SWITCHES Selection Guide
Transcription
SWITCHES Selection Guide
SWITCHES Selection Guide DETECTION TACTILE SWITCH SWITCH DIP ROCKER & SWITCH Detection Switch V size (Miniature) Clasification Unsealed Characteristic D3V Family Appearance and Dimensions (mm) Features Contact Rating Contact Form 10.3 Electrical durability (operations min.) Mounting pitch (mm) Sealed V 27.8 10.3 15.9 Unsealed D2VW 27.8 15.9 10.3 SS 33 6.4 D3M 6.4 19.8 10.2 15.9 SS-P 11 29.2 19.8 9.5 • Subminiature snap action switch • Simple structure by using single leaf moveable spring • Flux resistance assured by inserted molded case • Easy wiring through connector • Flexible switch mounting by availability of 2 directions of external actuator 21/16/11/6 A @125/250 VAC 0.1 A@125 VAC 15/10 A@250 VAC 0.1 A@125 VAC 5 A@125/250 VAC 3 A@125 VAC 0.1 A@30 VDC 0.1 A@30 VDC SPDT, SPST-NC, SPST-NO SPDT, SPST-NC, SPST-NO SPDT (SPST-NC, SPDT (SPST-NC, SPDT SPST-NO per request) SPST-NO per request) 10.1 A@250 VAC 3 A@250 VAC 0.1 A@30 VDC SPST-NC, SPST-NO 100gf, 200gf or 400gf 200gf 100gf or 200gf 25gf, 50gf, 150gf 153gf 153gf 10,000,000 operations min. 50,000,000 operations min. 10,000,000 operations min. SS-10: 10,000,000 SS-5, SS-01: 30,000,000 operations min. 1,000,000 operations min. 500,000 operations min. D3V-21: 50,000 D3V-16: 100,000 D3V-11: 200,000 D3V-6/0.1: 500,000 V-15G: 100,000 V-10G: 300,000 0.1 A, 125 VAC: 1,000,000 3 A, 125/250 VAC: 100,000 SS-10: 50,000 SS-3P: 70,000 SS-5, SS-01: 200,000 SS-01P: 200,000 200,000 10.3 x 22.2 10.3 x 22.2 (0.41 x 0.87) 10.3 x 22.2 (0.41 x 0.87) 9.5 9.5 solder solder solder quick connect quick connect lead wire 9.5 Actuator types Terminal choices Approved Safety Standards RoHS 2 7 10 • High reliable min• Subminiature snap • Miniature snap action iature snap action • Miniature snap action action switch switch switch switch • Split double springs • Wide range variation • Availabe in Thermo• Sealed water-tight mechanism for long plastic and Thermofrom 0.1 A to 21 A switch conforms to life up to 30 million • Internaly or externaly setting resin housing IP67 times operations type fitted levers • Internal lever option Operating Force 25gf, 50gf, 100gf, (OF) 125gf, 200gf *for pin plunger type Mechanical durability S size (Subminiature) solder solder quick connect quick connect PCB PCB Dipole XA Connector UL, CSA, VDE UL, CSA, (VDE) (UL, CSA, VDE) UL, CSA, VDE UL, CSA, VDE UL, CSA, TÜV Compliant Compliant Compliant Compliant Compliant Compliant Detection Switch Clasification S size (Subminiature) Characteristic Sealed Family D2SW-P J size (Ultra subminiature) Unsealed D2F 6.4 Appearance and Dimensions (mm) Features Contact Rating Contact Form 11 19.8 5.7 Sealed D2FS D2FD 6 5.8 12.7 6.5 6.5 • Suitable for low • Ultra Subminiature frequency long life • Sealed subminiature snap action switch use tools basic switch con• Inserted molded • Simple structure forms to IP67 telminals to prevents by using single leaf • Simple structure flux penetetration moveable spring by using single leaf • Wide terminal varia• Wide variations of movable spring tions terminals 5.3 5.3 9.3 12.8 13.3 13.3 • Sealed switch con• Dust proof switch forms to IP67 conforms to IP6X • Simple structure with • Extra long stroke a single leaf movable (OT: 1.4mm) even without lever spring • Sealed switch conforms to IP67 • Extra long stroke (OT: 2.7mm) even without lever • High reliable slide contacts 0.1 A@6 VDC 0.1 A@125 VAC /30 VDC 2 A@125 VAC /30 VDC 2 A@12 VDC 0.1 A@30 VDC 10 mA@14 VDC SPST-NO SPDT • SPDT • SPST-NC, SPST-NO SPST-NO (lead wire model only) 75gf 150gf 87gf 204gf 76gf 153gf 0.1 A@30 VDC 3 A@125 VAC 1 A@125 VAC • SPDT • SPST-NC, SPDT SPST-NO (lead wire model only) Operating Force (OF) 183gf *for pin plunger type D2QW 6.5 8.2 12.8 2 A@250 VAC 0.1 A@125 VAC D2HW Mechanical durability 1,000,000 operations min. 1,000,000 operations min. 100,000 operations min 300,000 operations min. 1,000,000 operations min. 500,000 operations min. Electrical durability (operations min.) 2 A: 50,000 or 0.1 A: 200,000 30,000 (OT: full stroke) 10,000 D2FD-01: 100,000 D2FD-2: 30,000 100,000 0.1 A: 200,000 10 mA: 500,000 9.5 6.5 (0.26) — 4.8 — 8.3 Mounting pitch (mm) Actuator types Terminal choices solder solder quick connect PCB (straight /angled) PCB lead wire Approved Safety Standards RoHS solder PCB (straight /angled) solder PCB self-cliching PCB self-cliching PCB solder PCB (straight /angled) PCB lead wire (UL, CSA, VDE) (UL, CSA) — — (UL, CSA) — Compliant Compliant Compliant Compliant Compliant Compliant 3 Detection Switch Clasification SMT Door Switch Characteristic Unsealed Unsealed D3SK Family Appearance and Dimensions (mm) Features Contact Rating Contact Form Electrical durability (operations min.) Mounting pitch (mm) D3D 5.4 4.95 3 0.9 3 D3DC 15 11 17 14.1 0.9 26.3 36.4 • Smallest detection switch in the • Smallest detection switch in world the industry with high precision • A unique mechanism enables operation high contact reliability and high (*Omron data as of April 2008) precision operation • Long stroke for easy intallation is • Horizontal 2-way detection and available long stroke • Disconnectable crimp connector for easy wiring • Long stroke (9 mm for plunger model) • 2 colors (black and white) variation available • Small size • Crimp connector for easy wiring • Long stroke (7 mm for plunger model) • 2 colors (black and white) variation available 1 mA@5 VDC 1 mA@5 VDC 1 A@125 VAC 0.5 A@250 VAC 0.1 A@30 VDC — — SPDT, SPST-NC, SPST-NO SPST-NC, SPST-NO 24gf 204gf 102gf 150,000 operations min. 150,000 operations min. 300,000 operations min. 100,000 operations min. 100,000 100,000 100,000 100,000 — — Panel-mount — Operating Force (OF) 41gf *for pin plunger type Mechanical durability D3SH Actuator types PCB Terminal choices Approved Safety Standards RoHS 4 HL Connector PCB XA Connector — — UL,CSA, VDE UL,CSA Compliant Compliant Compliant Compliant Tactile Switch Standard Type Clasification Surface Mount Type (SMT) Characteristic Unsealed Sealed Family B3F B3W Unsealed B3FS B3U Appearance Size (mm) 6x6, 12x12 6x6, 12x12 Features • Wide range of models • Space saving switch with extended mechanical/electrical durability • Now available in two size: 6x6 • Sealed construction conforms and 12x12 (NEW) to IP67 • Two sizes available: 6x6mm and • Possible for reflow soldering • Tape packing available 12x12mm • Ultra small size to allow high density mounting on PCBs for mobile equipment • Dust proof construction provides high reliability in dusty environments Operating Force (OF) Various by type 160gf, 230gf (6x6 type) 200gf, 350gf (12x12 type) 100gf (General purpose) 150gf (High force) 153gf (top actuated) 162gf (side actuated) Contact Rating Resistive Load 50 mA@24 VDC 50 mA@24 VDC 50 mA@24 VDC 50 mA@12 VDC SPST-NO SPST-NO SPST-NO SPST-NO Durability Various by type (Please refer to specification sheet) 1,000,000 (B3W-1 OF: 160g) 300,000 (B3W-3 OF: 230g) 3,000,000 (B3W-4 OF: 200g) 1,000,000 (B3W-4 OF: 350g) 1,000,000 (B3FS-1 OF:100g) 300,000 (B3FS-1 OF: 150g) 100,000 (B3FS-1 OF: 260g) 200,000 operations min. (OF:153g) 100,000 operations min. (OF:162g) Terminal shape Dip Terminal/Radial taped type Dip Terminal SMT SMT None IP67 None IP60 Not possible Possible Not possible Not possible Bag, emboss taping Bag, emboss taping, special package Bag, emboss taping, special package Emboss taping Compliant Compliant Compliant Compliant Contact Form Water ingress protection Washing Packaging RoHS 6x6, 12x12 3x2.5 5 Tactile Switch Clasification Surface Mount Type (SMT) Long Stroke Type Illuminated Characteristic Sealed Unsealed Unsealed B3AL B3W-9 B3S Family B3SN B3SL 3.4mm Appearance 3.1mm 4.3mm 11mm 5mm 5.1mm Size (mm) 6x6 6x6 6x6 6.6x6.9 Features • Sealed construction conforms to IP67 • Available in embossed taping packages • Sealed construction conforms to IP67 • Using stainless-steel spring to provide a crisp clicking action • Sealed construction conforms to IP67 • Middle stroke with rubber plunger • Compact construction 2 LEDs ensure the bright• High operating force also ness and uniformity providing long durability • Three colors (Red, Green, (OF = 3.5 N {357 gf}, Orange) Durability = 1 million • Dust tight internal switch operations) mechanism Operating Force (OF) 160gf (General purpose) 230gf (High force) 160gf (standard type) 180gf (gold plated type) 200gf, 357gf 200gf, 250gf, 306gf, 357gf 160gf max. (Standard force) 230gf max. (High force) Contact Rating Resistive Load 50 mA@24 VDC 1 to 30 mA @5 to 24 VDC 1 to 50 mA @5 to 12 VDC 1 to 50 mA @5 to 16 VDC 50 mA@24 VDC SPST-NO SPST-NO SPST-NO SPST-NO SPST-NO 500,000 operations min. (OF:160g) 300,000 operations min. (OF 230g) 100,000 operations min. 100,000 operations min. 1,000,000 operations min 100,000 (OF: 160g) 30,000 (OF: 230g) Terminal shape SMT SMT SMT SMT Dip Terminal Water ingress protection IP67 IP67 IP67 None None Possible Possible Not possible Not possible Not possible Bag, emboss taping, special package Bag, emboss taping, special package Emboss taping Emboss taping Special package Compliant Compliant Compliant Compliant Compliant Contact Form Durability Washing Packaging RoHS 6 10x10, 12x12 Dip Switch Rocker Switch Clasification SMT Clasification Characteristic Slide types Characteristic A6S-H Family A6H A8L Family 5.6 Appearance Appearance Dimensions (mm) Varies by type Features • Straight PCB / Surface Mount type • Half pitch SMT • Reflow solder heat • Low profile of 1.55 mm resistance (peak up • Seal type models to 260°C) available • Seal tape models available Operating Force 30gf (OF) Contact Rating Resistive Load Varies by type 30gf A8GS 21 16.5 A8GS-T 6.8 30 15 17 28.5 6.9 30 22 28.5 Dimensions (mm) Features • Miniature size with • Miniature size inrush currents up to • Zero standby power • Miniature size • Rocker switch with by reset function 100 A Delay OFF function • High inrush-curent • Easy to mount by durability. Conform- • Zero standby power snap fitting by reset function • Contact gap of 3 mm ing to TV-8 rating (Inrush 117A) minimum 102±61gf 153±92gf 204±122gf 184±143gf 10 A@125 VAC, 250 VAC 16 A@125 VAC, 10 A@250 VAC 16 A@125 VAC, 10 A@250 VAC Operating Force 220±120gf (1pole) (OF) 400±250gf (2pole) Contact Rating 25 mA@24 VDC 25 mA@24 VDC 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 2, 4, 6, 8, 10 Plunger color Black Black Black Mechanical durability 1,000 operatios min. 1,000 operatios min. Contact form SPST, DPST SPST, DPST SPST, DPST Electrical durability 1,000 operatios min. 1,000 operatios min. Mechanical durability 50,000 operations min. 30,000 operations min. 30,000 operations min. Actuator types Flat, raised Flat Electrical durability 10,000 operations min. 10,000 operations min. 10,000 operations min. Terminal pitch 2.54mm 1.27mm max 100 A (under 8.3ms) 117 A — Washable Yes (seal type only) Yes (seal type only) Marking on Caps Packaging Stick, Emboss tape Stick, Emboss tape Approved UL, CSA, TÜV Safety Standards Compliant Compliant Number of poles RoHS Inrush current RoHS with and without with and without with and without marking are available marking are available marking are available Compliant UL, CSA, TÜV UL, CSA, TÜV Compliant Compliant 7 DETECTION DETECTION SWITCH BEST SELLER D3V Miniature Basic Switch RoHS Compliant Reliable Basic Switch with External Lever • Available in 21 A, 16 A, 11 A, 6 A and 0.1 A models, all with self-cleaning contacts. • Available with internally or externally fitted levers, and 2 fixing positions for external levers. Application example • Microwave Oven : Open door detection • Photocopy machine : Open tray detection • Washing Machine : ON/OFF Power switch, Water pressure detection Microwave Oven D2F Ultra Subminiature Basic Switch Photocopier RoHS Compliant Ultra Subminiature Basic Switch with Plenty of Terminal Variations • Incorporates a snapping mechanism made with two highly precise split springs that ensures long durability. • Uses insertion-molded terminals that prevents flux penetration. • In addition to self-clinching PCB, left-angled and right-angled terminals, 2 types of soldering terminals are available. Application example • Elevator : Operation switch • Electric Pot : ON/OFF Power switch • Low Voltage Circuit Breaker : Internal unit detection Elevator SS Subminiature Basic Switch Low Voltage Circuit Breaker Electric Pot RoHS Compliant Subminiature Basic Switch Offers High Reliability and Security • OMRON's best-selling micro switches are offered in a wide variety from 0.1 A to 10.1 A. • A variety of models are available, with operating force ranging from low to high. • Two split springs ensure a high stability and durability of 30,000,000 operations. Application example • Power Shutter : Limit detection • Electric Door Lock : Open/Closed door detection • Food Processor : Jar lock position detection 8 Linear Drive Electronic Door Lock Food Processor N SWITCH DETECTION SWITCH N E W D2FD Dust Proof Ultra Subminiature Basic Switch Ultra Subminiature and Dust Proof RoHS Compliant NEW • Sealing by using rubber packing means the switch can be used in dust-proof environments(IEC IP6X). • Switch rating of 2 A at 125 VAC possible with a single-leaf movable spring. Models for micro loads are also available. • Solder and PCB terminals are available. List of Models Terminals Actuators/Ratings Pin Plunger Hinge Lever Application example Solder 2 A D2FD-2L0-1H D2FD-2L0-1T 0.1 A D2FD-01L0-1H D2FD-01L0-1T 2 A D2FD-2L1-1H 0.1 A D2FD-01L1-1H Simulated Lever PCB 2 A D2FD-2L30-1H 0.1 A D2FD-01L30-1H • Vacuum cleaner : Floor surface detection • Air conditioner : Open/closed panel detection D2FD-2L11T D2FD-01L1-1T D2FD-2L301T Air conditioner D2FD-01L30-1T Vacuum cleaner D2FS Ultra Subminiature Basic Switch RoHS Compliant Simple Construction and High Reliability for Long Time NEW • Developed for a low number of operations during a long period of use such as door-detection to avoid sabotage on meters. • Simple construction with a single-leaf movable spring provides reasonable cost. • Self-clinching, right-angled and left-angled PCB terminals are also available. List of Models Actuators Application example Pin Plunger Hinge Lever PCB (Straight) D2FS-F-N D2FS-FL-N PCB (Self-clinching) D2FS-F-N-T D2FS-FL-N-T PCB (Right angled) D2FS-F-N-A D2FS-FL-N-A PCB (Left angled) D2FS-F-N-A1 D2FS-FL-N-A1 Terminals • Fire Alarm : Unit removal detection • Electric meter : Anti Tamper detection Fire Alarm Electric Meter 9 TACTILE TACTILE SWITCH BEST SELLER B3F Tactile Switch RoHS Compliant A Wide Range of Models : 6×6mm, 12×12mm, Side-Operated, High-Force, and Gold-Plated. • Extended mechanical/electrical durability : 10×106 operations for 12×12 mm type and 1×106 operations for the 6×6 mm type • Taped radial type, vertical type and high force types are available. • Gold plated models available for increased contact reliability, resistance to corrosive gas and insulation failure prevention for ion migration in harsh environments • Type B32 Key Tops are available for projected plunger models. Application example • Microwave Oven : Control Panel • Elevator : Operation button • X-ray Machine : Operation panel B3FS Tactile Switch(SMT) Microwave Oven Elevator RoHS Compliant Surface-Mounting Switches Ideal for High-Density Mounting • Tape packing style also available. • Allows reflow soldering. • 3 actuator heights for design flexibility; Projected plunger versions allow installation of B32-series keytops. Application example • Smart meter : Control Panel • Printer : Operation button • Factory machine : Control Panel B3W Sealed Tactile Switch Factory machine Printer RoHS Compliant Tactile Switch with Sealed Construction for Automatic Soldering • Sealed construction conforming to IP67 (IEC-60529) provides high reliability in locations exposed to dust or water. (*Excluding the terminal section.) • Available in two sizes : 6×6 mm and 12×12 mm. • Ground terminal available to protect against static electricity. • Projected plunger types that allow the installation of B32-series Special Key Tops are available. Application example • Washing Machine : Operation panel • Electric Toilet : Operation panel 10 Washing Machine Electric Toilet DIP/ROCK DIP/ROCKER SWITCH BEST SELLER A6S Slide DIP Switch(SMT) RoHS Compliant Previous (A6S) Model Upgraded to Surface-Mounting Type with Increased Solder Heat Resistance • Designed to enable replacement of previous(A6S)model, featuring the same dimensions and improved solder heat resistance(reflow peak solder temperature: 260°C). • Gold-plated twin contacts and a slide-type, self-cleaning mechanism ensure high reliability. • Washable models with seal tape available. • Embossed taping models available for automatic mounting.(Small reel also available) Application example • Semiconductor equipment : Control PCB(ON/OFF switching) • Security system : Control PCB A8L Miniature Rocker Switch Semiconductor equipment RoHS Compliant Miniature Rocker Switch for High Capacity Switching • Withstands inrush currents up to 100 A with a unique switching mechanism. • Soft touch with firm switching action. • Easy to mount by snap fitting. • Contact gap of 3 mm minimum. • UL and cUL standards approved. Conforms to EN standards. Application example • Printer : ON/OFF Power switch • MRI machine : ON/OFF Power switch MRI machine Printer N E W A8GS/A8GS-T Remote Reset Rocker Switch RoHS Compliant Please refer to the precautions One of the Smallest Rocker Switch with a Reset Function in Its Class NEW • Zero standby power due to Reset function. • High inrush-current durability. Conforming to TV-8 rating.(Inrush 117 A) • Model variation for Micro loads. • Model variation of micro load and high capacity combination.(DPST) It is able to operate micro load and high capacity load at the same time. • Contact gap of 3 mm minimum. • UL and cUL standard approved, Conforms to EN standards. • Model variation for 3.3 VDC circuit. Usage example Saving energy by cutting the standby power. Saving energy by automating shut down of the main power. Turning OFF main power by remote access. Turning OFF the main power of multiple equipment at the same time. Application example • Photocopier : ON/OFF Power switch • MRI machine : ON/OFF Power switch Photocopier 11 Customized Switches Omron can assist you in custom designing switch to meet your exact specifications. Choose from any number of options. FOR EXAMPLE... LEVER WIRE COLOR/LENGTH/GAUGE TERMINATION DETECTION SWITCHES TUBING KEYTOP HEIGHT COLOR SHAPE TACTILE SWITCHES What we can customize Detection switches Outline,Appearance Performance Tactile switches Wire color Lever shape Plunger height Wire length Terminal plating Plunger color Wire gauge Terminal bend * Keytop height Adding connector Terminal cut * Keytop color Characteristics * Electrical rating * Keytop shape Note: " * " means advanced customization, please consult Omron representative. For More Detalled Information... Visit Us Online: www.components.omron.com • Browse Omron’s full range of product information and selection guides. • Search the cross reference database to locate Omron component solutions. • Download PDF data sheets, brochures and more. • Locate a distributor and search for available inventory. • Complete Terms and Conditions of Sale and Usage, Call Us : 1-847-882-2288 Monday through Friday, 7:30 a.m. to 6:00 p.m.Central Time(CT) Email Us : [email protected] OMRON ELECTRONICS COMPONENTS LLC Cat. No. Y113a-E-01