Sludge Pro Disc Pumps

SLUDGE PRO
®
DISC PUMPS
3SDWP
™
BENEFITS
TRANSFER from
0-84 GPM
Patent Pending
MAX. HEAD to 184’
(80 PSI)
the wait is over for a more advanced
disc pump.
No regular
maintenance
required
Sludge Pro® disc pumps are designed for a wide range of slurry and sludge process applications for the municipal, industrial, chemical and food processing industries. These durable leak-free pumps are self priming and can
run dry without damage for uncompromising pumping reliability. Select from standard direct drive, belt driven, air,
hydraulic and engine driven systems.
TWO year Limited
warranty*
SLUDGE PRO® 3SDWP - DISC PUMPS
Ideal for abrasive,
viscous and shear
sensitive media
Advanced Disc Pump Technology
The days of limited choice for disc pumps are over. With a
Sludge Pro Disc Pump you get:
· Seal-less, glandless & leak free design
runs dry = no damage
· OSHA compliant Guard
· Over six models to select from
Self priming pump
higher operating
pressure
Innovative Trunnion Options
next generation disc
pump technology
· Santoprene®
· Teflon®
· Buna-N
· Nordel®
Not all pumping applications are alike, that’s why Wastecorp
offers you the right elastomer for your application including:
®
· Viton®
· Neoprene
*Contact factory for warranty details.
FR
EE
TRIA L
FR
EE
TRI
Provides safe protection against dead heading, closed valves
or other discharge blockages that can damage the pump. Also
permits direct charging of pulsation dampener and access for
cleaning.
AL
TRY
Pressure Sensor Assembly
FR
EE
BEFORE YOU BUY
FR
EE
T RIA L
WASTECORP.COM
SLUDGE PRO® DISC PUMPS
• [email protected] • 1-888-829-2783
CUT AWAY
TECHNICAL SPECIFICATIONS
Model
Sludge Pro® 3SDWP
Connection Size
3” 150# Flanged
Typical Flow Range
0-84 GPM
Sealed Bearing
Displacement
0.76 gal/rev
Eccentric Cam
Max. Suction Lift
25’
Max. Discharge Head
184’ (80 psi) (5.1 bar)
Max. Liquid Temp.
350°F (176°C)
Operating Speed
0-110 RPM
Connecting Rod
Quick Release
Clamp Yoke
Access Cover
MATERIALS OF CONSTRUCTION
Check Ball
Valve Seat
Trunnion
Disc
APPROXIMATE PUMP DIMENSIONS
Standard
Optional
Trunnion
Santoprene®
Neoprene
Gaskets
BUNA-N
Neoprene, EPDM, Hypalon,
HNBR, Viton, Others
Ball Valve
Urethane
Teflon®
Pedestal
Ductile iron ASTM A 536, Grade
65-45-12
Eccentric Cam
Ductile iron ASTM A 536, Grade
65-45-12
Connecting Rod
Ductile iron ASTM A 536, Grade
65-45-12
Stanchion Base Frame
Fabricated Steel
Footing Frame
Fabricated Steel
Galvanized Steel 304 SS,
316SS
Drive Cover Guard
Fabricated Steel
Galvanized Steel 304 SS,
316SS
Wetted Castings
Cast Iron ASTM A48 Class 35-40
Xylan Protective Coatings
Drive Shaft
2” - A4140/4142 Alloy high-tensile
400 Series SS
(TPE) -40.0°F to +225°F
DRIVE SYSTEM OPTIONS
PUMP SHAFT
CL
57 3/4"
28"
Direct Dive
Standard/Electric Motor
Optional
Air, hydraulic, belt driven
Engine Driven
10 5/8"
WETTED CASTING COATING OPTIONS
Y
SIDE ELEVATION VIEW
SUCTION
DISCHARGE
SUCTION
49 1/2"
51 1/8"
CL
CL
9 3/8"
CL
8 1/4"
2" BALL VALVE
24 7/8"
49 3/4"
Gas or diesel
Note: Consult factory for applications exceeding maximum pressure and/or temperature indicated.
9 3/4"
DISCHARGE
0°F to 200°F
Buna-N® +10°F to +180°F
Viton® -40°F to +350°F
Teflon® (PTFE) +40°F to
+220°F
Nordel® -60°F to +280°F
CL
12"
16 1/4"
RIGHT HAND ASSEMBLY
LEFT HAND ASSEMBLY
Material
Temperature Range
Application(s)
Xylan
-195°F to +260°F
Excellent chemical and abrasion resistance
ETFE / PTFE
-40°F to +300°F
Outstanding chemical resistance. best for
corrosive slurries
Dura-S
-10°F to +200°F
Excellent abrasion resistance, FDA material
and general purpose
Dura-XL
-10°F to +200°F
Excellent chemical and abrasion resistance
Nitrile
+10°F to +180°F
General purpose for oils, water and hydraulic
fluids
Neoprene
-10°F to +200°F
Moderate chemical resistance. Good for fats,
grease and solvents
Nordel
-60°F to +280°F
Excellent low temperature material for dilute
acids
Viton
-40°F to +350°F
Excellent chemical resistance. May cause poor
flex life for diaphragms
Hypalon
-10°F to +200°F
Moderate chemical resistance. Good for acids
and alkalies
Sludge Pro Pumps are designed, engineered and manufactured in by Wastecorp Pumps in North America. Country/region specific models are available worldwide.
Dimensions and weight are approximate. Wastecorp Pumps reserves the right to make changes in design, materials and operating ranges without notice.
PUMP CURVE
REV. DS 4/2015
FR
TRIA L
EE
TRI
AL
TRY
FR
BEFORE YOU BUY
FR
EE
Wastecorp is a manufacturer of disc pumps and double disc pumps for wastewater sewage treatment and food procesing waste. We compete with (Penn Valley Pump Company), Alfa Laval and Disc Flow. Wastecorp
est un fabricant de pompes à disques et les pompes à double disque pour le traitement des eaux usées des eaux usées et de la nourriture procesing déchets. Wastecorp является производителем дисковых насосов и
двойной диск насосов для очистки сточных вод сточных вод и обработки отходов пищи. Wastecorp jest producentem pomp i pomp dysków Double Disc dla oczyszczania ścieków ścieków i odpadów przetwórstwa spożywczego. Wastecorp ist ein Hersteller von Scheibenpumpen und Doppelscheibenpumpen für Abwasser Abwasserbehandlung und der Lebensmittelverarbeitung Abfall. Wastecorp se yon manifakti a ponp disk
ak ponp doub disk pou tretman dlo egou dlo ize ak dechè pwosesis manje. Is Wastecorp monaróir caidéal agus caidéil diosca diosca dúbailte le haghaidh cóireála séarachais fuíolluisce agus dramhaíola a phróiseáil bia.
EE
EE
T RIA L
Wastecorp Pumps Canada Inc.
55 Six Point Road
Toronto, Ontario M8Z-2X3 | Canada
Tel: 416.233.3000 | Fax: 416.233.2300
[email protected]
FR
WASTECORP.COM
Wastecorp Pumps USA
P.O. Box 70
Grand Island, New York 14072 | USA
Tel: 888.829.2783 | Fax: 888.883.3320
[email protected]
Wastecorp Pumps International
P.O. Box 70
Grand Island, New York 14072 | USA
Tel: 201.445.2882 | Fax: 201.445.3252
[email protected]
* Try Before You Buy promotion is subject to program terms. Contact a Wastecorp representative for program details.
Sludge Pro, Wastecorp and logo are trademarks of WPCI and protected by international and domestic copyrights. © Wastecorp 2015. All Rights Reserved.