A HIGH PERFORMANCE SURFBOARD BLANK - Foam E-Z

PATENTED TECHNOLOGY
A HIGH PERFORMANCE SURFBOARD BLANK
[email protected]
INCIDEblanks.com
310 225 6774
THE BRAIN
SURFBOARD BLANK TECHNOLOGY
Until now, the structure of a surfboard has been rooted in the wooden stringer.
As a board is shaped, the stringer is thinned down with each pass of the planer.
THIS ALTERS THE STRUCTURE OF THE BOARD.
A thick board has more structure, making the board stiffer in turns.
A thinner board has less structure making the board more flexible.
Instead of relying on a wooden stringer that is altered as the board is shaped,
INCIDE sandwiches the structure inside of the foam blank via 'THE BRAIN'.
1” - EPS foam
1” - EPS foam
( CROSS-SECTION OF AN INCIDE BLANK )
This carbon fiber part is pre-tuned prior to shaping allowing the board to be shaped without altering
the flex or integrity of the structure. With 'THE BRAIN', we are improving the classic wooden stringer,
now providing board builders the ability to approach their shaping in a new light, opening new doors
for design and processes in which boards are made.
[email protected]
INCIDEblanks.com
310 225 6774
ARBON
SURFBOARD BLANK TECHNOLOGY
5 x STRONGER than
2 x AS STIFF
1/3 THE WEIGHT
This amazing weight to strength ration
makes carbon fiber one of the most high
performance materials out there.
With INCIDE’s blank technology, the performance and
structure of the surfboard is fixed in carbon fiber.
Up until now people have only used carbon fiber in the
external shape of the board. This does not work for
a number of reasons, mainly cost and the inability to tune
your shape making it simply an expensive glass job.
Instead we use carbon to actually make a better board
by not only extending the performance life of your
board, but increasing the ability to
FINE TUNE THE FLEX.
[email protected]
INCIDEblanks.com
310 225 6774
FLEX
SURFBOARD BLANK TECHNOLOGY
Flex is best decribed as the way a board bends, then recoils as it comes back to static.
The faster the recoil, the more lively the board feels.
Feeling this response is what gives that magic board feeling.
The key to INCIDE's blanks is that we have the ability to control this flex independent from the design.
PUNKER PAT
[email protected]
INCIDEblanks.com
310 225 6774
SHAPE AT WILL
SURFBOARD BLANK TECHNOLOGY
WILL I PLANE INTO THE CARBON ‘BRAIN’?
Unlikely - the brain is suspended in a spot that is untouched by the Shaper 99% of the time.
WELL - WHAT IF I DO HIT IT?
Not a problem, as strong and durable as carbon is - it can be cut with normal household scissors
your planer will win and live to shape another rail.
WHERE IS THE ‘BRAIN’ LOCATED?
The bottom of the brain is flat - locate the center seem on the rail of the blank
All of the foam below that line, is ‘brain’-less - shape away // measure an inch
Down from the deck - it too is ‘brain’-less.
[email protected]
INCIDEblanks.com
310 225 6774
INCIDE 600 DM
LENGTH : 6’ 2.8” WIDTH : 22.2”
VOLUME : 60.1 I SURFACE : 8686.2 cm2
SURFACE DEV DECK : 10054.7 cm2 BOT : 9781.6 cm2
Width
Thickness
5’ 8.8”
5.9”
1.4”
9.8”
1.6”
12.4”
1.0”
5’ 2.8”
15.9”
1.0”
6’ 2.8”
5’ 11.8”
56.8”
18.4”
1.0”
SCOOP
4.9”
3.6”
2.8”
1.7”
0.9”
20.2”
1.0”
50.8”
22.2”
1.0”
37.7
24.0”
21.1”
1.0”
0.3”
18.0”
19.5”
1.0”
0.6”
12.0”
12.0”
17.4”
1.0”
1.0”
35.4”
6.0”
3.0”
0.0”
[email protected]
0.4”
14.4”
1.0”
12.5”
0.9”
10.2”
0.9”
INCIDEblanks.com
1.5”
1.8”
2.2”
310 225 6774
INCIDE 604 DM
LENGTH : 6’ 2.8” WIDTH : 22.2”
VOLUME : 59.6 I SURFACE : 8686.2 cm2
SURFACE DEV DECK : 10044.7 cm2 BOT : 9773.7 cm2
Width
Thickness
SCOOP
6’ 2.4”
1.4”
5’ 11.4”
1.6”
5’ 8.4”
1.0”
5’
5’2.4”
2.8”
1.0”
56.4”
50.4”
3.9”
2.9”
2.2”
1.3”
1.0”
0.8”
22.2”
1.0”
0.4”
37.4
35.2”
22.12”
1.0”
24.0”
1.0”
18.0”
0.6”
12.0”
12.0”
1.0”
1.0”
6.0”
1.0”
1.5”
3.0”
1.0”
1.8”
1.0”
2.2”
0.0”
[email protected]
1.0”
0.3”
INCIDEblanks.com
310 225 6774
INCIDE 602 CHUM
LENGTH : 6’ 2.4” WIDTH : 22.2”
VOLUME : 58.4 I SURFACE : 8640.5 cm2
SURFACE DEV DECK : 9969.6 cm2 BOT : 9704.3 cm2
Width
Thickness
5’ 8.4”
5.9”
1.4”
9.8”
1.6”
12.4”
0.9”
5’
5’2.4”
2.8”
16”
1”
6’ 2.4”
5’ 11.4”
56.4”
50.4”
SCOOP
3.9”
2.9”
2.2”
1.3”
18.5”
1.0”
0.75”
20.3”
0.9”
0.3”
37.4
35.2”
22.12”
1.0”
24.0”
21.1”
1.06”
0.25”
18.0”
19.7”
1.06”
0.6”
12.0”
12.0”
22.36”
1.0”
0.9”
6.0”
3.0”
0.0”
[email protected]
14.4”
0.9”
12.5”
0.9”
10.2”
0.9”
INCIDEblanks.com
1.25”
1.5”
1.75”
310 225 6774
INCIDE 602 RC
LENGTH : 6’ 2.8” WIDTH : 22.2”
VOLUME : 59.4 I SURFACE : 8686.2 cm2
SURFACE DEV DECK : 10037.7 cm2 BOT : 9768.0 cm2
Width
Thickness
SCOOP
5’ 8.8”
5.9”
1.4”
9.8”
1.6”
12.4”
1.0”
5’ 2.8”
16.0”
1.0”
1.7”
56.8”
18.4”
1.0”
0.9”
50.8”
20.2”
1.1”
0.5”
22.2”
1.0”
37.9”
24.0”
21.1”
1.0”
0.3”
18.0”
19.6”
1.0”
0.6”
12.0”
17.4”
1.0”
1.0”
6’ 2.8”
5’ 11.8”
4.9”
3.6”
2.8”
35.4”
6.0”
3.0”
0.0”
[email protected]
14.4”
1.0”
12.5”
1.0”
10.2”
1.0”
INCIDEblanks.com
1.4”
1.7”
2.0”
310 225 6774
INCIDE 603 HP
LENGTH : 6’ 2.8” WIDTH : 22.2”
VOLUME : 59.5 I SURFACE : 8686.2 CM2
SURFACE DEV DECK : 10041.9 CM2 BOT : 9771.4 CM2
Width
Thickness
5’ 8.8”
5’ 2.8”
16.0”
1.0”
1.7”
56.8”
18.4”
1.0”
0.9”
50.8”
20.2”
1.1”
0.4”
6’ 2.8”
5’ 11.8”
22.2”
1.0”
35.4”
4.9”
3.6”
2.8”
37.4”
24.0”
21.1”
1.0”
0.3”
18.0”
19.6”
1.0”
0.6”
12.0”
17.4”
1.0”
1.0”
6.0”
3.0”
14.4”
1.0”
12.5”
1.0”
10.2”
1.0”
0.0”
[email protected]
Scoop
5.9”
1.4”
9.8”
1.6”
12.4”
1.0”
INCIDEblanks.com
1.6”
1.8”
2.2”
310 225 6774
INCIDE 608 HP
LENGTH : 6’ 8.8” WIDTH : 22.2”
VOLUME : 63.5 I SURFACE : 9342.8 cm2
SURFACE DEV DECK : 10790.1 cm2 BOT : 10501.3 cm2
Width
Thickness
5’ 8.8”
5.9”
1.6”
9.6”
1.5”
12.1”
1.8”
5’ 2.8”
15.6”
0.9”
6’ 2.8”
5’ 11.8”
56.8”
SCOOP
4.9”
3.6”
2.8”
1.7”
18.0”
1.0”
0.9”
19.8”
1.0”
50.8”
0.4”
37.7
35.4”
22.2”
1.0”
24.0”
20.8”
1.0”
0.3”
18.0”
19.3”
1.0”
0.6”
12.0”
17.1”
1.0”
1.0”
6.0”
3.0”
0.0”
[email protected]
14.2”
1.0”
12.4”
1.0”
10.2”
1.0”
INCIDEblanks.com
1.5”
1.8”
2.2”
310 225 6774
INCIDE 609 HP
LENGTH : 6’ 8.3” WIDTH : 22.2”
VOLUME : 64.9 I SURFACE : 9342.8 cm2
SURFACE DEV DECK : 10824.3 cm2 BOT : 10528.8 cm2
Width
Thickness
SCOOP
6’ 8.3”
1.4”
6’ 5.3”
1.6”
6’ 2.3”
1.9”
5’
5’8.3”
2.8”
1.0”
5’ 2.3”
56.3”
3.9”
2.9”
2.2”
1.9”
1.0”
1.1”
1.0”
0.5”
34.4
38.0”
22.12”
1.0”
24.0”
1.0”
18.0”
0.8”
12.0”
12.0”
1.0”
1.3”
6.0”
1.0”
2.0”
3.0”
1.0”
2.3”
1.0”
2.8”
0.0”
[email protected]
1.0”
0.4”
INCIDEblanks.com
310 225 6774
PATENTED TECHNOLOGY
PUNKER PAT
MANUFACTURED AND DISTRIBUTED by
USBlanks
A HIGH PERFORMANCE SURFBOARD BLANK
[email protected]
INCIDEblanks.com
310 225 6774
and DISTRIBUTED
E
D
by
MA
USBlanks
[email protected]
INCIDEBLANKS.COM
310 225 6774
SURFBOARD BLANK TECHNOLOGY
With the large amount of stoke INCIDE’s blanks were recieving
it became clear we were going to need a bigger ship... A MUCH bigger ship.
We look forward to being able to fully service any order that may come
to fruition.
Hop on board - it’s going to be quite a journey.
[email protected]
INCIDEblanks.com
310 225 6774