ByYourSide Sleeper 1_4 [4.12]

91150
Please read the following instructions
and warnings carefully.
Keep this instruction manual for future reference.
Tools required:
Phillips head screwdriver (not included).
For technical support, contact us at 1-800-268-6237
or www.summerinfant.com/contact
TO US E:
With the Sleeper fully extended, place between the pillows of the adult bed. The
back wall of the unit MUST BE against the headboard of the adult bed (Figure I).
Important Notes:
• When using for co-sleeping, ensure the Sleeper is correctly
positioned as recommended in these instructions for use.
• Make sure that adult bedding is securely tucked in at the
foot of the bed, so that it does not extend past chest level
of the adults in bed.
• Never stack pillows or leave decorative pillows on when
using the Sleeper - use only one pillow per adult.
• Discontinue use when infant begins to push up or roll over.
For use with children from 0 - 3 Months.
Discontinue use when infant
begins to push up or roll over.
INSTRUCTION MANUAL
I
By Your Side™ Sleeper
How to fold your By Your Side™ Sleeper
Step 1: Uncover center joints (Figure J).
IMPORTANT – Read the instructions carefully before use and keep them for future reference.
Step 2: Depress release button to disengage lock. Slide
locking mechanism in direction of arrow until an audible
click is heard (Figure K). Repeat on other side.
J
K
Step 4: Fold each leg using two hands, firmly press both
release buttons (one on each side) simultaneously and pull
towards the bottom of the Sleeper (Figure M). Repeat on
other leg.
L
Step 5: Unsnap strap from bottom middle of panel. Pass
strap over top of Sleeper, and secure to top middle snap
to use in carry mode (Figure N).
M
N
Summer Infant stands behind all of its products. If you are not completely satisfied or have any
questions, please contact our Consumer Relations Team at 1-800-268-6237 or
www.summerinfant.com/contact.
(For Europe call +44 (0)144 250 5000 or [email protected])
4
Summer Infant Europe, Ltd.
1st Floor North Wing
Focus 31, Cleveland Road
Hemel Hempstead, Herts
HP2 7BW UK
+44 (0)144 250 5000
FAILURE TO FOLLOW THESE WARNINGS AND THE
INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
WARNING - Do not leave child unattended.
FALL HAZARD – To help prevent falls, do not use this product when the infant begins
to push up on hands and knees or has reached 15 lb, whichever comes first.
Step 3: Fold Sleeper by lifting rounded ends (Figure L).
Summer Infant, Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-800-268-6237
WARNING:
©2011 Summer Infant, Inc.
Colors and styles may vary.
Please retain information for
future reference.
MADE IN CHINA.
4/12
SUFFOCATI
O
N
HAZARD
–
I
n
fants
have
suffocated:
• In gaps between an extra pad and side of the sleeper.
• On soft bedding.
NEVER add a mattress, pillow, comforter, or padding.
Use ONLY the pad provided by Summer Infant.
• Do not use this product if the adult mattress is not firm enough to allow the
product to lie flat when adults are on the bed.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be
placed on their backs to sleep, unless otherwise advised by your physician.
• NEVER use on a water mattress.
• NEVER move, lift or transport sleeper while child is in it.
• NEVER place unit on an elevated surface other than bed.
• NEVER use this product in a motor vehicle.
• NEVER use near stairs.
• NEVER leave child unattended.
• NEVER use product on a stand.
• NEVER place the product within 12 inches of the edge of the bed.
• ALWAYS use on flat, stable surfaces.
• ALWAYS keep product away from hazards that may injure your child.
(CONTINUED NEXT PAGE)
See page 4 for contact information to order replacement or additional products.
WARNING:
M AI NTENANC E:
(continued)
• DO NOT use if any part is broken, torn or missing.
• DO NOT let other children play unattended near the sleeper.
• This product is only suitable for a child who cannot sit up unaided, roll over and cannot
push itself up on its hands and knees. Maximum weight of the child: 15 lb.
• Use ONLY replacement parts supplied or approved by Summer Infant.
• Be aware of the risk of open fire and other source of strong heat, such as electric bar fires,
gas fires, etc., in the near vicinity of the sleeper.
• If a sheet is used with the pad, use only the one provided by Summer Infant or one
specifically designed to fit the dimension of the sleeper pad.
• Inspect product regularly for signs of damaged and wear.
STRANGULATION HAZARD: Strings can cause strangulation! Do not place items with a string
around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over
sleeper or attach strings to toys.
AVOID CO-SLEEPING HAZARDS:
• NEVER allow infant to sleep in the product while sharing a bed with another toddler or child.
• NEVER allow infant to sleep in the product while sharing a bed with an adult who is under
the influence of alcohol or medication. These substances increase the risk of rolling onto
the infant and make it harder for the adult to wake up at the baby’s distress.
• NEVER allow infant to co-sleep with an obese person.
• NEVER allow infant to sleep in the product while sharing a bed with an adult who has sleep
disorders (i.e. sleepwalking, nightmares, fitful sleep).
• NEVER use the product if it DOES NOT LIE LEVEL on the mattress when both parents are
on the bed.
• NEVER use the product anywhere else in the bed. Make sure that adult bedding does not
cover the product when bedding is fully extended, in order to reduce suffocation risks
and overheating.
• NEVER use more than one pillow per adult on each side of the product.
• ALWAYS place the product with the rear wall against the headboard when co-sleeping.
WARNING:
Prevent possible strangulation or entanglement.
Never use sleeper sheet unless it fits securely on sleeper pad.
F EATU RE S & C O MP ON E N T S :
(1) sleeper
(1) pad
(# 91330-01)
(1) fitted sheet
(# 91330-02)
includes pad and fitted sheet
mesh sides
so you can
always see
baby
soft, comfortable
fabrics
(4) feet
(# 91330-04)
(4) screws
(# 91330-05)
2
release button
on locking
mechanism
sturdy metal
frame
plastic feet (4)
Periodically inspect the By Your Side™ Sleeper for missing or damaged parts. Discontinue
use if parts are missing or damaged.
TO CL EAN :
Frame and Pad: Wipe clean with a damp cloth. Air dry.
Sheet: Machine wash warm with like colors. Use non-chlorine bleach only if needed.
Tumble dry, low heat.
SET UP:
How to set up the
By Your Side™ Sleeper
Step 1: Place plastic foot on corner of metal leg.
Using a Phillips head screwdriver, install screw
tightly (Figure A). Repeat until all 4 feet have been
installed on legs.
A
B
C
D
Step 2: Unsnap handle and secure strap to snap
on underside of Sleeper (Figures B and C).
Step 3: Unfold the Sleeper on a flat, stable surface.
Step 4: Secure each leg by pulling towards ends
until they “CLICK” and lock into place (Figure D).
Step 5: Gently push down on the round ends of
the Sleeper until frame is parallel with the surface
(Figure E).
Step 6: Uncover center joints (Figure F).
Step 7: Gently press the release buttons located
on the locking mechanisms on both sides of the
Sleeper (Figure G). Keep hands clear from joints.
(Mechanism will spring quickly into place
automatically).
Note: Make sure the red portion of the label is
covered. Check to see both sides are locked.
E
F
G
Step 8: Cover center joints (Figure H).
By Your Side™ Sleeper is ready to use!
H
3