Linked - ScienceKNOW Conferences

Transcription

Paris, 15-17 July 2015
General Scientific Program
Welcoming Message
Dear Colleagues,
The International Conferente Sustainable Materials Science and Technology (SMST),
is organized by professors and researchers belonging to different scientific areas of
the C3i/Polytechnic Institute of Portalegre (Portugal) and the Extremadura University
(Spain) and has the objective of creating an international forum of academics,
researchers and scientists to discuss worldwide results and proposals regarding to
the most sound issues related to MATERIALS. It will be held in Paris from 15 to 17
July 2015.
This Event will include the participation of renowned keynote speakers, oral
presentations, posters sessions and technical conferences related to its subjects and
touristic and cultural events and visits.
The whole content of the presented papers and conferences will be published in the
Proceedings e-book. Those communications considered of having enough quality can
be submitted for publication in International Journals. Those works which can not be
published in any of the congress journals, will be published in a special book of the
International Conference on Sustainable Materials Science and Technology, after the
congress has finished.
The Congress will also have a space for companies and/or institutions to present
their products, services, innovations and research results. If you or your company are
interested in participating of this exhibition, please contact the Technical Secretary.
Finally, on behalf of the Organizing Committee, I would like to invite all the Scientific
Community to participate in this project, presenting papers or communications
related to any of the proposed areas.
Welcome to Paris!
Antonio Macías García Ph.D.
President of the Organizing Committee
Department of Mechanical Engineering,
Energy and Materials
University of Extremadura, Spain
E-mail: [email protected]
2
Organizing Committee
President
Antonio Macías García PhD.
Department of Mechanical Engineering, Energy and Materials
Extremadura University, Spain
[email protected]
Vice-President
Paulo Sérgio Duque de Brito PhD.
Technologies and Design Department
C3i/Polytechnic Institute of Portalegre, Portugal
[email protected]
Coordinator
Eduardo Cuerda Correa PhD.
Department of Organic and Inorganic Chemistry
[email protected]
Coordinator
Joaquín R. Domínguez Vargas PhD.
Department of Chemical Engineering and Chemical Physics
[email protected]
Coordinator
Anabela Sousa Oliveira PhD.
C3i/Polytechnic Institute of Portalegre, Portugal
[email protected]
3
Vocal
Antonio Nadal Gisbert PhD.
Mechanical Engineering and Materials Department
Polytechnic University of Valencia, Spain
[email protected]
Vocal
Raviraj M. Kulkarni PhD.
Department of Chemistry,
Gogte Institute of Technology, Udyambag, Belgaum, Karnataka, India
[email protected]
Vocal
Vahid Jabbari, Mr.
Chemistry Department
The University of Texas at El Paso (UTEP), USA
[email protected]
Technical Secretary
Mónica Martins
SciKNOW Conferences
Scientific and Knowledge Conferences
+34 695 961 908
[email protected]
4
Scientific committee
Awf Al-Kassir, PhD.
Mechanical, Energetic and Materials Engineering Department
University of Extremadura
Spain
Cuerda Correa, Eduardo PhD.
Department of Organic and Inorganic Chemistry
Extremadura University
Spain
Domínguez Vargas, Joaquín R. PhD.
Department of Chemical Engineering and Chemical Physics),
Spain
Do Couto Jacob, Silvana PhD.
Human Study Center for Worker's Health and Human Ecology
National School of Public Health, Oswaldo Cruz Foundation
Brazil
Duque de Brito, Paulo PhD
C3i/Polytechnic Institute of Portalegre
Portugal
González Montero, T. PhD.
Chemical Engineering Department
Spain
Macías García, Antonio PhD.
Department of Mechanical Engineering, Energy and Materials
Spain
Márquez Moreno, María del Carmen PhD.
Department of Chemical and Textile Engineering
University of Salamanca
Spain
Moreira, Josino PhD.
Human Study Center for Worker's Health and Human Ecology
National School of Public Health, Oswaldo Cruz Foundation
Brazil
5
Nadal Gisbert, Antonio PhD.
Mechanical Engineering and Materials Department
Polytechnic University of Valencia
Spain
Pranshoo Solanki, PhD.
Department of Technology
Illinois State University
USA
Raviraj M. Kulkarni, PhD.
Department of Chemistry
Gogte Institute of Technology, Udyambag, Belgaum, Karnataka
India
Sousa Oliveira, Anabela PhD.
Portugal
Rodrigues, Luiz PhD.
Portugal
Sousa da Silva, Luís PhD.
ISEP - School of Engineering
Polytechnic Institute of Porto
Portugal
Vahid Jabbari, PhD.
Chemistry Department
The University of Texas at El Paso (UTEP)
USA
Vieira Ferreira, Luís PhD.
Lisbon Technical University
Portugal
6
GENERAL SCIENTIFIC PROGRAM
Oral communications (10 minutes for presentation + 5 minutes for questions)
Wednesday, 15th July 2015
Schedule
Main room
Room 1
Room 2
8h30
Documentation delivery
-
-
9h30
Opening session
-
-
-
-
Plenary talk
9h45
10h30 – 11h30
Identification of synthetic polymers and
biopolymers by analytical pyrolysis – gas
chromatography/mass spectrometry (PyGC/MS),
by PhD. Peter Kusch, University of
Applied Sciences, Germany
ORAL COMMUNICATIONS (ENGLISH)
Materials in Research
Materials in Industry
Characterization of effloresences of
ambient and elevated temperature cured
fly ash based geopolymer type concretes,
J.Temuujin, C.H.Ruescher, A.Minjigmaa,
B.Darkhijav, B.Davaabal, B.Battsetseg,
Mongolian Academy of Sciences,
Mongolia
Analysis of air permeability and water
vapour transmission rating of highly
impermeable novel rubber
nanocomposites, S.Kumar,
S.Chattopadhyay, A.Sreejesh, Sujith Nair,
G.Unnikrishnan, Golok B.Nando, Indian
Institute Of Technology, India
Development of Poly(vinylidene
difluoride)–Modified Clay
Nanocomposites for Capacitor Thin Films,
Comparison of the experimental and
calculated data of the formation process
of beryllia ceramics, U. Zhapbasbayev, G.
Sustainable Materials
Synthesis and Characterization of Corn
(Zea mays L.) oil-based Polyurethane Film,
F. Fajardo, J. Dela Peña, J. Bayani, E.
Magdaluyo Jr., University of the
Philippines Diliman, Philippines
Morphological control for organometal
halide perovskite solar cells using vaporassisted solution process, Jing Liu,
Minqiang Wang, Zhi Yang, Jin Huang, Le
7
N. Bunnak, P. Laorattanakul, A. S. Bhalla,
H. Manuspiya, Chulalongkorn University,
Thailand
Ramazanova, Z. Sattinova, S. Shakhov,
L.N. Gumilyev Eurasian National
University, Russia
Sol-Gel Prepared and Spin Coated TiO2
Thin Films for DSSC: Optical and
Structural Properties, Syed Sajjad
Hussain, Farman Ullah Khan, Saira Riaz,
Shahzad Naseem, University of the
Punjab, Pakistan
Embrittlement of materials during fatigue
growth of short macrocracks, V.M.
Kornev, Lavrentyev Institute of
Hydrodynamics, Russia
Structure dependent multi-photon
harvesting in Zn(II) terpyridine
copolymers, Y. Gao, T. He, A. C.
Grimsdale, Nanyang Technological
University, Singapore
Li, Xi’an Jiaotong University, China
Recycled HDPE used as wastewater pipes:
mechanical properties and moleculer
structure, M. Alzerreca, M. Paris, O.
Boyron, D. Orditz, G. Louarn, O. Correc,
Scientific and Technic Center of Nantes,
Frances
Some Ways to Improve the Toughness in
High Strength Steels: Grade 38MnV7, S.F.
Medina, M. Gomez, J. Calvo, J.M.
Cabrera, CENIM-CSIC, Spain
Coffee-break
Coffee-break
Coffee-break
POSTERS SESSION
POSTERS SESSION
Materials in research
Process and Product Manufacturing
Synthesis of cobalt ferrite nanoparticles
via novel EDTA/EG based precursor solgel method and their structural and
magnetic properties as an environment
Effects of NaOH Concentration on Phase
Purity and CO2 Adsorption Capacity of
Ca(OH)2, Nwe Ni Hlaing, Srimala
Sreekantan, Hirofumi Hinode, Aye Aye
Utilizing Laser Cutting, 3D Printing and 3D
Scanning to Create an Affordable Fully
Interactive Prototype of Full Size
Animatronic Figure, Christopher W.
POSTERS SESSION
11h30-12h15
12h15 – 13h30
8
friendly route, H. Shokrollahi, Shiraz
University of Technology, Iran
Mechanical properties of epoxy/fumed
silica nanocomposites, Kh. Maghsoudi, S.
Motahari, University of Tehran, Iran
Sol-Gel Prepared and Spin Coated TiO2
Thin Films for DSSC: Optical and
Structural Properties, Syed Sajjad
Hussain, Farman Ullah Khan, Saira Riaz,
Shahzad Naseem, University of the
Punjab, Pakistan
Study of friction surface Fe-Mn-C-B-Si-NiCr coatings, M. Pashechko, K. Dziedzic, E.
Mendyk, Lublin University of Technology,
Poland
Nanographene-based Saturable
Absorbers for Harmonic Mode-Locked
Fiber Lasers, Shuo-Fu Hong, Hsin-Hui
Kuo, Yi-Cheng Liao, National University of
Kaohsiung, Taiwan
Thant, Universiti Sains Malaysia, Malaysia
Preparation of Lignin-based PF (LPF)
Resoles with De-polymerized Kraft Lignin
for Wood Adhesives, Homaira Siddiqui,
Shanghuan Feng, Nubla Mahmood,
Shuna Cheng, Zhongshun Yuan, Amin
Rizkalla, Ajay Ray, Chunbao Xu,
University of Western Ontario, Canada
Hydrotalcites prepared with different
coprecipitant agents and a hazardous
aluminium waste. Effects on porosity, R.
Galindo, I. Padilla, R. Sánchez-Hernández,
A. López-Delgado, M. Yates, National
Center for Metallurgical Research, CSIC,
Spain
LaMorte, Haowei Wang, California State
University, USA
Compromising quality factors can lead to
the demise of a manufacturing company,
P. Kholopane, University of
Johannesburg, South Africa
Studies on Electron Beam Welding of CrMn Stainless Steel, J. Dutta Majumdar, K.
Pradhan, I. Manna, Indian Institute of
Technology Kharagpur, India
Application of Cold Spraying in
Development of Nickel Based Metal
Matrix Composites, T. Chandanayaka, F.
Azarmi, A. Tangpong, North Dakota State
University, USA
Reutilization Incinerator Fly Ash using
Attrition Scrubbing and Geopolymeric
Technology, W.H. Lee, T.W. Cheng, L.
Gautron, K. Krausova, National Taipei
University of Technology, Taiwan
Al-waste zeolites and their application as
cadmium adsorbents, R. SánchezHernández, I. Padilla, E. WinterJúnior,
A.L.R. Mercê, S. López-Andrés,D.A.
Fungaro,R. Galindo,A. López-Delgado,
National Center for Metallurgical
Research, CSIC, Spain
13h30
LUNCH
LUNCH
LUNCH
9
10
Thursday, 16th July 2015
Schedule
Main room
Room 1
Room 2
-
-
Structure of Materials
Materials in industry
Influence of surface layer of hydrated
silicon on the stabilization of Co2+ cations
in Zr-Si fiberglass materials, T. Larina, T.
Glazneva, L. Dovlitova, V. Kaichev, E.
Paukshtis, B. Bal’zhinimaev, Boreskov
Institute of Catalysis, Russia
Guayule Natural Rubber –a sustainable
material for the Rubber Industry in the
21st Century, Golok B.Nando, Indian
Institute Of Technology, India
Plenary talk
9h00
Remediation of eutrophic coastal marine
sediments using granulated coal ash, a
by-product from coal electric power
plants, S. Asaoka, H. Okamura, K.
Nakamoto, K. Hino, Kobe University,
Japan
09h45 – 11h00
Study of chromatic anomalies of granite
through their physical and mechanical
properties, I. Valverde-Palacios, I.
Valverde-Espinosa, M. Martín-Morales,
R. Fuentes García, University of Granada,
Spain
A new biomaterial constructed with
natural polymers associated to anticancer
drugs entrapped in metal nanoparticles,
C. N. Lunardi, W.M.Pinheiro, M.I.Silva,
A.J.Gomes, University of Brasília, Brazil
Effect of magnesium oxide on CaO based
sorbent for CO2 capture, Vignesh
Kumaravel, Farah Diana Binti Mohd
Daud, Srimala Sreekantan, University
Nano/microstructure and
nanomechanical characteristics of some
calcium silicate hydrates / polymers
composites, F. Pelisser, P. J. P. Gleize, A.
Mikowski, Federal University of Santa
Catarina (UFSC), Brazil
Surface Studies of La doped Bismuth Iron
Oxide Nano-particles by Scanning Kelvin
Probe System, Hadia Noor, M. Tahir, S.
Riaz, S. Naseem, University of the
The Low Internal Resistance
Nanocomposite Electrodes for HighPerformance Supercapacitors, M.W.
Wang, W.T. Hsieh, Oriental Institute of
Technology, Taiwan
Synthesis and postfunctionalization of
polyetherethersulfone-allyl copolymers
for applications in membrane filtration,
Adrien Faye, Josée Brisson, University
Laval, Canada
The Interrelated Effects of Cast Grain
11
Sains Malaysia, Malaysia
Punjab, Pakistan
The effect of modification of 0,5% Ti on
the type of crystallization and selected
mechanical properties of High Chromium
Cast Iron, D. Siekaniec, D. Kopyciński,
AGH University of Science and
Technology, Poland
Ultrasonic impact treatment of fine-and
coarse grain commercial purity titanium,
R. Hairullin, A. Kozelskaya, A. Panin, M.
Kazachenok, National Research Tomsk
Polytechnic University, Russia
Structure and Intermetallic Distribution
on Fatigue of Al-Cu-Li Alloys, R. Whelchel,
M. Revil-Baudard, F. Mas, P. Jarry, J.-C.
Ehrström, Constellium Technology
Center, France
Comparative study on intermetallic
compounds at the interface between Pbfree solder and Ni/Pd/Au layer, A.
Srisrual, KMUTNB, Thailand
Studies on Characteristics of Titanium
Cenosphere Composite by Powder
Metallurgy Route, D. Dutta Majumdar, D.
P. Mondal, A. Roy Chowdhury, S.
Chauhan, A. K. Jha, J. Dutta Majumdar,
Indian Institute of Technology Kharagpur,
India
Mechanical Properties of Self-binding
Board Made of Pre-treated and Steamexploded Hemp (Cannabis Sativa L.)
Shives, R. Tupciauskas, M. Andzs, J.
Rizhikovs, M. Puke, A. Paze, P.
Brazdausks, K. Meile, N. Vedernikovs,
Latvian State Institute of Wood
Chemistry, Latvia
Coffee-break
Coffee-break
Coffee-break
POSTERS SESSION
POSTERS SESSION
POSTERS SESSION
Water-based method for fabrication of
nanocomposites by covalent bonding
between noble metal nanoparticles and
polymers, T. Andryszewski, M. Iwan, M.
Fialkowski, Polish Academy of Sciences,
Poland
Mechanical Properties of Air Plasma
Sprayed of Partially Stabilized Zirconia
Enhanced With Tungsten Carbide, M.
Salimi Jazi, S. Abuali Galedari, F. Azarmi,
A. Tangpong, Y. Huang, Z. Lin, North
Dakota State University, USA
Materials in research / Process and
Product Manufacturing
The improvement of n-type (Bi2Te3)1-
Wear Behavior of Ni and Ni-Cr enhanced
11h00-11h45
11h45 – 12h45
X-ray Spectra Study of Surface
Recombination in Quantum DotsSensitized Solar Cells and Their Reduction,
Zhenhua Chen, Hui Li, Yong Wang,
Renzhong Tai, Chinese Academy of
Sciences, China
12
x(Bi2Se3)x (0.2≤x≤0.4) alloys'
thermoelectric properties by increasing
the orientation and optimizing the
manufacturing process, Omer Meroz,
Ofer Beeri, Yaniv Gelbstein, Ben-Gurion
University of the Negev, Israel
An Approach Model To Study Ultra-low
Resistance Source/DrainContacts Scheme
for III–V NMOS, A. Mohamed, D. Nagy,
M. A. Elmessary, K. Kalna, Swansea
University, United Kingdom
Electroless copper deposition using
environmentally-friendly natural polyols
as Cu(II) ligands, E. Norkus, J.
Jačiauskienė, K. Prušinskas, I.
Stalnionienė, L. TamašauskaitėTamašiūnaitė, Dordi Yezdi, Aniruddha Joi,
Center for Physical Sciences and
Technology, Lithuania
13h00
17h-19h
LUNCH
AC8A Composites by Low Pressure
Infiltration Process, Kelimu Tulugan,
HanKi Yoon, WonJo Park, GyeongSang
National University, Korea
Preparation of
hydroxyapatite/chitosan/silk fibroin
composites, A. Sionkowska, B.
Kaczmarek, M. Michalska, P. Trokowska,
Nicolaus Copernicus University, Poland
Shaped Fe2O3-Pd Magnetic Composites
as Dual Modal Contrast Agents for
Targeted CT/PAT Molecular Imaging,
Anamaria Orza, Emory University School
of Medicine, USA
An Experimental Investigation of NonTraditional Welding Methods for
Aluminum Alloys, Kaan Ozel, Cem
Cetinarslan, Trakya University, Turkey
Structural properties of substituted
gallium ferrites, Daniela Maria Neacsa,
Gisèle Gruener, Emmanuel Veron, JeanClaude Soret, University François
Rabelais, France
LUNCH
LUNCH
TOURISTIC VISIT
13
Friday, 17th July 2015
Schedule
Main room
Room 1
Room 2
-
-
Risk Assessment of Reactor Containment
Building Construction in Nuclear Power
Plant, Dae-Woong Shin, Ginam Yang,
Yoonseok Shin, Kyonggi University,
Republic of Korea
Fabrication of Large Area Acoustic
Metamaterials utilized by microstructured resonators, Sung Ho Lee, Ji
Hoon Lee, Jeong Hyeon Lee, Hoon Eui
Jeong, Jun-Ho Choi, Moon Kyu Kwak,
Kyungpook National University, South
Korea
Mechanical behaviour of PLA/clay
reinforced nanocomposite material using
FE simulations: Comparison of an
idealized volume against the real electron
tomography volumen, P. Jimbert, M.
Iturrondobeitia, R. Fernandez-Martinez,
T. Guraya, UPV/EHU, Spain
Digital Pen-Based Interaction Techniques
for Estimating Labor Productivity on a
Construction Project, Sangyong Kim,
Gwang-Hee Kim, Dae-Won Kim, Hyo-Min
Song, Kyonggi University, Republic of
Korea
Punching Shear Strength of Reinforced
Concrete Flat Plates with Steel Plate
Shear Reinforcement, E. Jo, M. S. Kim, H.
Kim, Y. H. Lee, Kyung Hee University,
Korea
Plenary talk
9h00
09h45 – 11h00
Low Density Polylactide-Polyolefin
Composites Generated Through Sold
State Orientation, N. Scholl, V.
Topolkaraev, R. McEneany, R. McEneany,
Kimberly-Clark Corporation, USA
Graphene doped CoFe2O4
nanocomposites for degrading dye in
waste water, Lu Gan, Songmin Shang,
Chun wah Marcus Yuen, Shou-xiang
Jiang, The Hong Kong Polytechnic
University, Hong Kong
Comparative tribocorrosion resistance in
physiological solution
of untreated and modified Ti-6Al-4V alloy
surface by electrodeposition of
hydroxyapatite coatings into nanoporous
titania layers, E. Danaila ,L. Benea,
Electrochemical Synthesis of Catalytic and
Protective Coatings on Molybdenum
Substrate for Application in Catalysis, A.
Dubrovskiy, S. Kuznetsov, Kola Science
Wettability of Two-Level Structured Metal
Surfaces, Hie Chan Kang, Kunsan National
University, South Korea
Numerical Analysis of the Composite RCC-
14
University of Galati, Romania
Centre RAS, Russia
HMA Pavement Structures, Sepehr
Ghafari, Navrood Construction Company,
Iran
Effect of magnesium oxide on CaO based
sorbent for CO2 capture, Vignesh
Kumaravel ,Farah Diana Binti Mohd Daud
,Srimala Sreekantan, University Sains
Malaysia, Malaysia
Oxidation of double-glow plasma
NiCoCrAlY coating on γ-TiAl based alloy,
X.H. Chen, P.Z. Zhang, D.B. Wei, X.F. Wei,
Nanjing University of Aeronautics and
Astronautics, China
Piezoelectric and Ultrasonic Investigation
of Layered Ferroelectric Crystals of
CuInP2P6 Family, V. Samulionis, J. Banys,
Yu. Vysochanskii, Vilnius University,
Lithuania
Creation of the Composite Material
Nitinol-Tantalum Coating for Medical
Application, E. Marenkova, S. Kuznetsov,
Kola Science Centre RAS, Russia
Coffee-break
Coffee-break
Coffee-break
POSTERS SESSION
POSTERS SESSION
POSTERS SESSION
Structure of materials
Altering the microstructure of pearlitic
steel using pulsed electric current, B.
Elliott-Bowman ,A.C. Cook ,P. Brown,D.
Dye,R.S. Qin, Imperial College London,
United Kingdom
Characterization and corrosion-resistance
performance of hybrid Co/UHMWPE
composite biocoatings, L. Benea ,E.
Danaila ,I. Bounegru, University of Galati,
Romania
The growth of protective coating during
low- and high-temperature hot dip
galvanizing, D. Kopyciński ,A. Szczęsny,E.
Guzik, University of Science and
Technology, Poland
Influence of salt quantity on recovery
yield of heterogeneous aluminum scrap,
S. Capuzzi, G. Timelli, L. Capra, L.
Romano, University of Padua , Italy
Strength of multi-bolted single-lap joints
with carbon-fibers and glass-fibers
reinforced epoxy composites, R. Boukhili,
F. Gamdani, A.Vadean, Polytechnique
Montreal, Canada
11h00-11h45
11h45 – 12h45
15
Quantum chemical studies Glycine max
oil as green corrosion inhibitor for mild
steel in acidic medium, Jeetendra
Bhawsar,P.K. Jain,Preeti Jain,
Government Holkar Science College,
India
Preparation and Characterization of
Nickel Oxy-hydroxide Electrodes to Urea
Alkaline electrolyzers for the Hydrogen
Production, Paulo Duarte, Luiz Rodrigues,
Paulo Brito, Polytechnic Institute of
Portalegre, Portugal
13h00-15h00
Role of Enrichment in ZnTe Thin Films for
Solar Cell Applications, Nazar Abbas Shah,
COMSATS Institute of Information,
Pakistan
Investigation of the influence of polyvinyl
alcohol and its derivative polyvinyl butyral
on the electrophysical properties of
compacted protonated potassium, E.
Orozaliev,S. Shevtsov, Yuri Gagarin State
Technical University of Saratov, Russia
CLOSING COCKTAIL
16
Poster sessions
WEDNESDAY, 15TH JULY 2015
Materials in Research
Raheb Ibtissem,M.Y.Debili
STRUCTURAL EVOLUTION OF COLD COMPACTED Al-Co ALLOY SYSTEM
University Badji-Mokhtar-Annaba, Algeria
Jang-Ung Park
Stretchable, Transparent Electrodes For Wearable Electronics,
Ulsan National Institute of Science and Technology (UNIST), Republic of Korea
N. Boukabcha ,Y.Megrouss,R. Rahmani,N. Benhalima,A. Chouaih ,F. Hamzaou
Study of the electrostatic properties of an organic compound 4-methyl-N-[(5- nitrothiophen-2ylmethylidene)] aniline
University Abdelhamid Ibn Badis de Mostaganem, Algerie
A.Khedim,A. Feddag,A.Bengueddach
REMOVAL OF POLUTANTS BY SYNTHETIC ZEOLITE
University of Mostaganem, Algeria
J. Li ,A. Peng ,M. Chen,Q. Shen,L. Zhang
Preparation of Y2O3 dispersed Ni-based alloy by liquid phase in-situ oxidation,
Wuhan University of Technology, China
Liqiang Zhang,Zhenfei Gao,Yongfeng Li
Using graphene for sensing an inhomogeneous strain due to the surface relief in FeNiCoTi shape
memory alloy
China University of Petroleum-Beijing, China
S-d Nie,C-y Liu,Z-y Zhang
Surfactant-free Controllable Synthesis of Ag Hierarchical Microcrystals and application in catalysis,
Chinese Academy of Sciences, China
Aline Simo,Bonex Mwakikunga ,Malik Maaza
Vanadium Dioxide Nanostructures: One Dimension Hydrogen Sensors Room Temperature
iThemba LABS-National Research7129, South Africa
L.Telmenbayar,J.Temuujin
Thermal reactions of mechanically milled wolframite and thermal coal mixtures
Mongolian Academy of Sciences, Mongolia
Thiago Ramos Stellin Malagrino ,Mauro Cesar Terence
Characterization of Polycarbonate/natural sodium clay and Polycarbonate/organofilic clay
nanocomposites
Mackenzie Presbyterian University, Brazil
17
T Choi,S. Chin
Extracting Optical Parameters of Transmittance for Translucent Material Rendering,Sungkyul
University
Republic of Korea
A.Hafidh,T. Hellali,F. Touati
Synthesis and Characterization of New Silica-Based
Mesoporous Hybrid Materials via Sol-Gel route
IPEIT, Tunisia
A.Hafidh,T.Hellali,N. Etteyeb,F.Touati
Synthesis of new hybrid gels obtained by the reaction of PMHS
with di-functional heterocyclic molecules
S. Changotade ,G. Radu Bostan ,A. Consalus ,J. Peltzer,J.-J. Lataillade,D. Lutomski
Investigation of Stem Cell Interactions with Cross-Linked Poly(ε-Caprolactone Urethane) Scaffolds: A
Preliminary In Vitro Study
University Paris 13, France
J. Adamiec
The properties of nickel alloys within the brittle temperature range (BTR),
Silesian University of Technology, Poland
D. Stojanović ,J.Trajić ,R. Kostić ,N. Romčević,M. Romčević ,M. Mitrić ,P. Balaž
Raman spectroscopy of ZnS quantum dots obtained by mechanochemical synthesis
University of Belgrade, Serbia
N. Kheloufi,A. Bouzid
Ground state and quasiparticle band structure from
ab initio calculations of CdS and CdTe binary alloys
University of Bordj Bou Arréridj, Algeria
L. David,B. Moldovan,L. Olenic,A. Vulcu,A. G. Filip
New Biomaterials Based on Gold Nanoparticles and Evaluation of Their Anti-Inflammatory Properties
”Babeş-Bolyai” University, Romania
J. Díaz-Reyes ,J. I. Contreras-Racón ,J. E. Flores-Mena ,J. M. Gutiérrez-Arias ,M. M. Morín-Castillo
Growth and characterization of chemical-bath deposition CdxPbl-xS,CIBA
National Polytechnic Institute, Mexico
J. Díaz-Reyes ,J. I. Contreras-Racón ,J. E. Flores-Mena ,J. M. Gutiérrez-Arias ,M. M. Morín-Castillo
Characterization of CBD-CdSe1-ySy deposited at low-temperature for photovoltaic applications
S.S. Hussain,Muhammad Imran,R. Ashraf,S. Riaz,S. Naseem
Variations in Structural and Magnetic Properties of Sol-Gel deposited Hematite – Dependence on
Annealing Conditions
Huimin Sun,Yang Wang,Zhaozhan Gu,Minxue Zhang,Le Chen
Study on the Preparation and Properties of β-Sialon Ceramics Coatings
Nanjing University, China
Le Chen ,Chunhua Lu ,Huimin Sun ,Zhaozhan Gu ,Mingxue Zhang
Variable Emittance of Composites in the CeO2 Doped Sm0.5Sr0.5CoO3 System
Nanjing University, China
18
J. Muniz Rocha ,T. Morimoto Nobre ,L. Caseli
Modified carrageenan as mediator in the adsorption of enzymes in nanostructured films
Federal University of São Paulo, Brazil
B. Moldovan,L. David,L. Olenic,A. Vulcu,A. G. Filip
Antioxidant Effect of New Green Synthesized Gold Nanoparticles using Polyphenols from European
Black Elderberry
Babeş-Bolyai” University, Romania
Issam DJABRI,Nasreddine DERRADJI,Rafik BELGHIT,AbdelkaderKARA
The structural, electronic and magnetic properties of Silicene nanoribbons (zigzag and armchair) Clterminated
University of Badji, Algeria
L. Benea,E. Dănăilă,V. M. Dumitraşcu
Vegetable extracts as inhibitors of carbon steel corrosion in acidic environment
V. Koleva, M. Najdoski, S. Stojkovikj
Effect of the structure on the electrochromic properties of nano-sized vanadium(V) oxide thin Films
Bulgarian Academy of Sciences, Bulgaria
I. Spassova, N. Stoeva, R. Nickolov, V. Koleva, M. Najdoski, M. Khristova
Mesoporous silica-carbon composites and their application as sorbents for dynamic CO2 capture
Bulgarian Academy of Sciences, Bulgaria
Libin Jin, Ju Gao
Structural and Electrical Properties in Bilayer Films of SrTiO3-δ/La0.9Hf0.1MnO3
University of Hong Kong, China
D. Kopyciński, D. Siekaniec
Formation of the hardened composite layers in the High Chromium Cast Iron castings
AGH University of Science and Technology, Poland
V. Duhki, A. Bissessur, B. S. Martincigh
Unique antioxidant and sulfur corrosion retardant properties of transformer oil blended with
turmerone extract
University of KwaZulu-Natal, South Africa
M. Langner, A. Greiner
Ultralight, Superhydrophobic and high Conductive metalized Polymer 3D fibrous Sponges by wet
chemical Metal Deposition
University of Bayreuth, Germany
W.L. Wang, H.B. Gu
Zircon-type Tetragonal CeVO4-graphene Composites with Superior Lithium Storage Properties
Chonnam National University, Korea
Van Hiep Nguyen, Hal-Bon Gu
Effect of reduced graphene oxide on the electrochemical performance of lithium vanadium phosphate
in lithium ion batteries
Chonnam National University, South Korea
Anahita Alizadeh Otaghvar, Mahshid Nikpour Nezhati, Habibollah Baharvand
Application of Modified Magnetic Polymer Particles with a Cation Exchange Resins
Islamic Azad University Central Tehran Branch, Iran
19
Tae Jin Kang, Seon Ah Jeong
Superhydrophobic and Anti-Soiling Surfaces Coated with Silica Nanoparticles for Hierarchial Roughness
Seoul National University, Korea
S. Motahari ,Kh. Maghsoudi ,N. Eskandari,M. Kazemi
Improvement of Compression Strength of Silica Aerogel Using PEG
University of Tehran, Iran
A. Barroso-Bogeat,M. Alexandre-Franco,C. Fernández-González,A. Macías-García ,V. Gómez-Serrano
Electrical conductivity of activated carbon-metal (hydr)oxide nanocomposites under compression. A
comparison study
A. Barroso-Bogeat,M. Alexandre-Franco,C. Fernández-González,A. Macías-García ,V. Gómez-Serrano
Preparation of activated carbon-SnO2, TiO2 and WO3 catalysts. Study by FT-IR spectroscopy
A. Barroso-Bogeat,B. Lobato-Ortega,T.A. Centeno,M. Alexandre-Franco,C. Fernández-González,V. GómezSerrano
Preparation of activated carbon-semiconductor metal (hydr)oxides. Characterization by immersion
calorimetry
Thursday, 16th July 2015
Oti, J.E.,Kinuthia, J.M. ,Robinson R.B.
THE USE OF PALM KERNEL SHELL AND ASH FOR CONCRETE PRODUCTION
University of South Wales, United Kingdom
Oti, J.E.,Kinuthia, J.M.,Robinson R.B.
Engineering Properties of Concrete made with Waste Glass, PFA and GGBS
University of South Wales, United Kingdom
Gilberto João Pavani ,Sérgio Adalbeto Pavani ,Carlos Arthur Ferreira
Carbon Fiber Recycling of Carbon fiber reinforced Polymeric Reservoirs forCompressed Natural Gas
Rio Grande do Sul Federal Institute, Brazil
S.M. Martelli,T.Y.K. Nogueira,A.D. Pereira,F. M. Fakhouri
Effect of gelatin coatings containing cellulose nanocrystals in the postharvest quality of fresh
strawberry
Federal University of Grande Dourados, Brazil
R. Brencis ,R. Tupciauskas ,M. Andzs ,J. Rizhikovs ,M. Puke ,A. Paze ,P. Brazdausks, K. Meile ,N.
Vedernikovs
Sound absorbtion of Self-binding Panel Made of Pre-treated and Steam-exploded Hemp (Cannabis
Sativa L.) Shives
Latvia University of Agriculture, Latvia
20
Donald. K. L. Chan,Jimmy. C. Yu
Mesoporous Bi2O3/TiO2 for
Photocatalytic Carbon Dioxide Conversion,
The Chinese University of Hong Kong, China
R. Segura ,I. Velazquez ,V. GONZALEZ
Free phthalate Plasticizer DOTP (Dioctylterephthalate) from chemical recycling of waste PET,
Chemical Industrial Group, Mexico
G.F. Nogueira,F. M. Fakhouri,C. R. F. Grosso
Production of microparticles with multilayer obtained by ionic gelation associated electrostatic
interaction
State University of Campinas, Brazil
C. W. P. Carvalho, C. S. Andrade, V. S. Silva, S. M. Martelli, F. M. Fakhouri
Potential of Pupunha palm fibers to be used as reinforcement in composites
State University of Campinas, Brazil
Caroline Valadão Pacheco,Nilson Casimiro Pereira,Mauro Cesar Terence,Cristiane Doria Kalupigian,Carla
Gouvêa Wiezel,Bruno Rosenthal
OBTAINING ELASTOMERIC BLANKET BASED ON STYRENE-BUTADIENE RUBBER USING WASTE TIRE IN A
BUILDING APPLICATION
Mackenzie Presbyterian University
Wen-Jen Liu ,Shi-Heng Lin
Study of Dye Sensitized Solar Cell Application of TiO2 Films by Atmospheric Pressure Plasma Jet
Deposition System
I-Shou University, Taiwan
D.K. Becerra Paniagua,J. P. Enríquez,G. I. Duharte,J. M. Acosta,P. J. Sebastian
REMOVAL OF MERCURY, LEAD AND CADMIUM IN AQUEOUS SOLUTION BY NATURAL AND MODIFIED
ZEOLITES
University of Sciences and Arts from Chiapas, México
A. J. Gomes ,V. R. Souza,A. S. W. Rodrigues,C. N. Lunardi
Degradation of anticancer drugs entrapped in polymeric nanoparticles using supercritical wáter
University of Brasília, Brazil
L. Benea ,E. Danaila,Iulian Bounegru
Electrochemical behavior of cobalt - chromium alloy as biomaterial in different pH environments,
Jee-Sang Kim ,TaeHong Kim
An Experimental Damage Estimation of Geopolymer Concrete Using Ultrasonic Pulse Velocity Method
Seokyeong University, Republic of Korea
Jee-Sang Kim , JongHo Park
Bond Properties of Reinforcements embedded in UHPC for Various Compressive Strength Sevels
Seokyeong University, Republic of Korea
T. Esquerdo-Lloret, A. Nadal-Gisbert, J. Carbajo, J. Ramis
Acoustic characterization of cement matrix composites with lightweight aggregates
21
M. Palacios, L. Núñez, M. Pujadas, S. Suárez, B. Sánchez, M. B. Gómez-Mancebo, J. Fernández-Pampillón,
A. Mazario, A. Moral, J. Pérez
Durability of a photocatalytic coating on a bituminous pavement
CIEMAT, Spain
A. Serizawa ,T. Ishizaki ,T. Sato
Novel aging process for multifunctionalization of Aluminum alloys
Shibaura Institute of Technology, Japan
A. Ferrández-Garcia, T. García-Ortuño, M.T. Ferrández-García, M. Ferrández-Villena, J. Andreu Rodríguez,
C.E. Ferrández-García
Valorization of vine prunings as raw material in the manufacture of particleboard
University Miguel Hernández de Elche, Spain
P. Micó, A.V. Nadal Gisbert, C. Sastre, V. Esquerdo
Fast Characterization of Biobuilding Materials Using Computer Vision Algorithms
A.V. Nadal Gisbert , M. Boix, L. Agud, M. Zamorano, M.A. Peydro, Pau Miró
Mathematical modelling of elastomeric waste compaction process
Rubén Maderuelo, Jorge G. Segura, Antonio Nadal, Ernesto Julia, José E. Crespo, José M. Gadea
Acoustical properties of porous absorbers made from perlite
Z. S. Fu, M. Liu, Z. Q. Fan
Preparation and Characterization of Water-in-octane Nano-emulsion
Zhejiang University, P. R. China
Lanka S. Jayawardene
INTRODUCING FLY ASH AS AN SUSTAINABLE CONSTRUCTION MATRERIAL FOR DEVELOPING COUNTRIES
(SRI LANKA)
Dasuni Associates, Sri Lanka
C.K.P. Moreira, L. R. Sousa, L. P. Almeida, F. F. C. Tavares
Soil-Cement Blocks produced from civil construction waste and kaolin processing
University of the Amapá State, Brazil
C. Martínez-García, T. Cotes-Palomino, R. Cortés-Jiménez, R.D. Farias, L. Barbieri, I. Lancellotti
Preliminary study of the production of lightweight aggregates made from waste with fertilizer
properties
University of Jaén, Spain
C. Martínez García, M.T. Cotes Palomino, J. Martínez Nájera, A.M. Coves Martínez
Innovative Teaching Techniques in Chemical and Material Engineering: Development of Laboratory
Practices Videos
C. Martínez-García, T. Cotes-Palomino, R. Cortés-Jiménez, R.D. Farias, F.J. Iglesias-Godino, D. ElicheQuesada, F.A. Corpas-Iglesias
Obtaining fertilizers liquid extraction from alpeorujo compost and horse manure: Initial analysis
process
R.J. Galán-Arboledas, C. Martínez, T. Cotes, S. Bueno
22
Technology properties and valorisation potential of steel ash in traditional clay based bricks
Innovarcilla Foundation, Spain
M. Palacios, L. Núñez, S. Suárez, B. Sánchez, M. Pujadas, J. Fernández-Pampillón
Selection of commercial photocatalytic materials based on their air-purifying ability
CIEMAT, Spain
Le Li,Minqiang Wang, Zhi Yang, Jing Liu, Zhuo Xu
Facile one-pot production of facet coupled MoS2/TiO2 nanosheets for organic pollutants degradation
under visible LED light irradiation
Xi’an Jiaotong University, China
A Ferrández-García,M.T. Ferrández-García,M. Ferrández-Villena,J. Andreu Rodríguez,T. GarcíaOrtuño,C.E. Ferrández-García
The influence of Starch in Canary Island Palm tree trunk panels without synthetic adhesive
University Miguel Hernández de Elche, Spain
Luis Meira,Luis Freire,Anabela S. Oliveira
Degradation of Indigoides with Fenton reagent for Textile effluent treatment – Influence of the Water
TYPE
Polytechnic Institute of Portalegre, Portugal
FENTON PROCESS ON DYE DEGRADATION OF REMAZOL BLUE RGB IN Model WASTEWATERS OF
TEXTILE INDUSTRY – INFLUENCE OF pH
Synthesis of TiO2 doped with M (III) ions (M = Fe and Cr) and N/TiO2 Photocatalysts to increase their
photocatalytic in the visible region
Use of TiO2 doped with M (III) ions (M = Fe and Cr) and N/TiO2 Photocatalysts to Photodegradation of
effluents containing pesticides
N. Madaoui,N. Saoula,K. Kheyar,A. Hammouche,S. Nezar,B. Larbi
Protection of stainless steel for corrosion application by titanium dioxide PVD coating in 3.5% NaCl
solution
Centre for Development of Advanced Technologies, Algeria
C.B. Wang,L. Li,Q. Shen,L.M. Zhang
Temperature and concentration dependences of transport and thermochromic properties of
(La,Sr)MnO3 thin films
Wuhan University of Technology, China
E. Orozaliev ,I. Tarasov ,M. Shevtsova
Comparative study of two kind matched-die moulding
to forming the large polymeric composite parts
Saratov State Technical University, Russia
Ercan YILMAZ ,Aysegul KAHRAMAN ,Aliekber AKTAG,Senol KAYA,Ramazan LOK,Huseyin KARACALI
Effects of Interface States and Series Resistance on Electrical Characteristics of Er2O3 MOS Capacitors
Center for Nuclear Radiation Detector Research and Applications, Turkey
23
A. Turowska ,J. Adamiec
Finite element modeling and simulation of laser welding Inconel 600 alloy finned pipes
Silesian University of Technology, Poland
Takahiro Ishizaki,Naosumi Kamiyama
Formation of the anticorrosive film on Mg alloy by steam coating and its corrosion resistance
Shibaura Institute of Technology, Japan
R. Segura ,O. Gutierrez ,I. Velazquez
Integral development of high productivity and sustainability rabbit farm, for small producers with the
use of advanced composites
AIT GROUP - RASE Productive Projects, Mexico
V. Capdevila ,M.C. Gely ,V. Kafarov ,A.M. Pagano
Valorisation of waste food industry for producing second generation bioethanol
University of the Centre of Buenos Aires Province (UNICEN), Argentina
Gisele Azimi, Kripa Varanasi
Hydrophobicity of rare earth oxide ceramics – a novel approach to sustained hydrophobicity
University of Toronto, Canada
Z. Q. Fan, M. Z. Qi, Z. S. Fu
Manufacture of polyethylene/poly(ethylene-co-propylene) reactor blends by gas phase polymerization
with metallocene catalyst
Zhejiang University, Hangzhou, China
Laborde Fernanda,Serna González Medardo,Pagano Ana,Gely Cristina
TECHNICAL-ECONOMIC STUDY OF THE ESTERIFICATION PROCESS OF USED VEGETABLE OILS (UVOs)
USING HEAT EXCHANGE NETWORKS (HENs)
University of the Centre of Buenos Aires Province (UNICEN), Argentina
T. M. Ismail, M. Abd El-Salam, E. Monteiro, P. Brito, A. Rouboa
CFD Modeling of Coffee Husk Gasification
Suez Canal University, Egypt
Friday, 17th July 2015
NOR bochra,RAHMOUN Khadidja
The crystallization of the bulk metallic glasses by using the RFDA
University of Tlemcen, Algeria
V. Zavala-Alonso ,A. Monjarás-Avila ,G. Morales-Alcocer,G. Martínez-Castañón,N. Patiño-Marín,J.
Ramírez-González,J. Reyes-Macías
Surface Micro-hardness Evaluation of Healthy and Fluoridated Human Enamel
University San Luis Potosí, Mexico
Na-Ra Park ,Hon Chung Shin ,Hyun Kyu Shin ,Jae-Chul Lee
24
Sintering of 0.8㎛WC-27.6wt.%Ni-1.61wt%Si-0.99wt.%B4C for seal ring tip and effect of Ni, B4C and Si
on mechanical properties
Korea institute of Carbon Convergence Technology, Republic of Korea
Lei Wang,Binbin Li,Zhaofeng Chen
Technical Investigation on Vacuum Pulse Nitrocarburization of 4Cr5MoVSi
Nanjing University of Aeronautics and Astronautics, China
S.G Wang ,W.G. Zhai,X.M. Han,Y. Huang,L.Wang,Z.F. Chen
Interfacial microstructure of Titanium-Steel composite plates
with explosive welding
Nanjing University of Aeronautics and Astronautics, China
F. Bessaha,N. Mahrez,F. Kasmi,D. Merouani,K. Marouf,A. Khelifa
Characterisation and application of a modified halloysite
University Abdelhamid Ibn Badis Mostagane, Algeria
B. Bahloul,L. Amirouche
A First Principle Study of the ordered Zn1-xCdx Alloy
USTHB, Algeria
R. Tupciauskas,M. Andzs,M. Puke,A. Paze,P. Brazdausks,K. Meile,N. Vedernikovs,J. Rizhikovs
The Potential of Hemp (Cannabis Sativa L.) Shives to Obtain Self-binding Board after Pre-treatment and
Steam Explosion
Latvian State Institute of Wood Chemistry, Lativa
Hadia Noor ,Hassan Yousaf ,M. Adnan Naseer ,Nimra Iqbal ,Natasha Tariq ,Saira Riaz ,Shahzad Naseem
Ball Milling Effect on Structural, Optical and Dielectric Properties of Y2O3
Centre of excellence in Solid State Physics, Pakistan
P. Wang,Y. Lim,D Chi
Microstructure Studies of Carbon Nanotube Reinforced Inconel 625 Superalloy Pars Processed Using
Selective Laser Melting
Agency for Science, Singapore
Sepehr Ghafari ,Fereidoon Moghadas Nejad
Determination of the Low Temperature R-Curves Using a Modified Single Specimen SE(B) Test
Technique for Asphalt Concrete Mixtures
Amirkabir University of Technology, Iran
N. Mahrez,F. Bessaha,F. Kasmi,D. Merouani,K. Marouf,A. Khelifa
Physicochemical and adsorptive properties of an
intercalated halloysite,University Abdelhamid Ibn Badis Mostaganem, Algeria
Y. Bozkurt
Dissimilar friction stir welded joints between AA2124/SiC-T4 MMC
and AA3003-H24 alloy
Marmara University, Turkey
S. de O. Moreno ,R. O. Goes ,J.A. P. da Silva ,F. F. da C. Tavares
Analysis of the resistance to tension of the composite made from açaí seed fibers
University of the Apamá State, Brazil
F. Messaoudi ,O. Haddad,R. Bouras ,S. Kaci ,M. Sonebi
Experimental characterization of flowable cement pastes made with marble waste
Mouloud Mammeri University of TiziOuzou, Algeria
25
I.ELFADIL,R.ALTARAWNEH,M.BATARSEH,M.ELAZZOUZI
Multiresidue Analysis of Pesticides in Soil Profile from the Loukous Valley using GC-ECD
Faculty of Sciences Agdal Raba, Morocco
Shipra Baluja, Kajal Nandha
Thermodynamics of solubility of some quinazoline derivatives in variousc solvents at different
temperaturas
Saurashtra University, India
A. Sionkowska, K. Lewandowska, S. Grabska, A. Liszewska
Characterization of thin collagen/hyaluronic acid blend Films
Nicolaus Copernicus University, Poland
J.E. Crespo Amoros, A.V.Nadal Gisbert, F. Parres Garcia, J. Segura Alcaraz, A. Macías García
Study of the elastic behaviour of a composite laminated material made from recycled products from
End of Life Tires (ELT's)
Polytechnique University of Valencia, Spain
A.V. Nadal Gisbert, L. Pascual, Eduardo Fages Santana, O. Gutierrez Moscardó
Mechanical characterization of plaster matrix composites reinforced with polymer and ceramic fibers
Polytechnique University of Valencia, Spain
M.J. Lavorante ,J.I. Franco
Nafion®117 and its neutralization reaction by conductometric titration
CITEDEF, Argentina
S. Alzamanan, G. Redmond
Novel Polymer Nanostructures for Biotech and Energy Applications
UCD School of Chemistry and Chemical Biology, Ireland
N. FARES, Nadir BOUARISSA
POSITRON ENERGY LEVELS AND RELATED PROPERTIES IN AlSb University of Bordj-Bou-Arréridj, Algeria
Mohamed Bentoumi, Djamel Bouzid, Alain Iost
Optical and mechanical characteristics of Flint glass and Zerodur during the indentation test
University Ferhat Abbas Sétif 1, Algeria
C. Gilarranz
Paths and roads stabilization of Jabre-Portland cement
Polytechnic University of Madrid, Spain
C. Gilarranz
Paths and roads stabilization of Jabre-CEM II A-M 42,5R
Polytechnic University of Madrid, Spain
Pedro Romano, Paulo Brito
The advantages of monitoring structures: presentation of experimental results
A. Rais, K.Taibi, A.Addou
Structural and Vibrational Studies of Mg Crx Fe2-x O4 Ferrites Laboratory of Sciences and Techniques
of Environment and Valorization, Algeria
26
A. Szczęsny ,D. Kopyciński,J. Dorula
Effect of austenite grain count on the mechanical properties of inoculated cast iron
University of Science and Technology, Poland
Materials in Industry
P. Suly ,P. Krcmar ,J. Maslik ,P. Urbanek ,I. Kuritka
Polyvinyl Alcohol: Preparation of a Polymer Ink for Patterning of Substrates by Piezoelectric Drop-onDemand Inkjet Printer
Tomas Bata University in Zlin, Czech Republic
I. VELAZQUEZ ,R. SEGURA
DEVELOPMENT OF NOVEL COATING FREE VOC's (VOLATILE ORGANIC COMPOUNDS) WITH HIGH ANTI
CORROSION PROPERTIES
TREMET S.A DE C.V.- RASE Proyectos Productivos, Mexico
D. Kada, A. Koubaa, G. Tabak, A. Boudenne
Thermal and Tensile Properties of Short Carbon Fiber Reinforced Polypropylene Composites
University of Sciences and Technology Houari Boumediene, Algeria
Susete N. Fernandes, João P. Canejo, Ana Almeida, Pedro L. Almeida, Mónica Della Pirriera, Pau BoschJimenez, Théodulf Rousseau, Pascal Pierron, Maria H. Godinho
Taylor-made materials for flexible organic photovoltaic sensors
Lisbon New University, Portugal
Ana P.C. Almeida, João P. Canejo, Susete N. Fernandes, Pedro L. Almeida, Mónica Della Perriera, Pau
Bosch-Jimenez, Théodulf Rousseau, Pascal Pierron, Maria H. Godinho
Printed photoactive inks for flexible organic photovoltaic technology
Lisbon New University, Portugal
Salim Arruda, Eduardo Canedo, Yeda Medeiros
Study of Non-isothermal crystallization of PHB / babassu fiber and its kinetic modeling
Federal University of Pernambuco, Brazil
A.M. Mandalihan, J. Sitjar, E. Magdaluyo, Jr.
Mechanical and Swelling Properties of TiO2-reinforced Silicone Sealants
University of the Philippines Diliman, Philippines
27

Linked - ScienceKNOW Conferences

Transcription

Similar documents

w w w .heinner.ro

16–19 March 2015

Biochemical Reagents Ver.5

projects

Proceedings - ISES International Solar Energy Society

therapie in der Onkologie

The Textile Collection of the Museu Nacional de Arte Antiga