Ademco Vista 20_new

Tips to help you
prevent false alarms:
User Guide for Ademco Vista 20
BEFORE LEAVING THE
PROPERTY
Secure all windows and
doors confine pets to
designated rooms by
keeping doors shut
Fluent Key Strokes Must Be Used In All Procedures Listed Below
ARMING
•
•
•
•
PIN + AWAY(2) or # + 2 Will arm with Entry/Exit delay
PIN + STAY(3) or # + 3 Partial Zones programmed by Tech willl arm
with Entry/Exit delay
PIN + INSTANT(7) Perimeter Armed with Exit delay, NO Entry Delay
PIN + MAXIMUM(4) Will arm without Entry/Exit delay
AT NIGHT
Keep windows and doors
shut in rooms which are
being protected by sensors
confine pets to designated
rooms
DISARMING
•
PIN + OFF(1)
RESETTING CODEPAD
•
PIN + OFF(1)
BYPASSING/ ISOLATING
•
•
PIN + BYPASS(6), then the Zone number required i.e. 01, 04, 18 etc.
When all zones have been selected the display will read through the
zones one by one, to confirm. Display will advise (DISARMED BYPASS
READY TO ARM)
CHANGING CODES
•
Please See Your Team Leader
TESTING COMMUNICATIONS
•
•
PIN + TEST(5) This will send a test signal after the siren has sounded for
2 seconds
PIN + OFF(1) This will exit panel out of Test mode and send a test
restore signal (above is for missed tests)
TROUBLE / FAULT INDICATORS
•
Press the star button (*) The Faulted Zone/s will be displayed.
`
POF AND BOF INDICATORS
•
•
POF - Top right hand corner of keypad will have letters AC for power
on. NO AC for no power
BOF - Right hand side of screen on keypad will have letters BAT for
low system battery
ENSURE
Sensors are not obstructed
by furniture or suspended
objects eg. Festive/party
decorations detectors are
free of insects and
cobwebs
TAKE CARE
Protect sensors when
decorating or doing
building work. If you go
away ensure that your key
holders know how to switch
your alarm off
HOW TO CANCEL FALSE
ALARMS
Your password/voice code
if ADT needs to verify an
alarm inform ADT Security
of the dates you’ll be away
TECHNICIANS TIPS
•
•
When testing an RF System the customer needs to stand in an
unprotected area for 90 seconds before testing zones
One short beep every 40 seconds means system is in test mode
Contact Us
131 005
www.adtsecurity.com.au
38 South Street,
Rydalmere NSW 2116