Hanna Instruments Canada

Transcription

Hanna Instruments Canada
Company’s Profile
pH / ORP / Temperature Measurement .................3
HANNA INSTRUMENTS CANADA
Conductivity Measurement....................................9
Guide for Direct Soil Measurement.....................15
Combined Measurement ......................................16
Directions for Field Preparations
of Soil Samples.....................................................20
Established in November 1990, Hanna Instruments Canada inc.
has proven that good customer service is the key to success in the
field of electro-analytical instrumentation. Our people are driven by
your appreciation of our outstanding after-sales service and
technical support.
Hanna Instruments Canada is a member of the world’s leading
manufacturer Hanna Instruments that has sales offices in over 30
countries.
Dissolved Oxygen Measurement ........................21
Light Intensity Measurement ...............................23
Nutrient Management
Chemical test kits....................................................24
Single/dual parameter Ion Specific Meter...............25
Grow Master ...........................................................26
Honey Color Analysis...........................................27
Maple Syrup Color Analysis ................................28
CUSTOMER SERVICE
Thermometers & Hygrometers ............................29
Control Systems ...................................................36
For information or technical service. . . . . . . . . . . 1-800-842-6629
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450-629-3335
General email . . . . . . . . . . . . . . . . . . . . . . . . [email protected]
Technical service email. . . . . . . . . . . . . [email protected]
Personalized Kits & Accessories ........................41
w w w . h a n n a c a n . c o m
Calibration & Maintenance Solutions .................42
Warranty Policy.....................................................43
1
QUEBEC OFFICE
T (450) 629-1444
F (450) 629-3335
BC OFFICE
T (604) 572-7647
F (604) 572-7648
ONTARIO OFFICE
T (905) 876-9358
F (905) 876-9359
2004 Agricultural Catalog
pH / ORP / Temperature Measurement
Testers
The pHep®4 & pHep®5 comes
with a replaceable probe for
easy maintenance.
The pHep®4 & pHep®5 include features such as a dual-level LCD,
battery level indicator, replaceable pH electrode cartridge, temperature
in °C or °F, stability indicator, automatic shut-off and automatic
calibration all in a floating, waterproof casing. There is no other
value like the pHep® brand of testers!
These testers will go beyond your expectations!
•
•
•
•
•
•
SPECIFICATIONS
Range
pH
T°
Resolution
pH
Waterproof, floating
Large dual-level LCD
Stability indicator
% battery power illumination
Automatic shut-off
Automatic calibration
T°
pH
T°
Accuracy
Temp. Comp.
Battery Life
Dimensions
Weight
pHep®4 - HI 98127
0.0 to 14.0
0.1
pHep®5 - HI 98128
0.00 to 14.00
0.0 to 60.0°C or 32.0 to 140.0°F
0.01
0.1°C or 0.1°F
± 0.1
± 0.05
± 0.5°C or ± 1°F
Automatic
Approx. 350 hours continuous use
163 x 40 x 26 mm (6.4 x 1.6 x 1”)
85 g (3.0 oz)
INFO
Champ
®
pHep
®
•
•
•
•
SPECIFICATIONS
Range
Resolution
Accuracy
Calibration
Battery Life
Dimensions
Weight
Cloth pull-out junction
Large LCD
1 point calibration
0.2 pH accuracy
Champ® - HI 98106
0.0 to 14.0 pH
0.1 pH
± 0.2 pH
Manual 1 point
Approx. 800 hours of cont. use
175 x 41 x 23 mm (7.9 x 1.8 x 1”)
78 g (2.7 oz)
•
•
•
•
Cloth pull-out junction
Large LCD
2 point calibration
0.1 pH accuracy
pHep® - HI 98107
0.00 to 14.00 pH
0.1 pH
± 0.1 pH
Manual 2 points
Approx. 1700 hours of cont. use
175 x 41 x 23 mm (7.9 x 1.8 x 1”)
78 g (2.7 oz)
Most pesticides and fungicides
perform more effectively when the
pH of the tank mix is below 6.5
on the pH scale. Always check
your chemical manufacturers
directions for optimum pH levels.
Economical pH Testers
The Champ® incorporates a large LCD, pull-out cloth
junction and Battery Error Prevention System in a rugged
casing. The pHep® has 2 point calibration, large LCD, pull out
junction and 1700 hours of battery life!
No wonder they are the hot seller across Canada!
2
Testers
HI 98201 - ORP Tester
HI 98120 & HI 98121
ORP/T° & Combo (pH/ORP/T°) testers
Economical way to check
the concentration of sanitizers
HI 98120 & HI 98121 include features such as a dual-level LCD, battery
level indicator, replaceable pH electrode cartridge, temperature in °C or °F,
BEPS (Battery Error Prevention System) stability indicator, automatic shutoff and automatic calibration all in a floating, waterproof casing.
In certain applications, ORP is
used to determine the effects of
soil compaction and the viability
of the soil to maintain the proper
level of oxygen.
•
•
•
•
Another way to satisfy your needs !
SPECIFICATIONS
HI 98120
HI 98121
Range
pH
0.00 to 14.00
ORP
± 1000 mV
± 1000 mV
T°
0.0 to 60.0°C or 32.0 to 140.0°F
Resolution
pH
0.01
ORP
1 mV
1 mV
T°
0.1°C or 0.1°F
Accuracy
pH
± 0.05
ORP
± 2 mV
T°
± 0.5°C or ± 1°F
pH Calibration
Automatic
Temp. Comp.
pH Automatic
Battery Life
Approx. 300 hours cont. use
Approx. 250 hours cont. use
Auto-off after 8 minutes of non use
Dimensions
163 x 40 x 26 mm (6.4 x 1.6 x 1”)
Weight
85 g (3.0 oz)
Clog-resistant cloth junction
Platinum electrode
Covers full ORP range
Large LCD & rugged housing
SPECIFICATIONS
ORP - HI 98201
Range
± 999 mV
Resolution
1 mV
Accuracy
± 5 mV
Battery Life
Dimensions
175 x 41 x 23 mm (7.9 x 1.6 x 0.8”)
Weight
78 g (2.7 oz)
HI 98103CP pH Checkpak
®
The ideal product
for beginners & hobbyists
The pH Checkpak® includes
the Checker®1 pH tester which
provides growers with fast and
accurate pH readings. The
Checker®1 is easy to calibrate,
uses a replaceable pH electrode
and works for 3000 hours
before you have to change the
batteries!
•
•
•
Large easy to read LCD
Renewable junction
Rugged ergonomic casing
SPECIFICATIONS
Range
Resolution
Accuracy
Battery Life
Dimensions
Weight
3
Including pH tester, solutions,
calibration screwdriver and
instruction manual.
pH Checkpak® - HI 98103CP
0.00 to 14.00 pH
0.01 pH
± 0.2 pH
66 x 50 x 25 mm (2.6 x 2 x 1”)
70 g (2.5 oz)
HI 98103GC Growers Field Checker®
Read pH directly on the sample!
•
•
•
•
•
•
Measure directly from the sample
Large LCD
High accuracy with
0.01 pH resolution
2 point calibration
Full range: 0.00 to 14.00 pH
Pocket size
The Growers Field Checker® HI 98103GC, allows the user
to dertermine the pH of fruit and plant tissue in the field with
just a few drops of sap or juice. If your sample does not
contain sufficient liquid, add an equal portion of deionized
water to extract the sample pH. Hanna Instruments Growers
Field Checker® works with you to help obtain superior crops. It is
supplied with a flat tip pH probe, which allows for minimal liquid
samples, soft carrying case, pH 4 & pH 7 calibration solution,
deionized water sachet, 100 ml sample beaker and screwdriver.
SPECIFICATIONS
Range
Resolution
Accuracy
Calibration
Electrode
Battery Life
Dimensions
Weight
Growers Field Checker - HI 98103GC
0.00 to 14.00 pH
0.01 pH
®
± 0.2 pH
Manual 2 points through trimmers
HI 1413S/50 (included)
66 x 50 x 25 mm (2.6 x 2 x 1”)
70 g (2.5 oz)
Monitors
INFO
pH Meters Calibration & Maintenance
pH & T° monitor
pH meter calibration
Single point calibration
• Soak your tester/probe 1 inch (2.5 cm) deep into pH 7.01 calibration
solution.
• Wait 20-30 sec. for reading to stabilize.
• Adjust calibration screw/knob to read 7.0 on display.
• Verify tester by soaking in pH 4.01 calibration solution, and waiting for
reading to stalilize at a reading of 4.0.
• Your meter/tester is calibrated & ready to go!
*Perform calibration at least every 5-7 days and/or after cleaning procedure.
The Gro’Chek from Hanna has a dual-level
backlit LCD to give you instantaneous
readings of both pH and temperature. The
microprocessor
provides
automatic
calibration, automatic buffer selection and
automatic temperature compensation.
•
•
•
•
•
•
Waterproof
Dual-level backlit LCD
Combination pH/To probe
SPECIFICATIONS
Range
pH
T°
Resolution
pH
T°
Accuracy
pH
T°
Temp. Comp.
Power Supply
Dimensions
Weight
Stability indicator
Extra large display
12 VDC power supply
Double point calibration
solution.
• Adjust pH 7 calibration screw/knob to read 7.0 on display.
• Remove tester/probe and rinse with tap water.
solution.
• Adjust pH 4 calibration screw/knob to read 4.0 on display.
• Your meter/tester is calibrated & ready to go!
*Perform calibration at least every 5-7 days and/or after cleaning procedure.
HI 991401
0.00 to 14.00
0.0 to 60.0°C or 32.0 to 140.0°F
0.01
0.1°C or 0.1°F
± 0.01
± 0.5°C or ± 1°F
Automatic
External 12 VDC (included)
160 x 105 x 31 mm (6.2 x 4.1 x 1.2”)
190 g (6.7 oz)
**For meters/testers equipped with automatic calibration, please refer to
instruction manual.
pH meter maintenance
Cleaning procedure
• Soak your tester/probe 1 inch (2.5 cm) deep into HI 7061 cleaning solution
for 1 hour.
• Next soak terster/probe in HI 70300 sotrage solution to rehydrate.
• Rinse with tap water and perform a calibration prior to use.
• Should you not need to use your tester/meter for a few days, store it into
HI 70300 storage solution (see below).
*Periodic cleaning of testers/probes will eliminate erratic readings and
unexpected tester/probe replacement.
pH Monitor with Large LCD
The popular Gro’Chek pH monitor has been
updated with a larger, easy-to-read LCD.
Waterproof casing guarantees operation after
accidental exposure to water. Greenhouses
high humidity is not a threat to this rugged
monitor. Its professional pH electrode gives
you accurate results every time.
•
•
•
•
•
SPECIFICATIONS
Range
Resolution
Accuracy
Temp. Comp.
Power Supply
Dimensions
Weight
Storage
• Should you not forecast to use your tester/meter for a few days, simply
fill its sensor cap with HI 70300 storage solution.
• For long term storage (months), it is recommended to fill a container with
2 inches (5 cm) of HI 70300 storage solution and let the tester/probe sit
in it. Monitor the storage solution level periodically as it will evaporate
over time.
*Storage prevents pH sensors from premature degradation and allows for
ultra fast sensor response/reading. A sensor left dry for more than 2-3 months
will give slow response, will suffer from drifting of readings and other
malfunctions. A sensor replacement will then be needed.
Waterproof
Rugged housing
Large LCD
High accuracy
12 VDC power supply
HI 991401
0.0 to 14.0 pH
0.1 pH
± 0.2 pH
Manual 2 points
84 x 94 x 33 mm (3.4 x 3.7 x 1.3”)
150 g (53 oz)
Installation for in-line applications
Water
Source
Injector
pH Electrode
Acid or Fertilizers
4
Monitors
ORP indicator with alarm signals
HI 982401 is a simple-to-operate and practical meter for ORP (Oxidation Reduction Potential) measurements. It
continuously monitors ORP from - 999 to + 999 mV. The HI 982401 front case also incorporates a large, bright LED
indicator. Should the measurements fall below the user-selectable ORP values, the red LED starts flashing to alert the
operator of an undesired condition. Both the LCD showing the measurements and the LED can be seen even from a distance.
HI 982401 can be mounted in confined spaces and right next to the vat or barrel containing the chemicals. This casing also
incorporates a molded eye so that it can installed with just a screw.
•
•
•
•
•
Made for small washing stations and
vegetable processing
High quality optional HI 3214P/2 electrode
is recommanded
ORP monitored continuously
Compact, practical and easy-to-install
12 VDC power supply
INFO
ORP (Oxidation Reduction Potential)
is a fast reliable method to determine the
concentration and effectivness of sanitizers.
Wash stands, vegetable washers, irrigation
line clean out, even maple sap lines
can all be monitored
SPECIFICATIONS
Range
Resolution
Accuracy
Setpoint
Electrode
Power Supply
Dimensions
Weight
Special pH/ORP electrodesfor HI 982401 & HI 981406
SPECIFICATIONS
HI 2114P/2 HI 3214P/2
Junction
Cloth
Shape
Sphere
ROD
Plug
BNC
Pressure (Bar/PSI)
3/43.5
Cable
Coaxial
T° range
0 to 80°C
Body
Ultem®
Junction Reference
Double
Cell Reference
Gel
pH/ORP Combo
•
•
2 in 1: pH & ORP monitored simultaneously
Compact, pratical & easy-to-install
pH & ORP monitor with LED alarm signals
HI 981406 has been specially designed for water treatment applications
where both pH and ORP (Oxidation Reduction Potential) need to be
monitored. There are two separate setpoints for pH and ORP which the
operator can adjust at will. Once the pH setpoint is exceeded, the
appropriate LED light will come on to alert the operator. Likewise, once
the ORP level drops below the setpoint, the red ORP light will stay on.
HI 981406 is supplied with HI 1283 ground probe that basically prevents
currents which are prevalent in water basins, from disturbing the
measurements. The optional HI 2114P/2 pH electrode and HI 3214P/2
ORP electrode are specially designed for the swimming pool market.
Their purpose-built fiber salt-bridge is particularly resistant to clogging in
pools.
5
HI 982401
± 999 mV
1 mV
± 5 mV
Selectable from 350 to 850 mV
HI 3214P/2 platinum ORP electrode (optional)
89 x 94 x 33 mm (3.3 x 3.7 x 1.3”)
150 g (5.3 oz)
SPECIFICATIONS
Range
pH
mV
Resolution
pH
mV
Accuracy
pH
mV
Calibration pH
Setpoints
pH
ORP
Alarm
Probes
Power Supply
Dimensions
Weight
HI 981406
0.0 to 14.0
± 999
0.1
1
± 0.2
±5
Manual 1 or 2 points
Adjustable from 5.0 to 9.0 pH
Adjustable from 350 to 850 mV
2 LED’s. ON when the pH is > or ORP is < than the setpoints
HI 2114P/2 pH electrode & HI 3214P/2 ORP electrode (optional)
HI 1283 grounding bar with 2 m cable (included)
12 VDC adapter
165 x 110 x 35 mm (3.4 x 3.7 x 1.3”)
300 g (10.6 oz)
Professional Meters
HI 991001 & HI 991002
SPECIFICATIONS
Range
Resolution
Accuracy
pH Calibration
Temperature Comp.
Electrode includes
Battery Type/Life
Dimensions
Weight
HI 991001
pH
ORP
T°
pH
ORP
T°
pH
ORP
T°
HI 991002
-2.00 to 16.00
-
± 1999 mV
-5.0 to 105.0°C or 23.0 to 221.0°F
0.01
-
1 mV
0.1°C or 0.1°F
± 0.02
± 2 mV
± 0.5 up to 60°C, ± 1°C up to 105°C (± 1°F up to 140°F, ± 2°F up to 221°F)
Automatic 1 or 2 points with 2 set of standardized buffers (4.01, 7.01, 10.01 or 4.01, 6.86, 9.18)
Automatic from -5 to 105°C (23 to 221°F) (for pH only)
HI 1296D combination amplified pH/temperature
HI 1297D combination amplified pH/ORP/T°
with DIN connector and 1 m (3.3’) cable
with DIN connector and 1 m (3.3’) cable
3 x 1.5V AA / approximately 1500 hours of continuous use. Auto-off after 8 minutes
150 x 80 x 36 mm (5.9 x 3.1 x 1.4”)
245 g (8.6 oz)
Extended range waterproof pH/T° & pH/ORP/T° meters
The new HI 991001 and HI 991002 meters from Hanna offer IP 67 waterproof protection in a compact casing. The included multi-parameter electrode has a built-in
temperature sensor. No additional temperature probe is required. The electrode also contains a mini amplifier to render your measurements impervious to noise and
electrical interference. The large display shows readings in an extended range from -2.00 to 16.00 pH and simultaneously shows temperature from -5.0 to 105.0 °C or
23 to 221°F. HI 991002 also measures ORP from -1999 to 1999 mV. The mV scale of this meter can be used with the available HI 1296D pH/temperature electrode to
check the condition of the pH electrode. These meters have a stability indicator and hold feature that prompts you when to take the reading & freezes the display for
easy and accurate recording. The large display also has graphic symbols to guide you through all operations. The battery life of the meters guarantee over 1500 hours
of continuous use. At startup, they perform a self-check and then display the remaining battery level to assure proper working condition. Calibration is performed
automatically at one or two points using standard or N.I.S.T. buffers.
HI 99141
SPECIFICATIONS
Range
Resolution
Accuracy
•
•
•
•
Rugged electrode
Messages on the display
Automatic Temperature Compensation
Boilers and cooling towers pH meter
pH Calibration
Temperature Comp.
Electrode
Battery Type/Life
Dimensions
Weight
pH
T°
pH
T°
pH
T°
HI 991001
-2.00 to 16.00
-5.0 to 105.0°C or 23.0 to 221.0°F
0.01
0.1°C or 0.1°F
± 0.02
± 0.5 up to 60°C; ± 1°C (outside); ± 1°F up to 140°F, ± 2°F (outside)
Automatic
HI 72911 amplified pH electrode with built-in temperature sensor & matching pin (included)
3 x 1.5V AA / approximately 1500 hours of continuous use. Auto-off after 8 minutes
150 x 80 x 36 mm (5.9 x 3.1 x 1.4”)
207 g (7.3 oz)
Hanna’s HI 99141 is a waterproof, portable pH/temperature meter specifically designed for boiler & cooling tower applications. HI 72911 double junction pH electrode
(included) has an unbreakable stainless steel body and a flat tip. The electrode also features an annular Teflon® junction for maximum surface contact giving increased
response and stability. The stainless steel body of the probe functions as a shield and adds to the sensor’s life. The flat tip is easy to clean and prevents solids in
solution from collecting on the sensor. This advanced electrode also contains an integral temperature sensor and a mini amplifier to boost the electrode signal
eliminating the effects of noise and interference. The meter reads from -2.00 to 16.00 pH while simultaneously showing the temperature in °C or °F. Graphic icons
guide operations and a stability indicator with hold feature determines when to freeze the reading for easy record keeping. Calibration is performed automatically at
one or two points with standard or NIST calibration buffers. Battery life is over 1500 hours and at startup, the LCD shows the remaining battery power. In addition, BEPS
(Battery Error Prevention System) prevents bad readings due to low voltage and an auto-off period of 8 minutes saves battery power.
6
Professional Meters
HI 99121
•
Test pH directly in soil, media
and compost material.
Precision kit for measuring pH of soil directly with special electrode
The HI 99121 kit has been designed to address the question of correct and rapid measurement of
pH directly in soil. Every item in this kit has been made to facilitate measurements in the field
without compromising accuracy. HI 99121 can test the pH of soil directly or after preparation of a
diluted sample. In order to measure the pH directly, the kit includes a plastic auger to perforate the
ground. The pH and temperature can be directly tested with the 3-in-1 conic shaped electrode with
even a slightly moist soil. For higher degrees of accuracy, or for stony ground where the electrode
may be damaged, use the specially made HI 7051 test solution. This solution is included in the
package to help you measure pH more precisely by diluting a sample of the soil in it. The kit
naturally includes a pH meter. However, in order to facilitate fast and reliable measurements, the
supplied pH meter is HI 991001 complete with HI 1292D electrode, pH 4 and pH 7 calibration
sachets, beaker, auger and a practical and rugged carrying case. HI 991001 meter is waterproof
and sophisticated yet engineered for its simplicity. The 3-in-1 pH electrode, HI 1292D, has been
designed for direct soil measurement. It has a conic, rugged tip and can be directly inserted in
moist or soft soil. The electrode incorporates a temperature sensor right near the tip to enable it
to measure and compensate for the temperature quickly. It also houses a miniaturized amplifier to
provide greater stability in spot measurements. The dual-level LCD shows the pH value from -2 to
16 in hundredths of units. It also displays the temperature on the secondary level at the same time.
With a menu-driven custom microprocessor, the user is helped with clear prompts during
operation and calibration.
SPECIFICATIONS
Range
Resolution
Accuracy
pH Calibration
Temperature Comp.
Electrode
Battery Type/Life
Dimensions
Weight
7
pH
T°
pH
T°
pH
T°
INFO
Direct pH measurement
is very important when checking
trends in large operations. Fast,
effective verification can detect
problems before they become costly.
See section on how to do
Direct Soil Measurement
HI 99121
-2.00 to 16.00
-5.0 to 105.0°C or 23.0 to 221.0°F
0.01
0.1°C or 0.1°F
± 0.02
± 0.5 up to 60°C, ± 1°C up to 105°C (± 1°F up to 140°F, ± 2°F up to 221°F)
Automatic
HI 1292D glass pH/temperature electrode, with amplifier, DIN connector & 1 m cable (3.3’) (included)
3 x 1.5V AA / approximately 1500 hours of continuous use
150 x 80 x 36 mm (5.9 x 3.1 x 1.4”)
245 g (8.6 oz)
Conductivity Measurement
Testers
HI 73311
Graphite
electrode
cartridge!
The DiST®5 and DiST®6
include features such as
waterproof casing plus 100%
buoyancy, adjustable TDS
ratio, temperature in °C and
°F, adjustable ß, Automatic
shut-off
and
automatic
calibration.
This tester in unmatched in
EC/TDS/T° measurement!
•
•
•
•
•
•
•
Adjustable TDS ratio
Adjustable ß
Automatic shut-off
User adjustable
TDS ratio
Battery life
percentage illuminated
SPECIFICATIONS
Range
EC
TDS
T°
Resolution
EC
TDS
T°
Accuracy
EC
TDS
T°
EC/TDS Calibration
EC/TDS Conv. Factor
Temp. Comp.
Battery Life
Dimensions
Weight
DIST®5 - HI 98311
DIST®6 - HI 98312
0 to 3999 µS/cm
0.00 to 20.00 mS/cm
0 to 2000 ppm
0.00 to 10.00 ppt
0.0 to 60.0°C (32.0 to 140.0°F)
1 µS/cm
0.01 mS/cm
1 ppm
0.01 ppt
0.1°C (0.1°F)
± 2% F.S.
± 2% F.S.
± 0.5°C (± 1°F)
Automatic 1 point
Adjustable from 0.45 to 1.00
Automatic, ß is adjustable from 0.0 to 2.4 %/°C
4 x 1.5 V with BEPS
approx. 100 hours continuous use
Auto shut-off after 8 minutes of non-use
163 x 40 x 26 mm (6.4 x 1.6 x 1”)
85 g (3.0 oz)
pNa
INFO
Portable Sodium tester
What is TDS ?
The pNa tester is the most economical and reliable
way to determine sodium levels in soil. Sodium in the
irrigation water can be caused by underground
deposits, road salt leaching or saline soils. High levels
of sodium can cause poor aeration and decrease the
ability of the plant to take nutrients.
Total Dissolved Solids (TDS) is
defined as the amount of solids
dissolved in a solution.
DiST®
Economical EC and TDS
testers with ATC
This DiST family of testers
utilize a graphite sensor
interface
for
greater
accuracy and external
temperature sensor for
quicker more stable readings. The DiST features a
large LCD, BEPS (Battery
Error Prevention System)
and rugged housing for
longer life.
•
•
•
•
•
Graphite sSensor
Quick accurate readings
Large LCD
Rugged housing
DiST®1 TDS ratio= 0.5
•
•
•
SPECIFICATIONS
Range
Resolution
Accuracy
Calibration solution
Calibration
Temp. Comp.
Battery Life
Dimensions
Weight
Cloth junction reference
Rugged body
pNa determination
graph included
DIST®1 - HI 98301
0 to 1999 ppm (mg/l)
1 ppm (mg/l)
HI 70032/HI 70442
SPECIFICATIONS
Range
Resolution
Accuracy
Calibration
Battery Life
Dimensions
Weight
pNa - HI 98202
0.0 to 3.0 pNa (23 to 0.023 g/l of Na+)
0.1 pNa
± 0.2 pNa
Manual 1 point through trimmer
175 x 41 x 23 mm (7.9 x 1.8 x 1”)
78 g (2.7 oz)
DIST®2 - HI 98302
DIST®3 - HI 98303
0.00 to 10.00 ppt (g/l)
0 to 1999 µS/cm
0.01 ppt (g/l)
1 µS/cm
± 2% F.S.
HI 70038P
HI 70031P
Automatic from 0 to 50°C (32 to 122°F)
4 x 1.5 V, approx. 150 hours continuous use
175 x 41 x 23 mm (7.9 x 1.8 x 1”)
78 g (2.7 oz)
DIST®4 - HI 98304
0.00 to 19.99 mS/cm
0.01 mS/cm
HI 70039P/HI 70030P
8
Testers
SALINTEST
SPECIFICATIONS
SALINTEST - HI 98203
Range
0.00 to 1.00 pNaCl (58.4 to 5.84 g/l of NaCl)
Resolution
0.01 pNaCl
Accuracy
± 0.02 pNaCl
Typical EMC deviation
± 0.04 pNaCl
Calibration
Battery Life
4 x 1.5 V/approx. 500 hours continuous use
Dimensions
175 x 41 x 23 mm (7.9 x 1.8 x 1”)
Weight
78 g (2.7 oz)
Measure the salt content of water
Worldwide fish farming has made great strides in the past two decades with
aquaculture becoming a prime source for quality seafood in an ever growing
industry. As the methods and products keep changing, one crucial factor remains
the same: the salinity of the water. The main component of salt in seawater is
sodium chloride. The SALINTEST can help you monitor the concentration of
sodium chloride assuring high quality in aquaculture. SALINTEST is also ideal
for marine fish tanks and aquariums. Instruments for measuring salinity of
seawater currently available on the market are cumbersome and difficult to use.
Hanna has re-engineered this compact salt tester with a more durable,
ergonomic casing and a larger LCD. Besides applications in aquaculture,
SALINTEST is also ideal for checking salt concentrations in live fish storage
tanks, tropical fish aquariums, refrigerated storage and oceanographic
investigation.
•
•
•
•
Perfect for marine fish tanks and tropical aquariums
Highly portable for easy use around aquaculture installations
A rugged addition to your marine toolkit for oceanographic study
The large LCD allows quick and easy readings when checking
seafood storage tanks
AquaDip®
TDS 601
Rugged waterproof TDS/T° meter
with 2 year warranty
Low cost TDS meter with Automatic Temperature Compensation
SPECIFICATIONS
Range
Resolution
Accuracy
Typical EMC Deviation
TDS Factor
Temperature Comp.
Battery Life
Dimensions
Weight
TDS 601
0 to 1990 ppm (mg/l)
10 ppm
± 2% F.S.
± 2% F.S.
0.5
HI 70032P (optional)
4 x 1.4 V alkaline/Approx.
150 hours of continuous use
150 x 30 x 24 mm (5.9 x 1.2 x 0.9”)
85 g (3 oz)
•
•
•
•
•
•
Low maintenance
No calibration
Long stem for mixing
Robust
Easy to use
Auto shut-off after 5 minutes
SPECIFICATIONS
Range
TDS
T°
Resolution
TDS
T°
Accuracy
TDS
T°
TDS Factor
Calibration
Temperature Comp.
Battery Life
Dimensions
AquaDip® - HI 983310
0 to 1999 ppm
0.0 to 60.0°C
1 ppm
0.1°C
± 2% F.S.
± 0.5°C
0.5
Factory calibrated
Automatic from 0 to 60°C = 2%/°C
2 x 1.5 V AAA alkaline
92 x 38 x 450 mm (3.6 x 1.5 x 17.7”)
PWT
Pure Water Test
Pure Water Test (PWT) enables you to check the purity of your
distilled or demineralized water in laboratory or industrial
environments. PWT is ideally suited for fields such as Printed
Circuit Board washing, laundry, steam cleaning, checking car
battery water and all areas where distilled, demineralized or pure
water is used.
•
•
9
Pure Water Test
Filtration systems in maple syrup production can save boiling
costs by removing sugar first. Verifying the condition of
membranes can be done efficiently with the PWT.
SPECIFICATIONS
PWT - HI 98308
Range
0.0 to 99.9 µS/cm
Resolution
0.1 µS/cm
Accuracy
± 2% F.S.
Typical EMC deviation
± 2% F.S.
Calibration
Battery Life
4 x 1.5 V/approx. 250 hours continuous use
Dimensions
175 x 41 x 23 mm (7.9 x 1.8 x 1”)
Weight
78 g (2.7 oz)
Monitors
EC & TDS monitors with large LCD
•
•
•
•
•
SPECIFICATIONS
Range
Resolution
Accuracy
Calibration
Waterproof
Rugged housing
Large LCD
High accuracy
12 VDC power supply
The popular Gro’Chek EC/TDS monitor has been upgraded with a larger,
easy-to-read LCD. Plus the waterproof casing guarantees operation after
accidental water exposure. High humidity in greenhouses is not a threat to
this rugged monitor. The professional probe gives you accurate results
every time.
TDS GRO’CHEK - HI 983301N
0 to 1999 mg/l (ppm)
10 mg/l
Temperature Comp.
TDS Conv. Factor
Probe included
Power Supply
Dimensions
Weight
0.7
HI 7634 TDS probe
Water-resistant Conductivity and TDS meters
with visual alarm
Water-resistant conductivity/TDS meters are Hanna’s reply to requests
of accurate process monitoring at highly affordable costs and low
maintenance. Each meter is supplied with a direct 2-pin probe and 2
meter (6.6') cable with a ½" thread for in-line mounting. The probe has
a temperature sensor to automatically compensate against
temperature changes from 5 to 50°C (41 to 122°F) with a ß of 2% per
degree. A front trimmer allows manual calibration at 1 point. The
electrical circuitry is tightly sealed inside the water-resistant enclosure.
The 12 VDC power supply allows continuous monitoring over
extended periods of time.
TDS GRO’CHEK - HI 983301N/5
10 mg/l
± 2% F.S.
Manual with one trimmer
EC GRO’CHEK - HI 983302N
0.00 to 9.99 mS/cm
0.01 EC
Automatic from 5 to 50°C (41 to 122°F) with ß = 2%
0.5
HI 7634 TDS probe
86 x 94 x 33 mm (3.3 x 3.7 x 1.3”)
150 g (5.3 oz)
HI 7632 EC probe
SPECIFICATIONS
TDS PRONTO - HI 983306
EC PRONTO - HI 983307
Range
0.00 to 9.99 mS/cm
Resolution
10 ppm
0.01 mS/cm
Accuracy
± 2% F.S.
Calibration
HI 70032P
HI 70039P
Temperature Comp.
Automatic from 5 to 50°C (41 to 122°F) with ß = 2%
Setpoint
200 to 1600 ppm
0.70 to 3.50 mS/cm
Probe
HI 7634/2 TDS probe (included)
HI 7632/2 EC probe (included)
Power Supply
Dimensions
86 x 94 x 33 mm (3.3 x 3.7 x 1.3”)
Weight
150 g (5.3 oz)
10
Monitors
EC/TDS/T° monitors with large backlit LCD
•
•
•
•
•
•
•
These new monitors from Hanna have a large, dual-level, back-lit LCD to give you
instantaneous readings of both EC/TDS and temperature even from a distance. The
waterproof EC/TDS indicators HI 993301 and HI 993302 have been designed to meet the
Grower's need for equipment suited to the aggressive environments found in agricultural
and hydroponics applications. At startup, HI 993301 and HI 993302 perform a self-check to
assure proper working condition. These powerful instruments also feature a stability
indicator and hold feature to prompt the user when to take the reading and freeze the
display for easy and accurate recording. Calibration and temperature compensation is
automatic, while the EC/TDS conversion factor and temperature cœfficient factor (ß) are
user adjustable for application specific measurements.
Waterproof
Combination
EC/tDS/T° probe
Adjustable ß
Extra large display
12 VDC power supply
SPECIFICATIONS
Range
EC
TDS
HI 993301
0 to 3999 µS/cm
0 to 2000 ppm
T°
EC
TDS
T°
Accuracy
EC
TDS
T°
Temp. Compensation
Probe
Power Supply
Dimensions
Weight
HI 993302
0.00 to 20.00 mS/cm
0.00 to 10.00 ppt
0.0 to 60.0°C or 32.0 to 140.0°F
Resolution
1 µS/cm
1 ppm
0.01 mS/cm
0.01 ppt
0.1°C or 0.1°F
± 2% F.S.
± 2% F.S.
± 0.5°C or ± 1°F
Automatic, ß adjustable from 0.0 to 2.4%/°C
HI 7630 EC/TDS probe
165 x 110 x 35 mm (6.5 x 4.3 x 1.3”)
330 g (11.0 oz)
Water
Source
Injector
EC
Acid or Fertilizers
INFO
What is EC ?
Electrical Conductivity (EC) is defined as the ability of a
solution to conduct an electrical current. In aqueous
solutions conductivity is directly proportional to the
concentration of dissolved solids; the higher concentration
of solids, the greater the conductivity.
11
Professional meters
HI 98321 & HI 98322
EC/TDS/Temperature scoop meters
The HI 98321 & HI 98322 portable meters from Hanna are designed for quick and easy, high accuracy EC, TDS and
Temperature measurements. These waterproof instruments have a dual-level LCD that displays EC or TDS and °C or °F.
These microprocessor meters have been developed in direct response to the requests of users in water treatment, water
quality, boilers and cooling towers, reverse osmosis and agrriculture.
Developed for users in
• Agriculture
• Water treatment
• Boilers
• Reverse osmosis
HI 9835
SPECIFICATIONS
Range
EC
TDS
T°
Resolution
EC
TDS
HI 98321
HI 98322
0 to 3999 µS/cm
0.00 to 20.00 mS/cm
0 to 2000 ppm
0.00 to 10.00 ppt
0.0 to 60.0°C or 32.0 to 140.0°F
1 µS/cm
0.01 mS/cm
1 ppm
0.01 ppt
T°
EC
TDS
T°
EC/TDS calibration
EC/TDS Conv. Factor
Temp. Comp.
Battery Life
Dimensions
Weight
0.1°C or 0.1°F
± 2% F.S.
± 2% F.S.
± 0.5°C or ± 1°F
Automatic 1 point at 1413 µS/cm
Automatic 1 point at 12,88 mS/cm
Adjustable from 0.45 to 1.00
ß adjustable from 0.0 to 2.4%/°C
120 x 53 x 81 mm (4.7 x 2.1 x 3.1”)
225 g (7.8 oz)
Accuracy
SPECIFICATIONS
Range
EC
TDS
EC/TDS/NaCl/°C meter
The HI 9835 combines the more important parameters
you need for measuring conductivity. Now you can
sample EC, TDS, NaCl and temperature all at once.
Hanna’s probe design innovation uses 4 rings enhanced
with platinum for greater stability while increasing the
range of measurable concentrations and temperature.
You can choose between automatic and manual
temperature compensation to facilitate your operating
requirements. In addition, you can also select from a
range of TDS factors from 0.40 to 0.80 and a range of
cœfficients 0.00 to 6.00% for greater consistency and
reproducibility. The housing is completely waterproof and
built to survive the harsh conditions of field use. For
extended time studies, this meter can be connected to
the available 12 VDC power supply.
NaCl
T°
Resolution EC
TDS
NaCl
T°
Accuracy EC/TDS/NaCl
T°
Temp. Comp.
Power Supply
Dimensions
Weight
HI 9835
0.00 to 29.99 µS/cm; 30.0 to 299.9 µS/cm; 300 to 2999 µS/cm;
3.00 to 29.99 mS/cm; 30.0 to 200.0 mS/cm; Up to 500.0 mS/cm
0.00 to 14.99 ppm; 15.0 to 149.9 ppm; 150 to 1499 ppm;
1.50 to 14.99 ppt; 15.0 to 100.0 ppt; Up to 400.0 ppt
0.0 to 400.0%
0.0 to 60.0°C
0.01 µS/cm (from 0.00 to 29.99 µS/cm); 0.1 µS/cm (from 30.0 to 299.9 µS/cm);
1 µS/cm (from 300 to 2999 µS/cm); 0.01 mS/cm (from 3.00 to 29.99 mS/cm);
0.1 mS/cm (over 30.0 mS/cm)
0.01 ppm (from 0.00 to 14.99 ppm); 0.1 ppm (from 15.0 to 149.9 ppm);
1 ppm (from 150 to 1499 ppm); 0.01 ppt (from 1.50 to 14.99 ppt);
0.1 ppt (over 15.0 ppt)
0.1%
0.1°C
± 1% of reading
± 0.4°C
Automatic or manual
4 x 1.5 V AA or 12 VDC adapter
196 x 80 x 60 mm (7.7 x 3.1x 2.4”)
500 g (18 oz)
12
Professional meters
HI 993310
Dual-purpose, EC meter for direct measurement in soil and liquids
Since EC (Electroconductivity) is such an effective indicator of nutrient concentration in soil,
irrigation water and fertilizer mixes, the HI 993310 was developed. Now it is possible to use
one instrument to accurately and quickly measure EC in many places where the fertilizer is
found, such as in the irrigation water and directly in the soil. This meter is easy to operate and
gives fast, accurate measurements. Also included in the meter is the ability to measure salt
activity. Comes complete with HI 76304 and HI 76305 interchangeable probes.
SPECIFICATIONS
Range
Resolution
Accuracy
Temp. Comp.
Battery Life
Dimensions
Weight
HI 993310
0.00 to 19.99 mS/cm; 0.00 to 1.00 g/l of salt activity
0.01 mS/cm; 0.01 g/l of salt activity
± 2% F.S. (from 0 - 15.00 mS/cm, excl. probe error)
Automatic
185 x 82 x 45 mm (7.3 x 3.2 x 1.8”)
355 g (13 oz)
•
•
•
•
•
Direct soil and liquid EC measurement
Measures EC in soil, irrigation water and fertilizer mixes
Easy to calibrate and use
Rapid, accurate measurements
Automatic Temperature Compensation
HI 9033 & HI 9034
SPECIFICATIONS
Ranges
Resolution
•
•
•
One probe for many ranges
Waterproof
4 ring probe excels
Accuracy
Calibration
Temp. Comp.
Probe
Battery type/life
Dimensions
Weight
HI 9033
HI 9034
0.0 to 199.9 µS/cm; 0 to 1999 µS/cm;
0.0 to 199.9 mg/l; 0 to 1999 m
0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
0.00 to 19.99 g/l
0.1 µS/cm; 1 µS/cm;
0.1 mg/l; 1 mg/l; 0.01 g/l
0.01 mS/cm; 0.1 mS/cm
± 1% F.S. (excluding probe error)
Manual 1 point with trimmer
Automatic from 10 to 50°C with ß of 2% per degree °C
HI 76302W with ATC, 1 m cable (included)
1 x 9 V / approximately 100 hours of continuos use
196 x 80 x 60 mm (7.7 x 3.1 x 2.4”)
425 g (15 oz); kit: 1.4 kg (3.1 lb.)
Waterproof multirange Conductivity or TDS
Ideal for measuring samples from deionized water to fertilizer stock tanks.
HI 9033 and HI 9034 have been proven time and again to hold up under extended use in wet, humid, dusty and muddy conditions. HI 9033 utilizes a single probe to
perform all conductivity readings in four ranges. This allows the user to measure samples from deionized water to fertilizer concentrate without having to switch or
recalibrate the probe.
HI 9034 measures total dissolved solids (TDS) in three ranges to offer the highest accuracy when performing measurements in diverse applications such as HVAC,
waste water treatment and reverse osmosis. All three ranges can be activated at the touch of a button without having to change the conductivity probe.
Both meters perform measurements with ATC (automatic temperature compensation) which adjusts for the effects of temperature. These portable instruments also
feature BEPS (Battery Error Prevention System) technology that alerts the user when low batteries could affect the readings.
13
Guide for Direct Soil Measurement
HI 99121
Waterproof soil & liquid pH meter
HI 993310
Direct soil & liquid EC meter
GUIDE FOR DIRECT SOIL MEASUREMENT
1) When checking direct soil pH and conductivity, always remember
you will be making a reference between TRUE and SOIL reference
values.
5) The next step is to take the
measurements directly in the soil,
again, following the instructions from
the operators manual.
2) Start by gathering samples of the soil medium and draw a
reference table to record your data.
Note : these readings will be different from
the dilute solution readings due to the
physical properties of the two materials and
the effects on conductivity.
Dilute
Solution
6) Record your measurements on the second line of the pH or
conductivity reference table.
Soil
3) Prepare a dilute solution with each sample (example : 2 parts
distilled water for 1 part soil).
4) Take the measurements of the dilute solutions
with the HI 99121 or the HI 993310, following the
instructions in the operators manual, and record this
data on the first line of the reference table for either
pH or conductivity. Your local agronomist or crop
advisor will help you determine if these values are
correct.
pH
Dilute
Solution
Soil
6.5
6.4
6.5
Dilute
Solution
2.2
Dilute
Solution
6.5
6.4
6.5
Soil
5.9
5.8
5.9
7) During the measurements in soil, always use consistent and
repeatable measuring techniques for analysis.
Example :
- always test at the same time interval after irrigation;
- use same depth in each pot or bag;
- use same distance and depth from drip emitter;
- same medium types.
8) When the chart is complete, you will compare the true and soil
reference values. If there are no large differences between these two
values, you are ready to begin measuring directly in the soil using
only the soil reference values as a target.
EC
or
pH
2.3
2.4
Soil
14
Combined Measurement
Testers & monitors
SPECIFICATIONS
Range
The only tester in the world that measures pH,
Conductivity, TDS and Temperature!
The HI 98129 and HI 98130 Combo waterproof
testers are designed for high accuracy pH, EC/TDS
and temperature measurements.
No more switching between meters, the Combo
from Hanna Instruments, does it all!
HI 73127
Replaceable pH
electrode cartridge!
•
•
•
•
•
•
•
•
High accuracy
Adjustable ß
Automatic shut-off
HI 98129
HI 98130
pH
0.00 to 14.00
0.00 to 14.00
EC
0 to 3999 µS/cm
0.00 to 20.00 mS/cm
TDS
0 to 2000 ppm
0.00 to 10.00 ppt
T°
0.0 to 60.0°C or 32.0 to 140.0°F
Resolution
pH
0.01
0.01
EC
1 µS/cm
0.01 mS/cm
TDS
1 ppm
0.01 ppt
T°
0.1°C or 0.1°F
Accuracy
pH
± 0.05
EC/TDS
± 2% F.S.
T°
± 0.5°C or ± 1°F
Temp. Comp.
pH: Automatic; EC: Automatic: ß adjustable from 0.0 to 2.4%/°C
Battery Life
Dimensions
163 x 40 x 26 mm (6.4 x 1.6 x 1”)
Weight
85 g (3.0 oz)
INFO
Save time and money!
Carry one unit,
perform several tests.
HI 981404N & HI 981405N
pH & TDS or EC continuous monitors
•
•
•
•
SPECIFICATIONS
Range
Resolution
Accuracy
Calibration
Temp. Comp.
TDS conv. Factor
Probes (included)
Power Supply
Dimensions
Weight
15
2 parameters with a single instrument
Advanced electrode technology
Simple operation and maintenance
Supplied complete and ready to use
HI 981404N
HI 981405N
0.0 to 14.0 pH; 0 to 1990 mg/l (ppm)
0.0 to 14.0 pH; 0.00 to 9.99 mS/cm
0.1 pH; 10 mg/l (ppm)
0.1 pH; 0.01 mS/cm
± 0.2 pH; ± 2% F.S.
± 0.2 pH; ± 2% F.S.
Manual at 1 or 2 point (pH)
Manual at 1 or 2 point (pH)
Manual at 1 point (TDS)
Manual at 1 point (EC)
Auto from 5 to 50°C (41 to 122°F) (TDS)
Auto from 5 to 50°C (41 to 122°F) (EC)
0.7 ppm = 1 µS/cm
HI 1286 interchangeable pH electrode
HI 1283 grounding bar with 2 m (6.6’) cable
HI 7634 TDS probe(fixed)
HI 7632 EC probe (fixed)
12 VDC adapter (included)
165 x 110 x 35 mm (6.5 x 4.3 x 1.3”)
300 g (10.6 oz)
HI 981404N and HI 981405N are ideal for agricultural,
horticultural and hydroponics applications where pH
and TDS or pH and EC levels need to be continuously
monitored for optimal plant growth. HI 981404N and
HI 981405N continuously monitor and display the pH
and TDS or pH and EC values of a solution on an easy
to read set of dual LCD's.
The HI 1286 gel filled pH electrode is replaceable and
the BNC connector is protected behind a waterproof
sheath. The unique design of the electrode guarantees
greater clogging resistance in fertilizer solutions with
high concentrations of phosphate, nitrate, etc. TDS
measurements are performed using the 4-4-2
conversion factor of 0.7 so you do not need to convert
the readings.
Both models are equipped with a grounding bar to
ensure more accurate pH measurements and longer
electrode life.
The HI 981404N and HI 981405N are compact and
easy to install and use. This makes them ideal for all
continuous monitoring applications.
Monitors & portables
SPECIFICATIONS
HI 991404
HI 991405
Range
pH
0.00 to 14.00
0.00 to 14.00
EC
0 to 3999 µS/cm
0.00 to 19.99 mS/cm
TDS
0 to 1999 ppm
0.00 to 10.00 ppt
T°
0.0 to 60.0°C or 32.0 to 140.0°F
Resolution
pH
0.01
0.01
EC
1 µS/cm
0.01 mS/cm
TDS
1 ppm
0.01 ppt
T°
0.1 °C or 0.1°F
Accuracy
pH
± 0.05
EC
± 2% F.S.
TDS
± 2% F.S.
T°
± 0.5°C or ± 1°F
Temp. Comp.
EC/TDS
Automatic, ß adjustable for 0.0 to 2.4%/°C
pH
Automatic
Electrode/probe
HI 1293D pH elec. / HI 7630 EC/TDS probe
Power Supply
External 12 VDC
Dimensions
165 x 110 x 35 mm (6.5 x 4.3 x 1.3”)
Weight
300 g (10.6 oz)
HI 991404 & HI 991405
pH/EC/TDS/Temperature monitors
The new Combo Gro’Chek from Hanna
has a dual-level backlit LCD to give
you instantaneous readings of
pH/EC/TDS and Temperature. The
microprocessor provides automatic
calibration, automatic buffer selection
and TDS ratio plus Automatic
Temperature Compensation.
•
•
•
•
•
•
Waterproof
Adjustable ß
Extra large display
12 VDC power supply
Water
Source
HI 9810
Injector
pH Electrode
EC/TDS Electrode
Acid or Fertilizers
Extended range pH/EC/TDS meter
TDS conversion factor= 0.5
HI 9810 is a portable meter for field measurement of pH,
conductivity and TDS in water and solutions. The rugged
housing has been specifically designed to be easy to
use in the plant or in the field while reducing the number
of instruments required for water quality analysis.
HI 9810 measures pH from 0.00 to 14.00 with 0.10
resolution.
HI 9810 measures conductivity from 0 to 3000 mg/l; 0 to
6000 µS/cm. Calibration has been simplified to one
point for both pH and conductivity/TDS modes. The
accuracy of your conductivity and TDS measurements
will not be in question as HI 9810 is equipped with
Automatic Temperature Compensation. No probe
changes are required when switching your measured
parameter between pH, conductivity and TDS. The
specially engineered pH electrode also features a fiber
junction and gel electrolyte for faster response and
reduced contamination. The very economical price of
this meter makes it particularly attractive.
SPECIFICATIONS
Range
Resolution
Accuracy (@20°C/68°F)
EC/TDS Conversion Factor
Calibration
Temp. Compensation
Probe
Battery Type / Life
Environment
Dimensions
Weight
pH
EC
TDS
pH
EC
TDS
pH
EC
TDS
pH
EC
TDS
HI 9810
0.00 to 14.00 pH
0 to 6000 µS/cm
0.10 pH
10 µS/cm
10 mg/l
± 0.20 pH
± 2% F.S.
± 2% F.S.
± 0.10 pH
± 2% F.S.
± 2% F.S.
0.5 mg/l = 1 µS/cm
Manual 1 point through trimmer for all parameters
Automatic from 0 to 50°C (32 to 122°F) with ß of 2% /°C (EC/TDS only)
HI 1285 pH/EC/TDS/°C probe and 1 m (3.3’) cable (included)
1 x 9 V / approximately 150 hours of use
0 to 50°C (32 to 122°F); RH 95%
185 x 82 x 45 mm (7.3 x 3.2 x 1.8”)
520 g (1.1 lb)
16
Portables
HI 9811-0 & HI 9811-5
•
•
•
New features
T° measurement on HI 9811-5 model
Water resistant body
SPECIFICATIONS
Range
•
•
Slim version
TDS conversion factor = 0.5
pH/EC/TDS measurements in one meter
HI 9811 is a portable meter for field measurement of pH, conductivity and TDS in
agriculture. This meter is ideal for crops with a higher conductivity requirements.
The HI 9811 measures pH from 0 to 14 with 0.1 resolution. The HI 9811 measures
conductivity from 0.00 to 6.00 mS/cm and TDS from 0.00 to 3.00 g/l both in
hundredths of units. The accuracy of your conductivity and TDS measurements will
not be in question as the HI 9811 is equipped with Automatic Temperature
Compensation. In addition, the BEPS (Battery Error Prevention System) will alert
the user when low batteries could affect the readings. These portable meters use
the newly designed replaceable HI 1285 probe. Probe changes are no longer
required when switching your measured parameter between pH,
conductivity and TDS.
pH
EC
TDS
T°
Resolution
pH
EC
TDS
T°
Accuracy
pH
EC/TDS
T°
TDS conversion factor
Calibration
Temp. Compensation
Probes included
Battery type/life
Dimensions
Weight
HI 9811-0
HI 9811-5
0.0 to 14.0
0 to 6000 µS/cm
0 to 3000 mg/l (ppt)
-
0.0 to 70.0°C
0.1
10 µS/cm
10 mg/l
-
0.1°C
± 0.1
± 2% F.S.
-
± 0.5°C
0.5
Automatic from 0 to 50°C with ß of 2%/°C (EC/TDS only)
HI 1285-0
HI 1285-5
1 x 9 V alkaline, approx. 150 hours of continuous use
165 x 75 x 45 mm (6.5 x 3.0 x 1.8”)
250 g (8.8 oz)
HI 9813 series
pH/EC/TDS/°C meters
This multi-parameter instrument tests for 3 of the most important factors in the growing
environment. Calibration is quick and easy with calibration dials. Accuracy is ensured with
Automatic Temperature Compensation and the advanced sensor which completely
eliminates polarization and oxidation problems. Comes complete with probe.
SPECIFICATIONS
HI 9813
Range
pH
0.0 to 14.0
EC
0.00 to 4.00 mS/cm
TDS
0 to 1999 ppm
T°
Resolution
pH
0.1
EC
0.01 mS/cm
TDS
1 ppm
T°
Accuracy
pH
± 0.1
EC/TDS
± 0.2% F.S.
T°
Temp. Comp.
Automatic from 0 to 50°C
TDS conversion factor
Variable, 0.56 to 0.72
Probes included
HI 1285-0 pH/EC/TDS probe
Battery Life
Dimensions
165 x 75 x 45 mm (6.5 x 3.0 x 1.8”)
Weight
250 g (8.8 oz)
17
HI 9813-5
0.0 to 14.0
0.00 to 4.00 mS/cm
0 to 1999 ppm
0.0 to 60.0°C
0.1
0.01 mS/cm
1 ppm
0.1°C
± 0.1
± 0.2% F.S.
± 0.5°C
HI 1285-5 pH/EC/TDS/°C probe
165 x 75 x 45 mm (6.5 x 3.0 x 1.8”)
250 g (8.8 oz)
HI 9813-6
0.0 to 14.0
0.00 to 4.00 mS/cm
0 to 1999 ppm
0.0 to 60.0°C
0.1
0.01 mS/cm
1 ppm
0.1°C
± 0.1
± 0.2% F.S.
± 0.5°C
HI 1285-5 pH/EC/TDS/°C probe (Cal Check)
165 x 75 x 45 mm (6.5 x 3.0 x 1.8”)
250 g (8.8 oz)
•
•
•
•
•
•
•
All new features
Conversion factor adjustable
(0.5 - 0.7)
3 Meters in 1
Fast response probe
Easy to calibrate
Automatic Temperature
Compensation
Water resistant body
Portables
HI 991300 & HI 991301
pH/EC/TDS/Temperature megameter
4 in 1 meter with waterproof casing
Theses multi-parameter instruments test 4 of the most important factors in the growing environment. Calibration is
performed at the touch of a button with memorized pH and EC buffers. Accuracy is ensured with Automatic
Temperature Compensation and the advanced sensor which completely eliminates polarization and oxidation
problems. Beta factor and TDS ratio are user-selectable as is the ability to read in °C or °F. The HI 991300 &
HI 991301 come complete with probe and carrying case.
SPECIFICATIONS
Range
pH
EC
TDS
T°
Resolution
pH
EC
TDS
HI 991300
HI 991301
0.00 to 14.00
0 to 3999 µS/cm
0 to 2000 ppm
0.00 to 20.00 mS/cm
0.00 to 10.00 ppt
0.0 to 60.0°C or 32.0 to 140.0°F
0.01
1 µS/cm
1 ppm
0.01 mS/cm
0.01 ppt
0.1°C or 0.1°F
± 0.1
± 2% F.S.
± 2% F.S.
± 0.5°C or ± 1°F
EC/TDS ratio
Selectable from 0.45 to 1.00 (0.50 default); step is of 0.01 unit
pH calibration
Automatic 1 or 2 points with 2 sets of memorized standard buffers (pH 4.01, 7.01,10.01 or 4.01, 6.86, 9.18)
EC/TDS calibration
Automatic 1 point at 1382 ppm;
Automatic 1 polnt at 6.44 ppt;
(conv.=0.5); 1500 ppm (conv.=0.7); 1413 µS/cm (others)
(conv.=0.5); 9.02 ppt (conv.=0.7) 12880 µS/cm (others)
Temp. Comp.
pH
EC/TDS
Automatic from 0 to 60°C with a selectable ß from 0.0 to 2.4%/°C (1.9 default); step is 0.1 unit
Probe included
HI 1288 pH/EC/TDS probe with built-in temperature sensor, DIN connector and 1 m (3.3’) cable
Battery type/Life
4 x 1.5 V AAA / approx. 500 hours of continuous use
Dimensions
143 x 80 x 38 mm (5.6 x 3.1 x 1.5”)
Weight
320 g (11.3 oz)
Accuracy
T°
pH
EC
TDS
T°
INFO
Soluble salts
Measuring soluble salts provides a general
indication of nutrient deficiency or excess. Excess
soluble salts are very common and generally results from
too much fertilizer in relation to the plant’s needs, but
inadequate watering and leaching or poor drainage are
other causes. Sometimes high soluble salt levels occur
when root function is impaired by disease or physical
damage. Always check the physical condition of the
root system when sampling soil for testing.
18
Direction for Field Preparations of Soil Samples
Nutrient Analysis
PREPARING A SOIL SAMPLE FOR ANALYSIS
There are several methods available to obtain a soil sample for measurement. The objective is to find a method you can use that will give you
consistent results. Below we have indicated one method commonly used in agriculture.
In all cases, the goal is to prepare a sample which is as clean as possible. Any coloration or turbididty in the samples will adversely affect the ability of
the unit to give an accurate reading.
2 : 1 Ratio method
+
=
Step 1. Take a sample of soil and mix it with distilled water, 85 g (3 oz) of soil with 170 g (6 oz) of distilled water.
Then let the mixture stand for approximately 30 minutes in order to stabilize.
Step 2. Filter the solution with a medium filter (C 0002-12.5) through a funnel into a clean cup. If the filtrate is not
clear, run through a clean filter again until you have a translucent solution.
Step 3. If your solution is not translucent, use the Activated Charcoal included in the kit, mix with the solution, and
filter one more time. This should give you a translucent liquid, and you will be ready to begin your analysis
procedures. Ideally, you should filter enough of the solution to have an end result of 50 ml of liquid.
Step 4. Follow the instructions in the operators manual provided with your meter to mix and measure your
samples to determine the analysis of the parameter you are measuring.
19
Dissolved Oxygen Measurement
Meters
HI 93732N
•
•
•
•
Lifetime light source
Maintenance free
Easy to operate
Cost effective
SPECIFICATIONS
HI 93732N
Range
0.0 to 10.0 mg/l (ppm)
Resolution
0.1 mg/l
± 0.2 mg/l ± 3% of reading
± 0.1 mg/l
Light Source
Light Emitting Diode @ 430 nm
Light Life
Life of the instrument
Light Detector
Silicon Photocell
Battery Type / Life
1 x 9 V / approx. 40 hours of continuous use. Auto shut-off after 10 minutes of non-use
Environment
0 to 50°C (32 to 122°F); RH 95%
Dimensions
180 x 83 x 46 mm (7.1 x 3.3 x 1.8”)
Weight
290 g (10 oz)
Method
Modified Winkler method. The reaction between Dissolved Oxygen and
the reagent causes a yellow tint in the sample.
The Hanna HI 93732N utilizes a sophisticated custom microprocessor and a modified Winkler method to measure dissolved oxygen accurately and quickly. Measurements
are made in a few short steps that can be performed by technical and non-technical operators alike. In fact, all you need to do is insert a cuvet containing your sample
into the meter and press ZERO. This will calibrate the meter to your sample in seconds. Then add a few drops of the reagents to the sample to generate a color whose
intensity depends on the D.O. content. Place the reacted sample back in the meter and the instrument will do the rest of the work for you! HI 93732N will display the D.O.
concentration in tenths of ppm in clear digits and on a large LCD. No need to worry about temperature changes, membrane status or salinity variations. Ease of use and
accuracy are not the only qualities of the Hanna HI 93732N. In fact, you will be pleasantly surprised to know that HI 93732N with all its benefits is priced at a fraction of
the conventional D.O. meters on the market.
HI 9142
•
•
INFO
Waterproof
Simple to use
Waterproof Dissolved Oxygen meter
for field use
HI 9142 is a rugged, waterproof meter
that solves the common problems of field
use. It is very simple to use: calibration is
performed with HI 7040 zero oxygen
solution while 100% calibration is done in
the air. The polarographic probe (HI 76407/4)
will take accurate measurements to 0.3 ppm in minutes and is supplied
with a 4 m (13') cable that allows measurements to be taken even in
hard to reach places. For applications that require longer probe
cables, the HI 76407/10 and HI 76407/20 probes with a 10 m (33') or
20 m (67') cable are available. The conic shape of the probe allows it
to be used in BOD5 measurements making it a truly versatile
instrument.
SPECIFICATIONS
HI 9042
Range
0.0 to 19.9 mg/l (ppm)
Resolution
0.1 mg/l
Accuracy
± 1.5% F.S.
Calibration
Manual 1 or 2 points (zero & slope)
Temp. Comp.
Automatic
Battery Life
Approx. 500 hours continuous use.
Dimensions
196 x 80 x 60 mm (7.7 x 3.1 x 2.4”)
Weight
425 g (15 oz)
Measuring Dissolved Oxygen
Oxygen meters are used to determine the quantity of dissolved oxygen
in liquids. Two measurement scales are commonly utilized: parts per
million (ppm); or the percentage saturation (%), which is defined as the
percentage of oxygen dissolved in 1 liter of water. It is necessary to
determine the quantity of dissolved oxygen present in water because it
is an indicator of water quality. It is therefore important to monitor civil
and industrial waste water where low concentrations indicate pollution.
Applications
Oxygen meters are used for measuring and monitoring the oxygen
content at the various points in the water circuit of steam boiler
installations. Another application of oxygen meters is in the prevention of
metal corrosion, such as in heating systems, where one of the
factors affecting the rate of corrosion is the percentage of oxygen present.
Another very important application is in fish farming and hydroponics,
where oxygen levels should be continuously monitored both to attain
optimal reproduction and growth, and to prevent high mortality caused
by low oxygen. Nuclear power stations are also suitable for oxygen
measurement of their heavy water.
20
Dissolved Oxygen Measurement
Meters
HI 8043
•
•
Low battery indicator
Temperature compensation
circuitry
The HI 8043 is a versatile D.O. meter
developed for use in the school laboratory.
A common 9 volt battery supplies the unit
with up to 100 hours of continuous power
making it truly portable. There is also a low
battery warning that helps eliminate the
possibility of taking an erroneous reading
due to low power. The simplicity of this meter
is its greatest asset. Simply select the O2
mode and the polarographic probe will
supply you with accurate dissolved oxygen
measurements in mg/l. Switch the dial to °C
to show the temperature readings. The STB
mode is particularly useful to keep the
current flowing through the probe which is
continuously polarized and ready for use.
HI 91410
HI 91410 is a portable, printing D.O.
meters designed for continuous
monitoring and recording at
selectable time intervals. The lowpower printer uses regular paper that
is easily sourced and will not fade
over time. HI 91410 combines
printing functions with the capability
to log measurements. In addition to
supplying the user with instant printouts of D.O., it also provides
datalogging facilities that will store up
to 8000 readings. These measurements can be scrolled through at any time, printed or even transferred
to a computer system by the optional HI 9200 infrared transmitter. This
infrared connection is important in humid environments where a standard RS232 plug on a meter could become damaged. The meter
automatically compensates for two very important parameters: altitude
from 0 to 1900 meters (6230') and salinity from 0 to 40 g/l.
SPECIFICATIONS
Range
Resolution
Accuracy
Calibration
Temp. Comp.
Altitude Comp.
Salinity Comp.
Battery Life
Dimensions
Weight
21
HI 9143
0.00 to 45.00 mg/l O2; 0.0 to 300.0 % saturation O2
0.0 to 50°C
0.01 mg/l O2; 0.1 % saturation O2; 0.1°C
± 1.5% F.S. mg/l O2;
± 1.5% F.S. % saturation O2; ± 0.5°C
Automatic in air at 100%
Automatic
0 to 1900 m (0 to 6230’), 100 m (328’) resolution
0 to 40 g/l; 1 g/l resolution
Approx. 200 hours continuous use.
Socket for 12 VDC power supply
196 x 80 x 60 mm (7.7 x 3.1 x 2.4”)
425 g (15 oz)
SPECIFICATIONS
HI 8043
Range
D.O../°C
0.0 to 19.99 mg/l/0.0 to 50.0°C
Resolution
D.O./°C
0.01 mg/l/0.1°C
Accuracy
D.O.
± 1.5% F.S.
(@20°C/68°F)
°C
± 0.5°C
Typical EMC
D.O.
± 1.5% F.S.
Deviation
°C
± 1°C
Calibration
Manual at 2 points (zero & slope)
Temperature Compensation Automatic from 0 to 30°C (32 to 86°F)
Probe
HI 76401 polarographic D.O. probe with 3 m (10’) cable (included)
Battery Type / Life
1 x 9 V / approximately 100 hours of continuous use
Dimensions
180 x 83 x 40 mm (7.1 x 3.3 x 1.6”)
Weight
370 g (13 oz) with probe
SPECIFICATIONS
Range
HI 91410
0.00 to 19.99 mg/l
0.0 to 50.0
Resolution
0.01 mg/l
0.1
Accuracy
± 1.5% F.S.
(@20°C/68°F)
± 0.5
Calibration
Automatic in air at 100%
Temperature Comp.
Altitude Comp.
0 to 1900 m (0 to 6230’) / 100 m resolution
Salinity Comp.
0 to 40 g/l / 1 g/l resolution
Probe included
HI 76407/4 polarographic D.O. probe with 4 m (13’) cable
Printer
Low power impact type-belt,
14 characters per line using 38 mm plain paper (HI 710034)
Printing & Log. Intervals Selectable from 1, 2, 5, 10, 15, 30, 60, 120 and 180 minutes
Computer Interface
HI 9200 infrared transmitter through RS232 serial port
Power Supply
4 x 1.5V AA batteries; approximately 70 hours of continuous use with rapid
printing interval. Auto shut-off after 4 hours. Power plug for 12 VDC supply.
Dimensions
220 x 82 x 66 mm (8.7 x 3.2 x 2.6”)
Weight
500 g (18 oz); kit: 1.7 kg (3.8 lb)
02
°C
02
°C
02
°C
Waterproof, extended range
Dissolved Oxygen meter.
HI 9143
The HI 9143 is designed for outdoor
applications, especially wastewater treatment
and fish farming. Simple on-site calibration
requires no chemical solutions. Just expose
the probe to air and press the CAL button. In
a few minutes, the meter is calibrated and
ready to use. The HI 9143 measures and
displays O2 from 0 to 300%, 0 to 45 mg/l and
temperature from 0 to 50 °C.
Light Intensity Measurement
Lux meter
HI 97500
Lux meter
Portable Lux Meter for rapid light
measurements in a water resistant
case
The HI 97500 portable Lux Meter from
Hanna Instruments has been designed for
simplicity of use in taking rapid light
measurements.
The HI 97500 is provided with a light
sensor connected by a flexible coaxial
cable which allows remote, stable and
optimum position measurement of light,
without any interference of the operator.
The meter makes it possible to choose
among three measurement ranges by
simply pressing the RANGE key.
• Three measurement ranges
• Light sensor attached
to 1.5 meter coaxial cable
• Rugged, water resistant case
• Low battery indicator
SPECIFICATIONS
Range (KLux)
Resolution (KLux)
Accuracy
Calibration
Sensor
LUX METER - HI 97500
0.001 to 1.999; 0.01 to 19.99; 0.1 to 199.9
0.001; 0.01; 0.1
± 6% of reading ± 2 digits
Factory calibrated
Human-Eyes-Response silicon photodiode
with 1.5 m fixed cable
Approx. 200 hours cont. use.
Auto-off after 7 min. of non-use
164 x 76 x 45 mm (6.5 x 3 x 1.8”)
170 g with sensor
Battery Life
Dimensions
Weight
The HI 97500 Lux Meter is housed in a
rugged waterproof case for trouble-free
outdoor measurements.
Plant Light Requirements
Light provides the energy source needed for plants to manufacture food (photosynthesis).
The amount of light is commonly measured in foot-candles (ft-c) or lux. Plants differ
greatly in their light intensity requirements. Indoor plants are often classified by the
amount of light necessary for growth:
Light Intensity
Quality of light is very important in the workplace, schools,
greenhouses, fish farms and public buildings. Too little light
(or luminous intensity) affects the quantity and quality of
performance of both people and crops. Hanna's light meter
uses special optic filters to match the spectral sensitivity of
the human eye.
• Low (minimum 1.1 Klx, .8 to 2.1 preferred for good growth)
• Medium (minimum 1.1 to 1.6 Klx, 2.1 to 5.4 preferred)
Luminous intensity is measured and reported in footcandles (ft-c) or in lux (lx). Light meters are commonly
referred to as lux meters. One lux is equal to one lumen per
square meter and one foot-candle is equal to one lumen
per square foot. To convert measurements use the
following formulae:
• High (minimum 1.6 to 10.8 Klx, 5.4 to 10.8 preferred)
• Very high (minimum 10.8 Klx, 10.8 + preferred)
About 1.1 Klx for 12 hours per day are necessary simply to maintain plant quality for one
year and at least 2.1 Klx for 12 hours per day are necessary for foliage plants to manifest
any benefit from fertilization.
foot-candle = lux x 0.0929
lux = foot-candle x 10.764
While lack of sufficient light results in poor plant growth, too much light can also be
harmful. Shade plants cannot tolerate excessively high light levels. When a plant receives
too much direct light, the leaves bleach or scald, sometimes dying. This often happens
after moving a plant outdoors in direct light. Any changes in light intensity should be
gradual.
Hanna's light measuring sensor is a photo diode that
converts incident light into an electronic signal that is read
and displayed on the meters LCD as Klx which is 1,000 lx.
So multiply the reading by 92.9 to get the measurement in
foot candles.
INFO
Light intensity
Common examples of light intensities
Full moon
Street lighting
Workspace lighting
Surgery lighting
Sunshine
.001 Klx
.01 Klx
.1 - 1 Klx
10 Klx
100 Klx
1 lx
10 lx
100 - 1,000 lx
10,000 lx
100,000 lx
.0929 ft-c
.929 ft-c
9.29 - 92.9 ft-c
929 ft-c
9,290 ft-c
Light measurements are important
to verify the life span of grow
lights, positioning of plants in
greenhouse settings.
22
Nutrient Management
Chemical test kits
Nutrient management
Nutrient management is rapidly becoming one of, if not the most important issue facing agriculture today.
Monitoring all aspects of input and output from farm lands, greenhouse sites and recreational facilities will be
critical for long term operation. Using Hanna Instruments test kits, single or multiple parameter photometers,
makes the monitoring precise, easy and very economic. Each test kit comes with thorough instructions and
everything necessary to perform quick and easy tests.
Ask us to customize a kit tailored to your needs to get the most value for your money.
PARAMETER
Acidity (HI 3820)
RANGE(S)
0-100 mg/l
0-500 mg/l
Alkalinity (HI 3811)
Titration
0-100 mg/l
0-300 mg/l
Alkalinity, Total (HI 38014)
Titration
0-500 gpg
Ammonia (HI 3824)
Colorimetric
0-2.5 mg/l
Boron (HI 38074)
Titration
0-5.0 mg/l
Carbon Dioxide
Titration
0-10.0 mg/l
(HI 3818)
Titration
0-50.0 mg/l
Titration
0-100 mg/l
Chloride (HI 3815)
Titration
0-100 mg/l
0-1000 mg/l
Chloride (HI 38015)
Titration
500-10.000 mg/l
Titration
5.000-100.000 mg/l
Gypsum Requirement &
Titration
GR: 0-213 metric ton /ha
Exchangeable Sodium (HI 38083)
ES: 0-56.4 meq/100g soil
Hardness (HI 3812)
Titration
0-30 mg/l
0-300 mg/l
Hardness (HI 3840)
Titration
0-150 mg/l
Hardness (HI 3841)
Titration
40-500 mg/l
Hardness (HI 3842)
Titration
400-3000 mg/l
Iron & Total Hardness
Colorimetric
Fe: 0-5 mg/l
(HI 3889)
Titration
40-500 mg/l
Iron (HI 3834)
Colorimetric
0-5 mg/l
Nitrate (HI 3874)
Colorimetric
0-50 mg/l
Nitrate, Irrigation Water
Checker Disc
IW: 0-50 mg/l
& Soil (HI 38050)
Checker Disc
Soil: 0-60 mg/l
Nitrite (HI 3873)
Colorimetric
0-1 mg/l
Oxygen, Dissolved
Titration
0-10 mg/l
(HI 3810)
Titration
0-5 mg/l
Ozone (38054)
Checker Disc
0-2.3 mg/l
pH (HI 38058)
Checker Disc
4.0-10.0 pH
Salinity (HI 3835)
Titration
0-40 g/kg
Sodium Absorption Ratio
DiST 4 + test kit
> 0 meq/l
(SAR) (HI 38078)
Calcium+ Magnesium
Zinc, HR
Checker Disc
0-4.0 mg/l
(HI 38076)
Checker Disc
0-20.0 mg/l
HI 3895- Agricultural Multiparameter Test Kit
Nitrogen
Colorimetric
traces, low, med, high
Phosphorous
Colorimetric
Potassium
Turbidimetric
pH
Turbidimetric
from 4 to 9 pH (1 pH increments)
HI 3896- Agricultural Multiparameter Test Kit
Nitrogen
Colorimetric
Phosphorous
Colorimetric
Potassium
Turbidimetric
pH
Turbidimetric
from 4 to 9 pH (1 pH increments)
23
METHOD
Titration
CHEMICAL METHOD
Methyl-orange
Phenolphthalein
Phenolphthalein
Bromophenol blue
Bromophenol blue
Nessler
Boric Acid
Phenolphthalein
Phenolphthalein
Phenolphthalein
Mercuric Nitrate
Mercuric Nitrate
Silver Nitrate
Titration
Calcium Sulfate
Calcium Sulfate
EDTA
EDTA
EDTA
EDTA
EDTA
Phenanthroline
EDTA
Phenanthroline
Cadmium reduction
Cadmium reduction
Cadmium reduction
Sulfanilamide
Modified Winkler
Modified Winkler
DPD
pH indicators
Mercuric nitrate
Titration
# TESTS
WEIGHT
110 total
32 oz (910 g)
110 total
100
25
100
16 oz (460 g)
13 oz (363 g)
6.3 oz (180 g)
27.5 oz (780 g)
110 total
16 oz (460 g)
110 total
16 oz (460 g)
100 total
23.4 oz (664g)
100 total
31 oz (883 g)
100 total
50
50
50
50
50
50
100
16 oz (460 g)
4.2 oz (120 g)
4.2 oz (120 g)
4.2 oz (120 g)
9 oz (260 g)
5 oz (145 g)
5.4 oz (156 g)
100 total
100
36 oz (1026 g)
5.6 oz (160 g)
110 total
100
300
110
32 oz (910 g)
34 oz (966 g)
7.5 oz (215 g)
16 oz (460 g)
100
27.6 oz (785 g)
Zincon
Zincon
100
22.8 oz (647g)
Ned
Ascorbic acid
Tetraphenylborate
pH indicators
10
10
10
10
3.7 oz (105 g)
Ned
Ascorbic acid
Tetraphenylborate
pH indicators
25
25
25
25
23.3 oz (660 g)
Nutrient Management
Single/dual parameter Ion Specific Meters
Single or Dual Parameter Ion Specific Meters
SPECIFICATIONS
TEST
Ammonia (HI 93700) (ER)
Ammonia (HI 93715) (MR)
Ammonia (HI 93733) (HR)
Chlorine, Free & Total (HI 93734)
Copper (HI 93702) (HR)
Iron (HI 93721) (HR)
Manganese (HI 93709) (HR)
Nickel (HI 93740) (LR)
Nitrate (HI 93728)
Nitrite (HI 93708) (HR)
Oxygen, Dissolved (HI 93732N)
Phosphate (HI 93717) (HR)
Phosphorus (HI 93706)
Potassium (HI 93750)
Sulfate (HI 93751)
Zinc (HI 93731)
Calcium and Magnesium
(HI 93752) (HR)
RANGE
0.00-3.00 mg/l
0.00-9.99 mg/l
0.0-50.0 mg/l
0.00-9.99 mg/l (F. & T.)
0.00-5.00 mg/l
0.00-5.00 mg/l
0.0-20.0 mg/l
0.000-1.000 mg/l
0.0-30.0 mg/l
0-150 mg/l
0.0-10.0 mg/l
0.0-30.0 mg/l
0.0-15.0 mg/l
0.00-50.0 mg/l
0-150 mg/l
0.00-3.00 mg/l
0-150 mg/l Mg
0-400 mg/l Ca
METHOD
Nessler/470 nm
Nessler/470 nm
Nessler/470 nm
DPD
Bicinchoninate/555 nm
Phenantroline/470 nm
Periodate Oxidation/555 nm
PAN/555 nm
Cadmium Reduction/555 nm
Ferrous Sulfate
Modified Winkler/430 nm
Amino Acid/470 nm
Amino Acid/470 nm
Turbidimetric
Turbidimetric/470 nm
Zincon
Calmagite
Oxalate
ACCURACY
± 4 mg/l ± 4% of reading
•
•
•
•
•
Lightweight and portable
Quick and simple to use
Long battery life
Lab grade accuracy
Economical tests
INFO
SPECIFICATIONS FOR DUAL AND SINGLE PARAMETER ISMS
Light Source
Light Detector
Silicon Photocell
Battery Life
Approx 40 hours continuous use
Dimensions
180 x 83 x 46 mm (7.1 x 3.3 x 1.8”)
Weight
290 g (10 oz)
PRODUCTS
HI 93733-01 (HR)
HI 93734-01
HI 93702-01 (HR)
HI 93721-01 (HR)
HI 93709-01 (HR)
HI 93740-01 (LR)
HI 93728-01
HI 93708-01 (HR)
HI 93732-01
HI 93717-01 (HR)
HI 93706-01
HI 93750-01
HI 93751-01
HI 93731-01
HI 93752-01 (HR)
mg/l = ppm
LR = Low Range
MR = Medium Range
HR = High Range
nm = nanometers
REAGENTS
Ammonia
Free & total Chlorine
Copper
Iron
Manganese
Nickel
Nitrate
Nitrite
Dissolved Oxygen
Phosphate
Phosphorus
Potassium
Sulfate
Zinc
Magnesium and Calcium
NUMBER OF TESTS
100 tests
100 tests
100 tests
100 tests
100 tests
50 tests
100 tests
100 tests
100 tests
100 tests
100 tests
100 tests
100 tests
100 tests
100 tests
24
Nutrient Management
Grow Master
C 215 - Grow Master
C 215 is a practical instrument made to measure nutrients commonly
present in fertilizer-enriched solutions. This convenient photometer
measures ammonia, phosphorus, nitrate and potassium in three distinct
ranges of low, medium and high concentrations. This way accuracy is
maximized for each nutrient and for every concentration.
Nitrogen, Phosphorus, Potassium
and Ammonia meter
•
•
•
•
•
SPECIFICATIONS
Light Source
Light Detector
Battery Life
Dimensions
Weight
Thanks to the low cost per test and simplicity of the operations, you no
longer need to send off your samples and wait for the results to come
back. Using the C 215, you can test the presence and strength of
nutrients right on the spot. This can translate itself into a substantial
savings and improved yield. C 215 has been engineered to run on
battery power as well as the mains. The C 215 comes complete with a
9-volt battery and a 12 VDC adapter. Add to this the unit’s lightweight
and you have a bench/portable meter that is just at home in the field as
in the horticulturist’s lab.
Accurate
4 Parameters in 1 meter
Three ranges for each parameter
Easy to use
Economical tests
C 215
Silicon Photocell
Approx 40 hours continuous use
230 x 165 x 70 mm (9.0 x 6.5 x 2.8”)
640 g (22.6 oz)
SPECIFICATIONS
TEST
Ammonia LR
Ammonia MR
Ammonia HR
Nitrate LR
Nitrate MR
Nitrate HR
Phosphorus LR
Phosphorus MR
Phosphorus HR
Potassium LR
Potassium MR
Potassium HR
C 215
RANGE
0.0-10.0 mg/l
0.0-50.0 mg/l
0-100 mg/l
0.0-30.0 mg/l
0-150 mg/l
0-300 mg/l
0.0-10.0 mg/l
0.0-50.0 mg/l
0-100 mg/l
0.0-50.0 mg/l
10-250 mg/l
20-500 mg/l
METHOD
Nessler
Nessler
Nessler
Cadmium Reduction
Cadmium Reduction
Cadmium Reduction
Amino Acid
Amino Acid
Amino Acid
Turbidimetric
Turbidimetric
Turbidimetric
ACCURACY
INFO
Plant Nutrition
The three elements that are most needed by plants are nitrogen (N), phosphorous (P) and potassium (K).
This is the reason why they are called macronutrients and should be given to plants.
Nitrogen is indispensable for the plant’s
life and is a key factor in fertilization.
Nitrogen allows the development of the
vegetative activity of the plant, in
particular, causes lengthening of trunks
and sprouts and increases the
production of foliage and fruits. An
excess of nitrogen weakens the plants’
structure creating an unbalanced
relationship between the leaves and the
stalks. In addition, the plant becomes less
resistant to diseases.
25
Phosphorous is an important element in
the composition of DNA and RNA, the
regulators of the energetic exchange
(ATP & ADP), as well as the reserve
substances in seeds and bulbs. It
contributes to the formation of buds,
roots, blooming, and lignification.
A lack of phosphorous results in:
stifling of plant, slow growth, a reduction
of production, smaller fruits and a lower
expansion of the roots.
Even if Potassium is not a constituent of
important compounds, it plays a
remarkable role in many physiological
activities like the control of cellular turgor
and the accumulation of carbohydrates. It
increases the size of fruits, their flavor, as
well as yielding a positive effect on the
color and fragrance of flowers.
Potassium also makes plants more
resistant to disease.
Honey Color Analysis
Analyzer & refractometer
C 221 - Honey color analyzer
The C 221 portable microprocessor analyzer measures the percent light transmittance of
honey compared to analytical reagent grade glycerol. The transmittance value allow
identification of the honey Pfund grade. The instrument directly displays the measurement
result expressed in mm Pfund.
Measurements are made using matched square optical cuvets having a 10 mm light path.
Display codes aid the user in routine operations.
The C 221 features an auto shut-off feature that will turn the instrument off after 10
minutes of non- use.
The companion Honey Refractometer for measuring water content is rugged and simple
to use with easily identifiable radings. This high precision refractometer measures 12 27% water content.
SPECIFICATIONS
Range
Resolution
Accuracy
C 221
0 to 150 mm Pfund
1 mm Pfund
± 2 mm Pfund
Honey color varies naturally in a wide range of tonalities,
ranging from light yellow to amber, dark amber and black in
extreme cases. Sometimes green or red hues may occur.
Color of untreated honey depends on botanical origin: for
this reason color is very important for definition and
commercial classification fo monofloral honeys. Honey
darkens with age, and other changes in color may result
from beekeeper’s interventions and from different ways of
conservation (e.g.: use of old honeycombs, contact with
metals, high temperatures, exposure to light, etc.).
The primary characteristic for commercial honey classification is color. Color classes are expressed in millimeters
(mm) Pfund grades, compared to an analytical grade
Glycerol Standard Reference.
COLOR STANDARDS
Extra White
White
Golden
Light Amber
Dark Amber
Dark
CLASSIFICATION
13 or less
13 to 30
34 to 50
50 to 85
85 to 114
More than 114
26
Maple Syrup Color Analysis
Maple syrup color analyzers
HI 95759 & HI 95760
Maple syrup grading portable meters
The HI 95759 and HI 95760 handheld, portable maple
syrup transmittance analyzers are high precision, USDA
(HI 95759) or Canada Federal and Quebec (HI 95760)
compliant photometers that bring judging “by eye” to an
end. The three-button operation and easy-to-read LCD
makes these meters ideal in the field.
Both meters read in percent transmittance (grades and
equivalent below) and provide a digital readout with a
precision of ± 1%.
•
•
•
•
SPECIFICATIONS
Range
Resolution
Accuracy
Light Source
Dimensions
Weight
User calibration
Display codes
Auto shut-off
Rugged kit included
HANNA MAPLE METERS
0.0 to 100.0% transmittance
0.1% transmittance
± 1% @ 75.0% transmittance
Tungsten lamp with narrow band
interference filter @ 560 nm
180 x 83 x 46 mm (7.1 x 3.3 x 1.8)
290 g (10 oz)
Our new maple meters measure the percent light transmittance of maple
syrup as compared to analytical reagent glycerol. The transmittance value
allows identification of syrup quality class. Measurements are performed
by using matched square optical cuvets having a 10 mm light path.
Display codes aid the user in routine operations.
MAPLE SYRUP GRADE DESIGNATION
United States
Canada
USDA
Federal & Quebec
75.0 to 100.0
60.5 to 74.9
44.0 to 60.4
27.0 to 43.9
Less than 27.0
27
Grade A Light Amber
Grade A Medium Amber
Grade A Dark Amber
Grade B for reprocessing
Substandard No. 3 Dark
No. 1 Extra Light
No. 1 Light Grade A
No. 1 Medium Grade A
No. 2 Amber
Thermometers & Hygrometers
Testers
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery Life
Dimensions
Weight
HI 98601 - Hygrocheck
HYGROCHECK - HI 98601
10.0 to 90.0% RH
0.1% RH
± 3% F.S.
Thin Film Polymer Capacitor (included)
180 x 30 x 15 mm (7.1 x 1.2 x 0.6”)
62 g (2.2 oz)
Relative Humidity Tester
Now the grower can have accurate readings in a pocket sized tester!
The Hygrochecks large LCD can be seen from any angle. Housed in
rugged ABS plastic, the Hygrocheck uses Hanna Instruments Thin
Film Polymer Capacitor Sensor.
• Large LCD
• Pocket sized
• Common sense construction
Checktemp®4 - HI 151 series
•
•
•
Thermometer with folding penetration
thermistor probe
The Checktemp® 4 gives you practical solutions to temperature measurement for food
service. As you unfold the stainless steel
probe, the Checktemp®4 automatically turns
ON and immediately performs a calibration
test. This unique Hanna feature, Cal-Check,
provides you the security of knowing you
have accurate measurements. Cal-Check
lets you know if your battery level is too low
or if your thermometer requires recalibration.
Ergonomic and easy to carry
Large LCD
Cal-Check feature
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery Life
Dimensions
Weight
•
•
Auto shut-off
°C model available
HI 151-00 / HI 151-001
HI 151-01 / HI 151-011
-50 to 220°C
-58.0 to 428°F
0.1°C (-50.0 to 199.9°C)
0.1°F (-58.0 to 199.9°F)
1°C (200 to 220°C)
1°F (200 to 428°F)
± 0.4°C / ± 1% F.S. (outside) ± 0.8°F / ± 1% F.S. (outside)
Stainless steel, penetration 117 x 3.5 mm (6.75 x .187”)
Approx. 25,000 hours continuous use
165 x 50 x 20 mm (6.5 x 2 x 1”)
100 g (3.6 oz)
A Factory Calibration Certificate is available. Ask your sales associate.
INFO
Factory Calibration Certificates
Checktemp®1
Your thermometer will be calibrated
against a NIST standard and a
certificate will be issued.
HI 98510
Thermometer with remote probe
This highly accurate thermometer is equipped
with Hanna’s unique calibration device which
allows the user to ensure that the instrument is
calibrated accurately. The 3-foot cable is ideal
for checking temperature in hard to reach
places.
•
•
•
•
3-foot probe cable
Calibration check feature (Cal-Check)
Long battery life
°C model available
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery Life
Dimensions
Weight
HI 98509 - HI 98511
-50.0 to 150.0°C
0.1°C
HI 98510- HI 98512
-58.0 to 302°F
0.1°F (-58.0 to 199.9°F)
1°F (200 to 302°F)
± 0.3°C, ± 0.5°C (outside)
± 0.5°F, ± 1°F (outside)
Stainless steel with 3-foot cable
106 x 58 x 19 mm (4.2 x 2.2 x 0.7”)
80 g (2.8 oz)
INFO
Hanna’s exclusive
Cal-Check feature
How do you know when
the reading on any thermometer is correct? You
could make an ice point
or slurry. Even then
there could be several
degrees difference in
the real and the
theoretical or perceived
temperatures. With our
exclusive Cal-Check
feature, you do not need
to waste time preparing
for and making these
tests, Cal-Check can do
it for you. You can check
the accuracy and
deviation
of
your
thermometer at any time
during its life. This way,
you are always sure
about the accuracy of
your readings and if
necessary, can manually compensate for any
deviation in calibration.
28
Testers
HI 145 series
Soil thermometer
The HI 145 series was designed to measure soil temperature quickly
and accurately up to depths of 12 inches. Equipped with a calibration
check feature, the user can be assured that each reading is accurate.
The T-shaped design and large LCD make the HI 145 easy to spot
measure or leave in place.
•
•
•
•
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery type / life
Dimensions
Weight
12” stainless probe
5” stainless probe
T-shaped with easy-to-read display
Available with 5” or 12” probe
°C model available
Cal-Check feature
HI 145-00
HI 145-20
HI 145-01
HI 145-30
-50.0 to 220°C
-58.0 to 428°F
0.1°C (-50.0 to 199.9°C), 1°C (200 to 220°C)
0.1°F (-58.0 to 199.9°F), 1°F (200 to 428°F)
± 0.3°C (-20 to 90°C)/± 0.4% F.S. (outside)
± 0.5°F (-4 to 194°F)/± 0.4% F.S. (outside)
5” stainless steel
1 x 1.5V AAA / Approx. 10,000 hours continuous use / Auto shut-off after 8 minutes
92 x 165 x 38 mm (3.6 x 6.5 x 1”)
92 x 340 x 38 mm (3.6 x 13.4 x 1.5”)
65 g (2.4 oz)
Checkfridge
INFO
Plant Stress
Ideal soil temperature is a
constant 70°F for most
plants.You should take
readings during peak
sunlight hours.
Compost Temperature
Maintain a minimum pile
temperature of 131°F for
3 days to destroy weed
seeds or plant pathogens.
Seed Beds
Proper soil temperature
for seed germination
allows for higher sprouting
in seed beds.
29
HI 147
Temperature monitor with magnetic backing & remote
thermistor sensor on a 1 meter cable
HI 147 is the ideal thermometer when you need accurate,
reliable internal temperature monitoring from the outside.
The HI 147 incorporates Hanna’s unique Cal-Check
feature which allows the user to calibrate the
thermometer internally. A low battery warning “ERR” message completes the HI 147’s rich features.
•
•
•
•
Magnetic backing
Cal-Check feature
Large easy-to-read display
°C model available
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery Life
Dimensions
Weight
CHECKFRIDGE - HI 147-00
CHECKFRIDGE - HI 147-01
-50.0 to 150.0°C
-58.0 to 302°F
0.1°C
0.1°F (-20.0 to 199.9°F), 1°F (200 to 302°F)
± 0.3°C (-20 to 90°C)/± 0.5°C (outside)
± 0.5°F (-4 to 194°F)/ ± 1°F (outside)
Stainless steel, 40 x 5 mm (1.5 x .187”), 1 m silicon cable
Approx. 3 years
92 x 36 x 28 mm (3.625 x 1.25 x 1”)
60 g (2.4 oz)
Professional meters
HI 935005S
Compost thermometer
The HI 935005 is a hand-held waterproof thermometer that uses a K-type sensor
together with an advanced microprocessor to deliver accurate temperature
measurement with an extraordinary 1600 hour battery life. The new dual-level LCD
displays current temperature along with the minimum and maximum extremes
achieved during the session. Battery level indication with low battery warning and
error prevention furnishes this meter with advanced battery management functions.
A HOLD button allows the user to record readings. The °C/°F button instantly
switches between the Celsius and Fahrenheit ranges. A wide variety of
interchangeable probes are available to meet specific applications.
• Designed for many types
of boilers and cookers
• 18” adjustable probe
SPECIFICATIONS
Range
Resolution
HI 935005
HI 935005
HI 935005S
-50.0 to 199.9°C (-58.0 to 399.9°F)
200 to 1350°C (400 to 2462°F)
0.1°C (up to 199.9°C) / 1°C (outside) / 0.1°F (up to 399.9°F) / 1°F (outside)
Accuracy
Probe
Battery type / life
Dimensions
Weight
± 0.2% Full Scale, for one year, excluding probe error
18” K-type thermocouple (included)
3 x 1.5V AA / approx. 1600 hours of continuous use.
150 x 80 x 36 mm (5.9 x 3.1 x 1.4”)
235 g (8.3 oz)
HI 766TR2
HI 766SPEA
HI 9053 - HI 9055
•
•
•
•
•
Use: semisolids, liquids.
MAX temperature: 250°C / 482°F
Response time (90% of final value): 10 sec.
Probe length: 1000 mm (39.3”); dia 10 mm (0.4”)
Tube in stainless steel
18 inch K-type thermocouple probe.
Complete with adjustable bracket to
fit in many type of boilers and
cookers. Ideal to use with HI 9053,
HI 9055 & HI 935005S.
• Alarm functions
• HOLD function
• High temperature range
HI 9053 and HI 9055 are microprocessor-based thermocouple
thermometers that supply the user with reliable readings in the
higher temperature ranges. These meters are housed in a rugged
ABS casing that protects them for years. The powerful microprocessor provides several added functions to the performance of
these meters. HI and LO keys allow the user to recall the
highest and lowest readings taken. A MEM HOLD and MR button
makes it possible to freeze a reading on the display, and then recall it
at a later time. The alarm functions can be set at a high and low point
to alert the user in the event of an out-of-range condition. The built-in
acoustic alarm and temperature differentials are valuable features for
all engineering tests and process monitoring. The HI 9053 monitors
temperature on the Centigrade scale and the HI 9055 measures in
the Fahrenheit range.
SPECIFICATIONS
Range
Resolution
Accuracy
Probe
Battery type/life
Dimensions
Weight
HI 9053
HI 9055
-50.0 to 150.0°C
-58.0 to 199.8°F
-50 to 950°C
-58 to 1742°F
0.1°C (-50.0 to 150.0°C)
0.2°F (-58.0 to 199.8°F)
1°C (-50 to 950°C)
1°F (-58 to 1742°F)
± 0.5% F.S. for one year, excluding probe error
K-type thermocouple (optional)
1 x 9V / approx. 500 hours of continuous use
180 x 83 x 40 mm (7.1 x 3.3 x 1.6")
350 g (12.4 oz)
30
Professional meters
SPECIFICATIONS
HI 99550-0
HI 99550-01
Range
-10 to 300°C
-14 to 572°F
Resolution
1°C
1°F
Accuracy
± 2% of reading or ± 2°C (whichever is greater) ± 2% of reading or ± 3°F (whichever is greater)
Emissivity
0.95
Typical Response Time
1 second
Optic Cœfficient
3:1 (ratio of distance to diameter of target)
Battery Type
1 x 9V
Dimensions
143 x 80 x 38 mm (5.6 x 3.2 x 1.5”)
Weight
320 g (11.3 oz)
HI 99550-00 &
HI 99550-01
Infrared radiation emitted from an object depends on its temperature. The Hanna HI 99550 infrared thermometer employs this technology to measure the surface
temperature. Infrared measurements are extremely practical with an instantaneous response time. Another main advantage is the non-intrusive nature of the
measurements. This feature can translate itself into substantial savings in industries where products are sealed or pre-wrapped. In order to measure the
temperature, simply point to the product or the spot and hold down the measurement key. The measured value will be immediately displayed on the LCD. This type
of non-intrusive measurement is also useful when the surface temperature is high, for difficult-to-reach places or due to hygiene requirements. Hanna’s HI 99550 is
designed with a wrist-strap and HOLD function for greater ease of use. The fast response time coupled with these features, makes the Hanna infrared meter
particularly attractive for repetitive tests in the factory or on the production line.
HI 99556-00 & HI 99556-01
HI 93640
2 in 1 infrared /
penetration thermometer
The new dual purpose
HI 99556-00 is ideal for
checking temperatures
everywhere from the
greenhouse to the field.
Spot check with the
infrared probe and get a
closer look with the
thermistor thermometer.
Comes complete with
probe and wrist strap.
SPECIFICATIONS
Range
IR
PROBE
Resolution
IR
PROBE
Accuracy
IR
PROBE
Response Time
Optic IR Cœfficient
MIN Distance
T° Probe
Battery
Dimensions
Weight
31
HI 99556-00
HI 99556-01
-10 to 300°C
14 to 572°F
-40 to 150°C
-40 to 302°F
1°C
1°F
0.1°C
1°F
± 2% reading or ± 2°C
± 2% reading or 3°F
± 0.5°C (-20 to 120°C)
± 1°F (0 to 250°F)
& ± 0.5°C+1% read. (out.) & ± 1°F+1% read. (out.)
1 second
3 : 1 (ratio of distance to diameter of target)
30 mm (1.2”)
HI 765PW (optional)
1 x 9V
143 x 80 x 38 mm (5.6 x 3.1 x 1.5”)
320 g (11.3 oz)
Compact, portable thermo-hygrometer
HI 93640 is a compact, portable and versatile
hygrometer with a convenient wrist-strap so
that you can monitor relative humidity
anywhere. The built-in thin-film capacitance
sensor assures accurate humidity
measurements from 5 to 95% RH with a
resolution of 0.1%. The rubber keypad
protects the keyboard from dust or accidental
splashes.
A sintered cap can be placed on the sensor
shaft for protection in dusty environments. If
fast response is desired, the cap can be
removed. Designed to be operated with just
one hand, the compact housing fits easily into
your palm. This simple-to-use meter is ideal
for the HVAC field.
SPECIFICATIONS
Range
Resolution
Accuracy
Battery Type / Life
Environment
Dimensions
Weight
HI 93640
RH
5.0 to 95.0%
°C
0.0 to 60.0
°F
32 to 140
RH
0.1%
°C
0.1
°F
1
RH
± 2%
°C
± 0.4
°F
± 1 for 1 year, excluding probe error
1 x 9 V / approximately 100 hours of continuous use
0 to 50°C (32 to 122°F); RH 98% non-condensing
190 x 80 x 38 mm (7.5 x 3.1 x 1.5”)
320 g (11.3 oz)
Professional meters
SPECIFICATIONS MODELS WITHOUT HOOK
MODEL
RANGE
HI 140A
-30.0 to 70.0°C (-22.0 to 158.0°F)
HI 140B
-10.0 to 30.0°C (14 to 86°F)
HI 140C
-30.0 to 10.0°C (-22 to 50°F)
HI 140D
20.0 to 60.0°C (68 to 140°F)
HI 140E
-30.0 to -10.0°C (-22 to 14°F)
HI 140F
20.0 to 40.0°C (68 to 104°F)
HI 140G
-5.0 to 15.0°C (23 to 59°F)
MODELS WITH HOOK (MOLDED EYE)
MODEL
RANGE
HI 140AH
-30.0 to 70.0°C (-22.0 to 158.0°F)
HI 140BH
-10.0 to 30.0°C (14 to 86°F)
HI 140CH
-30.0 to 10.0°C (-22 to 50°F)
HI 140DH
20.0 to 60.0°C (68 to 140°F)
HI 140EH
HI 140FH
HI 140GH
•
•
•
•
•
•
-30.0 to -10.0°C (-22 to 14°F)
20.0 to 40.0°C (68 to 104°F)
-5.0 to 15.0°C (23 to 59°F)
HI 140 series
ACCURACY
± 1.5°C/ ± 3°F
± 0.5°C/ ± 1°F
± 0.5°C/ ± 1°F
± 0.5°C/ ± 1°F
± 0.3°C/ ± 0.6°F
± 0.3°C/ ± 0.6°F
± 0.3°C/ ± 0.6°F
HI 140 loggers weight only 150 grams each and
are not much larger than your PC mouse. They
are housed in a smooth, yet tough ABS casing
that is sealed against ingress of dust and water.
HI 140 models are tailor-made with different
temperature ranges to make them more accurate
for your specific needs.
A green LED on the front of the meter will notify
you of the logging status while a red LED serves as an alarm indication when
undesired temperatures have been encountered. HI 140 series can monitor and
store up to 7600 temperatures in nonvolatile memory for downloading and analysis.
With our powerful software running under Windows®, you can select among others,
your own high and low temperature alarm levels, Celsius or Fahrenheit recording,
delayed start and monitoring interval. In addition, you can program each datalogger
with a unique location number for easy identification. Downloading is performed
through infrared lights without requiring cables and connectors–typical dirt-traps to
be avoided at all costs in food applications.
All loggers have the following features: programmable high and low alarm
thresholds, programmable logging interval from 1 minute to 23 hours and 59 min.,
logging delay start selectable from 0 min. to 23 hours and 59 min., programmable
serial and user ID numbers, infrared Bidirectional RS232 optical communication link,
programmable real time clock and 3 x 1.5 AA batteries (included) with approx. life
of 4 years at 25°C.
ACCURACY
± 1.5°C/ ± 3°F
± 0.5°C/ ± 1°F
± 0.5°C/ ± 1°F
± 0.5°C/ ± 1°F
± 0.3°C/ ± 0.6°F
± 0.3°C/ ± 0.6°F
± 0.3°C/ ± 0.6°F
7600 recordings in nonvolatile EEPROM
User-selectable interval from 1 minute to 24 hours
Programmable serial and user ID numbers
Out of range intermittent LED alarm signal
AA batteries providing 4 years of continuous use
Optional cordless transmitter
MODEL
and software programs for Windows®
HI 141A (H)
HI 141B (H)
HI 141C (H)
HI 141D (H)
HI 141E (H)
HI 141 series
LCD
•
•
HI 141F (H)
HI 141G (H)
•
HI 141J (H)
•
SENSOR(S)
1 internal
1 external
1 internal
1 external
1 internal
1 external
2 external
1 internal
1 external
2 external
RANGE
-40.0 to 80.0°C (-40.0 to 175.0°F)
-40.0 to 125.0°C (-40.0 to 257.0°F)
-20.0 to 70.0°C (-4.0 to 158.0°F)
-40.0 to 125.0°C (-40.0 to 257.0°F)
-40.0 to 80.0°C (-40.0 to 175.0°F)
-40.0 to 125.0°C (-40.0 to 257.0°F)
-40.0 to 125.0°C (-40.0 to 257.0°F)
-20.0 to 70.0°C (-4.0 to 158.0°F)
-40.0 to 125.0°C (-40.0 to 257.0°F)
-40.0 to 125.0°C (-40.0 to 257.0°F)
SPECIFICATIONS FOR ALL MODELS
•
•
•
•
•
Countdown until the start of logging
Number of samples taken
Number of samples which have exceeded
the HIGH/LOW alarms
HIGH and LOW temperature values
HIGH and LOW alarm settings
Resolution
Accuracy
Diameter
Height
Weight
0.1°C (-40.0 to 100.0°C); 0.2°C (temp.>100.0°C) / 0.1°F (-40.0 to 190.0°F); 0.3°F (T°. >190.0°F)
± 0.5°C (-40.0 to 0.0 and 70.0 to 100.0°C); ± 0.4°C (0.0 to 70.0°C); ± 1.0°C (T° >100.0°C)
± 1.0°F (-40.0 to 32.0 and 158.0 to 212.0°F); ± 0.8°F (32.0 to 158.0°F); ± 2.0°F (T° > 212.0°F)
86.5 mm (3.4”)
35 mm (1.4”)
150 g (5.54 oz)
The HI 141 series is a family of temperature data loggers with either one or two channels, internal or external temperature sensors, and an optional LCD. External
temperature sensor models feature one or two stainless steel sensors on a 1 meter (3.3') cable for direct insertion. HI 141 can store up to 16,000 temperature
samples in a protected, non-volatile EEPROM memory. The logging interval can be set from once per second up to every 24 hours and logging delay start can be
set anywhere up to 199 hours. The MIN or MAX temperature between logging intervals can also be stored. All of your collected data is tamper-proof and stored into
serial numbered lots. The user interacts with the logger; setting data acquisition parameters or downloading logged data, through an RS232 serial port on a Windows®
PC. The HI 141000 Windows® software supports communication between the logger and the PC through the HI 141001 infrared transmitter. The housing is
waterproof to IP 67 standards and can include a convenient hanging loop (simply add an "H" to the end of the code). A long-life AA lithium battery provides power.
For a typical 1 minute logging interval, your battery will last about 4 years. Hanna's unique Battery Error Protection System (BEPS) signals when it is time to change
the battery and the housing is designed so you can change the battery yourself. The HI 141 series feature a LCD that show immediately the current temperature,
channel and status of the logging sequence according to your programmed instructions
32
Turf Temp
New Turf-Temp 4000 - TT4000
•
•
1, 4, 8 channel data recorder
Logging capacity for temperatures under turf
covers and other external applications
Come with standard
• HI 766F K-type thermocoupe probe
• 30’ of 2 wire conductor cable
• Stainless mounting stand
• NEMA 4X enclosure CSA humidity and dust proof
TURF-TEMP 4000 (TT4000)
The TT4000 takes the guess work out of temperature monitoring
of important turf and other environmental areas in colder climates.
The TT4000 is a miniature, battery powered, stand alone,
thermocouple based recorder, housed in a Nema 4 rated
enclosure, mounted on a stainless steel pedestal.
The unit comes standard with 30 feet of 2 wire conductor cable, a
stainless steel K type probe, and the software to display the log
activity (either chart or graph) of both the probe temperatures and
ambient temperatures. This gives the user all information for
environmental studies, turf protection decisions, and other related
actions. Logging intervals can be programmed from one reading
every 2 seconds to one reading every 12 hours, based on your
needs.
These units come in 4 different models, to measure up to 4
separate areas of a green, sports field, or other area. In addition,
longer 2 wire cables can be ordered for applications where
necessary.
The storage medium is nonvolatile solid state memory, providing
maximum data security even if the battery becomes discharged.
HI 766F - High temperature probe
SPECIFICATIONS
Internal Channel
Temperature Range
Temperature Resolution
Start Time
-40 to 80°C
0.1°C
Software programmable start time.
Up to six months in advance
Real Time Recording
May be used with PC to monitor
and record data in real time
Reading Interval
1 reading every 2 seconds to one reading every 12 hours
Memory
16 383 readings per channel
Operating Environment
-40 to 80°C, 5 to 95% RH non-condensing
INFO
Turf temperature can change dramatically during
the winter and spring seasons. Knowing what is
happening under the protective covers is critical for turf
managers. The new turf temp from Hanna Instruments will log
and record historical and real time data of temperature activity
both; under the protective covers, and the ambient
temperatures around the recorders. This gives the turf
manager another important tool in the job to
maintain perfect playing surfaces.
•
•
•
•
•
33
TURF TEMP
Flexible sheath
MAX temperature: 1100°C / 2000°F
Response time (90% of final value): 4 sec.
Probe length: 255 mm (10”); dia 1.5 mm (0.6”)
Tube in AISI 316 stainless steel (no-handle)
Professional meters
SPECIFICATIONS
Range
Resolution
Accuracy
Typical EMC
Deviation
Probe
Battery Type / Life
Environment
Dimensions
Weight (meter only)
RH
°C
RH
°C
RH
°C
RH
°C
HI 8564
10.0 to 95.0%
0.0 to 60.0°C (32 to 140°F)
0.1%
0.1°C (1°F)
± 2%
± 0.4°C (± 1°F for 1 year, excluding probe error)
± 2%
± 0.5°C (± 1°F)
HI 70601/2 TFPC RH and T° probe with 2 m (6.6’) cable
1 x 9V / approximately 100 hours of continuous use
0 to 50°C (32 to 122°F); RH 98% non-condensing
185 x 82 x 45 mm (7.3 x 3.2 x 1.8”)
315 g (11.1 oz)
HI 8564
•
•
•
Flexible long cable
Quick response time
2 meters in 1
Portable thermo-hygrometer with detachable probe
HI 8564 thermo-hygrometer provides readings with 98% precision in a very short time for both R.H. and temperature. The
detachable R.H. probe is housed in a rugged ABS cylinder with a thin-film polymer humidity sensor and a signal amplifier. A perforated
cap on the probe allows the air to circulate while it protects the sensitive sensor. The standard cable is 2 m long (7'), and a 5 meter
(16.5') version is also available. Specially designed for internal applications such as museums, libraries, computer rooms and
printing facilities. The smooth membrane keyboard has 4 keys that make operation simple and quick. A large LCD displays
readings in easy-to-read digits each with a symbol next to it to identify the operating mode.
HI 9065
SPECIFICATIONS
Range
Resolution
Accuracy
Calibration RH
Probe
Battery Type / Life
Environment
Dimensions (meter only)
Weight (meter only)
RH
°C
RH
°C
RH
°C
RH
°C
°F
HI 9065
5.0 to 95.0%
0.0 to 60.0°C (32 to 140°F)
0.1%
0.1°C (1°F)
± 2%
± 0.4°C (± 1°F for one year, excluding probe error)
± 3%
±2
±4
Through 2 trimmers on RH probe
HI 70605/2 RH with 2 m (7’) cable (included)
4 x 1.5V AA / approx. 500 hours of continuous use
0 to 50°C (32 to 122°F); RH 100%
196 x 80 x 60 mm (7.7 x 3.1 x 2.4”)
425 g (15 oz)
Professional yet simple water-resistant hygrometer
HI 9065 is a heavy-duty hygrometer specially designed for field applications such as HVAC. It is housed in a rugged water-resistant case to provide maximum
protection for the electronics in the field. The Relative Humidity probe houses a thin-film polymer sensor which performs all RH readings to 98% accuracy very
quickly. A "HOLD" key will instantly freeze the reading on the LCD. HI 9065 can also measure temperature with internal sensor of the RH probe from 0 to 60 in the
Celsius as well as 32 to 140 in the Fahrenheit scales.
34
Control Systems
pH & nutrients control
Hydrobox
Automatic pH & fertilizer control system for indoor gardening (hydroponics)
Simple to operate, easy to install, reliability and affordability are just some of the features that make the Hydrobox series a winning product. Now everyone can have
24 hours a day / 7 days a week control over their reservoir, with overdose protection. Free up your time for other activities, and have happy, healthy plants!
•
•
•
•
•
•
Automatic control 24 hours per
day / 7 days a week
Protection against pH or nutrient
overdosing (added security)
Adjustable setpoints
Easy installation, no hardwire
necessary
Affordable
Compact size 6'' x 6'' x 6''
Hydrobox pH
pH controller with visual
alarm, built-in overdose
timer protection.
Hydrobox Deluxe
Automatic pH and nutrient
control (EC or TDS) with
visual alarm and overdose
timer protection.
Hydrobox EC/TDS
Nutrient controller with visual
alarm and overdose timer
protection.
Many models available:
HB/EC
HB/TDS
HB/pH-1001
HB/pH-1006
HB/pH-1286
HBDEL/EC1001
HBDEL/EC1286
HBDEL/TDS1286
Growpal-A & Growpal-F
Grower’s Pal
pH & fertilizer control system for reservoirs.
Versatile. Greenhouse recommanded.
•
•
•
•
•
Easy to set up and install
Easy to use and program
Manual calibration & accurate digital readout
Handy individual calibration solution packets
Auto/off/prime switches for pump control.
No more manual priming
•
•
•
•
Overdose timing protection for fertilizers & acid
Audible, visual & auxiliary alarms
“No flow” detection for recirculation circuit
Waterproof, dustproof & rustproof. 2 year warranty
Grower’s Pal typical installation
F.S.
HI 2222
Sampling circuit
110VAC
EC probe
pH probe
Auxiliary alarm output
110VAC
Recirculating
pump
Dosing
Pumps
HI 3333
Diffuser
to plants
Watering
pump
Acid
35
A
B
Water
Input
Control Systems
Irrigation / fertilization controllers
HI 8001 - F1 Controller
Panel mount irigation/fertilization controller
The HI 8001 F1 Controller is a practical solution to automated irrigation and fertilization control for
up to 32 sectors. Ideal for large fields, greenhouses, hydroponic and soil farms, orchards, public
gardens and golf courses. The F1 Controller is also capable of mixing, agitation and level control,
filter flushing and water pump activation. Control is performed precisely and automatically, from
any distance (requires HI 98143-22), by using both analog and digital signal inputs and outputs,
as well as an RS 232 output for a PC or network interface with custom software.
•
HI 8001-01
HI 8001-02
HI 8001-03
HI 8001-04
Fertilization/irrigation controller for 8 sectors
•
•
•
•
•
•
16 digital inputs for temporary break, conditional stop, irrigation count, differential
pressures and fertilizer, acid, mixing and external tank level controls.
6 analog inputs for pH sensors, EC sensors and solar radiation sensors.
2 non-consent alarm relays.
7 digital outputs for filter back flushing, pH and fertilizer tanks.
Inputs 24 VAC output power supply and 110/220 VAC with grounding (internal power).
PID Control reduces overdosing and large oscillations in the mixing process.
Logging of executed programs with values of all parameters.
Information Center - Splash-proof polyester membrane cover consisting of:
• 4-level LCD used for programming and data presentation.
• 32 Light Emitting Diodes (LED's) for each sector valve.
• 9 LED's for each of the fertilizer tanks, pH control, mixer and filters.
• 2 extra-large LED’s for the alarm and pump functions.
HI 8002
Waterproof wall mount irrigation/fertilization controller.
The HI 8002 includes all the features of the HI 8001 but in a waterproof, NEMA 4X enclosure.
HI 8002-01
HI 8002-02
HI 8002-03
HI 8002-04
NEMA 4, waterproof fertilization/irrigation controller for 8 sectors
36
Control Systems
Irrigation / fertilization controllers
SPECIFICATIONS
Range
pH
EC
Solar Radiation
Resolution
pH
EC
Solar Radiation
Typical Inputs
Typical Outputs
Number of Programs
Priority for Programs
Program Method
Irrigation Capacity
Irrigation Control
Readout
Power Supply
Environment
Dimensions
Weight
Required accessories
HI 8001 & HI 8002 F1 CONTROLLERS
0.0 to 14.0
0.0 to 20.0 mS/cm
0 to 2000 W/m2
0.1 pH / 0.1 mS/cm / 1 W/m2
± 0.0546
± 0.078 mS/cm
± 0.78 W/m2
2 pH electrodes, 3 conductivity probes, solar radiation monitor, 4 fertilizer tanks, 1 acid tank, 5 tank level controls,
1 mixing tank level control, 2 differential pressures, 1 irrigation counter, 1 temporary break, 1 conditional stoppage
2 non-consent alarms, up to 32 sector valves, 2 filter flushing, pump, agitator, 4 fertilizer tank electro-valves, 1 pH tank electro-valve
10
5 levels (1 through 5)
With keypad or through a PC using proprietary software
8, 16, 24 and 32 sector valves
Time/volume control, 1 to 6 different timetables per program, accumulated solar radiation, low tank levels, manually
20-digit, 4 level LCD with graphic symbols and messages
115/220 V; 50/60 Hz
HI 8001: 0 to 50°C (32 to 122°F); max 85% RH non-condensing;
HI 8002: NEMA 4X specifications
178 x 260 x 115 mm (7.1 x 10.4 x 4.6")
HI 8001: 3.4 Kg (7.5 lb.); HI 8002: 280 x 330 x 165 mm (11.2 x 13.2 x 6.6”)
HI 98143-22 pH/EC isolated transmitter, non-sourcing current type with 4-20 mA output (2 required)
F1 typical installation
37
Control Systems
Transmitter & level controller
HI 8666
RH/°C transmitter
panel mounted
The highly accurate
humidity and temperature
transmitter can be mounted
anywhere in the greenhouse to relay temperature
and humidity values via an
analog signal to remote
panel meters or controllers.
•
•
•
SPECIFICATIONS
Range
RH
°C
Resolution
RH
°C
Accuracy
RH
°C
Response Time
Power Supply
(Required)
Dimensions
Weight
Sintered metal cap
4-20 mA output
Dual-range transmitter
HI 8666
0% (4mA) to 100% (20 mA)
-20 (4mA) to 60 (20 mA)
± 0.125%, ± 0.02 mA
± 0.1, ± 0.02 mA
± 2% (5% to 80% RH); ± 4% (80% to 90% RH)
± 1% of span
6 seconds without sintered filter, 60 seconds with filter
12 to 24 VDC for each signal (external not included)
needed at undecal connector (not included)
i.e. the voltage entry point to HI 8666
79 x 49 x 140 mm (3.1 x 1.9 x 5.5”)
200 g (7 oz)
HI 7873
Level controller
HI 7873 is ideal for nutrient
and acid tank level control
over distances of up to
1,000’. This compact controller will prevent one or
more of the nutrient tanks
from running dry, assuring
that the nutrient mix is always
correct.
•
•
•
•
High, low and over
Level indication
Output contact
Compact design
SPECIFICATIONS
Transmission
Connection
Level Adjustment
Level Indication
Sensor Bars
Transmitter
Output Contact
Power Supply
Dimensions
Weight
HI 7873
300 meters (990’) max.
HI 7164 (11 pin connector)
High, low, and overflow
High, low, and overflow
4 pieces (min); HI 731324 pack of 5 pcs (not included)
HI 7874 (not included)
2 relays of 2 A/max. 240 V resistive load 1 000 000 strokes
110/15V; 50/60 Hz
79 x 49 x 95 mm (3.1 x 1.9 x 3.8”)
150 g (5.3 oz)
38
Control Systems
Chemical metering pumps
These simple and reliable diaphragm pumps are composed of high
quality components and incorporate chemical-resistant Teflon® and
Kynar® heads and diaphragms. The Blackstone series of pumps are
positive displacement solenoid driven, using a minimum number of
moving parts, therefore reducing the chance of mechanical failure.
Blackstone pumps
Many models available:
A wide range of Blackstone
pumps with different dosing
capacities are available for
your specific dosing needs.
Each pump is supplied with
the installation kit including
polyethylene tubing, ceramic
weights, injection valve and
suction valve.
Valve/Hose
Assembly Diagram
NECK
Hanna Instruments
Blackstone Series
BL1.5/D
BL1.5/U
BL3/D
BL3/U
BL5/D
BL5/U
BL7/D
BL7/U
BL10/D
BL10/U
BL15/D
BL15/U
BL20/D
BL20/U
220/240V, 1.5 lph (0.4 gph)
110/115V, 1.5 lph (0.4 gph)
220/240V, 2.9 lph (0.8 gph)
110/115V, 2.9 lph (0.8 gph)
220/240V, 5.0 lph (1.3 gph)
110/115V, 5.0 lph (1.3 gph)
220/240V, 7.6 lph (2.0 gph)
110/115V, 7.6 lph (2.0 gph)
220/240V, 10.8 lph (2.9 gph)
110/115V, 10.8 lph (2.9 gph)
220/240V, 15.2 lph (4.0 gph)
110/115V, 15.2 lph (4.0 gph)
220/240V, 18.3 lph (4.8 gph)
110/115V, 18.3 lph (4.8 gph)
Design
Reliable
High quality material
Ideal for dosing nutrients & acids
Part#
With Large Diaphragms
BL 20
BL 15
BL 10
BL 7
Output
LPH
18.3
15.2
10.8
7.6
With Small Diaphragms
BL 5
BL 3
BL 1.5
5.0
2.9
1.5
SPECIFICATIONS
Maximum Capacity
Pump Casing
Pumphead
Fittings
Self-Priming
Power Supply
Max. Absorbed Power
Dimensions
Weight
39
•
•
•
•
Rated Pressure
GPH
BAR
4.8
0.5
4.0
1
2.9
3
2.0
3
1.3
0.8
0.4
7
8
13
PSI
7.3
14.5
43.5
43.5
Strokes/min
120
120
120
120
101.5
116
188.5
120
120
120
BL.../U
BL.../D
See chart above
Fiber-reinforced polypropylene
Pumphead in Kynar®, diaphragm and valve seats
in Teflon®, glass ball valves and O-Rings in Viton®
Polyethylene 5 x 8 mm tubing
Max. self-priming height 5 feet (1.5 m)
110/115 V, 50/60 Hz
220/240 V, 50/60 Hz
Approximately 200 W
165 x 194 x 121 mm (6.5 x 7.6 x 4.8”)
6.6 lb. (3 kg)
Personalyzed Kits & Accessories
MAL 100
HI 740218
Need an extra in it? Need to fit more than one meter? Ask for your
personalized kit and experience the Hanna difference!
All colorimeters can be custom fit into a rugged carrying case for ease of
use and transportation. Pre-cut foam pieces allow the user to easily fit
reagents, cuvets, caps, wiping tissue, etc. Ask us to do it for you, we'll be
glad to get it ready to use when it gets to your door!
Accessories
HI 710007
HI 710008
HI 710009
HI 710010
Blue rubber boot for HI 991001-2-3, HI 991300-01
Orange rubber boot for HI 991001-2-3, HI 991300-01
Blue rubber boot for colorimeters & HI 9810-11-12
Orange rubber boot for colorimeters & HI 9810-11-12
HI 92000
HI 9200
HI 920010/9
Windows® compatible software for portables meters
9-pin infrared transmitter
9 to 9-pin connection cable for HI 98140 - HI 98150
HI 710001
Soft carrying case for colorimeters
HI 731321
HI 731325
HI 731318
Cuvets (4 pcs) for Colorimeters
Caps (4 pcs) for Colorimeters
Tissue (4 pcs) for wiping cuvets
HI 76302W/10
HI 76302W/20
HI 76302W/30
10 m. EC probe for HI 9033-34 & HI 933300-01
HI 76407/10
HI 76407/20
HI 76407/30
10 m. D.O. probe for HI 9143-45 & HI 9141-410
HI 710034
HI 710035
10 paper rolls for portable meters
Ink cartridge for portable meters
HI 93701-00
HI 93701-10
HI 93701-11
HI 93701-25
HI 93701-50
Free Chlorine standard 0 mg/l, 4 pcs
Free Chlorine standard 1 mg/l, 4 pcs
Free Chlorine standards 0, 0.25, 0.5 and
1 mg/l, 1 of each (4 pcs)
Free Chlorine standard 0.25 mg/l, 4 pcs
Free Chlorine standard 0.5 mg/l, 4 pcs
HI 93703-0
HI 93703-10
HI 93703-05
AMCO-EPA cal. solution, 0 NTU, 30 ml for HI 93703
AMCO-EPA cal. solution, 10 NTU, 30 ml for HI 93703
AMCO-EPA cal. solution, 500 FTU, 30 ml for HI 93703-11
HI 76407A/P
Pack of 5 replacement membranes for
HI 9143-45 & HI 9141-410 Dissolved Oxygen meters
Electrolyte solution for Dissolved Oxygen meters, 30 ml
HI 7041S
HI 740218
HI 721317
HI 93703-C
MAL-100
Carrying case for colorimeters and turbidity meters
General carrying case for waterproof & printing/logging
meters
HI 93703 complete kit with case and accessories
Personalized carrying case
40
Calibration & Maintenance Solutions
It is difficult to exaggerate the importance
of buffer and maintenance solutions.
Expensive equipment is often utilized
well below its full capabilities due to lack
of proper maintenance of sensors. With
Hanna solutions, this is no longer a
problem.
4 liter size
Maintenance kit
1 liter size
460 ml size
230 ml size
20 ml size
EC
TDS
pH
Calibration starter kits
41
CODE
HI 7007/1G
HI 7007/1L
HI 7007L
HI 7007M
HI 70007P
DESCRIPTION
pH 7.01 calibration buffer, colored
pH 7.01 calibration buffer
SIZE
4 liter
1 liter
460 ml
230 ml
25 x 20 ml
HI 7004/1G
HI 7004/1L
HI 7004L
HI 7004M
HI 70004P
4 liter
1 liter
460 ml
230 ml
25 x 20 ml
HI PHKIT
pH calibration starter kit
3 x 20 ml (pH 7) + 3 x 20 ml (pH 4)
HI 7061L
HI 7061M
Cleaning solution for pH testers/meters
Cleaning solution for pH testers/meters
460 ml
230 ml
HI 70300L
HI 70300M
Storage solution for pH testers/meters
Storage solution for pH testers/meters
460 ml
230 ml
HI MTNKIT
Maintenance kit (cleaning & storage)
1 x 230 ml (cleaning) + 1 x 230 ml (storage)
CODE
HI 7032L
HI 7032M
HI 70032P
DESCRIPTION
1382 ppm calibration solution, 0.5 conv. factor
SIZE
460 ml
230 ml
25 x 20 ml
HI 70442L
HI 70442M
HI 70442P
460 ml
230 ml
25 x 20 ml
HI TDSKIT
1382 ppm calibration starter kit
5 x 20 ml
CODE
HI 7030L
HI 7030M
HI 70030P
DESCRIPTION
12880 µS/cm calibration solution
SIZE
460 ml
230 ml
25 x 20 ml
HI 7031L
HI 7031M
HI 70031P
1413µS/cm calibration solution
460 ml
230 ml
25 x 20 ml
HI ECHKIT
HI ECLKIT
12880 µS/cm calibration starter kit
1413 µS/cm calibration starter kit
5 x 20 ml
5 x 20 ml
Warranty Policy
Hanna Instruments products are manufactured in our ISO 9001 facilities
meeting the highest quality standards in the industry. Hanna's high standards
also apply should a product be returned due to defects in material or
workmanship. Our extensive warranty extends up to 3 years on some
products.
Limitations : Warranty products may be returned for repair or replacement
only, at the discretion of Hanna Instruments. In some circumstances,
remedy may constitute refund for the price paid for the product.
The warranty period commences from the original date of sale to the
end-user buyer. Warranty is valid only when the product is used under
normal conditions and in accordance with operating limitations and
prescribed maintenance procedures. The express warranty stated
previously is the only express warranty given by Hanna to the end-user
buyer. Hanna expressly disclaims any warranties implied by law, including
but not limited to warranty of merchantability of fitness for a particular
purpose. Hanna shall not be liable for any kind of breach of any warranty,
negligence, on the basis of strict liability or otherwise.
HANNA Instruments agriculture warranty periods are :
3 Years
2 Years
2 Years
2 Years
2 Years
1 Year
1 Year
1 Year
1 Year
6 Months
3 Months
pH 300 bench top meters
Portable meters
Bench meters
Printing meters
Stirrers & industrial meters
Dosing pumps
Waterproof testers
Testers & pocket size Tthermometers
Electrodes & probes
Replacement pH probe HI 73127
pH Checkpak®
42

Hanna Instruments Canada

Transcription

Similar documents

dl-100 black box - Milwaukee Instruments

REAL UV254 PORTAbLE METERs

Home Theater Color Calibration Spyder3TV™ Offers the

Untitled - Global Drilling Support

the esmil approach

corneometer

Wixey

Bovine • Equine • Ovine • Caprine • Porcine - vaucluse

Preoperative Measurements and Intraocular Lens