hearing pr o tection - NZ Safety Online Catalogue

Transcription

An on-site noise
survey is the first step
in minimising noise
induced hearing loss.
*ACC statistics 2012.
Don’t gamble with safety.
HEARING PROTECTION
A quarter of the
NZ workforce are
affected to some
degree by harmful
noise at work.*
119
HEARING PROTECTION
STEP 2 – DETAILED ASSESSMENT
If the preliminary noise survey averages
over 84dB over an 8 hour period a
detailed assessment is required.
A formal noise survey should be carried
out by an occupational hygienist
or specially trained occupational
health nurse.
The assessment will:
(a) Q uantify the amount of noise to
which employees are exposed
Noise Induced Hearing Loss may not
be noticed for many years, until the
damage has been done and the
symptoms become a problem for the
sufferer – and those around them.
That’s why it is important to proactively
reduce excessive exposure to noise to
prevent hearing loss.
NOISE EXPOSURE TIMES
Understanding noise
and exposure times
If the noise source
is doubled
83dB
The noise level only
goes up 3 dB
86dB
Small increases in
decibel level
89dB
Represent enormous
increases in noise level
and risk
92dB
Your exposure time to noise is also an
important factor in selecting protection
levels. The class system rating is based
on an 8-hour exposure. Anything
beyond 8 hours exposure time and the
protection level needs to increase.
(c) H
elp in developing noise control
strategies
(d) Determine appropriate hearing
protector needs
STEP 3 – CONTROL
ELIMINATE – if practicable, control noise
at source
ISOLATE – where practicable move
noise sources away from employees
MINIMISE – Provide hearing protectors
or use enclosures to reduce the
amount of noise emitted.
STEP 4 – HEARING PROTECTORS
If hearing protectors are being used as
a control, you must consider
1. S taff education as to the need for
hearing protectors
2. Define hearing protector areas
with signage
3. P
rovide a selection of hearing
protectors (not one will fit all)
4. Issuing hearing protectors to
individuals and validation of the fit to
the individual user
5. C
leaning and maintenance of
hearing protectors
6. T raining and education for people
wearing hearing protectors.
STEP 5 -MONITORING
Monitor the health effects of noise in
the workplace (hearing testing) and
notify any serious harm (any signs
of hearing loss). An occupational
hygienist or specially trained
occupational health nurse should
conduct testing:
This class system simplifies selection
processes of hearing protectors.
The SLC80 (Sound Level Conversion) is
a laboratory estimate of the amount
of attenuation (noise reduction)
achievable by 80% of informed users
with a particular hearing protector.
Being a population based rating some
users will get more attenuation and
some will get less.
110 dB
CLASS 5
STEP 1 – NOISE SURVEY
Conduct a preliminary noise survey to
identify any possible noise hazards.
(b) Identify sources of noise
NOISE-INDUCED HEARING LOSS (NIHL) IS
THE MOST COMMON, PERMANENT AND
PREVENTABLE OCCUPATIONAL INJURY IN
THE WORLD.
World health organization report on
occupational noise.
The decibel scale is a logarithmic
scale so small numerical changes
represent enormous physical changes.
An increase of 3dB from 83dB to 86dB
is double the noise and 86dB to 89dB is
double that again.
120
Understanding the
class system and
SLC80 rating
FOR EXAMPLE
Pneumatic
Chipper 106 dB
105 dB
CLASS 4
HEARING PROTECTION
HEARING LOSS
Five step programme
FOR EXAMPLE
Impact Wrench
102 dB
100 dB
EXTREMELY LOUD
CLASS 3
ASK OUR NZ SAFETY STAFF ON HOW TO
SET UP A NOISE CONTROL PROGRAMME
CLASS SYSTEM
FOR EXAMPLE
Bulldozer
100 dB
95 dB
FOR EXAMPLE
CLASS 2
THE APPROVED CODE OF PRACTICE FOR
THE MANAGEMENT OF NOISE IN THE
WORKPLACE 2002
States that “Immediately it is known that
employees are being exposed to noise
that exceeds the exposure limits, an
employer must develop and implement
a noise control programme.”
HEARING PROGRAMME
Industrial
Fire Arm 95 dB
(i.e. Ramset Nail Gun)
Table Saw 93 dB
90 dB
CLASS 1
CODE OF PRACTICE
FOR EXAMPLE
Forklift 87 dB
85 dB
If the average eight
hour noise exposure is at
or above 85dB hearing
protection is required.
(a) B efore an employee starts work
(b) At intervals of no longer than
12 months thereafter
(c) A
lso recommended for employees
exiting a business
Notify WorkSafe New Zealand
of serious harm (any signs of
hearing loss).
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
HEARING PROTECTION
HEARING PROTECTORS
TYPES OF EARPLUGS
Considerations
when selecting
hearing protectors
Disposable
foam earplugs
Corded
earplugs
Earplugs are required
to be rolled down
between thumb and finger before
fitting into the ear canal.
Available in both
foam disposable
and re-usable ranges.
1. COMFORT
Will the wearer be comfortable
wearing the protector. Consider the
conditions worked in, is it hot or
cold etc
2. NOISE REDUCTION
Will the protector reduce the noise
level enough
3. SIZE
Will the earplugs fit correctly in the ear
canal. Not too loose or too tight
4. COMMUNICATION NEEDS
Are there audible warnings or alarms
that need to be heard
5. SPECIAL JOB REQUIREMENTS
Is there restricted access or object
that could limit size of the protectors
6. CLEANLINESS
Will the wearer be working in a
hygienic or toxic area and need to
dispose of the protector
7. COMPATIBILITY WITH OTHER PPE
Helmets, shields, hats, glasses etc.
All need to be considered
IN NZ HEARING PROTECTORS ARE
REQUIRED TO BE CERTIFIED TO THE
AS/NZS 1270: 2002 ACOUSTICS HEARING PROTECTORS STANDARD.
• This creates an exceptionally good fit
• Provides a high level of protection
• Are compatible with most other PPE
• Do not hold in heat around the ear
Wearing hearing protectors
that block too much noise
(overprotection) has a
negative effect.
Re-usable
earplugs
Audiologists often see more hearing
loss in workers who ‘cheat’ on the fit
and wear time of their earplugs.
Earbands
Re-usable plugs do
not require roll down.
Earplugs held in to the ear canal by a
head band.
• Hygiene is maintained with no
contact required with the inserted
part of the Plug
•C
omfortable fit for most wearers
• Can be washed and re-used with
a life span of up to three months,
providing great value
•E
asy to put on and off
• Ideal for intermittent use
•H
ave lower protection levels
TYPES OF EARMUFFS
Passive
earmuffs
Use a combination
of clamp force, seal
around the ear and an
outer shell as a physical
barrier to keep out
harmful levels of noise.
environment by allowing safe level
sounds to be heard
• T his allows wearers to hear important
communication from co-workers,
alarms and warning signals at a safe
amplified level
• Ideal for working in busy workplaces
with multiple hazards
Communication
hearing earmuffs
• Harder to lose than plugs
Allow the wearer to communicate
clearly via two way radios or mobile
phones whilst being protected from
high noise levels.
• On the negative side, earmuffs can
be bulky and become uncomfortable
to wear in hot environments
• They enable clear oral communications
in high noise environments that would
not normally be possible
• Easy to fit and more likely to obtain
the protection levels
Overprotected workers typically
compromise the fit of their protector
by pulling the earplug out partway,
or lift up the cup of the earmuff to
hear instructions from co-workers,
maintenance sounds from the
machinery, warning signals etc.
•C
an be hung round the wearer’s neck
when not in use
• Conversely, If hands are dirty when
rolling down the plugs, hygiene can
be compromised
• Robust and minimal maintenance
needed, with replacement of
seals and foam inserts required
approximately every six months
Over protection
•C
ords keep the plugs more secure
and joined helping to prevent
contamination of product
Level
dependent
earmuffs
HEARING PROTECTION
Noise reduction is one of many factors in
determining the best hearing protector
for a noise-exposed worker.
• S ome models
offer hands free
operation
Have forward facing
microphones on the
earmuff cups.
• Enhances user
awareness of their
121
HEARING PROTECTION
Universal earplug
protection
verification
HEARING PROTECTION SIGNAGE
CODE 1
83377L 250x300 PVC
185787P 500x600 PVC
180165P 450x600 C/F
182362P 100x120 SAV 10 pack
HEARING PROTECTION
3M™ E-A-RFIT™ EARPLUG
VALIDATION SYSTEM
The E-A-Rfit™ validation system uses
dual microphones to measure the
true noise reduction (attenuation) of
earplugs that have been fitted by
the wearer.
NOISE INDICATOR
The 3M Noise Indicator alerts users to potentially dangerous noise levels, helping them
identify areas where they may need to wear
hearing protection.
• Red Flashing LED: Noise levels are equal to
or above 85 dBA - hearing protection may
be required
• Green Flashing LED: Noise levels are below
85 dBA - hearing protection may not be
necessary
CODE 4
06394 Noise indicator
406517 USB cable/charger
VeriPRO™ is a portable
testing device that can
measure actual
attenuation levels
(sound reduction).
•W
orks with earplugs
from any manufacturer
•C
reates and stores
employee Personal
Attenuation Ratings
•P
rovides employees with training
on earplug fitting
• Sophisticated, user-friendly software
Measure the
noise reaching
the inner ear
QuietDose™ is the first noise level
monitoring system that uses in-ear
dosimetry to measure every sound
that reaches the users eardrum.
• It provides a training tool for
proper insertion techniques and
assesses proficiency
• Used to refit or retrain as required
after standard threshold shifts
(STSs) are detected (STSs are the
loss of hearing picked up in annual
audiometric testing)
• Motivates employees - real time
results help to educate if earplugs
are fitted correctly.
THE ACTUAL EFFECTIVENESS OF
A USERS HEARING PROTECTOR
CAN VARY PERSON TO PERSON SO
THE CODE OF PRACTICE REQUIRES
VERIFICATION OF ‘THE FIT TO
THE USER’.
SOUND DETECTOR KIT
Compact, lightweight sound level meter.
Measurements include sound pressure level
(SPL), average value (LEQ /LAVG), LED alert
(with hearing protection icon), maximum
value (MAX), minimum value (MIN), run-time,
overload (OL), and under-range (UR)
Ideal for initial noise assessments.
CODE 4
07223 Sound Meter
407224 Wind Screen
407225 Tripod
407226 USB Cable Charger
122
•D
etermine whether workers
are using their earplugs or
earmuffs correctly
• T rack and address the potential of
noise-induced hearing loss (NIHL)
in real time
•P
rovide workers more appropriate
hearing protectors
• Fulfils
the requirements of the
“New Zealand Code of Practice
for Management of Noise in
the Workplace”
HEARING PROTECTION
AIRFLOW, COOL COMFORT EARMUFFS
LEADING TECHNOLOGY
CLASS 5
34dB
SLC 80
MOLDEX MX-6
• Class 5, 34dB
CODE 410981
MX-6 & MX-5
COMMON FEATURES
• Cushion-ribbed open air headband for airflow providing cool comfort
•Larger cup openings to fit almost all ears
MX-6 EXCLUSIVE WAFFLED CUP FOAM
DELIVERS CLASS 5 34dB PROTECTION
• Extra soft foam/low pressure ear cushions provide more comfort
• L ightweight wire frame allows easy cup adjustment yet holds its position for
long work periods
• Glossy surface for easy cleaning
HEARING PROTECTION
CUSHION-RIBBED OPEN AIR HEADBAND
FOR AIRFLOW COOL COMFORT
CLASS 5
32dB
SLC 80
YOU MAY ALSO BE
INTERESTED IN:
GO TO PAGE
MOLDEX MX-5
• Class 5, 32dB
133
SPARKPLUG®
& PLUGSTATION
CODE 410980
123
PASSIVE EARMUFFS
LEIGHTNING TECHNOLOGY
CLASS 5
CLASS 5
Air Flow
Control™
technology
HEARING PROTECTION
Earmuffs traditionally
attenuate (block
out noise) very well
in high frequencies,
but poorly in low
frequencies. Howard
Leight’s patented Air Flow Control™
technology (AFC), delivers superior
low-frequency attenuation allowing
surrounding sounds like alarms,
warnings and co-workers to be heard
more naturally.
How it works
LEIGHTNING® L1
OVER-HEAD EARMUFF
LEIGHTNING® L1H
HELMET MOUNTED EARMUFF
• Steel wire construction with
foam padded headband
• Air Flow Control Technology™
• Low profile ear cup
• Class 5 SLC(80) 29dB
• Steel wire construction
NOTE: Helmet not included
CODE 4
01567 Earmuff
401715 Hygiene kit
CLASS 5
CODE 4
01568 Earmuff
402403 Earmuff hi-viz
401715 Hygiene kit
CLASS 5
Inside the snap-in AFC ear cushion,
a series of holes allows the cushion
to breathe more effectively and
channels the air out of the base
cushion, much like a car shock
absorber. The controlled flow of
air dampens low-frequency
vibrations whilst maintaining
excellent high frequency
attenuation. AFC technology is a
standard feature on all Leightning ®
& Sync™ series earmuffs.
LEIGHTNING® L2F
FOLDING EARMUFF
• Steel wire construction with
folding headband
Air flow from the Cushion improves
attenuation over the frequency range
CODE 4
01569 Earmuff
401716 Hygiene kit
CLASS 4
LEIGHTNING® L1N
NECKBAND EARMUFF
• Behind the neck format for wearing with
helmets and head gear
CODE 4
01636 Earmuff
401715 Hygiene kit
CLASS 4
ACC E S S O R Y
HOWARD LEIGHT HYGIENE KITS
For extended earmuff performance and
improved hygiene.
• Recommended replacement every
six months with general use, more
frequently with heavy use
CODE 4
01715 for L1 earmuff range and L0F earmuff
401716 for L2F earmuff
124
LEIGHTNING® L0F
FOLDING EARMUFF
• Ultra slim profile ear cup
• Folding headband provides
compact storage
CODE 4
03238 Earmuff
401715 Hygiene kit
MACH™ 1 EARMUFF
• Provides adequate protection at low cost
• Lightweight providing comfort for short and
long term wearers
• Dielectric - safe for electrical environments
CODE 501073 Earmuff
PASSIVE, ACTIVE & RADIO EARMUFFS
CLASS 4
CLASS 5
LEIGHTNING TECHNOLOGY
Sound Management
Technology™ (SMT)
• Unique dual headband design
• Comfortable over-head design
• Sound Management Technology™
• Radio volume does not exceed 82dB
• Features digital tuning with LCD display
• 10 pre-set channels
• Volume memory
• Aux input can connect to MP3 players and
other portable audio devices
CODE 4
01669 Earmuff
817HY Hygiene kit
CODE 4
04219 Earmuff
406796 Hygiene kit
CLARITY® C1 OVER-HEAD EARMUFF
CLASS 4
Dielectric Construction
Robust non-deforming construction
protects employees in electrical
environments. Available in Clarity ®
and Mach™ 1 models.
CLASS 5
ACCESSORY
SYNC™
ELECTO EARMUFF
CLARITY® C1F FOLDING EARMUFF
• Folding design provides compact storage
CODE 4
01671 Folding earmuff
817HY Hygiene kit
CLASS 4
CLASS 5
CODE 4
10293 Headband earmuff
410294 Helmet attached
406796 Hygiene kit
CLASS 5
CLARITY® C1H & C3H HELMET
MOUNTED EARMUFF
• Earcups snap-lock in place during use and
rotate back when not in use
• C1H Class 4 SLC(80) 24dB
• C3H Class 5 SLC(80) 27dB
NOTE: Helmet not included
CODE 4
01670 C1H
817HY Hygiene kit
401674 C3H
847HY Hygiene kit
• Radio volume does not exceed 82 dB
• Directionally placed stereo microphones
amplify and enhance sound
• Aux input can connect to MP3 players and
other portable audio devices
• 10 pre-set channels
• Separate controls for sound amplification
and radio volume
COOL PAD ABSORBENT PADS
• Sweat absorbing earmuff pads for
increased comfort in hot and humid
conditions
• Will fit all earmuffs
CODE 3
455 Pack 100
3456 Pack of 5
HEARING PROTECTION
SYNC™ RADIO
HI-VISIBILITY EARMUFF
Patented SMT blocks harmful noise
while allowing surrounding sounds
like alarms, warnings and co-workers
to be heard more naturally. SMT is
a feature of Clarity ® and Impact ®
Sport models.
CLASS 4
SYNC™ STEREO EARMUFF
Sync is a stereo earmuff that provides a
high level of hearing protection, high-fidelity
sound, and allows you to listen to portable
audio devices safely at work and at home
• No batteries required, plug and play
• MP3 volume does not exceed 82dB depending on MP3 input
NOTE: MP3 not included
CODE 4
06791 Earmuff
407146 Hygiene Kit
IMPACT® SPORT EARMUFF
• Ultra-slim profile
• Amplifies ambient sound to a safe 82dB
and allows directional hearing
CODE 4
04218 Earmuff
406796 Hygiene kit
125
PASSIVE EARMUFFS
PELTOR EARMUFFS
CLASS 5
CLASS 5
3M’s Peltor™ earmuffs acoustic
engineered, wearer-focused
design, and performance versatility
has made Peltor™ the leading
international name in earmuff
protectors for over 50 years.
PELTOR™ H7F FOLDING EARMUFF
HEARING PROTECTION
• Ultra-light weight folding earmuff
• Liquid & foam filled cushions provide a
quality noise seal with low pressure for all
day wearer comfort
• Pivot for consistent fit
• M ulti position designs meet
virtually every application need
and wearer preference
CODE H
7F Earmuff
H7HY Hygiene kit
CLASS 5
PELTOR™ H7BV
NECKBAND EARMUFF
• Light weight neck band earmuff
quality noise seal and low pressure comfort
• Stainless steel headband wires with four
point suspension helps distribute pressure
CODE H
7BV Earmuff
H7HY Hygiene kit
CLASS 5
• L iquid and foam filled cushions,
broad, soft rings for a better
seal (even with eyewear) and
better comfort
• Padded wide headband with
four point steel suspension band
cushions the head while the
suspension distributes consistent
pressure throughout the life of the
product. Stainless steel construction
resists bending and warping
PELTOR™ H7A HEADBAND EARMUFF
• High quality earmuffs that meet the protection needs of most working environments
• Stainless steel wires with four point suspension helps distribute pressure evenly
CODE H
7A Earmuff
H7HY Hygiene kit
• Earcup Pivot Points allow wearers
to tilt and adjust earcups for
optimum comfort and efficiency
CLASS 5
PELTOR™ H10A
HEADBAND EARMUFF
• Extreme noise protection with exceptional
wearer comfort
CODE H
10A Earmuff
H10HY Hygiene kit
CLASS 4
• Hygiene kits with two attenuating
cushions and snap-in sealing
rings are available for all Peltor™
earmuff models
THE STANDARD BY WHICH
OTHER EARMUFFS ARE JUDGED
126
PELTOR™ H7P3 HELMET ATTACHED
EARMUFF
PELTOR™ H10P3
HELMET ATTACHED EARMUFF
• Helmet attachment for slotted helmets
• H7P3M fit the 620 and 410 helmets
• H7P3G fit the 630 and 610 helmets
• Helmet attachment for slotted helmets
• H10P3M fit the 620 and 410 helmets
• H10P3G fit the 630 and 610 helmets
CODE H
7P3M Earmuff
H7P3G Earmuff
H7HY Hygiene kit
CODE H
10P3M Earmuff
H10P3G Earmuff
H10HY Hygiene kit
PASSIVE EARMUFFS
CLASS 5
CLASS 5
PELTOR™ X SERIES
The Peltor X Series earmuffs combine
high noise attenuation performance
with comfortable and
compact design.
• L ightweight earcups provide
excellent compatibility when
used with other personal
protection products
PELTOR™ X5A HEADBAND EARMUFF
• Extremely slim and lightweight earcups
• Dielectric on headband model X4A
• Earcups tilt for optimum comfort
and efficiency
• Lightweight with excellent balance and
comfort
• Dielectric (non conductive)
• Ideal for high-noise exposure applications
CODE 4
10179 Headband
410180 Hygiene kit
CODE 4
10178 X5A Headband
410181 Hygiene kit
CLASS 5
• New specially-formulated foam
earcup inserts and cushions help
boost the noise absorption
CLASS 5
• Electrically insulated (dielectric) wire
headband on X4A & X5A models
• Earcups tilt for optimum comfort
and efficiency
PELTOR™ X4P3G
• Extremely slim and lightweight earcups
• New foam earcup inserts and cushions help
boost the noise absorption
• Earcups tilt for optimum comfort and
efficiency
• Lightweight earmuff recommended for
moderate to high-noise exposure applications
• Class 5 SLC80 27dB
CODE 4
410180 Hygiene Kit
• Twin headband design helps
reduce heat build-up with good fit
and balance
PELTOR™ X5P3G
• Unique attenuation as a result of speciallyformulated foam featured in the earcups
and cushions
• Earcups tilt for optimum comfort and efficiency
• Very high attenuation earmuffs recommended
for high-noise exposure applications
• Comfortable and constant pressure
during prolonged usage, combining
comfort and protection
• Recommended for moderate to
high-noise exposure applications
CODE 4
410181 Hygiene kit
HEARING PROTECTION
PELTOR™ X4A HEADBAND EARMUFF
Don’t be the
victim of hearing
loss caused by
worn earmuff
cushions
HEADGEAR COMBINATION
FORESTRY MESH
• A versatile and comfortable solution
for wearers who require face and
hearing protection
• Headband-adjustable
• Forestry model has a stainless steel mesh visor
• Peltor™ Slimline Earmuffs Class 4
CODE 4
11074 G500 Forestry Combo
411075 5C Replacement Mesh Visor
406395 Hygiene kit for earmuffs
Cushions and foam insert should be
replaced twice a year with normal
usage. Worn out earmuff cushions
reduce hearing protection significantly.
PELTOR™ H510 KID’S EARMUFF
CODE 410180
• Light weight and comfortable to wear
• Suitable for children up to the age of seven
• Neon Green or Pink for high visibility and fun
CODE 4
02599 Pink earmuff
402599 Green earmuff
H6HY Hygiene kit
127
PASSIVE EARMUFFS
HEARING PROTECTION
CLASS 4
CLASS 3
PELTOR™ H6A HEADBAND EARMUFF
PELTOR™ H61 EARMUFFS
• Light weight, comfortable and slim line
• Traditional headband for over the head wear
• Light weight, comfortable, slim line ear cups
• Wide liquid foam filled ear cushions
CODE H
6AV Earmuff
406395 Hygiene kit
CODE H
61FV Folding Earmuff
406395 Hygiene kit
CLASS 5
CLASS 3
PELTOR™ H505B WELDERS EARMUFF
• Designed to fit under welding helmets
• Low profile and light weight
CODE 408297 Earmuff
CLASS 5
PELTOR™ H6F FOLDING EARMUFF
PELTOR™ H61 EARMUFFS
3M™ 1426 EARMUFF
• Folding headband provides compact storage
• Light weight, comfortable, slim line ear cups
• Wide liquid foam filled ear cushions
CODE H
6FV Earmuff
406395 Hygiene kit
CODE H
61BV Earmuff
406395 Hygiene kit
• Entry level earmuffs
• Headband styles
• Lightweight and durable
•Class 5 SLC(80) 26dB
CLASS 4
CLASS 5
PELTOR™ H6BV NECKBAND EARMUFF
• Neckband for compatibility with head
worn PPE
CODE H
6BV Earmuff
406395 Hygiene kit
128
CLASS 4
PELTOR™ H9A-02
FOOD INDUSTRY EARMUFF
• Virtually crease-free to reduce accumulation of
particles that may produce bacteria growth
• Cushions and inserts made of a polymer that
minimise condensation in most environments
CODE 408473 Earmuff
CODE 408101 Earmuff
CLASS 5
3M™ 1436 EARMUFF
• Designed for moderate to high noise exposure
• Folding styles
• Provides a high degree of comfort
CODE 408102
RADIO & ACTIVE LISTENING EARMUFFS
CLASS 5
PELTOR™ WORKTUNES DIGITAL
• Hands-free Voice Assist feature guides
you to your favorite stations and helps
you program new ones
• Bass Boost option
• Save up to 50 preset stations
• Automatic shut off helps conserve
your batteries
• Recessed MP3 and two-way radio jack
• Output sound level limited to 82dB to
protect your hearing
CODE 4
10935
410984 Hygiene kit
CLASS 5
CLASS 5
PELTOR™ PUSH TO LISTEN™ EARMUFF
PELTOR™ WORKTUNES™ PLUS
RADIO EARMUFF
• AM/FM radio
• Cup microphones provide amplification of
low level sounds
• Audio input jack for MP3 players
• Runs on 2 x AA batteries
CODE 4
02763 Earmuff
402962 MP3 Audio Cord
402963 Cord with 2.5mm plug for 2 way
402964 Cord with 3.5mm plug for 2 way
HY79 Hygiene kit
CLASS 5
• Pushing the button on the earcup activates
the listening mode
• Allows the wearer to hear speech and
other low level sounds
• Stays in listening mode for 30 seconds
• Provides full protection even when in
listening mode
• Eliminates the need to lift the earcup to
hear speech
CODE 4
401751 Helmet attach earmuff
HY79 Hygiene kit
CLASS 4
HEARING PROTECTION
CLASS 5
PELTOR™ SPORTTAC™ EARMUFF
PELTOR™ WS PRO-TAC™ XP EARMUFF
PELTOR™ PRO-TAC™ II EARMUFF
• The Bluetooth function enables work with
both hands free while taking calls via
DECT- or mobile phones
• The ambient listening function lets the user
hear surrounding noise and converse with
colleagues
• The headset provides effective noise
attenuation when sound level is high
• DSP (Digital Noise Reduction)
• Advanced VOX (Voice Operated Transmit
• Improves communication and safety
• Level dependent function in stereo that
lets you hear ambient sound: conversation,
machine sounds and warning signals
• Last setting is stored when switched off
• Low battery warning signal
• Automatic shut-off after two hours if no
function is used
• Battery life is approximately 1000 hours
(AA Batteries)
• Class 5 30dB
• Developed specifically for hunting and
sport shooting
• Smooth level dependent function, which
eliminates abrupt sound cut-off
• Interchangable shells makes it easy to
change colour
• Collapsible design for easy storage
• Input jack, allows you to connect to
selected 2-way radios or other electronic
audio devices
• Water resistant exterior
CODE 4
10931 Earmuff
HY79 Hygiene kit
CODE 4
04774 Earmuff
HY79 Hygiene kit
CODE TACT6 Earmuff
406393 Hygiene Kit
129
COMMUNICATION EARMUFFS
HEARING PROTECTION
CLASS 5
CLASS 5
PELTOR™ LISTEN ONLY EARMUFF
PELTOR™ WS XP™ EARMUFF
• Class 5 hearing protection that allows you to
listen to radio communications while working
• Headset - speaker in each earcup wired
in mono
• All styles fit most VHF/UHF radios with either
a 2.5mm or 3.5mm accessory power pack
• Wireless connection to phones or
communication radios using
Bluetooth™ technology
• Up to 10 metres range without losing contact
• Volume and answer button on the shell
• Electret speech microphone with noise
compensation for clear and reliable
communication
CODE 1
07660 3.5mm Jack Earmuff
107663 2.5mm Jack Helmet
Attach Earmuff
107661 2.5mm Jack Earmuff
HY79 Hygiene kit
CLASS 5
CLASS 5
CODE 4
10930 Earmuff
HY79 Hygiene kit
CLASS 5
PELTOR™ LITE-COM PLUS
HEAD BAND EARMUFF
PELTOR™ FLEX LEAD EARMUFF
• 2-Way headband headset with boom
microphone for use with VHF/UHF radios
• Uses Direct plug-in flex lead
• Designed for high noise areas
• Noise-cancelling microphones reduce
background noise during transmission
CODE 4
10985 Head Band Earmuff (flex lead required)
410986 Helmet attached Earmuff
(flex lead required)
HY79 Hygiene kit
130
PELTOR™ 2 WAY COMMUNICATION
EARMUFF
• 2-Way headband headset with boom
microphone for use with VHF/UHF radios
• Designed for high noise areas
• Noise-cancelling microphones reduce
background noise during transmission
CODE 1
07668 Headband model (In-Line PTT adaptor required)
HY79 Hygiene kit
• Designed for people who work in teams or
groups, where communication is essential
• Built in two-way radio communication
69 channels (LPD 433 MHz) 121 subchannels
• Level dependent function for ambient
listening
• Separate PTT (push to talk) button for the
auxiliary input, where a mobile phone, radio,
or other audio source can be connected
• Rechargeable lithium-ion battery with 20
hours operating time
• Voice operated transmission (VOX)
• Auto power off function
• Battery status indication
• Voice guided menu system
• Class 5 SLC(80) 31dB Headband and
Helmet attach
• Class 5 SLC(80) 30dB Neck band
CODE 4
410933 Neckband earmuff
410934 Helmet attach earmuff
HY79 Hygiene kit
EARPLUGS
CLASS 5
CLASS 4
FIRMFIT™ EARPLUGS
• Tapered shape for easy insertion
• Corded version helps to guard against
earplugs falling onto the floor
• Wall dispenser unit allows a refillable option
for the whole work area
LASERLITE® EARPLUGS
• Vibrant colours make protection visible
• Foam expands for a proper fit and comfort
• Contoured T-shape for easy use
• Soft with less expansion pressure for comfort
• Distinct warning orange colour makes
compliance checks easy
• Less pressure to roll down and slow
recovery rate aid in correct insertion
CODE 4
05378 Uncorded box of 200 pairs
405379 Corded box of 100 pairs
6188 Uncorded dispenser refill bag of 200 pairs
CODE 4
CODE 4
CLASS 5
ACCESSORY
LEIGHT SOURCE 400
EARPLUG
DISPENSER
• Bell shape delivers maximum in-ear comfort
• Contoured design easier to insert
• Easy to use plug dispenser
• Simply fill with any Howard Leight
refill bag
• Holds 400 pairs of Howard Leight
single use ear plugs
NOTE: Earplugs not included
CODE 405553 Pack of 5 pairs
CODE 402762 Dispenser
MAX1™ EARPLUGS
CLASS 3
CLASS 5
QB2HYG® EAR BANDS
AIRSOFT® EARPLUGS
• Patented band design prevents ear pods
from touching contaminated surfaces
• Soft pods rest partially in the ear for a
balance of protection and comfort
• Lightweight and portable
• New internal interlocking air pocket creates
a noise-blocking barrier
• Four flanges for a better seal in the ear canal
• A firm stem provides improved insertion
CODE 403641 Earband
CODE 4
03237 Uncorded
403236 Corded
CLASS 4
METAL DETECTABLE
FUSION® EARPLUGS
• F lexiFirm stem is easy to grasp, ensuring
easy insertion into ear canal
•H
ygienic materials, easy to clean
and re-use
•M
etal detectable cord and plug
•C
lass 4 SLC80 22dB
CODE 4
02306 Removable cord
402307 Corded metal detectable
HEARING PROTECTION
X-TREME® EARPLUGS
CLASS 4
CLASS 4
PROSAFE EARPLUGS
• Soft, highly visible foam earplugs
CODE 4
131
EARPLUGS
CORRECT FITTING
CLASS 4
CLASS 5
Only correctly fitted
earplugs provide the
required protection
MELLOWS® EARPLUGS
HEARING PROTECTION
• Extra-soft, extra-light foam for superior
all-day comfort
• Tapered shape for easy insertion and removal
• Shaped to fit even very small ear canals
• Non-irritating smooth surface
• Independently tested to AS/NZS 1270
ith clean hands, hold
nd forefinger as shown.
mpress the entire tapered
all wrinkle-free cylinder.
e fitting, reach hand over
pward and outward as
, tapered end of earplug
30-60 seconds until
then push in again for 5
1. ROLL & COMPRESS. With clean hands, hold
earplug between thumb and forefinger as shown.
Roll and progressively compress the entire tapered
end of the earplug to a small wrinkle-free cylinder.
CODE 4
07268 Uncorded box of 200 pair
407269 Corded box of 100 pair
407270 Plug Station 250 pair
3. CORRECT FIT. When properly inserted, the
bottom edge of earplug is located at the opening
of the ear canal.
2. INSERT PLUG. To ensure fitting, reach hand over
head and gently pull ear upward and outward as
shown. Insert compressed, tapered end of earplug
well inside ear canal. Hold 30-60 seconds until
earplug expands. Release, then push in again for 5
seconds to ensure fit.
4. INCORRECT FIT. A portion of the earplug not in
the ear canal will reduce effectiveness.
3. CORRECT FIT. When properly inserted, the
bottom edge of earplug is located at the opening
of the ear canal.
PURA-FIT® EARPLUGS
• Tapered for easier insertion
• Improved, softer foam for maximum comfort
• Hygienically packaged in biodegradable
paper pouches
• Non-irritating, smooth surface
• Class 5 SLC (80) 27dB
CODE 405374 Uncorded box of 200 pair
MELLOWS® PLUGSTATION
PURA-FIT® PLUGSTATION
• High visibility for increased awareness
• Clicking mechanism for easy use
and dispensing
• Each dispenser is sealed and disposable
plus completely recyclable
and dispensing
CODE 4
CODE 6
CLASS 4
CLASS 5
4. INCORRECT FIT. A portion of the earplug not in
the ear canal will reduce effectiveness.
PURA-FIT® CORDED
MELLOWS CORDED
®
• Earplugs are kept secure with
the cord
CODE 407269 Corded box of 100 pair
132
• Worlds first corded earplug dispenser.
• Workers take one pair at a time
CODE 4
410444 Corded PlugStation 150 pair
EARPLUGS
CLASS 4
CLASS 5
GLIDE® EARPLUGS
JETZ® EARPLUGS
SPARKPLUG®
• Extra-soft, low-pressure foam for comfort
• Tapered shape for easy insertion and removal
• Non-irritating smooth surface
• Class 5 SLC (80) 29dB
CLASS 5
• Extra-soft material and triple flange design
seals gently and snugly without pressure
• Cloth cord for a variety of working conditions
• Reusable
• 100% PVC-Free®
• Unique multi-curved stem rotates for a
custom fit
• Soft triple flange plug can be washed
and reused
• Cord can be attached at any
desired length
CODE 4
07266 Uncorded
407267 Corded
CODE 409994 Glide Trio Corded box of 50 pairs
CLASS 4
METAL DETECTABLE
CLASS 4
6415
6405
ROCKETS® EARPLUGS
SPARKPLUG® PLUGSTATION
and dispensing
CODE 6
644 Plug Station of 250 pair
6645 Plug Station of 500 pair
CLASS 5
• Ear plugs can be washed and reused
• Grip handle for easy insertion
• Air bubble in tip provides cushioned
comfort
• 6405 Pocket-Pak® carrying case provides
hygienic storage of plugs between uses
• Available in corded and
corded metal detectable
• 6405 Class 4 SLC(80) 24dB
• 6415 Class 4 SLC(80) 23dB
CODE 6405 Corded reusable earplug
6415 Corded reusable earplug metal detectable
CLASS 5
METAL DETECTABLE
SPARKPLUG®
METAL DETECTABLE EARPLUGS
• Worlds first corded earplug dispenser.
• Workers take one pair at a time
• Extra-soft, low-pressure foam for comfort
• Tapered shape for easy insertion
and removal
• Metal detectable cord and plugs
CODE 4
410442 Corded PlugStation 150 pair
CODE 4
410443 Corded Plug Station 150 pair
SPARKPLUG® CORDED
GLIDE® FOAM CORDED
• Unique multi-curved stem rotates for a
custom fit
• Foam tip or soft triple flange
•C
ord can be attached at any desired length
CODE 4
09992 Glide Foam Uncorded box of 100 pairs
409993 Glide Foam Corded box of 100 pairs
HEARING PROTECTION
CLASS 5
CLASS 3
JAZZ BAND® EAR BANDS
• Low band pressure
• Hangs easily down around the user’s neck
with optional breakaway neck cord
• A cooler and lighter alternative to earmuffs
• Includes an extra pair of pods
• Class 3 SLC(80) 18db
CODE 6
506 Jazz Band®
6504 Replacement tips (pk 5)
133
EARPLUGS
CLASS 5
CLASS 5
E-A-R™ CLASSIC™
SUPERFIT EARPLUGS
E-A-RSOFT™ YELLOW NEON EARPLUG
• Soft foam ensures a comfortable low
pressure seal
• Large size option for larger ear canals
• Bullet design provides high protection levels
HEARING PROTECTION
CODE 4
05590 Regular box of 200 pairs
405594 Large box of 200 pairs
• Bell shape allows easy fitting and removal
• Soft foam effectively seals ear canal
• Orange fitting ring to ensure the earplug is
fitted properly
• Foam softens when comes into contact
with natural body heat for a more
comfortable fit
E-A-RSOFT™ FX™ EARPLUGS
CLASS 5
CLASS 3
METAL DETECTABLE
ACCESSORY
E-A-R™ PUSH-INS™
WITH GRIP RINGS
E-A-R™ ONE TOUCH DISPENSER
CODE EARSOFTRB Dispenser refill 500 pair
EARDISP Dispenser base
CLASS 4
• Easy grip handle for quick insertion
and removal
• Shape moulds to ear canal for extra comfort
• Grip ring design “holds” plugs in place
CODE 4
CLASS 3
E-A-RSOFT™ YELLOW NEON CORDED
• The cord helps to keep the earplugs secure
• Large size option for larger ear canals
• Metal detectable option for the food industry
CODE 4
05591 Regular box of 200 pairs
405595 Large box of 200 pairs
405592 Metal Detectable box of 200 pairs
134
CLASS 4
E-A-R™ ULTRAFIT™ EARPLUGS
• T riple flange design provides comfortable fit
• Reusable
• Also available as metal detectable
CODE E
AR4002 Corded
302848 Corded metal detectable
CLASS 2
E-A-RFLEX™ EAR BAND
E-A-R™ EXPRESS™ PODS
• Easy grip handle
• Washable and reusable
CODE 4
• Comfortable, effective, lightweight
alternative to earmuffs
• Dermatological safe plugs are non-irritating
CODE E
PEARRF Ear band
404434 Replacement Tips box of 50 pairs

hearing pr o tection - NZ Safety Online Catalogue

Transcription

Similar documents

350239B SD505-6RB

to the Neon end-user brochure

Pantallas Acusticas Pared Verde (EN)

to the Xenon end-user brochure

Hearing Protection - Thermo Fisher Scientific

SoundWaves-September-2013 - Canadian Hard of Hearing

sh MiracleEar profile

Rob`s COLUMN - South East Hearing Care Centres

Widex Unique - McNeill Audiology

quietzone® noise control solutions