Inverted Horizontal Flow Wrapper Efficient packaging of hard to

Pack 301 IN
Inverted Horizontal Flow Wrapper
Efficient packaging of hard to handle products
Pack 301 IN
Products
be easily adjusted to accomodate
Due to its specialized handling, the
different product heights, which
Pack 301 IN is ideal for soft or sticky
decreases downtime during product
products, multipacks, and other
changeovers. From manual to auto-
products that are difficult to push
mated feeding, a full range of infeed
with the lugchain design found on
options is available, such as flight-
traditional upright flow wrappers.
bar, lug-less, and belt feeders.
Functional principle
Hygienic and open design
The film is fed from below the prod-
Removable covers and catch pans
uct level. Hard to handle products
below the finwheel assembly and
are securely carried on top of the
on the infeed give manufacturers
packaging film from the former
the benefit of easy cleaning. This
through the cutting head. This mini-
enhances production hygiene whilst
mizes jams and therefore enhances
maintaining high Overall Equipment
efficiency while ensuring a superior
Effectiveness (OEE).
package appearance.
High flexibility
The modular backstand can be located in various positions relative to the
infeed and the wrapper. This allows
to set up the machine according to
product specific requirements which
results in high efficiency and an optimized film path. The machine can
High uptime
The machine’s good accessibility
enables quick set-up, simplifies
troubleshooting and speeds changeovers. Fast changeovers are further
enhanced by the storage of all product settings in recipes.
Your benefits

Maximum
efficiency, flexibility, availability
Fast and easy
set-up, cleaning, changeovers
Proven
design, features, feeding technology
Reliable
construction, operation, product handling
1 Beckhoff controls
2 Vacuum conveyor
3 Air gusseting (optional)
1
2
System Structure
Buffering
3
Product Structure
Product Handling
Pick & Place
Distribution
Feeding
Horizontal Flow Wrapping
Primary Packaging
Multipack
Secondary Packaging
Toploading
Cartoning
Case Packing
Pack Series
Pack 201
Pack 401
Pack 301 LD
Pack 301 IN
Pack 301 ID
Standard Features
 Stainless steel product contact
parts
Single film reel holder
 Film break control
 Film register control
 Easily exchangeable former
 2 sets of finwheels built in seperate
hygienic housings
 Adjustable cantilevered finwheels
Options















Second film reel holder
Manual splice table
Low film detection
Automatic film splicer
Splice with knives
Coder mounting
Pre-heating unit
Mechanical or air gusseting
No product - no bag
No gap - no seal
Empty package air reject
Discharge rejects
High product detection
Power feed roll
Manufacturers splice detect
Specifications Pack 301 IN
Capacity
Film speed
Output
up to 60 m/min
up to 350 packages per minute
Film specifications
Max. reel diameter
Max. reel weight
Max. film width
400 mm
35 kg
650 mm
Package specifications
Width Max. height
12 – 250 mm
110 mm
Electrical data
Standard power supply
Power supply frequency
Control circuit
3N 400 VAC
50 Hz or 60 Hz
24 VDC
Pneumatics
Pneumatics
min. 6 bar
ColorRAL 9006, FDA approved
Working height
930 mm
Footprint (mm) - example
... other options on request
Bosch Packaging Technology B.V.
Conradstraat 4
3125 BC Schiedam
Netherlands
Phone +31 (0)10 4885 899
Fax +31 (0)10 4377 628
[email protected]
www.boschpackaging.com
Subject to alterations