.223/5.56x45–LPSP

.223/5.56x45–LPSP
.223/5.56x45 – LPSP
Limited Penetration Solid Point
.223/5.56x45 - LPSP.
Limited Penetration Solid Point.
No plastic tips to contaminate the target
or hinder barrier penetration. The bullet
on impact with a hard target will lose
10% of its mass but still retain trajectory.
A solid closed tip, 2 piece projectile,
designed to offer reliable penetration.
Primarily for lightly protected targets,
with the ability to punch through
glass and barriers and retain
mass but still offer some
degree of expansion.
Projectile Weights Grains -60gr nominal
Projectile Weights Grams - 4 grams nominal
Suitable Twist Rate - TW 7-9
Projectile Material - Copper Alloy. Separate Copper Alloy Tip
Case Material - CuZn alloy
Temperature Range -65° to +160°F/-54° to +71°C
Accuracy - Average Mean Radius @100yd/100m ≤ 1 MOA≤ 29mm Radius
Cartridge External Dimensions - NATO/SAAMI/CIP/ Compliant or as Required
Test Barrel Length -20”/500mm
Mean Chamber Pressure - 4450 bar EPVAT. 4300 bar SAMMI. 4030 bar CIP.
Average Velocity - @Ambient 21º C. 70º F. - 2950fps/905m/s
Average BC - 0.31 Calculated on G1 Model
Made in the UK by EPA Manufacturing Ltd
Sales Contact +44 (0)1777 871310
[email protected] www.sniperextreme.com
LPSP Projectile
.223/5.56x45–LPSP
LPSP - Limited Penetration
Solid Point
Technical Specification
Projectile Tip / Sabot Material Composition
Cu ~ 61 - 63%
Zn ~ 30%
Pb ~ 1.70 - 2.80%
Cartridge Case
Projectile Mechanical Properties
Tensile Strength (MPa) 20-30
Hardness HB 70
Case Material Composition
Cu ~ 70.0-73.0%
Zn ~ 20%
Pb ~ 0.07%
Fe ~ 0.05%
Small Rifle Primer
Cup Material ~ 70/30% Brass-Nickel Plated
Anvil ~ 70/30% Brass
Disc ~ Paper
Detonation Mix ~ Non Corrosive . Non Mercuric. Based on Lead Styphnate
LPSP Tip
Complete Round
LPSP Sabot
Primer Makeup
Made in the UK by EPA Manufacturing Ltd
Sales Contact +44 (0)1777 871310
[email protected] www.sniperextreme.com