DN-X1100

Transcription

DN-X1100
USE IT. LIVE IT.
DN-X1100
Professional 4-Channel Mixer
Features
An ideal companion piece to Denon DJ’s new DN-S3700
Digital Media Turntable, the DN-X1100 is a professional
12” tabletop rack-mountable analogue matrix that
provides users with a groundbreaking array of
technologies and features.
Unlike conventional mixers, the DN-X1100 uses Matrix
Input Assignment that enables DJ’s to freely assign the
eight separate input to any channel, or even multiple
channels, providing unprecedented flexibility.
In addition to its eight analogue line inputs three
phono switchable capability, the DN-X1100 features a
High Performance “Flex fader” (crossfader) with
tension adjustment and contour control. For level
control there are four smooth 60 mm VCA channel
faders, and a responsive 45 mm VCA crossfader. For
added flexibility, the crossfader features A-B Post
Channel assignment capability, and the Channel FaderStart Trigger is compatible with all Denon DJ
CD/MP3/Media players.
With its channel fader contour controls, the DN-X1100
allows DJs to express their craft with the subtlest and
most effective touches, enabling seamless smooth
traditional style fade-ins, as well as execute crowdpleasing audio cuts for performance scratching.
DISCOVER MORE AT WWW.DENONDJ.EU
• Matrix Input Assignment
• 8 Line / 3 Phono, switchable
• 4 Smooth 60mm VCA Channel Faders w/contour adjust
• Flex Fader 45mm VCA Cross Fader w/contour adjust
• Independent Channel PFL Meters
• Independent 3-Band EQ (High-Mid-Low) w/full kills
• Independent CUE system (all channels)
• Booth Output Assign Selector
• Pre-monitor any channel including Master through the
booth output in the same manner as you would with your
headphones, with volume control!
• External Send/Return Control
- Multi Channel Assignable, - Effect On/Off, - Effect Pre &
Post switch, - Effect Dry/Wet Knob
• Effect Cueing
• Independent Channel A-B Post Switch (crossfader)
• Powerful & Clean Headphone Output
• Fader Start (all channels)
• 2 Independent Mic inputs w/3-band EQ
- Main Mic (Neutrik combo terminal)
• Aux Mix (TRS 1/4” terminal)
• Mic Ducking Attenuation w/level control
• Split / Cue Headphone Monitor w/PFL Metering
USE IT. LIVE IT.
DN-X1100
Professional 4-Channel Mixer
Specifications
General
Maximum external dimensions:
Installation:
Weight:
Power supply:
Power consumption:
Environmental conditions:
320 (W) x 357 (D) x 91 (H) mm
Table-Top
6.2 kg
AC 120 V, 60 Hz (U.S.A. and Canada models)
AC 230 V, 50 Hz (European models)
17 W
Operational temperature:
5 to 35 °C (41 to 95 °F)
Operational humidity:
25 to 85 % (no condensation)
Storage temperature:
–20 to 60 °C (4 to 140 °F)
Audio Section
• Input Sensitivity & Impedance:
Main Mic:
Aux Mic:
Effect (Return):
3-Phono:
8-Line:
• Output level & Impedance:
Main (Balanced):
Main (Unbalanced):
Booth (Balanced):
Rec (RCA):
Effect (Send):
Headphone:
Frequency Response:
Line:
Phono:
Mic:
• Signal to Noise ratio:
Line:
Phono:
Main Mic:
• Total harmonic distortion rate:
Line:
Phono:
• Cross talk:
• Channel equalizer:
Hi:
Mid:
Low:
• Microphone equalizer:
Hi:
Mid:
Low:
–54 dBV (2.0 mV)
–60 dBV (1.0 mV)
–14 dBV (200 mV)
–50 dBV (3.0 mV)
–14 dBV (200 mV)
10 kΩ/kohms
10 kΩ/kohms
50 kΩ/kohms
50 kΩ/kohms
50 kΩ/kohms
4 dBm (1.23 V)
0 dBV (1.0 V)
4 dBm (1.23 V)
–10 dBV (316 mV)
–14 dBV (200 mV)
0 dBV (1.0 V)
600 Ω/ohms load
1 kΩ/ohms
600 Ω/ohms
1 kΩ/kohms
1 kΩ/kohms
32 Ω /ohms (33 Ω/ohms load)
20 to 20 kHz ±2 dB
20 to 20 kHz RIAA ±2 dB
20 to 20 kHz ±2 dB
82 dB
75 dB
65 dB
0 dBV, 1 kHz, EQ flat
0 dBV, 1 kHz, EQ flat
0 dBV, 1 kHz, EQ flat
Below 0.05 %
Below 0.05 %
Over 70 dB
+10 dB, –33 dB (16 kHz)
+10 dB, –35 dB (1 kHz)
+6 dB, –35 dB (60 Hz)
+12 dB, –12 dB (10 kHz)
+12 dB, –12 dB (1 kHz)
+12 dB, –12 dB (100 Hz)
* Specifications and design are subject to change without notice for purpose of improvement.
DISCOVER MORE AT WWW.DENONDJ.EU