Product Specification Sheet - Store Wall

T Wall Store Wall
Product Technical Overview Sheet
►►Store
Wall
Store Wall modules are positioned on the centre
line of the partition effectively “infilling” sections
of wall. As well as reducing cost this creates an
integrated aesthetic, and saves space by utilising
the footprint of the wall itself for storage.
Store Wall modules can be oriented all facing in
a single direction, or alternated to face in both
directions. Where the back face is presented
into an office or open plan space, this can be
manufactured with a whiteboard, pinboard or
other utility surface.
Full acoustic sealing is used around the perimeter
of the Store Wall modules to minimise potential
sound transmission.
►► Standard Finishes:
‘Mannex’ White Powdercoat Aluminium
‘Mannex’ Silver or Black
Natural Anodised
►► Eco Cert. :
►► Guarantee Period: 10 Years
►► Continuity of Supply Period: 15 Years
►► Lead Time: 4 - 6 Weeks
►► Design and Manufacture: New Zealand
Page 1 of 6
www.aspectfurniture.com
© Copyright Aspect Furniture Systems Ltd 2014
T Wall Store Wall
Product Technical Overview Sheet
►► Technical Drawing: Section View
105
400 - 600
105
►► Diagrams
Page 2 of 6
www.aspectfurniture.com
© Copyright Aspect Furniture Systems Ltd 2014
T Wall Function Wall
Product Technical Overview Sheet
►►Function
Wall
Function Wall is a system of clip-on panels
that integrate with T Wall, typically used where
increased privacy or additional functionality
is required. Function Wall can be tiled to suit
requirements with a custom t-edge utility channel
typically fitted to the upper edge of the tiles.
This houses a wide range of accessories from the
Logic and Logic Air Accessories ranges such as
paper trays, pen buckets, accessory trays, copy
holders.
►► Standard Finishes:
Fabric (Customer Specified)
Melteca
Polished Aluminium
►► Eco Cert. :
►► Guarantee Period: 10 Years
►► Continuity of Supply Period: 15 Years
►► Lead Time: 4 - 6 Weeks
►► Design and Manufacture: New Zealand
Page 3 of 6
www.aspectfurniture.com
© Copyright Aspect Furniture Systems Ltd 2014
T Wall Function Wall
Product Technical Overview Sheet
►► Technical Drawing: Section View
►► Diagrams
nom.
37.5mm
75mm
STD
Client Specified
450, 9
600, 1
125mm
Single, Partial Height
ST
STD
Single, Full Height
Client Specified
Mag
Whi
Pinb
infill
125mm
Dual, Partial Height
Magnetic Fabric
Melteca
Veneer
Whiteboard
Pinboard
Acoustic Board
Flat Wall
Adju
File
Draw
Pull
105mm
Page 4 of 6
Dual, Full Height
www.aspectfurniture.com
© Copyright Aspect Furniture Systems Ltd 2014
T Wall Glazed Partitions
Product Technical Overview Sheet
►►Glazed
Partitions
T Wall conveys a sense of openness through the
extensive use of glass with a minimum number of
posts.
Large format, frameless sliding glass doors allow
officed staff to minimise the barriers between
them and open plan staff.
Traditionally frameless glass systems have been
very expensive and relied on structural support
from the ceiling above. T Wall eliminates the need
for this through the introduction of a structural
transom, allowing greater modularity and
significant cost savings.
►► Standard Finishes:
Anodised Aluminium
‘Mannex’ White Powdercoat Aluminium
‘Mannex’ Black Powdercoat Aluminium
►► Eco Cert. :
►► Guarantee Period: 10 Years
►► Continuity of Supply Period: 15 Years
►► Lead Time: 4 - 6 Weeks
►► Design and Manufacture: New Zealand
Page 5 of 6
www.aspectfurniture.com
© Copyright Aspect Furniture Systems Ltd 2014
T Wall Glazed Partitions
Product Technical Overview Sheet
►► Technical Drawing: Standard Profiles
37.5mm
75mm
75mm
75mm SQ
75mm SQ
18mm
HEAD GLAZE 1:1
DOOR JAMB 1:1
POST 1:1
60mm
125mm
125mm
POST SPACERS 1:1
25mm
75mm
TRANSOM 1:1
Page 6 of 6
75mm
FLOOR GLAZE 1:1
www.aspectfurniture.com
SLIDING TRANSOM1:1
© Copyright Aspect Furniture Systems Ltd 2014