Acu-Rite VUE 2 Axis Display Console

Technical Information
Authorised Distributor of:
Part No: DRO-VUE-2
Doc V: 1.1
VUE 2 axis Display Technical
Authorised Distributor of:
Authorised Distri
Acu-Rite VUE 2 Axis Display Console
®
DIGITAL READOUTS
Authorised Distri
•2 axis console with user selectable mode for milling, turning and grinding.
•The position display unit has a robust housing and a splash-proof membrane keyboard.
•Functions include; PCD, line of holes, radius/diameter display, axis summing, vectoring.
•USB interface enables the display unit to transfer measured values and import or export
parameters and tables.
•3-Year Hassle-Free Warranty. (Terms and conditions apply)
Specifications
Display type
5.7” monochrome flat-panel display
Case material
-
Keypad type
-
Encoder types
Linear or Rotary
Encoder input
5v TTL 90º quadrature phase difference (RS232)
Linear resolution settings
1mm to 0.0001mm
Storage temperature
-20°C ~ +70°C
Operating temperature
0°C ~ +45°C
Relative humidity
20% to 85% Non-condensing
Operating voltage
100 to 240V AC (50/60 Hz)
Weight
2.6 Kg
www.machine-dro.co.uk - Allendale Electronics Ltd, Pindar Road, Hoddesdon, Hertfordshire. EN11 0BZ.
Images & Content ©2010 Allendale Electronics Limited. E&OE - Specifications subject to change without prior notice.
+44 (0)1992 450780
2
machine-dro.co.uk
Specifications
Axis input
1 OF 3
®
Functions
Generic Functions
mm/inch
Metric/imperial display. Convert you’re machine from metric to
imperial and vice-versa at the touch of a button
Absolute/incremental
Display position to the user-defined datum (absolute)
Display new position relative to the previous position (incremental)
Additional zero datum
memory
Store up to 10 sub datum zero positions in the internal memory
Centre find
Calculates half the distance between two selected points
Zero approach indication
On screen warning of "Distance-to-Go".
Job timer
Shows hours, minutes, seconds. Operates like a stop watch.
Password protected mode
Optional password protection on saved parameter
Calculator
Calculator functions for standard math, trigonometry, RPM, and
taper (Turning only) functions
Angular axis configuration
Linear or Angular display on any axis
Scale Factor
Can be used to scale the part up or down.
Linear Error compensation
Linear or Segmented
REF evaluation
Distance coded reference mark input
On screen support
On-screen help and operating instruction
Import/Export
Job, and Installation Setup parameters can be imported, or
exported via the USB port.
Mill Functions
Pitch Circle Diameter (PCD)
For calculating the positions of equally spaced holes around a
circle or part circle of a user-defined diameter
Arc contouring
Indicates the step by step machining of an arc or radius, without
the need for a rotary table
Line of holes
Calculates the equally spaced position of user-defined number of
holes along a straight line at any angle
Grid array
Calculates a user-defined grid pattern at any angle
Tool table
Store tool diameter and length offset information. Up to 16 tools.
Tool compensation
This allows workpiece dimensions to be entered directly, with
automatic compensation for tool radius.
Acu-Rite VUE 2 Axis Display Console
Technical Information
DIGITAL READOUTS
Radius mode will display physical travel. Diameter mode will
display work piece diameter.
Tool offsets
Store tool zero offsets, up to 16 tools
Axis summing
Display the combined travel of carriage and compound slide
Axis vectoring
Display the combined travel of carriage and compound slide taking
into consideration angle compound slide.
Taper calculations
Allows user to calculate taper of the job.
www.machine-dro.co.uk - Allendale Electronics Ltd, Pindar Road, Hoddesdon, Hertfordshire. EN11 0BZ.
Images & Content ©2010 Allendale Electronics Limited. E&OE - Specifications subject to change without prior notice.
+44 (0)1992 450780
Radius/Diameter display
machine-dro.co.uk
Lathe Functions
2 OF 3
®
Technical Information
Acu-Rite VUE 2 Axis Display Console
DIGITAL READOUTS
Dimensions
Connection and Input Signal
A
B
90°
-A
-B
Optional
•Fitted with 9 pin female D type connector for encoder input.
•For encoder compatibly please check compatibility chart datasheet.
A
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
N/C
A
-A
B
-B
0V
+5V
Z
-Z
BSignal
+44 (0)1992 450780
-Z
machine-dro.co.uk
Z
90°
Z
www.machine-dro.co.uk - Allendale Electronics Ltd, Pindar Road, Hoddesdon, Hertfordshire. EN11 0BZ.
Images & Content ©2010 Allendale Electronics Limited. E&OE - Specifications subject to change without prior notice.
3 OF 3