promar1 sellsheet rev

ProMa r i ne r
S TA N D A R D P O W E R R AT I N G S
TM
Pro
o
New!
1
Series
Recreational Marine Battery Charger
Available in
4 Models
Single, Dual & Triple Bank
ProMar Fully Automatic Charging Inside
100%
Fully Automatic Multi-Stage Charging
WATERPROOF &
SALTWATER
Charge, condition & maintain batteries with a built-in safe maintenance mode.
TESTED
Single Preset Charging Profile
Use with Flooded (Lead Acid) or GEL batteries.
Expanded LED Status Center
At-a-glance AC power, charging and ready / maintain LED indicators.
Distributed-On-Demand™ Technology
Automatically charges & maintains your engine crank battery while
distributing all remaining charging amps to trolling motor batterie(s).
Built-in Quality & Safety
100% epoxy filled - Completely waterproof & shockproof.
Dual in line DC safety fuses (multi-bank models),
reverse polarity, ignition and temperature protection.
Pre-Wired for Easy Installation
2 Year Warranty
D
2
Distributed-on-Demand
Technology
Power & Charge Mode Indicators Dual In-line Safety Fuses
(Multi-Bank Models Only)
Certified to:
Marine UL 1236 SB
CSA C22.2 No. 107.2
FCC Class A
3097656
Professional Mariner, LLC 200 International Drive, STE 195 Portsmouth, New Hampshire 03801 | ph: 603.433.4440 fax: 603.433.4442 | www.promariner.com
Designed and
Constructed to:
ABYC A-28
specifications subject to change without notice
ProMa r i ne r
S TA N D A R D P O W E R R AT I N G S
TM
ProMar Fully Automatic Charging Inside
ProMar1 Fully Automatic Multi-Stage Charging Overview
How Distributed-On-Demand™ Charging Technology Works
Charging and Conditioning - Red and Blue LED On
ProMar1 will use its available charging amps until battery voltage is raised to 14.1 VDC
(safe for Lead Acid or Gel batteries) to complete charging while conditioning batteries.
Upon completion the charger will go to into its ready mode.
Other
5/5/5 15 amp
chargers
VS
Float / Maintenance - Blue and Green LED Only On
ProMar1’s red "Charging" LED will turn off indicating that the charging process is over and
the charger is now maintaining your batteries on-board. Only the blue and green LED will
remain on, indicating Power On / Float-Maintenance mode. A precision 13.5 volts finishing
voltage that maintains each battery (step down voltage regulation mode) which is perfect for
short or long storage periods and will never overcharge your batteries.
+
6.5
0
+
5
= 13
+
+
Trolling Battery Trolling Battery
Engine
Start Battery
0
= 10
Fully
Charged
Trolling Battery
Trolling Battery
Engine
Start Battery
14.1V
14
Distributed-On-Demand™ Charging Technology ensures 100% of the available charging
amps are fully utilized to meet the demand of each battery on-board. Let’s say your
engine start battery is fully charged and needs 0 amps from your “ProMar1” (5/5/3)
3 bank charger. No problem, the unused 3 amps will be automatically Distributed-OnDemand™ to your trolling motor battery(s) providing a total 13 amps for faster charging
versus only 10 amps that the conventional 5/5/5 charger would provide.
13.5V
13
12
Charging
Conditioning
Ready
11
ProMar1 5 Amp Single Bank
Model: 31405
ProMar1 5/3 8 Amp Dual Bank (OEM only)
Max. Batteries:
1 12V
Max. Batteries:
2 12V 12V
Ideal Use:
One 12V engine crank battery
or
One 12V house or trolling motor battery
Ideal Use:
DC Output:
Single 12V output at 5 amps maximum
One 12V engine crank battery
+
One 12V house or trolling motor battery
(for 12V trolling motor)
AC Input:
115 VAC / 60Hz
DC Output:
Dual 12V outputs at 8 amps maximum fully distributed
Cable Length:
6’ AC and DC
AC Input:
115 VAC / 60Hz
Cable Length:
6’ AC and DC
ProMar1 5/5 10 Amp Dual Bank
Model: 31410
ProMar1 5/5/3 13 Amp Triple Bank
Max. Batteries:
2 12V 12V
Max. Batteries:
3 12V 12V 12V
Ideal Use:
One 12V engine crank battery
+
One 12V house or trolling motor battery
(for 12V trolling motor)
Ideal Use:
One 12V engine crank battery
+
Two 12V trolling motor batteries
(for a 24V trolling motor)
DC Output:
Dual 12V outputs at 10 amps maximum fully distributed
DC Output:
Triple 12V outputs at 13 amps maximum fully distributed
AC Input:
115 VAC / 60Hz
AC Input:
115 VAC / 60Hz
Cable Length:
6’ AC and DC
Cable Length:
6’ AC and DC
Note:
5
Fully
Charged
Typical Average Voltage
Volts
6.5
Model: 31408
Model: 31413
For use with Group 24 through 34 Flooded (lead-acid) and GEL batteries. Not for use with AGM (Absorbed Glass Matt) or 4D or 8D large capacity batteries
Professional Mariner, LLC 200 International Drive, STE 195 Portsmouth, New Hampshire 03801 | ph: 603.433.4440 fax: 603.433.4442 | www.promariner.com
specifications subject to change without notice
121312A