life sciences instrumentation

Transcription

LIFE SCIENCES
INSTRUMENTATION
Low-Cost
Solutions
for
High
Te c h n o l o g y
Vol. 6, No. 1
Mini-Centrifuges
myFuge™ Mini by Benchmark Scientific
8 Position Microtube Rotor
With twice the capacity of most mini centrifuges, the myFuge instantly reaches 6,000 rpm
once the lid is closed and quickly stops once the lid is open. Models are ideal for personal
use or for quick spindowns of microtubes and PCR tubes. The unit comes with an installed
eight-position microtube rotor and the second PCR 0.2 ml rotor is conveniently stored in
the bottom compartment.
Small, silent and
powerful with an
8-position
microtube rotor
•
•
•
•
•
•
•
8-position microtube rotor for increased productivity
Capacity: 8 x 1.5 / 2.0 ml tubes; 16 x 0.2 ml PCR tubes; 2 x 0.2 ml PCR strips
Speed: 6000 rpm/2000 x g
Dimensions: 4.5"W x 5.9"D x 4.5"H
Electrical: 120 - 240V, 50/60 hz
Includes microtube rotor, PCR rotor, 0.5 ml & 0.2 ml adapters
View the online product page
Color
Red
Blue
Clear
Green
Purple
Cat. #
$/Each
BR04-05
BR04-06
BR04-07
BR04-08
BR04-09
218.00
218.00
218.00
218.00
218.00
CE Listed units
available in five colors
myFuge™ 12 Mini Centrifuge
StripSpin™ 12 Mini Centrifuge
Medilite™ Centrifuge
Ideal for quick spin-downs, the myFuge™ 12 by
Benchmark Scientific has a silent operation and a
lid-operated COMBI-Rotor that eliminates rotor
changes when switching between microtubes and
PCR Strips.
These silent and compact units by Benchmark
Scientific are ideal for quick spindowns of samples.
Units feature a lid-operated spinning rotor that
quickly spins samples at 5500 rpm when lid is
closed. Open the lid to begin deceleration.
High-performance and cost-effective units by
Thermo Scientific have safety features that protect
the user when performing routine, low-speed
applications of blood and urine separations.
• Capacity: 12 x 15/2.0 ml tubes; 32 x 0.2 ml tubes;
4 x PCR strips (8 x 0.2 ml)
• Speed Range: 5500 rpm/2000 x g
• Dimensions: 5.5"W x 7.9"D x 4.4"H
• View the online product page
• Capacity: 4 x PCR strips (8- or 12- position) or 48
x individual 0.2 ml PCR tubes
• Fixed speed: 5500 rpm/2000 x g
• View the online product page
•
•
•
•
•
•
12 x 15/2 ml Tubes Capacity
Cat. #
115V plug
2
BR15-00
4 x 12 Position PCR Strip Capacity
$/Each
293.00
115V plug
Cat. #
BR19-25
6-Place or 12-Place Rotor Capacity
$/Each
360.00
6-Place Rotor Capacity: 90 ml (6 x 15 ml)
12-Place Rotor Capacity: 120 ml (12 x 10 ml)
Max Speed: 3100/2700 rpm
Max RCF: 1228/920 x g
CE marked, CSA approved (select models)
6-Place Rotor Capacity
12-Place Rotor Capacity
Cat. #
$/Each
3615-71901.00
3615-731,006.00
Items with blue prices usually ship in 1–3 days. For current lead times: TerraUniversal.com
Benchtop and Free-Standing Centrifuges by Thermo Scientific
Heraeus™ Multifuge™ X3
3-Liter Capacity
The 3-liter Heraeus Multifuge X3 is ideal for high-throughput environments and takes up to 40% less benchtop
space. With nearly twice the capacity for standard tubes compared to same-sized centrifuges, these energy
saving models accommodate various swinging, fixed-angle and lightweight Fiberlite™ rotors.
• Features: 3-second rotor exchange; biocontainment solution; powersave; auto-correct detection
• Max Speed: 6000 to 15200 rpm (depending on rotor)
• Max RCF: 7164 to 25314 x g (depending on rotor)
Ventilated models have a low-profile design that
takes up to 40% less benchtop space compared
to other models.
Refrigerated models are ideal for temperature—
sensitive processes in high-performance
applications. CFC-free refrigeration systems have a
temperature range of -10° to +40°C.
View the online product page.
Select models are UL, CE, or CSA certified
120V Models
Benchtop Models
Dimensions (W" x D "x H")
Ventilated
Refrigerated
Floor-Standing Models
Ventilated
Refrigerated
Cat. #
$/Each
22.2 x 26.4 x 14.2
29.3 x 26.4 x 14.2
3618-71
3618-73
6,659.00
8,836.00
22.2 x 26.4 x 54.5
22.2 x 26.4 x 31.1
3618-75
3618-77
7,756.00
9,763.00
Transportable floor-standing model
with an ergonomic height of 31.1" for
easy reach of samples
Heraeus Multifuge X1
1-Liter Capacity
As the only 1-liter centrifuge capable of spinning 14
x 50 ml conical tubes in angle configuration at over
12000 xg, the energy-saving Multifuge X1 accepts
various swinging bucket, fixed-angle and lightweight
Fiberlite rotors. Features: 3-second rotor exchange;
biocontainment solution; powersave; and autocorrect detection.
•
•
•
•
•
Select models are UL, CE, or CSA certified
Max Speed/RCF: 15200 rpm/25999 x g;
Ventilated: 17.3"W x 23.8"D x 14.2"H
Refrigerated: 24.5"W x 23.8"L x 14.2"H
120V Models
Ventilated Refrigerated* * Model shown
Cat. #
Heraeus Megafuge™ 8
4 x 145 ml to 6 x 50 ml Capacity
This compact centrifuge accepts a wide variety of
swing-out and fixed-angle rotors ideal for clinical
and research applications. Features: 3-second rotor
exchange; biocontainment solution; powersave;
and auto-correct detection.
•
•
•
•
$/Each
1538-524,921.00
1538-54 6,900.00
Select models are UL, CE and IVD listed
Max Speed/RCF: 4500 rpm/ 3260 x g
Ventilated: 14.6"W x 18.9"D x 12.2"H
120V Models
Ventilated Cat. #
$/Each
1716-012,155.00
Heraeus Clinifuge™
12 x 15 ml Capacity
Ideal for clinical blood sample processing in small
labs and medical practices, units also display error
faults, an autoclavable rotor, and accepts a wide
range of adapters. Rotor chambers are completely
sealed during centrifugation and the brushless
motor eliminates replacement of carbon brushes.
•
•
•
•
CSA Certified
Max Speed/RCF: 5000 rpm /2600 x g
Dimension: 11.2"W x 14.8"D x 9.5"H
120V Models
Ventilated Cat. #
$/Each
1798-581,579.00
Blue Prices: items usually ship in 1–3 days. Order: 714-578-6100 Vol. 6 No. 1
3
Analytical and Precision Balances by Sartorius
Secura® Analytical Balances
Quintix® Analytical Balances
Practum® Analytical Balances
A great value for standard applications in busy
labs. Features: rugged weigh cell for reliable
results; sturdy draft shield, extra-large feet and upfront level indicator. Dimensions: 8.5"W x 14.1"D x
12.6"H. View the online product page.
Designed for daily lab routine, balances include
built-in applications for custom settings. Features:
isoCAL for accurate results, touchscreen, user
interface and data transfer. Dimensions: 8.5"W x
14.1"D x 12.6"H. View the online product page.
Units with integrated systems and safety features
are ideal in pharmaceutical applications. Features:
level control, password protection, USP min. sample
weight measurement and isoCAL. Dimensions: 8.5"W
x 14.1"D x 12.6"H. View the online product page.
Weighing Capacity
120 g
220 g
Weighing Capacity
120 g
220 g
Weighing Capacity
120 g
220 g
Cat. #
5701-18
5701-17
$/Each
1,559.00
1,856.00
Cubis® Ultra-Micro Balance
Cat. #
$/Each
5702-012,430.00
5702-022,754.00
Cubis Micro-Balance
Modular and configurable models are designed
for filter weighing, customized work flows and high
resolutions. For stringent compliance requirements:
Specs: dimensions: 9.4"W x 14"D x 3.5"H; semiautomatic leveling; readability: 0.0001 mg. View
the online product page.
for the smallest sample weighing, customized work
flows and high resolutions. For stringent compliance
requirements. Specs: dimensions: 9.4"W x 14"D x
3.5"H; semi-automatic leveling; readability: 0.0005 mg
(max). View the online product page.
2.1 g
Cat. #
$/Each
5701-0029,437.00
Entris® Analytical Balance
Cat. #
$/Each
5701-0218,144.00
Entris Precision Balance
Cat. #
$/Each
5702-033,159.00
5702-043,571.00
Cubis Semi Micro-Balance
for filter weighing, customized work flows
and high resolutions. For stringent compliance
requirements. Specs: dimensions: 9.8"W x 17.7"D
x 14"H; Integrated Ionizer; automatic Leveling;
readability: 0.01 mg. View the online product page.
Cat. #
$/Each
5701-0413,163.00
Entris Top-Loading Precision Balance
Models have built-in applications and function keys
for easy operation. Backlit display provides easy
viewing of controls. Specs: dimension: 9.1"W x
11.9"D x 13"H; weighing pan: 3.5" diam.; weighing
capacity: 60 g to 220 g.
User-friendly models have built-in applications and
function keys for easy operation. Backlit display
provides easy viewing of controls. Specs: 11.9"W
x 9.1"D x 5.4"H; weighing pan: 4.5" diam.; weighing
capacity: 150 g to 620 g.
Models have built-in applications and function
keys for easy operation. Backlit display provides
easy viewing of controls. Specs: dimension:
11.9"W x 9.1"D x 5.4"H; weighing pan: 7.1" X 7.1";
weighing capacity: 820 g to 8200 g.
Weighing Capacity
60g
Weighing Capacity
150g
Weighing Capacity
8200 g
4
Cat. #
$/Each
5702-841,073.00
Cat. #
$/Each
5702-86644.00
Cat. #
$/Each
5702-98787.00
Electronic and mechanical PipettEs by Sartorius
Ergonomic, High-Performance and Reliable
• Made with recyclable materials
• Wide range of styles and configurations meets diverse
requirements
• Color-coding for easy pipette and tip selection
• Ergonomic and lightweight pipettes reduce finger fatigue and
prevent Repetitive Strain Injury (RSI)
• Accessories: SafetySpace Filter Tips, Safe-Cone Filters;
Charging stands for eLINE and Picus
• Designed and manufactured in compliance with ISO 9001,
ISO 13485 and ISO 14001 quality and environmental
standards
• Two Year Manufacturer Warranty
Visit Laboratory-Equipment.com for complete ordering
selection of pipettes!
eLINE® Electronic Pipettes
Autoclavable pipettes are designed with a
comprehensive feature of pipetting modes that
streamline work stages. View online product page.
Picus Electronic Pipettes
Extremely lightweight and ergonomic models with
eight pipetting modes for handling various liquidhandling tasks. View online product page.
mLINE® Mechanical Pipettes
• DC-motor has built-in error control
• Optiload for perfect tip sealing and equal
constant force for multi-channel models
• Super Pipetting on 0.1 – 5 µl increases accuracy
and reduces contamination risk
• Effortless electronic tip ejection
• Autoclavable lower parts > 10 µl
• 9 speeds for aspiration and dispensing
• Memory saves 6 programs
• LCD-display and keypad for programming
• Chargeable when in use, includes AC adapter
• Lightest and smallest electronic pipette weighs
only 100 g (0.22 lbs.)
• Enhanced DC-motor for outstanding performance
• Micro DC-motor electronic brake quickly stops
the piston; ideal for serial dispensing
• Adjustment Wheel for one-handed volume
setting
• Autoclavable lower parts (select models)
• Electronic tip ejection and hot key
• Optional: plate tracker
• Extremely light pipetting and tip ejection
forces with a 12N pipetting force on 1000 µm
1-channel models
• Optiload for perfect tip sealing and equal
constant force for multi-channel models
• Secure and smooth volume setting locks prevent
accidental changes, ideal for clinical use
• Autoclavable without disassembly
• Multipacks available with pipettes, Optifit Tip
Tray and Linear Stand
Models shown (other sample ranges available from
0.1 – 1200 µl):
Models shows (other sample ranges available from
0.1 µl – 10 ml):
Models shown (other sample ranges available from
0.1 – 5000 µl):
Cat. #
$/Each
Single-Channel
5703-05558.00
50 – 1000 µl (5.0 µl increments)
Test Volume Inaccuracy
1000
0.40%
500
0.60%
100
1.50%
Eight-Channel
5703-10889.00
1200
0.50%
600
1.00%
120
2.50%
Twelve-Channel
5703-141,061.00
1200
0.50%
600
1.00%
120
2.50%
Cat. #
$/Each
Single-Channel
5702-45751.00
1000
0.40%
500
0.60%
100
1.50%
Eight-Channel
5702-511,247.00
1200
0.50%
600
1.00%
120
2.50%
Twelve-Channel
5702-551,579.00
1200
0.90%
600
1.00%
120
2.50%
Lightweight, autoclavable models prevent repetitive
strain injury (RSI) and are easy to sterilize without
disassembly. View online product page.
Cat. #
$/Each
Single-Channel
PP03-04254.00
200
0.60%
100
0.80%
20
2.00%
Eight-Channel
PP03-10651.00
300
0.60%
150
1.00%
30
2.00%
Twelve-Channel PP03-12776.00
300
0.60%
150
1.00%
50
2.00%
5
PCR Workstations by Terra Universal
Terra manufactures turnkey laminar flow Polymerase Chain Reaction (PCR)
Hoods with laminar flow HEPA filtering for cleanliness. The air-velocity
meter monitors air flow. These lightweight models are made with acrylic
or static-dissipative PVC panels. Models are available with a stainless steel
work surface. View the online product page.
• Portable, economical turnkey hood converts any benchtop surface into
a controlled PCR work station
• Safe UVC Disinfection Module with “exposure switch” to protect users
from harmful UV light
• Fully-enclosed environment keeps UV energy safely contained
during sterilization
• Samples and equipment introduced via large front sash
• Full-length front access shield enhances laminar flow when closed and
gives users complete access to samples and equipment when open.
It is held open, or safely closed during UV decontamination, with
magnetic latches
PCR Workstations
PCR Hood Material
Acrylic
Acrylic
Static-dissipative PVC
Static-dissipative PVC
Tempered Glass
Tempered Glass
Dimensions W" x D" x H"
36 x 24 x 30.25
48 x 24 x 30.25
36 x 24 x 30.25
48 x 24 x 30.25
36 x 24 x 30.25
48 x 24 x 30.25
Cat. #
1692-90
1692-91
1692-93
1692-94
1692-95
1692-96
$/Each
3,723.00
3,986.00
4,466.00
4,779.00
3,406.00
3,645.00
PCR Workstation (No. 1692-90) on a
polypropylene table (order separately)
Pipette Shelf
Material
Acrylic
Polypropylene
mLINE® Pipette Multipacks by Sartorius Ultra-Violet C Sanitizing Lamp
Cat. #
1692-99
1692-98
$/Each
162.00
162.00
Multipacks
Pipette 3-pack 10
Pipette 3-pack 20
Pipette 4-pack
Pipette 3+1 pack
Pipette 5-pack
Cat. #
PP03-20
PP03-21
PP03-22
PP03-23
PP03-24
$/Each
776.00
776.00
975.00
1,287.00
1,209.00
99+% kill rate for common bacteria and viruses
within 2 minutes!
Length
21"
33"
61"
Cat. #
3305-90
3305-91
3305-92
$/Each
426.00
471.00
594.00
Thermal Cycler by Benchmark Scientific
TC9639 Thermal Cycler
Ideal for medium- to high-throughput laboratories, the TC9639 Thermal Cycler makes it quick and easy for users to set
up programs and protocols. The large, full-color touch screen allows the creation of icons for most-used programs. The
program wizard guides users through protocol set-up in a single screen and allows for program edits and alphanumeric
naming of programs and folders. Condensation and evaporation of samples are prevented by the fully adjustable
heated lid. Units also feature programmable lid temperature and the lid automatically shuts off when the block
temperature is below 35°C. A proprietary algorithm with tight tolerances accurately controls heating and cooling of the
block. The multi-format block of the TC9639 eliminates the expense and need for multiple interchangeable blocks and
the model accepts 96 x 0.29ml tubes, a 96-well plate or 39 x 0.5 ml tubes. For high-throughput labs, the T5000-384 with
384-well block is available.
Cat. #
TC9639 US plug
BR19-43
TC9639 EU plug
BR19-44
T5000-384 US plug
BR19-46
T5000-384 EU plug
BR19-47
Provides consistent and reliable results
with unlimited program storage capability
6
$/Each
4,214.00
4,214.00
4,496.00
4,496.00
Thermal Cyclers by Analytik Jena
qTOWER Real-Time
Quantitative rapidPCR
Thermal Cycler
Sample Volume/Capacity
5 – 20 µL/96 in parallel
Units perform quantitative PCR runs
in less than 25 minutes compared
to 90 minutes for standard thermal
cycles. Amplifies reaction volumes of
just 5 µL. View the online product
page to see additional models.
Models with an open-platform design
accept individual reactions. Different
assays can be optimized with
minimum effort if combined with the
gradient function. View the online
product page for details.
•Up to 10x faster than conventional
cyclers
•qPCR with up to 96 samples in less
than 25 minutes
•Adjustable ramping rates from
0.1°C/sec up to 12°C/sec
•Fiber-optic system for high signal
intensities
•75% savings on reagents; reduces
reaction volumes down to 5 µL
•RoHS compliant and provides
sample protection with thermal
block
• Use with 0.2 ml tubes, 8 well strips
or 96-well microplates
• Optimized for volumes of 10 – 60 µl;
Ramping rates of up to 5.5°C/sec
• Patented high-performance optical
system with 10 years warranty
• Individual configuration with up to
6 different wavelength channels
• Selection of 12 high-resolution,
retrofitable color or FRET modules
• High-speed scan: 6 sec. for a 96well microplate
Cat. #
$/Each
1011-0822,817.00
SpeedCycler2
As the fastest available thermal cycler in the world, these compact, modular
units deliver extraordinary high heating (15°C/sec) and cooling (10°C/sec)
rates. Available in: LPR, LP, SPR and SO.
rapidPCR in less than 8 minutes
Self-Adapting-Container delivers outstanding heat transfer
Optimized for low reagent consumption (reduces running cost)
Thermal blocks made of sterling silver w/ gold layer
Portable user-interface HID-Pro 320; Reduced primer mismatching
Accommodates standard PCR and low-profile PCR consumables
View the online product page for complete product listing
Cat. #
96 LPR (96 x 20 µl), universal voltage (100-240 V model)1011-27
Cat. #
$/Each
qTOWER 2.0, 115 V
1011-6921,680.00
qTOWER 2.2, 115 V, with gradient function (max. 40°C) 1011-7022,822.00
FlexCycler2 PCR Thermal Cycler
Ultra High-Performance PCR Thermal Cycler
•
•
•
•
•
•
•
qTOWER 2.0/2.2 Standard
Real-Time PCR Thermal
Cycler
$/Each
Models have a large VGA Display and twin block modules with two
independently controllable blocks and heat lids. The multi-block modules
allow two different protocols to run at the same time.
•
•
•
•
•
•
•
Quick-X-Change block system adapts to different requirements
Maximum heating and cooling rate: 4.5°C/sec
Automatic block recognition and multi-block start and stop function
96-well and 48-well twin-block option with gradient function
High Performance Smart Lid for continuous optimal contact pressure
USB A and B port; GLP-compliant documentation of PCR runs
View the online product page to see available Block Modules
Base Unit with Block 96
Cat #
1011-63
$/Each
Call TUI
7,421.00
7
spectrophotometers
S800/S1200 Spectrawave
Visible Diode Array Spectrophotometers
Biowave DNA
UV/Vis Spectrophotometer
Specifically designed for life science applications, this powerful tool
determines nucleic acid purity and concentration, protein concentrations or
cell density measurements. It uses Gifford Optics for high energy throughout,
a Xenon light source for long lamp life and a large graphical display for ease of
use and data interpretation. Compatible with low-volume cuvettes. View the
online product page.
These compact, lightweight, easy-to-use instruments measure absorbance, %
transmission, absorbance ratio and concentration. The large backlit graphical
display of the S1200 enables viewing of wavelength scans, kinetic assays
(including slope calculation) and standard curves. Both models accept standard
10mm pathlength glass or plastic cuvettes; an adapter is available for 10, 12,
and 16mm test tubes. View the online product page.
Cat. #
Biowave DNA
Biowave DNA with printer
$/Each
5300-154,824.00
5300-165,348.00
LAMBA™ Bio+ Spectrophotometer by Perkin Elmer
S800 UV/Vis
S1200 UV/Vis
Cat. #
$/Each
5300-091,977.00
5300-102,418.00
LAMBDA XLS+ Spectrophotometer by Perkin Elmer
Designed for life-science laboratories, these compact units offer a full suite
of stored methods including DNA, RNA and Oligonucleotide calculations,
protein assays such as direct UV measurement, BCA, Biuret, Bradford and
Lowry. These spectrophotometers measure absorbance or concentration at
any wavelength. Results may be printed to an integrated high-quality printer or
stored and printed via SD flash memory card. View the online product page.
The LAMBDA XLS+ is designed for academic and industrial laboratories that
require dedicated instrument with a small footprint and extreme reliability
and sensitivity. It includes an easy-to-read display and comprehensive suite of
built-in application software; measurement modes include single- and multiwavelength modes, scanning kenetics, and concentration, with the ability to
store up to 90 methods for easy access. View the online product page.
Cat. # LAMBDA Bio+ with printer
LAMBDA Bio+ with SD Card
8
$/Each
5102-025,997.00
5102-035,902.00
LAMBDA XLS+ with printer LAMBDA XLS+ with SD card
Cat. #
$/Each
5102-00
5,712.00
5102-015,617.00
Analytical Instruments
CO 8000 Biowave Personal Cell Density Meter
(Colorimeter) by Biochrom®
CO 7500 Colorwave Educational Colorimeter by Biochrom
This small, portable colorimeter measures the density of E. coli and yeast
cells in suspension at 600 nm and provides readings comparable to
spectrophotometers. Ideal for use in research labs where cultures may be
grown in 200 ml to 5L-volume conical flasks, units also accept 10mm pathlength
cuvettes or tubes and may be used with Erlenmeyer side-arm flasks. Smooth
front surface resists spills and is easy to sterilize. Stores up to 99 results. View
the online product page.
Cat. #
$/Each
5300-06921.00
Designed with student use in mind, these models are ergonomic, rugged,
portable, and easy to operate. Models include a rotating filter-selection wheel.
Used in kenetics mode to study rates of reaction, the CO 7500 takes readings
every second for output and they accommodate standard 102 mm pathlength
cuvettes (min 400 µl required) or 16 mm dia. test tubes. Other tube adapters
and printers are available. View the online product page.
Filters: 440, 470, 490, 520, 580, 590 and 680 nm
Cat. # For AC power only
With Rechargeable Battery
$/Each
5300-00782.00
5300-01864.00
IB53000B DNA Horizontal
Electrophoresis Start-Up Kit
B57000B DNA Horizontal
IB94000B MAGELIN Vertical
by IBI Scientific
Contains the following quality IBI products: 70 mm
x 165 mm x 305 mm horizontal electrophoresis
system, 10X TAE buffer concentrate (1 L), 10X
TBE buffer concentrate (1 L), 6X loading dye
(5ml), and molecular biology-grade agarose (100
g). Gel size: 100 mm x 150 mm. View the online
product page.
by IBI Scientific
Contains the following qualify IBI products:
an 83 mm x 267 mm x 394 mm horizontal
electrophoresis system, 10X TAE buffer
concentrate (1 L), 10X TBE buffer concentrate (1 L),
6X loading dye (5 ml), and molecular biologygrade agarose (100 g). Gel size: 250 mm x 250 mm.
View the online product page.
by IBI Scientific
Contains the following quality IBI products: a
170 mm x 170 mm x 180 mm MAGELIN Protein
System, designed to run 10 x 10 cm cast-your-own
polyacrylamide gels or other pre-cast gels in a
dual running format. Includes 10X Tris-Glycine-SDS
running buffer (1 L), 2X protein loading dye (5 ml),
and Coomassie Blue stain (2 L). Gel size: 100 mm x
100 mm (hand cast). View the online product page.
Cat. #
$/Each
EE00-00435.00
Cat. #
$/Each
EE00-01588.00
Cat. #
EE00-02
$/Each
529.00
9
Shakers and Vortexers by Thermo Scientific
MaxQ™ 5000 Incubated & Refrigerated MaxQ 4450 Incubated Orbital Shaker
Chamber holds up to four 1 L flasks.
Floor Shakers
Foot pedal models for hands-free use
Incubated and refrigerated floor shakers have an
easy-access drain, unbalanced load sensor and
casters. View all analog and digital models.
• Dimensions: 41"W x 32"D x 41"H
• Orbit Diameter: 1"; Maximum Load: 75 lbs.
• Temp. Analog: 10°C above ambient to 50°C
• Temp Digital: 15°C above ambient to 50°C
These compact, orbital shakers have an optional
chiller to achieve temperature ranges from 20°C to
30°C. View all analog and digital models.
• Orbit Diameter: 0.75"
• Maximum Load: 35 lbs.
• Operating Temperature: 5°C above ambient
to 80°C
Floor Model, 120V
Incubated-Analog
Incubated-Digital
Refrigerated-Analog
Incubated-Refrigerated
Incubated, 120V
Analog
Digital
Analog w/Cooling Coil
Digital w/Cooling Coil
Cat. #
$/Each
5322-187,464.00
5322-199,019.00
5322-208,856.00
5322-2110,255.00
Cat. #
$/Each
5322-02
3,621.00
5322-03
3,590.00
5322-09
3,275.00
5322-103,754.00
MaxQ 4000 Incubated and
Refrigerated Orbital Shakers
Chamber holds up to six 2 L flasks
Units have three temperature ranges to fulfill various
application needs. View online page for complete list
of models.
• Dimensions: 22.5"W x 32"D x 22"H
• Orbit Diameter: 0.75"
• Maximum Load: 50 lbs.
• Operating temp: 10°C above amb. to 50°C
Model, 120V
Incubated-Analog
Incubated-Digital
Refrigerated-Analog
Refrigerated-Digital
Cat. #
$/Each
5322-044,507.00
5322-055,565.00
5322-065,906.00
5322-076,382.00
MaxQ 2000 Open-Air Platform Shakers
Compact Digital Mini Rotator
Accommodates 50 ml to 2 L flasks
Compact models with smooth and quiet
horizontal mixing can fit inside CO2 incubators and
refrigerators. View online product page.
Shakes four microplates in one run
For precise and accurate shaking of microplates,
units can be placed inside incubators (non-CO2)
and refrigerators. View online product page.
• Orbit Diameter: 0.75 in./Maximum Load: 35 lbs.
• Operating Temperature: 0 to 40°C, 20 to 80%
RH, non-condensing
•
•
•
•
• Dimensions: 9.8"W x 5"D x 13"H
• Orbit Diameter: 0.12"/Maximum load: 8.8 lbs.
• Operating Temp: 0° to 40°C and humidity
conditions from 20 to 80% non-condensing
120 V Models
Analog
Digital Model 120 V
50 – 300 rpm
Accommodates 3 platform sizes
Compact units can be used in refrigerators,
incubators and warm rooms. View all analog and
digital models.
10
Cat. #
$/Each
5322-001,488.00
5322-01
1,721.00
Dimensions: 10.9"W x 13"D x 5.1"H
Platform Dimensions: 9.8"W x 9.8"D
Orbit Diameter: 0.51"
Maximum Load: 8.81 lbs.
Cat. #
$/Each
5322-62832.00
Compact Digital Microplate Shaker
Speed Range
40 – 1100 rpm
Cat. #
$/Each
5322-90693.00
Shakers, Vortexers and Rockers by Benchmark Scientific
Orbi-Shaker™ MP Microplate Shaker
Incu-Shaker™ Shaking Incubators
115 – 240V Model
3 mm mixing orbit
115V Model
10 Liter
10 Liter (Refrigerated)
Mini (1 Liter)
Four microplate capacity
These cold room and incubator safe models are
optimized for thorough mixing of microplates and
PCR plates. View online product page.
Cat. #
BR09-13
$/Each
704.00
Mortexer™ Vortex Mixer
Eight microcentrifuge tube capacity
Compact, quiet units with a Multi-Head™ design
and spill-proof feature are cold room and incubator
compatible. View online product page.
115V Model
200 – 3400 rpm
Cat. #
BR01-00
$/ Each
209.00
BlotBoy™ 3-D Rockers
1 L and 10 L capacity
Ideal for cell cultures, units provide temperature
accuracy and uniformity. View optional MAGic
Clamp platforms and shelves.
Cat. #
BR13-00
BR13-29
BR13-02
$/Each
4,713.00
7,002.00
2,412.00
Multi-Therm™ Vortexer
6 x 50 ml – 96 x 0.2 ml capacity
Temperature-controlled models used with
interchangeable blocks hold a variety of tube sizes
and vessels. View online product page.
115 V Model
Heat/Cool (HC)
Heat (H)
Cat. #
BR14-02
BR14-00
$/ Each
2,179.00
1,633.00
BenchRocker™ 3-D Variable-Speed Rocker
3.5 Lb. load capacity; +/- 8° tilt angle
These incubator and cold room safe models
provide gentle and thorough mixing of gel trays,
boxes and other flat vessels. Models include
autoclavable flat mat. View online product page.
5 Lb. load capacity; 0° to ±30° variable
Incubator and cold room safe models with
adjustable tilt angle and rocking speed are ideal
for various biological and mixing applications.
View online product page.
115 V Model
12" x 12" platform
115 V Model
12" x 12" platform
Cat. #
$/ Each
BR02-01 343.00
Cat. #
BR19-17
$/ Each
629.00
Orbi-Shaker™ Orbital Shaker
5 x 1 L capacity
Includes a standard platform with a non-slip rubbercoated surface. View online page for MAGic Clamp
platforms and tube racks.
120 V Model
19 mm Orbit
50 ml Flask Clamp
2 L Flask Clamp
Cat. #
BR09-12
BR09-02
BR13-07
$/ Each
1,272.00
24.00
54.00
Incu-Mixer™ MP Heated Microplate
Vortexer
Accepts 40 mm-high microplate
Two or 4-plate units work as a multi-plate incubator
or vortexer. The heated lid minimizes evaporation
and condensation. View online product page.
115 V Model
4-Plate Capacity
Cat. #
BR15-05
$/ Each
1,814.00
Everlast™ 247 Heavy-Duty, Variable-Speed
Rocker
16 Lb. load capacity; 0° to ±20°, variable
Models have an adjustable speed and tilt angle,
built-in platform, and optional platforms. View
online product page for accessories.
115 V Model
16" x 12" platform
Cat. #
BR13-19
$/ Each
814.00
11
Cell Distruptors by Branson
Analog Model
Analog Sonifier® Cell Disruptor
Digital Sonifier® Cell Disruptor
• Fully automatic tuning optimizes performance under varying conditions and
stores frequency at end of each cycle
• Power output control matches power to the application
• Continuous or timed (0 – 15 minutes) operation
• Pulsed mode minimizes heating of sensitive samples
• Process range from 1 ml to over 500 ml per sample
• Power output meter monitors power and permit reproducibility
• Fully automatic tuning optimizes performance under varying conditions and
stores frequency at end of each cycle
• Digital features: Multiple modes of operation; Digital parameter setting with
valid parameter range checking; 20 user-programmed presets; 10-hour
digital timer; User I/O offers remote start/stop control and viewing settings
and values
• Self-diagnostics on start-up; Automatic end-of-cycle shutoff
Applications: Biological cell disruption / homogenization, emulsification,
purification of genetic material, dispersion, fine mixing, degassing
Applications: Cell disruption/ homogenization, nanoparticles, emulsification,
chip assay, cell lysing, processing DNA and proteins, purification of genetic
material, leaching and extraction, fine mixing, degassing
Versatile and suitable for a broad range of liquid processing
Compact and rugged, these analog models produce reliable results. Units
have constant horn amplitude at different energy levels with automatic
amplitude compensation.
Model 200 W
400 W
Tapered Horn
0.5"
0.5"
Cat. #
$/Each
2601-012,553.00
2601-022,869.00
For precise process control and parameter measurement
Programmable, compact and rugged units feature self-diagnostics, multiple
modes of operation, stored user programs and more. Amplitude of units is
adjustable from 10 – 100%.
Model
200 W
400 W
Cat. #
$/Each
2601-032,864.00
2601-043,159.00
Analog and Digital Models:
Includes: power supply, high-efficiency converter and standard 1/2" titanium horn suitable for many applications
View online product page: Analog Sonifier Cell Disruptor or Digital Sonifier Cell Disruptor
Accessories
Cup Horn for Digital and
Analog Models
Diam.
2"
3"
12
Cat. #
Microtips for Analog Sonifier
$/Each
2601-23906.00
2601-241,500.00
Double Stepped Microtip
Diam.
Intensity
1/8"
Very High
Tapered Microtips
1/8"
Ultra High
3/16"
Very High
1/4"
High
Microtips for Digital Sonifier
Cat. #
$/Each
2601-36463.00
2601-33306.00
2601-34306.00
2601-35306.00
Diam.
3/32"
3/16"
1/8"
1/4"
Cat. #
$/Each
2601-09399.00
2601-10393.00
2601-11399.00
2601-12399.00
Cell Distruptors by QSonica
Q55 Sonicator
•
•
•
•
Ideal for standard cell disruption and other small-volume applications
Compact unit to fit any laboratory work space
Simple and effective operation
Two processing options: thumb switched activated or continuous processing
The Q 55 is a compact and cost-effective unit that can easily fit most bench
top work spaces. Its simplified control system allows the user to choose
between thumb switch or continuous operation. The 55-watt, 20 kHz unit
effectively handles most small-volume applications including standard cell
disruption, emulsions creations, DNA shearing and homogenization.
Note: Includes generator, converter, 1/8" diameter probe, power cable and
wrench set.
Cat. # $/Each
Q700 Sonicator
• Ideal for nanoparticle dispersion, creating emulsions, cell lysis and
homogenization
• A large color LCD screen allows touch screen control and clearly displays all
operating parameters and options
• Operating parameters can be saved to memory and run with the touch of a button
The Q700 has features that enhance reproducibility and ensure sample-to-sample
consistency. Its state-of-the-art touch screen interface allows intuitive control and
a user-friendly experience. Full amplitude control from 1 – 100% enables greater
control over the probe’s intensity and provides the user with a high degree of
resolution to pinpoint the most efficient settings for processing samples.
Cat. # $/Each
5323-004,448.00
Q700 Sonica
5323-081,709.00
Q55 Sonica
Accessories
Sound Enclosure
Reduces noise level by 20 dBa
Securely holds Qsonica probe
or horn
Units compatible with accessories
except the Microplate Horn (has
own dedicated enclosure)
Includes internal support rod
and converter mounting system
Use with Q55
Two ports for coolant tubing or
temperature monitoring
Use with Q700
Interior walls line with waterresistant acoustical foam
Microtip Probes
Tip used
with
Processing
Volume
Tip
Diam.
Q55
Q55
Q55
Q700
Q700
Q700
25 – 500 ml
50 – 1000 ml
10 – 50 ml
0.2 – 5 ml
0.5 – 15 ml
5 – 50 ml
3/4"
1"
1/4"
1/16"
1/8"
1/4"
Cat. #
5323-09
5323-10
4435.00
5323-03
5323-04
5323-05
$/Each
268.00
199.00
199.00
273.00
230.00
230.00
Large Clamp Stand
Use with
Q55
Q700
Cat. #
$/Each
Dimensions 3.5"W x 13"D x 30.5"H Cat. #
$/Each
5323-06542.00
5323-1396.00
5323-0782.00
13
Wet Baths
myBath™ Digital Water Bath
by Benchmark Scientific
These compact models are made with high-efficiency
insulation, and they maintain temperature stability and
uniformity for heating reagents and samples. View online
product page.
•
•
•
•
•
•
•
Temperature Range: Ambient +5 to 100°C
4 L model includes racks for 1.5/2.0, 15 & 50 ml tubes
8 L and 12 L models include drains
4 L, 8 L, and 12 L units have removable gable
Digital controls to select and monitor water temperature
3-digit display shows temperature increments
Quik-CAL™ temperature calibration function (2 L models
use traditional calibration)
• Seamless, rust-resistant stainless-steel chamber with rounded
corners for easy cleaning
myBath Digital Water Bath Series, 115V
Liter Interior Dimensions
W" x D" x H"
Cat. #
2L
5.5 x 6 x 4
BR17-02
4L
5.3 x 9.4 x 5.5
BR17-00
8L
12.8 x 10.4 x 5.9
BR17-03
12 L
12.8 x 10.4 x 7.9
BR17-04
Refrigerated/Heating Circulator
by JULABO
Cryo-Compact Circulators BY JULABO
Working temperature: -20°C to 100°C
Models are used for external instrument integration
and for temperature applications directly in the bath.
View online product page for additional models.
• Circulating pump provides short heat-up and
cool-down times
• LED temperature display, resolution 0.1°C
• Keypad switches automatically to the actual
value; PID1 temperature control
• Adjustable high temperature cut-out / dryrunning protection
• Includes 2 barbed fittings and removable
venting grill
Temperature Range
-20 to 100°C
14
Cat. #
$/Each
2540-002,928.00
Working temperature: -40°C to +200°C
Compact models are designed to be stored side-byside with other units or directly under a fume hood.
View online product page for additional models
•
•
•
•
•
•
Ventilation air cooling
Maximum ambient temperature of +40°C
Heating capacity of 2 kW
Filling volume: 3.5 L
Wetted parts made of stainless steel or plastic
Temperature Range
-30 to 150°C
Cat. #
$/Each
2540-045,022.00
$/Each
458.00
723.00
705.00
836.00
Recirculating Coolers by JULABO
Working temperature: -25°C to +130°C
Cost-efficient, energy-saving models are suited
for any cooling requirement in labs or industrial
environments. View online product page for
additional models.
•
•
•
•
•
•
•
Cooling capacity up to 20 kW!
Splash-proof keypad; LED display
Alarm output and RS232 (select models)
Filling-level indicator and pressure indicator
Circulating pumps; Optional air or water cooling
Easy fill and drain tap readily accessible
All wetted parts made of stainless steel or high
grade plastic(except FC-T models)
Temperature Range
-20 to 40°C
Cat. #
$/Each
2540-135,201.00
ECHOtherm™ IC20 Digital, Electronic
Chilling/Heating Dry Baths by Torrey Pines Scientific
Compact and low-cost units chill and heat biological samples from
-10°C to 100°C without sample blocks. View online page for
product details.
•
•
•
•
•
•
•
•
•
Energy-efficient Peltier design
Control at ambient
Count down timer (up to 30 days) with alarm and Auto-Off
RS232 I/O port; built-in data logger; electronic calibration
Control software available for use with computer
Operates when hooked up to a vehicle lighter jack
12-volt DC operation. Requires no agency safety approvals
External power supply provided
UL, CSA and CE approved
Applications: General molecular biology, PCR sample prep.
hybridization
Temp. Range
-10°C to 100°C
-20°C to 100°C
No. of Blocks
1
1
Cat. #
$/Each
5005-00775.00
5005-01828.00
ECHOtherm Model IC22 Two-Position Electronic
These dual-block models will chill, heat or freeze two separate sets
of samples according to different temperature settings. View online
page for product details.
IC20: Compact models can be plugged to vehicle lighter jack
• 2 separate plates with 2 separate temperature protocols
• Sample blocks for 0.2, 0.5 and 1.5 ml centrifuge tubes, 96-well
and 384-well assay plates, 2 ml vials
• Control at room temperature and electronic calibration
• Two 30-day countdown timers with alarm
• UL, CSA and CE compliant
• Energy-efficient Peltier design
Applications: General molecular biology, PCR sample prep.
hybridization
Temp. Range
-10°C to 100°C
20°C to 100°C
No. of Blocks
2
2
Cat. #
$/Each
5005-041,459.00
5005-051,455.00
ECHOtherm Model SC25 Fully Programmable
Orbital Mixing
Ideal for busy high-throughput labs, these programmable models
are ideal for a broad range of applications. View online page for
product details.
•
•
•
•
•
•
•
IC22: 2 separate temperatures on separate plates—2 blocks
Orbital mixing from 200 to 1000 rpm
5-program memory; automatic program repeat from 1 – 99 times
Digital control to 1°C from -10°C to 100°C
Control at room temperature; Electronic calibration
12-volt DC operation. Universal power supply provided
UL, CSA, and CE compliant
Energy-efficient Peltier design
Applications: Storing enzyme or DNA libraries at workstation, enzyme
reactions and deactivations, unattended restriction digestions or
ligations at elevated and reduced temperatures
Temp. Range
-10°C to 100°C
20°C to 100°C
No. of Blocks
1
1
Cat. #
$/Each
5005-081,701.00
5005-091,777.00
SC25: Stores 5 programs with a 10-step program capacity
15
Hot Plates by Thermo Scientific
Remote Control Hot Plates
Operates outside fume hoods
Available in two sizes, these chemical-resistant units
have a remote unit that can be positioned up to five
feet from the hot plate. View online product page.
General Purpose Aluminum-Top
Hot Plates
Explosion-Proof SAFE-T HP6 Hot Plates
For routine lab applications
These affordable and durable hot plates maintain
uniform temperature with built-in thermostatic
temperature control. View online product page.
•
•
•
•
•
•
Material: Aluminum top
Heating Surface: 6.25" x 6.25"
Temp. Uniformity: ±2.4°C at 100°C
Baffle-vented welded stainless steel case
UL Listed
Temperature Range, 120V
°C
°F
38 – 371 100 – 700
Cat. #
4000-70 $/Each
Class I/Group D atmospheres
These sturdy, corrosion-resistant units are designed
with a sealed aluminum housing to contain and
protect controls. View online product page.
•
•
•
•
•
•
• Material: Porcelain-coated, stainless-steel top;
stainless-steel case
• Temperature Range: 150°C to 371°C
• Temperature Stability: ±5°C
• Temperature Uniformity: ±10°C (at 150°C)
• Isolated controls for operation in hazardous
environments; infinite temperature selection
• Includes : Five-foot 3-wire cord and plug
120V
Heating Surface Small
12" x 12" Large
12" x 24" Material: Cast aluminum top
Dimensions: 7"W x 7.63"D x 3.25"H
Maintains Temp.: ±5.5°C
Thermostatic safety set at 243°C
Boils 600 mL in 60 mins.; UL/cUL listed
Temperature Range, 120V
°C
°F
38 – 220 100 – 428
Cat. #
4000-92
$/Each
1,090.00
257.00
Cimarec™ Aluminum Digital Hot Plates and
Ceramic Stirring Hot Plates
by Thermo Scientific
Cimarec Digital Hot Plates and Stirring Hot Plates deliver excellent temperature
precision and uniformity. Units have a digital display and a large control knob
for easy temperature settings and adjustments. The microprocessor controls
provide repeatable temperature settings and the flat top and high-wattage
provide excellent heat transfer and fast boiling times.
View the online product page for details on Ceramic or Aluminum models.
• Stirring Hot Plates: StirTrac™ for smooth low-speed stirring, strong
magnetic coupling and braking for quick flask removal; integrated ring
stand holder Material: Cast aluminum base
• HOT TOP warning system prevents accidental burns
• Speed Range: 60 – 1200 rpm
• Includes: Detachable line cord and plug
Hot Plate
Hot Plate
Hot Plate
Hot Plate
16
Aluminum Digital Hot Plates, 120 V
7.25" x 7.25"
4100-03
Ceramic Digital Stirring Hot Plates, 120 V
Heating Surface
Cat. #
4.25" x 4.25".
4000-86
7.25" x 7.25"
4000-88
10.25" x 10.25"
4000-90
276.00
$/Each
197.00
214.00
319.00
Cat. #
4000-99
4001-02
$/Each
1,058.00
1,345.00
Stirring Hot Plates
Cimarec™ i Telesystem Multipoint Stirrers
Super-Nuova™ Digital Stirring Hot Plates
RT2 Advanced Digital Hot Plate Stirrers
Designed for integration with incubators and
controlled-climate chambers, these models come
with i 20C or i 40C Telemoduls. View online product
page to see additional models.
These user-friendly models have a HOT TOP
Warning System and StirTrac™ for slow-speed
stirring, stronger magnetic coupling and consistent
speed control. View online product page for other
Nuova products.
Designed with user-selectable control modes, these
compact models provide temperature accuracy,
overheat prevention and a HOT TOP Warning
Indicator. View online product page.
Fully submersible in water baths up to 50°C
• Material: Stainless-steel (chemical-resistant)
• Operating conditions -10° to +56°C at 100%RH
in air; 0° to 50°C in water
• Stirring Position: 60
• Capacity: 0.1 to 50 mL per point
• Includes: Cord set and controller
Telemodul I 40C Models, 120 V
Speed
Cat. #
100 – 2000 rpm
3618-39
$/Each
3,682.00
User-friendly with superior safety features
•
•
•
•
•
•
Material: Aluminum top-plate
Dimensions: 8.2"W x 13"D x 3.9"H
Capacity 4 L; Stirring Position: 1
Temperature Range: 1° to 370°C
Includes: detachable line cord and plug, 6" type
K probe, stir bar
Speed, 120 V
50 – 1200 Cat. #
$/Each
4100-07927.00
Ideal for temperature-sensitive procedures
•
•
•
•
•
•
•
Material: Ceramic-coated aluminum
Heating Surface: 5.5" diameter
Temp. Control: Optimal, Fast and Slow
Maximum Load: 55.1 lbs., Capacity: 20 L
Temp. Limit Setting: 2 user-selectable
Includes: PT100 Temperature probe
Speed, 120 V Mode
30 – 2000 rpm Digital
Cat. #
$/Each
1538-25884.00
Hot Plates, Stirring Hot Plates, and
Magnetic Stirrers
by Benchmark Scientific
These durable and compact units are a costefficient solution for crowded benchtops inside of
bio safety cabinets. All models are compatible with
a range of borosilicate glass, beakers, flasks, bottles
and other vessels.
Units have a vibrant LCD display and a safety LED
shows activation of unit and if the top plate reaches
above 50°C. The advanced microprocessor control
has an easy-to-turn knob for precise adjustment
and maintenance of temperature and speed. View
online product page for details.
• Material: Ceramic-coated stainless steel top; die
cast aluminum body
• Dimension: 8"W x 9"D x 4.5"H
• Heating Surface: 7.5" x 7.5"
• Temperature Range: 80 to 380°C
• Operating Temperature Range: +4 to +65°C
• Speed Range: 60 to 1500 rpm
115 V Models
Cat#
Hot Plate/ Magnetic Stirrer* BR05-00
Hot Plate
BR05-01
Magnetic Stirrer
BR05-02
*Model #BR05-00 includes a support rod
$/Each
291.00
182.00
196.00
Compact and reliable models for general laboratory use
17
environmental test chambers by Caron
Freeze and Thaw Environmental Chambers
Models provide accurate control of a wide range of thermal conditions. The automatic
programmable cycling between setpoints enables continuous environmental simulation
for rapid testing. The controller performs 4 programs, 40 steps, an infinite number of
loops and a ramp based on any time or rate. View online product page for dimensions
and more product details.
• Material: Cold Rolled Steel, Powder Coated (Exterior); Type 304, 2B Finish, Solid
Stainless Steel (Interior)
• Temperature Range: -25°C to 70°C
• Temperature Control/Uniformity at 20°C: ±0.1°C/±0.3°C
• Humidity Range/Control: 20 to 98%/±3% RH
• Application: Pharma drug research, concrete and asphalt testing, coating and adhesive
testing, outdoor weathering tests, stress testing
Model
Shelves Included/Max.
Capacity cu. ft.
208/230 V, 60 hz
Cat. #
$/Each
Humidified*
4/25
25
5757-32
17,497.00
Standard
4/25
25
5757-33
14,650.00
Humidified*
5/31
33
5757-34
18,953.00
Standard
5/31
33
5757-35
16,041.00
* Humidified models feature gVapor energy efficient delivery of controlled humidity vapor
(as needed)
33 cu. ft.
25 cu. ft.
Insect Growth Chambers
Designed for insect rearing in various fields and disciplines, these energy efficient units
come standard with corrosion-resistant phenolic coated coils that protect interior
components and contribute to unit longevity. View online product page for dimensions
and details.
•
•
•
•
•
•
•
•
Temperature range/control: 5°C to 70°C/ ±0.1°C
Temperature uniformity/sensor: ±0.3°C/ 3-wire RTD
Humidity range/control: 20% to 98%/ ±2% RH
gVapor™ delivers controlled humidity vapor as needed
gROD™ for energy savings; high R, CFC-free foam insulation
gLux™ Fluorescent Lighting System simulates day/night conditions
Includes adjustable, perforated stainless steel shelves
Application: Insect growth studies in various fields and disciplines
Model
5757-28
Transportable,
30% more space w/
heavy-duty casters
5757-27
Transportable w/
heavy-duty casters
5757-26
Stackable w/ leveling
feet
Benchtop*
Floor Model**
Floor Model**
*1 access port
Shelves Included/Max
3/15
4/25
5/31
**2 access ports
Capacity cu. ft.
10
25
33
115 V, 60 hz
Cat. #
5757-26
5757-27
5757-28
$/Each
12,237.00
13,879.00
15,454.00
Photostability Chambers
Specifically designed for operation near UV- and visual-light testing with fluorescent
lamps, these benchtop units provide uniform light distribution and high-intensity levels
for quick response to forced degradation and confirmatory processes. View online
product page for details.
•
•
•
•
•
•
•
Dimensions: 37.6"W x 30.2"D x 46"H, with leveling feet.
Shelf area dimensions: 19 x 23/Shelf capacity: 22 lbs. max
Capacity: 10.5 cu. ft.; Lamp type: UVA and VIS
Material: Stainless Steel/Reflective specular aluminum
Features manual and automatic mode, programmable alarms
Includes two access ports; two sliding shelves
Application: Forced degradation studies and confirmatory studies in agriculture,
pharmaceutical and biological industries
Time Req. to reach ICH 200
Rec.: W-hr/m2
Rec.:1.2 million lux-hr
10 hrs.
Standard
60 hrs.
8 hrs.
Humidified*
35 hrs.
* Isolates effects of hydration during photostability testing
115V, 60hz
Model
18
Cat. #
$/Each
5757-42
24,637.00
5757-43
26,205.00
environmental test chambers
Heated and Humidified Incubators by Caron
These energy-efficient benchtop and floor-standing models provide consistent and
precise controlled conditions in research processes. View online product page for
ordering details.
•
•
•
•
•
•
•
Material: Stainless steel
Temperature range/control: 10°C above ambient to 70°C/ ±0.1°C
Temperature uniformity: ±0.3°C/
gVapor™ delivers controlled humidity vapor as needed
gROD™ for energy savings; high R, CFC-free foam insulation
gLux™ Fluorescent Lighting System simulates day/night conditions
Application: General laboratory research, life science
Model
Shelves Included/Max
Capacity cu. ft.
115 V, 60 hz
Cat. #
$/Each
Heated
3/15
10
5757-36
7,887.00
Humidified*
3/15
10
5757-37
10,071.00
Heated
4/25
25
5757-38
8,727.00
Humidified*
4/25
25
5757-39
10,799.00
Heated
5/31
33
5757-40
10,071.00
Humidified*
5/31
33
5757-41
12,255.00
* Humidified models feature gVapor energy efficient delivery of controlled humidity vapor
(as needed)
33 cu. ft.
25 cu. ft.
10 cu. ft.
Midi™ 40 Small Capacity CO2 Incubator by Thermo Scientific
These compact and stackable units feature a comprehensive advanced microprocessor
system for safe and efficient operation. Designed for cell culture scientists, these models
deliver what bigger incubators do at a cost-effective price point and in a space-saving
footprint. View online product page for 230V models.
•
•
•
•
•
•
•
•
•
•
Exterior Dimension: 18.5"W x 23.5"D x 18"H
Interior Dimension: 122"W x 14"Dx 14"H
Material: stainless steel
Advanced IntrLogic™ II microprocessor
Factory calibration maintains accurate thermal gas performance
Comprehensive alarm system
Temperature range: 5°C above ambient to 60°C
Temperature control ±0.1°C
Includes: four stainless steel removable shelves
Application: cell culture
Capacity
1.4 cu. ft.
Temp. Range
5° to 60°C
CO2 Concentration Range Cat. #
0 to 20%
3615-78
$/Each
Stores up to 35 T75 culture flasks
4,414.00
myTemp™ Mini Digital Incubators by Benchmark Scientific
Easy to use and compact, these transportable digital incubators immediately begin to
heat once desired temperature is set. The LED display shows the chamber temperature
in real time. View online product page.
•
•
•
•
•
•
•
Exterior Dimensions: 13.2"W x 14.5"D x 18.7"H
Interior Dimensions: 10.3"W x 9.3"D x 12.8"H
Digital temperature control and large LED display
Accepts bottles and flasks up to 2 L
Transparent door
Convenient carrying handle
Includes two adjustable removable shelves
myTemp
Heat Only
Heat and Cool
Universal Voltage with US plug
Temperature
Cat. #
Ambient +1°C to 60°C
BR18-00
Ambient -15°C to 60°C
BR18-01
$/Each
390.00
548.00
19
Ovens
Heratherm™ General, Advanced Protocol and
Advanced Security Protocol Ovens
Gravity and mechanical convection modes in benchtop or floor standing
models are available in a wide range of sizes. Mechanical convection
models provide fast sample drying and heating, superior temperature
uniformity and quick temperature recovery. Gravity convection models
provide gentle drying and heating with low air turbulences.
View the online product page for complete details
•
•
•
•
•
•
B
Stackable with adjustable shelves
Rounded inside corners for easy cleaning
Microprocessor control
Automatic overtemperature alarm
Easy calibration routine
RS232 interface
A. General Protocol Ovens
Routine heating and drying up to 250°C
• Material: Stainless steel
• Manually controlled fresh air damper
• On/Off timer functions
B. Advanced Protocol Ovens
A
C
A
B
C
Type
Gravity, 120 V, 66 L
Mechanical, 120 V, 66 L
Range
Cat. #
50° to 250°C
50° to 330°C
50° to 330°C
3700-87
3700-90
3700-93
3700-96
3616-40
3696-49
Large Capacity Forced-Air MultiPurpose Ovens by Shel Lab
Ideal for glassware drying and high volume sample
and production processes, these ovens have
excellent temperature uniformity and fast recovery.
View online product page for dimensions.
•
•
•
•
Temperature Range: Ambient +15°C to 260°C
Material: Stainless steel interior
Includes stainless steel shelves
Exhaust port, digital timer, independent
overtemperature safety, wrap-around insurable,
high-temperature silicone door seal
Capacity, 240 V
14 cu ft./three shelves
28 cu ft./six shelves
20
Cat. #
3700-85
3700-86
$/Each
3,494.00
4,920.00
$/Each
1,585.00
1,849.00
2,025.00
2,467.00
2,114.00
2,658.00
Accurate and heating up to 330°C
• Adjustable fan speed: 2-5
• Electronically controlled fresh air damper
• Flexible timer functions; programmable features
• Access port for data monitoring
C. Advanced Protocol Security Ovens
Safety features protects samples
• Adjustable fan speed: 5
• Undertemperature alarm, door alarm, lockable door, connection
for optional sample temperature sensor
• Optional stainless steel exterior
Class 100 Cleanroom Ovens
Vacuum Ovens
• Repeatable temperature settings from ambient
+5° to 250°C
• Material: Stainless steel interior
• Non-filtered models meet Class 100 requirements;
HEPA-filtered models exceed Class 100 conditions
• Four program controller with 16 segments
• Temperature Range: Ambient +10° to 220°C
• Material: Stainless steel interior
• Independent vacuum and purge needle valves;
radiant warm-wall heating
Used for cleanroom, semiconductor and electronics
applications, these units provide excellent
temperature control and uniform heating. View
online product page for specs.
Capacity
240 V
Cat. #
$/Each
14 cu ft./
With HEPA Filer 3700-70 9,596.00
three shelves
28 cu ft./
w/out HEPA Filter 3700-15 7,649.00
six shelves
Designed for desiccating, vacuum embedding,
plating and electronic component processing
applications, these models are available with two
control and display options. View online product
page for specs.
Capacity
120 V
Cat. #
$/Each
14 cu ft./
Dial Thermometer 3700-35 2,803.00
three shelves
28 cu ft./
LED Readout 3700-80 2,878.00
six shelves
Furnaces by Thermo Scientific
Lindberg/Blue M™ 1700°C Box Furnaces,
Integral Control
Designed for high-temperature operation with minimal maintenance,
these energy-efficient models are available in three controller modes.
Units are ideal for composite research, precious- and exotic-metals
treatment, high-temperature ceramic research and powder metallurgy.
Features:
• Fast heat-up and increased resistance to thermal shock with
Moldatherm™ high-temperature ceramic fiber insulation
• Molybdenum disilicide elements reduce maintenance
• Side swing door for full and easy access to chamber
• Solid-state power module with ammeter, circuit breaker, transformer
and front panel indicator lights
Digital Single Setpoint models have a microprocessor-based PID
control with a single segment and setpoint and one ramp to setpoint. This
mode also features an adjustable high limit over-temperature protection
and LED display that shows actual temperature vs. setpoint.
Digital Multisegment/Multiprogram models have a microprocessor
based PID control with up to 30 programs and up to 300 segments
for ramp and dwell temperature control and up to 99 segments per
program. The digital LED display shows actual temperature vs. setpoint
in °C or °F Digital Single-Setpoint Controller
Digital Multisegment/Multiprogram/Communications models allow
connection to a remote computer via an RS-485 data port to enable
modification, interrogation and data transfer of instrument control and
configuration parameters.
Versatile models available
in three temperature
control modes
No. 1617-22
Capacity
17 L
Interior Dimensions
11"W x 10.5"D x 9"H
17 L
11"W x 10.5"D x 9"H
17 L
11"W x 10.5"D x 9"H
Optional: Over-temperature Protection (OTP) operates via signal
from an independent thermocouple. The OTP protects unit and load in
event of control circuit failure by overriding main controller and shutting
off power if high limit is reached.
25.5 L
11"W x 15.5"D x 9"H
25.5 L
11"W x 15.5"D x 9"H
View online product page for details.
25.5 L
11"W x 15.5"D x 9"H
Lindberg/Blue M Moldatherm™ Box
Furnaces—100° to 1100°C
Available in two controller modes, these doublewalled furnace models minimize exterior temperature.
View online page for additional capacities and specs.
• Self-tuning feature ideal for thermal process
• Digital OTP: single segment, single setpoint, one
ramp setpoint
120V
Digital OTP 1.99 L
Mult. Seg/1 Prog/OTP, 5.3 L
Cat. #
1722-10
1722-16
$/Each
2,196.00
2,899.00
Controller
Digital/1 setpoint
Multisegment/
multiprogram
Multisegment/
multiprogram/
communications
Digital/1 setpoint
Multisegment/
multiprogram
Multisegment/
multiprogram/
communications
Cat. #
$/Each
1617-22
20,127.00
1617-24
21,018.00
1617-26
25,175.00
1617-28
23,624.00
1617-30
28,475.00
1617-32
28,475.00
Thermolyne™ Benchtop Muffle
Furnaces—100°C to 1200°C
Thermolyne Largest Tabletop Muffle
Furnaces—100° to 1093°C
•
•
•
•
• CSA and CE approved (select models)
• Includes two refractory shelves
• 35A circuit breaker protect critical components
and heating elements
Ideal for general lab use in processes such as
gravimetric analysis, sintering, quantitative analysis
and heat treating, these energy-efficient models are
available in 2 L and 5.9 L capacities. View online
page to see additional capacities.
Open-coil heating on both sides of chamber
Door safety switch; Includes power cord
Free-floating door prevents heat loss
Thermocouple break protection
120 V, 2 L Capacity
Single Set Point Control
Prog. 4 Ramp & 4 Dwell
Cat. #
1800-52
1800-54
$/Each
2,379.00
2,993.00
Designed to maximize space, these models
are available in two temperature modes ideal
for annealing glass, determination of volatiles,
catalyst research and ashing samples. View online
product page.
240 V, 45 L Capacity Cat. #
Digital Single Setpoint 4003-01
Digital Programmable 4003-04
$/Each
6,994.00
7,846-00
21
Refrigerators and Freezers by Revco/Thermo Scientific
A
No. 1536-14
B
No. 1536-25
A. CxF Series -40°C and -86°C Chest
Freezers by Revco
The CxF Series Chest Freezers are designed to
provide versatile and reliable sample storage.
An intuitive microprocessor control panel allows
personnel to see set points, system status and alarm
messages. A variety of sizes and temperature ranges
are available to accommodate most application
requirements. View online product page.
Type
CxF Ultra Low
CxF Ultra Low
CxF Ultra Low
CxF Ultra Low
CxF Ultra Low
CxF Ultra Low
CxF Ultra Low
CxF Ultra Low
UxF Ultra Low
UxF Ultra Low
UxF Ultra Low
UxF Ultra Low
UxF Ultra Low
Cryo Box Cap.*
63
252
348
396
A
63
252
348
396
300
400
B
500
600
700
No. of Drawers
Pharmacy Refrigerator
5
6
C
6
12
* Using 2" Box Rack. ** Other voltages available.
22
A
No. 1536-13
C
No. 1620-39
B. UxF Series -86°C Upright Freezers
C. Revco Pharmacy Refrigerators
by Revco
The UxF Series freezers provide outstanding sample
protection, while maintaining the highest standards
in performance, energy efficiency and capacity per
footprint. A dual-cascade system provides faster
recovery after door openings, tighter uniformity,
and reduces energy use. A variety of sizes and
temperature ranges are available to accommodate
most application requirements. View online
product page.
These high-performance pharmacy refrigerators
provide stable temperature control over a range of
+1°C to +8°C. Easily configured for accurate storage
and retrieval of pharmacy products, these units also
have full extension stainless steel roll-out drawers,
safety glass, double-panel doors and a bright digital
temperature display that simplifies operation. View
online product page.
Exterior Dimensions H" x W" x D"
28.5 x 29.9 x 43.8
72 x 33.4 x 40.5
87.6 x 33.8 x 40.5
96 x 33.4 x 40.5
28.5 x 29.9 x 43.8
72 x 33.4 x 40.5
87.6 x 33.8 x 40.5
96 x 33.4 x 40.5
17.78 x 28.29 x 51.23
23.13 x 28.29 x 51.23
28.75 x 28.29 x 51.23
34.38 x 28.29 x 51.23
40.0 x 28.29 x 51.23
24 x 29.5 x 73.6
28 x 36.4 x 79.2
34 x 36.4 x 79.2
56.5 x 36.4 x 79.2
Temp Range (°C) Capacity (cu. ft.)
-10° to -40°
3
-10° to -40°
12.7
-10° to -40°
17
-10° to -40°
20
-50° to -86°
3
-50° to -86°
12.7
-50° to -86°
17
-50° to -86°
20
-50° to -86°
14.9
-50° to -86°
19.4
-50° to -86°
19.4
-50° to -86°
19.4
-50° to -86°
19.4
1° to 8°C
1° to 8°C
1° to 8°C
1° to 8°C
11.5
23.3
29.2
51.1
Power**
115V
115V
115V
115V
115V
115V
115V
115V
115V
115V
115V
115V
115V
1536-10
1536-11
1536-12
1536-13
1536-14
1536-15
1536-16
1536-17
1536-24
1536-25
1536-26
1536-27
1536-28
5,319.00
6,523.00
7,442.00
7,539.00
7,799.00
9,748.00
10,480.00
12,267.00
10,715.00
12,114.00
13,045.00
13,977.00
14,832.00
115V
115V
115V
115V
1620-27
1620-31
1620-35
1620-39
3,974.00
5,969.00
6,860.00
7,961.00
Cat. #
$/Each
Refrigerators and Freezers by Thermo Scientific
Jewett™ Pass-Through Refrigerators
Provides convenient multiple-point access for
cold storage of non-critical materials in life science,
clinical and industrial applications. UL and CE
listed units keep uniform temperature and rapid
recovery. Temperature range: 2° to 4°C. Models
below are 120VAC; 220VAC available. Shown:
3515-09. View online product page.
No. of No. of Capacity
Doors Shelves
Cat. #
2
5
24.8 cu. ft. 3615-09
4
10
55 cu. ft. 3615-11
$/Each
6,488.00
9,398.00
General Lab Refrigerators/Freezers
Choose among undercounter (UC on chart
below) and upright lab refrigerators, freezers,
or refrigerator/freezers. Temperature range: 1°
to 12°C (refrigerators), -12° to -20°C (freezers).
Models below are 120VAC; 220VAC available.
Shown: 1720-49B. View online product page.
Model
UC Ref.
UC Ref./Freezer
Upright Ref./Freez.
UC Freezer
Upright Freezer
Capacity
5.6 cu. ft.
5.6 cu. ft.
18.2 cu. ft.
5.6 cu. ft.
20 cu. ft.
Cat. #
1720-43
1720-47
1720-49B
1720-54
1720-60
$/Each
1,535.00
1,560.00
2,416.00
1,281.00
1,817.00
Flammable Material Refrigerators/
Freezers
Protects against explosions emanating from stored
flammable materials at below-ambient temperatures
or vapors in the surrounding area. Suitable for Class 1,
Group C and D environments. Temperature range: 1°
to 12°C (refrigerators), -12° to -20°C (freezers). Models
below are 110VAC (220V available); shown: 1720-20.
Model
Lab Ref./Freezer
Undercounter Freez.
Upright Refrigerator
Upright Freezer
Capacity
10.1 cu. ft.
5.6 cu. ft.
21 cu. ft.
20 cu. ft.
Cat. #
1720-20
1720-25
1720-41
1720-27
$/Each
3,109.00
3,097.00
6,825.00
3,497.00
Refrigerators and Freezers from Marvel Scientific
ADA-Compliant Refrigerator
Fits under 34" countertops and casework. Complies
with American with Disabilities Act (ADA) for
accessibility. UL and C-UL listed. Temperature
range: 1° to 7°C. Model below is 120VAC; 220VAC
available. Capacity: 5.4 cu. ft. Ext. dimensions:
23.875"W x 24.375"D x 31.5"H. Includes one
stationary shelf and two pull-out selves. View online
product page.
Cat. #
$/Each
2860-06A961.00
Two-Drawer Undercounter Refrigerators Hazardous Location Refrigerators
UL-listed for commercial lab use, these units feature
extra-deep pull-out drawers for easy access to full
storage area. Hidden touchpad controls include LED
digital display. Temperature range: 0° to 7°C. Capacity:
5.6 cu. ft. Ext. dim.: 23.875"W x 24.25"D x 34"H. Models
below are 120VAC. View online product page.
Drawer Finish
White powder-coat steel
Stainless steel
Cat. #
2860-07A
2860-08A
$/Each
1,539.00
1,628.00
UL-listed for Class 1, Group C and D applications;
complies with NEC code for Class 1, Division 1 and
2 hazardous locations. Features two adjustable wire
shelves and adjustable microprocessor thermostat.
Temperature range: 1° to 7°C. Model below is
110VAC. Capacity: 6.1 cu. ft. Ext. dim.: 23.875"W x
26"D x 34"H. View online product page.
Cat. #
$/Each
2860-04
1,686.00
23
Cryogenics by Thermo Scientific
Complete line at TerraUniversal.com
A. Bio-Cane™ Cane and Canister Systems
Units are a cost-effective method of storing cells, tissues and
other biological samples. Vessels hold samples up to seven
months without replenishing liquid nitrogen (LN2). Capacity
sizes: 20 L, 34 L, 47 L, and 70 L. View online product page.
Cat. #
4901-081,200.00
Bio-Cane 20
$/Each
B. – D.Locator Cryogenic Rack and Box Systems
These compact systems are designed for long-term storage
and easy retrieval of cell samples. Stores samples below -180°C
even when less than 2" (51 mm) of liquid nitrogen remains.
A
B. Locator™ Jr. – LN2 without Monitor
E
Vial Capacity
1600
Cat. #
$/Each
4901-003,071.00
C.Locator 8 – LN2 without Monitor
Image shows a Locator 8 being filled with liquid nitrogen.
Vial Capacity
1800
Cat. #
$/Each
4901-023,997.00
D.Locator 4 with Level Monitor 120V – LN2
Safeguards valuable samples with minimal liquid nitrogen
evaporation and conduction.
Vial Capacity
3600
Cat. #
$/Each
4901-044,791.00
E. Liquid Nitrogen Transfer Vessels
D
B
D
C
Level Monitor
for Locator 4
Stores and dispenses liquid nitrogen to Locator Systems,
these vessels are available in 5 L, 10 L, 20 L and 32 L
capacities. Lightweight aluminum dewars assure low-static
evaporation rates. View online product page.
Thermo 5 L Capacity
Cat. #
$/Each
4901-36879.00
Freeze Dry Systems and Vacuum Concentrators by Labconco
FreeZone® 1 Liter
Benchtop Freeze Dry Systems
Ideal for light aqueous sample loads, these units
have an upright stainless steel collector coil
(removes a max. of 1 L of water in 24 hrs.). Features:
¼-HP refrigeration system, LCD display, CFC-free
refrigeration system. View online product page.
Cat. #
115V
$/Each
6922-004,291.00
CentriVap® micro IR Vacuum
Concentrators
FreeZone Plus 2.5 Liter
Freeze Dry Systems
These units handle light sample loads and the
upright stainless steel collector coil removes 1.8 L
of water/24 hrs., and holds 2.5 L of ice before
defrosting. View online product page.
24
Cat. #
$/Each
3647-808,676.00
Compact and portable, this personal-sized
concentrator is ideal for DNA samples and small
throughput environments. The infrared (IR)
glass lid speeds evaporation and reduces cross
contamination. Included rotor holds 24 small
samples. View online product page.
Cat. #
3648-25
$/Each
5,491.00
Water Systems: DI and RO by Thermo Scientific
A. Barnstead™ MicroPure™ System
The compact units are ideal for producing ultrapure water
for molecular biology, microbiology and analytical chemistry
labs. They produce 15 liters/day of Type 1 water and are
available with mix-and-match system option for UV, UF,
UV/UF treatment. View online product page for more
configurations and specifications.
Analytical and UV System
UV-ST System
Cat. #
$/Each
3614-913,375.00
3614-963,531.00
(Includes integrated 6 L feed water tank)
B. Barnstead EASYpure™ RoDi System
The RoDi system produces 800ml/minute of Type I water
from tap feed on demand. These portable systems provide
a reservoir feed for reagent-grade water. Integrated pump
is whisper-quiet. View online product page.
Cat. #
$/Each
EASYpure RoDi 3613-303,290.00
Start-Up Kit
3613-31399.00
(Requires Start-Up Kit below)
A
A
B
C. Barnstead GenPure™ Water Purification
System
Able to mix and match UF, UV and TOC systems for userspecific water purity levels, the GenPure system produces
up to 200 L/day of GLP-compliant Type 1 ultrapure water
from a pretreated feed water supply. It is ideal for a broad
range of life sciences and analytical chemistry processes.
View online product page for more configurations and
specifications.
GenPure Water System GenPure UF Water System
Cat. #
D
$/Each
1714-325,049.00
1714-335,507.00
(Includes Ultra-Filtration; ideal for molecular biology,
microbiology, PCR, IVR and monoclonal antibody processes)
D. GenPure xCAD Water Purification System
Includes all the features of the GenPure system above, plus
remote dispensing, electronic dosing capabilities, and flexible
mounting options. View online product page.
GenPure xCAD Water System GenPure xCAD UF Water System
Cat. #
$/Each
1714-485,360.00
1714-495,818.00
C
D
(Includes Ultra-Filtration; ideal for molecular biology,
microbiology, PCR, IVR and monoclonal antibody processes)
E. LabTower™ TII Water Purification System
This system converts tap water into GLP-compliant Type 2
water; choose 20 L or 20 L/hr. models. This stand-alone unit
with casters has an integrated 100 L tank that recirculates
reservoir water to preserve purity even during periods
of stagnation. Optional UV light eliminates bacteria. More
configurations and specifications. View online product page.
LabTower TII System, 20 L/hr. LabTower TII System, 40 L/hr. Cat. #
$/Each
1108-508,327.00
1108-529,076.00
F. LabTower EDI Water Purification System
Two stand-alone systems in one. These models produce
either Type 1 (up to 200L/day) or Type 2 (up to 500L/day)
purified water. Includes high-performance RO module
with Electrodeionization (EDI) technology. Integrated
100-liter tank recirculates Type 2 water to optimize purity.
LabTower EDI System, 15 L/hr. LabTower EDI System, 30 L/hr.
Cat. #
$/Each
1714-6011,546.00
1714-6113,210.00
E
F
25
Autoclaves and Sterilizers by Benchmark Scientific
BioClave™ 16 and BioClave Mini Autoclaves
Specifically designed for use in research applications, BioClave 16 and
BioClave Mini Autoclaves are compact benchtop units that accommodate
various liquids, media, instruments, glassware, plasticware and other standard
laboratory materials. View the online product page for full details and
specifications on 120V models.
• Fully automatic operation; large digital display
• All cycle segments (fill, sterilize, exhaust and dry) begin and finish by pressing
the start button
• Mechanical and electrical safety interlock keeps door closed until pressure
reaches zero PSI
• Built-in water tank eliminates need for external water supply
• Optional: Thermal Mini Printer (BioClave 16 only)
BioClave 16 features three standard preset cycle options for use with liquids,
wrapped/unwrapped instruments and plasticware. A fourth option “Dry Only” is
also available for additional drying time after the end of a cycle. Fully adjustable
settings are ideal for applications requiring different parameter settings.
BioClave Mini has a preprogrammed sterilization time ideal for daily lab
routines. Temperature can be selected at either 121°C or 134°C. Compact 8 L
units are ideal for crowded benchtops.
BioClave 16 with three cycle options
120 V Models
BioClave 16
BioClave Mini
Thermal Mini-Printer BioClave 16 only
3 Rolls Printer Paper
BioClave Mini preprogrammed to meet
basic sterilization needs
Thermal Mini-Printer
(for BioClave 16 only)
Includes printer cable, power cord
and one roll of paper
Specifications
Chamber Dimensions:
Tray Dimension:
Exterior Dimensions:
Maximum Pressure:
Material:
Included Trays:
Operation:
Capacity
16 Liters
8 Liters
BioClave 16
9" x 13.75"
6.5" x 10.75"
22"W x 17.5"D x 15.7"H
29 PSI / 2 Bar
Stainless Steel
3 trays
Three standard preset
cycle options
Cat. #
BR12-00
BR19-07
BR19-14
BR19-16
$/Each
4,181.00
3,090.00
236.00
31.00
BioClave Mini
6.7" x 12.5"
4.75" x 9.75"
20"W x 13.5"D x 12.9"H
29 PSI / 2 Bar
Stainless Steel
2 trays
Preprogrammed
sterilization time
BactiZapper™ Infrared MicroSterilizer
Compact enough for use in anaerobic and aerobic chambers, the BactiZapper
completely sterilizes microorganisms in seconds. The design protects user by
enclosing the asbestos-free heating element within the guard chamber.
Completely sterilizes
in 5 to 7 seconds—
NO splatter
• No spatter
• Ideal for platinum loops, needles and tube mouths
• Ceramic heating element safely enclosed in perforated stainless steel
guard chamber
• Asbestos-free core element uses infrared heat of 815°C
• Instantly sterilizes inoculating loops, needles, glass tube, borosilicate glass,
pipette mouths and other instruments
• Lower temperature setting of 500°C allows unit to be used as a standby
instrument
BactiZapper, 115V
Replacement Heating Element
Specifications
Sterilization Time:
High Temperature Setting:
Low Temperature Setting:
Highest Core Temperature:
Heating Time:
Chamber Diameter/Length:
Overall Dimensions:
Temperature Range:
Material:
26
Cat. #
BR07-00
BR07-04
5 – 7 seconds
815°C
500°C
825°C ±50°C
20 minutes
0.55" diam./6.2" length
4"W x 6"D x 6.5"H
5°C to 40°C
Stainless steel and ceramic
$/Each
259.00
104.00
Cleanroom and Utility Carts
A. Polymer Utility Carts
with Adjustable Shelves
These carts by Metro will never corrode and the
ergonomic handle provides more walking space
between you and the cart during transport. The trays
offer twice the amount of space and the ship’s edge
prevents items from sliding when cart is mobile. Twotier and three-tier models are available in blue, black
and gray. Load capacity: 150-500 lbs. Color: blue.
A
Three-Shelf Cart (No. 1532-53A)
Microban® Antimicrobial
Formulation Available!
W" x L"
18 x 28
21.5 x 33.75
27 x 39.5
18 x 28
21.5 x 33.75
27 x 39.5
Three-Shelf Deep-Ledge Cart
(No. 1532-57)
Microban Antimicrobial
Formulation Available!
B
Configuration
2-shelf
2-shelf
2-shelf
3-shelf
3-shelf
3-shelf
Cat. #
1532-12A
1532-47A
1532-13A
1532-14A
1532-53A
1532-15A
$/Each
151.00
163.00
190.00
176.00
199.00
232.00
B. Polymer “Deep Ledge” Carts
with Adjustable Shelves
Similar to models above, but with 2.75" (70mm)-deep
shelf ledges for enhanced spill containment. All models
are 41"H. Color: blue.
W" x L"
21.5 x 32.75
21.5 x 32.75
27 x 38.75
27 x 38.75
Configuration
2-shelf
3-shelf
2-shelf
3-shelf
Cat. #
1532-56
1532-57
1532-58
1532-59
$/Each
170.00
209.00
199.00
244.00
Dozens more at TerraUniversal.com!
View all Cleanroom and Lab Utility Carts
C
Series 100 – Two stainless steel solid
shelves (see chart below)
D
E
Series 400 – Two chrome wire shelves
and one stainless steel solid shelf.
F
Ordering Information
Caster
Dimensions
Dia.
W" x L" x H"
18 x 24 x 38
4"
18 x 30 x 38
4"
18 x 36 x 38
4"
21 x 36 x 39
5"
24 x 36 x 39
5"
Series 200 – Three stainless steel solid
shelves (see chart below)
Series 600 – Two wire shelves,
chrome or stainless steel.
C. Series 100
Cat. #
1401-23
1401-24
1401-25
1401-26
1401-27
D. Series 200
$/Each Cat. #
440.00
498.00
498.00
539.00
567.00
1401-44
1401-45
1401-46
1401-47
1401-48
G
E Series 400
$/Each Cat. #
589.00
650.00
650.00
710.00
755.00
1401-54
1401-55
1401-56
1401-57
1401-58
$/Each
293.00
332.00
332.00
362.00
381.00
Series 700 – Shown with optional bin.
Three wire shelves, in a choice of chrome
or stainless steel.
F. Series 600
Stainless Steel
Wire Shelves
1402-39
413.00
1402-41
471.00
1402-43
471.00
1402-45
527.00
1402-47
556.00
G. Series 700
Stainless Steel
Wire Shelves
1402-56
559.00
619.00
1402-58
619.00
1402-60
696.00
1402-62
738.00
1402-64
27
ValuLine™ Desiccators by Terra Universal
ValuLine Desiccators
Five Chamber Clear Acrylic Model #3949-04
Ideal for low-frequency access to storage, the ValuLine systems provide a controlled
flow of nitrogen for moisture-sensitive samples and components. View online
product page for video and additional models
• Acrylic models provide strength and clear visibility that can be cleaned periodically
with mild cleaning agents (do not use alcohol)
• Static-Dissipative PVC models are chemical-resistant; withstand frequent cleaning
with alcohol and other cleaning agents; resist surface charges and protect against
ESD and particle attractions; grounding terminal
• Standard parts for easy upgrade and replacement
• Included Features:
• Flowmeter
• Automatic RB® (Relief/Bleed) Valve
• Chrome-plated hinges and wire racks (adjustable)
• Expansion latch (positive seal and prevents scraping)
• Reinforced doors (for long service life)
• Rear plenum chamber for uniform gas distribution
• Grounding Terminal (SD-PVC models only)
• Options: Shelves (reinforced plastic or stainless steel), powder-coated stands
ValuLine Desiccator
No. of
Inside Dims.
Chambers
W" x D"
1
9.75 x 9.25
2
14.25 x 14.5
3
14.25 x 14.5
4
14.25 x 14.5
5
14.25 x 14.5
6
14.25 x 14.5
8
14.25 x 14.5
10
14.25 x 14.5
Clear Acrylic
Cat. #
Static-Dissipative PVC
$/Each Cat. #
3949-00
3949-01
3949-02
3949-03
3949-04
3949-05
3949-06
3949-07
290.00
690.00
1,120.00
1,192.00
1,441.00
2,017.00
2,051.00
2,470.00
3949-10
3949-11
3949-12
3949-13
3949-14
3949-15
3949-16
3949-17
$/Each
401.00
1,123.00
1,587.00
2,036.00
2,500.00
2,083.00
3,776.00
6,884.00
ValuLine ES Desiccators Extended Storage Systems
These sturdy models are ideal for long-term storage of samples and applications
that do not require rapid recovery of critical low-humidity setpoints. View online
product page.
• Rounded corners are easy to clean and ideal for particle-sensitive materials
• Designed for use with nitrogen purge and/or desiccant or as a general purpose,
dust-free cabinet
• Acrylic models provide strength and clear visibility that can be cleaned
periodically with mild cleaning agents (do not use alcohol)
• Static-Dissipative PVC models are chemical-resistant; withstand frequent
cleaning with alcohol and other cleaning agents; resist surface charges and protects
against ESD and particle attractions; grounding terminal
• Included Features:
• Chrome-plated hinges and wire racks (adjustable)
• Expansion latch (positive seal and prevents scraping)
• Reinforced doors (for long service life)
• Grounding Terminal (SD-PVC models only)
• Options: Flowmeter, Shelves (reinforced plastic or stainless steel), Automatic RB
(Relief/Bleed) Valve and powder-coated stands
Acrylic (left) and Static-Dissipative PVC (right) Models
No. 3949-27
ValuLine ES Desiccator
No. of
Inside Dims.
Chambers
W" x D"
1
14.25 x 14.5
2
14.25 x 14.5
3
14.25 x 14.5
4
14.25 x 14.5
5
14.25 x 14.5
No. 3949-32
Clear Acrylic
Cat. #
3949-25
3949-26
3949-27
3949-28
3949-29
Static-Dissipative PVC
$/Each Cat. #
273.00
547.00
921.00
1,027.00
1,242.00
3949-30
3949-31
3949-32
3949-33
3949-34
$/Each
409.00
818.00
1,158.00
1,535.00
1,885.00
Accessories for ValuLine and ValuLine ES
Automatic RB (Relief/Bleed) Valve
Flowmeter (1-10 SCFH)
Reinforced Acrylic Shelf
Perforated EP 304 SS Shelf
28
Cat. #
1600-60B
1600-31
1976-01
1976-02
$/Each
99.00
118.00
44.00
133.00
Cat. #
$/Each
Solid 304 EP SS Shelf*
1976-05
133.00
Solid 304 EP SS Tray*
1976-04
133.00
Stand
1740-32
342.00
Casters (set of 4)
1700-44
246.00
* Shelves individually polybagged and sealed to prevent surface contaminants.
Desiccators by Bel-Art
Secador® 1.0 and 2.0 Desiccators
These cost-effective units have a patented seal design for excellent moisture
protection. Units are ideal for applications in pharmaceutical, R & D and life science
industries. View the online product page for Secador 1.0 and Secador 2.0 models
•
•
•
•
Low footprint models available in standard and gas-purge
Gas-purge models can be used with desiccants by closing stopcocks
Amber color models reduce visible light penetration by 50%
Portable, interchangeable and stackable up to 3 units high with interlocking ridges
and built-in carrying handles
• Durastar® copolyester material blocks 99% of UV light; resists stains, chemicals
and fine cracks
Color
Clear/Blue Caps
Amber
Clear
Amber
Type
Standard
Standard
Gas Ports
Gas Ports
Secador 1.0
Cat. #
Secador 2.0
$/Each Cat. #
1538-09
1538-11
1538-12
1538-13
143.00
161.00
186.00
215.00
3618-54
3618-56
3618-55
3618-57
$/Each
285.00
300.00
323.00
327.00
Secador 2.0—two shelves
13.4"W x 16.3"D x 12.4"H
Space-Savers Vacuum and Non-Vacuum Models
Available in polycarbonate (Clear Base) and chemical-resistant polypropylene (White
Base), these economical small-footprint models are ideal for use in classrooms and
research laboratories. Select models can be used with high-heat desiccator plates or
desiccant cartridges. View the online page to view all models and accessories.
Vacuum Models quickly dry samples, removes moist air from chamber and degasses;
stores (without grease) full vacuum 29.9" Hg; includes stopcock; accepts ¼" I.D.
vacuum tubing.
Non-Vacuum Models are ideal for thin layer chromatography (TLC) plates, dried
materials and chemical standards.
Type
Vacuum
Vacuum
Vacuum
Vacuum
Vacuum
Vacuum
Non-Vacuum
Non-Vacuum
Non-Vacuum
Capacity
140 mm
140 mm
190 mm
190 mm
230 mm
230 mm
140 mm
190 mm
230 mm
Base
White
Clear
White
Clear
White
Clear
White
White
White
Cat. #
1539-50
1539-51
1539-52
1539-53
1539-54
1539-55
1539-56
1539-57
1539-58
$/Each
50.00
50.00
61.00
63.00
83.00
85.00
30.00
45.00
63.00
140, 190 and 230 mm plate capacity (Vacuum Models Shown)
Techni-Dome® 360 Vacuum Desiccator
This lightweight and chemical-resistant unit stores precious samples under
constant vacuum. Unit is designed for easy viewing of samples and able to fit
more samples compared to standard plastic or glass vacuum desiccator units.
• Ideal for large-volume vacuum storage
• Accommodates items up to 18" in height
• Holds a full vacuum (29" Hg, 737 mm) at room temperature for 24 hours and
remain airtight even if not under vacuum
• Unit made of chemical-resistant polycarbonate
• Polypropylene stopcock accepts 6.4 mm (1/4") I.D. tubing
• Teflon® plug turns easily for slow turbulence-free air entrance
• Includes 2 round polypropylene shelves and gasket
• Interconnected side handles lock unit and prevent displacement of dome top
• Built-in safety locator pins
• Desiccant sold separately
Dimensions
22"W x 22"D x 22"H
Shelves
14.5" and 9" diameter
Cat. #
3308-11
$/Each
254.00
65 Liter Capacity—4x standard benchtop models
29
PRSRT STD
U.S. POSTAGE PAID
TERRA
UNIVERSAL
Thousands of Products in Stock
Laboratory-Equipment.com and TerraUniversal.com offer popular medical and pharmacy
equipment from trusted manufacturers such as Thermo Scientific, Labconco, Germfree, Terra
Universal, InterMetro, Rubbermaid and many more.
Prices in BLUE represent in-stock items and products available for quick shipping.
Online Selection and Configuration Tools
Product Selector makes it easy for you
find the exact product you need.
System Builder easily lets you configure your
system with options and accessories
Order Online
Easy online ordering of thousands of ready-made products and pre-configured systems.
Online quote requests for made-to-order and custom products.
Free-Shipping
On all products at Laboratory-Equipment.com shipped to the continental U.S.
Hassle-Free Pricing
Web prices honored worldwide
Diverse, Compliant and Cost-Effective
Laboratory-Equipment.com offers a wide range of laboratory products at
competitive prices. Select products meet USP-797, ISO Class 5 – 8, CE, CA/CAN, TUV
and many other compliance standards.
Visit www.Laboratory-Equipment.com to view thousands of products from trusted manufacturers.
Global Network of Sales Representatives
Complete listing at TerraUniversal.com
All prices and specifications are subject to change without notice. Crating charges apply to selected items. Call for information.
© Copyright 2014 Terra Universal, Inc.

life sciences instrumentation

Transcription

Similar documents

Com-Pac Yachts Sail Away Pricing New 2016 Models

PREPOSITIONS OF PLACE

pay a little. get a lot. cat

Cat Torque/Tech/Specs here.

Don`t Forget! - Pet Food Warehouse

Create a Warm Welcome for a New Cat or Kitten

for just $406 per month

MAXfund Invite - Cocktails For A Cause

and complete the form

Parts and functions of GM-143C(T)｜GM-143C 1 - CIE