Brochure - Orange Coast Rebuilding, Inc.

WESTERN STATES FOREMOST MACHINE TOOL REBUILDER
Orange Coast
Rebuilding, Inc.
Rebuilding
Field Service
Remanufacturing
13,000 square foot rebuild facility with high ceilings and overhead cranes.
Services Provided By
Orange Coast Rebuilding, Inc.
Rebuilding/Remanufacturing of:
CNC Retrofitting
Precision Hand Scraping & Slydway Material Replacement
■ Lathes
■ Machining/Turning Centers
■ Grinders
Orange Coast Rebuilding, Inc.
4616 E. La Palma Avenue
Anaheim, CA 92807
Tel. (714) 777-5900
(800) 773-1909
■ Vertical/Horizontal Boring Mills
■ Mechanical/Electrical Repair Service
■ Jig Borers
FAX (714) 777-5673
■ CNC Retrofitting
Website: OrangeCoastRebuilding.com
■ Laser Alignment Service
Dedicated to Providing the Best In Service and Quality
12
Remanufacturing
Mills Horizontal or Vertical
Machining Centers
■ Kearney & Trecker
Horizontal or Vertical
■ Cincinnati
■ Devlieg
■ Mazak
■ Bridgeport
■ Cincinnati
■ Mori-Seki
■ Tree
■ Pratt & Whitney
■ Hitachi-Seki
■ Excello
■ Kearney & Trecker ■ Okuma
■ G & L
■ Amura-Seki
Lathes
CNC or Conventional
Grinders
■ Axelson
■ Mazak
■ Surface
■ American
■ Okuma
■ Centerless
■ Monarch
■ Hitachi-Seki
■ Tool & Cutter
■ Cincinnati
■ H.E.S.
■ Cylindrical ID-OD
■ Hardinge
■ Mori-Seki
(Most makes and models)
reasons why you get more with
orange coast rebuilding:
1.
Disassembly: Upon arrival at our plant, your machine is completely disassembled to bare castings.
2.
CLEANING: All castings are thoroughly cleaned and sanded to remove old paint. Castings are then filled and primed
with a protective paint.
3.
REPLACEMENT PARTS: All parts which affect the operating integrity of the machine are carefully examined to determine whether to rebuild or replace them.
4.
BEARINGS, BUSHINGS AND SEALS: To insure original accuracies and long productive machine life, all bearings,
bushings, seals, etc. are replaced.
5.
HYDRAULICS: Hydraulic systems will be completely disassembled and cleaned. All worn valves, spools, cylinders and
pumps will be rebuilt or replaced. All filters, packings and seals will be replaced.
6.
SPINDLES: All spindles are completely disassembled, reground, lapped or machined accordingly to bring them back to
original tolerances. New bearings and seals are fit to the assembly.
7.
SCREWS, NUTS, SHAFTS: All positioning, feed and motion screws and shafts are checked for wear and rebuilt or
replaced.
8.
LUBRICATION: The lubrication system will be thoroughly cleaned and checked. All defective gauges, meters and oilers will be replaced.
9.
ELECTRICAL CABINETS: All relays, magnetics, motor starters and controls are rebuilt. All push buttons, switches,
conduits, fittings and wiring are checked and replaced as required. All electric motors are rebuilt.
10. WAY SURFACES: All hardened and ground ways are reground flat and parallel. All scraped surfaces are plugged to
repair scratches, hand scraped and fit to restore original machine geometry.
11. PAINTING: Machine casting surfaces will be filled and sanded. Machine will then be painted with the customer’s
desired color and paint preference.
■ Thread
12. INSPECTION: Upon final assembly of machine, all functions are tested by Orange Coast technicians. Final accuracy
and alignments are checked to see that they either meet or exceed original manufacturer’s specifications.
Jig Borers
■ Pratt & Whitney ■ Sip
Boring Mills
Horizontal
Vertical
■ G & L
■G&L
■ Lucas
■ Bullard
■ Wotan
■ Scheiss
■ Union
■ Gray
■ De Fum
■ Berthiez
■ Moore
■ Dixi
■ Fosdix
For additional information on
remanufacturing, rebuilding and
retrofitting, call:
800.773.1909
714.777.5900
And the orange coast rebuilding
Job doesn’t stop here!
Documentation: Complete sets of prints, manuals
and operating instructions provided in the case of machine
retrofitting or with remanufacturing updates.
Delivery & Installation: Orange Coast provides
complete turnkey packages upon request for removal and
installation of your machine, including disassembly, rigging,
transportation and reassembly in your plant.
warranty: Orange Coast provides a full year warranty
on all parts and service provided during the rebuild.
service: We are proud to assure the customer that in the
unlikely event of any trouble after rebuild, we guarantee field
service within 48 hours of your call.
As California’s largest and foremost machine tool rebuilder, serving the metal working
community for over 25 years, Orange Coast’s goal has been to provide the best service
and quality to its customers. Every rebuild, remanufacture and retrofit meets or exceeds
OEM tolerances.