50BMG 12.7 x 99mm EBB

.50BMG
12.7 x 99mm EBB
Enhanced Barrier Bullet
Enhanced Barrier Bullet
A CNC turned monolithic solid that is
very accurate at all ranges. It is very
effective for targets behind barriers,
with enhanced performance and
predictability. The round is capable
of defeating light to medium armour,
and maintain the original trajectory.
A measured Ballistic Coefficient
of 0.9565 for the .50BMG means
the bullet is supersonic to almost
1800 meters. Allowing reliable
engagement of targets beyond two
kilometres.
Accuracy is assured, even at extended
engagement distances, it will allow
the operator to increase his ballistic
advantage.
Projectile Weights Grains - 770gr Nominal
Projectile Weights Grams - 50 Grams Nominal
Suitable Twist Rate - TW 15
Projectile Material - Copper Alloy
Case Material - Cartridge Brass (Cu 70. Zn 30)
Temperature Range -65° to +160°F / -54° to +71°C
Accuracy - Average Mean Radius @100yd/100m ≤1MOA ≤29mm Radius
Cartridge External Dimensions - NATO / CIP compliant or as required
Test Barrel Length - 36” / 900mm. TW 15
Mean Chamber Pressure - 4450 bar EPVAT. 3700 bar CIP.
Average Velocity - Ambient 21º C. 70º F. 2756fps / 840mps
Average BC - 0.966 Measured G1 Model. 0.4790 Measured G7 Model
Made in the UK by EPA Manufacturing Ltd
Sales Contact +44 (0)1777 871310
[email protected] www.sniperextreme.com
12.7 Solid Projectile
.50BMG
12.7 x 99mm EBB
Enhanced Barrier Bullet
Technical Specification
Cartridge Case
Projectile Material Composition
Cu ~ 61 - 63%
Zn ~ 30%
Pb ~ 1.70 - 2.80%
Solid EBB Projectile Mechanical Properties
Tensile Strength (MPa) ~ 340 - 480
Hardness HB ~ 130
Case Material Composition
Cu ~ 70.0-73.0%
Zn ~ 20%
Pb ~ 0.07%
Fe ~ 0.05%
.50 BMG Primer
Cup Material ~ 70/30% Brass-Nickel Plated
Anvil ~ 70/30% Brass
Disc ~ Paper
Complete Round
Detonation Mix ~ Non Corrosive . Non Mercuric. Based on Lead Styphnate
.50 BMG Primer
Made in the UK by EPA Manufacturing Ltd
Sales Contact +44 (0)1777 871310
[email protected] www.sniperextreme.com