energy - Heat Merchants

INTRODUCING AQUAREA
Heat pumps BY PANASONIC
THE SUSTAINABLE SOLUTION FOR
HEATING AND HOT WATER SYSTEMS
RENEWABLE
ENERGY
Renewable Energy | 1
About Heat Merchants
Heat Merchants is a 100% Irish owned company supplying a comprehensive range of products
including central heating systems, gas and oil boilers, spare parts, bathrooms and the latest
renewable energy technology to the domestic and commercial heating and plumbing industry
accross Ireland. Through our national network of 31 branches and our central distribution
hub based in Athlone we always have an extensive range of stock available either in your local
branch or for next day delivery to ensure faster, more efficient customer service.
Renewable energy solutions are an ever increasing part of our business and we work with a
network of international suppliers to introduce the latest and most efficient technology to the
Irish market. Our team of renewable energy specialists is on hand to offer expert advice and
technical support plus a complete system design and specification service for both domestic
and commercial projects and can advise on the best options for compliance with new
building regulations while delivering cost savings for both home and business owners.
HOW DO YOU GET HEATING
AND HOT WATER FROM AIR?
Introducing the Panasonic
AQUAREA Air Source Heat Pump
Aquarea High Performance
An AQUAREA air source heat pump captures heat
from the air and transfers this heat into the home via
a compressor and condenser. By applying a little more
energy from electricity a heat pump can raise the
temperature of this heat energy to the level required in
the home. Heat Pumps offer an energy efficient way of
providing heating in the home, as they acquire 78% of
their heat energy from free and renewable sources.
From 3 to 16kW
For a house with low temperature radiators
or under-floor heating, our high performance
Aquarea HP is an ideal solution, which can work
as a standalone unit or be combined with an
existing gas or oil-fired heating system.
This new solution is ideal for low energy
consumption homes.
Water output is at 25-550C
Air Source Heat Pumps - Quick Facts
5.08 COP
• Provides sustainable heating, cooling and hot water
high efficiency
• Typically 30%-40% reduction in annual energy bills
• Operates even in freezing temperatures (-20˚C)
• External location saves valuable internal living space
>
>
>
>
>
>
>
>
100% Irish owned
31 branches nationwide
Dedicated commercial division
Technical support & design team
Over 25 years expertise
Leading stockists of spare parts
Expertise in specifying for residential
and commercial projects
Advice and guidance on compliance with
Part L building regulations
• Proven technology from Panasonic – first produced
in 1973 and already well established across EU
6kW Aquarea
9kW Aquarea
12kW Aquarea
14kW Aquarea
16kW Aquarea
Aquarea HT
• Once sized correctly a Heat Pump can provide all
heating & hot water without back up from oil, gas
or electric heaters.
From 9 to 12kW
Ideal for retrofitting in a house when keeping
traditional high temperature radiators (such as cast
iron radiators), the Aquarea HT Solution is the most
appropriate as the Aquarea HT provides output
water temperatures of 25-65oC even at outdoor
temperatures as low as -20oC.
• Highly compatible with other energy efficient
energy sources e.g. photovoltaic panels
• Simple to integrate into most heating systems
• Ideal for use with underfloor heating & aluminium
radiators
High Temperature Monobloc
• Improved Building Energy Rating (BER)
650C
• Reduces carbon footprint
output water
Warranty: 5 years on the compressor & 3 years on all other
working parts. Option of 7 year warranty available - contact
Heat Merchants for details.
Warranty subject to the heat pump being commissioned
by a Heat Merchants/ Panasonic Pro Partner Agent and
routine maintenance.
High Connectivity
Standard Monobloc
U55999
U56000
U56001
U56002
U56003
U53671
U53672
9kW Aquarea HT
12kW Aquarea HT
Aquarea T-CAP
From 9 to 16kW
Aquarea T-CAP always has high efficiency &
high heating capacity even at extremely low
temperatures. If the most important aspect is
to maintain nominal heating capacities even at
temperatures as low as -150C, select the Aquarea
T-CAP. This ensures that there is always enough
capacity to heat the house without using electric
heat. Water output is at 25-550C
Energy Savings
T-CAP Heat Pump Monobloc/Split
2 | Heat Merchants
U53669
9kW Aquarea T-CAP
100% 0 U53670
12kW Aquarea T-CAP
capacity at -15 C
16kW Aquarea T-CAP Split 3 Phase
Renewable Energy | 3
Aquarea Energy Efficiency
compared to Other Heating Systems
PANASONIC AQUAREA HEAT PUMP
FREQUENTLY ASKED QUESTIONS
What other components do I need to install the heat pump?
Typically you will also need a buffer tank of 70 – 90 litres, Hi Gain cylinder with 3m2 coil or Hi Gain cylinder &
buffer combi unit, 3 port diverting valve & Y strainer for return line.
Aquarea T-CAP and High
Performance Comparison
COP
5.0
kW
Aquarea HP
4.0
14.0
Does the heat pump require back up from an oil or gas boiler?
No. The Heat Pump can cater for all your heating & hot water needs once sized correctly.
Aquarea T-CAP
4.5
3.5
12.0
3.0
10.0
Conditions :
Water input temperature: 300C
Water output temperature: 350C
Outside temperature: +70C
2.5
8.0
2.0
6.0
1.5
4.0
1.0
2.0
0.5
0.0
0.0
+7ºC
-7ºC
-15ºC
Aquarea T-CAP maintains the nominal
capacity until -150C (example for 12 kW)
+7ºC
-7ºC
Where do I site my air source heat pump?
The heat pump must be placed a minimum of 300mm from a wall , on a plinth so as snow drifting cannot
occur in front of the machine. You must also leave clearance in front of the machine, do not locate it in
front of a wall or fence. It is advisable to locate the machine so as it is not facing directly in towards a door or
window as the air coming from the fan is very cold when machine is in full operation.
-15ºC
Aquarea T-CAP and High Performance have
extremely high efficiency even at -150C
Where can I locate the heat pump control panel?
The controller comes with a 15m lead which is coiled up in the heat pump. It can be left in the heat pump or it
can be sited in your dwelling within the 15m or further if required using an extension cable.
Coefficient of Performance / COP
The Coefficient of Performance (or COP) is the efficiency ratio of
the amount of heating provided by a heat pump compared to the
energy consumed by the system. The higher the Coefficient of
Performance the more efficient the system.
AQUAREA
What are the hot water cylinder requirements with a heat pump?
Any type of cylinder can be used; copper, stainless steel or glass lined. The key component is the 3m2 or Hi
Gain coil which must be in any cylinder that you used with any heat pump. It would be desirable to have an
electrical immersion fitted also.
UP TO 78%
ENERGY SAVINGS
*
RENEWABLE
ENERGY
The efficiency of the Heat Pump is tested at 70C outside
temperature and 350C water temperature. The COP is normally
between 4.5 and 5. A COP of 4.74 means that the heat pump gives
out 4.74kW of heat energy for every 1 kW of electrical energy used.
0,78
kW
RENEWABLE
ENERGY
78%
OUTDOOR
FREEENERGY
AIR
SOURCE ENERGY
1kW
HEAT
22%
0,22kW
ELECTRICITY
COP =
Heat Output kW
Heat Input kW
ELECTRICITY
AQUAREA
GAS
BOILER
Power Input/Energy
Consumption
Power Output
Heating Capacity
OIL
BOILER
1kW
0,9kW
GAS
HEAT
1kW
OIL
ELECTRICITY
ELECTRICAL
HEATING
0,9kW
HEAT
1kW
ELECTRICITY
Conditions:
Water
inputCONSUMPTION
temperature 300C.Water Output Temperature 350C
POWER INPUT
/ ENERGY
POWER OUTPUT / HEATING CAPACITY (kW)
How much space is needed in the boiler house?
Heat pumps normally require a footprint of 1m x 1m and are approx 2m high. All heat pumps also require a
buffer tank of approx 15 litres per kW so a typical 10kW heat pump requires a minimum of a 50/75 litre buffer.
The buffer tank needs a similar footprint as the heat pump.
ELECTRICITY
HEAT
OTHER HEATING SYSTEMS
4 | Heat Merchants
How do I size or know what heat pump i need?
There are a number of pieces of information required to size a heat pump, a set of floor plans of the house,
type of construction, location of site, hot water requirement etc. Once we have those we can calculate size
using the Aquarea Software Package and produce a design, select a heat pump & give estimated running
costs and give estimated comparisons of carbon emissions and costs verses oil, gas etc.
1kW
HEAT
How do I get my heat pump commissioned & how much does it cost?
When your installer & electrician have completed their installation in full, complete the Panasonic
Pre-Commissioning Check List and send it into the branch in which you bought your heat pump. They will
book it in with the Commissioning Engineer to have it commissioned and validate your warranty. The cost of
commissioning is €250 plus VAT. (Subject to change please confirm with your branch).
What type of heating system works best with heat pumps?
The best system to use is one that works at low temperatures between 350C - 450C. Underfloor heating is
particularly suitable for use with the lower temperature water from heat pumps. The ideal solution if not using
under floor heating is to use aluminium radiators which operate efficiently with a flow temperature of 450C.
Standard panel radiators can also be used if they are designed correctly.
Free training and consultation for installers is available across our product range.
Call 090 6442300 to speak with our renewable energy team or arrange a convenient time.
Renewable Energy | 5
Sample Hydraulic Installation for monobloc systems
PAnasonic Aquarea Heat Pump Manager
The Panasonic Aquarea Heat Pump range uses a 2-pipe Y-Plan plumbing arrangement. What this means is that the heat
pump controls a motorised 3-port diverting valve and carries out space heating or domestic hot water production. This
allows for a low temperature heating system i.e. under floor heating or low temperature aluminium radiators, but still
allows for high attainable domestic hot water temperatures. The control of the heat pump can be done through the flow
temperature or as with a conventional system, a single room thermostat or multiple thermostats.
The Heat Pump Manager (HPM) is specially designed to ensure the
Aquarea heat pump systems deliver maximum performance and
comfort allowing accurate temperature control based on the outdoor
temperature.
This simple plumbing arrangement below illustrates a typical domestic application, in this case under floor heating on one
floor (zone), low temperature radiators on a second floor (zone) and domestic hot water.
N
Close
Open
l
n
Cool
Heat
n
n
Close
Open
Schematic Diagram - The relevant standards and
directives must be observed.
Close
Open
Sample Hydraulic Installation with Water & Heating
The HPM is the ideal solution if it is necessary to combine multiple heat
pumps and or use a secondary heat source such as solar, gas or oil fired
boilers with the heat pump which makes heat pumps suitable for larger
properties when a large 3 phase unit is not suitable or retro-fit projects
where the existing heating system is maintained. The HPM control
will interface between the different heat sources and utilises the most
appropriate depending on the user preferences.
The HPM also allows for
remote access and monitoring
over the web using Panasonic’s
unique internet applications.
Panasonic have created hundreds of HPM schematics which are available on the Panasonic ProClub website
and the Heat Merchants Technical Support & Design Team can assist in the choosing the best option for your
project requirements.
M
Heat Pump & Boiler Management with Domestic Hot Water
using Aquarea Heat Pump Manager
Room
Thermostat
Heat Pump
Indoor Unit
M
Boiler as
Secondary
Heat Source
min
501
Vessel for increasing the total water volume
- to be used when the total volume is lower
than the minimum volume.
1 Cold Water Connection
2 Room Thermostat
3 Outside Temperature Sensor
(integrated in outdoor unit)
4 Heating Circuit mixer Closed Loop Control
(to be provided by customer)
5 Room Thermostat
Sample hydraulic installation with water heating and heating system (see Aquarea design handbook for other examples)
Legend
Manometer
Heat Pump
Outdoor Unit
Buffer
Heat Pump Manager
Thermostatic Radiator Valve/
Single Room Controller Valve
3- way directional valve/
3 way mixer
Pump
Drain Funnel
Non Return Valve
Water Tapping Point
Shut Off Valve
Dirt Trap
Return
Pressure Reducing Valve
Pressure Relief Valve
Storage Tank
for Minimum Volume
Supply
Temperature Sensor
Control Wire
Overflow Valve
Heat Merchants Technical Support & Design Team can assist in the design of a whole house heating system to meet
heating and hot water requirements, providing comprehensive plumbing and electrical schematics for the heat pumps and
specification of a suitable heating distribution system. On site assistance is available as required.
6 | Heat Merchants
Radiator
Circuit
Cylinder
Solar Photovoltaic Panels and Heat Pump Manager
Panasonic has developed an innovative algorithm for its HPM (Heat Pump Manager) which activates the
heat pump based on the energy produced by the photovoltaic system, the consumption requirement of
the house and the heating demand of the house. The Heat Pump will take the electricity generated by the
solar PV system into consideration for the heating system and the domestic hot water production, without
reducing comfort in the house. Configuration of the HPM with the PV system is easy and can increase the
usage of free electricity by up to 120%.
Panasonic Aquarea T-cap Monobloc Schematic
Full electrical flow guidelines available
from your local branch. Consult your
installation manual for full details.
* Power Supply 3
Only required for
units 12kW & above
*
Standard domestic applications
single phase power is sufficient
8 | Heat Merchants
Renewable Energy | 9
DEAP COMPARISON
Building Elements
Using the national methodology, DEAP, we have
calculated the energy performance of a typical
dwelling using the Panasonic HT and T-Cap heat
pumps and compared this with gas or oil heating
systems all of which have been designed achieve
Part L compliance and an A3 Building Energy
Rating. The procedure takes account of the energy
required for space heating, ventilation, water heating
and lighting, less savings from energy generation
technologies.
Ground Floor
First Floor
U-Values
Floor U-value - W/m2/K0.18
Roof U-value - W/m2/K0.11
Wall U-value - W/m2/K0.15
Window U-value - W/m2/K1.3
Door U-value - W/m2/K2
Air Tightness - Ac/Hradj 0.3
Factor for Thermal Bridging - W/m2/K0.08
Thermal Mass Category
Medium / Low
Ventilation Natural, 5 No. Intermittent / Passive Vents
Heating Loads (from DEAP)
Annual Space Heating Load - kWh/yr
4414
Annual Domestic Hot Water Load - kWh/yr
2609
Domestic Hot Water Cylinder
Joule 300L High Gain Cylinder Thermostat
Yes
Boiler with insulated primary pipe work
Heat Merchants can provide design and
specification assistance in order to maximise
efficiency and meet compliance with building
regulations. We can also assist with sizing and
designing a heat distribution system taking into
consideration the space where it is installed, the flow
and return temperatures of the heating system and
the mean water to air temperature of the emitter.
Heat Source
64 m2
64 m2
Option 1
Option 2
Option 3
PanasonicPanasonic High Efficiency
WH-MHF09D3E5 WH-MXF09D3E5
Gas Boiler
9kW HT
9kW T-Cap
Option 4
High Efficiency
Oil Boiler
Heat Distribution System
Low Temperature Radiators
Low Temperature RadiatorsStandard RadiatorsStandard Radiators
Control Options Picked:
Time and Temperature Control
Yes
Yes
Yes
Yes
Carries out DHW Preparation
Yes
Yes
Yes
Yes
Load or Weather Compensation
Yes
Yes
Yes
No
Boiler Interlock
NA
NA
Yes
Yes
Space Heating Efficiency (HARP)
402.6%
410.7%91.2% 94.8%
Energy Adjustment Factor (Calc. through DEAP)
0.85
0.85
1.02
1.00
Space Heating Adjusted Efficiency
342.21%
349.10%93.02% 94.80%
Energy Adjustment Factor (Calc. through DEAP)
0.7
1
1.02
1
Domestic Hot Water Adjusted Efficiency
281.82%
160.84%93.02% 94.80%
Secondary Heat Source
No
Additional Renewable Energy Required (PV)
No
0.75kWp PV
1.5kWp PV
1.5kWp PV
3-Panels South Facing Roof
6-Panels South Facing Roof
6-Panels South Facing Roof
BER Rating
A3
A3A3 A3
Part L Compliant
Yes
YesYes Yes
10 | Heat Merchants
Renewable Energy | 11
SOLAR
ENERGY
A TYPICAL EXAMPLE OF SAVINGS AND EFFICIENCIES
THAT AQUAREA CAN OFFER TO YOU
As an example we have selected a 225m2 3 bedroom house in Dublin to represent a typical Irish
homeresults
to highlight the potential savings that can be achieved with Panasonic's Aquarea heat pump. *
Calculation
Heat Pump Model - Panasonic Aquarea 9kW T-Cap Monobloc
Monthly heat consumption in kWh
Building
Data
Annual running
cost of heat
pump
Space heating
Domestic Hot Water
Building floor area Circulating pump heating
Heat loss Total per annum
4500
4000
3500
3000
2500
2
2000
1500
1000
500
0
904 €
190 €
158 €
1,252 €
225m2
kWh
40 W/m
Heating demand at design temp 9kW
Internal gains 5625kWh/year
Solar gains 4500kWh/year
Jan
Indoor design temperature Outdoor design temperature Heating distribution Heating design flow temp Feb
Mar
Apr
May Jun
jul
Aug
Electric tariff rate Mains gas tariff rate Oil tariff rate LPG tariff rate 17.3 Ct/kWh
6.0 Ct/kWh
9.9 Ct/kWh
kW
13.1 Ct/kWh
As of 15th June 2014. Source: www.SEAI.ie
10
9
8
7
6
5
4
3
2
1
0
Space Heating Domestic Hot Water Enviroment
energy
Circulating
Pump Heating Comparison
of running Price
costs
in
Price in
Cent/kWh
Efficiency
[%] Total Per Annum -1
3
6000
100
4000100
3000100
2000
100
1000
100
kW
0
Aquarea
Heat pump
Comparison of CO2 Emissions
kg/year
RENEWABLE
ENERGY
7
11
* Calculations generated using
Panasonic’s Aquarea Designer
software, available from the
PRO Club website
(www.panasonicproclub.com).
Oil
Gas
LPG
•
•
•
•
•
•
•
•
Air to Water Heat Pumps
Geothermal Systems
Solar Thermal
Solar Photovoltaic
Solar Thermodynamic
Bio Mass & Wood Pellet Boilers
Wood Only Stoves
Waste Water Harvesting
The next generation of solar
technology providing up to 100% of
our domestic hot water even without
direct sun light absorbing the heat from
the air, wind and rain both day and
night. An ecological fluid refrigerant
circulates through the panel carrying
heat to the heat exchanger coil heating
water up to 50oC.
Solar Photovoltaic
Solar PV systems use both direct
and ambient sunlight to generate
electricity. SolarWorld PV systems
include on-roof or in-roof solutions
suitable for pitched roofs with an
incline of between 15o& 60o. Fast and
straightforward installation is a key
feature of this system and there are
versions designed specifically
for slate or tile roofs.
Electr.
Direct
Comparison of CO2 Savings
Comparison
of CO emissions
kg / year 2
18000
16000
14000
12000
10000
8000
6000
4000
2000
0
€1,252
Outdoor temperature (ºC)
Additional energy
1252
2569
3985
4916
5413
5000
90
1252
2568 85
3985 90
4916
5413100
€904
€190
€158
Additional Total Costs
Costs €/yr
€/year
Efficiency Additional Total costs
478
in €/year
Heatpence/
Pump
[%]
costs in
kWh
Mains Gas Boiler €/year
6
Heat pump
100
9.9
Mains gas boilerOil Boiler
6.5
90
100
Oil boiler
1001
LPG9.9Boiler 85
13.
LPG boiler
13.1
90
100
17.3
Direct electric Direct
16.6Electric
100
100
Dec
Drive energy
Comparison of Running Costs
Type of heating
Nov
Annual Running Cost of Heat Pump
Aquarea energy coverage
Heating Type
Operational costs
Oct
Solar hot water heating systems
can deliver up to 70% of the hot
water requirements for an average
household and Heat Merchants
can specify and supply flat panel
or evacuated tube systems from
Firebird, Kingspan and Joule plus all
ancillary products for a completely
integrated system.
Solar Thermodynamic
Hot water
Heating
Tariff Data
Sep
+210C
-1.80C
Underfloor
350C
Solar Thermal
Comparison of CO2 savings
14000
12000
10000
kg/year
8000
6000
4000
2000
Aquarea
Heat pump
12 | Heat Merchants
0
Oil
Gas
Electr. Direct
Oil
Gas
Electr. Direct
Renewable Energy | 13
Underfloor Heating
Heat Merchants can design and supply
underfloor heating systems to the residential,
commercial and industrial sectors. Our
expertise lies in project planning and our team
of design engineers, CAD technicians and
system specialists will design a quality system
which will provide maximum efficiency and
comfort for any new build or retrofit.
Heating distribution systems
Heating distribution systems
Sirius Aluminium Radiators
Sirius die cast aluminium radiators are ideally
suited for pairing with heat pumps, solar systems
and condensing boilers as they are an efficient
heat emitter using the lower temperature water.
The Sirius range is light weight, have a low water
content and a quicker heat up time for increased
efficiency and effectiveness.
Underfloor heating works efficiently with all heat sources
but is particularity suitable for use with lower temperature
water from heat pumps. Comfort is a key benefit of
underfloor heating which can provide for individual
or multiple room temperature control and provides a
uniform temperature throughout the room. It also assists in
elimination of moisture and damp, reduces dust mites and
allergens and increases room space by eliminating the need
for radiators.
Manufactured in Italy for Heat Merchants by
one of Europe’s leading Aluminium Radiator
companies, the stylish, aesthetic finish coupled
with the range of heights and lengths ensure
the Sirius will suit both new build and retrofit
applications.
Polycomfort Mat Panel (Wet) System
This mat panel system can accommodate 14x2
or 16x2mm pipe and can be easily adapted to
any size and geometry of room. The user friendly
contour of the panel and overlapping press stud
system allows for a fast, secure and efficient
install of the underfloor heat piping. It meets all
standard acoustic insulation, thermal insulation,
thermal performance and fire protection
requirements. Suitable for use with cement,
self-leveling and thin-bed screed.
Tube Holding Bar Rail (Wet) System
Under floor heating pipe is secured to the subfloor in a predetermined piping pattern prior to
pouring of the screed. Initially the floor is covered
with insulation sheeting and the rail holding bars
are placed at approximately 1m intervals on top
of the insulation. The rail and other sections
of the piping are held in place through the use
of staples. As with Polycomfort this system is
suitable for use with cement, self-leveling and
thin-bed screed.
Heatrack Wooden Panel (Dry) System
This patented concrete free underfloor heating
system features 1.22m long 12mm thick panels
backed with aluminium. They are neat, fast
and easy to install and are ideal for new builds
and retrofit applications as they can work
with all floor surfaces. Heatrack responds to
temperature change quicker than concrete,
uses lower temperature water and has
reduced energy costs in comparison to other
underfloor heating systems.
14 | Heat Merchants
Sirius Aluminium Radiators Output Charts
Sirius Aluminium Radiator 500mm
Product Code Description
U60708 Sirius 500mm 5 Section
U60709 Sirius 500mm 6 Section U60710 Sirius 500mm 8 Section U60711 Sirius 500mm 10 Section U60712 Sirius 500mm 12 Section U60713 Sirius 500mm 14 Section Length Columns (mm)
400
5
480
6
640
8
800
10
960
12
1120
14
ΔT
22.50C (W)
217
260
347
434
521
607
ΔT
500C (W)
615
738
984
1230
1476
1722
Per section: water capacity 0.44 litre, weight 1.4kg, operating pressure 6 Bar, max operating temperature 120oC
Dimensions (per section) - Height 570mm, Width 80mm, Depth 97mm, Pipe Centres 500mm (top to bottom)
70mm off the wall to the pipe centres.
Sirius Aluminium Radiator 600mm
Product Code Description
U60714
U60715
U60716
Sirius 600mm 8 Section Sirius 600mm 10 Section Sirius 600mm 14 Section Length Columns (mm)
640
800
1120
8
10
14
ΔT
22.50C (W)
ΔT
500C (W)
389
487
682
1104
1380
1932
Per section: water capacity 0.52 litre, weight 1.64kg, max operating pressure 6 Bar, max operating temperature 120oC
Dimensions (per section) - Height 670mm, Width 80mm, Depth 97mm, Pipe Centres 600mm (top to bottom)
70mm off the wall to the pipe centres.
Ancillary Products
U60717
U60718
U60719
U60720
Sirius Alu Rad Vent & Plug Kit
Sirius Alu Rad Universal Bracket Kit
Sirius Plastic Key
Sirius Universal Key Handle
U60721
U60722
U60723
U60724
Sirius Key 80cm Bar
Sirius White Touch Up Paint
Sirius 1” Joint Nipple
Sirius 1” Joint Gasket
Renewable Energy | 15
Have a Query?
Call our Customer Support Centre
090 6442300 or email
[email protected]
Contact Us
Visit www.heatmerchant.ie for contact details and branch address.
Customer Support Centre 090 6442300
Eamonn Kent
National Renewable Development Manager
087 2628868 • [email protected]
LETTERKENNY
SLIGO
DUNDALK
DROGHEDA
NAVAN
GALWAY
MULLINGAR
ATHLONE
DUBLIN
NAAS
BRAY
DUBLIN
BALDOYLE
FINGLAS
DEANSGRANGE
ENNIS
FONTHILL
NENAGH
ARKLOW
CARLOW
LIMERICK
CORK
SWORDS
WEXFORD
TRALEE
DUNGARVAN
SANDYFORD
TALLAGHT
KILKENNY
CLONMEL
RIALTO
WATERFORD
CORK
BLACKPOOL
TURNERS CROSS
>11 showrooms nationwide
>Award winning bathroom brands
>1st quality tiles sourced exclusively from Italy & Spain
> After hours and in home consultations
> 100% Irish owned
16 | Heat Merchants
www.tubstiles.ie • [email protected]
T: 090 6442300