IGTI Brochure - ASME.org community
Transcription
IGTI Brochure - ASME.org community
Upcoming Conferences ASME Turbine Blade Tip Symposium and Course Week Sept. 30 - Oct. 3, 2013 | Hamburg, Germany The present multidisciplinary ASME 2013 Turbine Blade Tip Technical Symposium and Course Week addresses the current state of the art in the design, analysis, and improvement of turbine blade tips. Despite decades of applied research, the issue of blade tip burnout has remained as one of the most intractable in gas turbines. Yet the degradation of blade tips continues to represent a large fraction of the turbine losses, both in terms of the operational aero-thermal efficiency and the engine life cycle maintainability. A two-day course of lectures will precede the technical symposium to provide background, state-of-the-art design, and operability issues surrounding the topic. A two-day symposium will build upon the lecture series with current proposed or enacted solutions, studies to gain insight to the physics, and an industry panel session for open discussion. Interested attendees can register for the course only, symposium only, or for both parts of the event. http://asmeconferences.org/TBTS2013/ ASME Organic Rankine Cycle 2013 October 7-8, 2013 | Rotterdam, The Netherlands Organic Rankine Cycles (ORCs) power plants are gaining ever increasing interest as cost-effective sustainable energy systems. By using an appropriate organic working fluid in a Rankine thermodynamic cycle, ORC power plants are able to efficiently convert renewable energy sources into electricity. Their power capacity spans from few kWe to few MWe for a single unit, but multiple units in parallel can make up a multi megawatt power station. Among the multitude of applications of this technology, several stand out: ORC systems can be used to obtain electricity from geothermal reservoirs, biomass combustion and gasification, solar radiation, waste heat recovery from internal combustion engines and gas turbines, as well as a large variety of industrial processes discarding heat at low and moderate temperatures. The ORC market is growing at an impressive pace, with currently many hundreds of units of various sizes operating reliably for many years all over the world. http://www.asme-orc2013.nl/ ASME Gas Turbine India Conference December 5-6, 2013 | Bangalore, India PRESENTED BY THE ASME GAS TURBINE INSTITUTE AND CSIR NATIONAL AEROSPACE LABORATORIES ASME Gas Turbine Chapter of India, supported by ASME International Gas Turbine Institute (IGTI), announces the ASME 2013 Gas Turbine India Conference to be in Bangalore, Karnataka, India on December 5-6, 2013. If you are involved in the area of GT Design & Research, this conference will give you the unique opportunity to interact with experts in the gas turbine industry, as well as find out the latest methods and cutting-edge technology that can improve how gas turbines operate in the future. http://www.asmeconferences.org/GTIndia2013/ ASME Turbo Expo 2014 June 16 - 20, 2014 | Düsseldorf, Germany ASME Turbo Expo is recognized as the must attend event for turbomachinery professionals. The technical conference has a well-earned reputation for bringing together the best and brightest experts from around the world to share the latest in turbine technology, research and development, and application in the following topic areas: gas turbines, steam turbines, wind turbines, fans & blowers, solar brayton & rankine cycle and supercritical CO2. The 3-day exhibition attracts the industry's leading professionals and key decision makers, whose innovation and expertise are helping to shape the future of the turbomachinery industry. http://www.asmeconferences.org/TE2014// The International Gas Turbine Institute (IGTI) of ASME provides advocacy, professional development, information and networking opportunities for turbomachinery professionals. We are the society representing turbomachinery professionals like you. Get Involved! You can belong to the IGTI community by paying dues to ASME and selecting “#22 The International Gas Turbine Institute” as your primary technical division/area of interest. Go to www.asme.org Go to “Membership” menu button, then select “Members only” from the dropdown menu. Log in with last name and ASME member number. Click “Update Professional Profile” link. Go to “Select your technical division/interest in order of importance”. In the top box, choose “Gas Turbine Institute” from the dropdown list. Finally, click “Update” button. Member Benefits By selecting #22 as your primary technical division/area of interest, you will be eligible for a wide variety of benefits that relate directly to the gas turbine industry, such as: The Global Gas Turbine News, included quarterly in ASME's Mechanical Engineering Magazine. Discounted conference registrations and proceedings for IGTI events such as Turbo Expo. Student Scholarships for study at accredited universities or a young engineers travel stipend to attend Turbo Expo to present a paper. The opportunity to network and participate in one of our specialized committees . Visit go.asme.org/IGTI and click on committees for a complete list. ASME & IGTI’s prestigious gas turbine industry awards and monetary honorariums. IGTI Conferences & Expositions Participating in an IGTI organized conference or exposition is a crucial part of a career within the global turbine community. Since 1956 IGTI has been an important resource for the turbine community, hosting a prestigious annual conference and exposition, Turbo Expo. With more than 50 years of experience, IGTI offers the best conferences and expositions focused on turbines and turbine professionals. ASME Turbo Expo is the largest and most important annual, international event for gas turbine technology. Members receive discounted registration that includes: Networking with the industry’s best Premier Technical Conference offering hundreds of presentations on the state-of-the-art in technology Proceedings containing over 1,000 peer-reviewed technical publications from all the top companies and researchers Premium exposition of turbine products and services Complimentary daily lunches and receptions Other conferences organized by IGTI focus on specialties within turbine technology such as users, cogeneration, aero engine life management, energy infrastructure, and regional interests. As the field evolves and the market changes, IGTI has the flexibility and uses its resources to respond to member needs with the appropriate forum. ASME IGTI is the society for turbine professionals like you! Visit us on the Web! go.asme.org/IGTI ASME INTERNATIONAL GAS TURBINE INSTITUTE Phone: +1-404-847-0072 Fax: +1-404-847-0151 Email: [email protected] The International Gas Turbine Institute (IGTI) of ASME provides advocacy, professional development, information and networking opportunities for turbomachinery professionals. We are the society representing turbomachinery professionals like you. Get Involved! You can belong to the IGTI community by paying dues to ASME and selecting “#22 The International Gas Turbine Institute” as your primary technical division/area of interest. Go to www.asme.org Go to “Membership” menu button, then select “Members only” from the dropdown menu. Log in with last name and ASME member number. Click “Update Professional Profile” link. Go to “Select your technical division/interest in order of importance”. In the top box, choose “Gas Turbine Institute” from the dropdown list. Finally, click “Update” button. Member Benefits By selecting #22 as your primary technical division/area of interest, you will be eligible for a wide variety of benefits that relate directly to the gas turbine industry, such as: The Global Gas Turbine News, included quarterly in ASME's Mechanical Engineering Magazine. Discounted conference registrations and proceedings for IGTI events such as Turbo Expo. Student Scholarships for study at accredited universities or a young engineers travel stipend to attend Turbo Expo to present a paper. The opportunity to network and participate in one of our specialized committees . Visit go.asme.org/IGTI and click on committees for a complete list. ASME & IGTI’s prestigious gas turbine industry awards and monetary honorariums. IGTI Conferences & Expositions Participating in an IGTI organized conference or exposition is a crucial part of a career within the global turbine community. Since 1956 IGTI has been an important resource for the turbine community, hosting a prestigious annual conference and exposition, Turbo Expo. With more than 50 years of experience, IGTI offers the best conferences and expositions focused on turbines and turbine professionals. ASME Turbo Expo is the largest and most important annual, international event for gas turbine technology. Members receive discounted registration that includes: Networking with the industry’s best Premier Technical Conference offering hundreds of presentations on the state-of-the-art in technology Proceedings containing over 1,000 peer-reviewed technical publications from all the top companies and researchers Premium exposition of turbine products and services Complimentary daily lunches and receptions Other conferences organized by IGTI focus on specialties within turbine technology such as users, cogeneration, aero engine life management, energy infrastructure, and regional interests. As the field evolves and the market changes, IGTI has the flexibility and uses its resources to respond to member needs with the appropriate forum. ASME IGTI is the society for turbine professionals like you! Visit us on the Web! go.asme.org/IGTI ASME INTERNATIONAL GAS TURBINE INSTITUTE Phone: +1-404-847-0072 Fax: +1-404-847-0151 Email: [email protected]