A HIGH PERFORMANCE SURFBOARD BLANK

PATENTED TECHNOLOGY
A HIGH PERFORMANCE SURFBOARD BLANK
[email protected]
INCIDEblanks.com
310 225 6774
USBla
MAN
UFAC
TURE
D AN
nks
D DI
STRIB
UTED
by
WITH THE LARGE AMOUNT OF STOKE INCIDE’S BLANKS
WERE RECIEVING IT BECAME CLEAR WE WERE GOING
TO NEED A BIGGER SHIP... A MUCH BIGGER SHIP.
WE LOOK FORWARD TO BEING ABLE TO FULLY SERVICE
ANY ORDER THAT MAY COME TO FRUITION.
HOP ON BOARD - IT’S GOING TO BE QUITE A JOURNEY.
[email protected]
INCIDEblanks.com
310 225 6774
THE BRAIN
SURFBOARD BLANK TECHNOLOGY
Until now, the structure of a surfboard has been rooted in the wooden stringer.
As a board is shaped, the stringer is thinned down with each pass of the planer.
THIS ALTERS THE STRUCTURE OF THE BOARD.
A thick board has more structure, making the board stiffer in turns.
A thinner board has less structure making the board more flexible.
Instead of relying on a wooden stringer that is altered as the board is shaped,
INCIDE sandwiches the structure inside of the foam blank via 'THE BRAIN'.
1” - EPS foam
1” - EPS foam
( CROSS-SECTION OF AN INCIDE BLANK )
This carbon fiber part is pre-tuned prior to shaping allowing the board to be shaped without altering
the flex or integrity of the structure. With 'THE BRAIN', we are improving the classic wooden stringer,
now providing board builders the ability to approach their shaping in a new light, opening new doors
for design and processes in which boards are made.
[email protected]
INCIDEblanks.com
310 225 6774
ARBON
SURFBOARD BLANK TECHNOLOGY
5 x STRONGER than
2 x AS STIFF
1/3 THE WEIGHT
This amazing weight to strength ration
makes carbon fiber one of the most high
performance materials out there.
With INCIDE’s blank technology, the performance and
structure of the surfboard is fixed in carbon fiber.
Up until now people have only used carbon fiber in the
external shape of the board. This does not work for
a number of reasons, mainly cost and the inability to tune
your shape making it simply an expensive glass job.
Instead we use carbon to actually make a better board
by not only extending the performance life of your
board, but increasing the ability to
FINE TUNE THE FLEX.
[email protected]
INCIDEblanks.com
310 225 6774
FLEX
SURFBOARD BLANK TECHNOLOGY
Flex is best decribed as the way a board bends, then recoils as it comes back to static.
The faster the recoil, the more lively the board feels.
Feeling this response is what gives that magic board feeling.
The key to INCIDE's blanks is that we have the ability to control this flex independent from the design.
PUNKER PAT
[email protected]
INCIDEblanks.com
310 225 6774
SHAPE AT WILL
SURFBOARD BLANK TECHNOLOGY
WILL I PLANE INTO THE CARBON ‘BRAIN’?
Unlikely - the brain is suspended in a spot that is untouched by the Shaper 99% of the time.
WELL - WHAT IF I DO HIT IT?
Not a problem, as strong and durable as carbon is - it can be cut with normal household scissors
your planer will win and live to shape another rail.
WHERE IS THE ‘BRAIN’ LOCATED?
The bottom of the brain is flat - locate the center seem on the rail of the blank
All of the foam below that line, is ‘brain’-less - shape away // measure an inch
Down from the deck - it too is ‘brain’-less.
[email protected]
INCIDEblanks.com
310 225 6774
“
I've been riding Dan Mann's surfboards for about 10 years now.
center, they would spring load and release with a ton of torque. Dan took the idea of creating of
creating a better, more responsive surfboard very seriously and spent countless hours/years
developing the INCIDE technology.
Dan Mann is one of the most revolutionary shapers that barely anyone has heard about, due in
part to his cavalier attitude and complete focus on development, not "marketing."
Many of his board designs are now celebrated and emulated, with only a select group of craftsmen
knowing their true orgins. Some of his shapes have yet to catch on in popularity but are going to
be game changing.
I FEEL LUCKY TO HAVE BEEN A PART OF THE RIDE AND AM HONORED TO BE AN INCIDE TEST PILOT.
”
“Punker” Pat Towersey, Hurley
@PunkerPat
“
There is tremendous amounts of soul and intelligence that has gone into the fabrication of the
INCIDE technology. I feel as though this technology is light years ahead of anything I have ever
experienced in a surfboard.
ONCE YOU RIDE INCIDE, YOU WILL NEVER WANT TO RIDE ANYTHING ELSE!
”
Kristyan “Kish” Stjerne, Artist - Yogi - Surfer
@KristyanStjerne
[email protected]
INCIDEblanks.com
310 225 6774
LENGTH : 6’ 1/4”” WIDTH : 22.2”
VOLUME : 60.1 I SURFACE : 8686.2 cm2
SURFACE DEV DECK : 10054.7 cm2 BOT : 9781.6 cm2
INCIDE 6’0 DM
ROCKER
THICKNESS
4 9/10”
1 1/16”
3 3/5”
1 11/16”
2 4/5“
2 1/16”
1 7/10”
2 3/8”
WIDTH
5 1/2”
6’
12 1/4”
16 1/4”
12”
19”
9/10”
2 5/8”
2/5”
2 7/8”
18”
21”
24”
2 13/16”
37 7/10”
Center
3/10”
2 5/8
3/5”
2 3/8”
22 1/4”
24”
21 3/8”
18”
20”
1”
12”
17 7/8”
2”
1 1/2”
14 3/4”
6”
1 9/16”
2 1/5”
[email protected]
10 1/4”
INCIDEblanks.com
310 225 6774
LENGTH : 6’ 2 1/2” I WIDTH : 22”
VOLUME : 60 I SURFACE : 8686 cm2
SURFACE DEV DECK : 10054 cm2 BOT : 9781 cm2
INCIDE 6’2 CHUM
ROCKER
THICKNESS
3 9/10”
1 1/8”
2 9/10”
1 5/8”
2 4/5“
2 1/8”
1 7/10”
2 1/2”
WIDTH
5 1/4”
6’
11 5/8”
15 7/8”
12”
18 13/16”
18”
2 3/4”
9/10”
20 5/8”
2/5”
24”
3 3/16”
37 7/10”
Center
3/10”
3
3/5”
2 3/4”
22 3/8”
24”
21 9/16”
18”
20 3/8”
1”
2 1/2”
1 1/2”
2 1/8”
12”
18 5/8”
16”
6”
1 3/4”
2 1/5”
[email protected]
12”
INCIDEblanks.com
310 225 6774
LENGTH : 6’ 2 1/2” I WIDTH : 22.2”
VOLUME : 59.4 I SURFACE : 8686.2 cm2
SURFACE DEV DECK : 10037.7 cm2 BOT : 9768 cm2
INCIDE 6’2 RC
ROCKER
THICKNESS
4 9/10”
1 1/8”
3 3/5”
1 5/8”
2 4/5“
2 1/8”
1 7/10”
2 1/2”
WIDTH
5 1/4”
6’
11 5/8”
15 7/8”
12”
18 13/16”
18”
2 3/4”
9/10”
20 5/8”
1/2”
24”
3 3/16”
37 9/10”
Center
3/10”
3
3/5”
2 3/4”
22 3/8”
24”
21 9/16”
18”
20 3/8”
1”
2 1/2”
1 2/5”
2 1/8”
12”
18 5/8”
16”
6”
1 3/4”
2”
[email protected]
12”
INCIDEblanks.com
310 225 6774
LENGTH : 6’ 31/2” I WIDTH : 221/5”
VOLUME : 59 2/5 I SURFACE : 8686 1/5 cm2
SURFACE DEV DECK : 10037 7/10 cm2 BOT : 9768 cm2
INCIDE 6’3 HP
ROCKER
THICKNESS
4 9/10”
1 1/8”
3 3/5”
1 5/8”
2 4/5“
2 1/8”
1 7/10”
2 1/8”
WIDTH
5 1/4”
6’
11 5/8”
15 7/8”
12”
18 13/16”
9/10”
2 1/2”
2/5”
2 3/4”
18”
20 5/8”
24”
3 3/16”
37 2/5”
Center
3/10”
3
3/5”
2 3/4”
22 3/8”
24”
21 3/8”
18”
20 1/2”
1”
2 7/16”
1 2/5”
2 1/16”
12”
18 1/4”
15 1/2””
6”
1 5/8”
2 1/5”
[email protected]
11 1/2””
INCIDEblanks.com
310 225 6774
LENGTH : 6’ 41/4” I WIDTH : 221/5”
VOLUME : 59 2/5 I SURFACE : 8686 1/5 cm2
SURFACE DEV DECK : 10037 7/10 cm2 BOT : 9768 cm2
INCIDE 6’4 DM
ROCKER
THICKNESS
3 9/10”
1 1/8”
2 9/10”
1 5/8”
2 4/5“
2 1/8”
1 3/10”
2 1/2”
WIDTH
5 1/4”
6’
11 5/8”
15 7/8”
12”
18 13/16”
18”
20 5/8”
2 3/4”
4/5”
24”
3 3/16”
37 2/5”
Center
3/10”
2 15/16
3/5”
2 11/16”
22 3/8”
24”
21 3/16”
18”
19 7/8”
1”
2 3/8”
1 2/5”
2”
12”
17 7/8”
15”
6”
1 9/16”
2 1/5”
[email protected]
10 1/2”
INCIDEblanks.com
310 225 6774
LENGTH : 6’ 81/2” WIDTH : 221/5”
VOLUME : 601/10 I SURFACE : 8686 2/5 cm2
SURFACE DEV DECK : 100547/10 cm2 BOT : 97813/10 cm2
INCIDE 6’8 DM
ROCKER
THICKNESS
4 9/10”
7/8”
3 3/5”
1 3/8”
2 4/5“
1 7/8”
1 7/10”
2 5/16”
WIDTH
4”
6’
10 13/16”
15”
12”
17 15/16”
18”
2 11/16”
9/10”
20”
2/5”
24”
3 3/16”
37 7/10”
Center
3/10”
2 15/16”
3/5”
2 11/16”
22 5/16”
24”
21 1/4”
18”
20”
1”
2 7/16”
1 1/2”
2 1/16”
12”
18 3/16”
15 3/4”
6”
1 3/4”
2 1/5”
[email protected]
12
INCIDEblanks.com
310 225 6774
LENGTH : 6’ 91/4” I WIDTH : 221/5”
VOLUME : 64 9/10 I SURFACE : 9342 4/5 cm2
SURFACE DEV DECK : 10824 3/10 cm2 BOT : 10528 1/4 cm2
INCIDE 6’9 HP
ROCKER
THICKNESS
3 9/10”
7/8”
2 9/10”
1 3/8”
2 1/5“
1 7/8”
1 9/10”
2 5/16”
WIDTH
4”
6’
10 13/16”
15”
12”
17 15/16”
18”
20”
2 11/16”
11/10”
24”
3 3/16”
34 2/5”
Center
2/5”
2 13/16
4/5”
2 5/8”
22 5/16”
24”
21”
18”
19 3/4”
13/10”
2 5/16”
2”
2 1/16”
12”
17 3/4”
15 1/4”
6”
1 3/4”
2 4/5”
[email protected]
11 1/2”
INCIDEblanks.com
310 225 6774
PATENTED TECHNOLOGY
PUNKER PAT
USBlanks
MANUFACTURED AND DISTRIBUTED by
A HIGH PERFORMANCE SURFBOARD BLANK
[email protected]
INCIDEblanks.com
310 225 6774
USBla
MAN
UFAC
TURE
D AN
nks
D DI
STRIB
UTED
by
[email protected]
INCIDEBLANKS.COM
310 225 6774
[email protected]
INCIDEblanks.com
310 225 6774