN rail mounting clip
Options:
• Heat Sink
• Heat sink and Fan
Table of Contents
Product Specifications..........................................................2
Ethernet/GUI Sample ...........................................................2
Installation Control Drawings............................................3
Additional Product Views.....................................................3
1
Copyright © 2015 Innovations in Optics. All rights reserved.
82 Cummings Park, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
www.innovationsinoptics.com
[email protected]
DS-5000D-100-150305
PRELIMINARY
5000d-100 2a, 55v driver/controller
specifications and gui
Parameter
Specification
Comment
Type
DC to DC constant current, dimmable
120W maximum power
Output Current
0.2 to 2.0 A DC
Set via local or Ethernet
Output Voltage
7.5 to 55 VDC
Single channel, cathode ground
Input Voltage
+24 VDC @ 7A max
+/-15%
Efficiency
90% minimum
At maximum load (2A, 55V DC)
P-P Current Noise
1% maximum
At maximum load (2A, 55V DC)
Cooling Fan Output
+24 VDC output, 1A max
Tied to input power
Over Temperature Sensors
In both line source and driver
LED status indicators (local)
Operating Modes
Continuous Mode (CM)
Pulsed
User selectable
External Trigger
Instant or with programmable delay
User enabled
Current Level Control
Local: Front panel control
Remote: Through Ethernet
User selectable
Current Control Range
Analog: 100% down to 10%
PWM: 100% down to 1% (Ethernet only)
Local or Ethernet
PWM Frequency
15 kHz
Maximum
Set Current Display
3-digit LED
Amps output current
Pulse Repetition Rate
10 kHz
Maximum
Pulse Width
20 msec
Minimum
Connectivity
10/100 Mbps Ethernet
RJ-45
Operating Temperature
-20° C to 45° C
<85% RH, non-condensing
Size and weight
105 x 108 x 41 mm, 500 grams
Mounting
Panel mounting, DIN rail adapter, or rubber bumper feet
gui for ethernet control
An RJ-45 Ethernet port for network integration is accessed with a utility application and an easy to use GUI enables field-programmability.
2
Copyright © 2015 Innovations in Optics. All rights reserved.
82 Cummings Park, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
www.innovationsinoptics.com
[email protected]
DS-5000D-100-150305
PRELIMINARY
5000d-100 2a, 55v driver/controller
installation control drawing
REVISIONS
FAN CONNECTOR
DB 9 OUTPUT CONNECTOR
REV
DESCRIPTION
DATE
ECO
1
PRERELEASE
10/23/14
KJ
Plot Date: Friday, January 30, 2015 Last Saved Friday, January 30, 2015 4:47:36 PM by: KeithJ
4.6
101.9
110.6
INPUT POWER
92.7
ETHERNET
TRIGGER
33.3
38
95.6
4.6
104.8
DIN RAIL MOUNTING
REMOVABLE
RUBBER FEET, REMOVE
FOR MOUNTING WITH SCREWS
INSTALLATION CONTROL DRAWING
UNLESS OTHERWISE SPECIFIED:
DRW
DIMENSIONS ARE IN MILLIMETERS
NOTES:
1. CONTENT FOR REFERENCE ONLY AND SUBJECT TO CHANGE
TOLERANCES:
1 PLACE DECIMAL:
2 PLACE DECIMALS:
3 PLACE DECIMALS:
ANGLE:
MATERIAL:
ENG
-----------------
KJ
KJ
DATE
INNOVATIONS IN OPTICS, INC.
1/30/2015
82 Cummings Park
Woburn, MA 01801
TEL: (781) 933-4477
FAX: (781) 933-0007
DATE
1/30/2015
TITLE
DATE
ENG APVD
FINISH:
THIS DRAWING AND SPECIFICATIONS
HEREIN ARE THE PROPERTY OF
INNOVATIONS IN OPTICS, INC. AND SHALL
NOT BE REPRODUCED NOR COPIED
NOR USED IN WHOLE OR IN PART AS
THE BASIS FOR THE MANUFACTURE
OR SALE OF ITEMS WITHOUT THE
EXPRESS WRITTEN PERMISSION OF
INNOVATIONS IN OPTICS, INC.
SIZE
B
5000D LED DRIVER IOI VERSION, ASSY
DWG. NO.
SCALE:
1:5
5000D-100-001-ICD
REV
1
SHEET 1 of 1
additional product views
end view (output connectors)
top view
bottom view (din rail)
3
Copyright © 2015 Innovations in Optics. All rights reserved.
82 Cummings Park, Woburn, MA 01801
p: (781) 933-4477 f: (781) 933-0007
www.innovationsinoptics.com
[email protected]
DS-5000D-100-150305
PRELIMINARY