Splint-It® - Pentron Clinical

Transcription

Splint-It® - Pentron Clinical
Stabilize, Reinforce and Repair with Splint-It®
Resin-Reinforced Fiber Splinting Strips
Splint-It
®
Resin-Reinforced Fiber Splinting Strips
Splint-It Resin-Reinforced Fiber Splinting Strips are designed to streamline
the splinting process by offering a special resin treatment in three unique
fiber designs. The high strength glass and polyethelene fibers are preimpregnated with a special resin ensuring complete saturation within each
strand and eliminating the need to apply bonding agent onto the fiber
strips. The resin-treated fibers provide versatility, in addition to substantial
strength and ease of placement. Splint-It Resin-Reinforced Fiber Splinting
Strips are sure to exhibit exceptional results for you and your patients,
while maintaining efficiency and simplicity.
Clinical indications and uses for Splint-It Resin-Reinforced Fiber Splinting Strips:
> Immobilize periodontically involved teeth
> Retain orthodontically treated teeth
> Strengthen replacement teeth
> Fortify denture repairs
> Reinforce temporary crowns and bridges
Splint-It Resin-Reinforced Fiber Splinting Strips are available in three unique
designs for a variety of stabilization and reinforcement procedures:
Unidirectional Fiber Strip
The 3mm wide
unidirectional glass
fiber strip is ideal for
stabilizing mobile
teeth, repairing
dentures, and
reinforcing
temporary bridges.
Woven Fiber Strip
The 2mm wide
woven glass fiber
strip easily tucks into
interproximal
contacts, adapts
effortlessly to
misaligned teeth,
and stays in place
due to its lack of
memory.
800.551.0283 | 203.265.7397 | www.pentron.com
Braided Rope Strip
The 1mm wide
braided
polyethelene rope is
ideal for use when
lingual space is
limited, and may
also be used as a
post.
Splint-It
®
Resin-Reinforced Fiber
Splinting Strips
Physical Properties
Unidirectional
Glass Fiber (3mm)
Woven Glass
Fiber (2mm)
Braided Polyethelene
Rope Fiber (1mm)
Flexural Strength (MPa)
602 (± 40)
260 (± 15)
180 (± 8)
Flexural Modulus (GPa)
28 (± 3)
12 (± 2)
7 (± 1)
Fiber Content (% weight)
55 (± 5)
50 (± 5)
45 (± 4)
Filament Diameter (mm)
6 - 10
13
23
Ordering Information:
Splint-It Fiber Splinting Strip Refills
(6) 3mm Unidirectional Glass Fiber Splinting Strips
REF N23A
(6) 2mm Woven Glass Fiber Splinting Strips
REF N23B
(6) 1mm Braided Polyethelene Rope Fiber Strips
REF N23C
For more information on our entire line of innovative dental products visit us at
www.pentron.com or call us at 1.800.551.0283
8 0 0 . 551. 0 28 3 | w w w. p e n t r o n . c o m |
FibreKor® Post
|
Build-It® FR™ |
Splint-It®
Crown & Br idge
Impressions
20 3 . 26 5 . 7397
Adhesives
Restoratives
Subject to change or cancellation without notice. Copyright © 2009 Pentron Clinical Technologies, LLC. All rights reserved.
WLT_Rev01