INDUSTRIAL ELEVATORS
Transcription
INDUSTRIAL ELEVATORS
INDUSTRIAL ELEVATORS Experience the Advantage of Rack and Pinion www.hoistco.com Established in 1979, Hoist-Co, Incorporated is one of the oldest full-service rack and pinion elevator companies in the United States. Hoist-Co, Incorporated is classified as a small business through the Central Contractor Registration. At Hoist-Co, Incorporated we live by our mission statement: “We will offer our customers the best quality service and products available at a fair price”. Hoist-Co, Incorporated is proud to be the U.S.A. source for STROS elevators. STROS rack and pinion special purpose industrial elevators and construction hoists are primarily used as service elevators for transporting personnel and materials. • Designed for harsh environments • Durable and reliable • Long product life cycle Elevator Applications • • • • • • • • • • • Power plants Transmission towers Refineries Underground tunneling sites Silos Warehouses Bridges and dams Cement plants Marine and offshore Petrochemical and refining Any location where conventional traction or hydraulic elevators are impractical to install • Over 50 years manufacturing experience with strong engineering background • State-of-the-art manufacturing facilities in Sedlcany, Czech Republic • ASME A17.1-2010/CSA B44-07 elevator code compliant • ISO: 9001 certified • Provides engineering calculations, certifications, and manufacturing documentation required for approval by state and local authorities www.hoistco.com Available Options • • • • • • • • • • • • • • Total application engineering Door placement Extended platforms Single automatic or collective operation Frequency inverter Overload detection device Special control systems Explosion-proof protection NEMA 4X ventilation fan Probe hatch kit Rack lubricator Cab bumper rails Remote monitoring Door open audible signal We custom design, produce and install the exact elevator that meets your needs. Cages The cage is welded of quality steel profiles. The walls are covered with aluminum sheeting or other special finishes. Based on your needs and application, doors can be arranged with A, B, C, or a combination of those arrangements. Steel diamond plate floors are a standard item. Drives The drive unit consists of one, two or three helical bevel gearboxes with motors located inside or above the cage. The motors are equipped with electromagnetic disc brakes that can be released by hand. 2 Mast Sections High quality is the standard in everything we do. Mast sections are available with wall sections of 4.0, 6.3 or 8.0 mm depending on the required lifting height. They are available in the I, H, and S profiles based on space and capacity needs. Emergency Lowering Additional elevator safety features available include regenerative lowering, fireman’s service, directional and final limit switches, communication devices, and safety hooks. These may be required for code compliance base on your equipment and location. Standard on each unit is a manual lowering device controlled by regenerative power. This ensures a safe and controlled descent in an emergency situation. Designed to be user friendly, the lowering device is activated from inside the cab. No undo wear or stress is placed on the braking system allowing longer life and dependable performance. Capacity HS 300 660 lbs. HS 400 880 lbs. HS 450 990 lbs. HS 600 1320 lbs. HS 1200 2645 lbs. Rated Speed DOL VFC 130 fpm 190 fpm 115 fpm 165 fpm 100 fpm 150 fpm 130 fpm 230 fpm 115 fpm 130 fpm Cage ID 3’ x 3’ 3’ x 3’10” 3’ x 4’4” 3’5”x 4’10” 4’5” x 6’7” Standard Lift Height 1150 ft. 1150 ft. 1150 ft. 1150 ft. 1150 ft. Motor HP DOL VFC 2x6 2x5 2x6 2x5 2x6 2x5 2x7 2 x 10 2 x 11 2x7 Frequency HP 20 20 20 40 30 Power Supply 3 x 480V,60Hz 3 x 480V,60Hz 3 x 480V,60Hz 3 x 480V,60Hz 3 x 480V,60Hz Car dimensions listed are standard sizes. Car sizes are customizable within code. Listed sizes of motors and inverters can be interchanged within code to meet required speed. Elevator can be delivered with counterweight if required. www.hoistco.com Safety Device The centrifugal safety device is one of the basic elements of the rack and pinion elevator. The purpose of the safety device is to stop the elevator safely if the nominal speed is exceeded. The safety device engages with the rack in the event of a drive unit or brake failure. The safety device is adjusted to the required value by the manufacturer and tested. Every 3.5 years the safety device must be thoroughly inspected in a test facility and recalibrated if needed. Our safety device exchange program is integral to the continued safety and operation of the elevator. This program is both reliable and affordable. Your safety is our priority. Capacity HS 1500 3300 lbs. HS 2000 4400 lbs. HS 2700 6000 lbs. HS 3200 7000 lbs. Rated Speed DOL VFC 125 fpm 265 fpm 125 fpm 215 fpm 125 fpm 180 fpm 100 fpm 150 fpm Cage ID 5’ x 6’7” 5’ x 8’10” 5’ x11’5” 5’x 12’10” Standard Lift Height 1150 ft. 1150 ft. 1150 ft. 1150 ft. Motor HP DOL VFC 2 x 11 3 x 12 2 x 15 3 x 15 2 x 15 3 x 15 3 x 15 3 x 15 Frequency HP 75 100 100 100 Power Supply 3 x 480V,60Hz 3 x 480V,60Hz 3 x 480V,60Hz 3 x 480V,60Hz Car dimensions listed are standard sizes. Car sizes are customizable within code. Listed sizes of motors and inverters can be interchanged within code to meet required speed. Elevator can be delivered with counterweight if required. 4 Construction Hoists STROS construction elevators and hoists are available for fleet ownership. Backed by STROS engineering, we offer 17 standard construction hoists with the option to customize equipment to meet your needs. Designed for rugged use in harsh environments, STROS hoists and lifts have a long life cycle. Modernizations Modernizations are an economical way to bring your elevator up to current safety standards and codes as well as improve the overall operation of your machine. We offer modernization for all brands of existing rack and pinion elevators. Our team will provide you a detailed report of the condition of your existing equipment, identifying priority items requiring attention, and a written recommendation with cost analysis. Modernizations allows: • • • • • Pre-planning for budgets Tailored plans to meet your needs Reduced downtime Cost-effective approach Extended life of your machine Extend the life of your elevator through modernization. Controller and Signal Fixture Upgrades Through our suppliers, we have developed a non-proprietary controller that is convertible to your existing equipment. Designed with the end user in mind, our controllers offer simple diagnostic tools to ensure a safe and reliable system. Signal fixtures are available for both cars and landings. Many existing elevators can be upgraded to take advantage of softer starts and stops as well as extend the life of key parts. www.hoistco.com Service and Parts Since 1979, Hoist-Co, Incorporated has been providing quality service and parts at affordable prices. We specialize in rack and pinion elevators. We provide service and repair for all brands of rack and pinion elevators, regardless of the manufacturer. Our knowledge of the equipment combined with our professionally trained and experienced technicians allow us to provide dependable service. Our goal is to keep your machines safe and reliable through preventative maintenance and maximize your uptime through responsive emergency repairs. We offer tailor-made service programs to fit your equipment needs and budget. • • • • • Customized preventative maintenance plans Emergency repairs Replacement parts Outage support Routine inspections When it comes to rack and pinion elevators, no one does it better. Replacement Parts Our parts department stocks key rack and pinion parts for most major manufacturers. We offer OEM and quality engineered third party parts with no minimum order. 6 www.hoistco.com 800 Industrial Park Road P.O. Box 27 Baldwin City, KS 66006 Kevin Harrison, President 785-594-2436 [email protected] 800-255-5438 Toll Free 785-594-2436 Office 785-594-3275 Fax Thomas O’Keefe, National Sales Manager 423-332-6222 [email protected] © 2012 Hoist-Co, Inc.