safety - Workforce Safety Products

Transcription

SAFETY
CATALOGUE
CONTENTS
SAFETY GLOVES
Glove Standards
2
Size Guide
3
Glove Application Matrix
4
Design Features
6
Disposable Overalls
26
Material & Properties
6
Rainwear
27
Riggers Gloves
7
Safety Vest
28
Cotton Gloves
8
General Purpose Gloves
9
Mechanics Gloves
10
Cut Resistant Gloves & Sleeves
12
Latex Gloves
14
Nitrile Gloves
15
Polyurethane (PU) Gloves
16
Disposable Gloves
17
PVC Chemical Gloves
18
Welding Gloves
20
Specialty Gloves
21
Accessories - Glove Clips
21
PROTECTIVE HEADGEAR
Disposable Respirators
22
Safety Glasses
24
PROTECTIVE CLOTHING
TRAFFIC & SAFETYGEAR
Wheel Chocks
29
Safety Tape & Barrier Mesh
29
Traffic Cones
30
Traffic Bollards
31
ABOUT US
Our Company
32
Product Research & Development
33
1
2
GLOVE STANDARDS
European and AS/NZS 2161 Glove Standards Requirements Overview
The Australian/ New Zealand Glove standards have
been based on the European standards to ensure
safety in the workplace.
The following sections of the EN standards and AS/
NZS 2161 Occupational Protective Gloves, relate to
WSP products:
t EN 420: 2003 (AS/NZS 2161.2:2005)
General requirements
t EN 388: 2003 (AS/NZS 2161.3:2005)
Protection against mechanical risks
t EN 407:1994 (AS/NZS 2161,4:1999)
Protection against Thermal risks (heat and fire)
EN 388: 2003 (AS/NZS 2161.3:2005)
Protection Against Mechanical Risks
The AS/NZS 2161.3 Occupational
Protective Glove Standards (EN 388)
applies to all protective gloves used in
conditions of physical and mechanical
hazards.
All gloves bearing the EN388
pictogram are tested and rated for
its ability to protect against four
categories. Higher ratings indicating
better performance
t EN 374-2:2003 (AS/NZS 2161.10.2:2005)
Protective gloves against chemicals and
microorganisms – Determination of resistance to
penetration
t ABRASION (Max 4)
t EN 374-3:2003 (AS/NZS 2161.10.3:2005)
Determination of resistance to permeation by
chemicals
t PUNCTURE (Max 4)
General requirements include:
t Design and construction is suited to intended use
t Any seams present, do not significantly decrease
product performance
t Does not harm the health or hygiene of the user
Dexterity:
t 5 performance levels, determined by tests in which
metal bars of various diameters are picked up
PH value:
t All gloves are checked for compliance in terms of
the pH value greater than 3.5 and less than 9.5
Sizing
t Glove sizing conforms to set specifications with
respect to hand circumference
t Minimum glove lengths are specified for each size
WORKFORCE SAFETY PRODUCTS
XXX X
t BLADE CUT (Max 5)
t TEAR (Max 4)
Performance Rating
EN 420: General Requirements
All WSP gloves are compliant to EN 420:2003
which specifies the general requirements for glove
construction, high visibility, innocuousness, cleaning,
comfort and efficiency, marking and information
applicable to occupational protective gloves.
EN 388
1
2
3
4
5
Abrasion
(cycles to
failure)
100
500
2000
8000
N/A
Blade Cut
(min. cut
resistance
index)
1.1
2.5
5.0
10
20
Tear
(lowest peak
force)
10N
25N
50N
75N
N/A
Puncture
(lowest peak
force)
20N
60N
100
150N
N/A
EN 374-2:2003 (AS/NZS 2161.10.2:2005)
Protective gloves against chemicals and
micro-organisms - Determination of
resistance to penetration
EN 374
AS/NSZ 2161.10.2:2005 is based
on EN 374-2:2003 to specify the
method for the determination of
the resistance of protective gloves to
penetration. The primary test is an
air leak test, and gloves meeting this
Standard are considered to be suitable
for use against biologically hazardous
material.
GLOVE STANDARDS
EN 407:1994 (AS/NZS 2161,4:1999) Protection
against Thermal risks (heat and fire)
EN 407
This standard applies to protective
gloves which protect the hands
against heat and/or flames in one
or more of the following forms:
fire, contact heat, convective heat,
radiant heat, small splashes or large
quantities of molten metal. The
table below defines the criteria with
a higher rating showing a better
resistance in respect to the specific
property.
Performance Level
1
2
3
4
Burning behaviour
< 20
(After flame time, secs)
< 10
<3
<2
Burning behaviour
N/A
(After Glow time, secs)
< 120 < 25
3
Choosing your size
Sizing Guide & Measurements
The table below can be used as a guide for choosing
your glove size.
Palm
Size
(mm)
Hand
length
(mm)
Glove
length
(mm)
circumference
6
XS
152
160
220
7
S
178
171
230
8
M
203
182
240
9
L
229
192
250
10
XL
254
204
260
11
2XL
279
215
270
12
3XL
304
226
280
<5
Contact heat
(Contact temp, ºC)
100
250
350
500
Contact Heat
(Threshold time, secs)
> 15
> 15
> 15
> 15
Convective heat
(Heat transfer index)
>4
>7
> 10
> 18
Radiant Heat
(Heat transfer, secs)
>7
> 20
> 50
> 95
Small splashes of
molten metal
(Number of droplets)
> 10
> 15
> 25
> 35
Large quantities of
molten metal
(Molten Iron, gram)
30
60
120
200
Hand
Length
Standard
Glove
Length
Hand
circumference
www.wsp-ie.com.au
4
GLOVE APPLICATION MATRIX
pg 7
pg 8
pg 9
pg 10
pg 12
pg 14
Riggers
Cotton
General
Purpose
Mechanics
Cut
Resistant
Latex
RESISTANCES
ABRASION RESISTANT
CHEMICAL RESISTANT
HEAT RESISTANT
OIL RESISTANT
WATER RESISTANT
INDUSTRY APPLICATIONS
AGRICULTURE
ASSEMBLY
AUTOMOTIVE
CONSTRUCTION
COSMETICS
FISHERIES
FOOD/CATERING
GENERAL MAINTENANCE
GLASS HANDLING
INSPECTION
JANITORIAL
MANUFACTURING
MASONRY
MATERIAL HANDLING
MINING
PAINTING/PRINTING
PHARMACEUTICAL
SHEET METAL
SMALL PARTS HANDLING
TILE/CERAMICS
WAREHOUSING
WELDING/FOUNDRY
* The above application matrix is intended as a guide only. Please consult with your OH&S officer when selecting the
correct glove for your specific task.
GLOVE APPLICATION MATRIX
pg 15
pg 16
pg 17
pg 18
pg 20
pg 21
pg 21
pg 21
Nitrile
PU
Disposable
PVC
Chemical
Welding
Household
Nitrile
Chemical
Debudding
5
www.wsp-ie.com.au
6
DESIGN FEATURES
Synthetic Coatings
Lining
Coated fabric gloves can be used for a multitude of
tasks ranging from handling bricks, glass and wire to
chemical laboratory applications.
Gloves are cotton lined for wearing comfort and aid in
sweat absorption. The double lining in WSP’s Premium
Red Welders (see pg 20) also provides additional
insulation against heat.
They are made by dipping fabric liners in a synthetic
material, such as latex, nitrile, PVC (poly-vinyl chloride)
and PU (polyurethane). This process transforms it
into multi-purpose hand protection glove with slipresistant, abrasion-resistant and/or chemical-resistant
qualities.
As a general rule, the thicker the coating, the greater
the chemical and abrasion resistance. However thicker
gloves may impair grip and dexterity which impacts on
safety.
Cuff Designs
KNITTED WRISTBAND: fitted at wrist to prevent
debris or dirt from entering the glove.
SAFETY CUFF: Provides additional wrist protection
and allows hands to be easily released from the glove.
GAUNTLET: Longer cuff for extended arm protection.
Coating Finishes
BEADED CUFF: Reinforces the cuff to reduce
likelihood of tearing especially when wearing or
removing the glove.
SMOOTH: Most economical, but has no additional
gripping capability.
VELCRO FASTENING: For excellent fit and secure
wrist closure for WSP’s mechanics glove (pg 8-9).
ROUGH: Economical, improved gripping capability
SANDY: Excellent gripping capability (see doubledipped green PVC gloves - pg 19)
ETCHED: Channels away oil and liquids for maximum
gripping capabilities.
ROUGH-CHIP: Unique pebbled textured glove
specifically designed for horticultural (see Grissly
PCB L26 - pg 21)
6
KNITTED
SAFETY
BEADED
VELCRO
MATERIALS & PROPERTIES
Synthetic Leather
PU (Polyurethane)
The synthetic leather used in WSP’s Mechanics range
(pg 10-11) is a versatile alternative to traditional
cow/pig grain leathers. The material is durable and
machine washable which significantly reduces the
cost-per-wear the glove.
PU is a versatile polymer with great stretch, strength
and softness. It possess excellent flexibility and
gripping properties without being sticky making it an
ideal glove coating material for precision work and
handling of small parts.
PVC (Poly-Vinyl Chloride)
Nitrile
PVC are suitable for use with many water-soluble
chemicals including cleaning products with acidic
and alkaline properties. However protection against
organic solvents are limited.
Nitrile gloves are ideal for jobs requiring dexterity and
sensitivity. In addition, these gloves stand up to heavy
use even after prolonged exposure to substances that
cause other gloves to deteriorate.
Latex (Rubber)
They offer protection when working with oils, greases,
acids, caustics and alcohols but are generally not
suitable for use with strong oxidizing agents, aromatic
solvents, ketones and acetates.
Latex has outstanding tensile strength, elasticity and
temperature resistance properties. It is also about to
resist abrasions caused by grinding and polishing,
and most water solutions of acids, alkalis, salts and
ketones. This makes them a popular general-purpose
glove material.
Latex gloves may not be appropriate for all employees
due to latex allergies. In this case, some alternatives
to consider include hypoallergenic gloves, glove liners
and powder-free gloves.
Cut Resistant TAEKI 5 Yarn
This composite material achieves the highest level in
cut resistance and versatility. It remains comfortable
during extended periods of wear in wet, dusty or oily
conditions. Being machine-washable and lint free,
it is also economical and suitable for ‘clean room’
applications (see the full TAEKI 5 range on pg 12-13).
LEATHER RIGGERS
Leather
Leather is among the most popular
glove material. Along with great
fit and dexterity, leather gloves
can protect against rough objects,
sustained heat, sparks and abrasion.
Types of Leather
PREMIUM GRAIN COWHIDE: Strong
and supple leather. It has the best
abrasion resistance and puncture
resistance. Oil and water repellant.
SPLIT COWHIDE: Good abrasion
resistance and more economical than
premium grain. Rough texture of leather
offers better grip.
PREMIUM GRAIN PIGSKIN: Soft, supple
leather. Performs well in wet applications
as it remains pliable after being soaked in
water and dried out
Hide Cuts
SIDE CUT LEATHER: Most durable cut
and provides the most protection and
durability due to it’s dense fibre density.
SHOULDER CUT LEATHER: More
economical and less durable compared to
side cut leather.
BELLY CUT LEATHER: The most
economical cut with the least consistent
texture and appearance.
Shoulder
7
Bronco Riggers
RCB
Premium Cow Grain
Leather Glove
tFull premium grade cow grain leather
tExcellent abrasion resistance
tCow grain leather repels oil and water
tElastic wrist
EN 388
tSizes : 7, 8, 9, 10, 11
tPack qty: 12 pairs
tCarton qty: 120 pairs
Rogue Riggers
RPB
Premium Pig Grain
Leather Glove
tFull premium grade pig grain leather
tPigskin leather provides additional
breathability and comfort
EN 388
tElastic wrist
tSizes : 8, 9, 10
tPack qty: 12 pairs
Shoulder
Split-Back Riggers
Belly
Side
Side
Belly
RSB
Pig Grain Palm with
Split Back Leather Glove
Cotton
Cotton knitted gloves are economic, and
comfortable. They protect against dirt,
slivers and chafing and offer some degree
of heat and abrasion resistance. However
they are insufficient for rough, sharp or
heavy material handling
tPremium grade pig grain leather palm
tBreathable pig split back
tElastic wrist
EN 388
tSizes : 7, 8, 9, 10
tPack qty: 12 pairs
APPLICATIONS
t Rigging
t Warehousing
t Gardening
t Mining
t Shipping and packing
t Building and construction
www.wsp-ie.com.au
8
12
COTTON GLOVES
Dexterous, fine
knit and breathable
Multi-purpose glove for
light assembly and general
handling.
CIL
CKW
Cotton Interlock Glove
Poly/Cotton Glove
t Lightweight cotton interlock glove
t Suitable for glove liner
t Knitted wristband keeps out debris
t Bleached white
t Sizes: 7 (S), 9 (L)
t Pack qty: 12 pairs
t Carton qty: 480 pairs
t Cotton/Polyester blend knitted glove
t Ambidextrous design can be reversed
and used on both sides
t Bleached white
APPLICATIONS
APPLICATIONS
t Operating machinery
t General parts handling
t Assembly lines
t Automotive
t Warehousing
t Cold storage
t Assembly lines
t Automotive
t Warehousing
t Cold storage
CDB L25
CKB
CVG
Drill Cotton Dotted Glove
Knitted Cotton Dotted Glove
Drill Cotton/Vinyl Glove
t Black PVC dotted grip on palm
t Drill cotton liner
t 8 oz knit for strength and durability
t PVC dotted grip on palm
t Cotton/Polyester blend liner
t Bleached white
t Vinyl impregnated palm increases
resistance to wear and abrasion
t Drill cotton liner
APPLICATIONS
APPLICATIONS
APPLICATIONS
t Assembly lines
t Automotive
t Warehousing
t Cold storage
t Assembly lines
t Automotive
t Warehousing
t Cold storage
t Assembly lines
t Automotive
t Warehousing
t Cold storage
GENERAL PURPOSE LEATHER/COTTON GLOVES
GCX
GJY
GBY
Candy Stripe Glove
Jackaroo Leather Glove
Brumby Leather Glove
t Cow split leather patched palm
t Reinforcing leather knuckle bar for
extra protection
t Economical drill cotton back in gunn
cut pattern
t Safety cuff
t Quality chrome tanned cow split
leather
t One-piece leather palm
extra protection
t Economical drill cotton back
t Safety cuff
EN 388
t Sizes: 9, 10
t Heavy duty cow split leather
t One-piece leather palm
extra protection
t Economical drill cotton back
t Safety cuff
t Sizes: 9,10
EN 388
APPLICATIONS
APPLICATIONS
APPLICATIONS
t General maintenance
t Gardening
t General purpose handling t Construction
t Warehousing
t Farming
t Gardening
t Warehousing
t Farming
t Gardening
t Warehousing
t Farming
9
12
The economical and comfortable solution to
general packing and handling needs.
WSP’s general purpose gloves combines a durable, hardwearing leather palm with a breathable drill cotton back.
GCB
General Purpose Drill Cotton
Glove
t Drill cotton glove
t 8 oz knit for strength and durability
APPLICATIONS
t Automotive
t Packaging and handling t Warehousing
t Assembly lines
t Cold storage
www.wsp-ie.com.au
10
MECHANICS GLOVES
The Synthetic
Leather Alternative
WSP’s mechanics gloves are
comfortable, hard-wearing
and washable.
Design features include:
t Anti-vibration gel pads
t Form fitting design with
Velcro fasteners
t Finger-less gloves for
precision and small parts
handling
t Anti-slip palm
t Tough nitrile panels for
knuckle protection
ASB
AVG
Carpenters 3-Fingered
Mechanics Glove
Anti-Vibration Mechanics
Glove
t Durable synthetic leather palm
t Anti-slip palm for safe power tool
use in dry, wet or oily conditions
t 3-half finger design for precision and
handling of small parts
t Terry cord sweat band across
the thumb
t Breathable spandex back
t Elasticised cuff with Velcro
closure and name tag
EN 388
t Sizes: 8, 9, 10, 11
t Durable synthetic leather, double
layered palm
t Padded palm minimises vibration
induced stress to wrists and arms
t Anti-slip palm for safe power tool
use in dry, wet or oily conditions
t Breathable spandex back
t Sizes: 7, 8, 9, 10, 11
EN 388
APPLICATIONS
APPLICATIONS
t Power and hand tool use t Automotive
t General handling
t Carpentry
t Construction
t Shipping
t Power and hand tool use t Automotive
t General handling
t Carpentry
t Construction
t Shipping
2221
2221
AVLh
Hi-Vis Anti-Vibration Mechanics Glove
tPadded palm minimises
vibration induced stress to
wrist and arms
tAnti-slip palm for safe
power tool use in dry, wet or
oily conditions
tBreathable spandex back
tHi-vis lime colour
tElasticised cuff with
Velcro closure and
name tag
EN 388
tSizes: 7, 8, 9, 10, 11
tPack qty: 12 pairs
2221
APPLICATIONS
t Power and hand tool use
t General assembly
t Carpentry
t Shipping and handling
t Construction
t Automotive
MECHANICS GLOVES
11
HEAVY-DUTY High-Impact Mechanics Glove
AVY
tSure-grip, anti-slip fingertips and palm
excellently handle power and hand tools wet
and oily conditions
tSynthetic leather knuckles with EVA design
for back-of-hand protection
tAnti-vibration gel pads minimise vibration
induced stress to wrist and arms
tSpandex darts and darts extends
finger and wrist dexterity
tVelcro closure and name tag on cuff
tSizes: 7, 8, 9, 10, 11, 12
tPack qty: 12 pairs
EN 388
2221
APPLICATIONS
t Impact drilling
t Jackhammer t Construction
t Underground Mining t Drill & blast t Oil rigs
AFB
AFBl
Medium Duty Full-Finger
Mechanics Glove
Medium Duty Fingerless
Mechanics Glove
Hi-Vis Medium Duty
Mechanics Glove
t Breathable stretch spandex back
t Terry cord sweat band on
thumb
t Sizes: 8, 9, 10, 11
EN 388
t Fingerless design for precision and
handling of small parts
t Breathable stretch spandex back
t Terry cord sweat band on
thumb
t Elasticised cuff and Velcro
EN 388
t Sizes: 8, 9, 10, 11
2221
t High visibility lime colour
t Breathable stretch spandex back for
comfort and dexterity
t Terry cord sweat band across
thumb
EN 388
t Sizes: 7, 8, 9, 10, 11
2221
APPLICATIONS
APPLICATIONS
APPLICATIONS
t Power and hand tool use t Construction
t General assembly
t Automotive
t Carpentry
t General assembly
t Automotive
t Carpentry
t General assembly
t Automotive
t Carpentry
2221
AFLh
www.wsp-ie.com.au
12
CUT RESISTANT GLOVES
REVOLUTIONARY
CUT RESISTANT
DESIGN
TAEKI 5 gloves are engineered
with the highest standard of
EN Cut Level 5.
Combined with a lightweight
construction, the design
provides incredible comfort
with superior dexterity and
tactile sensitivity.
Each model is specialised to
offer the right protection
under the most demanding
conditions. This makes
TAEKI 5 the optimal choice
for the precision handling of
sharp materials required in
automotive industries, metal
production, white goods
manufacturing and glass
industries.
TK5#55W
TK5#55c
Taeki 5 - Uncoated Liner
White
Taeki 5 - Leather Palm
t Light weight construction and
stretchable for great fit,
dexterity and comfort
t Top rated Cut 5 gloves with
composite yarn
EN 388
t Extended cuff
t Sizes: 7, 8, 9, 10, 11, 12
t Pack qty: 10 individual gloves
t Carton qty: 120 gloves
354X
t Cow split leather palm
t High contact heat protection
- up to 250°C
composite yarn
t Excellent durability and grip
in wet and dry conditions
t Sizes: 9, 10, 11, 12
EN 388
4542
EN 407
X2XXX
APPLICATIONS
APPLICATIONS
t De-boning and carving
t Catering
t Cleaning slicing machines t Glass
t Food distribution
handling
t Welding/heat applications t Metal
t Glass handling
fabrication
t Sheet metal handling
t Automotive
TK5#55M
TK5#55y
Taeki 5 - Heat Resistant
Uncoated Gray
Taeki 5 - Heat Resistant
Uncoated Yellow
t Top rated cut resistant gloves EN 388
- up to 250°C
t Seamless knitted liner for
4544
great fit and dexterity
EN 407
t Excellent durability
t Sizes: 8, 9, 10
X2XXX
t Top rated cut resistant gloves EN 388
- up to 250°C
t Seamless knitted liner for
454X
great fit and dexterity
EN 407
t Excellent durability
t Sizes: 8, 9, 10
X2XXX
APPLICATIONS
APPLICATIONS
t Glass handling
fabrication
t Automotive
t Glass handling
fabrication
t Automotive
CUT RESISTANT GLOVES
TK5#52
TK5#57
TK5#59
Taeki 5 PU Palm
Taeki 5 - Nitrile Palm
Taeki 5 - Latex Palm
t PU coating provides excellent
dexterity and comfort during
extended wear
composite yarn
t Outstanding durability
EN 388
t Lint free and washable
t Sizes: 7, 8, 9, 10, 11, 12
t Nitrile coating withstands
prolonged exposure to oil
and greases
t Top rated Cut 5 gloves
t Contact heat protection - up
to 100°C
t Sizes: 8, 9, 10
APPLICATIONS
APPLICATIONS
APPLICATIONS
t Glass handling
t Automotive
t Recycling
t Precision work/small parts t Food
t Glass handling
t Automotive
t Recycling
t Glass handling
t Automotive
t Recycling
4542
EN 388
4542
EN 407
X1XXX
13
t Latex coating provides excellent grip
for slippery work
composite yarn
t Outstanding durability,
comfort and flexibility
EN 388
t Sizes: 7, 8, 9, 10, 11, 12
3543
Team up Taeki 5 gloves with
Taeki 5 sleeves for the ultimate
EN 388
EN 388
454X
454X
EN 407
EN 407
X1XXX
X1XXX
TK5#50-35SL
TK5#50-40SL
Taeki 5 Sleeve - Thumb Slot
Taeki 5 Sleeve - Extra Long
t Outstanding abrasion, cut and tear
protection for wrist and forearms
t Contact heat protection - up to
100°C
t Stretchable and breathable material
for great fit, dexterity and comfort
t Lint free and machine washable
t Pack qty: sold individually
t Outstanding arm protection against
abrasion, cut and tear
t Contact heat protection - up to
100°C
t Stretchable and breathable material
for great fit, dexterity and comfort
t Lint free and machine washable
t Pack qty: sold individually
APPLICATIONS
APPLICATIONS
t Glass handling
fabrication
t Automotive
t Glass handling
fabrication
t Automotive
PROTECTION
COMBO
www.wsp-ie.com.au
14
LATEX GLOVES
VADER RED Latex Gloves
LNRv
tSuperior durability and tear
resistance
tAnti-slip latex palm for the
handling of glass, bricks,
sheet metal, tiles and
ceramics
tStronger, thicker 15 gauge
seamless liner
tOutstanding flexibility
and comfort
EN 388
tSizes: 7, 8, 9, 10, 11
tPack qty: 12 pairs
LNR
Red and Grey Latex Glove
t Anti-slip latex palm coating
t Outstanding flexibility and comfort
t 13 gauge seamless liner
t Outstanding flexibility and
comfort
t Lightweight design
EN 388
t Sizes: 7, 8, 9, 10, 11
3121
3131
APPLICATIONS
APPLICATIONS
t Automotive industries
t Glass and metal handling
t Tiles and ceramics
t Fisheries
t Brickwork
t Construction
t Waste management
t General purpose handling
t
t
t
t
Glass and metal
Tiles and ceramics
Waste management
General purpose
t
t
t
t
Fisheries
Construction
Brickwork
Gardening
LGG
LGY L26
LKR L26
Tuff-E-Nuff Glass Gripper
Yellow Glass Gripper
Orange Glass Gripper
t Heavy duty palm coated rubber latex
t Ripple textured palm for
superior grip in wet and dry
t Tough 10 gauge knitted
cotton/polyester liner
t Knitted wristband
EN 388
t Sizes: 7, 8, 9, 10
t Yellow rubber latex half dipped glove
t Ripple textured palm for superior grip
in wet and dry conditions
t Knitted wristband keeps out
debris
t Jersey liner
EN 388
t One size fits all
t Heavy duty palm coated rubber latex
t Ripple textured palm for superior grip
in wet and dry
t Tough 10 gauge knitted
cotton/polyester liner
t Knitted wristband keeps out EN 388
debris
t One size fits all
3143
APPLICATIONS
APPLICATIONS
APPLICATIONS
t
t
t
t
t
t
t
t
t
t
t
t
2243
Glass and metal handling t Fisheries
Tiles and ceramics
t Construction
Waste management
t Brickwork
General purpose handling
2121
Glass handling
t Fisheries
Tiles and ceramics
t Construction
Waste management
t Brickwork
Glass and metal handling t Fisheries
Tiles and ceramics
t Construction
Waste management
t Brickwork
NITRILE GLOVES
15
VADER BLACK Nitrile Gloves
NFBv
tSuperior durability
tSuperior tear and abrasion
resistance
tNitrile foam coating for
outstanding flexibility
and tactile sensitivity
tMaximum grip when
handling oily/wet items
tStronger, thicker 15
gauge seamless liner
EN 388
tSizes: 7, 8, 9, 10, 11
tPack qty: 12 pairs
NFB
Black Foam Nitrile Glove
t Soft nitrile foam coating
t Coating channels away oil and liquids
for maximum grip
comfort
t 13 gauge seamless liner
EN 388
t Lightweight design
t Sizes: 7, 8, 9, 10, 11
4121
4131
APPLICATIONS
APPLICATIONS
t Automotive
t Small parts handling
t Warehousing
t Gardening
t General purpose
handling
t Automotive
t Small parts assembly
t General assembly
t Construction
t Mining
t Warehousing
t QC inspection
t Gardening
NKY
NKYhe
NNGf
Top-Gard II
Top-Gard 3/4 Dipped Glove
Top-Fitt
t Full dip nitrile glove with a
textured palm provides
excellent grip
t Interlock liner and knitted
wrist to keep out debris
t Outstanding abrasion
resistance
t Sizes: 9, 10
t Nitrile palm with textured
surface for excellent grip
t Interlock liner and knitted
wrist keeps out debris
t Outstanding abrasion
resistance
t Sizes: 8, 9, 10
t Nitrile foam palm coating
t 13 Gauge nylon liner
comfort
t Allows strong grip in oily or
wet conditions
t Sizes: 8, 9, 10, 11
EN 388
4111
APPLICATIONS
t
t
t
t
General handling
General maintenance
Light fabrication
QC inspection
EN 388
3111
APPLICATIONS
t Warehousing
t Gardening
t Shipping and
packaging
t
t
t
t
General handling
General maintenance
Light fabrication
QC inspection
EN 388
4121
APPLICATIONS
t Warehousing
t Gardening
t Shipping and
packaging
t
t
t
t
Automotive
General maintenance
General assembly
Small parts handling
t Shipping and
packaging
t QC inspection
t Gardening
www.wsp-ie.com.au
16
NITRILE GLOVES
ExtraFlex
Hybrid Coating Technology
HCT’s compounding process
creates deep pockets within
a durable nitrile coating. The
pockets are then injected
with a soft nitrile compound.
This combination gives HCT
remarkable softness and
flexibility while remaining
durable, abrasion resistant
and oil resistant
Flexible, soft nitrile surface coating
Q#603
Q#605
HCT 603 ExtraFlex Coated
Glove
HCT ExtraFlex
Dotted Palm Glove
t Nitrile HCT coating withstands oily
and wet conditions
t 3/4 HCT dip to back of hand for
added knuckle protection
comfort
EN 388
t Sizes: 9, 10
t Nitrile HCT coating withstands oily
and wet conditions
t Embossed dotted HCT palm provides
excellent grip
comfort
EN 388
t Sizes: 7, 8, 9, 10, 11
APPLICATIONS
APPLICATIONS
3141
t General handling and
maintenance
Durable Nitrile
Glove liner cross section
16
POLYURETHANE
(PU) GLOVES
QPU2002
PU Coated General Purpose Work Glove
t Grey PU palm coated glove
t Close fitting design ideal for precision
work and handling of small parts
t Outstanding dexterity
t Seamless knitted 13 gauge nylon liner
t Breathable back
t Sizes: 7, 8, 9, 10, 11, 12
EN 388
APPLICATIONS
t Automotive industries t Manufacturing
t Electronics assembly t Painting
t Computer assembly t General handling
4131
t Warehousing
t Recycling
t Light
assembly
4121
t General handling and
maintenance
t Warehousing
t Recycling
t Light
assembly
DISPOSABLE GLOVES
DLNm
DNB
DNBk
White Latex - Powder Free
Blue Nitrile - Powder Free
Black Nitrile - Heavy Duty
t 100% natural rubber latex
t Contoured fit
t Beaded cuff for tear resistance
t Textured grip at fingertips
t Sizes: S, M, L, XL
t Box qty: 100 pieces
t Carton qty: 10 boxes
t Durable design reduces glove tear
t Resistant to oils, detergents and
chemicals
t Rolled cuff
t Sizes: M, L, XL
t Improved resistance to oils, grease,
fuels, cleaners, solvents, chemicals, &
transmission fluid
t Stronger, thicker, and more durable
compared to regular disposables
t Textured for extra grip
t Rolled, tear resistant cuff
t Sizes: L, XL
APPLICATIONS
APPLICATIONS
APPLICATIONS
t Food and catering
t Assembly
t Light duty maintenance t Quality control
t Painting and printing t Cleaning
t Food and catering
t Assembly
t Painting and printing t Cleaning
t Industrial
t Automotive
t Painting and printing
DVBp
DVX
Blue Vinyl - Powdered
Clear Vinyl Powdered or Powder Free
t Lightly powered, contoured fit
t Suitable for latex allergies
t Reinforced in-between fingers for
strength and durability
t Rolled cuff
17
t Assembly
t Cleaning
t Available in powdered and
unpowdered
t Suitable for latex allergies
t Reinforced in-between fingers
t Rolled cuff
APPLICATIONS
APPLICATIONS
t Food and catering
t Assembly
t Cleaning
t Food and catering
t Assembly
t Cleaning
www.wsp-ie.com.au
18
PVC CHEMICAL GLOVES
Matching Gloves to Chemical Tasks
How to choose a suitable glove design when handling
dangerous chemicals? Some factors to consider are:
Dexterity required
Thicker double dipped coatings provide greater resistance to
chemicals and mechanical damage while a single dip allows
better dexterity and grip. If certain components of the task
have greatly differing requirements, it may be necessary to
use a few types of gloves simultaneously.
Cuff lengths
Extra-length gloves may be required when dealing with large
volumes of liquid which may slop over the top of a shorter
glove. Ideally the sleeve of the protective clothing and the
top of the glove should overlap as stretching forward can
leave parts of the arm exposed.
Working conditions - wet or oily?
When working in wet or oiling conditions, textured surface
finishes provide a more secure grip. Our PVC gloves are
available in a smooth (red PVC), sand textured (green PVC)
or rough-chip (black PVC) finish.
Physical hazards
The EN 388 shield featured on the PVC glove indicates its
ability to protect against mechanical damage. The higher
the EN 388 rating, the higher the resistance to abrasion,
puncture, tear and cut.
EN 374
EN 374
EN 374
EN 388
EN 388
EN 388
4121
PGR L27
4121
PGR L35
4121
PGR L45
Red PVC Glove - 27 cm
t Single dipped chemical gloves
t Resists oils, caustics, acids and
alcohols
t 27 cm length
t Interlock liner
t 35 cm length for hand and forearm
protection
t Able to handle oils, caustics, acids
and alcohols
t Interlock liner
t 45 cm length for hand and forearm
protection
t Able to handle oils, caustics, acids
and alcohols
t Interlock liner
APPLICATIONS
APPLICATIONS
APPLICATIONS
t Petrochemical refining
t General plant use
t Manufacturing
t Construction
t Mining
t Automotive
t General plant use
t Manufacturing
t Construction
t Mining
t Automotive
t General plant use
t Manufacturing
t Construction
t Mining
t Automotive
PVC CHEMICAL GLOVES
19
PGR L60
Full-Arm Gauntlet
t Single dipped chemical
gloves
t 60 cm shoulder length
gauntlet with an elasticised
top for complete hand arm
protection
t Able to handle oils,
caustics, acids and alcohols
t Flexible orange sleeves are
heat sealed to create an
impermeable barrier
t Interlock liner
EN 374
EN 388
4121
INDUSTRIES / APPLICATIONS
t Manufacturing
t General plant use
t Building and construction
Plumbing
Maintenance
Automotive
Mining
EN 374
EN 374
EN 374
EN 388
EN 388
EN 388
4121
PDG L27
t
t
t
t
4121
PDG L35
4121
PDG L45
Green PVC Glove - 27 cm
t Double dipped chemical gloves
t Sand finish for improved grip on oil
and grease covered surfaces
t Excellent resistance to oils,
t 27 cm length
t Interlock liner
t 35 cm length
t Interlock liner
t 45 cm length provides hand
and forearm protection
t Interlock liner
APPLICATIONS
APPLICATIONS
APPLICATIONS
t General plant use
t Manufacturing
t Construction
t Mining
t Automotive
t General plant use
t Manufacturing
t Construction
t Mining
t Automotive
t General plant use
t Manufacturing
t Construction
t Mining
t Automotive
www.wsp-ie.com.au
20
WELDING GLOVES
EN 388
4143
4143
4143
EN 407
EN 407
EN 407
414X4X
WKR L40
EN 388
EN 388
414X4X
WKRd L40
414X4X
WKB L40
Rhino Red Welders
Premium Red Welders
Blue & Gold Superior Welders
t A grade cow split leather
t Extra thick, heavy duty leather
t Kevlar® stitching withstands extreme
high temperatures
t 40 cm length shields forearm
t Fully lined
high temperatures
t Double lining insulates against heat
high temperatures
t Double leather reinforced palm,
thumb and knuckle bar
t Fully lined
APPLICATIONS
APPLICATIONS
APPLICATIONS
t Welding
t Heat applications
t Heavy industry
t Mining
t Foundries
t Metallurgy
t Welding
t Heat applications
t Heavy industry
t Mining
t Foundries
t Metallurgy
t Welding
t Heat applications
t Heavy industry
t Mining
t Foundries
t Metallurgy
EN 388
EN 388
4143
4143
EN 407
EN 407
414X4X
414X4X
WPY L30
WKG L40
TIG Pig Grain Welders
Green Left Hand Welders
Black & Gold Welders
t A grade pig grain leather
t Pig split leather cuff
t Reinforced thumb to index finger
and wrist
t 30cm glove length
t Sold in pairs of two left hand gloves
high temperatures
t Fully lined
high temperatures
t Fully lined
APPLICATIONS
APPLICATIONS
APPLICATIONS
t Welding
t Heat applications
t Heavy industry
t Mining
t Foundries
t Metallurgy
t Welding
t Heat applications
t Heavy industry
t Mining
t Foundries
t Metallurgy
WTB L40
t Welding
t Heat applications
t Heavy industry
t Mining
t Foundries
t Metallurgy
SPECIALTY GLOVES
HOUSEHOLD /
WASHUP
CHEMICAL
HANDLING
21
HORTICULTURAL
DE-BUDDING
EN 374
AKL
EN 388
EN 388
4001
LFOe
NFG
Latex Household Glove
Nitrile Chemical Glove
Grissly Rough-chip PVC
t Orange rubber latex glove
t Cotton flock-lined for comfort
t Beaded long cuff protects
against splashes and spills
t Fish scale embossed palm for
improved wet grip
t Sizes: 7, 8, 9, 10
t Resistant to oils, acids and solvents
t Methanol: Class 3 protection
t Sodium Hydroxide 40%: Class 6 protection
t Sulfuric Acid 96%: Class 3 protection
t Excellent abrasion resistance
t Cotton flock-lined for comfort
t Raised diamond pattern for wet/dry grip
t Sizes: 7, 8, 9, 10, 11
t Rough chip finish for secure grip on
slippery surfaces
t Jersey lined for comfort and sweat
absorption
t Knitted wrist keeps out debris
APPLICATIONS
APPLICATIONS
APPLICATIONS
t Dish washing
t Printing
t Household jobs t Painting
t Janitorial
t Gardening
t Chemical handling
t Meat processing
t Fishing industry
t Food handling
t Industrial cleaning
t Janitorial
PCB L26
tHorticultural
t Debudding
t Vineyards and
orchards
ACCESSORIES - GLOVE CLIPS
21
RTO 01
Glove Clips - Orange
t Keeps gloves conveniently at your side
t HIGH-FLEX design
t Quality fluoro orange PVC
t Extra-wide clip head to fit thick-cuffed gloves
t Inbuilt safety release
t Clips to belt loop
t Sold individually
t Box qty: 50 clips
t Carton qty: 450 clips
www.wsp-ie.com.au
22
DISPOSABLE RESPIRATORS
Disposable Respirator Standards Requirements Overview
AS/NZS 1715:1994 Selection, use and
maintenance of Respiratory protective
devices
This standard sets out the principles of respiratory
protection and makes recommendations for the
selection, use and maintenance of respirators for
personal protection against atmospheres deficient in
oxygen or against harmful substances.
AS/NZS 1716:2003 Respiratory Protective
Devices
This standard specifies requirements for respiratory
protection devices intended to provide protection
against atmospheres containing substances, which
may be harmful if breathed. The standard specifies
requirements, performance and testing criteria to be
observed in the manufacture of respirators.
Respirator Selection
P2 and P2v Disposable Respirators:
P2 dust/mist and fume respirators with adjustable
plastic nose clip and soft foam nosepiece for
comfortable custom fit. P2 designated respirators
provide protection against thermally generated fumes
and smoke when, for example, welding; soldering;
brazing; metal cutting or pouring.
P2v Disposable Respirators with valve
The P2v valve makes breathing easier, cooler and also
extends the life of the mask.
P2vc Carbon Disposable Respirator with valve
P2vc are covered with active carbon to
pre-filter organic vapours, and feature
an adjustable plastic nose clip and
soft foam nosepiece for comfortable,
custom fit. These respirators also
contain active carbon, protecting
against mechanically generated
particulates and mists of sizes
commonly encountered in industry,
and mining dusts (i.e. Coal, copper,
zinc, lead; dusts from fibreglass,
asbestos, timber, cement). The valve
adds comfort and helps to extend
the longevity of the mask.
Operating Conditions
Operational temperature range for use 0 to +50
degrees C
Disposable respirators are not suitable for use in:
t Oxygen deficient atmospheres (less than 18%)
t Atmospheres immediately dangerous to life and
health (IDLH) containing toxic gases or vapours.
t Areas where the particulate concentration exceeds
10 times the occupational exposure limit.
t Highly toxic atmospheres (refer to AS/NSZ1716)
How often should they be replaced?
Disposable respirators are designed to last throughout
an 8 hour shift. However, the effectiveness of the
respirator will deteriorate faster in hot, dusty, humid
conditions or in the presence of oil and oil mists.
Please note that respirators should not be cleaned or
reused. Instead, replace the entire mask when shift
ends or if the filter medium becomes clogged.
How should they be stored?
It is recommended to store the respirators at 20~30°C
in a clean dry environment.
DISPOSABLE RESPIRATORS
MD8620
P2 Respirator
MD8622
P2 Respirator with
Valve
Respirator Features
MD8626
P2 Respirator with
Valve & Carbon Filter
Certified Product
AS/NZS 1716:2003
Lic. No. 20566 SAI Global
Certified Product
AS/NZS 1716:2003
Certified Product
AS/NZS 1716:2003
23
MD8620
MD8622
MD8626
20 masks
10 masks
10 masks
Active Carbon coating to filter nuisance-level organic vapours
Exhalation valve to reduce hot air build up and increases comfort
Protection against mechanically generated particles
Protection against thermally generated particles
Polypropylene (PP) outer layer
Low breathing resistance
Fringe seal around edge for close fit
Adjustable plastic nose clip with soft foam nose piece
Latex free synthetic rubber head straps
Quantity per box
Fitting Instructions
1
To fit the mask, start
by holding the mask
with the nosepiece
facing up and head
straps dangling down
2
Position the mask
under the chin and
over the mouth and
nose.
3
Pull lower strap
over the head and
position below ears. Pull
top strap over the head
and position above ears.
4
Press on the
nosepiece to mould
it snugly around the
nose.
5
To test seal, cup
both hands over
the mask and exhale
vigorously. Reposition
mask and straps if air
leaks around the edges.
www.wsp-ie.com.au
SAFETY GLASSES
24
BL 231C
BL 231S
BL 231SM
Airblade Glasses - Clear Lens
Airblade Glasses - Smoke Lens
t Ultra lightweight polycarbonate wrap
around design
t Crystal clear distortion free optics
t Anti-fog/hard coated lens
t Excellent eye coverage
t Approved to AS/NZS 1337.1 for
MEDIUM IMPACT protection
t Individually packaged
t Box qty: 10 pairs
around design
t Anti-fog/hard coated lens
t Box qty: 10 pairs
Airblade Glasses - Silver
Mirror Lens
AS/NZS 1337.1
ID 5062
AS/NZS 1337.1
ID 5062
Glasses Display Stand
t Mirror attached
t Displays 6 units
around design
t Hard coated lens
t Box qty: 10 pairs
AS/NZS 1337.1
ID 5062
BL 71C
BL 71S
Clone Glasses - Clear Lens
Clone Glasses - Smoke Lens
t Crystal clear, distortion free optics
t 100% UV protection
t Hard coated lens
t Pressure free flexible temples
t Light weight construction
t Box qty: 10 pairs
t Crystal clear, distortion free optics
t 100% UV protection
t Hard coated lens
t Pressure free flexible temples
t Light weight construction
t Box qty: 10 pairs
AS/NZS 1337.1
Lic 2144
SAI Global
AS/NZS 1337.1
Lic 2144
SAI Global
SAFETY GLASSES
BL 38BM
BL 65C
Tomcat Glasses - Blue Mirror
Lens
Pitboss Safety Glasses - Clear Lens
around design
t Soft rubber temple tips
t Hard coated UV400 lenses
t Fully approved to AS/NZS 1337.1 for
t Box qty: 10 pairs
t Light weight and durable nylon frame for extended wearing comfort
t Fitted with semi-vented, closed-cell foam to provide a positive seal against dust and
other foreign matter
t Heavy duty ratchet with angle inclination enables further adjustments to
accommodate any facial contour
t Addition of air vents in frame helps reduce condensation and fogging
t Anti fog/Hard coated UV400 lenses
t Standards approved to AS/NZS 1337.1 for MEDIUM IMPACT protection
t Box qty: 10 pairs
AS/NZS 1337.1
AS/NZS 1337.1
BL 38S
BL 29C
Tomcat Glasses - Smoke Lens
Overcoat Safety Glasses - Clear Lens
around design
t Soft rubber temple tips
t Hard coated UV400 lenses
t Fully approved to AS/NZS 1337.1 for
t Box qty: 10 pairs
t One piece polycarbonate lens specifically designed to fit over prescription spectacles
t Moulded cheek/brow and side shields provide all round protection
t Co-moulded temples combined with 4 point length adjustment and heavy duty
ratchet for angle inclination enables perfect positioning over most prescription
frames
t Standards approved to AS/NZS 1337.1 for MEDIUM IMPACT protection
t Box qty: 10 pairs
AS/NZS 1337.1
25
[ Clear Lens ] BL 29C
[ Featured in Clear Lens ] 190C
AS/NZS 1337.1
www.wsp-ie.com.au
26
DISPOSABLE OVERALLS
APPROVED STANDARDS
SMS
SBB
Chemical Protective Clothing
Category III
Asbestos Rated Disposable
Overalls
Spun Bond General Purpose
Disposable Overalls
t Type 5 and Type 6 protection
t Suitable for the stripping, removal
and handling of asbestos
t Durable triple layered fabric
t Breathable material
t Elastic hood, wrist and ankle cuff
t Convenient 2-way, full length zip
t General purpose overalls ideal for
protection against dirt and grime
t Durable, economic and light weight,
material
t Elastic hood, wrist and ankle cuff
t Convenient 2-way, full length zip
WSP’s range of SMS disposable
overalls complies with the following
Work Safe codes:
TYPE 5
EN 13982-1: Resistance to
penetration by hazardous
dust and dry particles
TYPE 6
EN 13034: Barrier to light
splash and liquid spray
t Sizes: L, XL, 2XL, 3XL
t Sizes: L, XL, 2XL, 3XL
TYPE 5
t Carton qty: 50 pieces
t Carton qty: 50 pieces
TYPE 6
RAIN WEAR
CW-RL
CW-PL
CW-PO
Lime 3/4 Rain Coat
Lime Rainwear Set
Orange Rainwear Set
t Super lightweight poly-nylon material
t Fully welded, double stitched
seams for added strength and
waterproofing
t Drawstring hood secured in collar
t Breast pocket with cover flap for
mobile phone and pens
t Elastic cuffs with covering sleeves
t Breathable back for comfort
t Hip pockets with Velcro straps ensure
contents remain secure and dry
t Lime green colour
t Detachable hood and hood
compartment
t Heavy duty zips and plastic press
studs
t Fully concealed front placket
t Open pant pockets
t Elastic waist on pants
t Draw string waist on jacket.
t Lime green colour
t Detachable hood and hood
compartment
t Heavy duty zips and plastic press
studs
t Fully concealed front placket
t Open pant pockets
t Elastic waist on pants.
t Draw string waist on jacket.
t Fluoro orange colour
t Sizes: S, M, L, XL, 2XL, 3XL, 4XL
t Carton qty: 12 garments
t Carton qty: 12 sets
t Carton qty: 12 sets
27
www.wsp-ie.com.au
28
SAFETY VESTS
SVW 101
SVW 201
Orange Safety Vest - Day Use
Lime Safety Vest - Day Use
t Lightweight woven polyester
t Velcro closure
t Class D - AS/NZS 4602:1999
t Day compliant
t Sizes: M, L, XL, 2XL, 3XL
t Carton qty: 50 vests
t Velcro closure
t Class D - AS/NZS 4602:1999
t Day compliant
Complies to
AS/NZS 4602:1999
Complies to
AS/NZS 4602:1999
SVW 103
SVW 203
Orange Safety Vest - Day/Night Use
Lime Safety Vest - Day/Night Use
t Velcro closure
t Engineer grade silver reflective tape
t Class D/N - AS/NZS 4602:1999
t Day and night compliant
t Lightweight woven polyester vest
t Velcro closure
t Engineer grade silver reflective tape
t Class D/N - AS/NZS 4602:1999
t Day and night compliant
Complies to
AS/NZS 4602:1999
Complies to
AS/NZS 4602:1999
RAILWAY WORK: Also available in X-backed design high visibility tape
Australian Standards for High-Visibility Safety Garments
AS/NZS 4602:1999 specifies the visual
Class D: Garment designed for outdoor daytime use only, comprising
requirements for high visibility safety
garments to be worn during daytime and
night-time.
Class N: Garment designed for night-time use only. Comprising
All reflective tape used on WSP’s safety
garments are approved to the high visibility
requirements outlined in AS/NZS 4602:1999.
Class D/N: Garment designed for both day and night use, comprising
retroreflective elements on a fluorescent or other non-retroreflective
high visibility background material.
fluorescent or other non-retroreflective high visibility material.
retroreflective elements on an unspecified background.
WHEEL CHOCKS
29
A must-have for any
loading dock environment
Wheel chocks guard against
trailer roll or shift while loading
or unloading.
Our moulded wheel chocks
are sloped to increase holding
capacity for full tire contact as
they roll onto the chock face.
BWB 03t
BWY
Black Rubber Wheel Chocks
Yellow Wheel Chocks
t Durable black rubber wheel chock
weighs in at 3.0 kg
t Hi-vis yellow tape on chock face for
reversing vehicles
t 160 mm wide chock face for trucks/
large tyres
t Suitable for vehicles up to 10 tonnes
t Moulded carry handle
t Sold individually
t Moulded from quality plastics
t 150 mm wide chock face
t Suitable for passenger cars and
caravans
t Stacks together for convenient
storage
t Sold individually
SAFETY TAPE & BARRIER MESH
BTY
BTC
BTMo
Hazard Stripe Tape Yellow and Black
Caution Tape
Barrier Mesh - Orange
t Creates a quick and effective visual
fortress around temporary hazards
t Lightweight
t Can be tied, stapled or nailed to
posts, fences or barricades
t Suitable for outdoors and indoors
t 75 mm wide
t 100 metre roll
t Vibrant orange colour due to
enhanced UV plasticising technology
t 1 metre high mesh
t 50 metre roll
t Lightweight
t Can be tied, stapled or nailed to
posts, fences or barricades
t Suitable for outdoors and indoors
t 75 mm wide
t 100 metre roll
29
www.wsp-ie.com.au
30
TRAFFIC CONES & BOLLARDS
Traffic Cones:
Quality Guarantee
Shape Retaining
WSP’s traffic cones are
constructed from memory
retaining PVC that reforms
to their original shape even after being run over
by vehicles up to 1 tonne.
UV Stabilised
In addition, all our PVC
materials for our traffic
cones come with a year
manufacturer’s warranty
against colour fading.
BCO 300
BCO 450
BCOw 710
Plain Traffic Cone - 300 mm
t High quality fluoro orange cone
t Made from memory retaining PVC
that reforms to original shape
t Sturdy black base made from
recycled rubber
t 300 mm height
t Idea for mine blasting cones
t Sold individually
recycled rubber
t 450 mm height
t Sold individually
Wide Body
t Wider cone for easy stacking and
unloading
recycled rubber
t 710 mm height
t Sold individually
TRAFFIC CONES & BOLLARDS
BCO 450t
BCOw 710t
BBO 09t
Traffic Cone with Reflective
Tape - 450 mm
Traffic Cone with Reflective
Tape - 710 mm Wide Body
Bollard with Reflective Tape
t Class 1 reflective tape fully compliant
to AS/NZS 1906.1:2012
recycled rubber
t 450 mm height
t Sold individually
to AS/NZS 1906.1:2012
t Wider cone for easy stacking and
unloading
recycled rubber
t 710 mm height
t Sold individually
31
t Fluoro orange PU post
t Sturdy 8 kg black base made from
recycled rubber
to AS/NZS 1906.1:2012
t 2 piece construction with handle for
convenient transport
t 1150 mm height
t Sold individually
t *Note: Bollard posts and base can be
sold separately
MEASUREMENTS
Height
Base width
Cone
diameter
Top opening
diameter
Weight
BCO 300
300 mm
220 mm
140 mm
29 mm
1.1 kg
BCO 450
450 mm
270 mm
190 mm
29 mm
1.5 kg
BCOw 710
710 mm
360 mm
260 mm
33 mm
3.3 kg
BCO 450t
450 mm
270 mm
190 mm
29 mm
1.5 kg
BCOw 710t
710 mm
360 mm
260 mm
33 mm
3.3 kg
1150 mm
420 mm
-
-
9.0 kg
Product Code
Plain Traffic Cones
Traffic Cones w/ Tape
Traffic Bollards w/ Tape
BBO 09t
www.wsp-ie.com.au
32
OUR COMPANY
Our mission:
OFFER quality safety products and efficient service
DELIVER value to customers through a dedicated team of individuals
ENSURE our customers receive the highest level of safety protection
Driven by our mission, WSP (Workforce Safety
Products) is now a market leader and continues to
introduce innovative product lines to the Australian
Safety Market.
Our remarkable manufacturing strength and
experienced research and development team allows us
to produce products of high quality and competitive
prices.
15 years of experience in the Australian PPE
industry
Certified Quality
WSP was founded in 1997 in Perth, Western Australia.
Since then, we have grown into a recognised
organisation in the Australian Safety Market. With a
wide range of products from general purpose gloves
to specialty gloves, we strive to meet the needs of all
our customers.
Product Innovation in Partnership with our
Customers and Manufacturers
Working closely with our manufacturing partners and
listening to customers needs, we continue to innovate
our product lines to introduce revolutionary products
into the Australian market.
WSP has built a joint venture with one of China’s
largest glove manufacturer’s, QS Glove company.
In our mission to ensure the highest level of
safety protection, our trade partners must possess
international recognised certification, manufacturing
experience and a proven history of quality assurance.
Our trade partners are certified under ISO 9001:2000
and ISO 14001, couple this with our ISO 9001
accreditation, our customers can be guaranteed top
quality products.
PRODUCT RESEARCH & DEVELOPMENT
Testing and Research & Development Centre
International Joint-Ventures
“Introducing new products that
deliver effective and efficient solutions
tailored to the safety challenges faced
by today’s industry”
Founded in 1993, QS Safety has been expanding
its offerings to the industrial markets with full lines
of safety gloves. Today, QS Safety has become the
leading manufacturer of safety gloves. The company
owns 8 Plants with 4,100 employees and produces
over 200 million pairs of gloves annually.
33
QS Safety is the first glove manufacturer in China to
receive ISO 9001 & 14001 certification, the toughest
standard of manufacturing quality in the world. All
factories continuously meet OEM factory standards.
We are far from your typical PPE importing business.
Our integration and inhouse access to testing
and R&D centres with our international partners
are considered one of our key strengths. As such,
we are able to work closely with our clients and
manufacturing partners to design and deliver safety
products tailored to the specific demands of their
industries.
As a comprehensive gloves manufacturer, QS houses
PU, nitrile and PVC glove factories as well as knitting
facilities and tanneries for producing raw materials.
Recent developments include the TAEKI 5 range of
highest cut resistant gloves and the water based
Miizu.
In addition, these testing abilities cover the entire
design and manufacturing process - from raw
materials to finished products. Tests can be conducted
across the full range of mechanical or chemical risk
factors to the strict specifications required of ISO, CE
or ANSI standards. It has become the backbone of our
quality control system.
www.wsp-ie.com.au

safety - Workforce Safety Products

Transcription

Similar documents

Item 64-0127

Saebo Long Term Care Program

Roof DRainage SyStemS Gutter Guards

Part 1 - Serpo.org

The Caledonian Society of Cincinnati`s

Saebo Evaluation and Treatment Kit

NCLI Merchandise - Pheasants Forever

McCordick - Promocan.com

BEVEL EDGE RUBBER FLOOR MAT PinEAPPLE CORER ROUnD

K-CUPS $15/BOX OF 12