135 PErFOrMANCE EXHAuSt

PErFOrMANCE EXHAuSt
135
Cat-Back Performance Dual Exhaust System with resonator tips
nd
al Sou
n
o
i
t
p
Exce
eased
r
c
n
I
h
Wit
ower
Horsep
Available in Black
Powder Coat Blunt tip,
Stainless Steel Blunt tip or
Stainless Steel Angle tip
Cat-Back Exhaust Systems have a straight-through design that
reduces back pressure for more low-end torque, increased
horsepower and better fuel economy. Replaces the stock exhaust
system from the catalytic converter back. Manufactured from
16-gauge, mandrel bent aluminized steel, increasing flow up to 20%
more than stock. Exhaust systems have 3-1/2” diameter resonator
tips that replace the original muffler. Easy bolt-on installation, no
welding required. Hangers, fasteners and steel clamps are included.
Exhaust exits the rear of truck.
▲ These are longbed systems; front extension pipes will need to be cut to fit
* After
the sell price means Oversize Part Charge.
Your order will incur a charge of $20.00 for each
oversized part. Due to packing and/or transportation
requirements, please allow additional time for delivery.
Oversized Parts are not available for air delivery.
48-5512
Cat-Back Systems do not fit models equipped with two catalytic converters or single
catalytic systems equipped with a catalytic converter that has a 3" diameter exit.
shortbeds.
PART
DESCRIPTION AND APPLICATION
REQD
▲
CAT-BACK PERF DUAL EXHAUST SYS
"A" 230-351
W/BLACK POWDER COAT BLUNT TIP F-SERIES 80-96 (1)
PRICE
Cat-Back Performance Dual Exhaust Systems
48-5510
48-5511
48-5512
$249.95*
CAT-BACK PERF DUAL EXHAUST SYS
"A" 230-351
W/STAINLESS STEEL BLUNT TIP F-SERIES 80-96 (1)
$339.95*
CAT-BACK PERF DUAL EXHAUST SYS
"A" 230-351
W/STAINLESS STEEL ANGLE TIP F-SERIES 80-96 (1)
$319.95*
48-5513
CAT-BACK PERF EXHAUST SYS
"B" 351 460
W/BLACK POWDER COAT BLUNT TIP F250
87-96 (1)
$259.95*
48-5514
CAT-BACK PERF EXHAUST SYS
"B" 351 460
W/STAINLESS STEEL ANGLE TIP F250
87-96 (1)
$339.95*
48-5568
CAT-BACK PERF EXHAUST SYSTEM
300 302 351
W/BLACK POWDER COAT BLUNT TIP BRONCO
87-96 (1)
$249.95*
CAT-BACK PERF EXHAUST SYSTEM
300 302 351
W/STAINLESS STEEL ANGLE TIP BRONCO
87-96 (1)
$339.95*
36-5559
36-5557
36-5557
RESONATOR TIP-BLACK POWDER
BLUNT TIP
REPLACEMENT FOR CAT-BACK SYSTEM
(2)
$34.95
36-5558
RESONATOR TIP-STAINLESS STEEL
BLUNT TIP
REPLACEMENT FOR CAT-BACK SYSTEM
(2)
$74.95
RESONATOR TIP-STAINLESS STEEL
ANGLE TIP
REPLACEMENT FOR CAT-BACK SYSTEM
(2)
$69.95
36-5559
Bronco Cat-Back Performance Dual Exhaust Systems
48-5567
replacement resonator tips
The 3-1/2" diameter resonator tips
replace the original muffler and give
your truck that deep performance
tone without being too loud.
Available in stainless steel angle tip
or black powder coat blunt tip.
resonator tips
Note: "A" Fits 351 with 2-1/4" outer diameter pipe at the rear of the catalytic
converter only.
"B" Fits 351 and 460 with 2-1/2" outer diameter pipe at the rear of the
catalytic converter only.
true Off road Dual 2-1/4" Exhaust Systems
Not legal for sale or use on
pollution controlled vehicles.
Performance turbo Dual Exhaust Systems
Turbo Exhaust Systems have 2-1/4" in and out flow mufflers to
reduce back pressure and give that great low exhaust tone you
expect from your truck.
48-5552
48-5500
DUAL EXHAUST SYSTEM
"A" 302 F-SERIES
REPLACEMENT TURBO MUFFLER
FITS 48-5552
80-91 (1)
(2)
$249.95*
$39.95
Performance Glass Pack Dual Exhaust Systems
Glass Pack Exhaust Systems have bullet shaped, straight through
glass packed mufflers to help reduce back pressure and give that
aggressive rumble you want.
48-5562
36-5493
DUAL GLASS PACK SYSTEM "A" 302 F-SERIES
REPLCMNT GLASS PACK MUFFLER FITS 48-5562
80-91 (1)
(2)
$219.95*
$34.95
Note: "A" Fits standard cab models with automatic transmission only.
These systems are
designed to mount
to your stock manifolds.
Dual systems run down the
passenger side between the drive
shaft and frame. Exhaust exits at
stock location behind rear wheels.
48-5552
turbo Mufflers ... reduce Noise without restricting Power
Turbo Mufflers are specially designed to reduce and control noise without excessively restricting power.
They are made from the finest quality materials and can be used as OE replacements as well as on
custom exhaust systems.
turbo Mufflers have a galvanized, double
wrapped muffler casing for maximum rust
protection. Louvered baffles eliminate
vibration and spun end caps provide a
gas tight seal. Reverse flow design allows
muffler to be inverted.
Part #
36-6030
36-6031
36-6032
36-6030
36-6031
36-6032
Inlet
2"
2-1/4"
2-1/2"
turbo Header Mufflers have
the same features as Turbo
Mufflers and they have a 3"
3-bolt flange to bolt-up to
most headers.
36-6040
36-6030
Outlet
2"
2-1/4"
2-1/2"
HEDMAN TURBO MUFFLER
HEDMAN TURBO MUFFLER
HEDMAN TURBO MUFFLER
www.LMC truCk .com
Order Your Catalogs & Parts Online
2" X 2"
2-1/4" X 2-1/4"
2-1/2" X 2-1/2"
$69.95
$69.95
$69.95
Part #
36-6040
36-6040
Inlet Flange
3" 3-bolt
Inlet
2-1/4"
Outlet
2-1/4"
HEDMAN TURBO HEADER MUFFLER
¿Habla Español? (855) 456-2288
2-1/4" X 2-1/4"
$74.95
(800) 562-8782
toll Free - uSA & Canada