HVLP Spray Equipment

Transcription

HVLP Spray Equipment
HVLP Turbine Spray Systems
HVLP Versus Other Spray Systems
High-Pressure Spraying
X 65% plus overspray
X Material wastage
X Health risk from overspray
HVLP Turbine Spraying
Percentage of Product Wasted
As A Function Of Type Of
Spray Equipment Used
x Virtually no overspray
x Substantial material savings
x Healthier work environment
oisy
ss N s
e
L
stem
o 75%
Up T Other Sy
Than
The Fuji-Spray® Q3 GOLD, Q4 GOLD, MiniMite-3 (Fine Woodworking Best Overall/
Value recipient) and MiniMite-4 spray systems are powered by high performance, 3-stage
or 4-stage workhorse turbine engines, and the new T-70 class non-bleeder spray
gun that is anything but ordinary. Aside from their superior spray performance with all
types of finishes, and a two year warranty, the GOLD series spray systems, through
their patented technology are up to 75% quieter than competitive systems, including.
Save up to 85-90% over conventional air spray systems in material consumption too.
The new Fuji Spray Semi-PRO 2™ HVLP Spray System has been added to meet the
growing demand by home hobbyists and DIY market. A 2-stage system that performs
like a 3-stage system of others. FUJI Spray Systems are perfect for spraying wood,
metal, plastic or canvas. Simply unsurpassed! The Q3 and Mini-Mite models, all, are
capable of running two guns simultaneously. Second gun and hose are optional.
NEW
6 Ft Flexible Whip Hose
Q3 GOLD
3-Stage
6 psi
110 CFM
Q4 GOLD
4-Stage
8 psi
138 CFM
MM3-T70
3-Stage
6 psi
110 CFM
MM4-T70
4-Stage
8 psi
138 CFM
SEMI-PRO2 2-Stage
4 psi
80 CFM
T-70 Spray Gun (with Cup Gun Assembly)
M-Spray Gun (with Cup Gun Assembly) [Semi-Pro2 ]
www. hoodfinishing. com
ACCESSORIES
ESP-050
60-4415
9001-4
9001-5
9001-6
CG-32
CP-34
91-049
25 ft Air Hose
Flexible 6 ft Whip Hose
1.4 mm Atomizing Set
1.8 mm Atomizing Set
2.2 mm Atomizing Set (for paints)
Cup Gun Assembly
Cup Gasket
Pressure Tube with Check Valve
1-800-229-0934
$69.95
$31.95
$69.95
$69.95
$69.95
$39.95
$2.95
$2.95
Page 21
HVLP & COMPRESSED AIR SPRAY GUN
LYNX-4™ HVLP GRAVITY FEED TYPE SPRAY GUN
Simply connect the LYNX™-4 HVLP spray gun
directly to your shop's air line and you are ready to
reap the benefits of a High Volume Low Pressure
spray system. Operating at standard air line pressures (40 psi), the LYNX™-4 HVLP gun creates less
than 10 psi of pressure at the tip while maintaining
a minimum of 65% transfer efficiency. No matter
what you are spraying, you are sure to save up to
50% in material consumption. LYNX™-4 HVLP Gun
is as easy to use as the high pressure gun you're
using now or accustomed to. Supplied with 1.4
mm atomizing set and a 600 ml polyethylene cup
with screw on cap. Larger cups and of aluminum
construction are also available as given below.
LYNX-4GF LYNX-4™ HVLP SPRAY GUN (SIPHON FEED)
Siphon feed version to the LYNX™--4 HVLP
gun. Simply connect the LYNX™-4 HVLP spray
gun directly to your shop's air line and you are
ready to reap the benefits of a High Volume Low
Pressure spray system. Operating at standard air
line pressures between 32 and 45 psi. No matter
what you are spraying, you are sure to save up to
50% in material consumption. Supplied with 1.5
mm atomizing set and an aluminum construction
quart cup as given below.
It requires only a 3 HP ordinary shop compressor
though a 5 HP compressor provides greater
efficiency.
Spray Gun with Cup Gun Assembly - Gravity Type
580-10058-GF
580-10086-GF
91641
91646
91644
1.5 mm Atomizing Set - Gravity Feed Gun
2.2 mm Atomizing Set - Gravity Feed Gun
600 ml Gravity Feed Plastic Cup w/Lid 600 ml Gravity Feed Aluminum Cup w/Lid
1000 ml Gravity Feed Aluminum Cup w/Lid
CONVENTIONAL COMPRESSED AIR SPRAY GUN
Economical, industrial quality, siphon type spray gun,
that yields a smooth, clean finish every time. An excellent
product for use with all sprayable coating and stains,
as well as contact cement.. Its standard fluid flow set
up sprays all modern finishes like a champ, including
all our HYDROCOTE® Finishes. Requires 10 cfm at 45
psi of pressure. Supplied with 1.8 mm atomizing set.
32520
Industrial Spray Gun
CONVENTIONAL GRAVITY FEED SPRAY GUN
Economical, light weight, industrial quality, gravity feed type
spray gun, that yields a smooth, clean finish every time.
An excellent product for use with all sprayable coating and
stains, as well as contact cement. Its standard fluid flow set
up sprays all finishes quite well, including HYDROCOTE®
brand Finishes. Requires 10 cfm at 45 psi of pressure. Supplied with 1.4 mm atomizing set. Includes 20 oz plastic cup.
32521
91647
Re-Engneered for
enhanced performance
LYNX-4 Spray Gun with Cup Gun Assembly CG-32
CP-39
Replacement Cup Gun Assembly
Replacement Cup Only
TSG-1000TM HVLP TURBINE SPRAY GUN
High performance HVLP gun for turbine
sprayers only. Equipped with 1.4 mm
atomizing set, this rugged, all metal bleeder
gun delivers high quality finishes at 85 to 90%
transfer efficiency. Great replacement for your
old worn out gun, or as a second gun. Excellent
for use wth all types of sprayable finishes.
Connects to any turbine sprayer having a 3/4"
hose coupling. Supplied complete, gun and cup
assembly. All metal, no breakable plastic parts.
TSG-1000
TSG-1000-2.2
CG-32
sembly
2.2 mm Atomizing Set
Replacement Cup Gun As-
2-1/2 GALLON PRESSURE POT
Superior quality pressure pot designed
for high production operation. Includes
an air regulator and gauge, and a safety
valve. Air hose and fluid hose are
optional. Heavy duty galvanized steel
construction for greater durability and
compatibility with water based finishes.
Easily adaptable to the above LYNX-4
Conversion Gun and the conventional
Industrial Spray Gun .
Gravity Feed Spray Gun
20 oz Gravity Feed Plastic Cup w/Lid
TOUCH UP SPRAY GUN W/CUP
Siphon type for pinpoint accuracy in touch
up shading, detailing, distressing, etc.
Requires 30-50 psi of pressure. Comes
complete with 8 oz cup.
32510
Page 22
www. hoodfinishing. com
32620
Pressure Pot
38825
15' Material Hose
38625
38650
25' Air Hose
50' Air Hose
DL-320
2 1/2 Gal Disposable Pressure Pot Liners
1-800-229-0934
20/pkg