SIS Software Install

SIS So%ware Install Instruc0ons Cookbook Mul0beam Advisory Commi;ee March 21, 2012 SIS 3.8.3 Mul0beam Advisory Commi;ee – March 21, 2012 1 Contents •  How to install SIS so%ware •  Configure the datagram distribu0on so%ware NOTE: These are direc0ons for installing the SIS so%ware. If you are doing this to replace a corrupt database, please see the “SIS Configura0on Backup” and “SIS So%ware Uninstall” cookbook. Mul0beam Advisory Commi;ee – March 21, 2012 2 SIS So%ware Install Click Here Insert the SIS so%ware DVD. If a window does not automa0cally open, browse to the DVD using a file explorer and double click on the start.html file. Click on the SIS SW Installa0on Link. Mul0beam Advisory Commi;ee – March 21, 2012 3 SIS So%ware Install Click Here Once this SIS So%ware Installa0on opens up, click on the “Press here to install Seafloor Informa0on System”. Mul0beam Advisory Commi;ee – March 21, 2012 4 SIS So%ware Install If a security warning pops up click run to con0nue the installa0on. Mul0beam Advisory Commi;ee – March 21, 2012 5 SIS So%ware Install Choose your install language. Mul0beam Advisory Commi;ee – March 21, 2012 6 SIS So%ware Install Click on the “Next” bu;on to con0nue installa0on. Mul0beam Advisory Commi;ee – March 21, 2012 7 SIS So%ware Install Verify that this is the version and build of SIS you want to install. Mul0beam Advisory Commi;ee – March 21, 2012 8 SIS So%ware Install Make sure that SIS is selected as an installable component. Mul0beam Advisory Commi;ee – March 21, 2012 9 SIS So%ware Install Choose where you want to store you raw data and where you want to store your grid data files. Mul0beam Advisory Commi;ee – March 21, 2012 10 SIS So%ware Install Define the IP number or hostname of the Database server. If the database is going to be on the same machine you are running SIS (the normal opera0on mode) enter localhost. Mul0beam Advisory Commi;ee – March 21, 2012 11 SIS So%ware Install Choose the install loca0on for the SIS so%ware. The default value of C:\Program Files\Kongsberg Mari0me\SIS\ is the normal install loca0on. Mul0beam Advisory Commi;ee – March 21, 2012 12 SIS So%ware Install If you want Shortcuts to be put under the Start menu in a SIS folder simply click “Install”. Otherwise define a different folder name or click “Do not create shortcuts”. Mul0beam Advisory Commi;ee – March 21, 2012 13 SIS So%ware Install During the install process a dialog box will appear asking about installing a MATLAB compiler run0me, click “OK”. Mul0beam Advisory Commi;ee – March 21, 2012 14 SIS So%ware Install A%er the install is done Reboot the machine to finish the process. Mul0beam Advisory Commi;ee – March 21, 2012 15 SIS So%ware Install Restart SIS and reconnect with the TRU through the pulldown menu. If the TRU does not appear, Rescan, and select it. Mul0beam Advisory Commi;ee – March 21, 2012 16 SIS So%ware Install It is now 0me to import your PU sefngs (offsets, device sefngs, etc). Under the “File” menu select “Import PU parameters….” Mul0beam Advisory Commi;ee – March 21, 2012 17 SIS So%ware Install A dialog box will appear. Browse to the loca0on you saved you PU parameters (normally in the E:/
sisdata/common/pu_param directory. Select your saved file and click “OK”. Mul0beam Advisory Commi;ee – March 21, 2012 18 SIS So%ware Install Don’t worry if you see plenty of blinking red fields a%er doing this. Go to the “File” menu and select quit….everything will be ok. Mul0beam Advisory Commi;ee – March 21, 2012 19 SIS So%ware Install Start up SIS again and connect to the TRU through the pulldown menu. Mul0beam Advisory Commi;ee – March 21, 2012 20 SIS So%ware Install It is now 0me to import all of you user sefngs such as screen layouts, datagram subscrib0ons, external sensors, etc. Go the the “File” menu and select “User sefngs”. Mul0beam Advisory Commi;ee – March 21, 2012 21 SIS So%ware Install You should only load user sefngs from a machine with the same number of hard drives. This is not normally a problem as the usual is to load sefngs from the same machine. Click “Ok”. Mul0beam Advisory Commi;ee – March 21, 2012 22 SIS So%ware Install The “Import User Sefngs” dialog box will appear. Click on the file selec0on box for User Parameters (circled in the figure above). Mul0beam Advisory Commi;ee – March 21, 2012 23 SIS So%ware Install Select the User Sefngs parameters file. This file will end in a .params suffix. Mul0beam Advisory Commi;ee – March 21, 2012 24 SIS So%ware Install Click on the file selec0on box for “Datagram subscrip0ons”. Mul0beam Advisory Commi;ee – March 21, 2012 25 SIS So%ware Install Select the Datagram subscrip0ons file. This file will end in a .dgmsubs suffix. Mul0beam Advisory Commi;ee – March 21, 2012 26 SIS So%ware Install Click on the file selec0on box for “Survey templates”. Mul0beam Advisory Commi;ee – March 21, 2012 27 SIS So%ware Install Select the Survey template file. This file will end in a .srvtpl suffix. Mul0beam Advisory Commi;ee – March 21, 2012 28 SIS So%ware Install Click on the file selec0on box for “Projec0ons”. Mul0beam Advisory Commi;ee – March 21, 2012 29 SIS So%ware Install Select the Projec0ons file. This file will end in a .proj suffix. Make sure you DO NOT select the file that ends with a .srvtpl.proj suffix. Mul0beam Advisory Commi;ee – March 21, 2012 30 SIS So%ware Install Click on the file selec0on box for “Frame sefngs”. Mul0beam Advisory Commi;ee – March 21, 2012 31 SIS So%ware Install Select the Frames file. This file will end in a .frames suffix. Mul0beam Advisory Commi;ee – March 21, 2012 32 SIS So%ware Install Click on the file selec0on box for “External sensor sefngs”. Mul0beam Advisory Commi;ee – March 21, 2012 33 SIS So%ware Install Select the External Sensors file. This file will end in a .extsens suffix. Mul0beam Advisory Commi;ee – March 21, 2012 34 SIS So%ware Install Click the “Accept” bu;on now that you have filled out all of the fields. Mul0beam Advisory Commi;ee – March 21, 2012 35 SIS So%ware Install Click the “Accept” bu;on. If you are impor0ng these sefngs from another sounder make sure that you change the Sounder’s serial to match the sounder you are impor0ng for. Mul0beam Advisory Commi;ee – March 21, 2012 36 SIS So%ware Install Click the “Ok” bu;on, you are done impor0ng sefngs. Mul0beam Advisory Commi;ee – March 21, 2012 37 SIS So%ware Install Quit SIS in order to finalize the loading of the User sefngs. Mul0beam Advisory Commi;ee – March 21, 2012 38 SIS So%ware Install Start up SIS again and connect to the TRU through the pulldown menu. Mul0beam Advisory Commi;ee – March 21, 2012 39 SIS So%ware Install The one parameter that the above method does not correctly set (apparently) is the grid engines cell size. To fix this select “View” -­‐> “ Tear Off” -­‐> “New Survey”. Mul0beam Advisory Commi;ee – March 21, 2012 40 SIS So%ware Install Change the “Number of cells in processing grid:” to 128x128 and change the “Cell size (m) to 150 for the EM122 and 5 for the EM710. It might be necessary to change to EM710’s grid cell size to 10m depending upon the size of the survey area. Mul0beam Advisory Commi;ee – March 21, 2012 41 Datagram Distribu0on Configura0on R/V Kilo Moana’s EM122 Data Distribu0on sefngs. R/V Kilo Moana’s EM710 Data Distribu0on sefngs. SIS as part of the install process wiped out the datagram distribu0on parameters. Open the so%ware and add a source port of 4310 for Centerbeam Depth and a the desired IP and des0na0on port (for the Kilo Moana’s EM120 you should enter 192.168.1.40:5634 and for the EM710 you should enter 192.168.50:5635). Mul0beam Advisory Commi;ee – March 21, 2012 42