VAS 6292 Wheel Alignment Systems

VAS 6292 Wheel Alignment Systems
ˆ
Customized for Volkswagen, Audi, Porsche, SEAT, Skoda and Bentley Vehicles
NEW!
NEW! VAS 6292 systems offer greater profit and produ
VAS 6292 alignment systems now feature
Hunter HawkEye Elite® technology, improving the
speed, ease and accuracy of alignment service.
Customized VAG software!
The advan
4 Provides simple, vehicle-specific
measurement and adjustment instructions
4 Includes steps necessary for proper
alignments on all Volkswagen Group vehicles.
Four high-resolution cameras!
4 P rovides pinpoint accurate measurements
and instant adjustment updates
QuickComp!
Avoid Damage to Expensive Rims
4 G
rips tire, not rim
4 No metal-to-metal
contact
4 Only protective ring
contacts rim
4 C
ompensate all wheels and capture initial
measurements in one motion
uctivity with HawkEye Elite® technology
ntages of
QuickGrip
™
Extremely Fast Installation
4 Spring-loaded adjust easily to wheel size
4 Single lever locks the clamp – no knob twisting
4 Off-center clamping has no effect on accuracy
Less Weight, Easy-to-use!
Low Maintenance
4 S hop-tough polymer
structure withstands
drops
4 No electronics, cables
or calibration
4 L ightweight, only 2.72 kg vs. 7.25 kg
(6 lbs. vs. 16 lbs.)
4 Only occasional
cleaning required
4 Easy to work around
D
ESTIMATE
8 MINUGST!E
SAVIN
Exclusive Live Ride Height feature
provides exact measurements in seconds
Hunter’s Live Ride Height Measurement System
automates ride height measuring procedures as specified
by the vehicle manufacturer. Accurate to within one
millimeter, Live Ride Height instantly displays continuous
measurements compared to vehicle specifications.
Color-coded bar graphs show adjustments needed
to set ride height within the vehicle’s specifications.
Important Note:
All new Volkswagen Group vehicle models
require ride height to be measured.
u
D
ESTIMATE
7 MINUGST!E
CAMM ® takes the guesswork out of VW
Touareg dual-cam camber and caster adjustment
SAVIN
CAMM® (Control Arm Movement Monitor) tracks live
caster and camber measurements for precise front and rear
cam adjustment.
4 CAMM computes the exact mechanical geometry of
the suspension control arm, so correct adjustments
can be made on the first try.
4
Easily switch between front and rear control arms to
fine-tune the adjustment.
4
Current camber and caster measurements can be
displayed for reference at operator’s discretion.
4 Without CAMM, adjusting control arm camber
and caster is a trial and error process!
CAMM adjustments with camber and caster
measurements displayed for reference.
D
ESTIMATE
5 MINUGST!E
SAVIN
ADR, ACC, LDW and Night Vision system calibration faster and easier
If your alignment bay is too short to accommodate the VAS 6430 calibration fixture, Hunter’s VAS 6292 Alignment System
offers a solution. If the bay or lift configuration allows, the vehicle can be rolled rearward on the lift/rack until the required
distance is obtained.
<120 cm
u
120 cm
u
Measurements are not valid;
distance is not adequate.
Measurements are valid;
distance is adequate.
ACC measurement procedure utilizing optional HE421 radar aiming cameras.
VAS 6430 ADR/ACC/LDW/Night Vision Fixture
VAS 6430 available through your
VAG equipment supplier.
Hunter radar aiming camera kit
(20-2697-1).
Important Note:
V.A.G requires ADR/ACC/LDW/Night Vision
calibration whenever vehicle alignment is adjusted.
u
VAS 6292 Console Options
Recommended VAS 6292 Equipment Package*
WinAlign Series with premium large cabinet
(WA440VEVAGE, shown with optional 27 in. LCD monitor)
(WA430VEVAGE, shown with optional 22 in. LCD monitor)
Computer includes:
- Current WinAlign® software
- Electronic software authorization key for VAG software
- Two years of VID updates
- Two-year subscription to HunterNet™ featuring WebSpecs®
-Intel® Core™ i3 processor – 3.06 GHz (or greater)
- 4 GB RAM
- 120.0 GB SSD or 250.0 GB SATA hard drive (or greater)
- Single DVD/CD-RW drive
- USB 2.0
- Network module
-Mouse
WA440VEVAGE
*All new configurations include a 3-year warranty on PC and installed components.
-Windows® 7
-Keyboard
-iShop™ and ASANet™ compatible
Standard Accessories:
-
-
-
-
Steering wheel holder
Brake pedal depressor
Select one of the following camera sensor types:
FC,WM, FM, CR, CS or LZ
Wide-angle three-dimensional targets and QuickGrip® adaptors
WA430VEVAGE
Choose the right sensor package for your shop!
HE421WM9BLKE
Wall- and ceiling-mount configurations are perfect
when space is at a premium.
HE421CS9BLKE
HE421FM9VAGE
Floor-mounted overhead camera configuration is
suitable for drive-through applications.
HE421CR9BLKE
Cabinet-mounted configurations are mobile to service multiple alignment bays with one system. Plus, the camera boom
adjusts manually, providing a full range of vertical travel for additional lift height.
Additional Console Options
WA340VEVAGE
WA330VEVAGE
WA320VEVAGE
WA310VEVAGE
WinAlign® software upgrades may require additional and/or upgraded hardware.
Because of continuing technological advancements, specifications, models and
options are subject to change without notice.
w w w. h u n t e r. c o m
11250 Hunter Drive, Bridgeton, MO 63044 USA
Tel: +1 314-731-3020 Fax: +1 314-731-0132
Email: [email protected]
Copyright © 2013, Hunter Engineering Company
Form 5155-TE-05, 06/13