impact protection and dock equipment - Handle-It

Transcription

IMPACT PROTECTION
AND DOCK EQUIPMENT
www.handleitinc.com
®
Table of Contents
PROTECTION
EQUIPMENT
DOCK
ACCESSORIES
Guard Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
Truck Restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Rack Protectors
Fork Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Standard Rack Protectors . . . . . . . . . . . . . . . . . . . . . . . 4
Wheel Risers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Space Saving Rack Protectors . . . . . . . . . . . . . . . . . . . 5
Post Protectors
ADDITIONAL PRODUCT INFO . . . . . . . . . . 17
Standard Post Protectors . . . . . . . . . . . . . . . . . . . . . . . 6
Seismic Post Protectors . . . . . . . . . . . . . . . . . . . . . . . . 6
Snag-Less Post Protectors . . . . . . . . . . . . . . . . . . . . . . 6
Column Support Post Protectors . . . . . . . . . . . . . . . . . 6
Track Guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Bollards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Floor Mounted Barriers . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Build-A-Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DOCK
EQUIPMENT
Edge of Dock Leveler . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Aluminum Dock Plates . . . . . . . . . . . . . . . . . . . . . . . . . . 10
All Welded Aluminum Dock Boards . . . . . . . . . . . . . . . . 11
Aluminum Dock Boards with Steel Side Curbs . . . . . . . 11
Steel Truck Dock Boards
Steel Truck Dock Boards . . . . . . . . . . . . . . . . . . . . . . . 12
Steel Truck Dock Boards with Locking Pins . . . . . . . . 12
Steel Truck Combination Dock Boards . . . . . . . . . . . . 12
Steel Rail Dock Boards . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Pit Levelers
Mechanical Pit Levelers . . . . . . . . . . . . . . . . . . . . . . . 14
Hydraulic Pit Levelers . . . . . . . . . . . . . . . . . . . . . . . . . 14
Dock Lifts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SELECTION GUIDELINES
Dock Plates and Dock Boards. . . . . . . . . . . . . . . . . . . . . 18
Rail Board Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Pit Levelers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
POLICIES . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
PROTECTION EQUIPMENT
Guard Rails
FEATURES
·
·
·
·
Designed, tested and rated to withstand
10,000 lbs. at 4 M.P.H.
Flange nuts are welded inside columns at
each hole for ease of installation
Painted safety yellow for high visibility
Columns are mountable on all four sides
OPTIONS
·
·
·
·
·
·
Lift Out Adapter
Down Guard Adapter
45 Degree Angle Adapter
Hinged Gate Assembly
Triple Rail System
Custom Rail Lengths and Column Heights
Double Rail System
AREAS OF INSTALLATION
In-plant offices, electrical panels, building
columns, mechanical vertical lines, shipping
workstations, production workstations, walk
ways, charging stations, and mezzanines
Single Rail System
GUARD RAIL DIMENSIONS
Double Rail System
12"
43"
18.5"
10 Gauge
Single Rail System
12"
5" × 5"
6"
Column
Size
10" × 10"
Base Plate
Part
A
Rail
Length
GR-10
GR-9
GR-8
GR-7
GR-6
GR-5
GR-4
GR-3
GR-2
115"
103"
91"
79"
67"
55"
43"
31"
19"
B
Center to
Center of
Columns
120"
108"
96"
84"
72"
60"
48"
36"
24"
Note:
A
B
C
t Add 1" to dimensions B and C if Lift Out Adapter
or Down Guard Adapter are being used
t Add 1.5" to dimensions B and C if using
Hinge Option
2
C
Outside to
Outside of
Base Plates
130"
118"
106"
94"
82"
70"
58"
46"
34"
For more information visit www.handleitinc.com
®
ORDERING INFORMATION
Model Number
Description
Weight (lbs.)
Guard Rail
GR-10
GR-9
GR-8
GR-7
GR-6
GR-5
GR-4
GR-3
GR-2
10' Rail
9' Rail
8' Rail
7' Rail
6' Rail
5' Rail
4' Rail
3' Rail
2' Rail
74
67
60
55
46
41
32
25
18
Single Rail Column
Double Rail Column
Triple Rail Column
31
52
52
Lift-Out Adapter (Pair)
Down Guard Adapter
Angle Adapter
Hinged Gate Assembly
Single Rail Corner Column
Single Rail Offset Column
Double Rail Corner Column
Double Rail Offset Column
12
13
12
12
31
31
52
52
Guard Rail Columns
CS-1
CS-2
CS-3
Guard Rail Options
LOA
DGA
AA-45
RH-2
CSC-1
CSO-1
CSC-2
CSO-2
All assembly and ¾" anchoring hardware and caps included. Bolt holes located on all four sides of the column.
GUARD RAIL OPTIONS
Lift-Out Adapter
Hinged Gate Option
To access equipment or space behind
the guard rail system, Lift-Out Adapters
are available. These adapters use
slot assemblies on the columns to
allow the rails to be removed and
then dropped back into place.
Enables access to equipment or space
behind the guard rail system while rails
remain attached to the columns. Adds
convenience to a Guard Rail System.
Down Guard Adapter
COLUMN OPTIONS
Holds the bottom rail down to the
column base plates and closes the gap
between the bottom of the rail and
the floor. Provides low level protection,
especially against forklift forks.
45° Angle Option
Allows a guard rail system to closely
follow the contour of what is being
protected, and maximizes the open
floor space.
Standard Column (CS)
Offset Column (CSO)
Corner Column (CSC)
3
Rack Protectors
Standard Rack Protectors
Single Ended
Rack Protector
or (L)
FEATURES
·
·
·
Available in heavy duty (.4") and medium
duty (.25") thicknesses
Single or Double Ended in 42" or 48" lengths
OPTIONS
·
·
Model Number
Description
Weight (lbs.)
Medium Duty Left Hand 42" (46" OAL)
Medium Duty Right Hand 42" (46" OAL)
Medium Duty Left Hand 48" (50.5" OAL)
Medium Duty Right Hand 48" (50.5" OAL)
38
38
42
42
Heavy Duty Left Hand 42" (46" OAL)
Heavy Duty Right Hand 42” (46" OAL)
Heavy Duty 42" Extender
Heavy Duty Left Hand 48" (50.5" OAL)
Heavy Duty Right Hand 48" (50.5" OAL)
64
64
46
70
70
52
65
Medium Duty Rack Protectors
RP-42LH-MD
RP-42RH-MD
RP-48LH-MD
RP-48RH-MD
Heavy Duty Rack Protectors
RP-42LH-HD
RP-42RH-HD
RP-42EX-HD
RP-48LH-HD
RP-48RH-HD
RP-48EX-HD
RP-62EX-HD
Floor angle extensions
Custom heights, lengths, thickness,
and half pipe diameters available
AREA OF INSTALLATION
Double-Ended Heavy Duty Rack Protectors
Rack storage or shelving storage areas
RP-42-HD
RP-48-HD
Heavy Duty Double-Ended 42" (50" OAL)
Heavy Duty Double-Ended 48" (52.5" OAL)
82
88
4-Pack ¾" × 4¼" Wedge Anchors
1
Wedge Anchors
WA3-4 × 4.25-4
Suggested ¾" anchoring wedge bolts not included
DIMENSIONS
Right Hand RP
Left Hand RP
Double Ended RP
Extender
Top View
3"
12"
6.5"
10.5"
.85"
4
5"
1"
4"
®
Space-Saving Rack Protectors
NO MORE WASTED SPACE
The narrow profile of the protector takes up
less than 1" of aisle space.
5"
10"
Space Saving
Rack Protector
Standard
Rack Protector
UPRIGHT
UPRIGHT
Double Ended
FEATURES
·
·
·
·
Narrow profile and notched angles allow
for protectors to fit closely to rack ends and
minimize required floor space
Universal design maximizes rack bay storage
when used in the inside of racking
Single or Double Ended, in 42" or 48" lengths
Single Ended (L)
Model Number
OPTIONS
·
·
Floor angle extensions
Custom heights, lengths, thickness,
and widths available
AREA OF INSTALLATION
Rack storage or shelving storage areas where
space is limited
Description
Weight (lbs.)
IRP-42-HD (Double)
Heavy Duty Double End 42" (50" OAL)
87
IRP-42LH-HD
61
IRP-42RH-HD
Heavy Duty Right Hand 42" (46" OAL)
61
IRP-48-HD (Double)
Heavy Duty Double End 48" (56" OAL)
92
IRP-48LH-HD
66
IRP-48RH-HD
Heavy Duty Right Hand 48" (52" OAL)
66
Suggested ½" Wedge Anchors for Space-Saving Rack Protectors not included.
Suggested ¾" Wedge Anchors for Extenders not included.
DIMENSIONS
Right Hand SSRP
Extender
Double Ended SSRP
Left Hand SSRP
Top View
5"
.4"
3"
7"
1"
6.5"
4"
12"
5
Post Protectors
AREAS OF INSTALLATION: Rack storage, shelving storage, conveyor
systems, and mezzanines
Standard Post Protectors
FEATURES
·
·
·
·
DIMENSIONS
V-shaped nose diverts impact away
from rack column
Made of ¼" thick steel material in
standard heights of 12", 18" or 24"
Clear inside dimension of 4.5", 6"
or 8.5" are standard
Painted safety yellow for high
visibility
6.125"
4.5"
.25"
4.5" Wide Post Protector
8.5" Wide Post Protector
4.5"–.85"
Model Number
"81–2"
P12
P18
P24
P12-6
P18-6
P24-6
P12-8
P18-8
P24-8
OPTIONS
Custom heights and widths available
Description
Weight (lbs.)
12" High Post Protectors
12" High Post Protector – 6" ID
12" High Post Protector – 8.5" ID
10
15
19
13
19
23
15
22
28
Suggested ½" anchoring wedge bolts not included
Corner Column Protector
FEATURES
·
·
·
DIMENSIONS
Made of ¼" thick steel material
in standard height of 24"
Clear inside dimension of 4.25"
visibility
2"
.25"
.75"
4.25"
.75"
Corner Column
Protector
"8
OPTIONS
4.25"
.25"
.75"
Custom heights and widths
available
2"
.75"
6.41"
3 × .688
"8
Model Number
Description
Weight (lbs.)
CCP12
CCP18
CCP24
CCP36
12" High Corner Column Protector
10
14
17
26
Suggested ½" anchoring wedge bolts not included. Bracket hardware included
Upright Support Protector
FEATURES
·
·
·
DIMENSIONS
Floor anchoring point and universal
column mounting pattern
V-shaped protector around
mounting anchor
4.5"
.18"8
OPTIONS
Custom heights and widths available
3.125"
Upright Support
Protector
Model
Number
SP24
Description
24" High Bolt-on Column Support
Weight
(lbs.)
8
Suggested ½" anchoring wedge bolt and connecting hardware not included
®
Track Guards
FEATURES
·
·
·
Tapered top edge eliminates pinch point
Floor and wall mounting surfaces for
increasing impact strength
Made of ¼" thick steel in 48" height
standard
3.5"
2.5"
4.625"
R .5" TYP
6.75"
OPTIONS
Custom heights available
3.5"
Overhead doors or loading dock areas
1.5"
1"
.25"
6.5"
8.625"
Model Number
Description
Weight (lbs.)
TG-48LH
TG-48RH
48" High Left Track Guard
48" High Right Track Guard
49
49
Track Guard
Suggested ½" floor anchoring wedge bolts included
Bollards
FEATURES
·
·
·
·
Made of schedule 40 steel pipe in 4" and 6" diameter and standard height of 42"
Standard steel cap cover included
10" × 10" base plate for surface mounting
OPTIONS
Custom heights available
Building columns, self standing equipment, parking areas, mezzanines, loading docks,
areas that need protection but are limited in space
Model Number
BO-4-24
BO-4-36
BO-4-42
BO-6-42
Description
24" High 4" Diameter Bollard
Weight (lbs.)
46
53
58
70
Bollard
(42" height pictured)
Suggested ¾" anchoring wedge bolts included
7
Floor Mounted Barriers
Floor Mounted Barrier (Front)
FEATURES
·
·
Constructed of sturdy 7 gauge steel,
formed into 12" tall × 6" deep barriers
Side gussets on all units and support
gussets on lengths 6' – 10'
Anchor bolts and connecting hardware
included for each section
Model
Number
Description
Overall
Height (in.)
Overall
Length (in.)
No. of
Gussets
Weight
(lbs.)
CG-3
3' Long Barrier
12"
36"
2
44
CG-4
4' Long Barrier
12"
48"
2
56
CG-5
5' Long Barrier
12"
60"
2
67
CG-6
6' Long Barrier
12"
72"
5
82
CG-7
7' Long Barrier
12"
84"
5
93
CG-8
8' Long Barrier
12"
96"
5
105
OPTIONS
CG-9
9' Long Barrier
12"
108"
5
115
·
CG-10
10' Long Barrier
12"
120"
5
128
CG-R
5' Long Right 45° Barrier
12"
60"
2
68
CG-L
5' Long Left 45° Barrier
12"
60"
2
68
CG-OC
45° Outside Corner Adapter
12"
N/A
N/A
9
CG-IC
45° Inside Corner Adapter
12"
N/A
N/A
6
·
·
·
45 degree, Inside Corner and Outside
Corners available
5' sections available with built-in 45° angle
DIMENSIONS
Suggested ½" anchoring wedge bolts and connecting hardware included
lanoitdArpouStestuG
nohegtnl5'dnagenorl
FLOOR MOUNTED BARRIER OPTIONS
1" 3"
12"
36"–120"
Outside Corner Adapter
6"
Inside Corner Adapter
90° Installation
Conveyor systems, machinery, production lines, self standing
equipment, mezzanines, and rack storage
®
Build-A-Rail
Side-by-side
e-by-side joinable units
Single rail with
extension
Stac
FEATURES
·
·
·
·
·
4 rail lengths available (4', 6', 8', 10')
Greater impact resistance than standard
guard rail. Tested impact of 10,000 lbs. at
4 M.P.H., resulted in 75% less deflection
Modular design allows rails to be stacked
Black plastic top and end caps included
with rails
visibility
OPTIONS
·
·
·
Collar Connectors
90° Degree Corner Collar Connectors
Custom lengths
Model
Number
Description
Overall
Overall
Height (in.) Length (in.)
Includes
Weight
(lbs.)
BR-4
4' Build-A-Rail Guard Rails
19
48
4 End/Top Caps
57
BR-6
19
72
4 End/Top Caps
72
BR-8
19
96
4 End/Top Caps
86
BR-10
19
120
4 End/Top Caps
100
BR-BASE
Modular Build-A-Rail Base Units
85⁄5⁄8"
10
N/A
23
WA3-4 × 4.25-4
4-Pack ¾" × 4¼" Wedge Anchors
N/A
4¾"
4 Wedge Anchors
1
BR-CC
Build-A-Rail Collar Connector
3½"
9
N/A
9
BR-CCC
Build-A-Rail Corner Collar Connector
3 7⁄8"
13¾"
N/A
24
BR-LEG
Build-A-Rail Leg Extension
19"
N/A
N/A
14
Suggested ¾" anchoring wedge bolts not included
DIMENSIONS
10"
48"–120"
1" (Visible collar length)
Collar Connector
Corner Collar Connector
20"
In plant offices, walk ways, storage areas,
shipping workstations, production
workstations, and machinery
34"–106"
10"
32"
4"
8"
4"
Height with Leg Extensions
9
DOCK EQUIPMENT
Edge of Dock Leveler
FEATURES
·
·
·
Deck and lip plate constructed of 55,000 lb
minimum-yield safety tread plate
Fully enclosed hinge pin supported by hinge
tubes with grease fittings
Full 5" above and below dock working range
OPTIONS
·
·
17" lip for refrigerated applications available
Approach plates for installation
Model
Lip
Number
Length
20,000 lbs. Capacity
Loading docks
H-LL2066
H-LL2072
H-LL2078
Edge-of-Dock Accessories
Model
Number
Details
Useable
Width
Overall
Width
Span
Weight
(lbs.)
15"
15"
15"
66"
72"
78"
102"
108"
114"
27 ¾"
27 ¾"
27 ¾"
489
534
579
15"
15"
15"
66"
72"
78"
102"
108"
114"
27 ¾"
27 ¾"
27 ¾"
540
586
633
15"
15"
15"
66"
72"
78"
102"
108"
114"
27 ¾"
27 ¾"
27 ¾"
550
596
625
Weight
(lbs.)
H-AP1296
12" wide × 96" long approach plate
90
H-AP12120
12" wide × 120" long approach plate
113
H-LL2566
H-LL2572
H-LL2578
H-LL3066
H-LL3072
H-LL3078
Aluminum Dock Plates
Aluminum Dock Plate
Front View
iew
FEATURES
·
·
·
·
·
Standard widths from 30" to 72"
Standard lengths from 24" to 60"
Handles are provided for easy lifting and moving
Beveled edges for easy entry and exit
Custom sizes available on special order
Model
Size
Height
Number
Width
Length
Difference
Medium Duty Dock Plates - 3/8" thick Aluminum Plate
AP-M3636
AP-M4836
AP-M4848
AP-M4860
36"
36"
48"
60"
5"
5"
7"
10"
2,500
3,500
2,600
1,800
68
83
107
132
5"
7"
5,300
3,800
104
137
Heavy Duty Dock Plates - 1/2" thick Aluminum Plate
AP-H4836
AP-H4848
10
36"
48"
48"
48"
Capacity (lbs.) Weight (lbs.)
48"
48"
36"
48"
®
Aluminum Dock Boards
All Welded Aluminum Dock Boards
Model
Size
Height
Capacity
Number
Width Length
Difference
(lbs.)
Light Duty Dock Boards - 5/16" thick Aluminum Plate
AB-L4836
AB-L4848
48"
48"
36"
48"
5"
7"
Weight
(lbs.)
7,000
7,000
80
107
10,000
10,000
10,000
113
151
188
14,000
14,000
14,000
120
160
200
Medium Duty Dock Boards - 3/8" thick Aluminum Plate
AB-M6036
AB-M6048
AB-M6060
60"
60"
60"
36"
48"
60"
5"
7"
9"
Heavy Duty Dock Boards - 3/8" thick Aluminum Plate
AB-H6036
AB-H6048
AB-H6060
FEATURES
·
·
·
·
·
·
·
60"
60"
60"
36"
48"
60"
5"
7"
9"
Extra Heavy Duty Dock Boards - 1/2" thick Aluminum Plate
Capacities from 7,000 lbs. to 17,000 lbs.
Standard widths from 48" to 72"
Standard lengths from 36" to 72"
Lifting chains are available for easy lifting and moving
Bolted locking legs can be reversed for refrigeration
truck applications
Beveled edges for easy entry and exit
AB-X6048
AB-X6060
AB-X7260
60"
60"
72"
48"
60"
60"
7"
9"
9"
17,000
17,000
15,000
195
244
279
Options
Model
Number
60C
72C
LH
Details
Weight
(lbs.)
60" Lifting Chain
72" Lifting Chain
40
44
20
Lifting Handles (Pair)
Aluminum Dock Boards with Steel Side Curbs
FEATURES
·
·
·
·
·
·
·
Bolted locking legs can be reversed for refrigeration truck
applications
Aluminum diamond plate used for positive traction and safety
Lightweight aluminum makes for easy portability
The resilience of aluminum is combined with the durability and
strength of steel
Beveled edges for easy loading and unloading
Options include lifting chains, hooks, curb mounts, and
hardware
Model
Number
Size
Width
Length
Height
Difference
Capacity
(lbs.)
Weight
(lbs.)
Medium Duty Dock Boards - 3/8" thick Aluminum Plate
ABS-M6036
ABS-M6048
ABS-M6060
60"
60"
60"
36"
48"
60"
5"
7"
9"
10,000
10,000
10,000
130
170
210
15,000
15,000
15,000
210
255
295
Options
Model
Number
60C
72C
Details
Capacity
(lbs.)
Weight
(lbs.)
60" Lifting Chain
72" Lifting Chain
6,200
4,300
40
82
Heavy Duty Dock Boards - 1/2" thick Aluminum Plate
ABS-H6048
ABS-H6060
ABS-H6072
60"
60"
60"
48"
60"
72"
7"
9"
11"
See page 17 for
additional sizes.
11
DOCK EQUIPMENT
Steel Truck Dock Boards
Standard Steel Truck Dock Boards
FEATURES
·
·
·
Safety curbs to protect runoffs
Diamond plate is used for positive
traction and safety
Beveled edges for easy loading
and unloading
Model Number
10STBL-6036
10STBL-6048
10STBL-6060
·
·
·
Steel locking legs and 11" lip
secure positioning of board
Lift chains are included
for portability
Economical and durable
Width
Size
Length
Height Difference
With Fork Lift
Weight
(lbs.)
60"
60"
60"
36"
48"
60"
5"
7"
9"
240
395
480
Steel Truck Board
with Locking Legs and Chains
Steel Truck Dock Boards with Locking Pins
FEATURES
·
·
·
·
Locking pins allow variable
positioning conditions to be
met with safety in mind
and unloading
Lift loops are standard for safe,
easy placement
Diamond plate is used for
positive traction and safety
Model
Number
Size
Width Length
Ht. Diff.
Weight
W/Fork Lift (lbs.)
15STB-6048
60"
48"
7"
455
15STB-6060
60"
60"
9"
565
15STB-6072
60"
72"
11"
645
20STB-6048
60"
48"
7"
505
20STB-6060
60"
60"
9"
620
20STB-6072
60"
72"
11"
715
Steel Truck Board
with Locking Pins and Lift Loops
Steel Truck Combination Dock Boards
FEATURES
·
·
Safely handles trucks that park at a
slight angle to the dock or simply
cannot park tight against the dock
Locking pins allow variable
positioning conditions to be
met with safety in mind
Model Number
·
·
Size
Width Length
and unloading
Diamond plate is used for positive
traction and safety
Height Difference
with Fork Lift
Weight
(lbs.)
Steel Truck Combination Board
15SC-6060
60"
60"
9"
565
15SC-6072
60"
72"
11"
645
15SC-7260
72"
60"
9"
640
15SC-7272
72"
72"
11"
735
20SC-6060
60"
60"
9"
620
20SC-6072
60"
72"
11"
715
20SC-7260
72"
60"
9"
730
20SC-7272
72"
72"
11"
825
12
See page 17 for additional
widths, lengths, and
capacities of Steel Truck
Dock Boards
®
Steel Rail Dock Boards
FEATURES
·
·
·
·
·
·
·
·
·
·
·
·
Built to your specifications
Provides a firm, solid bridge between railcar and dock
Constructed from high strength steel for durability
Capacities from 15,000 lbs. up to 100,000 lbs.
(Usual capacities of 25,000 lbs. and 40,000 lbs.)
Widths from 70" to 114" plus additional flare as
desired (Usual widths of 70", 82", 92" and 114")
Lengths from 32" to 84"—depending
upon application
Lift loops are standard for safe and easy
placement by forklifts
Safety side curbs reduce risk of forklift runoff
Beveled edges for easy loading and unloading
Diamond plate is for positive traction and safety
Welded box understructure design for strength
and security
Automatic space lock system for secure locking of
board in position
DIMENSIONS
HELPFUL HINT: To calculate
the size of the steel rail
board, please refer to the
worksheet on page 19.
13
DOCK EQUIPMENT
Pit Levelers
Mechanical Pit Levelers
FEATURES
·
·
·
·
·
·
·
·
·
·
Operating range 12" above and 12" below dock level
Solid steel “C” channel deck support—provides greater
resistance to elastic bending moments than other
industry designs
Positive adjustable hold-down device allows up and down
float when in service
High strength 55,000 lb. minimum yield steel deck and lip
Continuous hinge design with grease fittings provide for
long life
Direct extension spring counter-balance system with
no moving parts
Fully mechanical, single-handed pull-chain
operation—no lifting or straining
Dual cross traffic safety legs
Two heavy duty bumpers, a maintenance strut
and working range toe guards are standard
Standard capacities available to 45,000 lbs.
dynamic capacity
For Pit Leveler options, see page 17.
Mechanical
Pit Leveler
Model Number
Overall Width
Overall Length
Weight (lbs.)
6'
6'
6'
6' 6"
6' 6"
7'
7'
7'
6'
8'
10'
6'
8'
6'
8'
10'
1,390
1,580
2,170
1,750
2,020
1,510
1,810
2,675
6'
6'
6'
6' 6"
6' 6"
7'
7'
7'
6'
8'
10'
6'
8'
6'
8'
10'
1,566
1,695
2,455
1,795
2,225
1,854
2,289
2,739
Overall Width
Overall Length
Weight (lbs.)
6'
6'
6'
6' 6"
6' 6"
7'
7'
7'
6'
8'
10'
6'
8'
6'
8'
10'
1,605
1,785
2,012
1,672
1,860
1,690
2,114
2,124
6'
6'
6'
6' 6"
6' 6"
7'
7'
7'
6'
8'
10'
6'
8'
6'
8'
10'
1,658
1,940
2,061
1,707
2,021
1,755
2,172
2,170
H-MD600625
H-MD600825
H-MD601025
H-MD650625
H-MD650825
H-MD700625
H-MD700825
H-MD701025
H-MD600635
H-MD600835
H-MD601035
H-MD650635
H-MD650835
H-MD700635
H-MD700835
H-MD701035
Hydraulic Pit Levelers
FEATURES
·
·
·
·
·
·
·
·
·
·
Operating range 12" above and 12" below dock level
Solid steel “C” channel deck support—provides greater
resistance to elastic bending moments than other
industry designs
Unique base frame support struts make this leveler the
strongest and safest in the industry
Power operation in single phase (115 to 230 volts)
or three phase (208 to 460 volts)
Standard capacities available to 45,000 lbs.
dynamic capacity
Continuous hinge design with grease fittings provide
for long life
Lip keepers serve as night locks for safety and provide
safe cross-traffic support
Two heavy duty bumpers, a maintenance strut and
working range toe guards are standard
Inline safety stop guards against free-fall in the event
of premature truck departure
High strength 55,000 lb. minimum yield steel deck and lip
For Pit Leveler options, see page 17.
14
Hydraulic
Pit Lev
Model Number
H-HD600625
H-HD600825
H-HD601025
H-HD650625
H-HD650825
H-HD700625
H-HD700825
H-HD701025
H-HD600635
H-HD600835
H-HD601035
H-HD650635
H-HD650835
H-HD700635
H-HD700835
H-HD701035
®
Dock Lifts
FEATURES
·
·
·
·
·
·
·
·
68" × 18" split entry plate complete with lifting chains
Checkered tread plate platform surface
Up travel limit switch is standard on all dock lifts
Push button control
Removable guard rails are included on all dock lifts
Lifting lugs make initial placement much more convenient
Standard power packs to 10 H.P. depending on size and capacity
A maintenance strut is provided with all dock lifts to facilitate
safe servicing
OPTIONS
·
·
·
Optional horsepower motors available
Electric trip bars, four sides of platform, weatherproof
For more options, see page 17
Model
Number
Capacity
(lbs.)
Lowered
Height
Raised
Height
Dock Li
Standard
Platform W × L
Split Entry
Plate W × L
Base Size
Standard
H.P.
Standard
Power
Appr. Rise
Time (Sec.)
Weight
(lbs.)
Loading Dock Series - 72" × 96" Platform
LD5-7296
5,000
9"
68"
72" × 96"
68" × 18"
67" × 92"
1
115/1/60
100
2,280
LD6-7296
6,000
10"
69"
72" × 96"
68" × 18"
67" × 92"
1
115/1/60
120
2,400
LD8-7296
8,000
14"
73"
72" × 96"
68" × 18"
67" × 93"
3
220-575/3 phase
55
3,250
LD10-7296
10,000
14"
73"
72" × 96"
68" × 18"
67" × 93"
3
220-575/3 phase
70
3,800
LD5-72120
5,000
9"
68"
72" × 120"
68" × 18"
67" × 92"
1
115/1/60
100
2,400
LD6-72120
6,000
10"
69"
72" × 120"
68" × 18"
67" × 92"
1
115/1/60
120
2,500
LD8-72120
8,000
14"
73"
72" × 120"
68" × 18"
67" × 93"
3
220-575/3 phase
55
3,400
LD10-72120
10,000
14"
73"
72" × 120"
68" × 18"
67" × 93"
3
220-575/3 phase
70
4,000
73"
72" × 144"
68" × 18"
68" × 138"
5
220-575/3 phase
54
5,800
LD12-72144
12,000
14"
LD5-9696
5,000
9"
68"
96" × 96"
68" × 18"
68" × 93"
1
115/1/60
100
2,500
LD6-9696
6,000
10"
69"
96" × 96"
68" × 18"
68" × 93"
1
115/1/60
120
2,600
LD8-9696
8,000
14"
73"
96" × 96"
68" × 18"
68" × 93"
3
220-575/3 phase
55
3,370
LD10-9696
10,000
14"
73"
96" × 96"
68" × 18"
68" × 93"
3
220-575/3 phase
70
3,800
LD5-96120
5,000
9"
68"
96" × 120"
68" × 18"
68" × 93"
1
115/1/60
100
2,680
LD6-96120
6,000
10"
69"
96" × 120"
68" × 18"
68" × 93"
1
115/1/60
120
2,900
LD8-96120
8,000
14"
73"
96" × 120"
68" × 18"
68" × 93"
3
220-575/3 phase
55
3,815
LD10-96120
10,000
14"
73"
96" × 120"
68" × 18"
68" × 93"
3
220-575/3 phase
70
4,200
73"
96" × 144"
68" × 18"
89" × 138"
5
220-575/3 phase
54
6,200
LD12-96144
12,000
14"
DID YOU KNOW?
Dock Lifts are also featured
in our Ergonomics Catalog.
Download our catalog at
www.handleitinc.com
15
DOCK ACCESSORIES
Truck Restraints
Manual Truck Restraint
FEATURES
·
·
·
Semi-automatic unit provides in excess
of 50,000 lbs. restraining force
Non-impact operation—captures and
holds all legal I.C.C. bars—floats up and
down with trailer action
Exclusive pivoting hook allows for
debris or snow removal to within 4"
of dock face—low maintenance
Model Number
·
·
·
·
Complete inside/outside sign
package included
Approximately one hour installation
time using bolt hole pattern designed
for optimal holding force
Wide 12" to 30" vertical operating range
Optional manual light package
available
Signs
Lights
Weight (lbs.)
H-MVR-S
YES
NO
180
H-MVR-SL
YES
YES
200
Mechanical
Truck Restraint
Electric Truck Restraint
FEATURES
·
·
·
·
·
Automatic push button control for ease
of operation
Operates on fully enclosed 115 volt
single phase motor
Non-impact design compensates for
ICC bar position over a wide 12" to 30"
operating range
Automatic operation provides in excess
of 50,000 lbs.
Restraining force while positive contact
hook floats up or down with truck action
·
·
·
Includes complete inside/outside
visual communication package for
safe operation
Bolt hole pattern for ground and wall
mount installation provides maximum
strength and holding force
Operating system is self-contained
and fully enclosed for protection from
debris and the elements—periodic
chain lubrication is the only
maintenance required
Electric
Truck Restrai
Model Number
Signs
Lights
Weight (lbs.)
YES
YES
315
H-EVR-SL
Fork Extensions
Model
Number
Fork Extensions
FEATURES
·
·
·
16
Permits lifting long and large items
with a fork truck
Welded retainer keeps extension on
forks when in use
Fits forks up to 2 inches in thickness
·
·
·
Extensions for shaft mounted forks
available on special order
Other sizes available on special order
Extend forks up to 1½ times
original length
Length
Min. Fork
Length
Fork
Width
Weight
(lbs.)
FE-4-60
60"
40"
4"
47
FE-4-72
72"
48"
4"
60
FE-4-84
84"
56"
4"
65
FE-4-96
96"
64"
4"
75
FE-5-60
60"
40"
5"
55
FE-5-72
72"
48"
5"
65
FE-5-84
84"
56"
5"
73
FE-5-96
96"
64"
5"
88
FE-6-72
72"
48”
6"
68
®
Wheel Risers
FEATURES
·
·
·
·
·
Portable wheel risers raise vehicles closer
to dock height for efficient loading
Cost-effective solution to high docks and
low trailers
Beveled entry edge for easy entry and exit and
protects tires from damage
Select height by adding 2" to height of dock
from ground and subtract truck bed height
Select overall length based upon the ramp
angle that your loaded vehicles can negotiate
easily. (For single axle trucks use top length of 30".
For tandem axle trucks use top length of 84".)
Lighter duty Aluminum Wheel Risers available.
Visit www.handleitinc.com for more details.
Steel
Model Number
Height
Width
Overall
Length
Level
Length
Incline
Length
Weight
(lbs.)
Steel Wheel Risers - 40,000 lbs. capacity per pair
SWR24-6-48
6"
24"
48"
30"
18"
396
SWR24-6-102
6"
24"
102"
84"
18"
780
SWR24-8-54
8"
24"
54"
30"
25"
502
SWR24-8-108
8"
24"
108"
84"
25"
936
SWR24-10-60
10"
24"
60"
30"
32"
640
SWR24-10-114
10"
24"
114"
84"
32"
1124
SWR24-12-66
12"
24"
66"
30"
38"
772
SWR24-12-120
12"
24"
120"
84"
38"
1288
Additional Product Information and Capabilities
Aluminum Dock Plates (pg 10)
Steel Truck Combo Dock Boards w/ Locking Pins
Dock Lift Options (pg 15)
·
·
·
·
·
·
·
Widths from 30" to 72"
Lengths from 24" to 72"
Lengths from 48” to 96”
All-Welded Aluminum Dock Boards (pg 11)
Ramps
·
·
·
·
Pit Levelers (pg 14)
Aluminum Dock Boards w/ Steel Side Curbs (pg 11)
·
·
·
·
·
Steel Truck Dock Boards (pg 12)
·
·
·
Steel Truck Dock Boards w/ Locking Pins (pg 12)
·
·
·
We offer Aluminum Walk Ramps, Aluminum
Curb Ramps and Yard Ramps.
·
·
·
Mechanical Leveler Capacities from 25,000 lbs.
to 60,000 lbs.
Hydraulic Leveler Capacities from 25,000 lbs. to
80,000 lbs.
Air Operated Pit Levelers also available
208/220/460/575 Volt - 3 Phase Power Packs
available
Options include:
· Lip sizes (18" and 20")
· Telescopic Toe Guards
· Easy Pour-In Pans
· Curb Angles
· Mechanical Below Dock (Hydraulic)
·
·
·
·
·
·
·
Hydraulic hose and electric cable available
in lengths over 15'
Wall bracket for power pack mounting
(for 1, 3, and 5 hp.)
Mechanical pop-up stop, 6" wide × 68" long
Chains with snap hooks, per end
Tapered toe guards, 8" wide
1-phase power to 3-phase power
horsepower options from 1-hp to 10-hp
Split entry plates over 32" long
GSA Products Available
See Our Full Line of Scissor Lifts
and other Material Handling
Items in our Ergonomic
Products Catalog
17
Dock Plate and Dock Board Selection Guide
Dock Plate and
Dock Board Sizing
Dock board and dock plate width is
determined by the size of equipment
used to load and unload and the width of
the largest load. When in doubt, choose
the wider board or plate to ensure safer
operation. Side curbs reduce the useable
width of boards and must be considered
in choosing the correct width.
Dock board and dock plate length is
determined by the desired maximum
slope of the ramp into and out of the
truck from the dock. Each type of
equipment used has characteristics
to consider relative to the maximum
desired slope:
Determining Dock Board or Dock Plate
Consult the table below to determine the correct truck dock board or dock plate and
correct capacity to use based upon the equipment to be used in loading and unloading.
Dock Board and Dock Plate Selection
Equipment Used
Type of Board or Plate
Foot traffic, hand truck
or pallet truck
Aluminum Plate or Aluminum
Board with Side Curbs
(Operator, Equipment + Load) × 2
Four–wheeled forklift or
powered walkie pallet truck
Aluminum Board with Side Curbs
or any Steel Truck Board
(Locking Leg, 2-pin or 4-Pin)
Fork Lift Capacity × 3
Three–wheeled forklift
Any Steel Truck Board
(Locking Leg, 2-Pin or 4-Pin)
Fork Lift Capacity × 4.5
Choosing Truck Dock Board and Dock Plate Size
Equipment Used
Hand Pallet Trucks:
Max. Slope: 6%
Electric Fork Trucks:
Max. Slope: 10%
Gas Fork Trucks:
Max Slope: 15%
Capacity of Board or Plate
Board Width
Board Length
(at least 12"–18" wider than the
widest load or fork truck)
(long enough to minimize steepness
of incline into the truck)
Foot traffic, hand trucks and
hand pallet trucks
36" or 48" for pedestrian traffic;
48" for hand pallet trucks
Approx. 9" per inch of height
difference—dock surface to trailer
floor (usual minimum length: 36")
Three-wheeled and four-wheeled
fork lift
Recommended minimum: 60"
Approx. 7"–8" per inch of height
difference—dock surface to trailer
floor (usual minimum length: 36")
Note: most popular widths:
Note: most popular lengths:
Plates:
Boards:
Plates:
Boards:
36" & 48"
60" & 72"
36", 48" & 60"
48", 60" & 72"
Dock Plate and Dock Board Comparison
Not sure which dock board
is right for you? Refer to
these tables to find
exactly what you need.
18
Advantages and Disadvantages of Dock Boards and Dock Plates
Type of Board/Plate
Advantages
Disadvantages
Aluminum Dock Plate
Light weight
Usually moved by hand
Relatively inexpensive
Damages easily if overloaded
Not suitable for motorized traffic
Aluminum Dock Board
Relatively light weight
Moved by hand/lifting chains
Higher capacity than plates
Bends readily if overloaded or hit
May shift with heavy use
2-Pin Steel Truck Board
Stronger than aluminum units
Greater longevity than aluminum
Pins securely lock against trailer
Lays flat on dock when idle
Heavy—requires fork lift to move
Unsuitable for truck angle parked
4-Pin Steel Truck Board
Suitable for truck angle parked
Greater longevity than aluminum
Best board for OTR trailers
Lays flat on dock when idle
Heavy—requires fork lift to move
Requires time to set locking pins
®
Rail Dock Board Worksheet
Each rail dock board is manufactured for a specific application. This worksheet must be submitted
complete with all orders for rail dock boards. Please photocopy this worksheet and fax in for a
quotation or for placing an order.
Type of Rail Car to be serviced: __________________________________________
(Boxcar, Refer, Hi-Cube, D.F., All door car, Flat car, etc…)
If dock board is to be used at more than
one location, measure and complete a
worksheet for each location.
Distance from inside of rail to dock. (X1): __________________________________
Measure 2 locations 20 ft. away from the center of the dock board position. Take the same measurements
in all locations where the rail dock board to be used. For a long open dock measure every 20 ft.
Height from the top of the rail to the top of the dock. (Y1): ____________________
Use a line level and string measuring at every dock board location.
Dimension is the distance between inside
of adjacent rails. (Z)
The board length must be adequate to span the maximum
dock-to-car or car-to-car distance and must achieve the
required height deferential at an acceptable grade.
Narrowest rail car door to be serviced: _______________________________________
(Generally ranges from 6 ft. to 20 ft.)
Narrowest opening the rail board must pass through: ___________________________
Desired dock board width: _________________________________________________
The dock board width should be 2 in. to 4 in. narrower than the minimum car door
opening width encountered at this site and 12 in. less than the dock door opening.
(Usable width = “Board width” minus 6 in. overall width = Board width plus 8 in.)
Desired dock board flair: (10%, 20%, 30%) ____________________________________
Flair provides a dockside lip of greater width than the carside lip.
Flair allows greater turning room, safer operation and reduces tire wear.
Truck to be used to service the Rail Car _______________________________________
Type of fork lift attachment to be used _______________________________________
Rail Board Capacity Desired
Fork lift capacity _______________ Fork lift & attachment weight ______________
Is the face of the dock square?
yes
no
If not, describe: ______________________________________________________
Are there dock projections within 10 in. of the top of the dock surface?
yes
no
If so, describe: (This will affect the length of the dock board.
Look for anything that will keep the automatic lock from working.)
_________________________________________________________________________
Date Submitted _______________ Salesperson ______________________________________
Dealer Name _________________________________ Phone ___________________________
City/State ____________________________________ Fax ______________________________
Please photocopy and complete this worksheet, then fax to: 414-453-9975.
19
Pit Leveler Selection Guide
Type of Load Being Handled
Heavier volumes of traffic and heavier load weights are best
served by higher capacity levelers. Cost of the leveler is
always a consideration, but the long-term cost of ownership
is the primary issue. As a result, a lower cost leveler
shouldn’t be used if it is not adequate when considering
the duty cycle involved. The higher the quality and load
capacity of the leveler, the longer it will last.
Pit Leveler Sizing
What is the configuration (number, size and arrangement
of wheels—a three wheeled forklift concentrates the
load) and the gross weight of the loading vehicle?
·
·
What is the gross weight of the heaviest load carried?
·
At what speed is the fork truck or other loading vehicle
traveling?
·
What is the frequency of use (shifts
shifts per day; trucks per shift
shift)?
What is the maximum height difference between the
truck bed and the dock?
With Lip
Extended
Actual Leveler Size
Lip Retracted
W×L
W×L
W×L
W×L
72" × 63"
72" × 87"
72" × 111"
78" × 63"
78" × 87"
78" × 111"
83" × 63"
83" × 87"
83" × 111"
74" × 63"
74" × 87"
74" × 111"
80" × 63"
80" × 87"
80" × 111"
85" × 63"
85" × 87"
85" × 111"
6’ × 8'
6' × 10'
6.5' × 10'
6.5' × 10'
6.5' × 10'
7' × 6'
7' × 8'
7' × 10'
Dock Leveler Capacity
·
Nominal
Size
6' × 6' 6"
6' × 8' 6"
6' × 10' 6"
6.5' × 6' 6"
6.5' × 8' 6"
6.5' × 10' 6"
7' × 6' 6"
7' × 8' 6"
7' × 10' 6"
Working
Range
Pit Dimensions
Depth
Rear Front
19.5"
19.5"
23.5"
19.5"
19.5"
23.5"
19.5"
19.5"
23.5"
20"
20"
24"
20"
20"
24"
20"
20"
24"
Up
Down
8"
12"
12"
8"
12"
12"–16"
8"
12"
12"–16"
12"
12"
16"
12"
12"
16"*
12"
12"
16"*
* For 10' long hydraulic levelers, the up and down working range is 16".
For 10' mechanical levelers, a 16" up working range is available as an
option by adding a longer upper bar to the leveler.
Typical Minimum Dock Leveler Lengths
Height
Differential
Truck to Dock
Use the following formula in determining the base capacity:
Leveler
Length
Maximum
Grade
Electric Pallet Truck
Operation
(Max Grade: 10%)
Add the weight of the load to the gross weight of the
vehicle and multiply by two.
1"–2"
3"–4"
5"–6"
7"–8"
9"–10"
11"–12"
13"–14"
15"–16"
(Example: 4,000 lbs. load + 8,000 lbs. forklift weight =
12,000 lbs. × 2 = 24,000 lbs. or a 25,000 lbs.
capacity unit.)
This formula will work in most cases up to a 7% grade, less
than 5 MPH forklift speed and no more than 8 trucks per
day and a maximum of 20 rollover cycles per vehicle. If
these parameters are exceeded, the next higher capacity
leveler should be used.
6'
6'
6'
8'
10'
N/A
N/A
N/A
3.3%
6.7%
10.0%
9.6%
9.2%
N/A
N/A
N/A
Leveler
Length
Maximum
Grade
Electric Fork Truck
Operation
(Max Grade: 10%)
6'
6'
6'
8'
10'
N/A
N/A
N/A
Leveler
Length
Maximum
Grade
Gas Fork Truck
Operation
(Max Grade: 10%)
3.3%
6.7%
10.0%
9.6%
9.2%
N/A
N/A
N/A
6'
6'
6'
6'
8'
8'
10'
10'
3.3%
6.7%
10.0%
13.3%
12.0%
14.3%
13.0%
14.8%
Width of a Pit Leveler
Most trailers to be serviced will be limited to an overall
width of 8' 6". The dock leveler widths available from
Handle-It™ range from 72" to 84".
Mechanical vs. Hydraulic Pit Levelers
Mechanical pit levelers, while being slightly less
expensive than hydraulic units to buy and install, require
periodic adjustment, raising the cost of ownership.
Length of a Pit Leveler
A pit leveler is used when the dock to truck height
difference is greater than 5" ± and there is available space
for the longer leveler. The longer the leveler is, the less
impact that will occur due to a gentler slope, which means
longer leveler life. The leveler length will be determined by
the available space and the height difference between the
dock and the trucks being serviced. As a general rule the
tables on the left can be used to determine leveler length.
Typical truck and trailer heights are:
20
Flatbed Trucks:
48" – 60"
Semi-Trailer
44" – 52"
High Cube Truck
36" – 42"
Straight Truck
36" – 48"
Hydraulic units tend to have a longer life
with less maintenance due to smoother
automatic operation.
All Handle-It® power packs and electrical wiring are UL approved.
Installation
A professional installer should be used to install Edge-of-Dock Levelers and Pit Levelers
in accordance with installation instructions provided with each Handle-It® unit. Safety
should be a primary concern, and a professional installer is the best assurance of safety.
®
Sales Policies
Return Goods Authorization Policy
MII Equipment, Inc. prices are subject to change without notice. MII Equipment, Inc.
also reserves the right to alter product specifications, designs and shipping weight
without notice. Customer service staff is available to provide written quotations for
all products upon request.
MII Equipment, Inc. provides the Return Goods Authorization (RGA) Policy as a
courtesy to our distributors in the event that they do not receive what they desired.
If a customer wishes to return an MII Equipment, Inc. product, please contact the
customer service staff at MII Equipment, Inc. and request an RGA number. This
request must be made on or before the fifteenth calendar day following the date of
the MII Equipment, Inc. invoice for the merchandise.
Credit Policy
Standard terms of payment are net 30 days from day of invoice with approved
credit. Terms for specially designed products are 1/3 nonrefundable payment with
the order and 2/3 payment net 30 days from date of invoice. New distributors are
required to use a valid credit card or prepay their first order prior to shipment. MII
Equipment, Inc. will not release any orders to distributors who have outstanding
balances over 60 days from invoice date. MII Equipment, Inc. reserves the right
to charge a 1½ % per month charge on outstanding balances over 30 days from
invoice date.
Shipping Policy
The RGA number must appear on the outside of any packaging material for a return
to be accepted and processed by MII Equipment, Inc. Customers shipping returns
from the Continental US, Canada or Mexico must ensure that the returned product
arrives within fourteen days from date of RGA issue for the goods to be accepted
at MII Equipment, Inc. Returns from other locations must be shipped within the
fourteenth day of RGA issue. All merchandise must arrive FOB at the MII Equipment,
Inc. facility or the shipment will be subject to refusal and returned to the sender. All
credits are issued less restocking and refurbishing charges, regardless of whether
the merchandise was damaged in transit.
All products are shipped F.O.B. Factory or Milwaukee Warehouse. Freight charges
will be “Third Party Billed” by the carrier, unless freight collect is specified. Parts
orders weighing 70 lbs. or less will ship UPS ground, pre-pay & add, unless
otherwise requested. Parts orders greater than 70 lbs. will be shipped common
carrier. Published shipping weights may fluctuate due to options and/or packing
material. MII Equipment, Inc. reserves the right to add a handling charge to all parts
orders. MII Equipment, Inc. is not responsible for loss or damage in transit. It is the
responsibility of the receiver (consignee) to inspect for damage and file claims
against the carrier. MII Equipment, Inc. will assist the consignee whenever possible
in filing freight claims.
Handle-It® Limited Warranty Policy
Order Change Policy
There are no implied warranties of any kind, more specifically; there are no warranties
of merchantability or fitness for any particular purpose. The sole warranty of MII
Equipment, Inc. shall be as set forth in this limited warranty.
If a purchase order for unshipped standard or modified product is changed within
7 calendar days after the receipt of the purchase order, there will be no charge.
However, if a change is required for an unshipped unit from the eighth calendar day
following the receipt of the purchase order, a surcharge will be added. In the event
that material unique to the purchase order has been purchased or manufactured,
regardless of the time frame, and a change is required that eliminates the need
for the purchased or manufactured material, the cost of the material as well as a
surcharge will be added to the purchase order. All cancellations of purchase orders
may be subject to a cancellation fee depending upon the stage of production.
There will be no cancellation fee if notice is received for an unshipped unit prior
to the seventh day after receipt of the purchase order. However, if a cancellation is
required for an unshipped unit from the eighth calendar day following the receipt
of the purchase order, a surcharge will be added. In the event that material unique
to the purchase order has been purchased or manufactured, regardless of the time
frame, and a cancellation is required that eliminates the need for the purchased or
manufactured material, the cost of the material as well as a surcharge will be added
to the purchase order. If a cancellation is received on the day of shipment, the MII
Equipment, Inc. restocking policy will apply. Cancellation of custom engineered
products will result in forfeiture of deposit plus any additional applicable fees.
Restocking Policy
The goal of MII Equipment, Inc. is for the customer to be satisfied with their order.
With the exception of custom ordered items, merchandise may be returned, but is
subject to a minimum 20% restocking fee. Before returning any products, please
review the Return Goods Authorization Procedures and contact the customer
service staff at MII Equipment, Inc. for instructions.
MII Equipment, Inc. warrants all of its Handle-It® products against defects in welded
structural frame and, if applicable, scissor legs from faulty material and workmanship
for a period of 1 year from the date of invoice.
All batteries are covered under a separate limited warranty from the battery
manufacturer for a period of one year from the date of invoice.
All other components have a limited warranty against defects in faulty material and
workmanship for a one (1) year period from the date of invoice. Please note that
prior authorization from MII Equipment, Inc. is required on all warranty work.
MII Equipment, Inc. will elect to repair or replace a defective component without
charge, if any components should become defective within the limited warranty
period. Proof of purchase is required for warranty. The charge for shipping the
defective component is the responsibility of the buyer and the shipment must be
accompanied with an RGA number. The shipping charge to return the component
to the buyer is the responsibility of MII Equipment, Inc. This limited warranty does
not cover labor expense for removal or reinstallation of components.
This limited warranty shall not cover, among other things, damages resulting from
foreign matter or water, failure to provide reasonable and necessary maintenance,
use of the product while the charger is plugged into an AC outlet, if applicable, or
failure to follow operating instructions. The limited warranty is not valid for damage
resulting from negligence, accident, unreasonable use, abuse or misuse, exceeding
rating plate capacities or altering the product without MII Equipment, Inc. written
authorization.
MII Equipment, Inc. makes no representation that this product complies with local,
state, or federal safety/product standards or codes. Should this product fail to
comply in any way with those codes, it shall not be considered a defect of materials
or workmanship. MII Equipment, Inc. shall not be held liable for any damages
resulting from noncompliance.It is the distributor’s responsibility to exercise this
limited warranty. This limited warranty is provided to the original purchaser(defined
as the original end user) and is not transferable. This constitutes the complete and
final statement involving MII Equipment, Inc. and the company’s limited warranty
obligations for Handle-It® brand products.
© 2011 Handle-It, Inc. All rights reserved.
Distributed By:
Handle-It, Inc.
P.O. Box 26335 Milwaukee WI 53226
Phone: 1-800-236-1080 | Fax: 414-453-9975
www.handleitinc.com

impact protection and dock equipment - Handle-It

Transcription

Similar documents

Pentalift Edge of Dock Leveler - Pentalift Equipment Corporation

RLASD Substitutes - Navigating Your Mac

tobacco dock • e1 - Canvas Event Venues

Safety Products Vehicle Restraint Automatic PowerHook

Mar ib.pub - Bellingham Cold Storage

EPM and DYC Sept 2015 Newsletter

edge-of-dock levelers

the Connect-a-Dock catalog.

view printable hirail catenary bucket truck brochure